2010 Engineering Technology Education Bibliography

13 downloads 238372 Views 349KB Size Report
“Best Practices for Partnerships and Recruitment from NSF Advanced Technological. Education (ATE) Programs.” CIEC. Bekhouhe, Noureddine. “What Is the ...
2010 Engineering Technology Education Bibliography Compiled by Marilyn A. Dyrud Oregon Institute of Technology

Introduction The 2010 bibliography lists books, articles, and proceedings papers related to engineering technology education under the following headings: administration, aerospace/aviation, architectural, assessment, biomedical/ biotechnology, civil, computers, curriculum, distance education, diversity, electrical/ electronics, faculty development, industrial, industry/government/employers, information technology instructional technology, international, laboratories, liberal studies, manufacturing, mechanical, nuclear, teaching methodology, tech prep/STEM, technical communication, and technical graphics. Several categories–instructional technology, liberal studies, teaching methodology, technical communication, and technical graphics–include listings reflecting general technical education concerns. Entries are listed according to area of primary emphasis, and items that apply to two or more academic disciplines are entered under the area of major interest. For example, ECET-related items are included under “Electrical/Electronic”; mechatronics papers are listed under “Mechanical.” We apologize for any entries that may have been missed or inadvertently placed in the wrong category.

Contributors Engineering technology educators interested in contributing to the bibliography may contact Marilyn A. Dyrud, Communication Department, Oregon Institute of Technology, 3201 Campus Drive, Klamath Falls, OR 97601; email: [email protected]; phone: 541.885.1504.

Abbreviations ACP ASEE 2010 Annual Conference Proceedings, June 20-23, 2010, Louisville, Kentucky. Proceedings are available on CD or at http://www.asee.org/conferences. ASME Proceedings of the 2010 ASME International Mechanical Engineering Congress & Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada.. Proceedings are available at http://www.asmeconferences.org/Congress2010/TechnicalProgramOverview.cfm. CIEC Proceedings of the 2010 Conference for Industry and Education Collaboration, February 3-5, 2010, Palm Springs, California. Proceedings are available on CD. EDGD Proceedings of the 65th Mid-Year Conference, October 3-6, 2010, Houghton, Michigan. Proceedings are available at http://edgd.asee.org/conferences/proceedings.htm. FIE Proceedings of the 2010 Frontiers in Education Conference, October 27-30, 2010, Washington, D.C. Proceedings are available on CD or at http://www.fie-conference.org/fie2010/index.htm. WIP denotes a “work in progress,” a short summary of ongoing research.

GSW Proceedings of the 2010 ASEE Gulf Southwest Section Conference. March 24-26, 2010, Lake Charles, Louisiana. Proceedings are available on CD. ICEE Proceedings of the 2010 International Conference on Engineering Education, July 18-22, 2010, Gliwice, Poland. Proceedings are available at http://www.ineer.org/. IL/IN Proceedings of the ASEE 2010 Illinois-Indiana Section Conference, April 9-10, 2010, West Lafayette, Indiana. Proceedings are available at http://ilin.asee.org/Conference2010/Purdue2010Proceedings.pdf. MIDAT1 Proceedings of the Fall 2010 ASEE Middle Atlantic Section Conference. October 15-16, 2010, Villanova, PA. Proceedings are available at http://www.asee.org/papers-andpublications/papers/section-proceedings/middle-atlantic/fall-2010. MIDAT2 Proceedings of the Spring 2010 ASEE Middle Atlantic Section Conference, April 16-17, 2010, Easton, Pennsylvania. Proceedings are available at http://www.asee.org/papers-and-publications/ papers/section-proceedings/middle-atlantic/spring-2010. MW Proceedings of the ASEE 2010 Midwest Section Conference. September 22-24, 2010, Lawrence, Kansas. Proceedings are available at http://www.asee.org/papers-and-publications/papers/sectionproceedings/midwest/2010. NC Proceedings of the ASEE 2010 North Central Section Conference, March 26-27, 2010, Pittsburgh, Pennsylvania. Proceedings are available at http://www.asee-ncsection.org/. WIP denotes a “work in progress,” a short summary of ongoing research. NE Proceedings of the ASEE 2010 Northeast Section Conference. May 7-8, 2010, Boston, Massachusetts. Proceedings are available on CD. NMW Proceedings of the ASEE 2010 North Midwest Section Conference, October 21-23, 2010, Mankato, Minnesota. Proceedings are available at http://cset.mnsu.edu/mece/asee/conf_papers_10.pdf. SEE Proceedings of the ASEE 2010 Southeastern Section Conference, April 18-20, 2010, Blacksburg, Virginia. Proceedings are available on CD or at http://155.225.14.146/ASEESE/PROCEEDINGS/ASEE2010/ASEE2010SE%20frame.htm. StL Abstracts for the ASEE 2010 St, Lawrence Section Conference, March 25-27, 2010, Rochester, New York. Abstracts are available at http://www.rit.edu/kgcoe/conferences/ASEE_Abtracts.pdf. Zone Proceedings of the 2010 Zone IV Meeting, March 25-27, 2010, Reno, Nevada. Proceedings are available on CD or at http://www.asee.org/uploads/papers-andpublications/papers/zoneIV/2010_Proceedings.pdf. WIP denotes a “work in progress,” a short summary of ongoing research.

Administration Barbieri, Enrique et al. “On B.S.E. and B.S.ET for the Engineering Profession.” Journal of Engineering Technology 27, no. 1 (Spring 2010): 42-46.

Barger, Marilyn. “Best Practices for Partnerships and Recruitment from NSF Advanced Technological Education (ATE) Programs.” CIEC. Bekhouhe, Noureddine. “What Is the Difference between Engineering and Engineering Technology?” CIEC. Buchanan, Walter W. “Engineering and Engineering Technology Industrial Advisory Boards.” GSW. Buchanan, Walter W. “The Origins, Development, and Evolution of the Engineering Technology Listserv.” Journal of Engineering Technology 27, no. 1 (Spring 2010): 36-40. Buchanan, Walter W., Alireza Rahrooh, Ali Mehrabian, and Kudret Yurtseven. “How Your Engineering and Engineering Technology Advisory Boards Can Aid in Fundraising for Your Programs.” GSW. Cooper, Cameron Ian. “A Generalizable Neural Network for Predicting Student Retention.” NE. DiDomenico, Charles F. “Lifelong Learning, Engineering and the Community College.” CIEC. Donaldson, E. Shirl, and Gary Bertoline. “Utilization of a Graduate Advisory Committee for Supporting and Retention of Graduate Students to Improve the Academic Experience and Increase Completion of Degrees.” CIEC. Dyrenfurth, Michael, Mike Murphy, and Gary Bertoline. “Quality Indicators for Engineering & Technology Education.” ACP. Ferguson, Chip, and George Ford. “Faculty Student Advising at Western Carolina University.” SEE. Ford, George, William McDaniel, and Paul Yanik. “Directions for Engineering and Technology Educators to Improve Program Enrollments.” SEE. Gorls, Tatiana, and Michael Dyrenfurth. “Students‟ Misconceptions in Science, Technology, and Engineering.” IL/IN. Grinberg, Ilya, Mohammed Safiuddin, and Chilukuri K. Mohan. “Methodological Aspects of Education Consortium to Address Challenges in Engineering Education.” International Transactions on Investment-Building and Housing and Municipal Complexes. Moscow State Academy of Municipal Economy and Construction, (2010):103-115. Gupta, Surendra et al. “Academic Performance and Cooperative Employment of Transfer Scholars in Engineering & Engineering Technology Programs.” ACP. Hadad, Alan. “Faculty Scholarship and Tenure Criteria.” CIEC. Hadi, Yasser Abdulaziz. “Seeking ABET Accreditation of Manufacturing and Mechanical Maintenance Technology Programs at Yanbu Industrial College.” MW. Iyer, Rupa. “Center for Life Sciences Technology–A Model for Integration of Education, Research, Outreach, and Workforce Development.” ACP. Kelnhofer, Richard, Robert Strangeway, Edward Chandler, and Owe Peterson. “Future of Engineering Technology.” ACP.

Khan, Saeed, Lucy Kollhoff, and Michael Kollhoff. “Finding Effective Pathways for Recruitment into Engineering Technology Programs.” ACP. Larson, Debra, and Marissa Mourer. “Student Recruitment by Faculty Phone-a-Thon.” Zone. Lin, Joe J., Kenneth J. Reid, and P. K. Imbrie, “Comparison of Four Methodologies for Modeling Student Retention in Engineering.” ACP. Liu, Q., and B. Garner. “Two Accreditation Visits and One Storm: A Narrative of Program Outcome Development.” GSW. Marshall, John. “Professional Internships: A Requirement for Graduation.” ACP. Moges, M.. F. et al. “Expanding the Quality of Mentoring Programs for Undergraduate Students– Observations and Challenges.” GSW. Nankivelli, Kim, Jana Worthington, and Joy Colwell. “Trends and Best Practices in Leadership for Administration of Information Technology Programs.” ACP. Pringle, Charles, and William Bender. “Educational Operations Four Days a Week.” ACP. Rogers, D. A., and O. R. Baiocchi. “Tenure: Observations and Consequences.” NMW. Spang, David, and Vladimir Genis. “Opportunities for Students and Faculty Stemming from Engineering Technology Program Reform.” ACP. Stier, Kenneth. “Transitioning a Technology Program to Outcomes-Oriented TC2K Criteria.” ACP. Tabas, Joseph, and William Lin. “A Life-Cycle Perspective of Engineering Technology Education.” ACP. Valentine, Maureen, and Carol Richardson. “A Long-Term Look at the Success of Rochester Institute of Technology Engineering Technology Graduates.” ACP.

Aerospace/Aviation Al-Masoud, Nidal, Viatcheslav Maoumov, and Zbigniew Prusak. “NASA Moonbuggy Senior Design Project as an Assessment Tool and Potential Career Path in Aerospace.” ACP. Dischino, Michele et al. “Go for Aerospace: High School Recruitment Program: Preliminary Outcomes, Lessons Learned, and Future Directions.” ACP. Gruar, Daryl. “Automation Process of „King Air‟ Aircraft–Cargo Door Design.” CIEC. Johnson, Mary. “Using Process FMEA in an Aeronautical Engineering Technology Course.” ACP. Miller, Craig, David Shaw, and Nicoletta Adamo-Villani. “A Collaborative Industry Project Partnership in the Development of a Virtual Assembly of a Commercial for the Future of Flight Museum.” CIEC.

Architectural Davis, Daniel. “Integrating Sustainability into a Studio Design Curriculum.” ACP. Ding, Suining. “Freehand Drawing vs. Transformed Digital Drawing: A Preliminary Study and Comparison.” ACP. Hedges, Keith F. “The 2010 Haiti Earthquake: Real-Time Disaster Inquiry in the Classroom.” MW. Kelceoglu, Bekir et al. “The DORMaTECHture Project: A Multi and Interdisciplinary Educational Experience.” ACP. LoPiccolo, Orla S. “Drawing Comparisons: „What I See, I Remember. What I Do, I Understand.” MIDAT1. LoPiccolo, Orla. “Using Supplemental Videos to Teach Energy Efficient Construction Systems: SIPs and ICF.” MIDAT2. Lassance, Guilherme, Patricia Figuiera Lassance, Elaine Vazquez, and Pedro Engel. “An Integrated Experience of Building Design: On the Educational and Scientific Role of a Professional Practice in the Academic Environment.” ICEE. Settlefield, Charles, Eric Dunn, and Russell Marcks.” “Simulating the Collaborative Design Process through a Multidisciplinary Capstone Project.” ACP. Zarzycki, Andrzej. “BIM as Design Exploration Tool in Architecture.” NE. Zarzycki, Andrzej. “Designing Curriculum for Digital-Native Architecture Students.” MIDAT2. Zarzycky, Andrzej. “First Year Experience for Digital-Native Students.” NE. Zarzycky, Andrzej. “Form-Making with Special Effect Simulations.” NE.

Assessment Attarzadeh, Farrokh, Enrique Barbieri, and Miguel A. Ramos. “How the Capstone Class Students Perceive Their Knowledge Base.” GSW. Balascio, Carmine, Thomas Brumm, and Steven Mickelson. “Competency-Based Assessment of Engineering Technology Program Outcomes.” ACP. Basinet, Badri, Lyn Brodie, and John Worden. “Peer Assessment of Assignment.” FIE. Blake, John. “Technological Literacy: EAC, ABET, and TAC ABET Interrelationships among STEM Disciplines.” ACP. Caplan, Marelo. “Exploring a Valid and Reliable Assessment of Engineering and Technology Education Learning in the Classroom.” ACP.

Castro-Cedeno, Mario, and Quamrul Mazumder. “Motivation and Maturity of Engineering and Engineering Technology Students with and without Coop Experience.” ACP. Custer, Sheryl, Harriet Lamm, David Ramirez, and Kuruvilla John. “Measurement of Success: An Overview of the Impact of Summer Research Opportunities for Community College Students.” ACP. Danley, William, and Vladimir Genis. “Continuous Quality Improvement Process for Applied Engineering Technology Program at Drexel University.” ACP. Garry, Byron. “Using Webpages to Document and Assess Student Capstone Project Work.” NMW. Gomez-Rivas, Alberto, Lea Campbell, and George Pincus. “Cost of Assessment in Engineering Technology Programs.” ACP. Greco, Edward et al. “Efficacy of a Final Lab Practicum and Lab Reports for Assessment in a Fundamentals Electric Circuits Laboratory.” MW. Guo, Minzhe, Kai Qian, Li Yang, and Prabir Bhattacharya. “A Real Time Java Programming Online Assessment System.” WIP. FIE. Jones, Daniel, and Anglo Tadros. “Successful Use of Rubrics to Assess Student Performance in Capstone Projects.” ACP. Jones, Allen L. “A Metric Outcome for Assessment of ABET Accreditation Outcome 3B–Designing Experiments and Analyzing the Results.” NMW. Kalaani, Youakim, and Shanda Bernadin. “An Outcomes-Driven Approach for Assessment: A Continuous Improvement Process.” ACP. Mak, Gong, and Jessica Kelly. “Systematic Means for Identifying and Justifying Key Assignments for Effective Rules-Based Program Evaluation.” FIE. Malvezzi, William R., Andreza B. Mourlio, and Graça Bressan. “Learning Evaluation in Classroom Mediated by Technology Model Using Fuzzy Logic at the University of Amazonas State.” FIE. Mehrabian, Ali, Walter Buchanan, Tarig Ali, and Saeid Moslehpour. “Faculty Practices in Effective Online Student Assessment in Engineering and Technology.” ACP. Menhart, Steve. “Embedding Assessment into the End of Course Evaluation Form” GSW. Nepal, Birmal, Jaby Mohammed, Jihad Alberyyari, and Paul Lin. “Program Assessment and Continuous Improvement Plan for Master of Science in Technology.” ACP. Ossman, Kathleen. “An Assessment and Data Collection Process for Evaluating Student Progress on „AK‟ ABET Educational Outcomes.” ACP. Santiago-Román, Aidsa, Ruth A. Streveler, and Louis DiBello. “The Development of Estimated Cognitive Attribute Profiles for the Concept Assessment Tool for Static.” FIE.

Sarker, Nripendra N., Mohan A. Kethar, and Cajetan M. Akujuobi. “Closing Loop for Continuous Improvement.” GSW. Seybert, Thomas A. “Dual Criteria Grading for Improved Learning.” Journal of Engineering Technology 27, no. 2 (Fall 2010): 30-35. Seybert, Thomas A. “Using Course Outcomes Achievement for Assigning Student Grades and Improving Learning.” CIEC. Seybert, Thomas A. “Using an Industrial Advisory Council for Student Outcomes Assessment: A Work in Progress.” The Technology Interface International Journal 11, no. 1 (Fall/Winter 2010): 53-59. http://www.tiij.org/issues/winter2010/files/TIIJ%20fall-spring%202010-PDW2.pdf. Vernon, Tanya. “The Stories Statistics Don‟t Tell: Using Quantitative Data to Enhance Findings about Student Learning.” ASME. Paper no. 40195. Walk, Steven. “Student Surveys of Course Knowledge and Skills: Improving Continuous Improvement.” ACP. Westheider, Virginia, and Sarai Hodges. “Employing Six Sigma as a Tool for Continuous Improvement in Engineering Technology Education.” ACP. White, Su, and Alastair Irons. “How Formative Feedback Enhances the Student Learning Experience.” WIP. FIE. Willey, Keith, and Anne Gardner. “Perceived Differences in Tutor Grading in Large Classes: Fact or Fiction?” FIE. Wright, Geoffrey, Braden Boss, Daniel Bates, and Ronald Terry. “Assessing Technology Literacy and the Use of Engineering and Technology Curricula by Utah K-12 Educators.” ACP.

Biomedical/Biotechnology Dao, Duy K. “Design of Lab Experiments on Signal Processing Applied to Solving Biomedical Problems.” MIDAT1. Kitto, Kathleen. “Measuring Differences in Student Outcomes in a Basic Materials Engineering Course– From Collaborative Experiences Focused on Biomedical Applications.” ACP. Raj, Rajemdra K., and Richard Savacool. “Experiences with Teaching Secure Data Management.” FIE. Rajaravivarma, Veeramuthu. “Wireless Sensor Network for Intravenous Fluid Level Indicator Application.” ACP.

Civil Bandyopadhyay, Amit. “A Study in Learning Styles of Construction Management Students.” MIDAT1. Bandyophyay, Amit. “Teaching LEED Concepts to Non-Technical Professionals.” CIEC.

Barroso, Luciana R., and James R. Morgan. “Incorporating Peer Review of Course Term Project in Structural Analysis Course.” FIE. Bumgartner, Ronald, George Ford, and John Patterson. “Improving Status Instruction in Four-Year Technology Programs.” SEE. Duggan, John W. “Teaching Sustainable Design in Construction: A Module on the Recycling and Reuse of Urban Soil, Stone, Fill and Related Construction Material.” NE. Ford, George D., and Walter W. Buchanan.” “Environmental Scanning for Industrial Advisory Committee Planning in a Construction Management Educational Program.” GSW. Ford, George, Jack Patterson, and Bradford Sims. “Recruiting and Retention Strategies for Construction Employers in the United States.” SEE. Foust, Henry, and George Watt. “Freshman Capstone Experience: Land Development Project.” GSW. Hunt, Brad et al. “Go with the Flow: Describing Storm Water Runoff Rates, Using the Derivative.” ACP. Lutey, Whitney, and Penny Knoll. “An Overview of Teaching Construction Safety to CET/CM Students.” ACP. Miers, Ronald, and George Ford. “Scholarship of Engagement and Project-Based Learning: ExperientialBased Learning Project for Construction Management Students at Western Carolina University.” ACP. Moghadam, Bahar Zoghi. “Introduction [to] an Innovative Method to Enhance a Senior Level Course in Water Sustainability.” MIDAT1. Moghadam, Bahar Zoghi. “Route to a Resourceful Water Efficiency Exploration: Residential Water Usage of Water Efficiency Section of USGBC, LEED Program.” MIDAT2. Oncul, Fatih, and Kostadin Marinov. “An Undergraduate Research Experience: Effect of Fly Ash on the Strength of Light Weight Concrete (LWC).” GSW. Reed, Douglas, Robert Martinazzi, and Jerry W. Samples. “A Necessary Jump from Engineering Management to Engineering Leadership: Team Teaching, Team Learning.” WIP. NC. Shaurette, Mark. “The Emergent Necessity for Demolition and Reconstruction Content in the Construction Technology Curriculum.” ACP. Soller, Michael, and Daphne Koch. “Industry Collaboration through a Technical and Leadership Lecture Series within a Construction Management Curriculum.” ACP. Tito-Ezquierdo, Jorge, and Alberto Gomez-Rivas. “Structural Evaluation of a Truss Pedestrian Bridge.” ACP.

Computers Azemi, Asad, and Nannette D‟Imperio. “Enhanced Delivery for Introductory Computer Science Courses.” WIP. FIE. Earnest, Andrew et al. “WRMT Case Study: GIS with Rule-Based Expert System.” ACP. Harding, Troy. “Utilizing Pair Programming Techniques in a Web Development Course.” MW. Hasan, Muhammad Zafrul. “Computer Architecture Design and Analysis Involving Reconfigurable Hardware Platform.” GSW. Hasan, Muhammad. “Computer Architecture Education and Research Involving Reconfigurable Hardware Platform.” ACP. Helps, C. Richard. “Structure of Course Design in Rapidly Evolving Computer Disciplines.” ACP. Jasani, Hetal. “Mobile and Wireless Networks Course Development with Hands-On Labs.” ACP. Kavianpour, Alireza, Ricardo Monterrosa, and Rammy Badran. “Automated Luggage Tracking System.” ACP. Kohn. Daniel. “Construction and Implementation of a Mobile Robot Platform on a Microcontroller/ Interfacing Class.” SEE. Li, Tianyi, Walter E. Thain, Jr., and Thomas Fallon. “On the Use of Virtualization for Router Network Simulation.” ACP. Long, James. “Outsourcing in Next-Generation Technical Software Engineering Education.” ACP. Luo, HongLi. “Enhancing Learning in Data Communication and Networking with Home Network.” ACP. McDonald, David. “Introductory LabVIEW Real Time Data Acquisition Laboratory Activities.” WIP. NC. Mazzei, Arnaldo. “On the Use of Simulation Software to Enhance Student Understanding of Dynamics.” Computers in Education Journal 20, no. 2 (April-June 2010): 62-71. Miertschein, Susan L., and Cheryl L. Willis. “Cloud Computing for the Classroom.” GSW. Miertschein, Susan, and Cheryl Willis. “An Experience with Cloud Computing in the Classroom.” ACP. Navarro, Andres, and Juan V. Pradilla. “Serious 3D Game for Mobile Networks Planning.” WIP. FIE. Oconnor, Terrence, Ben Sangster, and Erik Dean. “Using Hacking to Teach Computer Science Fundamentals.” StL. Ohno, Asako. “A Novel Methodology to Reduce Instructors‟ and Students‟ Psychological Burdens in Source Code Plagiarism Detection.” WIP. FIE. Patel, Nipul. “Wireless Networks in the Health Care Industry: A Disconnect.” ACP.

Pears, Arnold N. “Enhancing Student Engagement in an Introductory Programming Course.” FIE. Qian, Kai, and Chia-Tien Dan Lo. “Bring Green Computing to CS Core Curriculum with a Portable Lab.” WIP. FIE. Qian, Kai, XiaoLin Hu, and Chia-Tien Dan Lo. “Integrated Embedded Systems into CS Curriculum with Labs-in-a-Box Courseware.” WIP. FIE. Redkar, Sangram et al. “Using Internal Measurements to Sense Crash-Test Dummy Kinematics.” International Journal of Modern Engineering 10, no. 2 (Spring/Summer 2010): 10-16. Rosiene, Carolyn Pe, and Joel A. Rosiene. “Fostering Student Involvement and Collaboration in a NonMajors‟ Programming Course.” FIE. Simon, Daniel C., and Brian P. DeJong. “Robot Sound Source Localization Using a Host Computer.” NC. Srinivasan, Thyagarajan. “Computing across the Curriculum.” ICEE. Sutherland, George. “Software Teaching Software Use.” StL. Tan, Song, Kai Qian, and Xiang Fu. “Intelligent Project Failure Analysis.” WIP. FIE. Vu, Ky. “A Paradigm Shift in Data Security.” CIEC. Winstead, Vincent. “Integrating Hardware and Software Filtering in Embedded System Audio Data Processing: An Embedded Systems Course Project.” NMW. Zhou, Xuefu, Xiaodong Yue, and James Everly. “Computer Projects Designed to Enhance Students‟ Learning Experience with Public-Key Cryptography.” ACP.

Curriculum Agrawal, Jai, Omer Farook, and Chandra Sekhar. “A Graduate Certificate in Efficient Energy Technology.” ACP. Alba-Flores, Ricio, and Youakim Al Kalaani. “Enhancing the Learning Experience in a Multidisciplinary Engineering Technology Course.” ACP. Attarzadeh, Farrokh, Enrique Barbieri, and Miguel Ramos. “Enhancing the Undergraduate Experience in a Senior Design Context.” ACP. Barbe, David, James Green, and Dean Chang. “25 Years of Technology Entrepreneurship.” ACP. Bendkowski, Jacek. “Cultivating Virtual Communities of Learning.” ICEE. Blake, John. “Technological Literary and First-Year Courses for Engineering and Engineering Technology Programs.” ACP.

Buchanan, Walter W. et. al. “Curriculum Development and the Challenges of the 21st Century.” Proceedings of the 2010 International Conference on Engineering and Technology Education, March 7-10, 2010, Ilheus, Bahia, Brazil: 206-207. Buchanan, Walter W. et. al. “Integrating Technical Innovation and Design into the Engineering and Engineering Technology Curriculum.” Proceedings of the 2010 International Conference on Engineering and Technology Education, March 7-10, 2010, Ilheus, Bahia, Brazil: 208-209. Castro-Cedena, Mario, and Quamrul Mazumder. “Motivation and Maturity Level of Engineering and Engineering Technology with and without Coop Experience.” ACP. Cecere, Joseph J., and Sofia Vidalis. “Penn State‟s Two Step Bachelor Degree (A Hop Skip Approach).” CIEC. Chanley, Paul, Michael Pelletier, Linda Desjardins, and Lori Heymans. “A Green Technology Course in a Community College.” ACP. Cochrane, Phillip. “Collaborations and Challenges: Motor Sports Studies at Indiana State University.” CIEC. Cook, Kenneth, Donald Reimer, and Sabah Abro. “Entrepreneurial Experiences and Intellectual Property: A Student Perspective.” ACP. Dabipi, Ibibiam, Christopher Hartman, and James B. Burrows-Mcelwain. “Design of a Bungee Launch System to Support a Kite-Based Lifting Platform for Aerial Imaging.” ACP. Desai, Anoop, and Phil Waldrop. “ET Contribution to University Core Curriculum through a Course on Sustainability.” ACP. Dobrowski, Thomas . “Proposed Freshman Experience Course.” ACP. Dubikovsky, Sergey, Alten F. Grandt, Thomas A. Goodrich, and Ronald Sterkenburg. “Undergraduate Capstone Projects Integrate Technology and Engineering Programs.” ICEE. Dyrenfurth, Michael et al. “Concurrent Masters [sic[ Degrees across the Atlantic: Innovations, Issues & Insights.” ACP. Estell, John, Kenneth J. Reid, and Jed Marquart, “Addressing Third-World Poverty in First-Year Capstone Projects: Initial Findings,” ACP. Fischer, Jim, and Claude Kansuku. “An Applied Mathematics/Software Engineering Co-Development Project to Dynamically Predict High-Altitude Balloon Position Using Quasi Real-Time Data.” WIP. Zone. Ford, George and Robert Anderson. “Developing an Engineering Technology Curriculum–A Case Study at Western Carolina University.” ACP. Frempong, Stephen. “Bringing out the Best from the Engineering Technology Students through a Senior Project Course.” ACP.

Genis, Vladimir, Siddarth Vyras, Tony Midora, and Richard Bottari. “Industry-University Collaboration in Course Development and Instruction.” CIEC. Genis, Vladimir, William Danley, Warren Rosen, and Shawn Racz. “Capstone Course Sequence for Engineering Technology Students.” ACP. Ghemri, Lila, Sovondrara Chea, Lisa Bickems, and Timothy Rychlec. “TAME: A University Sponsored Undergraduate Capstone Design Project.” CIEC. Gilbert, Richard et al. “Implementing Engineering and Technical Education to Support Florida‟s 21st Century Energy Sector.” ACP. Goulding, Tom. “Lessons from Socrates and the Online Classroom: Achieving Exceptional Performance in Project-Based Classroom.” NE. Grebski, Wes, and Shaobiao Cai. “Meeting Educational Needs of the Sustainable Energy Industry.” ICEE. Grossfield, Andrew. “The Natural Structure of Algebra and Calculus.” ACP. Grossfield, Andrew. “Technical Enrollments and Mathematical Pedagogy.” MIDAT2; ACP. Hylton, Pete. “The Process of Designing a Design Process: An Outside-the-Box Engineering Technology Capstone Course.” FIE. Ibeh, Christopher. “Nanoscale Trends, Opportunities and Emerging Markets.” MW. Jang, Sunghoon, and Kenneth Markowitz. “Initiating the Undergraduate Research Study through the NYC-LSAMP Summer Fellowship.” SEE. Jang, Sunghoon, Kenneth Markowitz, and Aparicio Carranza. “Developing a Senior Capstone Project Course in Integrating Undergraduate Teaching and Research.” MIDAT2. Johnson, Michael, and Akshay Parthasarathy. “A Student Project Examining Alternative Assessment Methods for Structural Components.” ACP. Kanematsu, Hideyuki et al. “Conversation Analysis of PBL in Metaverse for Students from the USA, Korea and Japan.” ICEE. Khorbotly, Sami, and Kenneth J. Reid. “Draw Bridge Design: An Interdisciplinary, Project-Based Capstone Course for Freshman Engineering Students.” ACP. Konger, Elif, and Kurt A. Rossentrater. “Greening the Engineering and Technology Curriculum via Real Life Hands-On Projects.” NE. Krupczak, John et al. “An Infrastructure to Facilitate the Creation of Courses on Technology and Engineering for Non-Engineers.” ACP. Lambert, Steve. “Sustainable Design throughout the Curriculum.” International Journal of Engineering Education 26, no. 2 (2010): 401-407.

Libros, Randy, and Kathleen Harter. “ASET 101: Science, Technology, and Public Policy: Increasing Technological Literacy among Community College Students.” ACP. Loerndorf, William, Donald Richter, and Danny Teachman. “Results from an Interdisciplinary Service Learning Pilot Project Incorporating Universal Design Concepts for ADA Compliance.” ACP. Marelova, Gerry, Vladimir Genis, and David Spang. “Collaboration among Universities and Community Colleges in Developing Dual-Enrollment Programs.” ACP. Mariga, Julie R. “Developing an Engineering Technology Course Focused on Virtual Teams and Global Information Technology.” CIEC. Mohammed, Jaby, Sana Nawez, and Reynaldo Pablo. “Implementing LEED Course Contents in the Bachelors [sic] Curriculum.” ACP. Moraño, Jose A., and Luis M. Sánchez Ruiz. “Mathematics for Engineering from a Platform Based in the Project Sakai.” ICEE. Munukutla, Lakshmi. “Arizona-Texas Consortium for Alternative and Renewable Energy Technologies.” ACP. Myers, Todd, and Ben Stuart. “Teaching Engineering and Technology Public Policy While Fulfilling Multiple ABET and University Requirements.” ACP. Nagchaudhuri, Abhijit et al. “Broadening Student Research Experiences through Summer Exchange Programs across Campuses.” ACP. Narayanan, Aarti, and Ganapathy Narayanan. “On Maplet Development and Programming Tutorial for Science and Engineering Students.” ACP. Nelson, Megan Sapp, and Michael Frosmire. “Engineering Librarian Participation in Technology Curriculum Redesign: Lifelong Learning, Information Literacy, and ABET Criterion 3.” ACP. Oh, Hyounkyun, Asad Yousef, and Sujin Kim. “Contemporary College Algebra Course.” ACP. Otey, Jeffrey M., and Matthew M. Whiteacre. “Mathematical Modeling and Physical Testing of Trusses in an Introductory Freshmen [sic] Engineering Program.” GSW. Pembridge, James, and Marie Paretti. “The Current State of Capstone Design Pedagogy.” ACP. Razani, Mohammad. “Future Directions in Engineering and Technology Education.” GSW. Reid, Kenneth J., and John K. Estell. “Development of Personas: Emphasizing Human Need in a FirstYear Engineering Capstone Course.” WIP. FIE. Reid, Kenneth J., and John Estell, “Incorporation of Poverty Alleviation in Third-World Countries in a First-Year Engineering Capstone Course.” Proceedings of the Capstone Design Conference, June 7-9, 2010, Boulder, Colorado. Robert, Jean-Marc. “A Study of Teaching Courses Both in Class and at a Distance.” ICEE.

Robertson, John. “Course Change as a Darwinian Process.” ACP. Robertson, John, Louis Frenzel, and Tom McGlew. “A Systems View of Technology Curricula.” ACP. Rodriguez, Jorge, Alamgir Choudhury, and Luis Rodriguez. “Applying Design Process to Redesign a Personal Care Product–Integration of Technical and Marketing Issues.” ACP. Rose, Andrew. “Making Service Count: Advice for New Engineering Educators.” ACP. Shepard, Thomas. “The Use of Extra Credit to Improve Course Design.” NMW. Shih, Hui-Ru, and Wilbur Walters. “Modeling, Control and Application of Piezoelectric Actuators.” ASME. Paper no. 37183. Simoneau, Robert, and Diane Dostie. “The Virtual Ideation Platform.” NE. Solarek, Daniel et al. “Integrating Computer Science and Engineering Technology to Implement an ABET Accredited Program.” ACP. Somerton, Craig. “An Appropriate Technology Project: A Solar-Powered Vaccine Refrigerator.” ACP. Thomas, Charles, Loren Byrne, and Jeremy Campbell. “Creating an Interdisciplinary Introduction to Sustainability Studies Course.” NE. Wu, Huanmei. “Project Based Multidisciplinary Education for Undergraduates.”ACP. Wu, Yi, and Oladipo Onipede. “Evolution of a System Dynamic Course at Penn State Behrend.” WIP. FIE. Yildiz, Faruk. “Building Tomorrow: A Study of Renewable Energy Students [sic] Built Renewable Energy Training Unit.” GSW. Yildiz, Faruk, and Keith Coogler. “Development of a Renewable Energy Course for a Technology Program.” ACP. Yildiz, Faruk, and Keith Coogler. “Students [sic] Built Educational Renewable Energy Training Units.” ACP. Young, Cynthia et al. “EXCEL in Mathematics: Applications of Calculus.” ACP. Yurtseven, Kudret and Buchanan, Walter W. “Cognitive System Design and Business Process Management.” Proceedings of the 2010 International Conference on Engineering and Technology Education, March 7-10, 2010, Ilheus, Bahia, Brazil: 210-214.

Distance Education Anwar, Sohail, Jane LeClair, and Arnie Peskin. “Development of Nanotechnology and Power Systems Options for an On-Line BSEET Degree.” ACP.

Cho, Chung-Suk, and Stephen Kuyath. “The Effect of Panopto on Academic Performance and Satisfaction of Traditional-Distance Education Students.” ACP. Emend, Susan. “Providing Access to Technology Degrees: The Strategic Use and Evaluation of Distance Learning Technologies.” EDGD. Farook, Omar, Jai Agrawal, Chandra Sekhar, and Essaid Boutache. “Designing of a Course Content Server for the Distance Learning Delivery Format.” ACP. Kanabar, Vijay, Virginia Grieman, and Jim Cormier. “Communication and Collaboration in an Online Masters [sic] Degree.” NE. Kanabar, Vijay, and Robert Schudy. “Teaching a Project-Based Web Development and IT Project Management Course at a Distance.” NE. Kumar, Amruth N. “The Effect of Soliciting Demographic Data on the Performance of Students on Online Tests.” FIE. Little-Wiles, Julie, Stephen Hundley, and Erich Bauer. “Designing an Online Learning Management System for a Growing Student Population: The Urban Commuter Student.” ACP. Nichols, Argie Nell, Debra Steele, and Earlene Washburn. “The Details Make a Difference When Delivering Technology Courses via Web-Based Distant Education.” FIE. Pioro, Barbara T. “Performance on Collaborative Tasks in Blackboard Chat Rooms and Immersion in Internet-Based Social Networks.” ICEE. Shelley, Jeigh. “Technology to the Rescue! Lessons Learned from Forced On-Line Streaming of Dynamics Class.” Zone. Steele, Debra, Sydney Fulbright, and Argie N. Nichols. “Age and Technology: Adult Learning Performance in Desktop Virtual Reality Environments.” FIE. Trekles, Anastasia, and Shoji Nakayama. “Identifying Adequate Level of Instruction without Hindering Deeper Learning in Distance Learning.” WIP. FIE.

Diversity Bhatnagar, K. “Engineering Technology and Gender: Enhancing Voice and Access for Minority Groups by Curricular Design for Distance Learning.” Proceedings of the Third International MultiConference on Engineering and Technological Innovation, June 29 - July 2, 2010, Orlando, Florida: 176-180. Caston, Simone B., Naira H. Campbell-Kyureghyan, and Karen Cooper. “The Perceived Impact of a Mandatory Tablet Personal Computer (TPC) Program on Underrepresented Students.” NC. Ciston, Shannon, Ellen Worsdall, and Jessica Swenson. “Summer Technology and Engineering Program: An Outreach Program Benefitting Women Engineering Students from Middle School through Graduate School.” ACP.

Ćwikla, Grzegorz, Adrian Kampa, and Grzegorz Golda. “E-Learning Platform as a Support in the Technical Education of Disabled People.” ICEE. Enriquez, Amelito. “Improving the Participation and Retention of Minority Students in Science and Engineering through Summer Enrichment Program.” Zone. Martinez, Denise et al. “First Year Retention of Hispanic, First-Generation Students.” WIP. FIE. Milgram, Donna, and Daniella Severs. “Cal Women Tech Project: Recruiting and Retaining Women in Technology Programs.” ACP. Ocon, Ralph, and Opal McFarlane. “Women and Leadership: Preparing (Female) Students for the Leadership Challenge.” ACP. Sanchez, Maria C., Nell Papavasilou, and Hernan Maldonado. “GIRLS SEE Summer Camp: An Event for Future and Current Female Engineering Students.” Zone. Sorkin, Sylvia, and Mary Elizabeth Gore. “Attracting and Retaining Women and Underrepresented Groups in Engineering, Science, and Related Programs.” ICEE. Strayhorn, Terrell L. “Diversifying STEM: Underrepresented Students‟ Experiences in Undergraduate Research Programs.” WIP. FIE. Strayhorn, Terrell L. “Social Barriers and Supports to Underrepresented Minorities‟ Success in STEM Fields.” WIP. FIE. Study, Nancy. “Long-Term Impact of Improving Visualization Abilities of Minority Engineering and Technology Students: Preliminary Results.” EDGD.

Electrical/Electronics Alaraje, Nasser, and Aleksander Sergeyev. “Developing an Industry-Driven Graduate Certificate in Test Engineering for Electrical Engineering Technologists.” ACP. Alarje, Nasser, and Aleksander Sergeyev. “Developing a Digital Logic Design Curriculum in Electrical Engineering Technology: Bridging the Gap between Industry and Academic.” The Technology Interface International Journal 11, no. 1 (Fall/Winter 2010): 47-52. http://www.tiij.org/issues/ winter2010/files/TIIJ%20fall-spring%202010-PDW2.pdf. Anwar, Sohail, Janet LeClair, and Arnie Peskin. “Development of Nanotechnology Concentration for an On-Line BSEET Degree.” CIEC. Baig, Muhammad M., and Rafiqul Islam. “The Lab Workshop Models on Microchip‟s PIC Microcontrollers in EET Program.” GSW. Ball, Aaron, and Jonathan S. Busick. “A Low-Cost Conveyor System for Teaching Automation to Engineering Technology Students.” SEE.

Bilen, Sven, and Okhtay Azarmanesh. “Experiences with Student-Developed Software-Defined Radios in the Smart Radio Challenge.” ACP. Boglione, Luciano. “Designing Printed Circuit Boards for Microwave Engineering Applications: A Teaching Tool for Engineering Technology Students.” ACP. Boylestad, Robert L. Introductory Circuit Analysis. 12th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Duthie, Nathan, and Brian P. DeJong. “Mobile Star Finder.” NC. Edwards, Robert, and Gerald Recktenwald. “A Guided Inquiry Approach to Teaching Fan Selection.” ACP. Evans, William Ted. “A PLC Achievement Test.” NC. Everly, James, and Delmer Nicholson. “Controlling a Power Supply via the Internet Provides a Capstone Design Experience in Topics of Applied Design.” ACP. Fallon, Tom. “Methods for Increasing Enrollment in a Telecommunications Engineering Technology Program.” SEE. Flikkema, Paul, Jeff Frolik, Carol Haden, and Tom Weller. “Experiential Learning of Complex Engineered Systems in the Context of Wireless Sensor Networks.” ACP. Floyd, Thomas L. Electric Circuits Fundamentals. 8th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Floyd, Thomas L. Principles of Electric Circuits: Conventional Current Version. 9th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Floyd, Thomas L. Principles of Electric Circuits: Electron Flow. 9th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Floyd, Thomas L., and David M. Buchla. Electronics Fundamentals: Circuits, Devices, & Applications. 8th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Fotouchi, K., and Susan Cooledge. “Microcontroller Controller Walking Robot.” ACP. Goulart, Ana, and Andrew Helton. “A New Course on IP-Based Emergency Communications.” GSW. Grinberg, Ilya, Mohammed Safiuddin, Chilkuri Mohan, and Steven Macho. “Multi-Institutional Approach to Engineering Education.” ACP. Guo, Liping, and Said Oucheriah. “Design of a DSP-Based Fuzzy Controller for a Boost Converter.” Journal of Engineering Technology 27, no. 2 (Fall 2010): 36-40. Harding, G. L. “A Cost-Effective Lab Device for Studying Thyristors,” The Technology Interface 10, no. 3 (Spring 2010). http://technologyinterface.nmsu.edu/Spring10/. Hassell, Trever J., Aurenice M. Oliviera, and Wayne W. Weaver. “Control Development for Undergraduate Exposure.” FIE.

Hergert, David. “Instrumentation Based Mobile Laboratories for an Electromechanical Engineering Technology Distance Education Program.” ACP. Islam, Rafiqul. “Green Initiative in Campus Followed by Curriculum Development of a Course Concentrating on Selected Choices of Alternative Energy Sources in EET Program in Terms of Global and Environmental Impacts.” ACP. Khan, Admed, Velma Zlatkova, Azeem Mohammed, and Adrian Walid. “A Team-Based ECET Capstone Project: Design and Implementation of a Solar Insulation Measurement System.” ACP. Kurinec, Santosh, Sean Rommel, Dale Ewbank, and Karl Hirschman. “Summer Innovation Experience for Undergraduates in Semiconductor Technology.” FIE. Land, Ronald. “Development of a Prototype Nationally-Normed Assessment Exam for EET Programs.” CIEC. Land, Ronald. “First Use of a Prototype Nationally-Normed Assessment Exam for EET Programs.” ACP. Lashway, Christopher, and Peter Idowu. “Adaptation of a Commercial UPS System, for Energy Systems Education.” ACP. LeClair, Janet, and Li-Fung Shih. “Implementation of a Systematic Outcomes Assessment Plan to Ensure Accountability and Continuous Improvement in a Non-Traditional Electronics Engineering Technology Program.” ACP. Lee, Shiyoung, “Development of a Four-Story Elevator System for Teaching Motion Control Concept with Programmable Logic Controller.” ACP. Litwhiler, Dale. “MEMS Accelerometer Investigation in an Undergraduate Engineering Technology Instrumentation Laboratory.” ACP. Loker, David. “Elevator Control System Project.” ACP. Mehta, Shalin et al. “An Interactive Learning Environment for DSP.” ACP. Mullett, Gary. “It‟s 2010 and the New Electronics Technology Paradigm Is Emerging.” ACP. Mullett, Gary. “Smart Grid, Cleantech, Sensor Networks Come of Age.” ACP. Osborn, Charles Greg. Embedded Microcontrollers & Processor Design. Upper Saddle River, NJ: Prentice Hall, 2010. Petruzella, Frank D. Electric Motors and Control Systems. New York: McGraw-Hill, 2010. Prawdzik, Nicholas and Brian DeJong. “Accelerometer-Driven RC Car.” NC. Rahrooh, Alireza, Faramarz Mossayebi, and Walter Buchanan. “A Microprocessor Controlled Status VAR Compensator for the Excitation of an Isolated Induction Generator.” ACP. Rehg, James, and Glenn Sarton. “Instructional Algorithms Enhance Student Understanding of PLC Ladder Logic Programming.” ACP.

Reisdorff, Michelle Peterson. “Fuzzy Logic on an FPGA.” NMW. Richardson, Jeffrey, and Leslie Reed. “Improving Innovation by Enhancing Creative Capabilities in Electrical and Computer Engineering Technology Students.” ACP. Rios-Gutierrez, Fernando. “New Approach for Teaching a Microcontrollers System Design Course for Engineering Technology.” ACP. Rios-Gutierrez, Fernando, and Youakim Al Kalaani. “Enhancing Electrical Engineering Technology Capstone Senior Design Course Experience through Industry-Based Projects.” ACP. Snyder, Gary. Introduction to MultiSim for the DC/AC Course. Upper Saddle River, NJ: Prentice Hall, 2010. Sykam, Srinivasulu, and Gale Allen, “Dynamic Signal Analyzer Developed with LabVIEW-RF Tools.” NMW. Tan, Li, and Jean Jiang. “Improving Digital Signal Processing Course with Real Time Processing Experiences for Electrical and Computer Engineering Technology Students.” ACP. Wang, Guoping. “Preview, Exercise, Teaching, and Learning Digital Electronics Education.” ACP. Winstead, Vincent. “Residential Wind Turbine Testing Using a Battery Charging Configuration.” NMW. Yang, Bill, Phillip Sanger, and Patrick Gardner. “Teaching and Learning of Project Management for Engineering and Technology Capstone Research Projects.” ACP. Zhou, Zhaoxian. “LabVIEW-Based Laboratory for Electronics Engineering Technology Program.” SEE. Zhou, Zhaoxian. “Practice of Increasing Enrollment and Retention of Electronics Engineering Technology Program.” SEE.

Faculty Development Barak, Moshe. “Promoting Technological Literacy among Mathematics, Science, and Technology Teachers: A Graduate Studies Course.” ACP. Bowers, Sharon, and Edwin K. Brown. “Empowering Teachers through the Virginia 21st Century eTeacher Graduate Series.” SEE. Buchanan, Walter W. “Faculty Scholarship, Research and Development in Engineering Technology.” CIEC. Garrick, Robert et al. “Accelerating Untenured Faculty Scholarship.” CIEC. Genis, Vladimir, and Fredericka K. Reisman. “Preparing a Successful NSF Grant Proposal: A Case Study.” Journal of Engineering Technology 27, no. 1 (Spring 2010): 8-16. Head, Elsa, and Adam Carberry. “What Can Teachers Learn from Engineering Experts? Using a ThreePhase Model to Improve K-12 Teachers Knowledge of Engineering and Technology.” ACP.

Hoffman, Allen H. et al. “Combining Service Learning with the NSF Research Experiences for Teachers Program.” WIP. FIE. Hunter, Kenneth, Jessica Matson, Margaret Phelps, and Roy Loutzenheiser. “Professional Development for Science, Technology, and Mathematics Teachers.” ACP. Johnson, Daniel, and Brian Thorn. “Balancing the Demand for Teaching and Sponsored Research Activity.” ACP. Kimmel, Howard et al. “A Capstone Approach to Exploring Teacher Outcomes from Professional Development.” ACP. O‟Brien, Stephen. “Technological Literacy in a K-5 Teacher Preparation Program.” ACP. Ross, Julie, and Taryn Bayles. “Lessons Learned during Teacher Professional Development Pilot Program–Impact on Curriculum Teacher‟s Guide Development & Future Professional Development Institute.” WIP. FIE.

Industrial Bryan, Cory, Mitch Grenwalt, and Adam Stienecker. “Energy Consumption Reduction in Industrial Robots.” NC. Chen, Joseph C., and Julie Z. Zhang. “Case Study: Applying QFD in a Graduate Curriculum Design for an Industrial Engineering Technology Program.” The Technology Interface International Journal 11, no. 1 (Fall/Winter 2010): 66-70. http://www.tiij.org/issues/winter2010/files/TIIJ%20fallspring%202010-PDW2.pdf. Creese, Robert C. Geometric Programming for Design and Cost Optimization (with Illustrative Case Study Problems and Solutions). San Rafael, CA: Morgan & Claypool, 2010. Creese, Robert C., and M. Adithan. Strategic Case Analysis for Project Managers and Engineers. New Delhi: New Age, 2010. Creese, Robert C., and Yi Fang. “Time-Based Schedule Performance Index.” Cost Engineering–The AACE International Journal of Cost Estimation, Cost and Schedule Control, and Project Management 52, no. 3 (March 2010): 18-20. Creese, Robert, and Deepak Gupta. “Combined Individual-Team Based Project.” ACP. Heidari, Farzin. “Design and Implementation of Scoring Rubrics for the Industrial Technology Program.” GSW. Yildiz, Faruk. “Low-Power Energy Harvesting from Hydraulic Door Closer.” Journal of Engineering Technology 27, no. 1 (Spring 2010): 18-25. Yildiz, Faruk, and Mark Dearing. “Self-Powered Athletics Field Striping Machine.” GSW.

Industry/Government/Employers Agrawal, Ashok, and Amy Sonderman. “Collaborating with Local Industry for Pre-Employment Training.” CIEC. Alshubbok, Ali, Saeid Moslehpour, Eugenio Pellicer, and Joaquin Catala. “Implementation of Delphi Methodology for Designing Engineering Syllabus according to the Industry‟s Needs.” NE. Bakr, Mamdouh. “Multi-Dimentional [sic] Connectivity with Industry of a Mechanical Engineering Technology Program–Experience Gained and Lessons Learned.” ACP. Ball, Aaron, and George Ford. “A Case Study: An Energy Audit for a Small Municipality in North Carolina.” SEE. Ball, Aaron K., and William L. McDaniel. “Industry Partnerships at Western Carolina University: Live Projects That Work.” SEE. Benedict, Barry A. “Industry-University Consortia and Conflicts of Interest.” ICEE. Dave, Janek, and Janet Dong. “An Industry-University Collaboration Experience on a Senior Project.” ASME. Paper no. 37456. Foster, Phillip R. “Effective Continuous Quality Improvement through Structured Cooperation between the Industrial Advisory Board and Faculty.” GSW. Gore, David W., and Richard R. Redditt. “Industry and University Collaboration of Masters [sic] in Engineering Management Curriculum Design.” Journal of Management and Engineering Integration 2, no. 2 (Winter 2010): 54-61. Harding, Bruce A., and Paul B. McPherson. “Industrial Standardization and Higher Education: Current Supply vs. Industry Demand.” CIEC. Harding, Bruce, and Paul B. McPherson. “What Do Employers Want in Terms of Employee Knowledge of Technical Standards and the Process of Standardization?” ACP. Hudson, William B., and Craig O. Thompson. “Addressing Intellectual Property (IP) and Student Needs in Industry Collaborative Student Projects.” NMW. Midturi, S. “A Link between Industry and Engineering and Engineering Technology Institutions.” GSW. Miyazato, Shinichi. “Education by University-Industry Coordination with Joint Research Project.” ICEE. Mullet, Gary J. “The Verizon NextStep Program–A Fifteen-Year Partnership.” CIEC. Omar, Maher, Abdallah Shanableh, and Kaled Hamad. “Thoughts on the University-Industry Relations.” CIEC. Ramin Sadeghi, Ramin, Saeid Moslehpour, Haidar Almohri, and Yousef Karam. “Real Time Collaboration System (RTCS) Tools in E-Learning Portals.” CIEC. Raju, V. “Engineering Competencies and the Need for Education and Training in Industry.” CIEC.

Sergeyev, Aleksander, and Nasser Alaraje. “Partnership with Industry to Offer a Professional Certificate in Robotic Information.” ACP. Ślosarek, Jan, Blazej Sobota, and Ewa Mendec. “Collaboration between Universities and Industry Based on Experience of the Silesian University of Technology.” ICEE. Trucco, Martina Y., Lueny Morrell, and Richard J. Friedrich. “Open Innovation @ HP Labs: Weaving Together Minds, Ideas and Resources.” CIEC. Westheider, Virginia H., Patrick Brown, Janet Dong, and Jay Lee. “Bringing the University to the Community and the Community to the University via Collaboration with Business and Industry Partners.” CIEC. Zoghi, Ben, Dave Taylor, Peter Linke, and Ron Peddy. “Using RFID to Provide Higher Level of Safety for Fire Fighters.” CIEC.

Information Technology Burger, Carol J. “Information Technology Career Interest: Cross-Cultural Study of College Women in Australia, New Zealand, & the United States.” SEE. Jasani, Hetal, and Traian Marius Truta. “Development and Implementation of a Masters [sic] Program in Computer Information Technology.” ACP. Nankivell, Kim, Joy Colwell, and Jana Worthington. “Preparing the Information Technology Professionals of Tomorrow: What Information Technology Programs Can Do to Ensure Their Graduates Are Employable.” ACP. Reynolds, George. Ethics in Information Technology. 3rd ed. Toronto: Cengage, 2010. Trivedi, Bhushan H. “Impact of Effective Pedagogy on Information Technology Students with Weak Academic Backgrounds.” International Journal of Engineering Education 26, no. 3 (2010): 708-715.

Instructional Technology Aziz, E-S, S. K. Esche, and O. Chassapis. “Review of the State of the Art in Virtual Learning Environments Based on Multi-Player Computer Games.” Computers in Education Journal 20, no. 1 (January-March 2010): 21-35. Bhatnagar, K. (2010). “Modeling Instruction for the Net Generation: The Use of New Media to Frame Classroom Conversation in a Graduate Seminar Course: Possibilities And Predicaments.” Proceedings of the ATMAE 2010 Conference Proceedings, October 27-30, 2010, Panama City Beach, Florida: 159-165. http://atmae.org/conven/ATMAE2010ConfProc.pdf. Borges, Daniel Capelo, Herminio Borges Neto, Janete Barroso Batista, and Regina Santos Young. “Wiki: A Proposal for Collaborative Work.” FIE. Ciu, Suxia, Younhui Wang, Felecia M. Nave, and Kendall T. Harris. “Teach Computer Techniques through Multimedia.” NE.

Click, Steven M. “Using Camtasia Relay on a Tablet PC to Record Lectures in the Classroom: Experiences of a First-Time User.” SEE. Coller, B. D. “Lessons Learned from Teaching Dynamic Systems & Control with a Video Game.” Computers in Education Journal 20, no. 1 (January-March 2010): 3-12. Cooper, Karen N., Naira H. Campbell-Kyureghyan, and Carolyn M. Sommerich. “A Closer Look at a Tablet PC Program: The Faculty Perspective.” NC. Dell, Elizabeth. “Using Web-Based Resources in an Introduction to Materials Science Course to Develop Communication and Problem-Solving Skills.” StL. Dow, Douglas E. “Integrating Web-Based Learning Modules into a Traditional Course.” NE. Erdmans, Charlotte, and Bruce Harding. “Leveraging the Internet and Limited On-Campus Resources to Teach Information Literary Skills to Future Engineering Practitioners.” ACP. Estell, John K. “Connecting with Alumni: An Experiment in Social Networking Using Facebook Groups.” Computers in Education Journal 20, no. 1 (January-March 2010): 13-21. Garrick, Robert, and Marybeth Koon. “A Mixed-Method Comparison Evaluation on the Impact of Tablet PCs and Pen-Based Technology for a Pneumatics and Hydraulics Class.” StL. Gill, Andy. “Improving the Presentation of Technical Material in Video Talks Using Post Production.” MW. Harley, Gabriel et al. “Enhancing Student Classroom Engagement through Social Networking Technology.” ACP. Husky, Gilberto, Julieta Noguez, Luis Neri, and Victor Robledo-Rella. “Using Interactivity Video Games Factor to Define Role Playing Games as a Supporting Tool for Learning by Doing.” WIP. FIE. Johnson, Craig. “Effectiveness of Videos in Casting Education.” ACP. Johnson, Craig. “Use of Video in Casting Education.” WIP. Zone. Kozak, Michael. “In-Person versus Synchronous Remote Delivery of Mechanics Lectures.” ACP. Malik, Manish. “Supporting Exam Revision in Google Talk and Examopedia Wiki.” FIE. Meenaskshi, K., and V. Raju. “Use of Technology in Teaching English to Engineering Students–A Study of Engineering Problems in India.” CIEC. Miller, Scott, and Jeffrey Connor. “Student Use of Technology in a Large Lecture.” ACP. Nathan, Rungun. “Faculty‟s Use of Tablet-PC to Enhance Learning for Technology Students.” ACP. Nankivell, Kimberly James. “The Evolution of Virtual Reality Environments and Implementation of New Technologies: An Overview of the Current State of Research.” The Technology Interface International Journal 11, no. 1 (Fall/Winter 2010): 5-13. http://www.tiij.org/issues/winter2010/files/TIIJ%20fall-spring%202010-PDW2.pdf.

Rodrigues, Patricia Alves, Leônidas de Oliviera Brandāo, and Anarosa A. F. Brandāo. “Interactive Assignment: A Moodle Component to Enrich the Learning Process.” FIE. Samson, P. J. “Deliberate Engagement of Laptops in Large Lecture Classes to Improve Attentiveness and Engagement.” Computers in Education Journal 20, no. 2 (April-June 2010): 27-38. Spezialetti, Madalene. “The Video Scenario Approach for Developing Computational and Entrepreneurial Thinking Skills.” WIP. FIE. Whitman, L. E., M. Jorgensen, and B. Chaparro. “Virtual Factory Models: Do They Help Students Learn?” Computers in Education Journal 20, no. 1 (January-March 2010): 106-112.

International Adithan, M., and Robert Creese. “Globalization and Higher Education: A Case Study from India.” ACP. Arciero, Ariana, Benjamin Flores, and Helmut Knaust. “International Conference Participation for Undergraduate Scholars through the University of Texas System Louis Stokes Alliance for Minority Participation.” WIP. FIE. Bojar, Gabor. “Globalization from a Small Country Perspective.” ACP. Bolshakov, Alexander, Olga Dolinina, and Alexander Sytnik. “International Association of Information Technologies Education as Effective Form of Academic International Cooperation.” ICEE. Chinn, Gary, Veena Raman, Steve A, Walton, and Thomas Litzinger. “Using Technology-Mediate Collaboration in the Teaching of Ethics and Globalization.” ACP. Cottrell, David. “Integrating Cultural Development into a Multidisciplinary Seminar Course: Broadening the Student Horizon to Enhance Appreciation for Contemporary Global Issues.” ACP. Das, Gautham, and Rishi Cariappa. “The Construction of the Outer Ring Road in Bangalore.” NE. Dave, Janak, and Janet Dong. “Global Experiential Learning for Engineering Technology Students.” ACP. Esparragoza, Ivan, Ricardo Mejia, and Carlos Rodriguez. “Collaborative Tools for Global Design Project Management: Case Study of an Academic Experience.” ACP. Fidan, Ismail. “Forming Collaborative Links between Turkey and the United States: International Workshop on Rapid Technologies.” ACP. Foroudastan, Saeed, and Sandi Hyde. “The Value of Exchange: The Benefits of Intercultural Engineering Study: A Design Team Experience.” ACP. Hopcraft, Francis J. “The Integration of Co-op Program into International NGO Work.” NE. Jones, Russel. “Transforming Middle East Economies through Education, Research, and Innovation.” ACP.

Kanematsu, Hideyuki et al. “International Environmental Problem Discussion by Using Moodle.” ICEE. Kulkarmi, Alka, M. S. Moodithaya, and Narasimba H. Ayachit. “Assessing Indian Autonomous Institutions Using AHP Approach–A Case Study.” FIE. Lou, Shi-Jer et al. “A Study of Project-Based STEM Learning in Taiwan.” ACP. Ofusu, Willie, Francois Sekyere, and James Oppong. “Adapting a Communication System to the Environment of an African Nation.” ACP. Olaleye, James, Emmanuel Abiodun, Joseph Olusina, and Francis Derby. “A Comparative Study of LandSurveying Education at the University of Lagos and the Pennsylvania State University.” ACP. Stepler, Renee, Steve Ganguilo, Khanjan Mehta, and Sven Bilen. “Applying Systems Thinking for Realizing the Mission of Technology-Based Social Ventures in Africa.” ACP. Sun, Wangping. “An Overview of Engineering Education in the US under a Globalization Environment.” Zone. Triki, N., S. Gupta, S, Wamuziri, and T Rafik. “An Investigation into the Role of Engineering and Technical Education in Providing the Skills Needed by Libyan Manufacturing Industry.” International Journal of Engineering Education 26, no. 1 (2010): 195-204. Yildiz, Karuk, Recayi “Reg” Pecen, and Soner Tarim. “Young Minds Meet for Sustainable Future.” ACP. Yu, Jui-Chen, Hsish-Hua Yang, Lung-Hsing Kuo, and Hung-Jen Yang. “In-Service Professional Field Expansion Model of Vocational Senior-High Technology Teachers in Taiwan.” ACP.

Laboratories Attarzadeh, Farrokh et al. “Advances in CLABS Methodology for Engineering Technology Laboratories.” GSW. Chacon, Sergio, Driss Benhaddou, and Mequanint Moges. “The UH-ATT Lab: State of the Art Training Center for Communication.” GSW. Chen, Xuemin, Yongpeng Zhang, Lawrence Kehinde, and David Olowokere. “Developing Virtual and Remote Undergraduate Laboratory for Engineering Technology.” ACP. Chiou, Richard, and William Danley. “Experience of Implementation of NSF Web-Based Technology Projects in Curriculum, Course, and Laboratory Development for First Time New ABET Accreditation.” ACP. Chiou, Richard Y., and Michael Mauk. “Six Sigma-Based Quality Control Laboratory for Engineering and Technology Education Innovation.” International Journal of Engineering Research & Innovation 2, no. 2 (Fall/Winter 2010): 63-71. Cochrane, Phillip, Barbara Eversole, and Carroll Graham. “Improving Laboratory Performance.” CIEC.

Cote, Mark. “Replacing a Power Plant Control Room Simulation Laboratory for an Engineering Technology Program.” ASME. Paper no. 37968. Cox, Daniel, Zeynic Meric, Ranier Bartz, and Christof Ctistis. “Complementary Simulation and Remote Laboratory Experiences to Hands-On Control Systems Curriculum.” ICEE. Dini, Said, R. B. Mindek, Jr., Daniel Goodwin, and Adam Desmarais. “Laboratory Experiences in Alternative Energy Systems and Their Integration in a Green Curriculum.” ASME. Paper no. 38425. Domermuth, David. “Economical Classroom Laboratories for Material Science.” SEE. Egbert, Robert. “A Laboratory Format for Improved Student Participation.” MW. Goharzadeh, Afshin et al. “Teaching the Concept of Bernoulli Equation Using Particle Image Velocimetry.” ASME. Paper no. 40312. Jasani, Hetal. “Vendor Neutral Hands-On Labs Using Open-Source Products for Wireless Networks Courses.” FIE. Keska, J. K. Physical Experimentation, Instrumentation and Measurements. Laboratory Manual Vol. I. Raleigh, NC: Lulu Press, 2010. Keska, J. K. Physical Experimentation, Instrumentation and Measurements. Laboratory ManualVol. II. Raleigh, NC: Lulu Press, 2010. Keska, J. K. Instrumentation and Measurements. Experimentation Manual. Raleigh, NC: Lulu Press, 2010. Krupczak, John, and Kate Disney. “Portable Laboratories for General Education Engineering Courses.” ACP. Marshall, John. “A Laboratory/Design-Based, Problem Solving Capstone Helps Engineering Technologists Hit the Job Market.” ACP. Morton, William, and James Uhomoibhi. “An E-Laboratory for Enhanced Science, Technology and Engineering Education.” ICEE. Ruhala, Richard. “Four Free-Vibration Laboratory Experiments Using Two Lumped Mass Apparatuses with Research Caliber Accelerometers and Analyzer.” ACP. Seeling, Patrick. “Portable Student Labs Implementation.” WIP. FIE. Ward, A. S., M. N. Gooseff, R. Y. Toto, and S. E. Zappe. “Higher-Order Learning through Virtual Laboratories in Fluid Mechanics: Lessons Learned.” MIDAT2. Yildiz, Faruk. “A New Approach Using Electronics Laboratory Work Efficiently and Safely.” ACP. Zhang, Yongpeng, Cajetan Akujuobi, Yonghui Wang, and Suxia Cui. “Engineering Technology Laboratory Enhancement with LabVIEW.” ACP.

Liberal Studies Bertha, Carlos. “How to Teach an Engineering Ethics Course Using Cases.” ACP. Billis, Steven. “Technology and Global Issues: A Non-Traditional Course in the Engineering Curriculum.” WIP. FIE. Bowler, Michael et al. “Testing for Ethical Sensitivity to Responsible Conduct of Research among MultiNational STEM Researchers.” ACP. Campbell, Ryan C., and Denise Wilson. “Ethics in Humanitarian Engineering: A Means of Assessment.” WIP. FIE. Castro-Sitiriche, Marcel J., Christopher Papadopoulos, and Héctor J. Huyke. “Interdisciplinary Integration in Philosophy of Technology.” WIP. FIE. Catalano, George, and Caroline Baillie. “Engineering Decisions in the Context of Sustainability: Complex Systems.” ACP. Colwell, Joy. “Soft Skills for the New Economy: Their Place in Graduate Education in Engineering and Engineering Technology.” ACP. Culver, Steven, Vinod Lohani, and Ishwar Puri. “Engagement with Ethics in a Large Engineering Program: A Status Report.” ACP. Dyrud, Marilyn A. “Ethics‟ Orphan: Unintended Consequences.” ACP. Dyrud, Marilyn A. “Problem Solving in Engineering and Ethics: Points of Intersection.” CIEC. Dyrud, Marilyn A. “Remembering the Past to Inform the Future: Engineering and the Holocaust.” Zone. Freyne, Seamus, J. Patrick Abulencia, and Powell Draper. “First-Year Engineering Students‟ Perceptions of Contemporary Ethical Issues.” ACP. Gasparski, Wojciech. “Ethical Component of Engineering Education.” ICEE. Glynn, Edward, Frank Falcone, and Mark Doorley. “Implementing Ethics across Engineering Curricula.” ACP. Gunn, Craig. “Novel Writing in a College of Engineering.” WIP. NC. Gunn, Craig. “Promoting an Interest in Engineering through Art.” ACP. Halada, Gary P. “Teaching by Disaster: The Ethical, Legal and Societal Implications of Engineering Disaster.” MIDAT1. Hoshino, Yuko, and L. Wayne Sanders. “Cultivating Cultural Competencies through Various Classes.” ICEE. Ilic, Vojislav. “Humanities in Engineering and Engineering in Humanities.” ICEE.

Khan, Ahmed, and Abdul Qudeer. “Incorporating Social and Ethical Implications of Nanotechnology in Science, Technology, and Society (STS) Courses.” ACP. Layton, David. “Using the College Science Fiction Class to Teach Technology and Ethics: Themes and Methods.” ACP. Lin, Chun-Hsu, Shih-Ming Huang, Pei-Shan Wu, and Chiung-Hui Chiu. “Primary School Students‟ Decision-Making Argumentation in Cyber-Ethics Dilemmas.” FIE. Loendorf, William. “The Social, Economic, and Political Impact of Technology: An Historical Perspective.” ACP. Loendorf, William, and Terence Geyer. “Promoting Technological Literacy by Utilizing Pictures and Recreated Artifacts.” ACP. Magana, Alejandra J., and Donna Riley. “First-Year Students‟ Perceptions of the Societal and Ethical Implications of Nanotechnology.” ACP. Martin, Mike, and Roland Schinzinger. Introduction to Engineering Ethics. 2nd ed. New York: McGrawHill, 2010. May, Jill, Daniel Gandara, and Margaret Huyck. “The Creation and Validation of Measures for Ethics in Cross-Disciplinary Student Teams.” ACP. May, Jill et al. “Can One Measure of Ethical Competence Be Useful in Varied Undergraduate, Multidisciplinary Settings?” WIP. FIE. McEwan, Tom, and Sandra Cairncross. “Hallelujah! Using Topical Examples to Illustrate Ethical and Business Issues for Foreigners.” FIE. Monaghan, Gloria A. “Across the Universe: Cyborgs and Students in the Garden.” NE. Monaghan, Gloria A. “Creativity and Engineering: Constructing Poems.” NE. Nabhani, Nader. “Perceptions and Attitudes of Students on Soft Skills in Petroleum Engineering.” ICEE. Nathans-Kelly, Traci et al. “In-Situ Ethics: The Ethical Sensibility That Engineers Bring to Their Work.” ACP. Plaza, Immaculada et al. “Ethics in Engineering: A Simple Case of Study Using Statements.” WIP. FIE. Prusak, Zbigniew. “Use of Engineering Standards for Introduction to Global and Local Aspects of Engineering.” ICEE. Pumwa, John. “Engineering Ethics: A Necessary Attribute for Engineers in Papua New Guinea.” ASME. Paper no. 37023. St. Germain, Anthony Joseph. “Henry Petroski: Bridging the Two Cultures.” NE. Tuck, Joanne. “Designers of Death: Nazi Engineers during the Holocaust.” NE.

Walk, Steven. “Increasing Technological Literacy through Improved Understanding of Technology Emergence and Diffusion.” ACP. Walczak, Kelley et al. “Institutional Obstacles to Integrating Ethics into the Curriculum and Strategies for Overcoming Them.” ACP. Wilson, Sara E. “Responsible Conduct of Research in Engineering: Addressing the America COMPETES Act.” MW.

Manufacturing Arter, Roland K. “Exploring Attitudes towards Machine Designing.” NC. Baxter, Doug. “Computer Aided Manufacturing with Computer Aided Design: Some Lessons.” EDGD. Chattopadhyay, Somnath. “Selection of Material, Shape, and Manufacturing Process for a Connecting Rod.” ACP. Chen, Joseph C., and E. Daniel Kirby. “Comparing Classical DOE and Taguchi Parameter Design in a Learning Environment.” Journal of Engineering Technology 27, no. 2 (Fall 2010): 42-52. Chung, Guanghau, and William Peterson. “Design for Assembly in a Manufacturing Engineering Technology Program: Experience and Success.” ACP. Feola, Sandy. “CareerME: Encouraging an Advanced Manufacturing Worker Pipeline.” ACP. Ferguson, Luke. “Properties of Fibers and Fabrics.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/matedmodules/. Foust, Henry, and George Watt. “Implementing Electrical Principles into a Manufacturing Engineering Technology Curriculum.” GSW. Foust, Henry, and George Watt. “Hydroelectric Plant Design as a Synthesis for an Engineering Technology Curriculum.” International Journal of Modern Engineering 11, no. 1 (Fall/Winter 2010): 66-73. Genis, Vladimir et al. “Development of the Laboratory-Based Course in Lean Six Sigma Nanomanufacturing.” ACP. Genis, Vladimir et al. “Lean Six Sigma Nanomanufacturing Course for Undergraduate Engineering Technology and Engineering Programs.” Journal of Engineering Technology 27, no. 2 (Fall 2010): 18-29. Guiterrez, Jose, John Anderson, and David Culler. “Development of a Generic Communication Service between Programmable Logic Controllers ad Personal Computers, Using a Microsoft Robotics Developer Studio for Data Collection in Automated and Semi-Automated Manufacturing Processes.” ACP. Jaksic, Nebojsa. “Teaching PLCs Using the Kolb Learning Cycle.” ACP.

Johnson, Michael, Ram Prasad Diwakakaran, and Justin Zsiros. “Conveying the Importance of Manufacturing Process Design Using Simulation Results and Empirical Data.” ACP. Leduc, Alan, Gary Hadley, and Mark Ratzlaff. “Immersive Learning Using Lean Six Sigma Methodology in the Manufacturing Engineering Technology Capstone Course.” ACP. Loendorf, William. “Engineering Management Actions Taken and Changes Made by Manufacturers to Become More Competitive.” ACP. Loendorf, William. “Engineering Management Improvement Programs Implemented by Manufacturers to Become More Competitive.” ACP. Loendorf, William. “Engineering Management Performance Monitoring Methods Utilized by Manufacturers to Become More Competitive.” ACP. Merten, Elizabeth. “Hardness Testing of Materials.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/matedmodules/. Merten, Elizabeth and Fumio S. Ohuchi. “Viewing Microstructures of Materials Using the Optical Microscope.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/mated-modules/. Mohammed, Jaby, Ramesh Narang, and Jihad Albayyari. “Developing a New Manufacturing Engineering Technology Curriculum.” ACP. Mott, Robert L. Statics and Strengths of Materials. Upper Saddle River, NJ: Prentice Hall, 2010. Nakayama, Shoji, and Ugo Mgbike. “Risk Assessment: A Proactive Approach to Minimizing Waste.” CIEC. Nutter, Paul. “Computer Simulation for Manufacturing Partnerships.” ACP. Olumolade, Molu et al. “Design Prototyping for Manufacturability.” International Journal of Modern Engineering 10, no. 2 (Spring/Summer 2010): 5-9. Palmer, Mark, and Thomas Stoebe. “Introduction to Hardness.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/ mated-modules/. Peter, Geoffrey. “Hands-On Graduate Courses in Lean Manufacturing (LM) Emphasizing Green and Total Productive Maintenance (TPM).” ASME. Paper no. 37921. Peterson, Harry C. “Ethical and Honesty Issues of Web-Based On-Line Courses Compared with Traditional Classroom Courses.” NMW. Peterson, Harry C. “Insights Learned from Conversion of Web-Based On-Line Courses Back to Traditional Classroom Presentations.” NMW. Pomeranz, Gilah, Shep Anderson, Robert Mott, and Steve Wendel. “Don‟t Reinvent the Wheel: METEC Meets Many Needs for New Engineering Technology Educators.” ACP.

Roc, Eric, Ernie Helms, Bob Lachford, and Rick Johnson. “Creation of a Multi-Skill Manufacturing Apprenticeship Program with Articulated Pathways into Engineering Technology.” ACP. Salehpour, Amir, and Sam Antoline. “Rapid Prototyping as an Instruction Tool to Enhance Learning.” ACP. Sirinterlikci, Arif, and John Monroe. “Teaching Reverse Engineering for Non-Industrial Applications.” ACP. Stuart, Joe. “Composite Materials Layup Lab.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/mated-modules/ Tsang, Tzu-Ling (Bill), Richard Chou, and Yongjin Kwon. “Engineering Educators: Internet Based Manufacturing Enhancement.” GSW. Weeks, Margaret and Thomas Stoebe. “The Liquid Crystal Display.” Lynnwood, WA: National Resource Center for Materials Technology Education, 2010. http://www.materialseducation.org/educators/mated-modules. Wells, David. “Challenges and Responses over a Quarter-Century of Manufacturing Education.” ACP. Wells, David. “A Strategy for Incorporating Advanced Manufacturing Technologies into Undergraduate Education.” ACP. White, William L. “Integrating Written and Oral Communications into a Manufacturing Processes Class.” NC. Zhou, Ziliang, and Anthony Donaldson. “Project-Based Learning in Manufacturing Process.” WIP. FIE.

Mechanical Adams, Patrick L., and Jerry K. Keska. “An Experimental Approach Towards the Measurement of the Two-Phase Flow Pattern Phenomenon.” GSW. Altan, Taylan, John T. Berry, and John E. Wyatt. “Whatever Happened to Product Realization? Will Technology Programs Succeed Where Engineering Programs Have Failed?” SEE. Alvarado, Jorge. “Development of a Thermal Systems Course for a Power Engineering Technology Program.” ACP. Artigue, Aaron, Samuel Schlehuber, Jeremy Sommers, and Jerry K. Keska, “Open-Ended Project as a Learning Tool in an Undergraduate Mechanical Engineering Program.” GSW. Atiqullah, Mir M., and Norman Russell. “Design, Building, and Teaching with a Hydrostatic and Buoyancy Apparatus.” MIDAT1. Choudhury, Ifte. “Effect of Absenteeism on Student Performance in a Mechanical and Electrical Construction Course.” GSW. Clapp, William. “Weber Hovercraft Autonomous Target Vehicle.” CIEC.

Cook, Kevin et al. “Implementing a Formal Collaborative Mechanical Engineering Technology Internship Program with Campus Research Activities.” ACP. Dartnell, W. John, and John A. Reizes. “Developing Innovative Teaching Materials That Use Molecular Simulations in Engineering Thermodynamics.” ASME. Paper no. 40964. Denton, Nancy, Marc Williams, and Joseph Kmec. “Mass Unbalance in an MET Course.” ACP. Durfee, Jason, and Hani Saad. “Using a Living-Building Laboratory (Building as a Laboratory) as a Thermodynamics Project in the Engineering Technology Curriculum.” ACP. Faulkenberry, Luces, and Wajiha Shireen. “Undergraduate ad Graduate Research Projects in Plug-In Hybrid Electric Vehicles (PHEVS) Supported by Centerpoint Energy.” ACP. Field, Brandon. “Guided Inquiry Learning in a Thermodynamics Class.” ASME. Paper no. 39226. Fleishman, Steven, and Eric Leonhardt. “An Alternative Ride–Undergraduate Students and Faculty at Western Washington University Design a Hybrid Electric Bus.” ACP. Ford, George, William McDaniel, and Paul Yanik. “An Introduction and Literature Review of Fuzzy Logic Applications for Robot Motion Planning.” SEE. Fuehne, Joseph. “Integrating Mechatronics into an Engineering Technology Curriculum.” ASME. Paper no. 38743. Fuehne, Joseph. “Virtual Lab Activities for a Distance Course in Fluid Power.” ASME. Paper no. 39384. Hall, Simin, Catherine T. Amelink, Sam Conn, and Eugene F. Brown. “Online Course Design Informed by Students‟ Epistemic Beliefs: A Case Study of a Thermodynamics Course.” ASME. Paper no. 37228. Hincapie, Juan Richard Jones, and Jerry K. Keska, “Reduction of Frequency Fluctuation Deviation of Void Fraction in Water-Air Heterogeneous Mixture Flow.” GSW. Hincapie, Juan, Richard Jones, and Jerry K. Keska, “Validation of Experimental Data Using Concomitant Measurement Systems.” GSW. Hossain, N. M., and Jason Durfee. “Testing Several Composite Materials in a Material Science Course under the Engineering Technology Curriculum.” ACP. Johnson, Michael, and Udaya Bhanu Prakesh Sunku. “A Platform Independent Methodology for Teaching Students to Leverage the Power of Parametric Design Tools.” ACP. Keska, Jerry K., “Instrumentation Emphasis in Undergraduate Mechanical Engineering Programs.” ACP. Keska, Jerry K. “Physical Experimentation Laboratory in a Mechanical Engineering Program with a Teaching Segment on Data Validation.” GSW. Keska, Jerry K., Juan Hincapie, and Richard Jones. “The Effects of Flow Pattern Changes Due to Variable Viscosities of a Heterogeneous Gas-Liquid Mixture in a Vertical Channel.” International Journal of Experimental Thermal and Fluid Science, ETF_7413, 2010.

Kim, Jay, Teik C. Lim, Randall Allemang, and Robert Rost. “Engineering Education through DegreeLong Project, A New Project Based Learning Approach.” ASME. Paper no. 40514. Kitto, Kathleen L. “Understanding the Effectiveness of Cognitive and Social Constructivism, Elements of Inductive Practice and Student Learning Styles on Selected Learning Outcomes in Materials Engineering.” FIE. Kumpaty, Subha. “Deliberate Service Learning in the Energy Courses.” ASME. Paper no. 40583. Le, Xiaobin, Ali Moozed, Anthony Duva, and Richard Roberts. “Application of the SolidWorks in Teaching Mechanical Design for the Digital Generation.” NE. Liang, Wilson (Zhongming). “CAD Models of Movable Clamps in Fixture Design.” CIEC. Lin, Cheng. “Design of a Pneumatic Valve for Automatic Seat-Lifting or Door-Opening Mechanisms.” ACP. Litwhiler, Dale, Thomas Gavigan, and Brittany Farrell. “Energy-Harvesting Investigations by Undergraduate Engineering Technology Students.” ACP. Malali, Praveen, Pooja Bais, Robert Choate, and Sushil Chaturvedi. “Uncertainty Analysis and Instrument Selection Using a Web-Based Virtual Experiment.” ACP. McDonald, David. “Engineering and Technology Education for Electric Vehicle Development.” ACP. McHugh, Ryne. “Virtual Prototyping of Mechatronics for 21st Century Engineering and Technology.” IL/IN. Molen, G. Marshall. “Benefit of Student Participation in Advanced Vehicle Technology Competitions.” ACP. Mondragon-Torres, Antonio F. “The Millennium Generation: Are They Ready for the Ultra-Low Power Challenge?” NE. Moozed, Ali R., Richard Roberts, Xiaobin Le, and Anthony Duva. “Teaching Finite Element Analysis in Undergraduate Technology Curriculum.” NE. Nagchaudhuri, Abhijit, Madhumi Mitra, Xavier Henry, and Dayton Green. “Experimental Prototype of a Remote-Controlled Platform to Monitor Water Quality Data.” ACP. Nathan, Rungun. “Using Fill-In Worksheets in a Mechanics Class.” ACP. Njock-Libii, Josue. “Using Microsoft Windows to Compare the Energy Dissipated by Old and New Tennis Balls.” ACP. Pandian, Shunmugham R. “Intelligent Mechatronic Technologies for Green Energy System.” GSW. Passmore, Lucas et al. “Sources of Students‟ Difficulties with Couples and Moments in Statics.” ACP. Rajaravivarma, Rothika. “Embedding LEGO Mindstorms in the Electromechanical Engineering Technology Curriculum.” NE.

Recktenwald, Gerald, Robert Edwards, Jenna Faulkner, and Douglas Howe. “An Inquiry-Based Exercise Involving a Tank of Water with a Hole in Its Side.” ACP. Rodgers, Peter et al. “Teaching of Multimode Heat Transfer through Laboratory Experiments.” ASME. Paper no. 40447. Rossmana, Jenn Stroud, and Karina Aguilera Skvirsky. “You Don‟t Need a Weatherman to Know Which Way the Wind Blows: The Art & Science of Flow Visualization.” FIE. Santiago, Daniel et al. “Performance Optimization of Direct Methanol-Fuel Cell.” ACP. Sridhana, B. “Course-Related Activities for Mechanical Vibration in the Absence of a Formal Laboratory.” ACP. Wang. Jhywen, and Sanjay Tiwari. “A Low-Cost Instrument for Precision Non-Contact Thickness Measurement.” Journal of Engineering Technology 27, no. 1 (Spring 2010): 28-34. Yang, Tuzhao, and Carl Lundgren. “Wood Chip Compost Heater.” StL. Yilmiz, Emin. “Instrumentation for Performance Measurements of Heat Pumps with Commercial Desuperheaters.” ASME. Paper no. 39980. Younis, Nashwan. “Visualized Photostress Images for Stress Concentration Instruction.” ACP. Yu, Ying, and Wang, Yu. “Construction and Application of Mechatronics Automation Laboratory at CDHAW of Tongji University.” ASME. Paper no. 37811.

Nuclear Ciu, Suxia, John Fuller, Pamela Holland-Obioman, and Warsame A. Ali. “Educate New Generation on Nuclear Technology.” NE. Richards, Taylor, and Sang-Hoon Lee. “Development of Best Practices for Nuclear Power Plants.” GSW.

Teaching Methodology Adams, Robin S., Natalie Beltz Llewellyn Mann, and Denise Wilson. “Exploring Student Differences in Formulating Cross-Disciplinary Sustainability Problems.” International Journal of Engineering Education 26, no. 2 (2010): 324-338. Chen, Rongrong, David Goodman, Afshin Izadian, and Elaine Cooney. “Teaching Renewable Energy through Hands-On Project-Based Learning for Engineering Technology Students.” ACP. Couch, Alva L. “Re-Engineering the Value Proposition for Class Attendance in the Digital Age.” NE.

Daniels, Laws, and Åsa Cajander. “Experiences from Using Constructive Controversy in an Open Ended Group Project.” FIE. Darwish, M. Mukaddes, and Sharath Neelakanta. “Integrating LITEE Case Studies in Construction Engineering and Engineering Technology Education.” GSW. Demetry, Chrysanthe. “An Innovation Merging „Classroom Flip‟ and Team-Based Learning.” WIP. FIE. Dong, Janet, and Janak Dave. “Experiential Learning for Engineering Technology Students in 21st Century.” ASME. Paper no. 37457. Dohle, Richard, and Richrd Devon. “Teaching Process for Technological Literary: The Case of Nanotechnology and Global Open Source Pedagogy.” ACP. Fleischman, Steven. “Western Washington University‟s Hybrid Bus–A Multidisciplinary Approach to Project-Based Education.” ACP. Fuehne, Joseph, David Webb, and Martin Stockmann. “Developing a System Approach for the Engineering Technology Classroom.” ASME. Paper no. 39123. Gu, Y. T., and A. Tan. “Visualization–A Powerful Tool for Effective Teaching of Dynamics.” ICEE. Hahn, Laura. “Using Participatory Action Research to Investigate Student Learning in Engineers without Borders.” WIP. FIE. Hamlin, Brett, Jonathan Riehl, AJ Hamlin, and Amy Monte. “What Are You Thinking? Over Confidence in First Year Students.” WIP. FIE. Hoffman, Allen H. “Encouraging Innovation by Having Students Develop Their Own Course Design Projects.” WIP. FIE. Homolka, Robert, and Greg Stephens. “A Triple Play: Mathematics, Baseball, and Storytelling.” ACP. Hundley, Stephen et al. “Great Environments for Student Success.” ACP. Islam, M. Nazrul. “Student Involvement in the Class.” MIDAT1. Kelley, David, and Mary Sadowski. “Peer Evaluation with a Team Design Project.” EDGD. Kim, Kahyun “Sophie,” and Lisa D. McNair. “Self-Managed Teaming and Team Effectiveness in Interdisciplinary Capstone Design.” FIE. Krupczak, John. “Using Functional Analysis as a Framework for Understanding Technology.” ACP. Laws, Elizabeth M. “A Method of Setting Examination Papers and Generating the Solutions.” ICEE. Laws, Elizabeth M. “Personalising the Examination Paper by Harnessing Energy.” ICEE. Leonard, William Robert Merrill, and Elizabeth Bell. “An Innovative Method Providing an Alternative to Capstone Courses Using Experiential Learning.” ACP.

Lewelling, Kevin R. “Using In-Class Teamwork Learning Modules in Digital Systems to Improve Conceptual Understanding.” MW. Mallory, James, Vicki Robinson, and Gary Long. “Using Second Life® to Enhance Student Learning of Technical Concepts.” StL. Marshall, John, and William Marshall. “Improving Engineering Education Pedagogy via Differentiated Instruction.” ACP. Matusovich, Holly, Michele Cooper, and Katherine Winters. “Understanding the Role of Graduate Teaching Assistants in Contributing to Student Motivation.” WIP. FIE. Muller, Orna, and Bruria Haberman. “A Non-Linear Approach to Solving Linear Algorithmic Problems.” FIE. Nathan, Rungun. “Fill-In Worksheets: A Tool to Increase Student Engagement.” ACP. O‟Connell, Robert M., Gavin Duffy, Ted Burke, and David Dorran. “Practical Aspects of Teaching via the Group-Based Learning Environment.” MW. Osakue, Edward E., and Graham Thomas. “Using Project Assignment to Improve Students‟ Knowledge and Skills.” CIEC. Pereira, Anna, and Michele Miller. “A Hands-On Ability Intervention.” WIP. FIE. Reid, Kenneth J., and Daniel Ferguson. “Measuring and Enhancing the Entrepreneurial Mindset of Freshman Engineering Students.” WIP. FIE. Robertson, John. “The Case for Technology Case Studies.” ACP. Rockland, Ronald et al. “Technology and Learning Objects in the Engineering Technology Classroom.” ACP. Rutkowski, Jerzy. “Application of Bloom‟s Taxonomy for Increasing Teaching Efficiency–Case Study.” ICEE. Samples, Jerry. “Leadership 107: Student Centeredness–A Balance.” ACP. Savage, Nancy, Samuel Daniels, and Michael Collura. “Inverting the Lecture Paradigm for a Multidisciplinary Course.” NE. Scalza, Alfred A. “How Students Learn: A Study in the Field of Individual Behavior.” MIDAT2. Shih, HuiRu et al. “Integrating Self-Regulated Learning Instruction in a Digital Logic Course.” ACP. Shull, Peter A., and Jessica M. Crandall. “Working Smart Is Not Enough!” MIDAT2. Snead, Charles V., and Jane LeClair. “Innovations to Degree Completion Strategies for Adult Learners.” StL.

Tsai, Hsi-Hsun. “Constructing the Norm of the Problem-Solving Abilities for Non-Traditional and Advanced Placement Students.” ACP. Vannozzi, Richard. “Experiential Learning Theory and the Teaching of Software Intensive Courses.” NE. Walk, Steven, and Roland Lawrence. “Development of an Intelligent Remedial Tutorial Learning System for Non-Traditional and Advanced Placement Students.” ACP. Yang, Eunice E., and Beverly W. Withiam. “Efficient Statics Lecture through the Use of Worksheets.” MIDAT1. Yip-Hoi, Derek, and Jeff Newcomer. “Using LEGOs to Teach Product Design and Team-Based CAD Modeling.” ASME. Paper no. 37769. Zhan, Wei, and Jay B. Porter “Using Problem-Based Learning to Teach Six Sigma Principles.” International Journal of Engineering Education 26, no. 3 (2010): 655-666.

Tech Prep/STEM Asiabanpour, Basham et al. “Bridging Engineering & Art: An Outreach Approach for Middle and High School Students.” American Journal of Engineering Education 1, no. 1 (2010). http://rpd.engineering.txstate.edu/AJEE.html Bachnak, Rafic, Rothita Goonatilake, Eduardo Chappa, and Young-Man Kim. “Programs for Recruitment and Retention in STEM Majors.” WIP. FIE. Bhatnagar, Kaninika, and Mary L. Brake. “Gender Differences in Technology Perceptions of High School Students and Their Intent to Choose Technology College Majors.” Journal of Engineering Technology 27, no. 2 (Fall 2010): 8-16. Brumfield, Jonathan et al. “Techfacturing: A Summer Day Camp Designed to Promote STEM Interest in Middle School Students through Exposure to Local Manufacturing Facilities.” SEE. Burghardt, M. David, and Michael Hacker. “A Study of Math Infusion in Middle School Engineering/Technology Education Classes.” ACP. Burghardt, M. David, Michael Hacker, Marc Devries, and Ammeret Rossouw. “Towards Developing an Ontology for K-12 Engineering Technology Education.” ACP. Castillo, Mauricio. “Technological Literacy: Designing and Testing an Instrument to Measure EighthGrade Achievement in the Technology Education.”ACP. Cecere, Joseph J., and Sofia Vidalis. “PENN State and Secondary Education: „A Winning Partnership.‟” CIEC. Chu, Marcos. “Developing K-12 Pre-Engineering Curriculum through Interrelationship between Higher Learning Organizations, Industry, After-School Robotics Competition, and Teacher Professional Organizations.” SEE.

Clark, Aaron C., and Alice Y. Scales. “The Role of Engineering Design Graphics in K-12 Outreach.” EDGD. Clemente, Mark A. “The Use of Modeling and Simulation as an Instructional Strategy in High School Math and Science Classes.” SEE. do Nascimento, Mariana R, Andréa P. Mendonça, Donald D. S. Guerrero, and Jorge C. A. De Figueirdo. “Teaching Programming for High School Students: A Distance Education Experience.” FIE. Donham, Brent L., and Matthew Elam. “Promoting Interest in Engineering in Rural School Districts through Summer Camps.” GSW. Doppalapudi, Harinath. “Summer Learning Camps on Robotics for Middle and High School Students.” GSW. Edwards, Robert, Kathryn Holliday-Darr, and Melanie Ford. “Undergraduate Involvement in Developing K-12 Hands-On Activities.” ACP. Felix, Allison L., Joel Z. Bandstra, and William H. J. Strosnider. “Design-Based Science for STEM Student Recruitment and Teacher Professional Development.” MIDAT1. Freudenthal, Eric, Alexandria Ogrey, and Rebecca Q. Gonzalez. “Eliciting Integrated Understandings of High School STEM Curricula through Programming.” WIP. FIE. Fuehne, Joseph, Julie Phillips, and Anji McKinney. “The Boiler Tech Challenge: A Fun Competition and Recruiting Tool for Engineering Technology Programs.” ASME. Paper no. 38967. Gilbert, Richard, Marilyn Barger, and Andrew Hoff. “STEM at Work.” ACP. Goff, Richard, Kyle Kelley, and Janis Terpenny. “Reflections on Mentoring FIRST LEGOS® League.” SEE. Gunn, Craig. “Grandparents University–Providing the Spark to Elementary Students.” WIP. NC. Hall, David, Michael Swanborn, and Heath Tims. “2D Trusses as a Mechanism for Teaching K12 Fundamental STEM Topics.” WIP. FIE. Hosokawa, Haruna, and Judy Robinson. “Alpha Robotics: A Multi-Disciplinary Approach to Teaching Engineering Concepts to K-2 Students.” NE. Jackson, Michael, Santosh Kucinec, and Elaine Lewis. “Solar Energy as a Forum to Introduce Microelectronic and Nanofabrication Basics to the K-12 Community.” StL. Jackson, Michael et al. “Excelsior Scholars Summer Program: Introducing K-12 Students to Microelectronic and Nanofabrication through Photovoltaics.” FIE. Jaksic, Nebojsa et al. “Maturing of a Multidisciplinary Cohort of STEM Scholars: Year Three.” Zone. King, Paul C., and Gerardo M. Shields. “Citypolytechnical High School: An Interdisciplinary Approach to Architectural and Civil Engineering Technology Studies.” NE.

Kowalski, Joan, and Tracie L. Brockhoff. “The FIRSTE Decade of the New Millennium.” ACP. Lawanto, Oenardi. “Understanding the Correlation between Goal Orientation and Self-Efficacy for Learning and Performance in an Engineering Design Activity in Grades 9-12.” Zone. Macho, Steve. “A Functional K-12 Conceptual Framework for Teaching Technological Literacy.” ACP. Mano, Chad, Vicki Allan, and Donald Cooley. “Effective In-Class Activities for Middle School Outreach Programs.” FIE. Massa, Nicholas, Michele Dischino, Judith Donnelly, and Fenna Hanes. “Problem-Based Learning in Sustainable Technologies: Increasing the STEM Pipeline.” ACP. Massi, Lisa et al. “YES: A NSF S-STM Scholarship Program Experience at the University of Central Florida.” ACP. McCurdy, Ross. “Fuel Cell and Alternative Energy Education Program and Projects in the High School.” NE. Miertschin, Susan, Carole Goodson, and Susan Schroeder. “Online Tutoring Support Service for STEM.” ACP. Newman, Jerry. “Introducing High School Girls to PC Board Assembly.” SEE. Perez, Dorene et al. “Guitar Building Gives High School Students a Taste of Engineering.” IL/IN. Pulecio, Javier F., Alexandra Pilecio, Michaela Westlake, and Sanjukta Bhanja. “A Snapshot of Young America‟s Perspective towards STEM.” Reid, Kenneth J., and Megan Balkovic. “Initial Assessment of the Effectiveness of a Nationwide High School Extracurricular Engineering Program: JETS TEAMS Competition.” WIP. FIE. Rockland, Ron et al. “Advancing the „E‟ in K-12 STEM Education.” Journal of Technology Studies 36, no. 1 (Spring 2010): 53-61. Skorinka, Jeanine et al. “The Social Outcomes of Participating in the FIRST Robotics Competition Community.” NE. Strutz, Michelle. “Identifying Engineering Interest and Potential in Middle School Students: Developing an Instrument.” IL/IN. Westheider, Virginia, and Patrick Brown. “University and Urban High Schools Team to Use Lego Robots to Teach Physics.” ACP. Zilora, Stephen J. “Preparing High School Students for College with Informatics.” NE.

Technical Communication

Alley, Michael, Joanna Garner, and Sarah Zappe. “Projected Words Per Minute: A Window into the Potential Effectiveness of Presentation Slides.” ACP. Ahmadian, Mohamad, and Tom Brown. “Emphasizing Multidisciplinary Teamwork and Enhancing Communication Skills through Development of a Conceptual Business Plan.” ACP. Beer, David F., and David A. McMurrey. A Guide to Writing as an Engineer. 3rd ed. New York: John Wiley & Sons. Conrad, Susan, Peter Dusicksa, and Timothy Pfeiffer. “Understanding Student and Workplace Writing in Civil Engineering.” Zone. Craig, Jennifer, Mya Poe, and María-Fernanda González Rojas. “Professional Communication Education in a Global Context: A Collaboration Between the Massachusetts Institute of Technology, Instituto Tecnológico y de Estudios Superiores de Monterrey, Mexico, and Universidad de Quintana Roo, Mexico.” Journal of Business and Technical Communication 24 (July 2010): 267-95. Dobrin, Sidney I., Christian R. Weisser, and Christopher J. Keller. Technical Communication in the Twenty-First Century. 2nd ed. Upper Saddle River, NJ: Prentice Hall, 2010. Eischhorn, Kristen et al. “Infusing Communication Skills in an Engineering Curriculum.” ACP. Estell, John K., Kenneth Reid, and Laurie Laird. “Cheeseburger, Fries, and a Coke: It‟s about the Presentation.” ACP. Fu, Peilin, Shekar Viswanathan, Ronald Uhlig, and Howard Evans. “Improving Technical Writing among Engineering and Technology Students.” ACP. Gerson, Sharon, and Steven Gerson. Workplace Writing: Planning, Packaging, and Perfecting Communication. Upper Saddle River, NJ: Prentice Hall, 2010. Gygi, Kathleen, and Mark Zachry. “Productive Tensions and the Regulatory Work of Genres in the Development of an Engineering Communication Workshop in a Transnational Corporation.” Journal of Business and Technical Communication 24 (July 2010): 358-81. Harvey, Roberta, and Jennifer Kadlowsec. “Retention and Application of Writing Skills Learned in Sophomore Clinic I.” WIP. FIE. Lockwood, Sarah, Daryl Caswell, and Marjan Eggermost. “Communications Instruction in First Year Engineering: The Glue.” ACP. McCullough, Claire L. “A Comedy of Errors: Teaching Oral Presentation Skills Using a Spectacularly Bad Presentation.” SEE. Nicometo, Christine et al. “„More Than Engineers‟–How Engineers Define and Value Communication Skills on the Job.” ACP. Pfeiffer, William S., and Kaye E. Adkins. Technical Communication: A Practical Approach. 7th ed. Upper Saddle River, NJ: Prentice Hall, 2010. Richards, Beth, and Ivana Milanovic. “Partnership between Engineering and Professional Writing.”

ACP. Ross, Paul. “Space Exploration: Science, Engineering, and Social Impact in a Freshman Technical Communication Course.” ACP. Shatz, Lisa. “Incorporating Design in a Class Teaching Technical Communication Skills.” NE. Swatrz, Thomas, Edmund Tsang, and Kimberly Harms. “Changes in First-Year Technical Writing Class to Support Student Success and Retention in Engineering and Applied Sciences.” FIE. Waggenspack, Warren et al. “Incorporating Visual Communication Assignments to Enrich. Education in All Engineering Disciplines.”ACP.

Technical Graphics Acheson, D. C., and M. W. Ballantyne. “A Case Study on the Planning, Formulating and Offering of a Computer Graphics Program Abroad.” EDGD. Avanzato, Robert. “3D Modeling and Animation in a Virtual World.” MIDAT2. Blasko, Dawn, and Kathy Holliday-Darr. “Longitudinal Analysis of Spatial Skills Training in Engineering Graphics.” EDGD. Branoff, Theodore J., Mark A. Shreve, and Eric N. Wiebe. “Blended Instruction in an Introductory Engineering Graphics Course: Understanding How Students Utilize Online Instructional Resources.” SEE. Chin, Robert A., and Nancy E. Study. “Manuscript Publication Aided by Open Journal Systems: A Case Study.” SEE. Clark, Aaron, Jeremy Ernst, and Brian Downs. “A Survey of Graphic Professionals Focused on Distance Education Trends in Technical/Engineering.” ACP. Connolly, Patrick et al. “Relational Geometry in Surface-Driven Modeling.” EDGD. Connolly, Patrick et al. “Spatial Ability Testing with Augmented Reality.” ACP. Haque, Mohammed. “Multidimensional Construction Visualizations with Examples: Suggested Topics for Graduate Course.” ACP. Heidari, Farzin. “Status Study of CAD/CAM/CNC Integration in South Texas Technical Colleges.” ACP. Jones, Bruce W. “Teaching Computer Graphics in an Online Environment.” EDGD. Kellie, Andrew C. “The Wireframe Model–Showing 3D Structure in Open Space.” EDGD. Krueger, Thomas, and Kendall Berns. “Extending the Concurrent Engineering Design Graphics Paradigm to 3D Scanning.” EDGD.

Krueger, Thomas J., and Ronald E. Barr. “Extending the Concurrent Engineering Design Paradigm to 3D Printing.” EDGD. Lane, Diamant, and Niall Seery. “Freehand Sketching as a Catalyst for Developing Concept-Driven Competencies.” ACP. Lane, Diamant, Niall Seery, and Seamus Gordon. “Freehand Sketching in a Digital Image Culture.” EDGD. Murray. Greg, and Tim Thomas. “Choosing the Right Parametric Modeling Software for Your ET Programs.” MW. Pan, Rui (Celia Shih-Ping Kuo, and Johannes Strobel. “Interplay of Computer- and Paper-Based Sketching in Design.” ACP. Otey, J. M., and M. M. Whiteacre. “Engineering Graphics in a Project Based Curriculum.” EDGD. Sadowski, Mary, and Patrick Connolly. “A Delphi Survey to Determine Name Change Possibilities for the Engineering Design Graphics Division.” ACP. Seery, Niall, Diamant Lane, and Donald Cantly. “Pedagogical Challenges Facing Design and Communication Graphics.” EDGD. Totten, Richard A., and Theodore J. Branoff. “Online Learning in Engineering Graphics Courses: What Are Some of the Big Issues?” EDGD. Westmoreland, Sophoria, and Linda Schmidt. “What Engineering Designers Leave Behind: Developing a Cognitive Coding Scheme for Student Design Journals.” ASME. Paper no. 38997. Whittington, Jana, Kim J. Nankivell, and Joy L. Colwell. “Meeting Student and Industry Needs through Experiential Learning and Soft Skills Study in Computer Graphics.” The Technology Interface International Journal 11, no. 1 (Fall/Winter 2010): 60-65. http://www.tiij.org/issues/winter2010/files/TIIJ%20fall-spring%202010-PDW2.pdf Wiebe, Eric, Theodore Branoff, and Mark Shreve. “Paths to Learning: Understanding How Students Utilize Online Instructional Resources in an Introductory Engineering Graphics Course.” ACP. Yip-Hoi, Derek. “CAD Instruction Techniques for Advanced Assembly Modeling and Mechanics Design.” ACP. Yip-Hoi, Derek. “Strategies for Teaching CAD Automation to Engineers and Technologists.” ACP.

Acknowledgments The annual bibliography is a special project of ASEE‟s Engineering Technology Council. Our thanks to the many engineering technology professionals who took time from their busy schedules to contribute their publication listings.

Biography Marilyn Dyrud is a full professor in the Communication Department at Oregon Institute of Technology and regularly teaches classes in business and technical writing, public speaking, rhetoric, and ethics; she is part of the faculty team for the Civil Engineering Department‟s integrated senior project. She is active in ASEE as a regular presenter, moderator, and paper reviewer; she has also served as her campus‟ representative for 17 years, as chair of the Pacific Northwest Section, and as section newsletter editor. She was named an ASEE Fellow in 2008 and has compiled the bibliography for more than 20 years. Currently, she is on two division boards, Engineering Technology and Engineering Ethics, and serves as Zone IV chair. In 2010, she received the McGraw Award. In addition to ASEE, Marilyn is active in the Association for Practical and Professional Ethics and the Association for Business Communication, serving on the editorial boards of two journals and editing a teaching section for ABC‟s pedagogical journal.