1 Jul 2013 ... Kingspan Aquazone. 1000.CPR.2013.Aquazone.001. 1. Unique identification
code of the product- ... EN 12311-1. EN 12311-1. EN 12311-1.
Declaration of Performance Kingspan Aquazone 1000.CPR.2013.Aquazone.001 1. 2.
3.
4.
5.
6.
7.
8.
Unique identification code of the product-type Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11(4) Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11(5) Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2) System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V In case of the declaration of performance concerning a construction product covered by a harmonised standard In case of the declaration of performance concerning a construction product for which a European Technical Assessment has been issued
Kingspan Aquazone ® See CE mark label and marking on rolls
Water-flow reducing layer for inverted roofs
Kingspan Insulation Pembridge Leominster Herefordshire HR6 9LA Not Relevant
AVCP 3
EN 13859-2:2010 SHR NL (NB 1686) performed ITT under AVCP 3 and issued reports -
9. Declared performance
Reaction to fire Water vapour transmission (sd) Flexibility at low temperature Water tightness Max. tensile force (MD) Elongation at max. tensile force Maximum tensile force (XD) Elongation at max. tensile force (XD) Resistance to tearing MD (nail shank) Resistance to tearing XD (nail shank) Artificial ageing by UV and heat
Performance E Nominal 0.01m
Min. 0.003
Max. 0.025
-40°C (Max.) Class W1 Nominal Min. 310 N/50mm 260 17% 12% 310 N/50mm 260 20% 55N 50N
Water tightness Maximum tensile force in MD MD elongation at max. tensile force Maximum tensile force in XD XD elongation at max. tensile force
14% 35N 30N
Harmonised technical specification EN 11925-2 EN 12570 EN 1109 EN 1928 (A)
Max. 360 22% 360 26% 75N 70N
Residual value Class W1 80% 70% 80% 70%
EN 13859-2:2010
Essential characteristics
EN 12311-1 EN 12311-1 EN 12311-1 EN 12311-1 EN 12311-1 EN 12311-1 EN 1297 & 1296 EN 1928 (A) EN 12311-1 EN 12311-1 EN 12311-1 EN 12311-1
Where pursuant to Article 37 or 38, the Specific Technical Documentation has been used, the requirements with which the product complies: Not relevant 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by:
UK / 1st July 2013 Peter Wilson Managing Director (name and function)