U.S. and the U.K. models of the Suzuki Intruder. 700-800 cc V-twins from 1985-on
. Table 1 lists the chassis numbers (VIN) for models covered in this manual.
CLYMER.
SUZUKI VS700-800 INTRUDER • 1985-1997 SERVICE • REPAIR • MAINTENANCE
QUICK REFERENCE DATA TIRE INFLATION PRESSURE (COLD)*
Psi 28
Load "Solo riding Dual riding
32
Tire Pressure Front Rear kPa 200 225
» Tire inflation pressure for factory equipped tires. Aftermarket tires may
kPa
psi 32 36
225 250
require different inflation pressure.
RECOMMENDED LUBRICANTS AND FLUIDS
Fuel U.S. and Canada U.K. and all others Engine oii Capacity Change "• Change and filter j> ""At overhaul C$dlanf * Capacity at change ^tt»al drive oil «. I ~ Capacity at change '• f rake fluid 'ulch hydraulic fluid -Hmtterf refilling 5hptnt fork oil capacity (each fork leg) 3 "i
Regular unleaded 87 [(R + M)/2 method] or 91 octane or higher 85-95 octane SAE 10W-40 API grade SE or SF 2.4 L (2-5 U.S. qtJ2,1 Imp. qt.) 2.8 L (3.0 U.S. qt J2.5 Imp. qt.)
3.3 L(3.5 U.S. qt/2.9 Imp. qt.) Ethylene glycol 1.7 L (1.8 U.S. qtJ1.5 imp. qt.) SAi 90 hypoid gear oil with GL-5 under API classification 2-2.2 m) (6.8-7.0 U.S. qt J7.4-7.7 Imp. qt.) DOT 4 DOT 3 or DOT 4 Distilled water SAE 10W
981
,^- Right-hand fork ; Left-hand forte
388 ml 370 ml
12.1 oz. 12.5 oz.
383 mi 394 ml 386 ml 412ml
13.4 oz. 13.8 oz. 13.5 oz. 14.502,
"'t 1985-1989 t990-1991
153 mm
6.02 in.
UJS. and U.K. Canada 1992-1993 y U.S., Canada and U.K. ' 1994-on J^»rk oH type Cables and pivot points
