BS EN 438

Technical Data Physical Properties of Sunlite & Litespal Solid Laminate 13mm BS EN 438 : part 1 TEST

Property

Test Method Part 2

Property Or Attributes

Thickness

4

Variation (max)

Appearance and Flatness Resistance To Surface Wear

5

Warp (max) Initial Point (IP) Wear resistance = IP + FP 2 Mass Increase (max) Thickness Increase (max) Appearance (not worse than) Appearance (not worse than) Gloss Others Dimensional Change(max): Cross-Machine Machine

6 Resistance To Immersion In Boiling Water

7

Resistance To Dry Heat 8 Dimensional Stability At Elevated Temperatures Resistance To Impact By Large Diameter Ball Resistance To Scratching Resistance To Staining

9 12#

Spring Force

14

Load Covered Appearance (not worse than): Group 1& 2 Group 3 & 4 Uncovered Appearance (not worse than): Group 1& 2 Group 3 & 4

15

Resistance To Colour Change In Xenon Arc Light Resistance To Cigarette Burns Resistance To Steam Resistance To Crazing Resistance To Moisture ISO 178 Flexural Strength ISO 178 Flexural Modulus ISO/R 527 Tensile Strength

16 18 24 26 27 ----

Wool Standard (minimum) Appearance (not worse than) Appearance (not worse than) Appearance (not worse than) Appearance (not worse than)

Laminate CGS

< 5mm ≧150 revs ≧350 revs

Test Result Sunlite & Litesapl + 0.164mm - 0.00mm 1800

≧2.0N

>2.0N

5 4

5,5 5,5,5

5 4

5,5 5,5,5,4

6

>6

3

5,5,5

4

4

5

5

4

4

10,000 100 70

11,246 N/mm2 134.8 N/mm2 95.9 N/mm2