BS EN 14015:2004. Specification for the design and manufacture of site built,
vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the.
BRITISH STANDARDS BS 2A 293:2005 Procurement of self-locking nuts with non-metallic locking elements. Metric series. Specification supersedes BS A 293:1983 ISBN 0 580 45229 8 £43.00 members £86.00 non-members ACE/12 BS 6068:Water quality BS 6068-2:Physical, chemical and biochemical methods BS 6068-2.54:Determination of suspended solids. Method by filtration through glass fibre filters See BS EN 872. BS 6068-2.86:Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by flow injection analysis (FIA) See BS EN ISO 15681-1. BS 6068-2.87:Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by continuous flow analysis (CFA) See BS EN ISO 15681-2. BS 6068-2.93:Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection See BS EN ISO 11732. BS 6121:Mechanical cable glands BS 6121-1:2005 Armour glands. Requirements and test methods supersedes BS 6121-1:1989 ISBN 0 580 45374 X £24.00 members £48.00 non-members GEL/20/11/1
BS EN PUBLICATIONS
BS 6121-5:2005 Code of practice for selection, installation and inspection of cable glands and armour glands supersedes BS 6121-5:1993 ISBN 0 580 45375 8 £30.00 members £60.00 non-members GEL/20/11/1
BS 8419-2:2005 Code of practice for the development of interoperability between application profiles no current standard is superseded ISBN 0 580 45243 3 £43.00 members £86.00 non-members IST/43
BS 7000:Design management systems
BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures no current standard is superseded ISBN 0 580 44831 2 £24.00 members £48.00 non-members B/547
BS 7000-6:2005 Managing inclusive design. Guide no current standard is superseded ISBN 0 580 44902 5 £61.00 members £122.00 non-members MS/4/-/10 BS 7079:Preparation of steel substrates before application of paints and related products BS 7079:Group C:Surface roughness characteristics of blast-cleaned steel substrates BS 7079-C5:Replica tape method for the determination of the surface profile See BS EN ISO 8503-5. BS 8415:2005 Monuments within burial grounds and memorial sites. Specification no current standard is superseded ISBN 0 580 45245 X £43.00 members £86.00 non-members B/545 BS 8419:Interoperability between metadata systems used for learning, education and training BS 8419-1:2005 Code of practice for the development of application profiles no current standard is superseded ISBN 0 580 45242 5 £50.00 members £100.00 non-members IST/43
BS 8452:2005 Use of clamp-on (externally mounted) transit time metering techniques for liquid applications. Guide no current standard is superseded ISBN 0 580 45228 X £58.00 members £116.00 non-members CPI/30/5/1
BS EN PUBLICATIONS BS EN 71:Safety of toys BS EN 71-9:2005 Organic chemical compounds. Requirements no current standard is superseded ISBN 0 580 45609 9 £30.00 members £60.00 non-members CW/15 BS EN ISO 105:Textiles. Tests for colour fastness BS EN ISO 105-P02:2004 Colour fastness to pleating. Steam pleating supersedes BS EN ISO 105-P02:1996 ISBN 0 580 45466 5 £30.00 members £60.00 non-members TCI/81
Page 1 of 66
BS EN ISO 139:2005 Textiles. Standard atmospheres for conditioning and testing supersedes BS EN 20139:1992 ISBN 0 580 45416 9 £30.00 members £60.00 non-members TCI/24
BS EN 1330-7:2005 Terms used in magnetic particle testing supersedes BS 3683-2:1985 ISBN 0 580 45458 4 £43.00 members £86.00 non-members WEE/46
BS EN 1994-1-1:2004 General rules and rules for buildings supersedes DD ENV 1994-1-1:1994 ISBN 0 580 45569 6 £76.00 members £152.00 non-members B/525/4
BS EN ISO 176:2005 Plastics. Determination of loss of plasticizers. Activated carbon method supersedes BS EN ISO 176:2000 ISBN 0 580 45488 6 £24.00 members £48.00 non-members PRI/21
BS EN 1825:Grease separators
BS EN 3841:Aerospace series. Circuit breakers. Test methods
BS EN 309:2005 Particleboards. Definition and classification supersedes BS EN 309:1992 ISBN 0 580 45418 5 £24.00 members £48.00 non-members
BS EN 1856:Chimneys. Requirements for metal chimneys B/541
BS EN ISO 534:2005 Paper and board. Determination of thickness, density and specific volume supersedes BS EN 20534:1993 ISBN 0 580 45489 4 £30.00 members £60.00 non-members PAI/11 BS EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet supersedes BS EN 612:1996 ISBN 0 580 45509 2 £30.00 members £60.00 non-members B/542/8 BS EN 872:2005 (BS 6068-2.54:2005) Water quality. Determination of suspended solids. Method by filtration through glass fibre filters supersedes BS EN 872:1996 ISBN 0 580 45513 0 £24.00 members £48.00 non-members EH/3/2 BS EN 1330:Non-destructive testing. Terminology BS EN PUBLICATIONS
BS EN 1825-1:2004 Principles of design, performance and testing, marking and quality control no current standard is superseded ISBN 0 580 45443 6 £61.00 members £122.00 non-members B/505
BS EN 1856-2:2004 Metal liners and connecting flue pipes partially supersedes BS 715:1993 ISBN 0 580 45448 7 £50.00 members £100.00 non-members B/506 BS EN 1992:Eurocode 2. General rules BS EN 1992-1:Structural fire design BS EN 1992-1-2:2004 Design of concrete structures supersedes DD ENV 1992-1-2:1996 ISBN 0 580 45414 2 £67.00 members £134.00 non-members B/525/2 BS EN 1994:Eurocode 4 BS EN 1994-1:Design of composite steel and concrete structures
BS EN 3841-100:2004 General no current standard is superseded ISBN 0 580 45521 1 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-201:2004 Visual inspection no current standard is superseded ISBN 0 580 45522 X £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-202:2004 Dimensions and masses no current standard is superseded ISBN 0 580 45523 8 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-301:2004 Voltage drop no current standard is superseded ISBN 0 580 45524 6 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-302:2004 Insulation resistance no current standard is superseded ISBN 0 580 45525 4 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-303:2004 Dielectric strength no current standard is superseded ISBN 0 580 45526 2 £24.00 members £48.00 non-members ACE/6/5
Page 2 of 66
BS EN 3841-304:2004 Tripping points no current standard is superseded ISBN 0 580 45527 0 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-305:2004 Short-circuit performance no current standard is superseded ISBN 0 580 45528 9 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-306:2004 Service life no current standard is superseded ISBN 0 580 45529 7 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-405:2004 Fluid resistance no current standard is superseded ISBN 0 580 45535 1 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-406:2004 Flammability no current standard is superseded ISBN 0 580 45536 X £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-407:2004 Temperature variation no current standard is superseded ISBN 0 580 45537 8 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-506:2004 Vibration performance no current standard is superseded ISBN 0 580 45542 4 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-507:2004 Mechanical shocks no current standard is superseded ISBN 0 580 45543 2 £24.00 members £48.00 non-members ACE/6/5 BS EN 3841-508:2004 Centrifugal acceleration no current standard is superseded ISBN 0 580 45544 0 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-307:2004 Performance with a locked tripping system no current standard is superseded ISBN 0 580 45530 0 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-501:2004 Actuator button travel no current standard is superseded ISBN 0 580 45538 6 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-509:2004 Insertion and extraction forces of signal contact terminals no current standard is superseded ISBN 0 580 45545 9 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-308:2004 Lightning no current standard is superseded ISBN 0 580 45531 9 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-503:2004 Strength of actuating components no current standard is superseded ISBN 0 580 45539 4 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-510:2004 Strength of signal contact terminals no current standard is superseded ISBN 0 580 45546 7 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-401:2004 Sand and dust no current standard is superseded ISBN 0 580 45532 7 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-504:2004 Strength of mounting elements no current standard is superseded ISBN 0 580 45540 8 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-511:2004 Combined test: temperature, altitude and vibration no current standard is superseded ISBN 0 580 45547 5 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-402:2004 Corrosion no current standard is superseded ISBN 0 580 45533 5 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-505:2004 Strength of main terminals no current standard is superseded ISBN 0 580 45541 6 £24.00 members £48.00 non-members ACE/6/5
BS EN 3841-404:2004 Explosion proofness no current standard is superseded ISBN 0 580 45534 3 £24.00 members £48.00 non-members ACE/6/5 BS EN PUBLICATIONS
BS EN ISO 4797:2004 Laboratory glassware. Boiling flasks with conical ground joints supersedes BS 6352:1983 ISBN 0 580 45407 X £24.00 members £48.00 non-members LBI/36/1 BS EN ISO 5269:Pulps. Preparation of laboratory sheets for physical testing
Page 3 of 66
BS EN ISO 5269-1:2005 Conventional sheet-former method supersedes BS EN ISO 5269-1:2001 ISBN 0 580 45486 X £30.00 members £60.00 non-members PAI/11
BS EN ISO 9100-7:2005 58 deep no current standard is superseded ISBN 0 580 45436 3 £24.00 members £48.00 non-members PKW/0
BS EN 10217-7:2005 Stainless steel tubes supersedes BS 3605-2:1992 ISBN 0 580 45610 2 £50.00 members £100.00 non-members
BS EN ISO 6530:2005 Protective clothing. Protection against liquid chemicals. Test method for resistance of materials to penetration by liquids supersedes BS EN 368:1993 ISBN 0 580 45484 3 £30.00 members £60.00 non-members PH/3/3
BS EN ISO 9100-8:2005 63, 66 and 70 regular no current standard is superseded ISBN 0 580 45437 1 £43.00 members £86.00 non-members PKW/0
BS EN 10328:2005 Iron and steel. Determination of the conventional depth and hardening after surface heating supersedes BS 6481:1984 ISBN 0 580 45510 6 £24.00 members £48.00 non-members ISE/72
BS EN ISO 7539:Corrosion of metals and alloys. Stress corrosion testing BS EN ISO 7539-7:2005 Method for slow strain rate testing supersedes BS EN ISO 7539-7:1995 ISBN 0 580 45476 2 £30.00 members £60.00 non-members ISE/NFE/8 BS EN ISO 9100:Glass containers. Vacuum lug finishes BS EN ISO 9100-1:2005 General no current standard is superseded ISBN 0 580 45433 9 £24.00 members £48.00 non-members PKW/0 BS EN ISO 9100-5:2005 43 and 48 regular no current standard is superseded ISBN 0 580 45434 7 £24.00 members £48.00 non-members PKW/0 BS EN ISO 9100-6:2005 53 and 58 regular no current standard is superseded ISBN 0 580 45435 5 £24.00 members £48.00 non-members PKW/0
BS EN PUBLICATIONS
BS EN ISO 9100-9:2005 63, 66 and 70 deep no current standard is superseded ISBN 0 580 45438 X £24.00 members £48.00 non-members PKW/0 BS EN ISO 9100-10:2005 77 regular no current standard is superseded ISBN 0 580 45439 8 £24.00 members £48.00 non-members PKW/0 BS EN ISO 9100-11:2005 82 regular no current standard is superseded ISBN 0 580 45440 1 £24.00 members £48.00 non-members PKW/0 BS EN ISO 9100-12:2005 89 regular no current standard is superseded ISBN 0 580 45441 X £24.00 members £48.00 non-members PKW/0 BS EN ISO 9554:2005 Fibre ropes. General specifications supersedes BS EN 701:1995 ISBN 0 580 45487 8 £43.00 members £86.00 non-members TCI/77 BS EN 10217:Welded steel tubes for pressure purposes. Technical delivery conditions
ISE/73/1
BS EN ISO 11146:Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios BS EN ISO 11146-1:2005 Stigmatic and simple astigmatic beams partially supersedes BS EN ISO 11146:2000 which remains current ISBN 0 580 45417 7 £43.00 members £86.00 non-members CPW/172 BS EN ISO 11553:Safety of machinery. Laser processing machines BS EN ISO 11553-1:2005 General safety requirements supersedes BS EN 12626:1997 ISBN 0 580 45483 5 £43.00 members £86.00 non-members CPW/172 BS EN ISO 11732:2005 (BS 6068-2.93:2005) Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection supersedes BS EN ISO 11732:1997 ISBN 0 580 45490 8 £43.00 members £86.00 non-members EH/3/4 BS EN 12285:Workshop fabricated steel tanks
Page 4 of 66
BS EN 12285-2:2005 Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids no current standard is superseded ISBN 0 580 45514 9 £50.00 members £100.00 non-members PVE/21 BS EN 12312:Aircraft ground support equipment. Specific requirements BS EN 12312-5:2005 Aircraft fuelling equipment no current standard is superseded ISBN 0 580 45507 6 £50.00 members £100.00 non-members ACE/57 BS EN 12387:2005 Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements no current standard is superseded ISBN 0 580 45508 4 £50.00 members £100.00 non-members MCE/3/12 BS EN ISO 12625:Tissue paper and tissue products BS EN ISO 12625-6:2005 Determination of grammage supersedes BS EN 12625-6:1999 ISBN 0 580 45485 1 £24.00 members £48.00 non-members PAI/11 BS EN 12697:Bituminous mixtures. Test methods for hot mix asphalt BS EN 12697-3:2005 Bitumen recovery. Rotary evaporator supersedes BS EN 12697-3:2000 ISBN 0 580 45429 0 £30.00 members £60.00 non-members B/510/1
BS EN PUBLICATIONS
BS EN 12697-4:2005 Bitumen recovery. Fractionating column supersedes BS EN 12697-4:2000 ISBN 0 580 45427 4 £30.00 members £60.00 non-members B/510/1 BS EN 12873:Influence of materials on water intended for human consumption. Influence due to migration BS EN 12873-2:2005 Test method for non-metallic and non-cementitious site-applied materials no current standard is superseded ISBN 0 580 45516 5 £43.00 members £86.00 non-members EH/6 BS EN 12940:2004 Footwear manufacturing wastes. Waste classification and management supersedes DD ENV 12940:1999 ISBN 0 580 45496 7 £24.00 members £48.00 non-members TCI/69 BS EN 13204:2004 Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements no current standard is superseded ISBN 0 580 45396 0 £61.00 members £122.00 non-members FSH/17/7 BS EN 13402:Size designation of clothes BS EN 13402-3:2004 Measurements and intervals no current standard is superseded ISBN 0 580 45571 8 £43.00 members £86.00 non-members TCI/66
BS EN 13967:2004 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics no current standard is superseded ISBN 0 580 45515 7 £43.00 members £86.00 non-members B/546 BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above supersedes BS 2657:1974 ISBN 0 580 45461 4 £96.00 members £192.00 non-members PVE/15 BS EN 14195:2005 Metal framing components for gypsum plasterboard systems. Definitions, requirements and test methods no current standard is superseded ISBN 0 580 45512 2 £43.00 members £86.00 non-members B/544/2 BS EN 14278:Textiles. Determination of cotton fibre stickiness BS EN 14278-1:2004 Method using a manual thermodetection device no current standard is superseded ISBN 0 580 45392 8 £24.00 members £48.00 non-members TCI/24 BS EN 14348:2005 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants. Test methods and requirements (phase 2, step 1) no current standard is superseded ISBN 0 580 45419 3 £50.00 members £100.00 non-members CH/216
Page 5 of 66
BS EN 14431:2004 Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture no current standard is superseded ISBN 0 580 45467 3 £24.00 members £48.00 non-members STI/36 BS EN 14434:2004 Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods no current standard is superseded ISBN 0 580 45460 6 £50.00 members £100.00 non-members FW/0 BS EN 14462:2005 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3 no current standard is superseded ISBN 0 580 45511 4 £50.00 members £100.00 non-members MCE/3/8 BS EN 14474:2004 Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods no current standard is superseded ISBN 0 580 45415 0 £30.00 members £60.00 non-members B/524 BS EN 14615:2005 Postal services. Digital postage marks. Applications, security and design no current standard is superseded ISBN 0 580 45451 7 £71.00 members £142.00 non-members SVS/4 BS EN 14617:Agglomerated stone. Test methods
BS EN PUBLICATIONS
BS EN 14617-2:2004 Determination of flexural strength (bending) no current standard is superseded ISBN 0 580 45444 4 £24.00 members £48.00 non-members B/545
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps no current standard is superseded ISBN 0 580 45370 7 £89.00 members £178.00 non-members PSE/17
BS EN 14716:2004 Stretched ceilings. Requirements and test methods no current standard is superseded ISBN 0 580 45449 5 £61.00 members £122.00 non-members
BS EN 50419:2005 Marking of electrical and electronic equipment in accordance with article 11(2) of directive 2002/96/EC (WEEE) no current standard is superseded ISBN 0 580 45447 9 £24.00 members £48.00 non-members L/7/1
I/BS EN 14772:2005 Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 no current standard is superseded ISBN 0 580 45504 1 £30.00 members £60.00 non-members PSE/2 BS EN ISO 16047:2005 Fasteners. Torque/clamp force testing no current standard is superseded ISBN 0 580 45577 7 £43.00 members £86.00 non-members FME/9/1 BS EN ISO 16484:Building automation and control systems (BACS) BS EN ISO 16484-3:2005 Functions no current standard is superseded ISBN 0 580 45387 1 £67.00 members £134.00 non-members RHE/16 BS EN ISO/IEC 17040:2005 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies no current standard is superseded ISBN 0 580 45432 0 £43.00 members £86.00 non-members QS/3
BS EN 60034:Rotating electrical machines BS EN 60034-11:2004 Thermal protection supersedes BS 4999-111:1987 ISBN 0 580 45409 6 £30.00 members £60.00 non-members PEL/2 BS EN 60079:Electrical apparatus for explosive gas atmospheres BS EN 60079-26:2004 Construction, test and marking of group II category I G electrical apparatus supersedes BS EN 50284:1999 £30.00 members £60.00 non-members GEL/31 BS EN 60191:Mechanical standardization of semiconductor devices BS EN 60191-6:2004 General rules for the preparation of outline drawings of surface mounted semiconductor device packages supersedes BS 3934-6:1992 ISBN 0 580 45493 2 £50.00 members £100.00 non-members EPL/47 BS EN 60255:Electrical relays
Page 6 of 66
BS EN 60255-26:2005 Electromagnetic compatibility requirements for measuring relays and protection equipment supersedes BS EN 50263:2000 ISBN 0 580 45471 1 £30.00 members £60.00 non-members PEL/95
BS EN 60939-2-1:2004 Filters for which safety tests are required (assessment level D/DZ) supersedes BS EN 133201:1998 which remains current ISBN 0 580 45380 4 £30.00 members £60.00 non-members EPL/40
BS EN 60526:2004 High-voltage cable plug and socket connections for medical X-ray equipment supersedes BS 6038:1980 ISBN 0 580 45459 2 £30.00 members £60.00 non-members CH/62/2
BS EN 60939-2-2:2004 Filters for which safety tests are required (safety tests only) supersedes BS EN 133221:1998 which remains current ISBN 0 580 45378 2 £30.00 members £60.00 non-members EPL/40
BS EN 60609:Hydraulic turbines, storage pumps and pump-turbines. Cavitation pitting evaluation
BS EN 61000:Electromagnetic compatibility (EMC)
BS EN 61747-2-2:2004 Blank detail specification no current standard is superseded ISBN 0 580 45495 9 £24.00 members £48.00 non-members EPL/47
BS EN 61000-4:Testing and measurement techniques
BS EN 61747-4:Essential ratings and characteristics
BS EN 61000-4-4:2004 Electrical fast transient/burst immunity test supersedes BS EN 61000-4-4:1995 which remains current ISBN 0 580 45379 0 £50.00 members £100.00 non-members GEL/210/12
BS EN 61747-4-1:2004 Essential ratings and characteristics no current standard is superseded ISBN 0 580 45494 0 £24.00 members £48.00 non-members EPL/47
BS EN 60609-1:2005 Evaluation in reaction turbines, storage pumps and pumps-turbines no current standard is superseded ISBN 0 580 45403 7 £43.00 members £86.00 non-members MCE/15 BS EN 60774:Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS BS EN 60774-5:2004 D-VHS no current standard is superseded ISBN 0 580 45341 3 £89.00 members £178.00 non-members EPL/100 BS EN 60939:Complete filter units for radio interference suppression BS EN 60939-2:Blank detail specification. Passive filter units for electromagnetic interference suppression
BS EN 61094:Measurement microphones BS EN 61094-6:2005 Electrostatic actuators for determination of frequency response no current standard is superseded ISBN 0 580 45431 2 £43.00 members £86.00 non-members EPL/29 BS EN 61606:Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics BS EN 61606-1:2004 General supersedes BS EN 61606:1997 ISBN 0 580 45333 2 £50.00 members £100.00 non-members EPL/100
BS EN PUBLICATIONS
BS EN 61606-2:2004 Consumer use supersedes BS EN 61606:1997 ISBN 0 580 45332 4 £50.00 members £100.00 non-members EPL/100 BS EN 61747:Liquid crystal display devices BS EN 61747-2:Matrix colour LCD modules
BS EN 61754:Fibre optic connector interfaces BS EN 61754-7:2005 Type MPO connector family supersedes BS EN 61754-7:2001 ISBN 0 580 45472 X £43.00 members £86.00 non-members GEL/86/2 BS EN 61800:Adjustable speed electrical power drive systems BS EN 61800-3:2004 EMC requirements and specific test methods supersedes BS EN 61800-3:1997 which remains current ISBN 0 580 45367 7 £76.00 members £152.00 non-members PEL/22
Page 7 of 66
BS EN 62150:Fibre optic active components and devices. Test and measurement procedures BS EN 62150-2:2004 ATM-PON transceivers no current standard is superseded ISBN 0 580 45385 5 £43.00 members £86.00 non-members GEL/86/3 BS EN 62226:Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body BS EN 62226-2:Exposure to magnetic fields BS EN 62226-2-1:2005 2D models no current standard is superseded ISBN 0 580 45402 9 £61.00 members £122.00 non-members GEL/106 BS EN 62356:Video recording. 12,65 mm type D-11 format BS EN 62356-2:2004 Picture compression and data stream no current standard is superseded ISBN 0 580 45327 8 £61.00 members £122.00 non-members EPL/100 BS EN 82045:Document management BS EN 82045-2:2005 Metadata elements and information reference model no current standard is superseded ISBN 0 580 45564 5 £71.00 members £142.00 non-members GEL/3
BS ENs IMPLEMENTED BY AMENDMENT
BS IMPLEMENTATIONS
BS EN ISO 8503:Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates BS EN ISO 8503-5:2004 (BS ISO 8503-5:2003, BS 7079-C5:2003) Replica tape method for the determination of the surface profile STI/21 Implementation of European standard EN ISO 8503-5 by amendment to dual-numbered standard BS ISO 8503-3:2003, BS 7079-C5:2003. BS EN ISO 15681:Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) BS EN ISO 15681-1:2004 (BS ISO 15681-1:2003, BS 6068-2.86:2003) Method by flow injection analysis (FIA) EH/3/2 Implementation of Euroepan standard EN ISO 15681-1 by amendment to the dual-numbered standard BS ISO 15681-1:2003, BS 6068-2.86:2003. BS EN ISO 15681-2:2004 (BS ISO 15681-2:2003, BS 6068-2.87:2003) Method by continuous flow analysis (CFA) EH/3, EH/3/2 Implementation of European standard EN ISO 15681-2 by amendment to the dual-numbered standard BS ISO 15681-2:2003, BS 6068-2.87:2003. BS EN ISO 19101:2005 (BS ISO 19101:2002) Geographic information. Reference model IST/36 Implementation of European standard EN ISO 19101 by amendment to BS ISO 19101:2002. BS EN ISO 19105:2005 (BS ISO 19105:2000) Geographic information. Conformance and testing IST/36 Implementation of European standard EN ISO 19105 by amendment to BS ISO 19105:2000.
BS IMPLEMENTATIONS BS ISO 1268:Fibre-reinforced plastics. Methods of producing test plates BS ISO 1268-10:2005 Injection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens no current standard is superseded ISBN 0 580 45477 0 £43.00 members £86.00 non-members PRI/42 BS ISO 1268-11:2005 Injection moulding of BMC and other long-fibre moulding compounds. Small plates no current standard is superseded ISBN 0 580 45478 9 £30.00 members £60.00 non-members PRI/42 BS ISO 1793:2005 Cinematography. Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size). Dimensions supersedes BS 5550-2.9.1:1978 and BS 5550-2.9.2:1980 ISBN 0 580 45442 8 £24.00 members £48.00 non-members CPW/36 BS ISO 2017:Mechanical vibration and shock. Resilient mounting systems BS ISO 2017-1:2005 Technical information to be exchanged for the application of isolation systems supersedes BS 6414:1983 ISBN 0 580 45548 3 £43.00 members £86.00 non-members GME/21/5 BS ISO 3984:2004 Road vehicles. Rear moving barrier impact test procedure no current standard is superseded ISBN 0 580 45517 3 £30.00 members £60.00 non-members AUE/15 BS ISO 4625:Binders for paint and varnishes. Determination of softening point Page 8 of 66
BS ISO 4625-1:2004 Ring-and-ball method no current standard is superseded ISBN 0 580 45382 0 £30.00 members £60.00 non-members STI/3 BS ISO 4625-2:2004 Cup-and-ball method no current standard is superseded ISBN 0 580 45383 9 £24.00 members £48.00 non-members STI/3 BS ISO 5636:Paper and board. Determination of air permeance (medium range) BS ISO 5636-4:2005 Sheffield method no current standard is superseded ISBN 0 580 45480 0 £30.00 members £60.00 non-members PAI/11 BS ISO 7876:Fuel injection equipment. Vocabulary BS ISO 7876-4:2004 High-pressure pipes and end-connections supersedes BS AU 260-4:1995 ISBN 0 580 45320 0 £30.00 members £60.00 non-members MCE/22 BS ISO 9136:Abrasive grains. Determination of bulk density BS ISO 9136-1:2004 Macrogrits supersedes BS 7425-1:1991 ISBN 0 580 45469 X £24.00 members £48.00 non-members MTE/13 BS ISO 9564:Banking. Personal identification number management and security
BS IMPLEMENTATIONS
BS ISO 9564-2:2005 Approved algorithms for PIN encipherment no current standard is superseded ISBN 0 580 45446 0 £24.00 members £48.00 non-members IST/12 BS ISO 11929:Determination of the detection limit and decision threshold for ionizing radiation measurements BS ISO 11929-6:2005 Fundamentals and applications to measurements by use of transient mode no current standard is superseded ISBN 0 580 45550 5 £43.00 members £86.00 non-members NCE/2 BS ISO 11929-7:2005 Fundamentals and general applications no current standard is superseded ISBN 0 580 45551 3 £43.00 members £86.00 non-members NCE/2 BS ISO 11929-8:2005 Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment no current standard is superseded ISBN 0 580 45552 1 £43.00 members £86.00 non-members NCE/2 BS ISO 12986:Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks BS ISO 12986-2:2005 Determination of flexural strength by the four-point method no current standard is superseded ISBN 0 580 45339 1 £24.00 members £48.00 non-members CII/24
BS ISO 14154:2005 Soil quality. Determination of some selected chlorophenols. Gas-chromatographic method with electron-capture detection no current standard is superseded ISBN 0 580 45445 2 £30.00 members £60.00 non-members EH/4/3 BS ISO 14853:2005 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production no current standard is superseded ISBN 0 580 45481 9 £50.00 members £100.00 non-members PRI/21 BS ISO 14892:2002 Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography no current standard is superseded ISBN 0 580 45404 5 £30.00 members £60.00 non-members AW/5 BS ISO 15202:Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry BS ISO 15202-2:2001 Sample preparation no current standard is superseded ISBN 0 580 45324 3 £58.00 members £116.00 non-members EH/2/2 BS ISO 16000:Indoor air BS ISO 16000-1:2004 General aspects of sampling strategy no current standard is superseded ISBN 0 580 45391 X £43.00 members £86.00 non-members EH/2/3
Page 9 of 66
BS ISO 16000-2:2004 Sampling strategy for formaldehyde no current standard is superseded ISBN 0 580 45390 1 £43.00 members £86.00 non-members EH/2/3 BS ISO 16000-4:2004 Determination of formaldehyde. Diffusive sampling method no current standard is superseded ISBN 0 580 45405 3 £30.00 members £60.00 non-members EH/2/3 BS ISO 16160:2005 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances no current standard is superseded ISBN 0 580 45554 8 £24.00 members £48.00 non-members ISE/10 BS ISO 16162:2005 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances no current standard is superseded ISBN 0 580 45555 6 £24.00 members £48.00 non-members ISE/10 BS ISO 16163:2005 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances no current standard is superseded ISBN 0 580 45556 4 £24.00 members £48.00 non-members ISE/10 BS ISO 16305:2005 Butter. Determination of firmness no current standard is superseded ISBN 0 580 45550 5 £30.00 members £60.00 non-members AW/5 BS ISO 16549:2004 Textiles. Unevenness of textile strands. Capacitance method no current standard is superseded ISBN 0 580 45397 9 £30.00 members £60.00 non-members TCI/24 BS IMPLEMENTATIONS
BS ISO 16740:2005 Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide no current standard is superseded ISBN 0 580 45558 0 £58.00 members £116.00 non-members EH/2/2
BS ISO 18669-2:2004 Inspection measuring principles no current standard is superseded ISBN 0 580 45388 X £30.00 members £60.00 non-members MCE/14/-/10 BS ISO 18857:Water quality. Determination of selected alkylphenols
BS ISO 16805:2005 Binders for paints and varnishes. Determination of glass transition temperature no current standard is superseded ISBN 0 580 45381 2 £24.00 members £48.00 non-members STI/3
BS ISO 18857-1:2005 Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection no current standard is superseded ISBN 0 580 45393 6 £43.00 members £86.00 non-members EH/3/2
BS ISO/IEC 18032:2005 Information technology. Security techniques. Prime number generation no current standard is superseded ISBN 0 580 45475 4 £43.00 members £86.00 non-members IST/33
BS ISO 19116:2004 Geographic information. Positioning services no current standard is superseded ISBN 0 580 45411 8 £61.00 members £122.00 non-members IST/36
BS ISO 18431:Mechanical vibration and shock. Signal processing BS ISO 18431-2:2004 Time domain windows for Fourier Transform analysis no current standard is superseded ISBN 0 580 45464 9 £30.00 members £60.00 non-members GME/21/2 BS ISO 18669:Internal combustion engines. Pistons pins BS ISO 18669-1:2004 General specifications no current standard is superseded ISBN 0 580 45389 8 £43.00 members £86.00 non-members MCE/14/-/10
BS ISO 19125:Geographic information. Simple feature access BS ISO 19125-1:2004 Common architecture no current standard is superseded ISBN 0 580 45413 4 £61.00 members £122.00 non-members IST/36 BS ISO 19125-2:2004 SQL option no current standard is superseded ISBN 0 580 45412 6 £61.00 members £122.00 non-members IST/36 BS ISO 20022:Financial services. Universal financial industry message scheme
Page 10 of 66
BS ISO 20022-1:2004 Overall methodology and format specifications for inputs to and outputs from the ISO 20022 repository supersedes BS ISO 15022-1:1999 ISBN 0 580 45498 3 £50.00 members £100.00 non-members IST/12
BS ISO 21870:2005 Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry no current standard is superseded ISBN 0 580 45395 2 £24.00 members £48.00 non-members PRI/50
PD CEN/TR 14862:2004 Precast concrete products. Full-scale testing requirements in standards on precast concrete products no current standard is superseded ISBN 0 580 45519 X £43.00 members £86.00 non-members B/524
BS ISO 20022-2:2004 Roles and responsibilities of the registration bodies supersedes BS ISO 15022-2:1999 ISBN 0 580 45499 1 £43.00 members £86.00 non-members IST/12
BS ISO 22090:Ships and marine technology. Transmitting heading devices (THDs)
PD ISO/TR 12350:2004 Road vehicles. Injury risk curves for evaluation of occupant protection in side impact no current standard is superseded ISBN 0 580 45428 2 £43.00 members £86.00 non-members AUE/7
BS ISO 20401:2005 Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm no current standard is superseded ISBN 0 580 45394 4 £24.00 members £48.00 non-members MCE/18 BS ISO 20566:2005 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory car-wash no current standard is superseded ISBN 0 580 45553 X £30.00 members £60.00 non-members STI/10 BS ISO 20805:2005 Hot-rolled sheet steel in coils of higher yield strength with improved formability and heavy thickness for cold forming no current standard is superseded ISBN 0 580 45479 7 £30.00 members £60.00 non-members ISE/10 BS ISO 20806:2004 Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors no current standard is superseded ISBN 0 580 45491 6 £43.00 members £86.00 non-members GME/21/8
DRAFTS FOR DEVELOPMENT
BS ISO 22090-1:2002 Gyro-compasses no current standard is superseded ISBN 0 580 45518 1 £30.00 members £60.00 non-members EPL/80 BS IEC 61588:2004 Precision clock synchronization protocol for networked measurement and control systems no current standard is superseded ISBN 0 580 45259 X £89.00 members £178.00 non-members AMT/7
PUBLISHED DOCUMENTS PD 2379:2005 Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition supersedes PD 2379:1994 ISBN 0 580 45244 1 £43.00 members £86.00 non-members GEL/20 PD 6545:2005 Intended use of human head and ear simulators-guide no current standard is superseded ISBN 0 580 45398 7 £61.00 members £122.00 non-members EPL/29
PD ISO/TR 16056:Health informatics. Interoperability of telehealth systems and networks PD ISO/TR 16056-1:2004 Introduction and definitions no current standard is superseded ISBN 0 580 45422 3 £43.00 members £86.00 non-members IST/35 PD ISO/TR 16056-2:2004 Real-time systems no current standard is superseded ISBN 0 580 45423 1 £61.00 members £122.00 non-members IST/35 PD ISO/TR 19122:2004 Geographic information / geomatics. Qualification and certification of personnel no current standard is superseded ISBN 0 580 45421 5 £71.00 members £142.00 non-members IST/36
DRAFTS FOR DEVELOPMENT DD 8431:2005 Electrical static meters for secondary metering and sub-metering. Specification no current standard is superseded ISBN 0 580 45117 8 £50.00 members £100.00 non-members PEL/13 Page 11 of 66
DD CEN/TS 14425:Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics DD CEN/TS 14425-5:2004 Single-edge vee-notch beam (SEVNB) method no current standard is superseded ISBN 0 580 45492 4 £15.00 members £30.00 non-members RPI/13 DD CLC/TS 50429:2005 Optical fibre cables. Sewer cables. Family specification for cables to be installed in storm and sanitary sewers no current standard is superseded ISBN 0 580 45566 1 £30.00 members £60.00 non-members GEL/86/1 DD CLC/TS 50430:2005 Optical fibre cables. Gas pipe cables. Family specifications for cables to be installed in high pressure gas pipes no current standard is superseded ISBN 0 580 45568 8 £30.00 members £60.00 non-members GEL/86/1 DD CLC/TS 50431:2005 Optical fibre cables. Drinking water pipe cables. Family specification for cables to be installed in drinking water pipes no current standard is superseded ISBN 0 580 45567 X £30.00 members £60.00 non-members GEL/86/1 DD CLC/TS 50433:2005 Guidelines for paving the way for broadband. "Broadband, 25 Mbit/s and more for all" no current standard is superseded ISBN 0 580 45565 3 £12.00 members £24.00 non-members GEL/86/1 DD ISO/TS 17450:Geometrical product specifications (GPS). General concepts
AMENDMENTS TO BRITISH STANDARDS
DD ISO/TS 17450-1:2005 Model for geometrical specification and verification no current standard is superseded ISBN 0 580 44385 X £50.00 members £100.00 non-members TDW/4
BIP 2074:2005 Electrical plugs and wiring and world electricity supplies supersedes TH 42140 ISBN 0 580 45158 5 £170.00 members £170.00 non-members
DD IEC/TS 62257:Recommendations for small renewable energy and hybrid systems for rural electrification
AMENDMENTS TO BRITISH STANDARDS
DD IEC/TS 62257-3:2004 Project development and management no current standard is superseded ISBN 0 580 45408 8 £43.00 members £86.00 non-members GEL/82
BS 6068:Water quality BS 6068-2:Physical, chemical and biochemical methods
AEROSPACE SERIES
BS 6068-2.86:Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by flow injection analysis (FIA) See BS ISO 15681-1.
BS X 38:2005 Heat curing paint scheme for aerospace purposes. Specification no current standard is superseded ISBN 0 580 45190 9 £24.00 members £48.00 non-members ACE/65/-/3
BS 6068-2.87:Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA). Method by continuous flow analysis (CFA) See BS ISO 15681-2.
SPECIALIST BOOKS FROM BSI BIP 2046:2005 Winning with health and safety for your business no current standard is superseded ISBN 0 580 44094 X £55.00 members £55.00 non-members BIP 2047:2005 Winning with fire safety for your business no current standard is superseded ISBN 0 580 44095 8 £55.00 members £55.00 non-members BIP 2049:2005 Winning with food safety for your business no current standard is superseded ISBN 0 580 44096 6 £55.00 members £55.00 non-members
BS 6651:1999 Code of practice for protection of structures against lightning AMENDMENT 1 AMD 15518 Updated standard: Please order by the reference: BS 6651:1999 £76.00 members £152.00 non-members GEL/81 Also incorporates Corrigendum 1. BS 7079:Preparation of steel substrates before application of paints and related products BS 7079:Group C:Surface roughness characteristics of blast-cleaned steel substrates BS 7079-C5:Replica tape method for the determination of the surface profile See BS ISO 8503-5. BS EN 71:Safety of toys
Page 12 of 66
BS EN 71-1:2001 Mechanical and physical properties AMENDMENT 4 AMD 15556 Updated standard: Please order by the reference: BS EN 71-1:2001 £67.00 members £134.00 non-members CW/15 Also incorporates Amendments 1, 2 & 3.
BS EN 846-4:2002 Determination of load capacity and load-deflection characteristics of straps AMENDMENT 1 AMD 15526 Updated standard: Please order by the reference: BS EN 846-4:2002 £30.00 members £60.00 non-members B/519, B/519/3
BS EN ISO 3766:2003 Construction drawings. Simplified representation of concrete reinforcement CORRIGENDUM 1 AMD 15521 Updated standard: Please order by the reference: BS EN ISO 3766:2003 £43.00 members £86.00 non-members B/555
BS EN 287:Qualification test of welders. Fusion welding
BS EN 927:Paints and varnishes. Coating materials and coating systems for exterior wood
BS EN ISO 6530:2005 Protective clothing. Protection against liquid chemicals. Test method for resistance of materials to penetration by liquids CORRIGENDUM 1 AMD 15608 Updated standard: Please order by the reference: BS EN ISO 6530:2005 £30.00 members £60.00 non-members PH/3/3
BS EN 287-1:2004 Steels CORRIGENDUM 1 AMD 15598 Updated standard: Please order by the reference: BS EN 287-1:2004 £50.00 members £100.00 non-members WEE/36 BS EN 353:Personal protective equipment against falls from a height BS EN 353-1:2002 Guided type fall arresters including a rigid anchor line AMENDMENT 1 AMD 15198 Updated standard: Please order by the reference: BS EN 353-1:2002 £24.00 members £48.00 non-members PH/5 BS EN 752:Drain and sewer systems outside buildings BS EN 752-4:1998 Hydraulic design and environmental considerations CORRIGENDUM 1 AMD 15442 Updated standard: Please order by the reference: BS EN 752-4:1998 £58.00 members £116.00 non-members B/505, B/505/22 BS EN 846:Methods of test for ancillary components for masonry
AMENDMENTS TO BRITISH STANDARDS
BS EN 927-3:2000 Natural weathering test CORRIGENDUM 1 AMD 15523 Updated standard: Please order by the reference: BS EN 927-3:2000 £43.00 members £86.00 non-members STI/28, STI/28/2 BS EN 1846:Firefighting and rescue service vehicles BS EN 1846-2:2001 Common requirements. Safety and performance AMENDMENT 1 AMD 15441 Updated standard: Please order by the reference: BS EN 1846-2:2001 £61.00 members £122.00 non-members FSH/17, FSH/17/3 BS EN 1856:Chimneys. Requirements for metal chimneys BS EN 1856-1:2003 System chimney products CORRIGENDUM 1 AMD 15584 Updated standard: Please order by the reference: BS EN 1856-1:2003 £67.00 members £134.00 non-members B/506
BS EN 12809:2001 Residential independent boilers fired by solid fuel. Nominal heat output up to 50 kW. Requirements and test methods AMENDMENT 1 AMD 15494 Updated standard: Please order by the reference: BS EN 12809:2001 £61.00 members £122.00 non-members RHE/28 BS EN 12999:2002 Cranes. Loader cranes AMENDMENT 1 AMD 15527 Updated standard: Please order by the reference: BS EN 12999:2002 £67.00 members £134.00 non-members MHE/3/5 BS EN 13520:2002 Footwear. Test methods for uppers, lining and insocks. Abrasion resistance AMENDMENT 1 AMD 15474 Updated standard: Please order by the reference: BS EN 13520:2002 £24.00 members £48.00 non-members TCI/69
Page 13 of 66
BS EN 13605:2002 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes CORRIGENDUM 1 AMD 15534 Updated standard: Please order by the reference: BS EN 13605:2002 £43.00 members £86.00 non-members NFE/34/1 BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above CORRIGENDUM 1 AMD 15597 Updated standard: Please order by the reference: BS EN 14015:2004 £96.00 members £192.00 non-members PVE/15 BS EN 14511:Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling BS EN 14511-3:2004 Test methods CORRIGENDUM 1 AMD 15535 Updated standard: Please order by the reference: BS EN 14511-3:2004 £58.00 members £116.00 non-members RHE/17 BS EN ISO 14698:Cleanrooms and associated controlled environments. Biocontamination control BS EN ISO 14698-2:2003 Evaluation and interpretation of biocontamination data TECHNICAL CORRIGENDUM 2 AMD 15552 Updated standard: Please order by the reference: BS EN ISO 14698-2:2003 £30.00 members £60.00 non-members LBI/30 Also incorporates Corrigendum 1.
BS EN ISO 15681:Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) BS EN ISO 15681-1:2004 (BS 6068-2.86:2004) Method by flow injection analysis (FIA) CORRIGENDUM 2 AMD 15596 Updated standard: Please order by the reference: BS EN ISO 15681-1:2004 £43.00 members £86.00 non-members EH/3, EH/3/2 Also incorporates Amendment 1 and Corrigendum 1. BS EN 60061:Specification for lamp caps and holders together with gauges for the control of interchangeability and safety BS EN 60061-1:1997 Lamps caps AMENDMENT 9 AMD 15488 Updated standard: Please order by the reference: BS EN 60061-1:1997 £108.00 members £216.00 non-members CPL/34/2 Also incorporates Amendment 1, 2, 3, 4, 5, 6, 7 & 8. BS EN 60335:Specification for safety of household and similar electrical appliances BS EN 60335-2:Particular requirements BS EN 60335-2-2:2003 Vacuum cleaners and water-suction cleaning appliances AMENDMENT 1 AMD 15532 Updated standard: Please order by the reference: BS EN 60335-2-2:2003 £43.00 members £86.00 non-members CPL/61
BS EN 60619:1993 Electrically operated food preparation appliances. Methods for measuring the performance AMENDMENT 2 AMD 15476 Updated standard: Please order by the reference: BS EN 60619:1993 £50.00 members £100.00 non-members CPL/59 Also incorporates Amendment 1. BS EN 60947:Specification for low-voltage switchgear and controlgear BS EN 60947-1:2004 General rules CORRIGENDUM 1 AMD 15485 Updated standard: Please order by the reference: BS EN 60947-1:2004 £89.00 members £178.00 non-members PEL/17/2 BS EN 61000:Electromagnetic compatibility (EMC) BS EN 61000-4:Testing and measurement techniques BS EN 61000-4-3:2002 Radiated, radio-frequency, electromagnetic field immunity test AMENDMENT 2 AMD 15528 Updated standard: Please order by the reference: BS EN 61000-4-3:2002 £58.00 members £116.00 non-members GEL/210/12 Also incorporates Amendment 1. BS EN 61000-4-6:1996 Immunity to conducted disturbances, induced by radio-frequency fields AMENDMENT 3 AMD 15529 Updated standard: Please order by the reference: BS EN 61000-4-6:1996 £50.00 members £100.00 non-members GEL/210/12 Also incorporates Amendments 1 & 2 and Corrigendum 1. BS EN 62094:Indicator light units for household and similar fixed-electrical installations
AMENDMENTS TO BRITISH STANDARDS
Page 14 of 66
BS EN 62094-1:2003 General requirements AMENDMENT 1 AMD 15550 Updated standard: Please order by the reference: BS EN 62094-1:2003 £61.00 members £122.00 non-members PEL/23 BS ISO 709:2001 Essential oils. Determination of ester value CORRIGENDUM 1 AMD 15557 Updated standard: Please order by the reference: BS ISO 709:2001 £24.00 members £48.00 non-members AW/54 BS ISO 8503:Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates BS ISO 8503-5:2003 (BS EN ISO 8503-5:2004, BS 7079-C5:2004) Replica tape method for the determination of the surface profile AMENDMENT 1 AMD 15516 Updated standard: Please order by the reference: BS EN ISO 8503-5:2004 £30.00 members £60.00 non-members STI/21 Renumbered as dual-numbered standard BS EN ISO 8503-5:2004, BS 7079-C5:2004. BS ISO 15681:Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)
BS ISO 15681-1:2003 (BS EN ISO 15681-1:2004, BS 6068-2.86:2004) Method by flow injection analysis (FIA) AMENDMENT 1 AMD 15545 Updated standard: Please order by the reference: BS EN ISO 15681-1:2004 £43.00 members £86.00 non-members EH/3/2 Renumbered as dual-numbered standard BS EN ISO 15681-1:2004, BS 6068-2.86:2004. Also incorporates Corrigendum 1. BS ISO 15681-2:2003 (BS EN ISO 15681-2:2004, BS 6068-2.87:2004) Method by continuous flow analysis (CFA) AMENDMENT 1 AMD 15546 Updated standard: Please order by the reference: BS EN ISO 15681-2:2004 £43.00 members £86.00 non-members EH/3, EH/3/2 Renumbered as dual-numbered standard BS EN ISO 15681-2:2004, BS 6068-2.87:2004. Also incorporates Corrigendum 1. BS ISO 19101:2002 (BS EN ISO 19101:2005) Geographic information. Reference model AMENDMENT 1 AMD 15562 Updated standard: Please order by the reference: BS EN ISO 19101:2005 £61.00 members £122.00 non-members IST/36 Renumbered as BS EN ISO 19101:2005. BS ISO 19105:2000 (BS EN ISO 19105:2005) Geographic information. Conformance and testing AMENDMENT 1 AMD 15561 Updated standard: Please order by the reference: BS EN ISO 19105:2005 £43.00 members £86.00 non-members
UPDATED BRITISH STANDARDS UPDATED BRITISH STANDARDS
BS EN 10292:2000 Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions AMENDMENT 2 Updated standard: Please order by the reference: BS EN 10292:2000 £50.00 members £100.00 non-members ISE/10 Also incorporates Amendment 1. BS EN 50262:1999 Cable glands for electrical installations AMENDMENT 2 Updated standard: Please order by the reference: BS EN 50262:1999 £43.00 members £86.00 non-members GEL/20/11/1 Also incorporates Amendment 1. BS EN 60335:Specification for safety of household and similar electrical appliances BS EN 60335-1:2002 General requirements AMENDMENT 2 Updated standard: Please order by the reference: BS EN 60335-1:2002 £82.00 members £164.00 non-members CPL/61 Also incorporates Amendment 1 and Corrigendum 1.
IST/36 Renumbered as BS EN ISO 19105:2005.
BS EN ISO 4074:2002 Natural latex rubber condoms. Requirements and test methods TECHNICAL CORRIGENDUM 1 Updated standard: Please order by the reference: BS EN ISO 4074:2002 £61.00 members £122.00 non-members CH/157 Also incorporates Corrigendum 1.
BS ISO 11784:1996 Radio-frequency identification of animals. Code structure AMENDMENT 1 Updated standard: Please order by the reference: BS ISO 11784:1996 £24.00 members £48.00 non-members AGE/6 Page 15 of 66
SPECIAL ANNOUNCEMENTS BS 3900:Methods of test for paint BS 3900:Group F:Durability tests on paint films BS 3900-F18:1998 Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle ISO 11997-1 has been updated by revising test cycle A and adding a new cycle D. This will be implemented by publishing it as new edition dual-numbered standard BS ISO 11997-1 (BS 3900-F18), entitled 'Paints and varnishes. Determination of resistance to cy Contact: Roger Tanfield Email:
[email protected] STI/10 BS 7666:Spatial data-sets for geographical referencing BS 7666-1:2000 Specification for a street gazetteer BS 7666-2:2000 Specification for a land and property gazetteer BS 7666-3:2000 Specification for addresses BS 7666-4:2002 Specification for recording public rights of way Work has started on the revision of all four parts of BS 7666. In order to obtain feedback from the wider BS 7666-user community, a BS 7666 Consultative Group has been set up by committee IST/36. Its aim is to ensure user “buy-in” to the revision by commu Contact: David Jowers Email:
[email protected] IST/36 BS EN 60896:Stationary lead-acid batteries
BS EN 60896-22:2004 Valve regulated types. Requirements This standard will be available shortly and implements verbatim EN 60896-22:2004, which is identical to IEC 60896-22:2004. Its object is to assist the specifier in the understanding of each test contained within IEC 60896-21 and to provide guidance on a s Contact: Keith Stiles Email:
[email protected] PEL/21 PD 6518:1987 Prefabricated temporary road marking materials for use at road works This published document has been superseded by BS EN 1790:1998 for white materials and by BS 7962:2000 for black materials, and will be withdrawn on 1 May 2005. Contact: Bernard Williams Email:
[email protected] B/509/2 EN 55020:2002/A2:2005 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement This CENELEC Corrigendum (see CENELEC PUBLICATIONS section in this magazine) moves the date of withdrawal of EN 55020:2002 from 1 April, 2005 to 1 December, 2005. Within BSI this Corrigendum will be incorporated in BS EN 55020:2002 at the same time as the Contact: Geraldine Salt Email:
[email protected] GEL/210/11 CEN/TS 14961 Solid biofuels. Fuel specifications and classes The ratified text for this Technical Specification will be published as BSI Draft for Development DD CEN/TS 14961. Although the project was not issued as a Draft for Public Comment, it was thoroughly reviewed by committee PTI/17. Contact: Keith Seyde Email:
[email protected] PTI/17
prEN 62323:2005 Dimensions of half pot cores made of magnetic oxides for inductive proximity switches This document's availability for comment should have been announced in December 2004. In the meantime wide consultation continues to take place with industry through the trade associations represented on BSI committee EPL/51. This Formal Vote Draft remain Contact: Committee Service Centre Email:
[email protected] EPL/51
BRITISH STANDARDS PROPOSED FOR CONFIRMATION BS 573, 574 [...]:1973 (BS 1995:1973, BS 1996:1973, BS 2535:1973, BS 2536:1973, BS 3647:1973) Specifications for plasticizer esters CII/50 BS 903:Physical testing of rubber. Methods using plastimeters BS 903-A59:Determination of the plasticity retention index (PRI) of raw natural rubber BS 903-A59.2:1997 Physical testing of rubber. Methods using plastimeters PRI/22 BS 1411:1972 Specification for printers' cards and blanks (terms and sizes) PAI/38 BS 1439:1992 Specification for single-ply wet-creped paper towelling PAI/10 BS 1460:1967 Method for determination of apparent density after compaction of precipitated calcium carbonate CII/54 BS 1808:1985 Specification for cut business forms and letterheads PAI/24
BRITISH STANDARDS PROPOSED FOR CONFIRMATION
Page 16 of 66
BS 1995, 1996:Specification for plasticizer esters See BS 573. BS 1998:1970 Specification for triphenyl phosphate
BS 3282:1969 Glossary of terms relating to gas chromatography CII/55
BS 4448:1988 Specification for school exercise books and papers PAI/25
BS 3484:Record inks
BS 4497:1969 Recommendations for the detection and estimation of nitrogenous treating agents in paper PAI/11
CII/50 BS 2474:1993 Recommendations for names for chemicals used in industry CII/3 BS 2511:1970 Methods for the determination of water (Karl Fischer method) CII/54 BS 2535, 2536:Specifications for plasticizer esters See BS 573. BS 2782:Methods of testing plastics. Thermal properties. BS 2782-1:Method 151A:1984 Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound PRI/34
BS 3484-1:1991 Specification for blue-black inks PAI/27 BS 3484-2:1994 Specification for permanent inks PAI/27 BS 3647:Specifications for plasticizer esters See BS 573. BS 3674:1981 Specification for sodium carbonate (technical grades) CII/22 BS 3947:1976 Specification for liquid chlorine CII/22 BS 3984:1982 Specification for sodium silicates CII/22
BS 4574:1970 Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink PAI/11 BS 4603:1970 Method for determination of residue on ignition or ash of chemical products CII/54 BS 4618:Recommendations for the presentation of plastics design data. Mechanical properties BS 4618-1:Creep lateral contraction ratio (Poisson's ratio)
BS 2782-2:Method 241A:1984 Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene PRI/34
BS 3993:1966 Specification for hydrochloric acid, commercial types 1 and 2 CII/22
BS 4618-1.1.3:1974 Recommendations for the presentation of plastics design data. Mechanical properties PRI/11
BS 2987:1958 Notes on the application of statistics to paper testing
BS 4130:1984 Specification for sodium hydroxide (technical grades) CII/22
BS 4618-4:Resistance to colour change produced by exposure to light
PAI/11 BS 3043:1973 Specification for storage envelopes for processed X-ray films for medical radiography PAI/33 BS 3047:1988 Specification for sizes of posters PAI/23 BS 3137:1972 Methods for determining the bursting strength of paper and board PAI/11
BS 4172:Hand-held pressurized aerosol dispensers against houseflies BS 4172-1:1999 Specification for insecticidal performance CII/49 BS 4172-2:1999 Method for determination of insecticidal performance
BS 4618-4.3:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects PRI/11 BS 4618-4.6:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects PRI/11
CII/49 BS 4264:1987 Specification for envelopes for commercial, official and professional use PAI/33
BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range CII/54 Page 17 of 66
BS 4781:1990 Specification for pressure-sensitive adhesive plastics labels for permanent use PAI/37 BS 4816:1972 Method for the determination of the puncture resistance of board PAI/11 BS 4817:1972 Method for the determination of the thickness of corrugated fibreboard PAI/11 BS 4818:1993 Method for determination of the creasing quality of carton board (Pira method) PAI/11
BS 5117-1.4:1985 Determination of foaming characteristics CII/7 BS 5117-2:Methods of test for corrosion inhibition performance
BS 5537:1991 Guide to forms design sheet and layout chart PAI/24
BS 5117-2.1:1985 General procedures CII/7
CII/7 BS 5117-2.4:1985 Static engine test CII/7
CII/7 CII/50
BS 4974:1975 Specification for water for lead-acid batteries CII/8 BS 5097:Specification for loose leaf binders BS 5097-1:1974 Ring binders with metal mechanisms PAI/30 BS 5117:Testing corrosion inhibiting, engine coolant concentrate ('antifreeze') BS 5117-1:Methods of test for determination of physical and chemical properties BS 5117-1.1:1985 Ancillary procedures CII/7 BS 5117-1.2:1985 Determination of boiling point CII/7 BS 5117-1.3:1985 Testing corrosion inhibiting, engine coolant concentrate CII/7
BS 5634:1978 Methods of test for potassium hydroxide CII/22
BS 5117-2.2:1985 Glassware tests
BS 5117-2.5:1985 Field test
BS 4835:1973 Methods of test for plasticizer esters
BS 5498:1977 Specification for the safety of hand operated paper cutting machines PAI/40
BS 5117-2.6:1992 Test for corrosion of cast aluminium alloys under heat-transfer conditions
BS 5688:Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates , sodium perborates and crude sodium borates for industrial use BS 5688-0:1986 General introduction CII/16 BS 6057:Rubber latices. Methods of test
CII/7 BS 5293:Sampling and testing carbon black for use in the rubber industry BS 5293-2:1996 Method for determination of pour density PRI/50 BS 5293-4:1996 Method for determination of pellet size distribution PRI/50 BS 5293-8:1996 Method for determination of dust content PRI/50
BS 6057-3:Methods of test BS 6057-3.5:1996 Determination of KOH number of natural rubber latices PRI/50 BS 6057-3.14:1987 Determination of high-speed mechanical stability of synthetic rubber latices PRI/50 BS 6070:Methods of sampling and test for sodium carbonate for industrial use BS 6070-0:1981 General introduction CII/20
BS 5293-12:1996 Methods for determination of surface area by surfactant adsorption PRI/50 BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas chromatography CII/55
BS 6070-7:1981 Determination of copper content CII/20 BS 6075:Methods of sampling and test for sodium hydroxide for industrial use BS 6075-0:1981 General introduction CII/20
BRITISH STANDARDS PROPOSED FOR CONFIRMATION
Page 18 of 66
BS 6075-12:1981 Determination of copper content CII/20
BS 7319:Analysis of sodium chloride for industrial use
BS 6075-14:1981 Determination of matter insoluble in water CII/20
BS 7319-12:1990 Methods for determination of anti-caking additives content of salt for food use CII/22
BS 6092:Methods of sampling and test for sodium and potassium silicates for industrial use BS 6092-0:1981 General introduction CII/20 BS 6092-10:1981 Determination of matter insoluble in water CII/20 BS 6092-11:1981 Determination of chloride content of sodium metasilicate CII/20 BS 6092-12:1981 Limit test for sulphate content of sodium metasilicate CII/20 BS 6410:1991 Methods of test for filter papers PAI/13 BS 6504:1984 Method for determination of water absorption of paper and board (Klemm method) PAI/11
BS 7402:1991 Guide to specifying electronic typographic markup (SETM) PAI/35 BS 7500:1995 Specification for marking of recycled paper board PAI/12 BS 7619:1993 Specification for extruded cellular unplasticized PVC (PVC-UE) profiles PRI/34 BS 7876:1996 Classification of prints PAI/45 BS 8100:Lattice towers and masts BS 8100-2:1986 Guide to the background and use of Part 1 'Code of practice for loading' B/525/32 BS 8100-3:1999 Code of practice for strength assessment of members of lattice towers and masts B/525/32
BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus PAI/11
BS ISO 1434:1995 Natural rubber in bales. Amount of bale coating. Determination PRI/50
BS 7010:1988 Code of practice for a system of tolerances for the dimensions of plastics mouldings PRI/82
BS ISO 1795:2000 Rubber, raw natural and raw synthetic. Sampling and further preparative procedures PRI/50
BS 7029:Method of specifying thermoplastics injection mouldings
BS ISO 4097:2000 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure PRI/50
BS 7029-1:1993 General requirements
BS ISO 5796:2000 Rubber compounding ingredients. Natural calcium carbonate. Test methods PRI/50
BRITISH STANDARDS REVIEWED AND CONFIRMED BS 691:1987 Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem) LBI/36/3 BS 1715:Analysis of soaps BS 1715-2:Quantitative test methods BS 1715-2.4:1989 Method for determination of free fatty acids content CII/34 BS 1715-2.9:1990 Method for determination of EDTA content CII/34 BS 3762:Analysis of formulated detergents. BS 3762-2:1989 Qualitative test methods CII/34 BS 3762-3:Quantitative test methods BS 3762-3.10:1989 Methods for determination of short-chain alkylbenzenesulphonates content CII/34 BS 3762-3.11:1989 Method for determination of ammonia content CII/34 BS 3762-3.25:1989 Methods for determination of water and volatile matter content CII/34 BS 3762-4:Physical test methods
PRI/82 BRITISH STANDARDS REVIEWED AND CONFIRMED
Page 19 of 66
BS 3762-4.1:1989 Method for determination of clear point of liquid detergent CII/34 BS 6985:1989 Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale) LBI/36/3 BS ISO 3160:Watch-cases and accessories. Gold alloy coverings BS ISO 3160-1:1998 General requirements STI/53 BS ISO 10713:1992 Jewellery. Gold alloy coatings STI/53 BS ISO 12819:1999 Methods of evaluation of the lifetime of a battery-powered watch STI/53
BRITISH STANDARDS DECLARED OBSOLESCENT BS 91:1998 Electric cable soldering sockets. Specification GEL/20/7 This standard has been declared obsolescent as it continues to be needed for existing equipment still in use but is no longer utilised for new designs.
BRITISH STANDARDS WITHDRAWN BS 1289:Flue blocks and masonry terminals for gas appliances BS 1289-1:1986 Specification for precast concrete flue blocks and terminals B/506 Superseded by BS EN 1858:2003 BS 2000:Methods of test for petroleum and its products
BS 2000-16:1998 Petroleum products. Determination of the freezing point of aviation fuels PTI/13 This standard has been withdrawn at the request of the national committee because it does not meet industry requirements BS 2000-323:2000 Determination of thermal oxidation stability of gas turbine fuels. JFTOT method PTI/13 This standard has been withdrawn at the request of the national committee because it does not meet industry requirements BS 2654:1989 Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry PVE/15 Superseded by BS EN 14015:2004 BS 3605:Austenitic stainless steel pipes and tubes for pressure purposes BS 3605-2:1992 Specification for longitudinally welded tubes ISE/73 Superseded by BS EN 10217-7:2005 BS 3683:Glossary of terms used in non-destructive testing. BS 3683-2:1985 Magnetic particle flaw detection WEE/46 Superseded by BS EN 1330-7:2005 BS 3934:Mechanical standardization of semiconductor devices. BS 3934-6:1992 Specification for the preparation of outline drawings of surface mounted semiconductor device packages EPL/47 Superseded by BS EN 60191-6:2004
BS 4533-102:Specification for floodlights BS 4533-102.5:1990 Luminaires. Particular requirements CPL/34 Superseded by BS EN 60598-2-5:1998 BS 4999:General requirements for rotating electrical machines. BS 4999-111:1987 Specification for built-in thermal protection for electric motors rated at 660 volts a.c. and below PEL/2 Superseded by BS EN 60034-11:2004 BS 5286:1978 Specification for aluminium framed sliding glass doors B/538 This standard has been withdrawn as it is now out of date BS 5550:Cinematography BS 5550-2:16 mm film BS 5550-2.9.1:1978 Specification for dimensions of spools for 16 mm motion-picture projectors (up to and including 120 m capacity: 18 cm size) CPW/36 Superseded by BS ISO 1793:2005 BS 5550-2.9.2:1980 Specification for spools for 16 mm motion-picture projectors (from 244 m to 610 m capacity: 24 cm to 38 cm size) CPW/36 Superseded by BS ISO 1793:2005 BS 6038:1980 Specification for high-voltage cable plug and socket connections for medical X-ray equipment CH/62/2 Superseded by BS EN 60526:2004 BS 6121:Mechanical cable glands
BS 4533:Luminaires. Particular requirements
BRITISH STANDARDS WITHDRAWN
Page 20 of 66
BS 6121-1:1989 Specification for metallic glands GEL/20 Superseded by BS 6121-1:2005 and BS EN 50262:1999 BS 6352:1983 Specification for flasks with ground glass joints LBI/36 Superseded by BS EN ISO 4797:2004 BS 6414:1983 Method for specifying characteristics of vibration and shock isolators GME/21 Superseded by BS ISO 2017-1:2005 BS 6481:1984 Method for determination of effective depth of hardening of steel after flame or induction hardening ISE/72 Superseded by BS EN 10328:2005 BS 6494:Hydraulic fluid power valve mounting surfaces BS 6494-4:1989 Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves MCE/18 This standard has been withdrawn as it is no longer in use BS 7425:Abrasive grains BS 7425-1:1991 Method for the determination of the bulk density of macrograins MTE/13 Superseded by BS ISO 9136-1:2004 BS 7435:Fibre cement flue pipes, fittings and terminals BS 7435-1:1991 Specification for light quality fibre cement flue pipes, fittings and terminals B/506 Superseded by BS EN 1857:2003
BS 7435-2:1991 Specification for heavy quality fibre cement flue pipes, fittings and terminals B/506 Superseded by BS EN 1857:2003 DD 195:Hydraulic couplings DD 195-1:1991 Method of test for coupling port threads and their seals intended for use in fluid power systems MCE/18 This standard has been withdrawn as it was never developed as a standard and has now become obsolete DD 195-2:1991 Method of test for couplings intended for use in fluid power systems MCE/18 This standard has been withdrawn as it was never developed as a standard and has now become obsolete DD 225:1995 Determination of anti-wear properties of hydraulic fluids using the oscillating pin on rotating disc method MCE/18 This standard has been withdrawn as it was never developed as a standard and has now become obsolete BS EN 368:1993 Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids PH/3 Superseded by BS EN ISO 6530:2005 BS EN 701:1995 Fibre ropes for general service. General specification TCI/68 Superseded by BS EN ISO 9554:2005 BS EN 12625:Tissue paper and tissue products BS EN 12625-6:1999 Determination of grammage PAI/10 Superseded by BS EN ISO 12625-6:2005
BS EN 12626:1997 Safety of machinery. Laser processing machines. Safety requirements EPL/76 Superseded by BS EN ISO 11553-1:2005 BS EN 20139:1992 Textiles. Standard atmospheres for conditioning and testing TCI/24 Superseded by BS EN ISO 139:2005 BS EN 20534:1993 Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board PAI/11 Superseded by BS EN ISO 534:2005 BS EN 50263:2000 Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment PEL/95 Superseded by BS EN 60255-26:2005 BS EN 50284:1999 Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G GEL/31 Superseded by BS EN 60079-26:2004 BS EN 61606:1997 Audio and audiovisual equipment. Digital audio parts. Basic methods of measurement of audio characteristics EPL/100, EPL/100/3 Superseded by Parts 1 & 2 of BS EN 61606:2004 BS ISO 15022:Securities. Scheme for messages (data field dictionary) BS ISO 15022-1:1999 Data field and message design rules and guidelines IST/12 Superseded by BS ISO 20022-1:2004 BS ISO 15022-2:1999 Maintenance of the data field dictionary and catalogue of messages IST/12 Superseded by BS ISO 20022-2:2004
BRITISH STANDARDS WITHDRAWN
Page 21 of 66
BS AU 260:Fuel injection equipment. Vocabulary
BS EN ISO 9455-3:1995 Determination of acid value, potentiometric and visual titration methods NFE/27
BS AU 260-4:1995 High-pressure pipes and end-connections
BS EN 12799:2000 Brazing. Non-destructive examination of brazed joints WEE/19
MCE/22 Superseded by BS ISO 7876-4:2004
BS EN ISO 9455-9:1996 Determination of ammonia content NFE/27
BS EN 13133:2000 Brazing. Brazer approval
TH 42140 Electrical plugs and wiring. An international survey Superseded by BIP 2074:2005
BS EN ISO 9455-10:2001 Flux efficacy test, solder spread method NFE/27/4
BS EN 13134:2000 Brazing. Procedure approval WEE/19
BS EN ISO 9455-12:1994 Steel tube corrosion test
BS EN ISO 14644:Cleanrooms and associated controlled environments
BRITISH STANDARDS UNDER REVIEW BS 2957:1958 Specification for fireman's axe with ash handle MTE/15 BS 3054:1959 Specification for fireman's axe with rubber insulated handle MTE/15 BS 6068:Water quality
NFE/27 BS EN 10020:2000 Definition and classification of grades of steel ISE/5 BS EN 10132:Cold rolled narrow steel strip for heat treatment. Technical delivery conditions BS EN 10132-1:2000 General
BS 6068-5:Biological methods BS 6068-5.28:2000 Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea) EH/3/5
ISE/31
BS ISO 7539-8:2000 Preparation and use of specimens to evaluate weldments ISE/NFE/8
BS EN 10132-2:2000 Case hardening steels
BS EN 10132-3:2000 Steels for quenching and tempering ISE/31
BS ISO 11463:1995 Corrosion of metals and alloys. Evaluation of pitting corrosion ISE/NFE/8
BS EN ISO 12224:Solder wire, solid and flux cored. Specification and test methods
BS EN ISO 9454-2:2001 Performance requirements
BS EN ISO 12224-1:1998 Classification and performance requirements MCE/14/5/1
NFE/27
BRITISH STANDARDS UNDER REVIEW
BS EN 29455-5:1993 Copper mirror test
BS ISO 7539:Corrosion of metals and alloys. Stress corrosion testing
BS EN ISO 9454:Soft soldering fluxes. Classification and requirements
BS EN ISO 9455-2:1996 Determination of non-volatile matter, ebulliometric method
BS EN 29455:Soft soldering fluxes. Test methods
ISE/31
BS EN 10132-4:2000 Spring steels and other applications
BS EN ISO 9455:Soft soldering fluxes. Test methods
BS EN ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 LBI/30
NFE/27
BS EN ISO 9400:1996 Nickel-based alloys. Determination of resistance to intergranular corrosion ISE/NFE/8
NFE/27/4
WEE/19
ISE/31
BS EN ISO 12224-2:1999 Determination of flux content NFE/27/4
BS ISO 11846:1995 Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys ISE/NFE/8 BS ISO 15324:2000 Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test ISE/NFE/8
BS EN 12797:2000 Brazing. Destructive tests of brazed joints WEE/19 Page 22 of 66
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards ISE/5
NEW WORK STARTED BS 594:Hot rolled asphalt for roads and other paved areas BS 594-2:2003/Amendment 1 Specification for transport, laying and compaction of hot rolled asphalt will supersede BS 594-2:2003 B/510/1 BS 3379 (Revision) Flexible combustion modified polyurethane cellular materials for load-bearing applications. Specification will supersede BS 3379:2003 PRI/71 BS 4987:Coated macadam (asphalt concrete) for roads and other paved areas BS 4987-2:2003/Amendment 1 Specification for transport, laying and compaction will supersede BS 4987-2:2003 B/510/1 BS 5335:Continental quilts BS 5335-2 Specification for quilts filled with feather and/or down TCI/66 BS 7369 (Revision) Multi-frequency tone signalling protocol for social alarm systems will supersede BS 7369:1991 GW/1/12 BS 8300/Amendment 1 Design of buildings and approaches to meet the needs of disabled people. Code of practice will supersede BS 8300:2001 B/209/8 BS DTD 5582 Oil resistant vulcanized silicone for aircraft ACE/25 NEW WORK STARTED
BS DTD 5583 Vulcanized fluoro-silicone rubbers for aircraft ACE/25 BS DTD 5597 Vulcanized eth-prop rubbers (fluid resistant) for aircraft ACE/25
BS EN 494:2004/Amendment 1 Fibre-cement profiled sheets and fittings. Product specification and test methods B/542/4
BS DTD 5603 Elastomeric toroidal sealing rings (O rings). Fluoro-carbon type ACE/25
BS EN 1040 (Revision) Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1) will supersede BS EN 1040:1997 CH/216
BS DTD 5605 (O rings). Oil resistant, vulcanized silicone type ACE/25
BS EN 1044 (Revision) Brazing. Filler metals will supersede BS EN 1044:1999 WEE/1
BS DTD 5606 (O rings). BD-AN mineral oil resistant
BS EN 1275 (Revision) Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1) will supersede BS EN 1275:1997 CH/216
ACE/25 BS DTD 5607 (O rings). BD-AN fuel & synthetic oil resistant ACE/25 BS DTD 5608 (O rings). Eth-prop fluid resistant ACE/25 BS DTD 5613 (O rings). O rings fluoro-carbon. Low compression ACE/25 BS DTD 5615 Vulcanized silicone rubbers (high tear strength) for aircraft ACE/25 BS DTD 5616 (O rings). Fluoro silicone type ACE/25 BS DTD 5631 Vulcanized general purpose silicone for aircraft ACE/25 BS EN ISO 433/Amendment 1 Conveyor belts. Marking PRI/67 BS EN 492:2004/Amendment 1 Fibre-cement slates and fittings. Product specification and test methods B/542/4
BS EN 1359/Amendment 1 Gas meters. Diaphragm gas meters GSE/25 BS EN ISO 1520 (Revision) Paints and varnishes. Cupping test will supersede BS EN ISO 1520:2001 STI/10 BS EN ISO 1522 (Revision) Paints and varnishes. Pendulum damping test will supersede BS EN ISO 1522:2001 STI/10 BS EN 1930 Safety barriers. Safety requirements and test methods CW/41 BS EN 1993:Eurocode 3. Design of steel structures BS EN 1993-3:Towers, masts and chimneys NA to BS EN 1993-3-1 Towers and masts B/525/32
Page 23 of 66
NA to BS EN 1993-3-2 Chimneys B/525/32 BS EN 1998:Eurocode 8. Design of structures for earthquake resistance NA to BS EN 1998-1 General rules, seismic actions and rules for buildings B/525/8 NA to BS EN 1998-2 Bridges B/525/8 NA to BS EN 1998-4 Silos, tanks and pipelines B/525/8 NA to BS EN 1998-5 Foundations, retaining structures and geotechnical aspects B/525/8 NA to BS EN 1998-6 Towers, masts and chimneys B/525/8 BS EN 1999:Eurocode 9. Design of aluminium structures NA to BS EN 1999-1-1 General rules B/525/8 NA to BS EN 1999-1-3 Fatigue B/525/8 BS EN ISO 2409 (Revision) Paints and varnishes. Cross-cut test will supersede BS EN ISO 2409:1995 STI/10 BS EN ISO 3684/Amendment 1 Conveyor belts. Determination of minimum pulley diameters PRI/67 BS EN ISO 9073:Textiles. Test methods for nonwovens BS EN ISO 9073-9 Determination of drape coefficient TCI/24
NEW WORK STARTED
BS EN ISO 9170:Terminal units for medical gas pipeline systems BS EN ISO 9170-1 Terminal units for use with compressed medical gases and vacuum will supersede BS EN 737-1:1998 CH/121/6 BS EN ISO 9170-2 Terminal units for anaesthetic gas scavenging systems will supersede BS EN 737-4:1998 CH/121/6 BS EN ISO 10247/Amendment 1 Conveyor belts. Characteristics of covers. Classification PRI/67 BS EN ISO 10414:Petroleum and natural gas industries. Field-testing of drillings fluids BS EN ISO 10414-2 Oil-based fluids will supersede BS ISO 10414-2:2002 PSE/17/-/3 BS EN 12186/Amendment 1 Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements GSE/33 BS EN 12279/Amendment 1 Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements GSE/33 BS EN 12467:2004/Amendment 1 Fibre-cement flat sheets. Product specification and test methods B/542/4 BS EN 12697:Bituminous mixtures. Test methods for hot mix asphalt BS EN 12697-11 (Revision) Determination of the affinity between aggregate and bitumen will supersede BS EN 12697-11:2003 B/510/1
BS EN 13032-1/Amendment 1 Measurement and file format CPL/34/5 BS EN 13779 Ventilation for non-residential buildings. Performance requirements for ventilation systems RHE/2 BS EN ISO 15002 Flow-metering devices for connection to terminal units of medical gas pipeline systems will supersede BS EN 13220:1999 CH/121/6 BS EN 15151 Mountaineering. Descenders. Safety requirements and test methods SW/136/4 BS EN 15162 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws MCE/3/15 BS EN 15164 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain and belt slotting machines MCE/3/15 BS EN ISO 23936:Petroleum and natural gas industries. Non-metallic materials in contact with media related to oil and gas production BS EN ISO 23936-1 Thermoplastics PSE/17 BS EN 61196:Radio-frequency cables BS EN 61196-1 Generic specification. General, definitions and requirements EPL/46 BS EN 61753:Fibre optic interconnecting devices and passive components. Performance standard
BS EN 13032:Light and lighting. Measurement and presentation of photometric data of lamps and luminaries Page 24 of 66
BS EN 61753-023:2005 Grade C/3 single-mode fibre optic connectors for category C. Controlled environment GEL/86/2 BS EN 00138119 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measurement equipment WEE/46 BS EN XXX (TC 156 WI00156058) Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems RHE/2 BS EN XXX (TC 156 WI00156077) Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration RHE/2 BS EN XXX (TC 156 WI00156078) Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in commercial buildings RHE/2 BS EN XXX (TC 156 WI00156098) Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of air-conditioning systems RHE/2 BS EN XXX (TC 156 WI00156099) Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems RHE/2 BS EN XXX (TC 156 WI00156100) Criteria for the indoor environment including thermal, indoor air quality (ventilation), light and noise RHE/2 BS ISO 281 Rolling bearings. Dynamic load ratings and life MCE/7 BS ISO 2281 Horology. Water-resistant watches STI/53 NEW WORK STARTED
BS ISO 4360 Liquid flow measurement in open channels by weirs and flumes. Triangular profile weirs will supersede BS 3680-4B:1986 CPI/113/2 BS ISO 4395:Fluid power systems and components. Cylinder piston thread dimensions and types BS ISO 4395-1 Hydraulic fluids MCE/18/-/3 BS ISO 4395-2 Pneumatic fluids MCE/18/-/3
BS ISO 8434-2 (Revision) 37 degree flared connectors will supersede BS ISO 8434-2:1994 MCE/18/-/4 BS ISO 10703 Water quality. Determination of the activity concentration of radionuclides. Method by high-resolution gamma-ray spectrometry EH/3 BS ISO 12215:Small craft. Hull construction. Scantlings BS ISO 12215-7 Multihulls GME/33
BS ISO 6020:Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series BS ISO 6020-1 (Revision) Medium series will supersede BS ISO 6020-1:1998 MCE/18/-/3 BS ISO 7764 Iron ores. Preparation of pre-dried test samples for chemical analysis will supersede BS 7020-1:1988 ISE/58 BS ISO 7789 (Revision) Hydraulic fluid power. Two, three and four-port screw-in cartridge valves will supersede BS ISO 7789:1998 MCE/18/-/5 BS ISO 8116:Textile machinery and accessories. Beams for winding BS ISO 8116-5 Sectional beams for warp knitting machines TCI/33 BS ISO 8426 Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity will supersede BS 7250:1989 MCE/18/-/8 BS ISO 8434:Metallic tube connections for fluid power use
BS ISO 13726 (Revision) Hydraulic fluid power. Single rod cylinders, 16MPa compact series with bores from 250mm to 500mm. Accessory mounting dimensions will supersede BS ISO 13726:1998 MCE/18/-/3 BS ISO 15086:Hydraulic fluid power. Determination of the fluid-borne noise characteristics of compressors and systems BS ISO 15086-3 Measurement of hydraulic impedance MCE/18/-/8 BS ISO 15917 Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials. Dimensions MTE/5 BS ISO/IEC 15938:Information technology. Multimedia content description interface BS ISO/IEC 15938-4 Audio. High-level descriptors IST/37 BS ISO 16253 Watch-cases and accessories. Vapour phase deposited coatings STI/53 BS ISO 16734 Fire safety engineering. Requirements governing algebraic formulas. Fire plumes FSH/24 Page 25 of 66
BS ISO 16736 Fire safety engineering. Requirements governing algebraic formulas. Ceiling jet flows FSH/24 BS ISO 16737 Fire safety engineering. Requirements governing algebraic formulas. Vent flows FSH/24 BS ISO 16889 (Revision) Hydraulic fluid power filters. Multi-pass method for filtration performance of a filter element will supersede BS ISO 16889:1999 MCE/18/-/6 BS ISO 17165:Hydraulic fluid power. Hose assemblies
BS ISO 20860-1 Dimensions and electrical requirements AUE/9 BS ISO/IEC 21000:Information technology. Multimedia framework (MPEG-21) BS ISO/IEC 21000-17 Fragment identification for MPEG media types IST/37 BS ISO 21016 Office furniture. Tables and desks. Test methods for the determination of stability, strength and durability FW/0 BS ISO 21485 Draw frame for cotton spinning. Terms, definitions and components TCI/33
BS ISO 17165-2 Recommended practices for hydraulic hoses MCE/18/-/4 BS ISO 18692 Fibre ropes for offshore station keeping. Polyester TCI/77 BS ISO 19012:Optics and optical instruments. Microscopes. Designation of microscope objectives BS ISO 19012-1 Flatness of field / plan LBI/33 BS ISO 19973:Pneumatic fluid power. Determination of reliability by testing
BS ISO 22037 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials. Dimensions MTE/5 BS ISO 22727 Graphical symbols. Creation and design of public information symbols. Requirements PH/8/2
MCE/18 BS ISO 20032 Method for evaluation of tensile properties of metallic superplastic materials ISE/NFE/4/1 BS ISO 20860:Road vehicles. 50 ohms impedance radio frequency interface (50 ohms RFI)
BS IEC 61156-6:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz BS IEC 61156-6-1 Work area wiring. Blank detail specification EPL/46 BS IEC 61967:Integrated circuits. Measurement of electromagnetic emissions 150 kHz to 1 GHz BS IEC 61967-6/Amendment 1 Measurement of conducted emissions. Magnetic Probe method will supersede BS EN 61967-6:2002 EPL/47 BS IEC 62153:Metallic communication cable test methods BS IEC 62153-4:Electromagnetic compatibility (EMC)
BS IEC 61156:Multicore and symmetrical pair/quad cables for digital communications
BS IEC 62153-4-8 Capacitive coupling admittance EPL/46
BS IEC 61156-3:Work area wiring
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
BS IEC 61156-3-1 Blank detail specification EPL/46
BS ISO 19973-4 Pressure regulators
BS IEC 61156-6 Symmetrical pair/quad cables with transmission characteristics up to 600 MHz. Work area wiring. Sectional specification EPL/46
BS IEC 61156-5 Symmetrical pair/quad cables with transmission characteristics up to 600 MHz. Horizontal floor wiring EPL/46 BS IEC 61156-5:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz
05/19975833 DC BS ISO 16001 Earth-moving machinery. Hazard detection systems and visual aids. Performance requirements and tests B/513/1 05/19985903 DC BS ISO 13404 Prosthetics and orthotics. Categorization and description of external orthoses and orthotic components CH/168
BS IEC 61156-5-1 Horizontal floor wiring. Blank detail specification. EPL/46
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
Page 26 of 66
05/19988483 DC BS ISO 1833 Textiles. Quantitative chemical analysis. Part 1. General principles of testing TCI/80 05/19993827 DC BS EN 3120 Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems. 4mm
