The Holiday Inn Express,. Warwick. Approx. ... Roger Talbot, Service Co-
ordinator ... Course objective: Working with the hydraulic circuit diagram, knowl-
edge of ...
Great Britain
Customer Training
www.arburg.co.uk
2017
Introduction
Dear Customer, The trademark of the ARBURG ALLROUNDER is its versatility and flexibility. It is important therefore that you, the end user, should be able to obtain a full understanding and appreciation of its full capability.
For this particular reason ARBURG Ltd have put together this booklet to offer you and your technicians the possibility of participating in training courses which will enable you to acquire all the skills required to work with the ALLROUNDER range of injection moulding machines.
Contained within this booklet is the current ARBURG training programme subdivided into different courses according to your specific requirements. These courses cover a wide cross section of disciplines from the general practice of injection moulding through to in depth theoretical and ‘hands on’ training on the machines.
Should you have questions or require any further information please do not hesitate to contact us.
Yours faithfully
Colin Tirel Managing Director ARBURG LIMITED
3
General Information
Courses are arranged according
Note:
to demand. Please Email your
All courses are available subject
request to
[email protected] or
to machine availability and a
telephone 01926 457000
minimum number of participants having registered.
Times and Duration for courses at Warwick:
Should you require advice on
Day 1: 9.30–16.30
the suitability of courses for your
Day 2: 9.30–16.30
requirements please contact either Mr. R Hambrook (Service Manager)
Times and Duration for courses
or Mr. Derek Cheetham (Applica-
at customer’s premises:
tions Engineer). General course
Dependant on course and location.
enquiries should be made to Donna White.
Costs: One day course at ARBURG Ltd
All enquiries regarding training
£ 250.00 per delegate & VAT sub-
at customer premises should be
ject to a minimum of 3 attendees.
made to Mr. R Hambrook.
Two day course at ARBURG Ltd. £ 400.00 per delegate & VAT. Includ-
Special bespoke machine training
ed in the price is a detailed course
courses or information seminars
book, lunch and beverage subject to
can be arranged for individual
a minimum of 3 attendees.
customers at our facility at a cost of £ 650 per day irrespective of
Two day course conducted at cus-
number of personnel but a maxi-
tomer premises in Wales and Eng-
mum of 6 is recommended.
land £ 1300.00 per course & VAT. Worldwide standards: Training courses conducted at
ARBURG places high demands
customer premises in Ireland and
on its trainers. All our courses are
Scotland prices upon request.
carried out according to a unified
Course enquiries are also possible
standard worldwide.
via our website.
4
Local Hotel Information
Accommodation:
The Falstaff, Leamington Spa
We have listed for your informa-
Approx. 2 miles from ARBURG Ltd
tion a list of local hotels and
Tel.: 01926 312044
contact telephone/fax numbers.:
Fax: 01926 450574
It is the customer’s responsibility to arrange their accommodation
The Holiday Inn Express,
and the payment of same.
Warwick Approx. 4 miles from ARBURG Ltd
In the case of late bookings we
Reservations: 0800 897121
can of course assist with hotel booking but on the strict un-
The Angel, Leamington Spa
derstanding that hotel costs will
Approx. 2 miles from ARBURG Ltd
be settled by the customer on
Tel.: 01926 881296
departure. Woodland Grange, Approx. 4 miles from ARBURG Ltd Tel.: 01926 336621
5
Training Place/Address/Contact List
ARBURG Ltd Warwick
ARBURG Ltd
ARBURG Ltd
Tachbrook Park Drive
Sales Department: 01926 457001
Warwick CV34 6RH
Simon Wrighton, Sales Director
Tel.: 01926 457000
David Kenny, New M/C Sales
Fax: 01926 457030
Vince Crossan, New M/C Sales
www.arburg.co.uk E-Mail:
[email protected]
Spares Department: 01926 457021
[email protected]
Darren Hunt, Spares
[email protected] Service Department: 01926 457031 Robin Hambrook, Service Manager Roger Talbot, Service Controller Kim Sharpe, Internal Customer Service Engineer, Stephen RedmanWindsor, Service Contract and Support Administrator
General: 01926 457000 Colin Tirel, Managing Director Lorraine McSharry, Finance Controller Donna White, PA to the directors
6
Derek Cheetham, Applications Eng.
Courses
Overview
Machine
G
Basic courses
p. 10
Introductory course on machine operation
M
Machine adjustment courses
p. 11
Main course on machine adjustment and programming Service
SC
Service training
p. 12-13
Electrical and hydraulic machine appreciation course Technology
KT
Plastics technology course
p. 14
Clamp and injection data c onsiderations and applications One-day seminar
I
Information seminar
p. 15
One-day seminars on the SELOGICA control and ARBURG ALS host computer system Automation
HP
Courses on robotic systems
p. 16
Six-axis robotic systems, MULTILIFT V / MULTILIFT SELECT, MULTILIFT H
We are also pleased to offer individualised courses upon request, with customer-specific content. These courses can be held either at your premises or at ARBURG.
7
G
Basic courses
Course description Course objective: Basic principles of injection moulding machines and control systems Target group: Those new to the injection moulding sector, machine operators Prerequisites: No previous knowledge required Course duration: 2 days Course fee: £ 400.00 Documents: Course folder with accompanying texts and CD
Note: To enhance your knowledge, we also recommend participation in the machine adjustment courses
Course content • Design of the injection moulding machine • Injection moulding process • Basic principles of the control system and the control panels • Typical plastics processing requirements • Practical situations: starting / ending the injection moulding process, troubleshooting / fault remedy, mould changes, changing the moulding material with cylinder and screw cleaning • Machine maintenance
8
Machine
Control
Code
ALLROUNDER A
SELOGICA direct
G-A d
ALLROUNDER E
SELOGICA direct
G-E
ALLROUNDER H
SELOGICA direct
G-H
ALLROUNDER GE
SELOGICA direct
G-GE
ALLROUNDER S
SELOGICA direct
G-S
M
Machine adjustment courses
Course description Course objective: Adjustment an injection moulding machine independently Target group: Installation technicians, machine operator Prerequisites: Basic knowledge of injection moulding Course duration: 3 days Course fee: £ 600.00 Documents: Course folder with accompanying texts and CD
Course content • Typical machine features • Programming the control system • Setting up the clamping unit and the injection unit • Adopting the set values • Quality monitoring and data recording / backup • Machine maintenance
Machine
Control
Code
ALLROUNDER A
SELOGICA direct
M-A d
ALLROUNDER E
SELOGICA direct
M-E
ALLROUNDER H
SELOGICA direct
M-H
ALLROUNDER GE
SELOGICA direct
M-GE
ALLROUNDER S
SELOGICA direct
M-S
9
SC H/M
Service courses hydraulics / mechanics
Course description Course objective: Working with the hydraulic circuit diagram, knowledge of the hydraulic machine sequence, fast fault detection and rectification Target group: Service personnel, fitters, electricians, electronics engineers Prerequisites: Basic knowledge of hydraulics, mechanics Course duration: 2 days Course fee: £ 400.00 Documents: Course folder with accompanying text and data medium
Course content • Explanation of the hydraulic circuit diagram • Explanation of the most important function screens of the SELOGICA and SELOGICA direct control system • Pump control • Operating principle of the injection and clamping units • Regulating valves • Measurement and diagnostic options
Machine
Control
Code
ALLROUNDER S
SELOGICA direct
SCS H/M
10
SC EL
Service courses electrics, electronics
Course description Course objective: Working with the electric circuit diagram, knowledge of the electric machine sequence, fast fault detection and rectification Target group: Service personnel, electricians, electronics engineers Prerequisites: Knowledge of electrics and electronics Course duration: 2 days Course fee: £ 400.00 Documents: Course folder with accompanying text and data medium
Course content • Explanation of the electric circuit diagram • Explanation of the most important function screens of the SELOGICA and SELOGICA direct control system • Machine sequence, block diagrams • Regulating valves • Measurement and diagnostic options
Machine Control Code ALLROUNDER S
SELOGICA direct
SCS EL
11
KT 1
Plastics technology courses Injection moulding materials / injection moulding processs
Course description Course objective: Introduction to injection moulding materials and processing Target group: Installation technicians, machine operators, production managers, controllers, sales, designers, planners Prerequisites: Basic knowledge of injection moulding and injection moulding materials Course duration: 2 days Course fee: £ 400.00 Documents: Course folder with accompanying texts and CD
Course content Injection moulding materials • Structure / properties of the plastics • Condition ranges / fine structure of plastics • Overview of the most important plastics
Injection moulding process • Design of the injection moulding machine • Various injection moulding processes • Process parameters and their influence on moulded parts
Technology Code Injection moulding materials / injection moulding process
12
KT 1
I SEL
SELOGICA information seminars
Course description Seminar objectives: Familiarisation with the SELOGICA / SELOGICA direct user interface Target group: The seminars are aimed at all those wishing to familiarise themselves with the advantages of the SELOGICA / SELOGICA direct control systems Seminar duration: 1 day (9.00 a.m. - 3 p.m.) per seminar Tuition fee: Free of charge Documents: Detailed seminar documentation
Course content • Requirements on the plastic parts • Influence of the injection moulding machine on the moulded parts • Design of the injection unit and clamping unit • Function of the control hydraulics of the SELOGICA / SELOGICA direct control system (control and operating concepts, selection and configuration of mould, product and order-specific machine equipment, sequence programming, machine movement parameter programming, programming monitoring / documentation / help functions, examples of programming steps when setting up the mould, summary of the SELOGICA / SELOGICA direct control system)
Subject Code SELOGICA direct control system options
I SEL d
13
RP ML
Course on robotic systems MULTILIFT Programmer - Level 1
Course description Course objective: Unaided programming of the ARBURG robotic system MULTILIFT V, SELECT and H Target group: Programmers of MULTILIFT robotic systems Requirements: Basic knowledge in the operation of injection moulding machines Course duration: 3 days Course fee: £ 600.00 Documents: Course folder and CD
Course content • Operation of the vertically (V) operating MULTILIFT V or the horizontally (H) operating MULTILIFT H • Programming of the MULTILIFT on ALLROUNDERs • Various practical applications: teach-in programming, programming of sequences, patterned part set-down and monitoring functions • Function description of the inputs and outputs • Data set management • Maintenance and inspections of the safety equipment
Robotic system
Control
Code
MULTILIFT V, SELECT
SELOGICA ‘direct’
RP ML-V1
14
Location map
N W
te
sco
Em
E
Rd
A445
A425
Rd
Old Warwick Rd
A452
A452
ARBURG Ltd. Tachbrook Park Drive | Warwick CV34 6RH ARBURG Ltd Tachbrook Park Drive Warwick CV34 6RH Tel.: 01926 457000 Fax: 01926 457030 www.arburg.co.uk E-Mail:
[email protected]
16
A425
y
St ra tfo rd
M40
Myton
Rd
Rd
A429
g ur nb Ba
2000 ft
Euro pa W a
S 1 km
52.27339, -1.54449
Fax
Enrolment for Training Course
To: ARBURG Ltd, Donna White +44 (0) 1926 457020 or post (in separate envelope) to: ARBURG Ltd, Tachbrook Park Drive, Warwick, CV34 6RH, Attention: Donna White
from: (please complete this form) Company: Address:
Telephone:
Fax:
Customer number: I/We will arrive on: and depart on: Course
Date
Participant`s Names
Your signature is an acceptance to our non-liability with regard to personal damage within our premises
Date Signature
O/N Position
ARBURG GmbH + Co KG Arthur-Hehl-Strasse · 72290 Lossburg · Tel.: +49 7446 33-0 · www.arburg.com · E-Mail:
[email protected] With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates | America: Brazil, Mexico, USA For more information, please go to www.arburg.com.
© 2016 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KG DIN EN ISO 9001 + 14001 + 50001 certified
680017_GB_092016 · Subject to alterations Printed in Germany
Spain, Czech Republic, Turkey, Hungary | Asia: People’s Republic of
