BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

22 downloads 807 Views 190KB Size Report
BS EN 12810-2:2003. Particular methods of structural design no current standard is superseded. ISBN 0 580 43909 7. £40.00 members. £80.00 non-members.

BS 2738-3:2004

BS 6068-2.90:-

BS 476:-

Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses supersedes BS 2738-3:1991 ISBN 0 580 43900 3

Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS See BS ISO 18073.

Fire tests on building materials and structures

£22.00 members £44.00 non-members

BRITISH STANDARDS

CH/172

BS 6068-4:Microbiological methods

BS 476-3:2004 Classification and method of test for external fire exposure to roofs supersedes BS 476-3:1975 ISBN 0 580 43794 9

BS 3900:Methods of test for paints

BS 6068-4.19:-

£28.00 members £56.00 non-members

BS 3900-E13:Falling-weight test

Criteria for establishing equivalence between microbiological methods See BS EN ISO 17994.

FSH/22, FSH/22/8

See BS EN ISO 6272-1.

BS 598:-

BS 3900-J14:-

BS 6068-6:Sampling

Sampling and examination of bituminous mixtures for roads and other paved areas

Testing of coating powders. Terminology See BS EN ISO 8130-14.

BS 6068-6.19:-

BS 598-112:2004

Guidance on sampling in marine sediments See BS EN ISO 5667-19.

BS 4248:2004 Supersulfated cement

Method for the use of road surface hardness probe no current standard is superseded ISBN 0 580 43922 4

supersedes BS 4248:1974 ISBN 0 580 43910 0 £22.00 members £44.00 non-members

£22.00 members £44.00 non-members

BS 8412:2004

B/516, B/516/6

B/510, B/510/2 BS 5867:-

BS 1339:Humidity

Specification for fabrics for curtains and drapes

BS 5867-1:2004 General requirements

Guide to the measurement of humidity no current standard is superseded ISBN 0 580 43424 9

BS 8433:2004

supersedes BS 5867-1:1980 ISBN 0 580 43901 1 £22.00 members £44.00 non-members

£47.00 members £94.00 non-members

TCI/71

CPI/29

Methods of test for petroleum and its products

Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products See BS EN 13358.

BS 2738:Spectacle lenses

Microwavable personal warmers. Specification no current standard is superseded ISBN 0 580 43923 2 £22.00 members £44.00 non-members

PRI/68

BS 6068:Water quality

BS 6068-2:BS 2000-525:-

£22.00 members £44.00 non-members

AGE/15

BS 1339-3:2004

BS 2000:-

Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification no current standard is superseded ISBN 0 580 43814 7

Physical, chemical and biochemical methods

BS EN PUBLICATIONS

BS 6068-2.28:-

BS EN 215:2004

Determination of phosphorus. Ammonium molybdate spectrometric method See BS EN ISO 6878.

Thermostatic radiator valves. Requirements and test methods supersedes BS EN 215-1:1991 and BS 7556:1992 ISBN 0 580 43981 X £47.00 members £94.00 non-members

RHE/16

Page 1 of 53

BS EN ISO 389:-

BS EN 878:2004

BS EN 1492-4:2004

Acoustics. Reference zero for the calibration of audiometric equipment

Chemicals used for treatment of water intended for human consumption. Aluminium sulfate supersedes BS EN 878:1997 ISBN 0 580 43983 6

Lifting slings for general service made from natural and man-made fibre ropes supersedes BS 6668-1:1986 ISBN 0 580 43920 8

BS EN ISO 389-8:2004

£40.00 members £80.00 non-members

£47.00 members £94.00 non-members

Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones no current standard is superseded ISBN 0 580 43854 6

CII/59

BS EN 957:Stationary training equipment

£28.00 members £56.00 non-members

BS EN ISO 1628:Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers

EH/1, EH/1/1 BS EN 957-9:2003 Elliptical trainers, additional specific safety requirements and test methods no current standard is superseded ISBN 0 580 43930 5

BS EN 403:2004 Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking supersedes BS EN 403:1993 ISBN 0 580 43863 5

BS EN ISO 1628-3:2003 Polyethylenes and polypropylenes

£28.00 members £56.00 non-members

SW/136/4

£47.00 members £94.00 non-members

PH/4, PH/4/4

BS EN 572:-

Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete

BS EN 1639:2004

BS EN 1062-1:2004 Classification

£28.00 members £56.00 non-members

Dentistry. Medical devices for dentistry. Instruments supersedes BS EN 1639:1997 ISBN 0 580 43915 1

CH/106, CH/106/4

supersedes BS EN 1062-1:1997 ISBN 0 580 43938 0 £28.00 members £56.00 non-members

no current standard is superseded ISBN 0 580 43919 4

BS EN 1640:2004

STI/28

£40.00 members £80.00 non-members BS EN 1279:-

Dentistry. Medical devices for dentistry. Equipment supersedes BS EN 1640:1997 ISBN 0 580 43916 X

Glass in building. Insulating glass units

£28.00 members £56.00 non-members

B/520, B/520/1

BS EN 703:2004 Agricultural machinery. Silage loading, mixing and/or chopping and distributing machines. Safety supersedes BS EN 703:1996 ISBN 0 580 43862 7

supersedes BS EN ISO 1628-3:2000 ISBN 0 580 43912 7 £28.00 members £56.00 non-members PRI/82

BS EN 1062:-

Glass in building. Basic soda lime silicate glass products

BS EN 572-8:2004 Supplied and final cut sizes

MHE/15

CH/106, CH/106/6

BS EN 1279-1:2004

£47.00 members £94.00 non-members

AGE/32

BS EN 764:Pressure equipment

Generalities, dimensional tolerances and rules for the system description no current standard is superseded ISBN 0 580 43944 5

BS EN 1641:2004

£40.00 members £80.00 non-members

£22.00 members £44.00 non-members

Dentistry. Medical devices for dentistry. Materials supersedes BS EN 1641:1997 ISBN 0 580 43917 8

CH/106, CH/106/2

B/520, B/520/2

BS EN 1492:Textile slings. Safety

BS EN 764-1:2004 Terminology. Pressure, temperature, volume, nominal size supersedes BS EN 764:1995 ISBN 0 580 43935 6

BS EN 1642:2004 Dentistry. Medical devices for dentistry. Dental implants supersedes BS EN 1642:1997 ISBN 0 580 43918 6 £22.00 members £44.00 non-members

£28.00 members £56.00 non-members

CH/106, CH/106/8 PVE/1

Page 2 of 53

BS EN 1762:2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification supersedes BS EN 1762:1998 ISBN 0 580 43410 9

BS EN ISO 8130-14:2004 (BS 3900-J14:2004) Terminology

BS EN ISO 6272-1:2004 (BS 3900-E13:2004)

no current standard is superseded ISBN 0 580 43855 4 £22.00 members £44.00 non-members

Falling-weight test, large-area indenter supersedes BS EN ISO 6272:1994 ISBN 0 580 43856 2

STI/10

£28.00 members £56.00 non-members

£28.00 members £56.00 non-members

STI/10

PRI/66

BS EN ISO 5356:-

BS EN ISO 6360:-

Anaesthetic and respiratory equipment. Conical connectors

Dentistry. Number coding system for rotary instruments

BS EN ISO 8835-5:2004 Anaesthesia ventilators

supersedes BS EN 740:1999 which remains current ISBN 0 580 43853 8 £40.00 members £80.00 non-members CH/121, CH/121/1

BS EN ISO 6360-4:2004

BS EN ISO 5356-1:2004 Cones and sockets

supersedes BS EN 1281-1:1997 ISBN 0 580 43872 4 £40.00 members £80.00 non-members CH/121, CH/121/1

Specific characteristics of diamond instruments no current standard is superseded ISBN 0 580 43992 5 £22.00 members £44.00 non-members

BS EN ISO 8871:-

CH/106, CH/106/4 BS EN ISO 5534:2004 Cheese and processed cheese. Determination of the total solids content (Reference method) supersedes BS 770-10:1986 ISBN 0 580 43871 6

BS EN ISO 6360-6:2004

£28.00 members £56.00 non-members

£28.00 members £56.00 non-members

Specific characteristics of abrasive instruments no current standard is superseded ISBN 0 580 43993 3

Dried milk. Determination of moisture content (reference method) no current standard is superseded ISBN 0 580 43933 X

CH/212

Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method supersedes BS EN 1189:1997 ISBN 0 580 43933 X

£28.00 members £56.00 non-members

AW/5

BS EN 10168:2004 Steel products. Inspection documents. List of information and description no current standard is superseded ISBN 0 580 43982 8

£40.00 members £80.00 non-members

EH/3, EH/3/2 BS EN ISO 5667:Water quality. Sampling

ISE/5

Guidance on sampling in marine sediments no current standard is superseded ISBN 0 580 43945 3 £40.00 members £80.00 non-members

EH/3, EH/3/6

Paints and varnishes. Rapid-deformation (impact resistance) tests

£28.00 members £56.00 non-members

BS EN ISO 7142:2004

BS EN ISO 5667-19:2004 (BS 6068-6.19:2004)

BS EN ISO 6272:-

Determination of released-particle count partially supersedes BS EN ISO 8871:1997 which remains current ISBN 0 580 43870 8 £28.00 members £56.00 non-members

BS EN ISO 6878:2004 (BS 6068-2.28:2004)

BS EN ISO 5537:2004

Elastomeric parts for parenterals and for devices for pharmaceuticals use

BS EN ISO 8871-3:2004

CH/106, CH/106/4

AW/5

BS EN ISO 8835:Inhalational anaesthesia systems

Binders for paints and varnishes. Epoxy resins. General methods of test no current standard is superseded ISBN 0 580 43852 X

BS EN ISO 10427:Petroleum and natural gas industries. Equipment for well cementing

£22.00 members £44.00 non-members

STI/3

BS EN ISO 8130:Coating powders

BS EN ISO 10427-2:2004 Centralizer placement and stop-collar testing no current standard is superseded ISBN 0 580 43858 9 £40.00 members £80.00 non-members

PSE/17, PSE/17/-/3

Page 3 of 53

BS EN ISO 11337:2004

BS EN 13130-1:2004

Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography no current standard is superseded ISBN 0 580 43874 0 £40.00 members £80.00 non-members

PRI/21

BS EN 12810-1:2003 Products specifications

supersedes BS 1139-5:1990 ISBN 0 580 43908 9 £40.00 members £80.00 non-members B/514, B/514/21

£57.00 members £114.00 non-members

BS EN 12196:2003

BS EN 12810-2:2003

Gymnastic equipment. Horses and bucks. Functional and safety requirements, test methods supersedes BS EN 12196:1997 ISBN 0 580 43899 6

Particular methods of structural design no current standard is superseded ISBN 0 580 43909 7

CW/47, CW/47/1

BS EN 13130-2:2004

£40.00 members £80.00 non-members

£28.00 members £56.00 non-members

B/514, B/514/21 SW/14

Determination of terephthalic acid in food simulants supersedes DD ENV 13130-2:1999 ISBN 0 580 43932 1 £28.00 members £56.00 non-members

BS EN 12811:Temporary works equipment

BS EN 12312:-

Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants supersedes DD ENV 13130-1:1999 ISBN 0 580 43931 3

CW/47, CW/47/1

Aircraft ground support equipment. Specific requirements

BS EN 12312-6:2004 De-icers and de-icing/anti-icing equipment no current standard is superseded ISBN 0 580 43861 9 £47.00 members £94.00 non-members

BS EN 12811-1:2003

BS EN 13130-3:2004

Scaffolds. Performance requirements and general design supersedes BS 5973:1993 ISBN 0 580 43279 3

Determination of acrylonitrile in food and food simulants supersedes DD ENV 13130-3:1999 ISBN 0 580 43948 8

£57.00 members £114.00 non-members

£28.00 members £56.00 non-members

CW/47, CW/47/1

B/514, B/514/21 ACE/57

BS EN 12560:Flanges and their joints. Gaskets for class-designated flanges

BS EN 12952:-

BS EN 13130-4:2004

Water-tube boilers and auxiliary installations

Determination of 1,3-butadiene in plastics supersedes DD ENV 13130-4:1999 ISBN 0 580 43947 X

BS EN 12952-14:2004

£28.00 members £56.00 non-members

Covered metal jacketed gaskets for use with steel flanges no current standard is superseded ISBN 0 580 43936 4

Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution no current standard is superseded ISBN 0 580 43979 8

£28.00 members £56.00 non-members

£40.00 members £80.00 non-members

BS EN 12560-7:2004

PSE/2

PVE/2

CW/47, CW/47/1

BS EN 13130-5:2004 Determination of vinylidene chloride in food simulants supersedes DD ENV 13130-5:1999 ISBN 0 580 43946 1 £28.00 members £56.00 non-members

BS EN 12697:-

BS EN 13120:2004

Bituminous mixtures. Test methods for hot mix asphalt

Internal blinds. Performance requirements including safety no current standard is superseded ISBN 0 580 43864 3

BS EN 12697-17:2004 Particle loss of porous asphalt specimen no current standard is superseded ISBN 0 580 43996 8 £22.00 members £44.00 non-members

CW/47, CW/47/1

£40.00 members £80.00 non-members

B/538, B/538/3

Determination of vinylidene chloride in plastics supersedes DD ENV 13130-6:1999 ISBN 0 580 43968 2 £28.00 members £56.00 non-members

BS EN 13130:-

B/510, B/510/1

BS EN 13130-6:2004

CW/47, CW/47/1

Materials and articles in contact with foodstuffs. Plastics substances subject to limitation

BS EN 12810:Facade scaffolds made of prefabricated components Page 4 of 53

BS EN 13130-7:2004 Determination of monoethylene glycol and diethylene glycol in food simulants supersedes DD ENV 13130-7:1999 ISBN 0 580 43967 4 £28.00 members £56.00 non-members

CW/47, CW/47/1

BS EN ISO 13897:2004 Dentistry. Amalgam capsules BS EN 13675:2004

no current standard is superseded ISBN 0 580 43857 0 £28.00 members £56.00 non-members CH/106, CH/106/6

Safety of machinery. Safety requirements for tube forming and rolling mills and their finishing line equipment no current standard is superseded ISBN 0 580 43980 1

BS EN 13965:-

£57.00 members £114.00 non-members BS EN 13130-8:2004

MCE/23

Determination of isocyanates in plastics supersedes DD ENV 13130-8:1999 ISBN 0 580 43969 0 £40.00 members £80.00 non-members

CW/47, CW/47/1

BS EN 13358:2004 (BS 2000-525:2004)

Characterization of waste. Terminology

BS EN 13746:2004

BS EN 13965-1:2004

Surfaces for sports areas. Determination of dimensional changes due to the effect of varied water, frost and heat conditions no current standard is superseded ISBN 0 580 43997 6

Material related terms and definitions no current standard is superseded ISBN 0 580 43940 2 £47.00 members £94.00 non-members

B/508, B/508/3

£22.00 members £44.00 non-members

PRI/57

Methods of test for petroleum and its products. BS 2000-525. Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products no current standard is superseded ISBN 0 580 43860 0

BS EN 13965-2:2004 Management related terms and definitions no current standard is superseded ISBN 0 580 43939 9

BS EN 13748:Terrazzo tiles

£47.00 members £94.00 non-members

BS EN 13748-1:2004 Terrazzo tiles for internal use

£14.40 members £19.20 non-members

PTI/13

BS EN 13561:2004

B/508, B/508/3

supersedes BS 4131:1973 and BS 4357:1968 ISBN 0 580 43898 8 £47.00 members £94.00 non-members

BS EN 14058:2004

B/524

External blinds. Performance requirements including safety no current standard is superseded ISBN 0 580 43865 1

BS EN ISO 13790:2004

£54.00 members £108.00 non-members

B/538, B/538/3

BS EN 13586:2004 Cranes. Access

Thermal performance of buildings. Calculation of energy use for space heating no current standard is superseded ISBN 0 580 43985 2 £57.00 members £114.00 non-members

no current standard is superseded ISBN 0 580 43921 6 £40.00 members £80.00 non-members MHE/3, MHE/3/11

B/540, B/540/1

BS EN 13892:Methods of test for screed materials

Protective clothing. Garments for protection against cool environments no current standard is superseded ISBN 0 580 43943 7 £28.00 members £56.00 non-members

PH/3, PH/3/1

BS EN 14216:2004 Cement. Composition, specifications and conformity criteria for very low heat special cements no current standard is superseded ISBN 0 580 43897 X £40.00 members £80.00 non-members

B/516, B/516/6 BS EN 13617:Petrol filling stations

BS EN 13892-3:2004 Determination of wear resistance-Boehme no current standard is superseded ISBN 0 580 43896 1

BS EN 13617-1:2004

£22.00 members £44.00 non-members

Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units supersedes BS 7117-1:1991 which remains current ISBN 0 580 43907 0

B/507, B/507/6

BS EN 14299:2004 Non-active surgical implants. Particular requirements for cardiac and vascular implants. Specific requirements for arterial stents no current standard is superseded ISBN 0 580 43859 7 £47.00 members £94.00 non-members

CH/150, CH/150/2

£57.00 members £114.00 non-members

PVE/21 Page 5 of 53

BS EN ISO 14327:2004

BS EN 14608:2004

BS EN ISO 15614-1:2004

Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding no current standard is superseded ISBN 0 580 43911 9

Windows. Determination of the resistance to racking no current standard is superseded ISBN 0 580 43941 0

Arc and gas welding of steels and arc welding of nickel and nickel alloys supersedes BS EN 288-3:1992 ISBN 0 580 43975 5

£22.00 members £44.00 non-members

B/538, B/538/1

£28.00 members £56.00 non-members

£47.00 members £94.00 non-members

WEE/36 WEE/29 BS EN 14609:2004 BS EN ISO 15749:-

Windows. Determination of the resistance to static torsion no current standard is superseded ISBN 0 580 43942 9

BS EN 14329:2004 Inland navigation vessels. Installation of berths and loading areas no current standard is superseded ISBN 0 580 43867 8

Ships and marine technology. Drainage systems on ships and marine structures

£22.00 members £44.00 non-members

B/538, B/538/1

£28.00 members £56.00 non-members

SME/32, SME/32/7

BS EN ISO 15749-1:2004 Sanitary drainage-system design

no current standard is superseded ISBN 0 580 43903 8 £40.00 members £80.00 non-members SME/32, SME/32/3

BS EN ISO 15236:Steel cord conveyor belts

BS EN 14456:2004 BS EN ISO 15236-2:2004 Preferred belt types

Products used for treatment of water intended for human consumption. Bone charcoal no current standard is superseded ISBN 0 580 43984 4

BS EN ISO 15749-2:2004

no current standard is superseded ISBN 0 580 43978 X £22.00 members £44.00 non-members

£28.00 members £56.00 non-members

PRI/67

CII/59

£28.00 members £56.00 non-members

BS EN 14469:-

BS EN ISO 15236-4:2004 Vulcanized belt joints

Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P)

no current standard is superseded ISBN 0 580 43977 1

SME/32, SME/32/3

BS EN ISO 15749-3:2004

£22.00 members £44.00 non-members

PRI/67

BS EN 14469-1:2004 Composition and preparation of basic mixtures no current standard is superseded ISBN 0 580 43866 X

STI/1

SME/32, SME/32/3

supersedes BS EN 1066:1998 ISBN 0 580 43895 3 £28.00 members £56.00 non-members

BS EN ISO 15749-5:2004

PRI/52 BS EN 14521:2004 Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer no current standard is superseded ISBN 0 580 43937 2

Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test supersedes BS EN 288-8:1995 ISBN 0 580 43986 0

PRI/60

Drainage of decks, cargo spaces and swimming pools no current standard is superseded ISBN 0 580 43906 2 £28.00 members £56.00 non-members

BS EN ISO 15613:2004

£22.00 members £44.00 non-members

Sanitary drainage, drain piping for vacuum system no current standard is superseded ISBN 0 580 43905 4 £40.00 members £80.00 non-members

BS EN ISO 15605:2004 Adhesives. Sampling

£22.00 members £44.00 non-members

Sanitary drainage, drain piping for gravity system no current standard is superseded ISBN 0 580 43904 6

SME/32, SME/32/3

BS EN ISO 15874:Plastics piping systems for hot and cold water installations. Polypropylene (PP)

£22.00 members £44.00 non-members

WEE/36

BS EN ISO 15614:Specification and qualification of welding procedures for metallic materials. Welding procedure test

BS EN ISO 15874-1:2003 General

no current standard is superseded ISBN 0 580 43882 1 £28.00 members £56.00 non-members

PRI/88, PRI/88/2 Page 6 of 53

BS EN ISO 15877-3:2003 Fittings BS EN ISO 15874-2:2003 Pipes

BS EN ISO 15876:-

no current standard is superseded ISBN 0 580 43881 3 £40.00 members £80.00 non-members PRI/88, PRI/88/2

BS EN ISO 15874-3:2003 Fittings

no current standard is superseded ISBN 0 580 43880 5 £40.00 members £80.00 non-members PRI/88, PRI/88/2

BS EN ISO 15874-5:2003 Fitness for purpose of the system

no current standard is superseded ISBN 0 580 43877 5 £28.00 members £56.00 non-members PRI/88, PRI/88/2

Plastics piping systems for hot and cold water installations. Polybutylene (PB)

BS EN ISO 15876-1:2003 General

no current standard is superseded ISBN 0 580 43887 2 £28.00 members £56.00 non-members PRI/88, PRI/88/2

BS EN ISO 15876-2:2003 Pipes

no current standard is superseded ISBN 0 580 43888 0 £28.00 members £56.00 non-members PRI/88, PRI/88/2

no current standard is superseded ISBN 0 580 43893 7 £40.00 members £80.00 non-members PRI/88, PRI/88/2

BS EN ISO 15877-5:2003 Fitness for purpose of the system

no current standard is superseded ISBN 0 580 43894 5 £28.00 members £56.00 non-members PRI/88, PRI/88/2

BS EN ISO 17994:2004 (BS 6068-4.19:2004) Water quality. Criteria for establishing equivalence between microbiological methods no current standard is superseded ISBN 0 580 43873 2 £40.00 members £80.00 non-members

BS EN ISO 15876-3:2003 Fittings

EH/3, EH/3/4

no current standard is superseded ISBN 0 580 43889 9

BS EN ISO 15875:-

BS EN ISO 21549:-

Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)

£28.00 members £56.00 non-members

BS EN ISO 15875-1:2003 General

BS EN ISO 15876-5:2003 Fitness for purpose of the system

BS EN ISO 21549-1:2004 General structure

no current standard is superseded ISBN 0 580 43883 X

no current standard is superseded ISBN 0 580 43890 2

no current standard is superseded ISBN 0 580 43835 X

£28.00 members £56.00 non-members

£28.00 members £56.00 non-members

£22.00 members £44.00 non-members

PRI/88, PRI/88/2

PRI/88, PRI/88/2

BS EN ISO 15875-2:2003 Pipes

IST/35

PRI/88, PRI/88/2

BS EN ISO 15877:-

no current standard is superseded ISBN 0 580 43884 8 £28.00 members £56.00 non-members PRI/88, PRI/88/2

Health informatics. Patient healthcard data

Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C)

BS EN ISO 21549-2:2004 Common objects

no current standard is superseded ISBN 0 580 43831 7 £40.00 members £80.00 non-members IST/35

BS EN ISO 15877-1:2003 General BS EN ISO 15875-3:2003 Fittings

no current standard is superseded ISBN 0 580 43885 6 £28.00 members £56.00 non-members

no current standard is superseded ISBN 0 580 43891 0 £28.00 members £56.00 non-members PRI/88, PRI/88/2

BS EN ISO 21549-3:2004 Limited clinical data

no current standard is superseded ISBN 0 580 43834 1 £28.00 members £56.00 non-members

IST/35

PRI/88, PRI/88/2 BS EN ISO 15877-2:2003 Pipes BS EN ISO 15875-5:2003 Fitness for purpose of the system

no current standard is superseded ISBN 0 580 43886 4 £28.00 members £56.00 non-members PRI/88, PRI/88/2

no current standard is superseded ISBN 0 580 43892 9 £28.00 members £56.00 non-members PRI/88, PRI/88/2

BS EN 60286:Packaging of components for automatic handling

Page 7 of 53

BS EN 60286-5:2004 Matrix trays

BS EN 60998-2-2:2004 BS EN 60749-34:2004 Power cycling

supersedes BS EN 60286-5:1997 ISBN 0 580 43914 3 £40.00 members £80.00 non-members EPL/40X

no current standard is superseded ISBN 0 580 43974 7 £22.00 members £44.00 non-members EPL/47, EPL/47/1

BS EN 60300:Dependability management

Particular requirements for connecting devices as separate entities with screwless-type clamping units supersedes BS EN 60998-2-2:1994 which remains current ISBN 0 580 43848 1 £40.00 members £80.00 non-members

PEL/23, PEL/23/2 BS EN 60947:Specification for low-voltage switchgear and controlgear

BS EN 60300-2:2004 Guidelines for dependability management supersedes BS 5760-1:1996 ISBN 0 580 43878 3

BS EN 60947-5:Control circuit devices and switching elements

£57.00 members £114.00 non-members

DS/1 BS EN 60947-5-1:2004 Electromechanical control circuit devices supersedes BS EN 60947-5-1:1998 which remains current ISBN 0 580 43950 X

BS EN 60300-3:Application guide

Maintenance and maintenance support supersedes BS 6548-4:1993 ISBN 0 580 43879 1

Particular requirements for connecting devices as separate entities with insulation-piercing clamping units supersedes BS EN 60998-2-3:1994 which remains current ISBN 0 580 43851 1 £40.00 members £80.00 non-members

PEL/23, PEL/23/2

BS EN 61076:Connectors for electronic equipment

£63.00 members £126.00 non-members

BS EN 60300-3-14:2004

BS EN 60998-2-3:2004

PEL/17, PEL/17/2

£54.00 members £108.00 non-members

DS/1

BS EN 60749:Semiconductor devices. Mechanical and climatic test methods

BS EN 60749-23:2004 High temperature operating life

no current standard is superseded ISBN 0 580 43971 2 £22.00 members £44.00 non-members EPL/47, EPL/47/1

BS EN 60749-24:2004 Accelerated moisture resistance. Unbiased HAST no current standard is superseded ISBN 0 580 43972 0 £22.00 members £44.00 non-members

EPL/47, EPL/47/1

BS EN 60998:-

BS EN 61076-2:Circular connectors

Connecting devices for low-voltage circuits for household and similar purposes

BS EN 61076-2-103:2004

BS EN 60998-1:2004 General requirements

Detail specification for a range of multipole connectors (type 'XLR') no current standard is superseded ISBN 0 580 43847 3

supersedes BS EN 60998-1:1993 which remains current ISBN 0 580 43846 5 £40.00 members £80.00 non-members

PEL/23, PEL/23/2

£47.00 members £94.00 non-members

EPL/48, EPL/48/2

BS EN 61386:Conduit systems for cable management

BS EN 60998-2-1:2004 Particular requirements for connecting devices as separate entities with screw-type clamping units supersedes BS EN 60998-2-1:1993 which remains current ISBN 0 580 43850 3 £40.00 members £80.00 non-members

BS EN 61386-1:2004 General requirements

supersedes BS EN 50086-1:1994 which remains current ISBN 0 580 43798 1 £47.00 members £94.00 non-members PEL/213

PEL/23, PEL/23/2 BS EN 61400:Wind turbine generator systems

BS EN 60749-33:2004 Accelerated moisture resistance. Unbiased autoclave no current standard is superseded ISBN 0 580 43973 9 £22.00 members £44.00 non-members

EPL/47, EPL/47/1 Page 8 of 53

BS EN 61400-1:2004 Safety requirements BS EN 61968:-

supersedes DD ENV 61400-1:1995 which remains current ISBN 0 580 43810 4 £57.00 members £114.00 non-members

BS ISO 844:2004

Application integration at electric utilities. System interfaces for distribution management

Rigid cellular plastics. Determination of compression properties supersedes BS ISO 844:2001 ISBN 0 580 43957 7

PEL/88 BS EN 61968-3:2004 Interface for network operations BS EN 61496:-

£28.00 members £56.00 non-members

no current standard is superseded ISBN 0 580 43927 5 £47.00 members £94.00 non-members

Safety of machinery. Electro-sensitive protective equipment.

PRI/24

PEL/57

BS ISO 1268:Fibre-reinforced plastics. Methods of producing test plates

BS EN 61496-1:2004 General requirements and tests

BS EN 62005:-

supersedes BS EN 61496-1:1998 ISBN 0 580 43830 9 £57.00 members £114.00 non-members

Reliability of fibre optic interconnecting devices and passive optical components

GEL/44 BS EN 62005-7:2004 Life stress modeling BS EN 61747:-

no current standard is superseded ISBN 0 580 43964 X

Liquid crystal and solid-state display devices

£22.00 members £44.00 non-members

GEL/86, GEL/86/3 BS EN 61747-6:2004 Measuring methods for liquid crystal modules. Transmissive type no current standard is superseded ISBN 0 580 43925 9 £47.00 members £94.00 non-members

BS ISO 1268-8:2004 Compression moulding of SMC and BMC no current standard is superseded ISBN 0 580 43836 8 £28.00 members £56.00 non-members

PRI/42

BS ISO 3045:2004 Oil of bay [$7IPimenta racemosa$7R (Mill.) J.W. Moore] no current standard is superseded ISBN 0 580 43840 6

BS ENs IMPLEMENTED BY AMENDMENT

£22.00 members £44.00 non-members

BS EN ISO 3715:-

BS ISO 3858:2004

Ships and marine technology. Propulsion plants for ships

Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract supersedes BS 5293-14:1991 and BS 5293-15:1991 ISBN 0 580 43875 9

AW/54

EPL/47

BS EN 61850:Communication networks and systems in substations

BS EN ISO 3715-2:2002 (BS ISO 3715-2:2001)

BS EN 61850-6:2004 Configuration description language for communication in electrical substations related to IEDs no current standard is superseded ISBN 0 580 43928 3 £80.00 members £160.00 non-members

PEL/57

Vocabulary for controllable-pitch propeller plants SME/32, SME/32/3 Implementation of European standard EN ISO 3715-2 by amendment to BS ISO 3715-2:2001.

BS EN ISO 15001:2004 (BS ISO 15001:2003) Anaesthetic and respiratory equipment. Compatibility with oxygen CH/121, CH/121/6 Implementation of European standard EN ISO 15001 by amendment to BS ISO 15001:2003.

BS EN 61850-9:Specific communication service mapping (SCSM)

BS EN 61850-9-2:2004 Sampled values over ISO/IEC 8802-3 no current standard is superseded ISBN 0 580 43849 X £47.00 members £94.00 non-members

£22.00 members £44.00 non-members

PRI/50

BS ISO 4718:2004 Oil of lemongrass [$7ICymbopogon flexuosus$7R (Nees ex Steudel) J.F. Watson] no current standard is superseded ISBN 0 580 43841 4 £22.00 members £44.00 non-members

AW/54

BS IMPLEMENTATIONS PEL/57 Page 9 of 53

BS ISO 4724:2004

BS ISO/IEC 14496-8:2004

Oil of cedarwood, Virginian type ($7IJuniperus virginiana$7R L.) no current standard is superseded ISBN 0 580 43989 5

Carriage of ISO/IEC 14496 contents over IP networks no current standard is superseded ISBN 0 580 43843 0

BS ISO 11783-6:2004 Virtual terminal

£22.00 members £44.00 non-members

AW/54

no current standard is superseded ISBN 0 580 43988 7 £80.00 members £160.00 non-members

£28.00 members £56.00 non-members

IST/37 AGE/31

BS ISO 6489:-

BS ISO/IEC 14662:2004 BS ISO 12611:2004

Agricultural vehicles. Mechanical connections between towed and towing vehicles

Cinematography. Audio head tones for use in international exchange of 35 mm analogue magnetic film masters. Specifications and location supersedes BS ISO 12611:1997 ISBN 0 580 43991 7

BS ISO 6489-3:2004 Tractor drawbar

no current standard is superseded ISBN 0 580 43924 0 £22.00 members £44.00 non-members

£22.00 members £44.00 non-members

Information technology. Open-edi reference model supersedes BS ISO/IEC 14662:1997 ISBN 0 580 43844 9 £54.00 members £108.00 non-members

IST/40

BS ISO/IEC 15444:-

CPW/36 AGE/6

Information technology. JPEG 2000 image coding system

BS ISO 13372:2004 BS ISO 8573:Compressed air for general use

BS ISO/IEC 15444-2:2004 Extensions

Condition monitoring and diagnostics of machines. Vocabulary no current standard is superseded ISBN 0 580 43876 7

BS ISO 8573-8:2004

no current standard is superseded ISBN 0 580 43976 3 £98.00 members £196.00 non-members

£28.00 members £56.00 non-members

Test methods for solid particle content by mass concentration no current standard is superseded ISBN 0 580 43960 7

IST/37 GME/21, GME/21/7 BS ISO 15902:2004

£28.00 members £56.00 non-members

BS ISO 13887:2004

MCE/8

BS ISO 8573-9:2004 Test methods for liquid water content no current standard is superseded ISBN 0 580 43961 5

Optics and photonics. Diffractive optics. Vocabulary no current standard is superseded ISBN 0 580 43829 5

Cold-reduced steel sheet of higher yield strength with improved formability no current standard is superseded ISBN 0 580 43869 4

£40.00 members £80.00 non-members

CPW/172

£28.00 members £56.00 non-members

ISE/10 BS ISO 16772:2004

£28.00 members £56.00 non-members

MCE/8

Soil quality. Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry no current standard is superseded ISBN 0 580 43956 9

BS ISO/IEC 13888:IT security techniques. Non-repudiation

BS ISO 10110:Optics and optical instruments. Preparation of drawings for optical elements and systems

BS ISO/IEC 13888-1:2004 General

supersedes BS ISO/IEC 13888-1:1997 ISBN 0 580 43958 5 BS ISO 10110-17:2004 Laser irradiation damage threshold

£40.00 members £80.00 non-members

IST/133

no current standard is superseded ISBN 0 580 43828 7 £22.00 members £44.00 non-members

BS ISO/IEC 14496:-

CPW/172

BS ISO 11783:Tractors and machinery for agriculture and forestry. Serial control and communications data network

Information technology. Coding of audio-visual objects

£28.00 members £56.00 non-members

EH/4, EH/4/3

BS ISO 18054:2004 Oils of orris rhizome ($7IIris pallida$7R Lam. or $7IIris germanica$7R L.). Determination of irone content. Method using gas chromatography on a capillary column no current standard is superseded ISBN 0 580 43837 6 £28.00 members £56.00 non-members

AW/54 Page 10 of 53

BS ISO 22090:-

DRAFTS FOR DEVELOPMENT

Ships and marine technology. Transmitting heading devices (THDs)

BS ISO 18055:Photography and imaging. Inkjet media. Classification, nomenclature and dimensions

BS ISO 18055-1:2004 Photo-grade media (paper and film)

no current standard is superseded ISBN 0 580 43990 9 £40.00 members £80.00 non-members

BS ISO 22090-2:2004 Geomagnetic principles

DD CEN/TS 14796:2004 Health informatics. Data types

no current standard is superseded ISBN 0 580 43902 X £28.00 members £56.00 non-members

no current standard is superseded ISBN 0 580 43949 6 £40.00 members £80.00 non-members IST/35

EPL/80 CPW/42

DD IEC TS 60695:Fire hazard testing

BS ISO 22972:2004 Essential oils. Analysis by gas chromatography on chiral capillary columns. General method no current standard is superseded ISBN 0 580 43839 2

BS ISO 18073:2004 (BS 6068-2.90:2004) Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS no current standard is superseded ISBN 0 580 43868 6

DD IEC TS 60695-11:Test flames

£22.00 members £44.00 non-members

AW/54

500 W flames. Apparatus and confirmational test methods no current standard is superseded ISBN 0 580 43966 6

£57.00 members £114.00 non-members

EH/3, EH/3/2

DD IEC TS 60695-11-3:2004

PUBLISHED DOCUMENTS

£28.00 members £56.00 non-members

BS ISO 18593:2004

GEL/89

Microbiology of food and animal feeding stuffs. Horizontal methods for sampling techniques from surfaces using contact plates and swabs no current standard is superseded ISBN 0 580 43959 3

PD 6682:Aggregates

DD IEC TS 60695-11-4:2004 50 W flame. Apparatus and confirmational test method no current standard is superseded ISBN 0 580 43965 8

PD 6682-8:2004

£28.00 members £56.00 non-members

AW/9

BS ISO 19739:2004 Natural gas. Determination of sulfur compounds using gas chromatography supersedes BS 3156-11.4.1:1994, BS 3156-11.4.2:1994 and BS 3156-11.4.4:1994 ISBN 0 580 43913 5 £57.00 members £114.00 non-members

PTI/15

Aggregates for railway ballast. Guidance on the use of BS EN 13450 no current standard is superseded ISBN 0 580 43656 X

£22.00 members £44.00 non-members

GEL/89

£28.00 members £56.00 non-members

DD CLC/TS 61482:-

PD CR 13686:2001

Live working. Flame-resistant materials for clothing for thermal protection of workers. Thermal hazards of an electric arc

Packaging. Optimization of energy recovery from packaging waste no current standard is superseded ISBN 0 580 43781 7

DD CLC/TS 61482-1:2003 Test methods

B/502, B/502/4

£40.00 members £80.00 non-members

PKW/4 BS ISO/IEC 21000:Information technology. Multimedia framework (MPEG-21)

BS ISO/IEC 21000-6:2004 Rights data dictionary

no current standard is superseded ISBN 0 580 43842 2 £88.00 members £176.00 non-members

no current standard is superseded ISBN 0 580 43929 1 £28.00 members £56.00 non-members PEL/78

PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards no current standard is superseded ISBN 0 580 43963 1 £63.00 members £126.00 non-members

MCE/3 IST/37

Page 11 of 53

DD IEC TS 62370:2004

BS EN 1071-2:2002

BS EN ISO 14937:2001

Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatibility requirements and test procedures no current standard is superseded ISBN 0 580 43962 3

Determination of coating thickness by the crater grinding method CORRIGENDUM 1 AMD 15227

Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices CORRIGENDUM 2 AMD 15195

Updated standard: Please order by the reference: BS EN 1071-2:2002 £28.00 members £56.00 non-members

£15.00 members £30.00 non-members

RPI/13 EPL/29 BS EN 1708:Welding. Basic weld joint details in steel

AMENDMENTS TO BRITISH STANDARDS

Updated standard: Please order by the reference: BS EN ISO 14937:2001 £57.00 members £114.00 non-members CH/198 Also incorporates Corrigendum 1.

BS EN 1708-1:1999 Pressurized components

BS EN 50182:2001

AMENDMENT 1 AMD 14952 BS 7505:1995

Conductors for overhead lines. Round wire concentric lay stranded conductors CORRIGENDUM 1 AMD 15179

Updated standard: Please order by the reference: BS EN 1708-1:1999 £57.00 members £114.00 non-members

Specification for the elastic properties of flat, non-adhesive, extensible fabric bandages CORRIGENDUM 1 AMD 15189

WEE/-/1

Updated standard: Please order by the reference: BS 7505:1995 £15.00 members £30.00 non-members

Updated standard: Please order by the reference: BS EN 50182:2001 £63.00 members £126.00 non-members GEL/7

BS EN 1947:2002

TCI/24

BS EN 136:1998

Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles CORRIGENDUM 1 AMD 15218

Updated standard: Please order by the reference: BS EN 1947:2002 £47.00 members £94.00 non-members FSH/17, FSH/17/6 Also incorporates Amendment 1.

Respiratory protective devices. Full face masks. Requirements, testing, marking CORRIGENDUM 1 AMD 14996

Updated standard: Please order by the reference: BS EN 136:1998 £40.00 members £80.00 non-members

BS EN 12941:1999

PH/4

BS EN 671:Fixed fire fighting systems. Hose systems

BS EN 671-2:2001 Hose systems with lay-flat hose AMENDMENT 1 AMD 15015

Updated standard: Please order by the reference: BS EN 671-2:2001 £40.00 members £80.00 non-members FSH/18, FSH/18/11

Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking AMENDMENT 1 AMD 14955

Updated standard: Please order by the reference: BS EN 12941:1999 £47.00 members £94.00 non-members PH/4, PH/4/8

BS EN 55025:2003 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement CORRIGENDUM 1 AMD 15199

Updated standard: Please order by the reference: BS EN 55025:2003 £57.00 members £114.00 non-members GEL/210, GEL/210/11

BS EN 60079:Electrical apparatus for explosive gas atmospheres

BS EN 60079-18:2004 Construction, test and marking of type of protection encapsulation "m" electrical apparatus CORRIGENDUM 2 AMD 15208

Updated standard: Please order by the reference: BS EN 60079-18:2004 £47.00 members £94.00 non-members GEL/31

BS EN 1071:-

Also incorporates Corrigendum 1.

Advanced technical ceramics. Methods of test for ceramic coatings

BS EN 60309:Plugs, socket-outlets and couplers for industrial purposes

Page 12 of 53

BS EN 60309-1:1999 General requirements

BS EN 61029-2-11:2003

BS ISO 15001:2003 (BS EN ISO 15001:2004)

Particular requirements for combined mitre and bench saws CORRIGENDUM 1 AMD 15196

AMENDMENT 1 AMD 15217

Updated standard: Please order by the reference: BS EN 60309-1:1999 £63.00 members £126.00 non-members PEL/23/4

Updated standard: Please order by the reference: BS EN 61029-2-11:2003 £54.00 members £108.00 non-members CPL/61, CPL/61/6

BS EN 60749:Semiconductor devices. Mechanical and climatic test methods

BS EN 61131:Programmable controllers

BS EN 60749-16:2003

BS EN 61131-2:2003 Equipment requirements and tests

Particle impact noise detection (PIND) CORRIGENDUM 1 AMD 15224

CORRIGENDUM 1 AMD 15180

Updated standard: Please order by the reference: BS EN 61131-2:2003 £69.00 members £138.00 non-members GEL/65, GEL/65/2

Updated standard: Please order by the reference: BS EN 60749-16:2003 £22.00 members £44.00 non-members EPL/47

Anaesthetic and respiratory equipment. Compatibility with oxygen AMENDMENT 1 AMD 15145

Updated standard: Please order by the reference: BS EN ISO 15001:2004 £54.00 members £108.00 non-members CH/121, CH/121/6 Renumbered as BS EN ISO 15001:2004.

UPDATED BRITISH STANDARDS

BS 598:Sampling and examination of bituminous mixtures for roads and other paved areas

BS ISO 3715:BS EN 60749-17:2003 Neutron irradiation

Ships and marine technology. Propulsion plants for ships

BS 598-102:2003 Analytical test methods

CORRIGENDUM 1 AMD 15223

AMENDMENT 1

Updated standard: Please order by the reference: BS EN 60749-17:2003 £22.00 members £44.00 non-members

BS ISO 3715-2:2001 (BS EN ISO 3715-2:2002)

EPL/47

Updated standard: Please order by the reference: BS EN ISO 3715-2:2002 £28.00 members £56.00 non-members SME/32, SME/32/3 Renumbered as BS EN ISO 3715-2:2002.

BS EN 60749-18:2003 Ionizing radiation (total dose) CORRIGENDUM 2 AMD 15225

Updated standard: Please order by the reference: BS EN 60749-18:2003 £28.00 members £56.00 non-members EPL/47 Also incorporates Corrigendum 1.

BS ISO 10791-6:1998

CORRIGENDUM 1 AMD 15226

Updated standard: Please order by the reference: BS EN 60749-29:2003 £40.00 members £80.00 non-members EPL/47

BS 5911:Precast concrete pipes, fittings and ancillary products

BS 5911-1:2002 Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) AMENDMENT 1

BS ISO 10791:Test conditions for machining centres

BS EN 60749-29:2003 Latch-up test

BS EN 61029:-

Vocabulary for controllable-pitch propeller plants AMENDMENT 1 AMD 15200

Updated standard: Please order by the reference: BS 598-102:2003 £47.00 members £94.00 non-members B/510, B/510/1

Updated standard: Please order by the reference: BS 5911-1:2002 £40.00 members £80.00 non-members

Accuracy of feeds, speeds and interpolations TECHNICAL CORRIGENDUM 1 AMD 15147 Updated standard: Please order by the reference: BS ISO 10791-6:1998 £28.00 members £56.00 non-members

B/505

MTE/1

Safety of transportable motor-operated tools

Page 13 of 53

BS EN 1885:1998

BS EN 60335-2-80:2003 Particular requirements for fans

Feather and down. Terms and definitions AMENDMENT 1

BS EN 14603

AMENDMENT 1

Updated standard: Please order by the reference: BS EN 60335-2-80:2003 £28.00 members £56.00 non-members CPL/61, CPL/61/01

Updated standard: Please order by the reference: BS EN 1885:1998 £28.00 members £56.00 non-members TCI/73

BS EN 60439:BS EN 13167:2001 Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification AMENDMENT 1

Updated standard: Please order by the reference: BS EN 13167:2001 £40.00 members £80.00 non-members B/540, B/540/6

BS EN 13168:2001 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification AMENDMENT 1

Updated standard: Please order by the reference: BS EN 13168:2001 £40.00 members £80.00 non-members B/540, B/540/4

BS EN 13169:2001 Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification AMENDMENT 1

Updated standard: Please order by the reference: BS EN 13169:2001 £47.00 members £94.00 non-members B/540, B/540/6

Specification for low-voltage switchgear and controlgear assemblies

Specification for safety of household and similar electrical appliances

BS EN 60335-2-41:2003 Particular requirements for pumps AMENDMENT 1

Updated standard: Please order by the reference: BS EN 60335-2-41:2003 £28.00 members £56.00 non-members CPL/61/01

This standard, which will be available soon, implements verbatim EN 14603:2004. David Keech [email protected] ISTIECCT/-

EN 60598:Luminaires

BS EN 60439-1:1999 Type-tested and partially type-tested assemblies AMENDMENT 1

EN 60598-2-20:1997/A2:2004

Updated standard: Please order by the reference: BS EN 60439-1:1999 £69.00 members £138.00 non-members PEL/17/2, PEL/17/3

BS EN 61326:1998 Electrical equipment for measurement, control and laboratory use. EMC requirements AMENDMENT 3

Updated standard: Please order by the reference: BS EN 61326:1998 £40.00 members £80.00 non-members GEL/65, GEL/65/1 Also incorporates Amendments 1 and 2.

Particular requirements. Lighting chains

The above amendment was published by CENELEC in April 2004. It adopts the text of IEC 60598-2-20:1996/A2:2002 but with agreed CENELEC common modifications. The draft was issued by BSI in 1999 as Draft for Public Comment 99/240871 DC, and the amendment wil Geraldine Salt [email protected] CPL/34/4

CISPR 16:Specification for radio disturbance and immunity measuring apparatus and methods

CISPR 16-4:Uncertainties, statistics and limit modelling

SPECIAL ANNOUNCEMENTS CISPR 16-4-3:2004 Statistical considerations in the determination of EMC compliance of mass-produced products

BS 7916:1998 BS EN 60335:-

Information technology. Alphanumeric glyph image set for optical character recognition OCR-B. Shapes and dimensions of the printed image

Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes

This second edition is a technical revision and has been published by IEC/CISPR as a Technical Report, cancelling and replacing the edition published in 2003. The draft for this revision was issued by BSI as Draft for Public Comment 01/200779. The new edi Geraldine Salt [email protected] GEL/210/12

This standard has been withdrawn as it had become a conflicting National Standard under the CEN/CENELEC standstill agreement, and is replaced in part by DD ENV 12782. This latter publication does not however contain any of the guidance in Clause 10 of BS Nyomee Kyaw [email protected] B/541

BRITISH STANDARDS PROPOSED FOR CONFIRMATION Page 14 of 53

BS 6356:Spraying equipment for crop protection

BS EN 12890:2000

BS 2000-36:-

Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores ISE/NFE/9

Determination of flash and fire points. Cleveland open cup method See BS EN ISO 2592.

BS 2000-47:BS 6356-4:1989

BS EN 12892:2000

Specification for performance limits for field spraying nozzles AGE/15

Founding. Equipment for the production of lost patterns for the lost foam casting process ISE/NFE/9

BS 2000-49:Bitumen and bituminous binders. Determination of needle penetration See BS EN 1426.

BS EN 1371:Founding. Liquid penetrant inspection

Bitumen and bituminous binders. Determination of solubility See BS EN 12592.

CP 143:Code of practice for sheet roof and wall coverings

BS 2000-53:-

BS EN 1371-2:1998 Investment castings

Crude petroleum and fuel oils. Determination of sediment. Extraction method See BS EN ISO 3735.

CP 143-10:1973

ISE/NFE/9

Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units

BS EN 1559:-

B/542

Founding. Technical conditions of delivery

BS 2000-58:-

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS EN 1559-5:1998 Additional requirements for magnesium alloy castings

ISE/NFE/9

BS 2000-61:1999 Determination of sulfur. High pressure combustion method

BS 2000:BS EN 12421:1998 Magnesium and magnesium alloys. Unalloyed magnesium NFE/35, NFE/35/4

Methods of test for petroleum and its products

PTI/13

BS 2000-69:-

BS 2000-0:General introduction

Petroleum products. Determination of vapour pressure. Reid method See BS ISO 3007.

BS EN 12438:1998 Magnesium and magnesium alloys. Magnesium alloys for cast anodes NFE/35, NFE/35/4

BS 2000-0.1:1999 Specifications. IP Standard thermometers

BS 2000-74:2000

PTI/13 BS EN 12454:1998 Founding. Visual examination of surface discontinuities. Steel sand castings ISE/NFE/9

Bitumen and bituminous binders. Determination of softening point. Ring and ball method See BS EN 1427.

BS 2000-4:Determination of ash

Petroleum products and bituminous materials. Determination of water. Distillation method PTI/13

See BS ISO 6245.

BS 2000-80:-

BS EN 12513:2000

BS 2000-19:2002

Founding. Abrasion resistant cast irons

Determination of demulsibility characteristics of lubricating oil

Bitumen and bituminous binders. Determination of Fraass breaking point See BS EN 12593.

ISE/35

PTI/13 BS 2000-91:-

BS EN 12883:2000

BS 2000-34:2002

Founding. Equipment for the production of lost patterns for the lost wax casting process ISE/NFE/9

Determination of flash point. Pensky-Martens closed cup method PTI/13

Bitumen and bituminous binders. Determination of residue on sieving of bitumen emulsions and determination of storage stability by sieving See BS EN 1429.

Page 15 of 53

BS 2000-112:2002

BS 2000-336:-

Determination of corrosiveness to copper of lubricating grease. Copper strip method

Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry See BS EN ISO 8754.

BS 2000-272:2000

PTI/13

Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method

BS 2000-121:2002

PTI/13

Determination of oil separation from lubricating grease. Pressure filtration method

Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method

BS 2000-274:1999

PTI/13

PTI/13

Petroleum products. Aviation and distillate fuels. Determination of electrical conductivity

BS 2000-123:-

PTI/13

Petroleum products. Determination of distillation characteristics at atmospheric pressure See BS EN ISO 3405.

Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability

PTI/13

BS 2000-136:-

PTI/13

PTI/13

Bitumen and bituminous binders. Determination of water content in bitumen emulsions. Azeotropic distillation method See BS EN 1428.

BS 2000-375:1999 Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration PTI/13

BS 2000-138:2000 BS 2000-292:-

Determination of oxidation stability of aviation fuel. Potential residue method

PTI/13

BS 2000-356:1999 Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method

BS 2000-291:-

BS 2000-136.2:1999 Potentiometric titration method

BS 2000-355:Estimation of net specific energy of aviation turbine fuels using hydrogen content data See BS ISO 15911.

BS 2000-280:1999

Determination of saponification number

BS 2000-342:2000

Bitumen and bituminous binders. Determination of particle polarity of bitumen emulsions See BS EN 1430.

BS 2000-143:2001

BS 2000-386:1999 Crude petroleum. Determination of water. Coulometric Karl Fischer titration method

BS 2000-306:1994

Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products

PTI/13

Determination of oxidation stability of straight mineral oil

PTI/13

PTI/13

BS 2000-146:2000

BS 2000-313:2001

Determination of foaming characteristics of lubricating oils

Determination of air release of lubricating and hydraulic oils

BS 2000-394:Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) See BS EN 13016-1.

PTI/13

PTI/13

BS 2000-409:BS 2000-154:-

BS 2000-319:-

Petroleum products. Corrosiveness to copper. Copper strip test See BS EN ISO 2160.

Bitumen and bituminous binders. Determination of kinematic viscosity See BS EN 12595.

BS 2000-222:Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary See BS EN 12596.

Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40$0DC and 100$0DC See BS EN 13016-2.

BS 2000-425:BS 2000-323:2000 Determination of thermal oxidation stability of gas turbine fuels. JFTOT method PTI/13

Liquid petroleum products. Unleaded petrol. Determination of benzene content by gas chromatography See BS EN 12177.

BS 2000-226:Petroleum products. Calculation of viscosity index from kinematic viscosity See BS ISO 2909. Page 16 of 53

BS 2000-432:Liquefied petroleum gases. Calculation method for density and vapour pressure See BS EN ISO 8973.

BS 2000-455:2000

BS 2000-462:-

Determination of manganese in gasoline. Atomic absorption spectrometry (AAS) method

Petroleum products and used oils. Determination of PCBs and related products. Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) See BS EN 12766-1.

PTI/13 BS 2000-433:Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry See BS EN ISO 14597.

BS 2000-456:2000 Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method

PTI/13 BS 2000-438:BS 2000-457:-

Petroleum products. Determination of content. Coulometric Karl Fischer titration method See BS EN ISO 12937.

Bitumen and bituminous binders. Characterization of perceptible properties See BS EN 1425.

BS 2000-462.2:Petroleum products and used oils. Determination of PCBs and related products. Calculation of polychlorinated biphenyl (PCB) content See BS EN 12766-2.

BS 2000-464:-

BS 2000-439:BS 2000-458:-

Petroleum products. Determination of water. Potentiometric Karl Fischer titration method See BS ISO 6296.

Bitumen and bituminous binders. Determination of recovered binder and oil distillate from bitumen emulsions by distillation See BS EN 1431.

Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method See BS EN 241.

BS 2000-447:BS 2000-465:-

Liquid petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry. See BS EN ISO 14596.

BS 2000-459:Bitumen and bituminous binders. Determination of the paraffin wax content

BS 2000-459.1:Method by distillation

BS 2000-448:Determination of the filterability of lubricating oils

See BS EN 12606-1.

BS 2000-460:-

BS 2000-448.2:1999 Procedure for dry oils

PTI/13

Bitumen and bituminous binders. Determination of the resistance to hardening under the influence of heat and air

Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method See BS EN 13131.

BS 2000-466:Liquid petroleum products. Unleaded petrol. Determination or organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching See BS EN 13132.

BS 2000-449:BS 2000-477:-

Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method See BS EN 12634.

BS 2000-460.1:RTFOT method

See BS EN 12607-1.

BS 2000-460.2:TFOT method

BS 2000-450:2000

See BS EN 12607-2.

Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method

PTI/13

BS 2000-460.3:RFT method

See BS EN 12607-3. BS 2000-454:2000 Determination of phosphorus in gasoline. Spectrophotometric method

BS 2000-461:-

PTI/13

Bitumen and bituminous binders. Preparation of test samples See BS EN 12594.

Liquefied petroleum gases. Method of sampling See BS EN ISO 4257.

BS 2000-484:Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method See BS EN 12846.

BS 2000-485:Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions See BS EN 12847.

Page 17 of 53

BS 2000-486:Bitumen and bituminous binders. Determination of mixing stability with cement of bitumen emulsions See BS EN 12848.

BS 4361-20:1990 BS 2000-504:Bitumen and bituminous binders. Determination of staining tendency of bitumens See BS EN 13301.

BS 2000-488:Bitumen and bituminous binders. Determination of the pH value of bitumen emulsions See BS EN 12850.

BS 2000-489:Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) See BS EN 13723.

Specification for double-end tenoning machines

BS 2000-505:-

MTE/23

Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus See BS EN 13302.

BS 4361-23:1990 Nomenclature for narrow belt sanding machines with sliding table or frame MTE/23

BS 2000-506:Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens See BS EN 13303.

BS 2000-492:Determination of flash point. Closed cup equilibrium method See BS EN ISO 1523.

Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation See BS EN 13074.

Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS) See BS EN 14274.

BS 4361-25:1990 Nomenclature for universal tool and cutter sharpeners MTE/23

BS 2000-509:-

BS 4361-26:1990

Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers See BS EN 14275.

Nomenclature for bandsaw blade sharpening machines

MTE/23

BS 4894:1993

Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method See BS EN 14077.

Bitumen and bituminous binders. Determination of breaking behaviour See BS EN 13075-1.

Specification for binding and identification sleeves for use on electric cables and wires

GEL/15

FME/6

BS 5252:1976

BS 5252F:1976 Colour matching fan

STI/14 BS 4361:Woodworking machines

BS 5350:Methods of test for adhesives

BS 2000-495:Bitumen and bituminous binders. Determination of breaking behaviour See BS EN 13075-2.

Specification for bifurcated rivets for general purpose use (metric series)

Framework for colour co-ordination for building purposes STI/14

BS 3858:1992 BS 2000-494:-

Nomenclature for multi-spindle boring machines

MTE/23

BS 2000-510:BS 2000-493:-

BS 4361-24:1990

BS 2000-508:-

BS 2000-491:Determination of flash/no flash. Closed cup equilibrium method See BS EN ISO 1516.

MTE/23

BS 4361-22:1990

BS 2000-487:Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions See BS EN 12849.

Specification for single blade circular sawing machines with travelling table

BS 4361-0:1990 Classification of woodworking machines and auxiliary machines used for woodworking

BS 5350:Group B:Adhesives

MTE/23 BS 2000-502:Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens See BS EN 13357.

BS 5350-B9:1984 Determination of resistance to sagging (flow after application)

PRI/52

Page 18 of 53

BS EN 241:2000 (BS 2000-464:2001) BS 5350:Group H:-

BS EN 1431:2000 (BS 2000-458:2000)

Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method

Physical tests on hot-melt adhesives

BS 5350-H1:1981

PTI/13

Determination of heat stability of hot melt adhesives in the application equipment

PRI/52

BS 5350-H2:1982 Determination of low temperature flexibility or cold crack temperature PRI/52

BS 5350-H3:1984

BS EN 1425:2000 (BS 2000-457:2000) Methods of test for petroleum and its products. Bitumen and bituminous binders. Characterization of perceptible properties

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of recovered binder and oil distillate from bitumen emulsions by distillation PTI/13

BS EN ISO 1516:2002 (BS 2000-491:2002)

PTI/13

Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method PTI/13

BS EN 1426:2000 (BS 2000-49:2000)

Determination of heat resistance of hot-melt adhesives

PRI/52

BS EN ISO 1523:2002 (BS 2000-492:2002)

Methods of tests for petroleum and its products. Bitumen and bituminous binders. Determination of needle penetration

BS 5350-H4:1984

PTI/13

Determination of maximum open time of hot-melt adhesives (oven method)

PRI/52

BS EN 1427:2000 (BS 2000-58:2000) BS EN ISO 2160:1998 (BS 2000-154:1999)

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of softening point. Ring and ball method

BS 7805:Swaged collar grooved rivets

Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method PTI/13

Petroleum products. Corrosiveness to copper. Copper strip test PTI/13

PTI/13 BS 7805-1:1995 Specification for sizes up to and including 10 mm diameter

FME/6

BS EN 1428:2000 (BS 2000-291:2000)

FME/6

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of water content in bitumen emulsions. Azeotropic distillation method

BS 7805-2:1997 Specification for sizes from 12.7 mm up to and including 34.9 mm

BS EN ISO 2592:2001 (BS 2000-36:2002) Determination of flash and fire points. Cleveland open cup method PTI/13

BS EN ISO 3405:2000 (BS 2000-123:2001)

PTI/13 BS 7855:Metric rivets for the attachment of friction linings

BS EN 1429:2000 (BS 2000-91:2000)

BS 7855-1:1996 Specification for semi-tubular rivets

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of residue on sieving of bitumen emulsions and determination of storage stability by sieving

FME/6

Methods of test for petroleum and its products. Petroleum products. Determination of distillation characteristics at atmospheric pressure

PTI/13

BS EN ISO 3735:1999 (BS 2000-53:1999)

PTI/13 DD 248:1999

Crude petroleum and fuel oils. Determination of sediment. Extraction method

PTI/13

Determination of the hot storage stability of modified bitumen binders

BS EN 1430:2000 (BS 2000-292:2000)

PTI/13

BS EN ISO 4257:2001 (BS 2000-477:2001)

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of particle polarity of bitumen emulsions

Methods of test for petroleum and its products. Liquefied petroleum gases. Method of sampling

PTI/13

PTI/13 Page 19 of 53

BS EN ISO 8754:2003 (BS 2000-336:2003) Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry PTI/13

BS EN ISO 8973:1999 (BS 2000-432:1999)

BS EN 12596:2000 (BS 2000-222:2000)

BS EN 12766-1:2000 (BS 2000-462:2001)

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary

Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)

PTI/13 PTI/13 BS EN 12766-2:2001 (BS 2000-462.2:2001)

BS EN 12606:Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content

Liquefied petroleum gases. Calculation method for density and vapour pressure

Calculation of polychlorinated biphenyl (PCB) content

PTI/13

PTI/13 BS EN 12846:2002 (BS 2000-484:2003)

BS EN 12606-1:2000 (BS 2000-459.1:2000) Method by distillation

BS EN 12177:2000 (BS 2000-425:2002)

PTI/13

Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method

PTI/13

BS EN 12607:-

PTI/13

BS EN 12592:2000 (BS 2000-47:2000) Methods of test for petroleum and its products. BS 2000-47. Bitumen and bituminous binders. Determination of solubility

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the resistance to hardening under the influence of heat and air

BS EN 12847:2002 (BS 2000-485:2003) Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions

BS EN 12607-1:2000 (BS 2000-460.1:2000) RTFOT method

PTI/13

BS EN 12593:2000 (BS 2000-80:2000)

PTI/13 PTI/13 BS EN 12848:2002 (BS 2000-486:2003)

BS EN 12607-2:2000 (BS 2000-460.2:2000) TFOT Method

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point

PTI/13 PTI/13

BS EN 12594:2000 (BS 2000-461:2000)

PTI/13

BS EN 12607-3:2000 (BS 2000-460.3:2000) RFT Method

PTI/13

Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples

BS EN 12595:2000 (BS 2000-319:2000)

Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method

PTI/13 PTI/13

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity

BS EN 12766:-

PTI/13

Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products

BS EN 12849:2002 (BS 2000-487:2003) Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions

BS EN 12634:1998 (BS 2000-449:1999)

PTI/13

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of mixing stability with cement of bitumen emulsions

BS EN 12850:2002 (BS 2000-488:2003) Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the pH value of bitumen emulsions

PTI/13

Page 20 of 53

BS EN ISO 12937:2001 (BS 2000-438:2001)

BS EN 13132:2000 (BS 2000-466:2001)

Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method PTI/13, PTI/13/3

Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching PTI/13

BS EN 13016:Liquid petroleum products. Vapour pressure

PTI/13

Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of staining tendency of bitumens

Determination of air saturated vapour pressure (ASVP)

Methods of test for petroleum and its products. Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)

BS EN 14275:2003 (BS 2000-509:2003)

BS EN 13301:2003 (BS 2000-504:2003) BS EN 13016-1:2000 (BS 2000-394:2001)

BS EN 14274:2003 (BS 2000-508:2003)

PTI/13

PTI/13

PTI/13

BS EN 13016-2:2000 (BS 2000-409:2001)

BS EN 13302:2003 (BS 2000-505:2003)

BS EN ISO 14596:1998 (BS 2000-447:1998)

Determination of absolute vapour pressure (AVP) between 40 $0DC and 100 $0DC

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus

Methods of test for petroleum and its products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry

PTI/13

PTI/13

PTI/13 BS EN 13074:2002 (BS 2000-493:2002) Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation

PTI/13

BS EN 13303:2003 (BS 2000-506:2003)

BS EN ISO 14597:1999 (BS 2000-433:1999)

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens

Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry

PTI/13 PTI/13

BS EN 13075:Methods of test for petroleum and its products

BS EN 61691:Design automation

BS EN 13357:2002 (BS 2000-502:2002) Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens

BS EN 13075-1:2002 (BS 2000-494:2002) Determination of breaking value of cationic bitumen emulsions, mineral filler method

BS EN 61691-1:1997 VHDL language reference manual

GEL/93 PTI/13

PTI/13

DD ENV 50208:BS EN 13723:2002 (BS 2000-489:2002)

BS EN 13075-2:2002 (BS 2000-495:2002) Determination of fines mixing time of cationic bitumen emulsions

PTI/13

DD ENV 50208-6:1998

Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)

Data interchange format for simulated and measured data (ISMD)

GEL/93

PTI/13

BS EN 13131:2000 (BS 2000-465:2001) Methods of test for petroleum and its products. Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method

BS EN 14077:2003 (BS 2000-510:2004)

PTI/13

DD ENV 50218:1996 Description of a parametrized European mini test chip

GEL/93

Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method PTI/13 Page 21 of 53

DD ENV 50219:1996

PD 6631:1998

Description of the reliability test structures of the European mini test chip GEL/93

Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)

DD ENV 50247:-

BS 3575:1963 Specification for rivets for the attachment of friction linings

FME/6 IST/37 BS 4620:1970

Pinnacles Component Information Standard 1.2

Specification for rivets for general engineering purposes

DD ENV 50247-1:1999 The PCIS tag library

GEL/93

FME/6 The preceding standards, overseen by committee FME/6, have been declared obsolescent as they are no longer used for current technologies.

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE

DD ENV 50247-2:2000

BS 6910:-

The SGML declaration and SGML document type definitions (DTDs)

Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.

CP 143:-

GEL/93

BS ISO 2909:2002 (BS 2000-226:2002)

Code of practice for sheet roof and wall coverings

CP 143-1:1958

Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity

BS 6910-2:1989

Aluminium, corrugated and troughed

PTI/13

BS ISO 3007:1999 (BS 2000-69:2001) Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method PTI/13

B/542/6 This standard has been proposed for obsolescence prior to ultimate withdrawal as it makes reference to a number of redundant standards, including British Standards which have been replaced by BS EN’s, and also contains some clauses which are in direct con

Petroleum products. Determination of ash

PTI/13

BS ISO 6296:2000 (BS 2000-439:2001)

BS 5258:Safety of domestic gas appliances

BS 275:1927 Specification for dimensions of rivets ($9H inch to 1$9L inch diameter)

FME/6

Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method PTI/13

BS 5258-2:1975 Cooking appliances

GSE/35 This standard has been proposed for withdrawal as it is no longer used.

BS 641:1951 Dimensions of small rivets for general purposes

FME/6 BS 5386:Specification for gas burning appliances

BS 1109:1943

BS ISO 15911:2000 (BS 2000-355:2001)

GEL/20 This standard has been declared obsolescent as, in the opinion of the committee, it urgently requires revision for which resources are unavailable and is furthermore no longer in wide general use.

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

BRITISH STANDARDS DECLARED OBSOLESCENT

BS ISO 6245:2001 (BS 2000-4:2002)

Code of practice for on-site installation

Specification for cold forged mild steel rivets for cold closing

Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data

FME/6

BS 5386-3:1980 Domestic cooking appliances burning gas

PTI/13

GSE/35 This standard has been proposed for withdrawal as it has been replaced by BS EN 30-1-3:2003.

BS 1974:1953 Specification for large aluminium alloy rivets ($9H in. to 1 in. nominal diameters)

FME/6 Page 22 of 53

BS 5386-4:1991

BS 3156-11.4.4:1994

Built-in domestic cooking appliances

Hydrogen sulfide, carbonyl sulfide, and sulfur-containing odorants by gas chromatography using a flame photometric detector

GSE/35 This standard has been proposed for withdrawal as it has been replaced by BS EN 30-1-3:2003.

BS 5386-6:1991 Specification for domestic gas cooking appliances with forced-convection ovens

BS 767:1983 Specification for centrifuges of the basket and bowl type for use in industrial and commercial applications MCE/19 Superseded by BS EN 12547:1999

PTI/15

BS 4131:1973 Specification for terrazzo tiles

B/524 Superseded by BS EN 13748-1:2004

BS 770:-

GSE/35 This standard has been proposed for withdrawal as it is no longer used.

Methods for chemical analysis of cheese

BS 4357:1968 Specification for precast terrazzo units

BS 770-10:1986 BS 6862:Specification for cables for vehicles

B/524

Determination of total solids content (reference method)

Superseded by BS EN 13748-1:2004

AW/5 Superseded by BS EN ISO 5534:2004 BS 6862-1:1971 Cables with copper conductors

GEL/20 This standard has been proposed for withdrawal since the committee believes that it is no longer in general use, and there is no significant manufacture of this product within the UK. This standard is not superseded/replaced by any other British or Europe

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms

BS 1139:Metal scaffolding

BS 4727-1:BS 1139-5:1990

Terms common to power, telecommunications and electronics

Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements

BS 4727-1:Group 02:1980

B/514

BS ISO 10202:-

Superseded by BS EN 12810-1:2003

Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards

BS 4727:-

Electrical and magnetic devices terminology

GEL/1 BS 3156:Analysis of fuel gases

BS 4727-1:Group 03:1971 Relay terminology

GEL/1

BS ISO 10202-5:1998 Use of algorithms

BS 3156-11:-

IST/12

BS ISO 10202-7:1998 Key management

Methods for non-manufactured gases

BS 4727-1:Group 04:1986 Measurement terminology

GEL/1

BS 3156-11.4:-

IST/12

BS ISO 10202-8:1998 General principles and overview

IST/12 The preceding standards, from the BS ISO 10202 series overseen by committee IST/12, have been proposed for withdrawal because the equivalent International Standards and forthcoming amendments have been approved for direct use in the UK.

Determination of sulfur compounds in natural gas

BS 4727-1:Group 05:1985 Semiconductor terminology

GEL/1

BS 3156-11.4.1:1994 Introduction

PTI/15 Superseded by BS ISO 19739:2004

BS 4727-1:Group 06:1973 Electronic tube terminology

GEL/1 BS 3156-11.4.2:1994 Odoriferous sulfur compounds by gas chromatography using an electrochemical detector

BS 4727-1:Group 09:1991 Electromagnetic compatibility

GEL/1

PTI/15 Superseded by BS ISO 19739:2004

BRITISH STANDARDS WITHDRAWN

BS 4727-1:Group 10:1991 Insulating solids, liquids and gases

GEL/1

Page 23 of 53

BS 4727-1:Group 11:1991 Printed circuits

GEL/1

BS 4727-3:Group 06:1971

BS 6068-2.28:-

Radio location and navigation terminology

Determination of phosphorus. Ammonium molybdate spectrometric method See BS EN 1189

GEL/1 BS 4727-2:BS 4727-3:Group 11:1983

Terms particular to power engineering

BS 6548:Maintainability of equipment

Space radiocommunications terminology

BS 4727-2:Group 05:1972 Voltage fluctuation terminology

GEL/1

BS 4727-2:Group 06:1985 Switchgear and controlgear terminology (including fuse terminology)

GEL/1

GEL/1 The preceding standards, from the BS 4727-1, -2 and -3 series overseen by committee GEL/1, have been withdrawn as they come from a series that is part of the IEC International Electrotechnical Vocabulary (IEV). They are based on (but not directly equivale

BS 5293:-

GEL/1

Generation, transmission and distribution of electricity terminology

DS/1 Superseded by BS EN 60300-3-14:2004

BS 6668-1:1986

BS 5293-14:1991 Method for determination of light transmittance of toluene extract (rapid method)

BS 4727-2:Group 11:1986

Guide to the planning of maintenance and maintenance support

BS 6668:Textile lifting slings

Sampling and testing carbon black for use in the rubber industry

BS 4727-2:Group 07:1973 Tariffs terminology

BS 6548-4:1993

PRI/50 Superseded by BS ISO 3858:2004

Specification for lifting slings for general service made from certain natural and man-made fibre ropes MHE/15 Superseded by BS EN 1492-4:2004

GEL/1 BS 7556:1992

BS 5293-15:1991 BS 4727-2:Group 18:1992 Electric traction

GEL/1

BS 4727-2:Group 19:1997 Power system protection

GEL/1

Method for determination of light transmittance of toluene extract for product evaluation PRI/50 Superseded by BS ISO 3858:2004

Thermostatic radiator valves. Specification for dimensions and details on connection

RHE/16 Superseded by BS EN 215:2004

BS EN 288:-

BS 5760:-

Specification and approval of welding procedures for metallic materials

Reliability of systems, equipment and components

BS 4727-3:Terms particular to telecommunications and electronics

BS 5760-1:1996

BS EN 288-3:1992

Dependability programme elements and tasks

DS/1 Superseded by BS EN 60300-2:2004

BS 4727-3:Group 01:1971 General telecommunication and electronics terminology

GEL/1

BS 4727-3:Group 03:1992

BS 5973:1993 Code of practice for access and working scaffolds and special scaffold structures in steel

BS EN 288-8:1995

B/514

Telegraphy, facsimile and data communication

Superseded by BS EN 12811-1:2003 GEL/1 BS 6068:Water quality

BS 4727-3:Group 04:1976 Broadcasting and television terminology

GEL/1

Welding procedure tests for the arc welding of steels WEE/36 Superseded by BS EN ISO 15614-1:2004

BS 6068-2:Physical, chemical and biochemical methods

Approval by a pre-production welding test

WEE/36 Superseded by BS EN ISO 15613:2004

BS EN 1066:1998 Adhesives. Sampling

STI/52 Superseded by BS EN ISO 15605:2004

Page 24 of 53

BS EN 1070:1998 Safety of machinery. Terminology

BS ISO 9144:1991

MCE/3 This standard has been withdrawn following withdrawal of the corresponding EN 1070 under BT CO52/2004 results, CEN/TC 114. Its subject matter is now covered by EN IS0 12100:2003

BS EN 1189:1997 (BS 6068-2.28:1997) Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method EH/3/2 Superseded by the dual numbered standard BS EN ISO 6878:2004, BS 6068-2.28:2004.

Securities. Optical character recognition line. Position and structure

BS ISO 13491-2:2000

IST/12 This standard has been withdrawn as it is no longer used within the UK

Security compliance checklists for devices used in magnetic stripe cards systems

IST/12

BS ISO/IEC TR 13818:-

BS ISO 15022:-

Information technology. Generic coding of moving pictures and associated audio information

Securities. Scheme for messages (data field dictionary)

BS ISO 15022-1:1999 BS ISO/IEC TR 13818-5:1997 Software simulation

Data field and message design rules and guidelines

IST/12

IST/37 This standard has been withdrawn as it is now out of date BS ISO 15022-2:1999

BS EN 1281:-

BS IEC 60050:-

Anaesthetic and respiratory equipment. Conical connectors

International electrotechnical vocabulary

BS EN 1281-1:1997 Cones and sockets

BS IEC 60050(111):1996 Physics and chemistry

CH/121/1 Superseded by BS EN ISO 5356-1:2004

BS ISO/IEC 7816:Identification cards. Integrated circuit(s) cards with contacts

Maintenance of the data field dictionary and catalogue of messages

IST/12

BS ISO 15668:1999 Banking. Secure file transfer (retail)

GEL/1 This standard has been withdrawn as it is one of a series that is part of the IEC International Electrotechnical Vocabulary (IEV). It is based on (but not directly equivalent to) an IEC standard that has either subsequently been withdrawn and replaced - o

IST/17 This standard is withdrawn as ISO/IEC 7816-2:1999/Amd 1:2004 is approved for UK use

Design of joints and jointing in building construction code of practice will supersede BS 6093:1993

BRITISH STANDARDS UNDER REVIEW

B/547 BS 2594:1975

BS ISO/IEC 7816-8:1999 Security related interindustry commands

BS EN 131:Ladders

Specification for carbon steel welded horizontal cylindrical storage tanks

PVE/21

IST/17 This standard is withdrawn as ISO/IEC 7816-8:2004 is approved for UK use

BS ISO 9362:1994

BS ISO/IEC 7816-9:2000

Banking. Banking telecommunication messages. Bank identifier codes

BS EN 131-5 Accessories for ladders

B/512

BS EN 747:-

IST/12

Additional interindustry commands and security attributes

IST/17 This standard is withdrawn as ISO/IEC 7816-9:2004 is approved for UK use

NEW WORK STARTED

BS 6093

BS ISO/IEC 7816-2:1999 Dimensions and location of the contacts

IST/12

BS ISO 13491:-

Furniture. Bunk beds and high beds for domestic use

BS EN 747-1 (Revision)

Banking. Secure cryptographic devices (retail)

Safety, strength and durability requirements

CW/41 BS ISO 13491-1:1998 Concepts, requirements and evaluation methods

IST/12

BS EN 747-2 (Revision) Test methods

CW/41 Page 25 of 53

BS EN 13025-2 BS EN 858:-

BS EN ISO 10350:-

Separator systems for light liquids (e.g. oil and petrol)

Plastics. Acquisition and presentation of comparable single-point data

Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l

PKW/5

BS EN 858-1:2002/Amendment 1 BS EN ISO 10350-1 Moulding materials

Principles of product design, performance and testing, marking and quality control

B/505

BS EN 13025-3

will supersede BS EN ISO 10350-1:2001 PRI/21

BS EN 957:Stationary training equipment

BS EN 957-1 (Revision) General safety requirements and test methods SW/136/4

Removable head (open head) round steel and tinplate containers with nominal capacity of 20, 25 and 30 l PKW/5

BS EN ISO 10942

BS EN 13165:2001/Amendment 2

Ophthalmic instruments. Direct ophthalmoscopes will supersede BS EN ISO 10942:1998 CH/172/6

Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specifications PRI/72

BS EN ISO 10943 Ophthalmic instruments. Indirect ophthalmoscopes will supersede BS EN ISO 10943:1998 CH/172/6

BS EN 1616/Corrigendum 1 Concrete pipes and fittings, unreinforced, steel fibre and reinforced

BS EN ISO 13433 Geotextiles and geotextile related products. Dynamic perforation test [cone drop test]

B/553 B/505 BS EN ISO 11979:BS EN 13520/Amendment 1

Ophthalmic implants. Intraocular lenses

BS EN 1617/Corrigendum 1 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

B/505

Footwear. Test methods for uppers, lining and insocks. Abrasion resistance TCI/69

BS EN ISO 11979-9 Multifocal lenses

CH/172/7 BS EN ISO 13789 (Revision) BS EN 1739 (Revision) BS EN ISO 11979-10 Phakic intraocular lenses

Determination of shear strength for in-plane forces of joints between prefabricated components made of AAC or LAC will supersede BS EN 1739:1998

CH/172/7

B/523

BS EN 12012:Plastics and rubber machines. Size reduction machines

BS EN 1963 Textile floor coverings. Tests using the Lisson Tretrad Machine will supersede BS EN 1963:1998

BS EN 12012-4

PRI/3

Safety requirements for agglomerators

MCE/3/2 BS EN ISO 9994/Amendment 2 Lighters. Safety specifications

BS EN 13014 (Revision)

CW/32

BS EN XXXX Glass packaging. Finishes for bottles

Connections for gas sampling tubes to anaesthetic and respiratory equipment will supersede BS EN 13014:2000 CH/121/1

Thermal performance of buildings. Transmission heat loss coefficient. Calculation method will supersede BS EN ISO 13789:1999 B/540

BS EN ISO 14555 Welding. Arc stud welding of metallic materials will supersede BS EN ISO 14555:1998 WEE/-/1

BS EN ISO 14731 Welding coordination. Tasks and responsibilities will supersede BS EN 719:1994

WEE/36

BS EN 14960 Inflatable play equipment. Safety requirements and test methods

SW/65

PKW/5/21 BS EN 13025:Packaging. Light gauge metal containers

BS EN 10079 Definition of steel products

will supersede BS EN 10079:1993 ISE/5

BS EN 14974 Facilities for users of roller sports equipment. Safety requirements and test methods

SW/65 Page 26 of 53

BS EN 14975

BS EN 60745:-

BS EN 62273:-

Safety of hand-held motor-operated electric tools

Methods of measurement for radio transmitters

BS EN 60745-2-13/Amendment

BS EN 62273-1

Particular requirements for chain saws will supersede BS EN 50144-2-13:2002 CPL/61/6

Performance characteristics for terrestrial digital television transmitters

Loft ladders. Requirements, marking and testing

B/512

BS EN 14987 Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications PRI/21

BS EN 80416:BS EN 61009:-

Basic principles for graphical symbols for use on equipment

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)

BS EN 14989:Chimneys and air supply duct systems for room-sealed appliances. Requirements and test methods. Appliances

EPL/103

BS EN 80416-1 (Edition 2) Creation of symbol originals

will supersede BS EN 80416-1:2002 GEL/3

BS EN 61009-1/Amendment 2 General rules

BS EN 14989-1

PEL/23/1

Vertical terminals for C6-type appliances

B/506

Determination of the freeze-thaw resistance of autoclaved aerated concrete

BS EN 61338:-

B/523

Waveguide type dielectric resonators

BS EN XXXXX:Laboratory safety showers

BS EN ISO 15681:Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA)

BS EN XXXXX

BS EN 61338-2 Guidelines for oscillator and filter applications

EPL/49

BS EN XXXXX-1 Body showers using water

LBI/18

BS EN ISO 15681-1 BS EN 61378:Convertor transformers

Method by flow injection analysis (FIA)

BS EN 00134122 Textile floor coverings. Classification of flat, woven, knitted or needled textile floor coverings without pile

EH/3/2 BS EN 61378-3 Application guide

BS EN ISO 15681-2 Method by continuous flow analysis (CFA) EH/3/2

PRI/3 PEL/14 BS EN 00134130

BS EN 61558:-

Resilient, textile and laminate floor coverings. Evaluation and requirements of volatile organic compounds (VOC) emissions

Safety of power transformers, power supply units and similar

BS EN ISO 30993 Biological evaluation of medical devices. Terminology

CH/194

BS EN 60601:Medical electrical equipment

PRI/3 BS EN 61558-2-15 Particular requirements for isolating transformers for the supply of medical locations

BS EN CSA07001

PEL/96

BS EN 60601-1-9

BS EN 62272:-

General requirements for basic safety and essential performance. Collateral standard. Requirements for the reduction of environmental impacts CH/62/1

Digital radio broadcasting in the band below 30 MHz

Translation Services. Requirements for translation service providers SVS/9

BS EN WI00127105 Guidance on direct and extended applications

FSH/22 BS EN 62272-2 Methods of measurement for DRM transmitters EPL/103

BS EN WI00127106 Mounting and fixing in reaction to fire tests

FSH/22 Page 27 of 53

BS ISO 363:Textile machinery and accessories. Flat steel healds with closed end loops

BS ISO 363-2

BS ISO 15830:-

BS ISO 18594

Road vehicles. Anthropomorphic side impact dummy. Design and performance specifications for the WorldSID 50th percentile male side impact dummy

Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material. WEE/29

BS ISO 15830-1 Definitions, symbols and rationale

Dimensions of healds manufactured of hardened strip steel

BS ISO 20421:-

AUE/7

Cryogenic vessels. Large transportable vacuum insulated vessels

AUE/7

BS ISO 20421-1

TCI/33 BS ISO 15830-2 Mechanical subsystem BS ISO 6185:Inflatable boats

Design, fabrication, inspection and testing PVE/18

BS ISO 15830-3 Electronic subsystems

BS ISO 6185-4 Boats with an overall length of between 8m and 24m and with a motor maximum power rating of 75kW and greater

AUE/7

GME/33

AW/54

BS ISO 15830-4 User's manual

AUE/7 BS ISO 7823:Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics

BS ISO 7823-3/Amendment 1 Continuous cast sheets

BS ISO 21092 Essential oils. Characterization

BS ISO 21308:Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)

BS ISO/IEC 16022:2000/Corrigendum 1 Information technology. International symbology specification. Data matrix

BS ISO 21308-3

IST/34

General, mass and administrative exchange parameters

AUE/9

PRI/75 BS ISO 16455:BS ISO 8536:Infusion equipment for medical use

Space systems. Stress-corrosion cracking

BS ISO 21750 Road vehicles. Tyre pressure monitoring systems

AUE/4

BS ISO 16455-1 BS ISO 8536-12 Check valves

Test methods for determining susceptibility of metals

ACE/68/-/8

CH/212

BS ISO 14269:Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment

BS ISO 16455-2 Selection of metallic materials

ACE/68/-/8

BS ISO 18072:BS ISO 14269-2

Ships and marine technology. Ship structures

Heating, ventilation and air-conditioning test method and performance will supersede BS ISO 14269-2:1997 AGE/6

BS ISO 18072-1

BS ISO 14269-3 Determination of effect of solar heating will supersede BS ISO 14269-3:1997 AGE/6

General requirements for their limit state assessment SME/32/8

BS ISO 22010 Space Systems. Mass properties control ACE/68/-/1

BS ISO 22239 Road vehicles. Child seat presence and orientation detection (CPOD) system. Specifications

AUE/7

BS ISO 22240 Road vehicles. Vehicles safety information model (VSIM)

AUE/7

BS ISO 23671 Passenger car. Method for measuring relative wet grip performance. Loaded tyres

AUE/4

Page 28 of 53

BS ISO XXX:Glass in building

BS ISO XXX-XX Silvered flat glass mirror

04/19977101 DC

04/19988589 DC

BS EN 12875-4 Mechanical dishwashing resistance of utensils. Part 4. Rapid test for domestic ceramic articles CW/29

BS EN 14959 Textiles. Touch and close fasteners. Resistance to fraying of male and female tapes after cutting

04/19978545 DC

04/19991839 DC

BS EN 14954 Surfaces for sports areas. Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas PRI/57 Comments for the above document are required by 31 August, 2004

BS EN 12875-5 Mechanical dishwashing resistance of utensils. Part 5. Rapid test for ceramic catering articles CW/29

TCI/66

B/520

BS ISO XXXX Laryngoscope blades. Single use for tracheal intubation. Particular requirements CH/121/2

04/19992989 DC

PD CEN/TR 00138053 Non-destructive testing. Automated ultrasonic examination. Selection and application of systems WEE/46

BS EN 14903 Surfaces for indoor sports areas. Determination of rotational friction

04/19978549 DC BS EN 14953 Surfaces for sports areas. Determination of thickness of unbound mineral surfaces for outdoor sports areas

PRI/57 Comments for the above document are required by 31 August, 2004 PRI/57

PD XXXX Guidance on CE marking for masonry mortars covering factory production control (attestation of conformity 2+)

B/519

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

Comments for the above document are required by 31 August, 2004

04/19993011 DC

04/19985587 DC

BS EN 14904 Surfaces for sports areas. Specification for indoor surfaces for multi-sports use

PRI/57

BS EN 894-4 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 4. Location and arrangement of displays and control actuators

Comments for the above document are required by 31 August, 2004

04/30008013 DC

PH/9/6

BS ISO 3266 Eyebolts grade 4 for general lifting purposes

MHE/1 04/19976141 DC

04/19986163 DC

BS ISO 12647-4 Graphic technology. Process control for the manufacture of halftone colour separations, proofs and production prints. Part 4. Publication gravure processes PAI/43

BS ISO 22155 Soil quality. Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method EH/4/3

04/19976491 DC

04/19987135 DC

BS EN 14956 Surfaces for sports areas. Determination of water content of unbound mineral surfaces for outdoor sports areas

BS EN 14952 Surfaces for sports areas. Determination of water absorption of unbound minerals

04/30031170 DC BS EN ISO 9173-1 Dentistry. Extraction forceps. Part 1. General requirements CH/106/4

04/30037050 DC

PRI/57 PRI/57

Comments for the above document are required by 31 August, 2004

04/19976493 DC BS EN 14955 Surfaces for sports areas. Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas

QS/3

04/19987805 DC

04/30043823 DC

BS ISO 14505-1 Ergonomics of the thermal environment. Evaluation of thermal environment in vehicles. Part 1. Principles and methods for assessment of thermal stress

ISO 20126 Dentistry. Physical properties of manual toothbrushes CH/106/7

PH/9/1 PRI/57

Comments for the above document are required by 31 August, 2004

Comments for the above document are required by 31 August, 2004

ISO/IEC 17021 General requirements for bodies operating assessment and certification/registration of quality or environmental management systems

04/30044646 DC BS 5911-6 Concrete pipes and ancillary products. Part 6. Specification for road gullies and gully cover slabs

B/505 Page 29 of 53

04/30050372 DC EN 13981-3 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Part 3. Castings NFE/35/5

04/30050436 DC BS ISO 22613 Protective clothing. General test methods and performance requirements for hand protection PH/3/8

04/30071550 DC

04/30078159 DC

BS 5400-2 Steel, concrete and composite bridges. Part 2. Specification for loads £18.00 members £36.00 non-members

IEC 60568 ED 2. Nuclear power plants. Instrumentation important to safety. In-core instrumentation for neutron fluence rate (flux) measurements in power reactors NCE/8

B/525/10

04/30074919 DC

04/30078720 DC

EN ISO 6508-1 Metallic materials. Rockwell hardness test. Part 1. Test method (scales A, B, C, D, E, F, G, H, K, N, T) ISE/NFE/4/5

CISPR 16-2-3 AMD 1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2. Methods of measurement of disturbances and immunity GEL/210/12

04/30074924 DC 04/30058509 DC BS EN 14985 Cranes. Slewing jib cranes

MHE/3/3

EN ISO 6508-3 Metallic materials. Rockwell hardness test. Part 3. Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) ISE/NFE/4/5

04/30058849 DC

04/30081109 DC BS EN ISO 140-16 Acoustics. Measurement of sound insulation in buildings and of building elements. Part 16. Laboratory measurement of the sound reduction index improvement by additional lining EH/1/6

ISO 17356-5 Road vehicles. Open interface for embedded automotive applications. Part 5. OSEK/VDX network management (NM) £18.00 members £36.00 non-members AUE/16

04/30074927 DC

04/30058984 DC

04/30075921 DC

ISO 17356-3 Road vehicles. Open interface for embedded automotive applications. Part 3. OSEK/VDX operating system (OS) AUE/16

IEC 60095-2 ED 4. Lead-acid starter batteries. Part 2. Dimensions of batteries and dimensions and marking of terminals PEL/21

04/30063128 DC

04/30076771 DC

04/30086451 DC

prEN ISO 15848-2 Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Part 2. Production acceptance test PSE/7

ISO 24340 Resilient floor coverings. Determination of thickness of layers

BS ISO 15952 Soil quality. Effects of pollutants on juvenile land snails (Helicidae). Determination of the effects on growth by soil contamination

EN ISO 6508-2 Metallic materials. Rockwell hardness test. Part 2. Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) ISE/NFE/4/5

PRI/60

04/30084857 DC BS EN ISO 10524-1 Pressure regulators for use with medical gas systems. Part 1. Pressure regulators and pressure regulators with flow-metering devices CH/121/6

04/30085464 DC ISO 22112 Dentistry. Artificial teeth for dental prostheses CH/106/2

EH/4 04/30076774 DC 04/30066717 DC

BS ISO 24341 Resilient floor coverings. Determination of length, width and straightness of sheet PRI/60

EN 14970 MLYS Knitted fabrics characterization. Measurement of length of yarn in stitch

TCI/24 04/30078065 DC 04/30066721 DC EN 14971 MSD Knitted fabrics characterization. Measurement of stitch density

TCI/24

ISO/IEC FCD 18045 Information technology. Security techniques. Methodology for IT security evaluation £33.00 members £66.00 non-members

04/30086896 DC ISO 10110-1 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 1. General CPW/172

04/30088075 DC

IST/33

ISO/IEC 18028-2 Information technology. Security techniques. IT network security. Part 2. Network security architecture

IST/33

Page 30 of 53

04/30089236 DC

04/30105027 DC ISO 21789 Gas turbines. Safety

EN 14976 Mattress tickings. Specification and methods of test

04/30099864 DC

TCI/72

04/30093313 DC ISO/IEC 9798-6 Information technology. Security techniques. Entity authentication. Part 6. Mechanisms using manual data transfer

BS EN 539-2 Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Part 2. Test for frost resistance B/542/3

04/30100025 DC

IST/33

prEN 534 Corrugated bitumen sheets. Product specification and test methods

04/30093427 DC

04/30100359 DC

QS/1

ISO 16612 Graphic technology. Variable printing data exchange using PPML and PDF (PPML/VDX)

04/30094668 DC

04/30106510 DC BS ISO 871 Plastics. Determination of ignition temperature using a hot-air furnace PRI/26

04/30107387 DC

B/542/6

ISO 9000 Quality management systems. Fundamentals and vocabulary

MCE/16 Comments for the above document are required by 20 September, 2004

ISO/IEC GUIDE 53 Conformity assessment. Guidance on the use of an organization's quality management system in product certification

QS/3 PAI/43 04/30107414 DC

EN/IEC 19440 Enterprise integration. Constructs for enterprise modelling

BS EN 14968 Semantics for groundwater data interchange

04/30101075 DC

AMT/5

CPI/113

IEC 62308 Reliability assessment methods

DS/1 04/30095069 DC BS EN 443 Firefighters helmets

04/30108735 DC

PH/6

04/30102776 DC EN ISO 717-1 AMD 1. Acoustics. Rating of sound insulation in buildings and of building elements. Part 1. Airborne sound insulation EH/1/6

04/30095174 DC ISO 389-7 Acoustics. Reference zero for the calibration of audiometric equipment. Part 7. Reference threshold of hearing under free-field and diffuse-field listening conditions

ISO/IEC FCD 15408-1 Information technology. Security techniques. Evaluation criteria for IT security. Part 1. Introduction and general model

IST/33

04/30108739 DC 04/30102781 DC

04/30095586 DC

EN ISO 717-2 AMD 1. Acoustics. Rating of sound insulation in buildings and of building elements. Part 2. Impact sound insulation EH/1/6

EN 1254-6 Copper and copper alloys. Plumbing fittings. Part 6. Fitting with push-fit ends

04/30103854 DC

EH/1/1

ISO/IEC FCD 15408-2 Information technology. Security techniques. Evaluation criteria for IT security. Part 2. Security functional requirements £18.00 members £36.00 non-members

IST/33 NFE/34/3

04/30095590 DC EN 1254-7 Copper and copper alloys. Plumbing fittings. Part 7. Fittings with press ends for metallic tubes NFE/34/3

ISO 15004-1 Ophthalmic instruments. Fundamental requirements and test methods. Part 1. General requirements applicable to all ophthalmic instruments

04/30108742 DC

CH/172/6

ISO/IEC FCD 15408-3 Information technology. Security techniques. Evaluation criteria for IT security. Part 3. Security assurance requirements £18.00 members £36.00 non-members

04/30103951 DC 04/30096239 DC EN 50414 Insulating and sheathing materials of electric and optical fibre cables. Test methods for analysis of lead in PVC. Method A. Total lead content determination with flame excitation atomic absorption spectrometry. Method B. Qualitative analysis of GEL/20

IST/33

ISO 22309 Microbeam analysis. Quantitative analysis by energy dispersive spectrometry (EDS) for elements with atomic numbers 11 (Na) and above

04/30109512 DC

CII/9

CEN/TS 14631 Postal services. Automatic identification of receptacles and containers. Receptacle asset numbering

SVS/4 Comments for the above document are required by 23 August, 2004

Page 31 of 53

04/30109516 DC

04/30114247 DC

CEN TS 14441 Postal services. Mail aggregates. Creation, processing and tracking SVS/4 Comments for the above document are required by 23 August, 2004

BS EN ISO 7547 Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations SME/32

04/30109692 DC

04/30114298 DC

04/30114377 DC

EN 54-3 AMD 2. Fire detection and fire alarm systems. Part 3. Fire alarm devices. Sounders FSH/12

EN 50164-2:2002/prA1 Lightning protection components (LCD). Part 2. Requirements for conductors and earth electrodes GEL/81

ISO 14788 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet

04/30109709 DC

04/30114374 DC ISO 3575 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities

ISE/10

ISE/10

04/30114401 DC 04/30114307 DC

PREN 14962 Water quality. Guidance on the scope and selection of fish sampling methods

EH/3/5

04/30111691 DC ISO 24408 Ships and marine technology. Position-indicating lights for life-saving appliances. Testing, inspection, and marking of production units SME/32/1

04/30112294 DC ISO 6871-1 AMD 1. Dental base metal casting alloys. Part 1. Cobalt-based alloys

EN 61543:1995/prA1 Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility PEL/23/1

EN ISO 20838 Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for amplification and detection for qualitative methods

04/30114458 DC

AW/9

04/30114315 DC EN ISO 23993 Thermal insulation for building equipment and industrial installations. Thermal conductivity. Determination of design values

NFE/34

04/30114461 DC

B/540 CH/106/2 04/30114339 DC

04/30112298 DC ISO 6871-2 AMD 1. Dental base metal casting alloys. Part 2. Nickel-based alloys

CH/106/2

EN 14905 Copper and copper alloys. Plumbing fittings. Recommended practice for the installation of copper and copper alloy plumbing fittings

IEC 61753-082-2 Fibre optic interconnecting devices and passive components performance standard. Part 082-2. Pigtailed 1,31/1,55 um WWDM devices for category C. Controlled environment GEL/86/2

EN 14935 Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method NFE/34

04/30114464 DC EN 14936-1 Copper and copper alloys. Determination of aluminium content. Part 1. Titrimetric method NFE/34

04/30113177 DC ISO 8178-11 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions MCE/14/-/3

04/30114347 DC

04/30114467 DC

CENELEC TS 50410 Household and similar electrical appliances. Safety. Particular requirements for decorative child-appealing robots CPL/61

EN 14936-2 Copper and copper alloys. Determination of aluminium content. Part 2. FAAS method NFE/34

04/30114470 DC 04/30114360 DC ISO 17713-1 Meteorology. Wind measurements. Part 1. Wind tunnel test methods for rotating anemometer performance EH/2/-/5

04/30113958 DC ISO/DIS 3071 Textiles. Determination of pH of aqueous extract

TCI/80

EN 14937-1 Copper and copper alloys. Determination of antimony content. Part 1. Spectrometric method

NFE/34

04/30114473 DC 04/30114371 DC

EN 14937-2 Copper and copper alloys. Determination of antimony content. Part 2. FAAS method

EN 10339 Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection

NFE/34 ISE/8 Page 32 of 53

04/30114476 DC

04/30114690 DC

EN 14938-2 Copper and copper alloys. Determination of bismuth content. Part 2. FAAS method

EN 131-5 Ladders. Part 5. Accessories for ladders

04/30114870 DC

CPL/61/8/1 B/512 04/30114881 DC

NFE/34 04/30114758 DC 04/30114479 DC EN 14939 Copper and copper alloys. Determination of beryllium content. FAAS Method

NFE/34

IEC 60092-350 ED 3. Electrical installation in ship. Part 350. Shipboard power cables. General construction and test requirements GEL/20/6

04/30114482 DC

04/30114784 DC

EN 14940-2 Copper and copper alloys. Determination of chromium content. Part 2. FAAS method NFE/34

EN 14977 Copper and copper alloys. Detection of tensile stress. 5 % ammonia test NFE/34

04/30114485 DC

04/30114844 DC

EN 14941 Copper and copper alloys. Determination of cobalt content. FAAS method

IEC 61375-2 ED 1. Electric railway equipment. Train bus. Part 2. Train communication network conformance testing £18.00 members £36.00 non-members GEL/9/1

NFE/34

04/30114488 DC EN 14942-2 Copper and copper alloys. Determination of arsenic content. Part 2. FAAS method

IEC 61326-3 ED 1. Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3. Immunity requirements for equipment performing or intended to perform safety related functions (functional safety) in industrial applications GEL/65/1

04/30114936 DC EN 50439 Railway applications. Reliability tests for high power semiconductors devices. Part 1. Standard base-plate modules

GEL/9/2

04/30114955 DC ISO 16708 Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods PSE/17/2

04/30114853 DC

NFE/34

04/30114492 DC ISO/IEC 19796-1 Information technology. Quality management, assurance, and metrics. Part 1. General approach £18.00 members £36.00 non-members

IEC 60335-2-76 AMD 1. ED 2. Household and similar electrical appliances. Safety. Part 2-76. Particular requirements for electric fence energizers CPL/61/8/1

04/30114965 DC EN 14973 Conveyor belts for use in underground installations. Electrical and flammability safety requirements PRI/67

04/30114859 DC

IST/43

04/30114503 DC EN ISO 717-2 AMD 2. Acoustics. Rating of sound insulation in buildings and of building elements. Part 2. Impact sound insulation EH/1/6

EH/4

04/30114861 DC BS ISO 21268-2 Soil Quality. Leaching. Part 2. Batch test using a liquid to solid ratio of 10 l/kg dry matter

04/30114638 DC BS 7950 AMD 2. Specification for enhanced security performance of casement and tilt/turn windows for domestic applications B/538/1

04/30114677 DC CISPR 15 AMD 1. ED 6.0. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GEL/210/11

04/30115045 DC

BS ISO 21268-1 Soil Quality. Leaching. Part 1. Batch test using a liquid to solid ratio of 2 l/kg dry matter

EN ISO 14819-6 Traffic and Travel Information (TTI). TTI messages via traffic message coding. Part 6. Encryption and conditional access for the radio data system. Traffic message channel ALERT C coding EPL/278

04/30115060 DC

EH/4

EN 14175-6 Fume cupboards. Part 6. Variable air volume fume cupboards

LBI/18 04/30114864 DC IEC 60335-2-76 AMD 1. ED 2. Household and similar electrical appliances. Safety. Part 2-76. Particular requirements for electric fence energizers CPL/61/8/1

04/30115140 DC IEC 60794-5 Optical fibre cables. Part 5. Sectional specification for microduct cabling for installation by blowing GEL/86/1

Page 33 of 53

04/30115144 DC

04/30115299 DC

04/30115370 DC

IEC 60793-1-49 Optical fibres. Part 1-49. Measurement methods and test procedures. Differential mode delay GEL/86/1

ISO/DIS 5172 Gas welding equipment. Blowpipes for gas welding, heating and cutting. Specifications and tests

EN 60730-2-3/prA11. Automatic electrical controls for household and similar use. Part 2-3. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps CPL/72

04/30115148 DC

04/30115317 DC

ISO/IEC 14764 ED 2. Software engineering. Software life cycle processes. Maintenance

BS EN ISO 10350-1 Plastics. Acquisition and presentation of comparable single-point data. Part 1. Moulding materials

IST/15

WEE/18

04/30115376 DC

PRI/21 04/30115151 DC 04/30115323 DC

ISO/IEC 16085 Software engineering. Software life cycle processes. Risk management

IST/15

ISO 19579 Solid mineral fuels. Determination of sulfur by IR spectroscopy

BS EN 60730-2-15/prA11. Automatic electrical controls for household and similar use. Part 2-15. Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications CPL/72

PTI/16 04/30115378 DC

04/30115154 DC EN 50412-1 Immunity requirements for power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz. Part 1. Residential, commercial and industrial environment PEL/205

04/30115337 DC ISO 666 Machine tools. Mounting of grinding wheels by means of hub flanges MTE/13

04/30115344 DC IEC 61347-2-2 AMD 2. ED 1. Lamp control gear. Part 2-2. Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps CPL/34/3

04/30115187 DC BS EN ISO 1265 Plastics. Poly (vinyl chloride) resins. Determination of number of impurities and foreign particles

PRI/82 04/30115348 DC 04/30115260 DC IEC 60745-2-13 ED 2. Safety of hand-held motor operated electric tools. Part 2-13. Particular requirements for chain saws CPL/61/6

IEC 61047 AMD 1. ED 2. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. Performance requirements

AMT/5

CPL/72

04/30115294 DC

04/30115365 DC

ISO/DIS 2137 Petroleum products and lubricants. Determination of cone penetration of lubricating greases and petrolatum

EN 60730-2-14/prA11. Automatic electrical controls for household and similar use. Part 2-14. Particular requirements for electric actuators CPL/72

PTI/13

EN 60730-2-18/prA11. Automatic electrical controls for household and similar use. Part 2-18. Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

04/30115385 DC

CPL/34/3

EN 60730-2-13/prA11 Automatic electrical controls for household and similar use. Part 2-13. Particular requirements for humidity sensing controls

ISO 20242-1 Industrial automation systems and integration. Service interface for testing applications. Part 1. Overview

04/30115382 DC

CPL/72

04/30115358 DC 04/30115288 DC

EN 60730-2-16/prA11. Automatic electrical controls for household and similar use. Part 2-16. Particular requirements for automatic electrical water level controls of the float type for household and similar applications CPL/72

EN 60730-2-5:2002/prA11. Automatic electrical controls for household and similar use. Part 2-5. Particular requirements for automatic electrical burner control systems CPL/72

04/30115390 DC EN 60730-2-19/prA11. Automatic electrical controls for household and similar use. Part 2-19. Particular requirements for electrically operated oil valves, including mechanical requirements CPL/72

Page 34 of 53

04/30115395 DC

04/30115578 DC

EN 60730-2-11/prA11. Automatic electrical controls for household and similar use. Part 2-11. Particular requirements for energy regulators

ISO 7152 AMD 1. Camping tents and caravan awnings. Vocabulary and list of equivalent terms

04/30115500 DC

CPL/72

EN 14983 Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage

TCI/74

FSH/23

EN 54-2 AMD 1. Fire detection and fire alarm systems. Part 2. Control and indicating equipment FSH/12

04/30115398 DC 04/30115503 DC

CENELEC TS 50436 Alcohol interlocks. Test methods and performance requirements

AUE/16

EN 14986 Design of fans working in potentially explosive atmospheres

FSH/23

ISO 15547-1 Petroleum and natural gas industries. Plate heat exchangers. Part 1. Plate-and-frame type PSE/17/-/6

04/30115520 DC

04/30115430 DC

04/30115525 DC

ISO 15547-2 Petroleum and natural gas industries. Plate heat exchangers. Part 2. Brazed aluminium plate-fin type PSE/17/-/6

prEN 12312-14 Aircraft ground support equipment. Part 14. Disabled-Incapacitated passenger boarding equipment

04/30115437 DC

04/30115549 DC

ISO 5598 Fluid power systems and components. Vocabulary £18.00 members £36.00 non-members MCE/18/-/1

BS ISO 22222-1 Personal financial planning. Part 1. Terms and definitions, process and practice

ISO 15603 Solid mineral fuels. Determination of total chlorine by bomb combustion

04/30115596 DC

PTI/16

ISO 20299-2 Film for wrapping rubber bales. Part 2. Natural rubber PRI/50

04/30115599 DC

ACE/57

ISO 8913 Aerospace series. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 F/3000 psi, 204 C/21 000 kPa ACE/69

04/30115623 DC

SVS/6

04/30115550 DC ISO 16873 Hydraulic fluid power. Pressure switches. Mounting surfaces MCE/18/-/5

04/30115588 DC ISO 8332 Rubber compounding ingredients. Sulfur. Methods of test PRI/23

04/30115425 DC

04/30115446 DC

04/30115583 DC

BS ISO 22222-2 Personal financial planning. Part 2. Ethical principles

SVS/6

EN 50402 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems GEL/31/19

04/30115551 DC 04/30115626 DC ISO 3941 Classification of fires

BS ISO 22222-3 Personal financial planning. Part 3. Requirements for competence of a financial planner

04/30115467 DC ISO 7240-13 Fire detection and alarm systems. Part 13. Compatibility assessment of system components

FSH/2 SVS/6 04/30115634 DC

FSH/12/1

04/30115494 DC EN 815 AMD 1. Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock B/513/2

04/30115497 DC EN 45545-6 Railway applications. Fire protection on railway vehicles. Part 6. Fire control and management systems FSH/19

04/30115552 DC

ISO 18935 Imaging materials. Determination of water resistance of colour images CPW/42

BS ISO 22222-4 Personal financial planning. Part 4. Experience requirements

SVS/6 04/30115650 DC 04/30115565 DC EN 14978 Laminate floor coverings. Elements with acrylic based surface layer. Specifications, requirements and test methods PRI/60

IEC 60364-7-720 ED 1. Electrical installations of buildings. Part 7-720. Requirements for special installations or locations. Caravan parks, camping parks, marinas and similar locations JPEL/64

Page 35 of 53

04/30115657 DC

04/30115780 DC

PD IEC PAS 60099-7:2004

IEC 61347-2-13 ED 1. Lamp controlgear. Part 2. Particular requirements for d.c. for a.c. supplied electronic controlgears for LED modules CPL/34/3

ISO 9355-3 Safety of machinery. Ergonomic requirements for the design of signals and control actuators. Part 3. Control actuators

Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 600999-6, 61643-1, 12, 21, 311, 321, 331 & 61643-341

PH/9/6

04/30115788 DC 04/30115677 DC EN 14975 Loft ladders. Requirements, marking and testing

B/512

ISO/IEC PAS 20886 Information technology. International security, trust, and privacy alliance. Privacy framework

IST/33

04/30115844 DC ISO/DIS 20421-1 Cryogenic vessels. Large transportable vacuum insulated vessels. Part 1. Design, fabrication, inspection and testing £18.00 members £36.00 non-members PVE/18

04/30115688 DC ISO 23935 Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones ACE/69

DOCUMENTS NOT ISSUED AS DPCs

IEC 61225 ED 2. Nuclear power plants. Instrumentation and control important to safety. Requirements for electrical supplies

NCE/8

04/30115747 DC CEN TS 13149-3 Public transport. Road vehicle scheduling and control EPL/278

04/30115773 DC BS EN 14987 Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications PRI/21

04/30115777 DC ISO/IEC 15476-3 Information technology. CDIF semantic metamodel. Part 3. Data definitions £18.00 members £36.00 non-members

IST/15

The revision text of this Draft International Standard (which is being developed in parallel with CEN via the Vienna Agreement) has been issued for a third enquiry. The UK had submitted votes of approval on both previous drafts. The first enquiry draft wa Mike Hodson [email protected] B/513/1

ISO/DIS 20179 Water quality. Determination of microcystins. Method by solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection

BS EN 14517 (BS 2000-526/IP 526)

04/30115723 DC

EN ISO 2867 Earth-moving machinery. Access systems

04/30115682 DC EN 14989-1 Chimneys and air supply duct systems for roomsealed appliances. Requirements and test methods. Part 1. Vertical terminals for C6-type appliances B/506

This document, which will shortly be available, implements verbatim IEC PAS 60099-7:2004. Ken Armitage [email protected] PEL/37/1

Methods of test for petroleum and its products. BS 2000-526. Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method (Identical with IP 526-2005)

No interest has been registered for this standard in the UK and the committee has therefore decided to abstain from voting. Roger Wellings [email protected]

This European Standard has recently been approved and will shortly be adopted as a British Standard in the BS 2000 series. Silviu Olariu [email protected] PTI/13

EH/3/2

ISO 23611:Soil quality. Sampling of soil invertebrates

ISO 23611-1 PD EN/TR 14715:2004 Safety of machinery. Ionizing radiation emitted by machinery. Guidance for the application of technical standards in the design of machinery in order to comply with legislative requirements

Hand-sorting and formalin extraction of earthworms

No current standard is superseded. Manjit Matharu [email protected] MCE/3

PD IEC PAS 60099:Surge arresters

Page 36 of 53

ISO 23611-2

prCEN ISO/TS 14907-1 Description of test procedures

Sampling and extraction of microarthropods (Collembola and Acarina)

Although not circulated as a DPC, a copy of the formal vote text for this draft technical specification (a revision of DD ENV ISO 14907-1:2001) may be obtained on request from the committee secretary (below). Simon Bounds [email protected] EPL/278

ISO/TC190/SC4 have circulated the preceding two documents at enquiry stage. UK Technical committee EH/4 did not approve of the new work item proposals, and have agreed to abstain from votes on them. Copies of the drafts are available on request from the Tim Newins [email protected] EH/4

prEN 13149:Public transport. Road vehicle scheduling and control systems

prEN 13149-4

prCEN ISO/TS 17261 (ISO/TS 17261:2004) Automatic vehicle and equipment identification. Intermodal goods transport. Architecture and terminology

Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams

prEN 13149-5 CANopen cabling specifications

prCEN ISO/TS 18234-1 (ISO/DTS 18234-1:2004)

prEN 14294 Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes

This European Standard has recenly been approved at Final Vote ballot and will shortly be available as a British Standard. Silviu Olariu [email protected] PRI/52

prCEN ISO/TS 14907:Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment

Location referencing for applications (TPEG-Loc_3.0/001)

Although not circulated as DPCs, copies of the formal vote text for the preceding draft CEN/ISO Technical Specifications (which are now at final vote stage) may be obtained on request from the committee secretary (below). Simon Bounds [email protected] EPL/278

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE

prCEN ISO/TS 18234:-

General application rules for CANopen transmission

Although not circulated as DPCs, copies of the formal vote text for the preceding documents (which will supersede the similarly-numbered existing 'Drafts for Development') may be obtained on request from the committee secretary (below). Simon Bounds [email protected] EPL/278

prCEN ISO/TS 18234-6 (ISO/DTS 18234-6:2004)

Introduction, numbering and versions (TPEG-INV/102)

prCEN ISO/TS 18234-2 (ISO/DTS 18234-2:2004) Syntax, semantics and framing structure (SSF) (TPEG-SSF_3.0/002)

prEN 612 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet

No Draft for Public Comment will be produced for this draft revision but the document has been issued to the relevant CEN members for voting. Copies are available from the committee secretary (below), to whom any comments should be submitted by no later Douglas Jordan [email protected] B/542/8

prCEN ISO/TS 18234-3 (ISO/DTS 18234-3:2004)

prEN ISO 10426:-

Service and network information (SNI) application (TPEG-SNI_3.0/002)

Petroleum and natural gas industries. Cements and materials for well cementing

prCEN ISO/TS 18234-4 (ISO/DTS 18234-4:2004)

prEN ISO 10426-4 (ISO 10426-4:2004)

Road traffic message (RTM) application (TPEG-RTM_3.0/003)

Preparation and testing of foamed cement slurries at atmospheric pressure

prCEN ISO/TS 18234-5 (ISO/DTS 18234-5:2004) Public transport information application (TPEG-PTI_3.0/001)

The UK participated actively in the preparation of this ISO standard and voted approval in the DIS ballot. It is accordingly proposed that a UK vote of approval now be submitted to CEN/TC12. Please submit any comments to the committee secretary (below) by Keith Seyde [email protected] PSE/17

prEN ISO 15681:Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Page 37 of 53

EN 572-1:2004 Definitions and general physical and mechanical properties £41.80 members £44.00 non-members

prEN ISO 15681-1 (ISO 15681-1:2003) Method by flow injection analysis (FIA)

EN 993-19:2004

B/520/1

Determination of thermal expansion by a different method £41.80 members £44.00 non-members

RPI/1 prEN ISO 15681-2 (ISO 15681-2:2003)

EN 572-2:2004 Float glass

Method by continuous flow analysis (CFA)

£41.80 members £44.00 non-members

The UK participated actively in the preparation of the preceding ISO standards, approved of the texts at the formal vote stage, and implemented the ISO Standards as sections of BS 6068-2. It is accordingly proposed that a vote of acceptance now be submitt Roger Wellings [email protected] EH/3/2

EN 993-20:2004

B/520/1

RPI/1

EN 572-3:2004 Polished wired glass £41.80 members £44.00 non-members

EN 1116:2004

B/520/1

EN 572-4:2004 Drawn sheet glass prEN ISO 21049 (ISO 21049:2004)

FW/3 B/520/1

The UK participated actively in the preparation of this ISO standard and voted approval in the FDIS ballot. It is accordingly proposed that a UK vote of approval be submitted to CEN/TC12. Please submit any comments to the committee secretary (below) by no Keith Seyde [email protected] PSE/17

£41.80 members £44.00 non-members

EN 1367-3:-

B/520/1

EN 572-6:2004 Wired patterned glass

EN 572-7:2004

EN 26:-

Wired or unwired channel shaped glass £41.80 members £44.00 non-members

Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners AMENDMENT 2:June 2004 to EN 26:1997

Boiling test for "Sonnenbrand basalt" CORRIGENDUM:May 2004 to EN 1367-3:2001

B/502

B/520/1

CEN EUROPEAN STANDARDS

EN 1367:Tests for thermal and weathering properties of aggregates

EN 572-5:2004 Patterned glass

£41.80 members £44.00 non-members

EN 12620:Aggregates for concrete CORRIGENDUM:May 2004 to EN 12620:2002

B/502

EN 12812:2004

B/520/1

EN 933:-

Falsework. Performance requirements and general design £89.30 members £94.00 non-members

B/514/26

Tests for geometrical properties of aggregates

£19.00 members £20.00 non-members

EN 12813:2004

GSE/34

Glass in building. Basic soda-lime silicate glass products

Kitchen furniture. Co-ordinating sizes for kitchen furniture and kitchen appliances £41.80 members £44.00 non-members

£41.80 members £44.00 non-members

Pumps. Shaft sealing systems for centrifugal and rotary pumps

EN 572:-

Determination of resistance to abrasion at ambient temperature £41.80 members £44.00 non-members

EN 933-6:Assessment of surface characteristics. Flow coefficient of aggregates CORRIGENDUM:May 2004 to EN 933-6:2001

B/502

Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design £89.30 members £94.00 non-members B/514/26

EN 993:Methods of test for dense shaped refractory products Page 38 of 53

EN 12859:-

EN 13164:-

Gypsum blocks. Definitions, requirements and test methods AMENDMENT 1:June 2004 to EN 12859:2001

Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification AMENDMENT 1:May 2004 to EN 13164:2001

£19.00 members £20.00 non-members

B/544/1

EN 13383-1:Specification CORRIGENDUM:May 2004 to EN 13383-1:2002

B/502

EN 13450:Aggregates for railway ballast

£19.00 members £20.00 non-members

B/540 EN 13000:2004 Cranes. Mobile cranes

CORRIGENDUM:May 2004 to EN 13450:2002

B/502

EN 13165:-

£131.10 members £138.00 non-members

MHE/3/5

EN 13043:Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas CORRIGENDUM:May 2004 to EN 13043:2002

Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification AMENDMENT 1:May 2004 to EN 13165:2001

EN 13453:Furniture. Bunk beds and high beds for non-domestic use

£19.00 members £20.00 non-members

B/540

B/502

FW/5

EN 13453-2:2004 Test methods £53.20 members £56.00 non-members

£19.00 members £20.00 non-members

EN 13055-1:-

£41.80 members £44.00 non-members

EN 13166:Thermal insulation products for buildings. Factory made products of phenolic foam (PF). Specification AMENDMENT 1:May 2004 to EN 13166:2001

EN 13055:Lightweight aggregates

EN 13453-1:2004 Test methods

FW/5 B/540

Lightweight aggregates for concrete, mortar and grout CORRIGENDUM:May 2004 to EN 13055-1:2002

EN 13544:Respiratory therapy equipment

EN 13171:-

EN 13060:2004 Small steam sterilizers

Thermal insulation products for buildings. Factory made wood fibre (WF) products. Specification AMENDMENT 1:May 2004 to EN 13171:2001

£108.30 members £114.00 non-members

£19.00 members £20.00 non-members

B/502

EN 13544-1:Nebulizing systems and their components AMENDMENT 1:June 2004 to EN 13544-1:2001

B/540

LBI/35/8

£19.00 members £20.00 non-members

CH/121/1 EN 13242:-

EN 13139:Aggregates for mortar CORRIGENDUM:May 2004 to EN 13139:2002

B/502

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction CORRIGENDUM:May 2004 to EN 13242:2002

EN 13748:Terrazzo tiles

B/502

EN 13157:2004 Cranes. Safety. Hand powered lifting equipment £108.30 members £114.00 non-members

EN 13748-2:2004 Terrazzo tiles for exterior use £89.30 members £94.00 non-members

B/524

EN 13374:2004

MHE/3/6

Temporary edge protection systems. Product specification, test methods £76.00 members £80.00 non-members B/514/21

EN 13383:Armourstone

EN 13775:Railway applications. Measuring of new and modified freight wagons

EN 13775-4:2004 Bogies with 2 wheelsets £76.00 members £80.00 non-members

RAE/1/-/9 Page 39 of 53

CEN/TR 14073:Office furniture. Storage furniture EN 13775-5:2004 Bogies with 3 wheelsets

EN 14483-4:2004

£53.20 members £56.00 non-members

RAE/1/-/9

Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel £53.20 members £56.00 non-members

CEN/TR 14073-1:2004 Dimensions

STI/36

£41.80 members £44.00 non-members

FW/3

EN 13775-6:2004 Multiple and articulated freight wagons £41.80 members £44.00 non-members

EN 14483-5:2004

RAE/1/-/9

CEN/TR 14699:2004 Office furniture. Terminology

Determination of resistance to chemical corrosion in closed systems £41.80 members £44.00 non-members

£53.20 members £56.00 non-members

FW/3 STI/36

EN 14278:Textiles. Determination of cotton fibre stickiness

CEN/TR 14715:2004 EN 14565:2004 Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification £53.20 members £56.00 non-members

EN 14278-1:2004 Method using a manual thermodetection device £41.80 members £44.00 non-members

PRI/60

TCI/24

EN 14401:2004

EN 15016:-

Rigid plastics containers. Methods to test the effectiveness of closures £41.80 members £44.00 non-members PKW/5/25

Technical drawings. Railway applications

CENELEC PUBLICATIONS

EN 15016-1:2004 General principles

EN 50090:-

£53.20 members £56.00 non-members

EN 14483:-

TDW/4

Vitreous and porcelain enamels. Determination of resistance to chemical corrosion

Safety of machinery. Ionizing radiation emitted by machinery. Guidance for the application of technical standards in the design of machinery in order to comply with legislative requirements. £76.00 members £80.00 non-members MCE/3

Home and building electronic systems (HBES)

EN 50090-9:Installation requirements

EN 15167:Technical drawings. Railway applications

EN 14483-1:2004 Determination of resistance to chemical corrosion by acids at room temperature £41.80 members £44.00 non-members

EN 50090-9-1:2004 Generic cabling for HBES class 1 twisted pair £108.30 members £114.00 non-members

EN 15167-2:2004 Parts lists

STI/36

£53.20 members £56.00 non-members

IST/6

TDW/4 EN 14483-2:2004

EN 50289:-

EN 15167-3:2004

Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours £53.20 members £56.00 non-members

Communication cables. Specifications for test methods

Handling of modifications of technical documents £41.80 members £44.00 non-members

TDW/4 STI/36

EN 50289-1:Electromagnetic performance £41.80 members £44.00 non-members

EPL/46

EN 14483-3:2004

CEN REPORTS

Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel £53.20 members £56.00 non-members

EN 50289-1-15:2004 Coupling attenuation of cable assemblies (laboratory conditions)

STI/36 Page 40 of 53

EN 60312:(IEC 60312/A2:2004) EN 50289-4-12:2004

EN 61290-5:Test methods for reflectance parameters

Vacuum cleaners for household use. Methods of measuring the performance AMENDMENT 2:June 2004 to EN 60312:1998

Testing vertical flame spread on bunched wires for sail communication cables £41.80 members £44.00 non-members

EN 61290-5-2:2004 (IEC 61290-5-2:2003)

CPL/59/6 EPL/46

Electrical spectrum analyzer test method GEL/86/3

EN 60444:EN 50342:-

Measurement of quartz crystal unit parameters

Lead-acid starter batteries. General requirements, methods of test and numbering AMENDMENT 3:June 2004 to EN 50342:2001

Standard data element types with associated classification schema for electric components

EN 60444-7:2004 (IEC 60444-7:2004)

£19.00 members £20.00 non-members

PEL/21

EN 61360:-

Measurement of activity and frequency dips of quartz crystal units

EN 61360-5:2004 (IEC 61360-5:2004)

EPL/49

Extensions to the EXPRESS dictionary schema

GEL/3

EN 50377:EN 60450:2004 (IEC 60450:2004)

Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications

EN 61960:2004 (IEC 61960:2003)

Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials

EN 50377-6-2:2004 Type SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre £76.00 members £80.00 non-members GEL/86/2

EN 60034:Rotating electrical machines

GEL/15/5

Secondary cells and batteries containing alkaline or other non-acid Electrolytes. Secondary lithium cells and batteries for portable applications PEL/21/1

EN 60745:Hand-held motor-operated electric tools. Safety

CEN TECHNICAL SPECIFICATIONS

EN 60745-2-18:2004 Particular requirements of strapping tools

CPL/61/6 EN 60034-1:2004 (IEC 60034-1:2004) Rating and performance

PEL/2

Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature

EN 61125:(IEC 61125/A1:2004) Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability AMENDMENT 1:June 2004 to EN 61125:1993 GEL/10

EN 60044:Instrument transformers

EN 60044-5:2004 (IEC 60044-5:2004) Capacitor voltage transformers

CEN TS 843:-

CEN TS 843-6:2004 Guidance for fractographic investigation £89.30 members £94.00 non-members

RPI/13 EN 61241:-

PEL/38

EN 60079:Electrical apparatus for explosive gas atmospheres

Electrical apparatus for use in the presence of combustible dust

EN 61241-1:2004 (IEC 61241-1:2004) Protection by enclosures 'tD'

GEL/31/20 EN 60079-2:2004 (IEC 60079-2:2001) Pressurized enclosures 'p'

GEL/31/17

CEN/TS 13388:2004 Copper and copper alloys. Compendium of compositions and products £108.30 members £114.00 non-members NFE/34

EN 61290:Optical amplifiers. Test methods

Page 41 of 53

CEN/TS 14405:2004 Characterisation of waste. Leashing behaviour test. Up-flow percolation test (under specific conditions) £76.00 members £80.00 non-members B/508/3

TR 102 046: June 2004 (Version 1.2.1) EN 301 843-5: June 2004 (Version 1.1.1)

Electronic Signatures and Infrastructures (ESI). Maintenance report Price on application TCT/101

Specific conditions for MF/HF radiotelephone transmitters and receivers Price on application

TCT/101

ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONS

TR 102 061: May 2004 (Version 1.1.1) Satellite Earth Stations and Systems (SES). Price on application

OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

TCT/101

TR 102 317: June 2004 (Version 1.1.1)

EN 301 489:(Version 1.1.1) Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for radio equipment and services

EN 301 489-27: June 2004 (Version 1.1.1) Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) Price on application

EG 200 053: June 2004 (Version 1.5.1) Electromagnetic compatibility and Radio spectrum Matters (ERM). Radio site engineering for radio equipment and systems Price on application TCT/101

Digital Radio Mondiale (DRM). System Specification Price on application

TCT/101 EN 301 843:Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services

EN 301 843-1: June 2004 (Version 1.2.1) Common technical requirements Price on application

TCT/101

ES 202 319: June 2004 (Version 1.1.1) Transmission and Multiplexing (TM). Passive optical components and cables. Optical fibre cables to be used for patchcord applications for single-mode optical fibre communication systems. Common requirements and conformance testing Price on application TCT/101

TR 100 392:-

EN 301 843-2: June 2004 (Version 1.2.1)

Terrestrial Trunked Radio (TETRA). Voice plus Data (V+D)

Specific conditions for VHF radiotelephone transmitters and receivers Price on application

TCT/101

TR 100 392-17:TETRA V+D and DMO specifications

TR 100 392-17-2: June 2004 (Version 1.1.1) Release 1.2

EN 301 843-4: June 2004 (Version 1.2.1) Specific conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers Price on application

TR 102 334: May 2004 (Version 1.1.1) Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). Price on application TCT/101

ES 201 980: June 2004 (Version 2.1.1)

TCT/101

Electronic Signatures and Infrastructures (ESI). Process and tool for maintenance of ETSI deliverables Price on application TCT/101

TR 102 335:Electromagnetic compatibility and Radio spectrum Matters (ERM). System reference document for harmonized use of Digital Mobile Radio (DMR)

TR 102 335-1: June 2004 (Version 1.1.1) Tier 1 DMR#, expected to be for general authorization with no individual rights operation Price on application

TCT/101

TR 102 489: June 2004 (Version 1.1.1) Environmental Engineering (EE). European telecommunications standard for equipment practice. Thermal Management Guidance for equipment and its deployment Price on application TCT/101

Price on application

TCT/101 TCT/101

Page 42 of 53

TR 121 905: June 2004 (Version 6.7.0)

TS 102 127: June 2004 (Version 6.2.0)

TS 102 226: June 2004 (Version 6.8.0)

Universal Mobile Telecommunications System (UMTS). Vocabulary for 3GPP Specifications (3GPP TR 21.905 version 6.7.0 Release 6) Price on application

Smart cards. Transport protocol for CAT applications. Stage 2 (Release 6) Price on application TCT/101

Smart cards. Remote APDU structure for UICC based applications (Release 6) Price on application

TS 102 164: May 2004 (Version 1.2.2)

TS 102 230: June 2004 (Version 3.3.0)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Price on application TCT/101

Smart cards. UICC-Terminal interface. Physical, electrical and logical test specification (Release 1999) Price on application TCT/101

TCT/101

TCT/101

TS 100 392:Terrestrial Trunked Radio (TETRA). Voice plus Data (V+D)

TS 100 392-15: June 2004 (Version 1.3.1) TETRA frequency bands, duplex spacings and channel numbering Price on application TCT/101

TS 102 221: June 2004 (Version 3.14.0)

TS 102 230: June 2004 (Version 4.3.0)

Smart cards. UICC-Terminal interface. Physical and logical characteristics (Release 1999) Price on application

TS 101 191: June 2004 (Version 1.4.1)

TCT/101

Digital Video Broadcasting (DVB). DVB mega-frame for Single Frequency Network (SFN) synchronization Price on application TCT/101

TS 102 221: June 2004 (Version 6.5.0) TS 102 230: June 2004 (Version 5.1.0)

Smart cards. UICC-Terminal interface. Physical and logical characteristics (Release 6) Price on application

TCT/101 TS 101 220: June 2004 (Version 6.4.0) TS 102 222: June 2004 (Version 6.5.0)

Smart cards. ETSI numbering system for telecommunication application providers (Release 6) Price on application

TCT/101

Integrated Circuit Cards (ICC). Administrative commands for telecommunications applications (Release 6) Price on application

TS 101 862: June 2004 (Version 1.3.2) Qualified Certificate profile

TCT/101

TS 101 909:Digital Broadband Cable Access to the Public Telecommunications Network. IP Multimedia Time Critical Services

TS 101 909-13:Trunking Gateway Control Protocol

Digital Broadband Cable Access to the Public H.248 option Price on application TCT/101

Smart cards. UICC Application Programming Interface (UICC API) for Java Card (TM) (Release 6) Price on application TCT/101

TS 102 223: June 2004 (Version 4.9.0) TS 102 250:-

Smart cards. Card Application Toolkit (CAT) (Release 4) Price on application

TCT/101

TS 102 223: June 2004 (Version 5.6.0)

Speech Processing, Transmission and Quality Aspects (STQ). QoS aspects for popular services in GSM and 3G networks

TS 102 250-2: June 2004 (Version 1.2.1)

Smart cards. Card Application Toolkit (CAT) (Release 5) Price on application

TCT/101 TS 101 909-13-1: May 2004 (Version 1.2.1)

Smart cards. UICC-Terminal interface. Physical, electrical and logical test specification (Release 5) Price on application TCT/101

TS 102 241: June 2004 (Version 6.4.0)

TCT/101

Price on application

Smart cards. UICC-Terminal interface. Physical, electrical and logical test specification (Release 4) Price on application TCT/101

TS 102 223: June 2004 (Version 6.5.0)

Definition of Quality of Service parameters and their computation Price on application TCT/101

TS 102 330: June 2004 (Version 1.1.1)

Smart cards. Card Application Toolkit (CAT) (Release 6) Price on application

TCT/101

Access and Terminals (AT). Portable Service Format (PSF) for Interactive Home Devices Price on application TCT/101 Page 43 of 53

TS 124 008: June 2004 (Version 4.14.0) TS 102 332: June 2004 (Version 1.1.1)

TS 123 079: June 2004 (Version 5.5.0)

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). Backhauling of ISDN Q.921 (Transport of DSS1 over IP). ISDN Q.921-User Adaptation Layer (IUA) [Endorsement of RFC 3057 (2001), modified] Price on application TCT/101

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Support of Optimal Routeing (SOR). Technical realization. Stage 2 (3GPP TS 23.079 version 5.5.0 Release 5) Price on application TCT/101

TS 102 333: June 2004 (Version 1.1.1) Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). Gate control protocol Price on application TCT/101

TS 122 004: June 2004 (Version 4.3.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General on supplementary services (3GPP TS 22.004 version 4.3.0 Release 4) Price on application TCT/101

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface Layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 4.14.0 Release 4) Price on application TCT/101

TS 124 008: June 2004 (Version 5.12.0) TS 123 140: June 2004 (Version 5.11.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Multimedia Messaging Service (MMS). Functional description. Stage 2 (3GPP TS 23.140 version 5.11.0 Release 5) Price on application TCT/101

TS 123 153: June 2004 (Version 5.8.0) Universal Mobile Telecommunications System (UMTS). Out of Band Transcoder Control. Stage 2 (3GPP TS 23.153 version 5.8.0 Release 5) Price on application

TCT/101

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface Layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 5.12.0 Release 5) Price on application TCT/101

TS 124 228: June 2004 (Version 5.9.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Signalling flows for the IP multimedia call control based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). Stage 3 (3GPP Price on application TCT/101

TS 122 004: June 2004 (Version 5.1.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General on supplementary services (3GPP TS 22.004 version 5.1.0 Release 5) Price on application TCT/101

TS 122 078: June 2004 (Version 5.14.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Customized Applications for Mobile network Enhanced Logic (CAMEL). Service description. Stage 1 (3GPP TS 22.078 version 5.14.0 Release 5) Price on application TCT/101

TS 123 040: June 2004 (Version 5.7.1)

TS 124 007: June 2004 (Version 3.10.0)

TS 124 229: June 2004 (Version 5.9.0)

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface signalling layer 3. General aspects (3GPP TS 24.007 version 3.10.0 Release 1999) Price on application TCT/101

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). Stage 3 (3 Price on application TCT/101

TS 124 008: June 2004 (Version 3.19.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface Layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 3.19.0 Release 1999) Price on application TCT/101

TS 125 304: June 2004 (Version 3.14.0) Universal Mobile Telecommunications System (UMTS). Price on application

TCT/101

Digital cellular telecommunications system (Phase 2+). Price on application TCT/101 Page 44 of 53

TS 129 060: June 2004 (Version 5.10.0)

TS 151 010:Digital cellular telecommunications system (Phase 2+). Mobile Station (MS) conformance specification

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General Packet Radio Service (GPRS). GPRS Tunnelling Protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 5.10.0 Release 5) Price on application TCT/101

TS 151 010-1: May 2004 (Version 5.8.0)

TS 129 228: June 2004 (Version 5.8.0)

TS 151 010-3: May 2004 (Version 5.1.0)

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). IP Multimedia (IM) Subsystem Cx and Dx Interfaces. Signalling flows and message contents (3GPP TS 29.228 version 5.8.0 Release 5) Price on application TCT/101

Layer 3 (L3) Abstract Test Suite (ATS) (3GPP TS 51.010-3 version 5.1.0 Release 5) Price on application

TS 129 229: June 2004 (Version 5.7.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Cx and Dx interfaces based on the Diameter protocol. Protocol details (3GPP TS 29.229 version 5.7.0 Release 5) Price on application TCT/101

TS 129 329: June 2004 (Version 5.6.0) Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Sh interface based on the Diameter protocol (3GPP TS 29.329 version 5.6.0 Release 5) Price on application TCT/101

TS 149 031: May 2004 (Version 4.4.0) Digital cellular telecommunications system (Phase 2+). Price on application TCT/101

TS 149 031: May 2004 (Version 5.4.0)

Conformance specification (3GPP TS 51.010-1 version 5.8.0 Release 5) Price on application TCT/101

TCT/101

TS 151 011: June 2004 (Version 4.12.0) Digital cellular telecommunications system (Phase 2+). Specification of the Subscriber Identity Module. Mobile Equipment (SIM-ME) interface (3GPP TS 51.011 version 4.12.0 Release 4) Price on application TCT/101

The following ETSI documents are issued under the One-Step Approval OP20041022.Comments are welcome and should be addressed to the named contact to arrive by 17 September 2004. EN 300 468: June 2004 (Version 1.6.1) Digital Video Broadcasting (DVB). Specification for Service Information (SI) in DVB systems Contact: Steve Ripley Email: [email protected] Note: Please order by quoting the reference 04/635068 DC (ETSI) £20.00 TCT/301/JTC(TV)

EN 301 192: June 2004 (Version 1.4.1) Digital Video Broadcasting (DVB). DVB specification for data broadcasting Contact: Steve Ripley Email: [email protected] Note: Please order by quoting the reference 04/635069 DC (ETSI) £20.00 TCT/301/JTC(TV)

EN 302 304: June 2004 (Version 1.1.1)

ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP) The following ETSI documents are issued under the One-Step Approval OP20041001.Comments are welcome and should be addressed to the named contact to arrive by 27 August 2004. EN 301 515: June 2004 (Version 2.1.0) Global System for Mobile communication (GSM). Requirements for GSM operation on railways Contact: Steve Green Email: [email protected] Note: Please order by quoting the reference 04/635064 DC (ETSI) £20.00 TCT/301/MSG

Digital Video Broadcasting (DVB). Transmission System for Handheld Terminals (DVB H) Contact: Steve Ripley Email: [email protected] Note: Please order by quoting the reference 04/635070 DC (ETSI) £20.00 TCT/301/JTC(TV)

The following ETSI documents are issued under the One-Step Approval OP20041029.Comments are welcome and should be addressed to the named contact to arrive by 24 September 2004. EN 300 392:Terrestrial Trunked Radio (TETRA). Voice plus Data (V+D)

EN 300 392-12:Supplementary services stage 3

Digital cellular telecommunications system (Phase 2+). Price on application TCT/101

Page 45 of 53

EN 300 392-12-21: June 2004 (Version 1.2.0) Ambience Listening (AL)

IEC 60085:2004 (Edition 3)

Contact: Mark Redman Email: [email protected] Note: Please order by quoting the reference 04/635072 DC (ETSI) £20.00 TCT/301/TETRA

IEC 60384-22:2004

Electrical insulation. Thermal classification £27.84 members £29.00 non-members

GEL/15/5

IEC 60099:Surge arresters

IEC 60384-22-1:2004

EN 300 744: June 2004 (Version 1.5.1) Digital Video Broadcasting (DVB). Framing structure, channel coding and modulation for digital terrestrial television Contact: Steve Ripley Email: [email protected] Note: Please order by quoting the reference 04/635073 DC (ETSI) £20.00 TCT/301/JTC(TV)

IEC 60099-4:2004 (Edition 2) Metal-oxide surge arresters without gaps for a.c. systems £184.32 members £192.00 non-members PEL/37

IEC 60269:Low-voltage fuses

Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

Vote V20040813 EN 301 473: June 2004 (Version 1.3.0) Satellite Earth Stations and Systems (SES). Aircraft Earth Stations (AES) operating under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Contact: Panos Karaminas Email: [email protected] Note: Please order by quoting the reference 04/635066 DC (ETSI) £20.00 TCT/301/SES(MOBILE)

IEC PUBLICATIONS

Blank detail specification. Fixed surface mount multilayer capacitors of ceramic dielectric, class 2 £47.04 members £49.00 non-members EPL/40/1

IEC 60439:Low-voltage switchgear and controlgear assemblies

IEC 60439-4:2004 (Edition 2)

IEC 60269-2:-

FINAL ETSI DRAFTS FOR VOTE

Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, class 2 £90.24 members £94.00 non-members EPL/40/1

Particular requirements for assemblies for construction sites (ACS) £57.60 members £60.00 non-members PEL/17/3

IEC 60512:-

IEC 60269-2-1:2004 (Edition 4)

Connectors for electronic equipment. Basic tests and measurements

Examples of types of standardized fuses £184.32 members £192.00 non-members

PEL/32

IEC 60384:-

IEC 60512-25-6:2004 Test 25f. Eye pattern and jitter £51.84 members £54.00 non-members

EPL/48/2

Fixed capacitors for use in electronic equipment

IEC 60384-21:2004 Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, class 1 £90.24 members £94.00 non-members EPL/40/1

IEC 60601:Medical electrical equipment

IEC 60601-1:General requirements for safety

IEC 60601-1-6:2004 Collateral standard. Usability IEC 60384-21-1:2004 Blank detail specification. Fixed surface mount multilayer capacitors of ceramic dielectric, class 1 £47.04 members £49.00 non-members EPL/40/1

IEC 60076:Power transformers

IEC 60076-11:2004 Dry-type transformers £90.24 members £94.00 non-members

PEL/14

£139.20 members £145.00 non-members

CH/62/1

IEC 60695:Fire hazard testing

IEC 60695-7:Toxicity of fire effluent

Page 46 of 53

IEC 60695-7-1:2004 (Edition 2) General guidance

IEC 61837:IEC 61221:2004 (Edition 2)

£62.40 members £65.00 non-members

GEL/89

IEC 60811:Insulating and sheathing materials of electric and optical cables. Common test methods

Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (Category ISO-L-TCD). Specifications £28.80 members £30.00 non-members GEL/10

Surface mounted piezoelectric devices for frequency control and selection. Standard outline and terminal lead connections

IEC 61837-4:2004 Hybrid enclosure outlines £35.52 members £37.00 non-members

EPL/49 IEC 61241:-

IEC 60811-4:-

IEC 61850:-

Electrical apparatus for use in the presence of combustible dust

Methods specific to polypropylene and polypropylene compounds

Communication networks and systems in substations

IEC 61241-10:2004 IEC 60811-4-1:2004 (Edition 2) Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessme £69.12 members £72.00 non-members GEL/20/17

IEC 60825:Safety of laser products

Classification of areas where combustible dusts are or may be present £76.80 members £80.00 non-members GEL/31/20

IEC 61850-8:Specific communication service mapping (SCSM)

IEC 61850-8-1:2004

Waveguide type dielectric resonators

Mapping to MMS (ISO/IEC 9506 part 1 and part 2) over ISO 8802-3 £181.44 members £189.00 non-members PEL/57

IEC 61338-2:2004

IEC 62257:-

Guidelines for oscillator and filter applications £83.52 members £87.00 non-members

Recommendations for small renewable energy and hybrid systems for rural electrification

IEC 61338:-

EPL/49 IEC 62257-2:2004 IEC 60825-2:2004 (Edition 3)

From requirements to a range of electrification systems £139.20 members £145.00 non-members

IEC 61347:Specification for lamp controlgear

Safety of optical fibre communication systems (OFCS) £104.64 members £109.00 non-members

GEL/82 IEC 61347-2-3:-

EPL/76

IEC 60851:Winding wires. Test methods

Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps AMENDMENT 1:June 2004 to IEC 61347-2-3:2000

IEC CISPR 16:Specification for radio disturbance and immunity measuring apparatus and methods

£35.52 members £37.00 non-members

CPL/34/3

IEC 60851-5:Electrical properties AMENDMENT 2:June 2004 to IEC 60851-5:1996

IEC/TR 61499:-

£35.52 members £37.00 non-members

Function Blocks for industrial-process measurement and control systems

GEL/55

IEC 61047:2004 (Edition 2)

IEC/TR 61499-3:2004 Technical information

D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements £51.84 members £54.00 non-members CPL/34/3

£57.60 members £60.00 non-members

IEC CISPR 16-1:Radio disturbance and immunity measuring apparatus. Ancillary equipment

IEC CISPR 16-1-3:2004 (Edition 2) Disturbance power £83.52 members £87.00 non-members

GEL/210/12 GEL/65 IEC CISPR16-4:Uncertainties, statistics and limit modelling Page 47 of 53

ISO 5351:2004 IEC CISPR 16-4-3:2004 (Edition 2)

ISO 1920-1:2004 Sampling of fresh concrete

Statistical considerations in the determination of EMC compliance of mass-produced products £83.52 members £87.00 non-members GEL/210/12

£35.52 members £37.00 non-members

ISO PUBLICATIONS

Pulps. Determination of limiting viscosity number in cupri-ethylene diamine (CED) solution £62.40 members £65.00 non-members

PAI/11

B/517/1 Will not be implemented as a British Standard ISO 6145:ISO 2575:2004 (Edition 7)

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods

Road vehicles. Symbols for controls, indicators and tell-tales £109.44 members £114.00 non-members

ISO 6145-4:2004 (Edition 2)

AUE/12 ISO 257:2004 (Edition 3)

Will be implemented as an identical British Standard

Pesticides and other agrochemicals. Principles for the selection of common names £62.40 members £65.00 non-members

Continuous syringe injection method £57.60 members £60.00 non-members

ISO 4120:2004 (Edition 2)

Will be implemented as an identical British Standard

Sensory analysis. Methodology. Triangle test £57.60 members £60.00 non-members

ISO 6158:2004 (Edition 2)

PTI/15

AW/81 Will be implemented as an identical British Standard

AW/12 Will be implemented as an identical British Standard

ISO 302:2004 (Edition 2) Pulps. Determination of Kappa number £45.12 members £47.00 non-members

ISO 4526:2004 (Edition 2)

PAI/11 Will be implemented as an identical British Standard

STI/33 Will be implemented as a related British Standard

Metallic coatings. Electroplated coatings of nickel for engineering purposes £52.80 members £55.00 non-members

ISO 6707:-

STI/33 ISO 1209:Rigid cellular plastics. Determination of flexural properties

ISO 6707-1:2004 (Edition 3) General terms

Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials

£28.80 members £30.00 non-members

PRI/24 Will be implemented as an identical British Standard

£141.12 members £147.00 non-members

B/500/-/1 Will be implemented as an identical British Standard

ISO 4613-2:Preparation of test specimens and determination of properties AMENDMENT 1:June 2004 to ISO 4613-2:1995

ISO 1209-2:2004 (Edition 2)

ISO 7165:-

£11.52 members £12.00 non-members

Determination of flexural strength and apparent flexural modulus of elasticity £35.52 members £37.00 non-members

Building and civil engineering. Vocabulary

Will be implemented as a related British Standard

ISO 4613:ISO 1209-1:2004 Basic bending test

Metallic coatings. Electrodeposited coatings of chromium for engineering purposes £49.92 members £52.00 non-members

PRI/82 Will be implemented as an identical British Standard

Fire-fighting. Portable fire extinguishers. Performance and construction AMENDMENT 2:May 2004 to ISO 7165:1999

FSH/2 Will not be implemented as a British Standard

PRI/24 Will be implemented as an identical British Standard

ISO 1920:Testing of concrete

ISO 7619:Rubber, vulcanized or thermoplastic. Determination of indentation hardness

Page 48 of 53

ISO 7619-1:2004

ISO 9349:2004 (Edition 2)

Durometer method (shore hardness) £40.32 members £42.00 non-members

ISO 7932:2004 (Edition 3)

PRI/22 Will be implemented as an identical British Standard

ISO 7619-2:2004 IRHD pocket meter method

Preinsulated ductile iron pipeline systems £35.52 members £37.00 non-members

Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of presumptive bacillus cereus. Colony-count technique at 30$0DC £52.80 members £55.00 non-members

PSE/10 Will not be implemented as a British Standard

AW/9 Will be implemented as an identical British Standard

£35.52 members £37.00 non-members

Sensory analysis. Methodology. Duo-trio test £66.24 members £69.00 non-members

PRI/22 Will be implemented as an identical British Standard

ISO 8179:-

AW/12

Ductile iron pipes. External zinc-based coating

Will be implemented as an identical British Standard

ISO/IEC 7816:Identification cards. Integrated circuit(s) card with contacts

ISO 8179-1:2004 (Edition 2) Metallic zinc with finishing layer

ISO/IEC 7816-2:-

ISO 10483:Road vehicles. Intelligent power switches

£28.80 members £30.00 non-members

Cards with contacts. Dimensions and location of the contacts. Assignment of contacts C4 and C8 AMENDMENT 1:June 2004 to ISO/IEC 7816-2:1999

PSE/10 Will be implemented as an identical British Standard

£11.52 members £12.00 non-members

IST/17

ISO 8796:2004 (Edition 2)

IST/17

Polyethylene PE 32 and PE 40 pipes for irrigation laterals. Susceptibility to environmental stress cracking induced by insert-type fittings. Test method and requirements £28.80 members £30.00 non-members PRI/88 Will be implemented as an identical British Standard

Will not be implemented as a British Standard

ISO/IEC 7816-8:2004 (Edition 2) Commands for security operations £66.24 members £69.00 non-members

ISO 10399:2004 (Edition 2)

ISO 10483-1:2004 (Edition 2) High-side intelligent power switch £71.04 members £74.00 non-members

AUE/16 Will not be implemented as a British Standard

ISO 10498:2004 Ambient air. Determination of sulphur dioxide. Ultraviolet fluorescence method £45.12 members £47.00 non-members

EH/2/3

Will not be implemented as a British Standard

ISO 8835:Inhalational anaesthesia systems

ISO/IEC 7816-9:2004 (Edition 2) Commands for card management

ISO 8835-4:2004

£49.92 members £52.00 non-members

IST/17 Will not be implemented as a British Standard

Anaesthetic vapour delivery devices £62.40 members £65.00 non-members

CH/121/1 Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO 10981:2004 (Edition 2) Nuclear fuel technology. Determination of uranium in reprocessing-plant dissolver solution. Liquid chromatography method £40.32 members £42.00 non-members

NCE/9

ISO 7876:Fuel injection equipment. Vocabulary

ISO 7876-5:2004 Common rail fuel injection equipment system £40.32 members £42.00 non-members

MCE/22 Will be implemented as an identical British Standard

ISO/IEC 9075 (Parts 1-4, 9-11, 13-14) (CD-ROM) Information technology. Database languages. SQL (various parts) £253.44 members £264.00 non-members IST/40 Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO/IEC 11581:Information technology. User system interfaces and symbols. Icon symbols and functions

Page 49 of 53

ISO/IEC 11581-5:2004 Tool icons £75.84 members £79.00 non-members

ISTIECCT/Will not be implemented as a British Standard

ISO 13765-1:2004

ISO/IEC 14496:-

Determination of consistency using the penetrating cone method £35.52 members £37.00 non-members

Information technology. Coding of audio-visual objects

RPI/1 Will be implemented as an identical British Standard

AMENDMENT 1:June 2004 to ISO/IEC 14496-2:2004

ISO 11670:Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability CORRIGENDUM 1:May 2004 to ISO 11670:2003 CPW/172 Will be implemented as an identical British Standard

£11.52 members £12.00 non-members

ISO 13765-2:2004 Determination of consistency using the reciprocating flow table method £35.52 members £37.00 non-members

RPI/1 Will be implemented as an identical British Standard

ISO 13765-3:2004 Determination of joint stability

ISO/IEC 13251:2004

RPI/1 IST/-/1

Will not be implemented as a British Standard

ISO 13584:Industrial automation systems and integration. Parts library

Will be implemented as an identical British Standard

Logical resource. Logical model of supplier library with aggregate values and explicit content £141.12 members £147.00 non-members

AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK

£263.04 members £274.00 non-members

IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 13765-4:2004 Determination of flexural bonding strength £35.52 members £37.00 non-members

ISO/IEC TR 14496-9:2004 (CD-ROM) Reference hardware description

RPI/1 ISO 13584-25:2004 (CD-ROM)

IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/IEC 14496-2:CORRIGENDUM 1:June 2004 IST/37

ISO/IEC 14496-2:2004 (CD ROM) (Edition 3) Visual

£28.80 members £30.00 non-members

Collection of graphical symbols for office equipment £0.00 members £0.00 non-members

ISO/IEC 14496-2:Visual

Will be implemented as an identical British Standard

£71.04 members £74.00 non-members

IST/37 Will be implemented as an identical British Standard

ISO 13765-5:2004 Determination of grain size distribution (sieve analysis) £35.52 members £37.00 non-members

ISO/IEC 14496-19:2004 Synthesized texture stream

RPI/1 Will be implemented as an identical British Standard

£133.44 members £139.00 non-members

IST/37 Will be implemented as an identical British Standard

ISO 13695:2004 Optics and photonics. Lasers and laser related equipment. Test methods for the spectral characteristics of laser £75.84 members £79.00 non-members CPW/172 Will be implemented as an identical British Standard

ISO 13765-6:2004

ISO 14728:-

Determination of moisture content of ready-mixed mortars £25.92 members £27.00 non-members

Rolling bearings. Linear motion rolling bearings

RPI/1 Will be implemented as an identical British Standard

ISO 14174:2004 ISO 13765:Refractory mortars

Welding consumables. Fluxes for submerged arc welding. Classification £49.92 members £52.00 non-members

WEE/39 Will not be implemented as a British Standard

ISO 14728-1:2004 Dynamic load ratings and rating life £28.80 members £30.00 non-members

MCE/7 Will be implemented as an identical British Standard

ISO 14728-2:2004 Static load ratings £49.92 members £52.00 non-members

MCE/7 Will be implemented as an identical British Standard Page 50 of 53

ISO/IEC 15423:2004

ISO 15859-3:2004 Nitrogen

Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing £93.12 members £97.00 non-members

ISO/IEC 15018:2004 Information technology. Generic cabling for homes £124.80 members £130.00 non-members

TCT/7

ACE/68/-/3

IST/34

Will not be implemented as a British Standard

Will be implemented as an identical British Standard

ISO 15379:-

ISO 15531:-

Carbonaceous materials for the production of aluminium. Cathode block materials

Industrial automation systems and integration. Industrial manufacturing management data

ISO 15379-1:2004

£45.12 members £47.00 non-members

ISO 15531-31:2004 Resource information model

Determination of the expansion due to sodium penetration with application of pressure £35.52 members £37.00 non-members

£80.64 members £84.00 non-members

CII/24 Will be implemented as an identical British Standard

AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 15749:ISO 15379-2:2004

Ships and marine technology. Drainage systems on ships and marine structures

Determination of the expansion due to sodium penetration without application of pressure £35.52 members £37.00 non-members

ISO 15749-4:2004

CII/24 Will be implemented as an identical British Standard

ISO 15390:2004 Space environment (natural and artificial). Galactic cosmic ray model £35.52 members £37.00 non-members

Sanitary drainage, sewage disposal pipes £57.60 members £60.00 non-members SME/32 Will be implemented as an identical British Standard

ISO 15859:-

ACE/68 Will be implemented as an identical British Standard

ISO/IEC 15415:2004 Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Two-dimensional symbols £102.72 members £107.00 non-members IST/34 Will not be implemented as a British Standard

Space systems. Fluid characteristics, sampling and test methods

ISO 15859-1:2004 Oxygen £45.12 members £47.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-2:2004 Hydrogen £40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-4:2004 Helium £40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-5:2004 Nitrogen tetroxide propellant £35.52 members £37.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-6:2004 Monomethyl hydrazine propellant £35.52 members £37.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-7:2004 Hydrazine propellant £40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-8:2004 Kerosene propellant £40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-9:2004 Argon £40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

ISO 15859-10:2004 Water £45.12 members £47.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

Page 51 of 53

ISO 16656:2004 ISO 15859-11:2004 Ammonia

ISO/TR 16056-1:2004 Introduction and definitions

£35.52 members £37.00 non-members

£62.40 members £65.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

IST/35

Hydraulic fluid power. Single rod space-saving cylinders 10 MPa (100 bar). Mounting dimensions £28.80 members £30.00 non-members MCE/18/-/3

ISO 16820:2004 ISO 15859-12:2004 Carbon dioxide

ISO/TR 16056-2:2004 Real-time systems

£28.80 members £30.00 non-members

£97.92 members £102.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

Sensory analysis. Methodology. Sequential analysis £45.12 members £47.00 non-members

AW/12 IST/35

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO 17082:2004 ISO 15859-13:2004 Breathing air

ISO/TS 16058:2004

£40.32 members £42.00 non-members

ACE/68/-/3 Will be implemented as an identical British Standard

Health informatics. Interoperability of telelearning systems £93.12 members £97.00 non-members

IST/35 Will be implemented as an identical British Standard

Pneumatic fluid power. Valves. Data to be included in supplier literature £35.52 members £37.00 non-members MCE/18/-/5 Will be implemented as an identical British Standard

ISO 17282:2004 (CD-ROM)

ISO/IEC 15938:Information technology. Multimedia content description interface

ISO/IEC 15938-1:Systems CORRIGENDUM 1:June 2004 to ISO/IEC 15938-1:2002

ISO 16462:2004 Cubic boron nitride (BN) inserts, tipped or solid. Dimensions, types £62.40 members £65.00 non-members MTE/18 Will be implemented as an identical British Standard

IST/37 Will be implemented as an identical British Standard

Space systems. Spacecraft interface requirements document for launch vehicle services £71.04 members £74.00 non-members

Polycrystalline diamond inserts, tipped. Dimensions, types £52.80 members £55.00 non-members

Information technology. International symbology specification. Data matrix CORRIGENDUM 1:May 2004 to ISO/IEC 16022:2000

PRI/21 Will be implemented as an identical British Standard

ISO 17401:2004 ISO 16463:2004

ISO/IEC 16022:-

Plastics. Guide to the acquisition and presentation of design data £124.80 members £130.00 non-members

ACE/68

MTE/18

IST/34 Will be implemented as an identical British Standard

ISO 16053:2004

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO 16549:2004

ISO 17624:2004

Textiles. Unevenness of textile strands. Capacitance method £45.12 members £47.00 non-members

Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens £52.80 members £55.00 non-members

TCI/24

Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test £66.24 members £69.00 non-members

EH/1/3

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO 16650:2004 Bead wire

ISO/TR 17671:-

Will not be implemented as a British Standard

£45.12 members £47.00 non-members

Welding. Recommendations for welding of metallic materials

ISO/TR 16056:-

Will not be implemented as a British Standard

STI/28

ISE/26

Health informatics. Interoperability of telehealth systems and networks Page 52 of 53

ISO/TR 17671-7:2004 Electron beam welding

ISO/IEC 19752:2004

£88.32 members £92.00 non-members

WEE/-/1 Will not be implemented as a British Standard

ISO 17846:2004 Welding and allied processes. Health and safety. Wordless precautionary labels for equipment and consumables used in arc welding and cutting £62.40 members £65.00 non-members WEE/40 Will not be implemented as a British Standard

Information technology. Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that may contain printer components £66.24 members £69.00 non-members ISTIECCT/Will not be implemented as a British Standard

ISO 21389:2004

Ergonomic procedures for the improvement of local muscular workloads

Oil of gum turpentine, Chinese type (mainly from $7IPinus massoniana$7R Lamb.) £35.52 members £37.00 non-members AW/54 Will be implemented as an identical British Standard

Guidelines for reducing local muscular workloads £62.40 members £65.00 non-members

Natural gas. Correlation between water content and water dew point £71.04 members £74.00 non-members

PH/9/4 PTI/15

ISO 21048:2004 Plastics. Epoxy resin. Determination of 1,2-glycol content £35.52 members £37.00 non-members

Rubber. Guide to the calibration of test equipment £57.60 members £60.00 non-members

PRI/82 PRI/20

Will not be implemented as a British Standard

ISO 22188:2004

ISO/TR 21089:2004

Monitoring for inadvertent movement and illicit trafficking of radioactive material £88.32 members £92.00 non-members

Will be implemented as an identical British Standard

ISO 19018:2004 Ships and marine technology. Terms, abbreviations and graphical symbols and concepts of navigation £75.84 members £79.00 non-members SME/32/9 Will not be implemented as a British Standard

Health informatics. Trusted end-to-end information flows £102.72 members £107.00 non-members

NCE/2 IST/35

ISO/IEC 24703:2004 Information technology. Participant identifiers £0.00 members £0.00 non-members

ISO/TR 21092:2004 Essential oils. Characterization

IST/43 AW/54

Geographic information. Positioning services £109.44 members £114.00 non-members

Will be implemented as an identical British Standard

IST/36

Will not be implemented as a British Standard

Will be implemented as an identical British Standard

£52.80 members £55.00 non-members

ISO 19116:2004

Will be implemented as an identical British Standard

ISO 21530:2004 Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants £49.92 members £52.00 non-members CH/106/6 Will be implemented as an identical British Standard

Will not be implemented as a British Standard

Will not be implemented as a British Standard

ISO 18899:2004

Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale £52.80 members £55.00 non-members CII/60 Will be implemented as an identical British Standard

ISO/TS 20646:-

ISO/TS 20646-1:2004 ISO 18453:2004

ISO 21270:2004

Will be implemented as an identical British Standard

ISO 21207:2004 Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure for corrosion-promoting gases, neutral salt-spray and drying £45.12 members £47.00 non-members ISE/NFE/8 Will not be implemented as a British Standard Page 53 of 53