Update Standards - February 2009 - BSI Shop

British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

Building and civil engineering BS 1722 .............................................................18 BS 5228 ...............................................................6 BS 5385 ...............................................................6 BS 5400 ...............................................................8 BS 5422 ...............................................................6 BS 5950 ...............................................................8 BS 5975 ...............................................................6 BS 6100 .........................................................6, 19 BS 6375 .........................................................6, 19 BS EN 817 ............................................................8 BS EN 832 ....................................................11, 19 BS EN 1090 ..........................................................8 BS EN 1170 ..........................................................8 BS EN 1999 ........................................................17 BS EN ISO 9346 .................................................10 BS EN ISO 10456 ...............................................10 BS EN 12046 ......................................................19 BS EN ISO 13370 ...............................................11 BS EN ISO 13786 ...............................................11 BS EN ISO 13790 .........................................11, 19 BS EN ISO 14683 ...............................................11 BS EN 15564 ......................................................12 DD ENV 1090 ......................................................8 DD ENV 1170 ......................................................8 PD 6688 .............................................................16 NA to BS EN 1991 ...............................................8 NA to BS EN 1993 ...............................................8

Consumer products and services DD CEN ISO/TS 12780 .......................................16 DD CEN ISO/TS 12781 .......................................16 BS EN ISO 663 .....................................................8 BS EN 1972 ........................................................18 BS EN ISO 11553 ...............................................10 BS EN 13427 ......................................................20 BS EN 13428 ......................................................20 BS EN 13429 ......................................................20 BS EN 13430 ......................................................20 BS EN 13431 ......................................................20 BS EN 13432 ......................................................20 BS EN 15587 ......................................................12 BS EN 15662 ......................................................12 BS EN 50131 ......................................................12 BS ISO 1496 .......................................................14 BS ISO 6488 .......................................................17 BS ISO 8260 .......................................................14 BS ISO 9231 .......................................................14 BS ISO 9838 .......................................................14 BS ISO 22634 .....................................................15 DD ISO/TS 15530 ...............................................16 DD ISO/TS 16610 ...............................................16 DD ISO TS 17837 ...............................................16 DD ISO/TS 21872 ...............................................17 DD CLC/TS 50131 ..............................................12 PD CEN/TR 13695 ..............................................20 PD ISO/TR 22305 ...............................................16

Electrotechnical BS 6739 ...............................................................6 BS 7609 .............................................................17 DD CEN ISO/TS 25110 .......................................16 BS EN 60317 ......................................................12 BS EN 60384 ......................................................20 BS EN 60745 ......................................................17 BS EN 60927 ......................................................17 BS EN 61000 ................................................12, 20 BS EN 61326 ................................................12, 20 BS EN 62233 ......................................................17 BS EN 131800 ....................................................20 PD ISO/TR 28682 ...............................................16

4

Engineering BS 499 .................................................................6 BS 1640 .......................................................10, 19 BS 3726 .......................................................15, 19 BS 4436 .......................................................15, 19 BS 4515 ...............................................................6 BS 5663 .......................................................14, 19 BS 5892 .............................................................17 BS 6102 .............................................................18 BS 6644 .............................................................17 DD CEN/TS 15810 ..............................................16 BS EN 378 ..........................................................17 BS EN 792 ....................................................17, 18 BS EN ISO 945 .....................................................8 BS EN 1330 ..................................................10, 19 BS EN 1715 ....................................................8, 19 BS EN ISO 2320 ...................................................8 BS EN ISO 8468 .................................................14 BS EN 10253 ................................................10, 19 BS EN ISO 10414 ...............................................10 BS EN 12077 ......................................................18 BS EN ISO 12718 .........................................10, 19 BS EN 14015 ......................................................20 BS EN 14025 ......................................................17 BS EN ISO 14310 ...............................................11 BS EN 14394 ......................................................18 BS EN 14502 ......................................................18 BS EN 14620 ................................................20, 21 BS EN 15001 ......................................................11 BS EN 15532 ......................................................12 BS EN 15611 ......................................................12 BS EN 15612 ......................................................12 BS EN ISO 17660 ...............................................17 BS EN ISO 24598 ...............................................12 BS ISO 2597 .......................................................14 BS ISO 4701 .................................................14, 19 BS ISO 5598 .......................................................14 BS ISO 6104 .......................................................18 BS ISO 7689 .................................................14, 20 BS ISO 8468 .................................................14, 20 BS ISO 8642 .................................................14, 20 BS ISO 10071 .....................................................14 BS ISO 10414 .....................................................10 BS ISO 11903 .....................................................14 BS ISO 12164 .....................................................14 BS ISO 14347 .....................................................15 BS ISO 14612 ...............................................14, 20 BS ISO 16528 .....................................................15 BS ISO 21278 .....................................................15 BS ISO 22915 ...............................................15, 19 BS ISO 24394 .....................................................15 BS ISO 27991 .....................................................16 DD ISO/TS 16281 ...............................................16 DD ISO/TS 19072 ...............................................16 PD 8010 .............................................................16 PD ISO/TR 29381 ...............................................16 BS A 298 ......................................................14, 20 BS A 300 ......................................................14, 20 BS 3G 100 ..........................................................19

Health and environment BS BS BS BS BS BS BS BS BS BS BS BS BS BS

476 .................................................................6 1427 ...............................................................6 2740 .............................................................19 2741 .............................................................19 2811 .............................................................19 6068 .......................................................14, 19 7251 .......................................................14, 19 EN 533 ....................................................11, 19 EN 1634 ..........................................................8 EN 1809 ........................................................18 EN ISO 3826 ...................................................8 EN ISO 7197 .................................................10 EN ISO 9241 .................................................10 EN ISO 10993 ...............................................10

Prices may be subject to change.

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN ISO 11348 ...............................................10 EN 12180 ................................................11, 19 EN 12628 ......................................................18 EN 13319 ......................................................18 EN ISO 14116 .........................................11, 19 EN 14491 ......................................................17 EN 14563 ......................................................11 EN ISO 14607 .........................................11, 19 EN ISO 14630 ...............................................11 EN ISO 15088 ...............................................12 EN 15483 ......................................................12 EN ISO 16000 ...............................................12 ISO 7197 .......................................................10 ISO 7207 .................................................14, 19 ISO 9697 .................................................14, 19

Information systems BS BS BS BS BS BS BS BS BS BS BS

EN ISO 9409 .................................................18 EN 14890 ......................................................11 EN 61784 ......................................................12 ISO 2108 .......................................................18 ISO/IEC 11695 ...............................................14 ISO 13606 .....................................................15 ISO/IEC 14651 ...............................................15 ISO/IEC 18014 ...............................................15 ISO/IEC 18045 ...............................................15 ISO/IEC 24727 ...............................................15 ISO/IEC 24751 ...............................................15

Management systems BS EN 15707 ......................................................12 BS ISO 25639 .....................................................15

Materials and chemicals BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

490 ...............................................................19 7079 ...............................................................6 EN ISO 217 .....................................................8 EN 644 ......................................................8, 19 EN 901 ............................................................8 EN 1017 ..........................................................8 EN ISO 1403 ...................................................8 EN 1715 ....................................................8, 19 EN ISO 4320 .................................................20 EN ISO 4611 .................................................10 EN ISO 6224 .................................................10 EN ISO 6802 ...........................................10, 20 EN ISO 10350 ...............................................10 EN ISO 10472 ...............................................10 EN 12139 ......................................................20 EN 12174 ......................................................10 EN 12458 ......................................................20 EN 12582 ......................................................20 EN 12728 ......................................................20 EN 12974 ......................................................20 EN 14210 ......................................................20 EN 14370 ......................................................20 EN 14371 ......................................................20 EN 14480 ......................................................20 EN 14805 ......................................................11 EN 15028 ......................................................11 EN 15030 ......................................................11 EN 15039 ......................................................11 EN 15040 ......................................................11 EN 15041 ......................................................11 EN 15074 ......................................................11 EN 15075 ......................................................11 EN 15076 ......................................................11 EN 15077 ......................................................11 EN 15078 ......................................................11 EN 15363 ......................................................12 EN ISO 15403 ...............................................12 EN ISO 16851 .........................................17, 19 EN 26802 ................................................10, 20 ISO 12639 .....................................................15

Update Standards Feb 2009

British Standards - Quick Reference Guide continued... BS ISO 14594 .....................................................18 BS ISO 15403 .....................................................12 BS ISO 23830 .....................................................15 BS ISO 26987 .....................................................16 PD CEN/TR 15745 ..............................................16 PD CEN ISO/TR 24094 .......................................16

Alpha-numeric sequence of British Standards quoted in this issue BS 476 .................................................................6 BS 490 ...............................................................19 BS 499 .................................................................6 BS 1427 ...............................................................6 BS 1640 .......................................................10, 19 BS 1722 .............................................................18 BS 2740 .............................................................19 BS 2741 .............................................................19 BS 2811 .............................................................19 BS 3726 .......................................................15, 19 BS 4436 .......................................................15, 19 BS 4515 ...............................................................6 BS 5228 ...............................................................6 BS 5385 ...............................................................6 BS 5400 ...............................................................8 BS 5422 ...............................................................6 BS 5663 .......................................................14, 19 BS 5892 .............................................................17 BS 5950 ...............................................................8 BS 5975 ...............................................................6 BS 6068 .......................................................14, 19 BS 6100 .........................................................6, 19 BS 6102 .............................................................18 BS 6375 .........................................................6, 19 BS 6644 .............................................................17 BS 6739 ...............................................................6 BS 7079 ...............................................................6 BS 7251 .......................................................14, 19 BS 7609 .............................................................17 BS 25777 .............................................................8 BIP 0008 ............................................................17 BIP 0009 ............................................................17 DD CEN/TS 15810 ..............................................16 DD CEN ISO/TS 12780 .......................................16 DD CEN ISO/TS 12781 .......................................16 DD CEN ISO/TS 25110 .......................................16 BS EN ISO 217 .....................................................8 BS EN 378 ..........................................................17 BS EN 533 ....................................................11, 19 BS EN 644 ......................................................8, 19 BS EN ISO 663 .....................................................8 BS EN 792 ....................................................17, 18 BS EN 817 ............................................................8 BS EN 832 ....................................................11, 19 BS EN 901 ............................................................8 BS EN ISO 945 .....................................................8 BS EN 1017 ..........................................................8 BS EN 1090 ..........................................................8 BS EN 1170 ..........................................................8 BS EN 1330 ..................................................10, 19 BS EN ISO 1403 ...................................................8 BS EN 1634 ..........................................................8 BS EN 1715 ....................................................8, 19 BS EN 1809 ........................................................18 BS EN 1972 ........................................................18 BS EN 1999 ........................................................17 BS EN ISO 2320 ...................................................8 BS EN ISO 3826 ...................................................8 BS EN ISO 4320 .................................................20 BS EN ISO 4611 .................................................10 BS EN ISO 6224 .................................................10 BS EN ISO 6802 ...........................................10, 20 BS EN ISO 7197 .................................................10 BS EN ISO 8468 .................................................14 BS EN ISO 9241 .................................................10 BS EN ISO 9346 .................................................10 BS EN ISO 9409 .................................................18


BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN

10253 ................................................10, 19 ISO 10350 ...............................................10 ISO 10414 ...............................................10 ISO 10456 ...............................................10 ISO 10472 ...............................................10 ISO 10993 ...............................................10 ISO 11348 ...............................................10 ISO 11553 ...............................................10 12046 ......................................................19 12077 ......................................................18 12139 ......................................................20 12174 ......................................................10 12180 ................................................11, 19 12458 ......................................................20 12582 ......................................................20 12628 ......................................................18 ISO 12718 .........................................10, 19 12728 ......................................................20 12974 ......................................................20 13319 ......................................................18 ISO 13370 ...............................................11 13427 ......................................................20 13428 ......................................................20 13429 ......................................................20 13430 ......................................................20 13431 ......................................................20 13432 ......................................................20 ISO 13786 ...............................................11 ISO 13790 .........................................11, 19 14015 ......................................................20 14025 ......................................................17 ISO 14116 .........................................11, 19 14210 ......................................................20 ISO 14310 ...............................................11 14370 ......................................................20 14371 ......................................................20 14394 ......................................................18 14480 ......................................................20 14491 ......................................................17 14502 ......................................................18 14563 ......................................................11 ISO 14607 .........................................11, 19 14620 ................................................20, 21 ISO 14630 ...............................................11 ISO 14683 ...............................................11 14805 ......................................................11 14890 ......................................................11 15001 ......................................................11 15028 ......................................................11 15030 ......................................................11 15039 ......................................................11 15040 ......................................................11 15041 ......................................................11 15074 ......................................................11 15075 ......................................................11 15076 ......................................................11 15077 ......................................................11 15078 ......................................................11 ISO 15088 ...............................................12 15363 ......................................................12 ISO 15403 ...............................................12 15483 ......................................................12 15532 ......................................................12 15564 ......................................................12 15587 ......................................................12 15611 ......................................................12 15612 ......................................................12 15662 ......................................................12 15707 ......................................................12 ISO 16000 ...............................................12 ISO 16851 .........................................17, 19 ISO 17660 ...............................................17 ISO 24598 ...............................................12 26802 ................................................10, 20 50131 ......................................................12 60317 ......................................................12


BS EN 60384 ......................................................20 BS EN 60745 ......................................................17 BS EN 60927 ......................................................17 BS EN 61000 ................................................12, 20 BS EN 61326 ................................................12, 20 BS EN 61784 ......................................................12 BS EN 62233 ......................................................17 BS EN 131800 ....................................................20 DD ENV 1090 ......................................................8 DD ENV 1170 ......................................................8 BS ISO 1496 .......................................................14 BS ISO 2108 .......................................................18 BS ISO 2597 .......................................................14 BS ISO 4701 .................................................14, 19 BS ISO 5598 .......................................................14 BS ISO 6104 .......................................................18 BS ISO 6488 .......................................................17 BS ISO 7197 .......................................................10 BS ISO 7207 .................................................14, 19 BS ISO 7689 .................................................14, 20 BS ISO 8260 .......................................................14 BS ISO 8468 .................................................14, 20 BS ISO 8642 .................................................14, 20 BS ISO 9231 .......................................................14 BS ISO 9697 .................................................14, 19 BS ISO 9838 .......................................................14 BS ISO 10071 .....................................................14 BS ISO 10414 .....................................................10 BS ISO/IEC 11695 ...............................................14 BS ISO 11903 .....................................................14 BS ISO 12164 .....................................................14 BS ISO 12639 .....................................................15 BS ISO 13606 .....................................................15 BS ISO 14347 .....................................................15 BS ISO 14594 .....................................................18 BS ISO 14612 ...............................................14, 20 BS ISO/IEC 14651 ...............................................15 BS ISO 15403 .....................................................12 BS ISO 16528 .....................................................15 BS ISO/IEC 18014 ...............................................15 BS ISO/IEC 18045 ...............................................15 BS ISO 21278 .....................................................15 BS ISO 22634 .....................................................15 BS ISO 22915 ...............................................15, 19 BS ISO 23830 .....................................................15 BS ISO 24394 .....................................................15 BS ISO/IEC 24727 ...............................................15 BS ISO/IEC 24751 ...............................................15 BS ISO 25639 .....................................................15 BS ISO 26987 .....................................................16 BS ISO 27991 .....................................................16 DD ISO/TS 15530 ...............................................16 DD ISO/TS 16281 ...............................................16 DD ISO/TS 16610 ...............................................16 DD ISO TS 17837 ...............................................16 DD ISO/TS 19072 ...............................................16 DD ISO/TS 21872 ...............................................17 DD CLC/TS 50131 ..............................................12 PD CEN/TR 13695 ..............................................20 PD CEN/TR 15745 ..............................................16 PD CEN ISO/TR 24094 .......................................16 PD 6688 .............................................................16 PD 8010 .............................................................16 PD ISO/TR 22305 ...............................................16 PD ISO/TR 28682 ...............................................16 PD ISO/TR 29381 ...............................................16 BS A 298 ......................................................14, 20 BS A 300 ......................................................14, 20 BS 3G 100 ..........................................................19 NA to BS EN 1991 ...............................................8 NA to BS EN 1993 ...............................................8

5

British Standards

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute members.

BS 4515:—

BS 5975:2008

Specification for welding of steel pipelines on land and offshore

Code of practice for temporary works procedures and the permissible stress design of falsework

BS 4515-1:2009 Carbon and carbon manganese steel pipelines supersedes BS 4515-1:2004 ISBN 978 0 580 56892 3 £85.00 members, £170.00 non-members

B/514/26

WEE/21/7

Building and civil engineering. Vocabulary

BS 5228:— Code of practice for noise and vibration control on construction and open sites

BS 5228-1:2009 Noise supersedes BS 5228-1:1997, BS 5228-2:1997, BS 5228-3:1997, BS 5228-4:1992 and BS 52285:1997 ISBN 978 0 580 56048 4 £108.00 members, £216.00 non-members

BS 5228-2:2009 Vibration supersedes BS 5228-1:1997, BS 5228-2:1997, BS 5228-3:1997, BS 5228-4:1992 and BS 52285:1997 ISBN 978 0 580 56049 1 £85.00 members, £170.00 non-members B/564/1

BS 5385:—

Fire tests on building materials and structures

BS 5385-4:2009

BS 476-10:2009

Design and installation of ceramic and mosaic tiling in special conditions. Code of practice supersedes BS 5385-4:1992 ISBN 978 0 580 53245 0 £84.00 members, £168.00 non-members B/539

FSH/21

BS 499:— Welding terms and symbols

BS 499-1:2009 Glossary for welding, brazing and thermal cutting supersedes BS 499-1:1991 ISBN 978 0 580 58471 8 £108.00 members, £216.00 non-members

BS 6100-5:2009 Civil engineering. Water engineering, environmental engineering and pipe lines supersedes BS 6100-2.5:1991, BS 6100-2.6:1991 and BS 6100-2.7:1992 ISBN 978 0 580 53725 7 £85.00 members, £170.00 non-members B/500/-/1

BS 6375:— Performance of windows and doors

BS 6375-1:2009

BS 476:—

supersedes BS 476-10:1983 ISBN 978 0 580 56656 1 £75.00 members, £150.00 non-members

BS 6100:—

B/564/1

Wall and floor tiling

Guide to the principles, selection, role and application of fire testing and their outputs

supersedes BS 5975:1996+A2:2004 ISBN 978 0 580 57076 6 £118.00 members, £236.00 non-members

BS 5385-5:2009 Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice supersedes BS 5385-5:1994 ISBN 978 0580 50563 8 £85.00 members, £170.00 non-members B/539

Classification for weathertightness and guidance on selection and specification supersedes BS 6375-1:2004 ISBN 978 0 580 56202 0 £57.00 members, £114.00 non-members B/538/1

BS 6375-2:2009 Classification for operation and strength characteristics and guidance on selection and specification supersedes BS 6375-2:1987 ISBN 978 0 580 56203 7 £42.00 members, £84.00 non-members B/538/1

BS 6375-3:2009 Classification for additional performance characteristics and guidance on selection and specification no current standard is superseded ISBN 978 0 580 56204 4 £42.00 members, £84.00 non-members B/538/1

BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice supersedes BS 6739:1986 ISBN 978 0 580 55607 4 £123.00 members, £246.00 non-members GEL/65

WEE/1

BS 5422:2009 BS 7079:2009

Guide to on-site test methods for the analysis of waters

Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C

supersedes BS 1427:1993 ISBN 978 0 580 59059 7 £103.00 members, £206.00 non-members


supersedes BS 7079-0:1990 ISBN 978 0 580 59688 9 £40.00 members, £80.00 non-members

EH/3/2

B/540/7

STI/21

BS 1427:2009

6


General introduction to standards for preparation of steel substrates before application of paints and related products


British Standards continued... BS 25777:2008

BS EN 817:2008

BS EN 1634:—

Information and communications technology continuity management. Code of practice

Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications

no current standard is superseded ISBN 978 0 580 56239 6 £65.00 members, £130.00 non-members

supersedes BS EN 817:1998 ISBN 978 0 580 54901 4 £80.00 members, £160.00 non-members

Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware

BCM/1

B/504/8

NA to BS EN 1991:— UK National Annex to Eurocode 1. Actions on structures

NA to BS EN 1991-1-7:2006 Accidental actions no current standard is superseded ISBN 978 0 580 65468 8 £42.00 members, £84.00 non-members B/525/1

BS EN 901:2007 Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite supersedes BS EN 901:2000 ISBN 978 0 580 55189 5 £65.00 members, £130.00 non-members

BS EN 1634-2:2008 Fire resistance characterisation test for elements of building hardware no current standard is superseded ISBN 978 0 580 57505 1 £80.00 members, £160.00 non-members FSH/22/5

BS EN 1715:—

CII/59

Aluminium and aluminium alloys. Drawing stock

BS EN ISO 945:— Microstructure of cast irons

BS EN 1715-2:2008

NA to BS EN 1993:— UK National Annex to Eurocode 3. Design of steel structures

BS EN ISO 945-1:2008

Specific requirements for electrical applications

Graphite classification by visual analysis

NA to BS EN 1993-1-1:2005

supersedes BS EN ISO 945:1994 ISBN 978 0 580 55522 0 £57.00 members, £114.00 non-members

supersedes BS EN 1715-2:1998 ISBN 978 0 580 507006 3 £32.00 members, £64.00 non-members

General rules and rules for buildings no current standard is superseded ISBN 978 0 580 54960 1 £34.00 members, £68.00 non-members

ISE/35

B/525/31

Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite

NA to BS EN 1993-1-11:2006 Design of structures with tension components no current standard is superseded ISBN 978 0 580 54973 1 £32.00 members, £64.00 non-members B/525/31

BS EN 1017:2008


BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard.

BS EN 1090:—

PAI/11

NFE/35

BS EN ISO 2320:2008

BS EN 1090-2:2008


Technical requirements for the execution of steel structures supersedes DD ENV 1090-1:1998, DD ENV 10904:2001 and DD ENV 1090-6:2001 which are withdrawn, and BS 5400-6:1999 and BS 59502:2001 which remain current ISBN 978 0 580 55315 8 £114.00 members, £228.00 non-members B/521

FME/9/1

BS EN ISO 3826:— Plastics collapsible containers for human blood and blood components

BS EN ISO 3826-2:2008

BS EN 1170:—

BS EN 1170-8:2008 Cyclic weathering type test

Graphical symbols for use on labels and instruction leaflets no current standard is superseded ISBN 978 0 580 54429 3 £40.00 members, £80.00 non-members CH/212

supersedes DD ENV 1170-8:1997 ISBN 978 0 580 57649 2 £32.00 members, £64.00 non-members B/524

BS EN ISO 663:2008

BS EN ISO 1403:2008

Animal and vegetable fats and oils. Determination of insoluble impurities content

Rubber hoses, textile-reinforced, for generalpurpose water applications. Specification



AW/307

PRI/66

8


Prevailing torque type steel nuts. Mechanical and performance properties

BS EN ISO 217:2008


Specific requirements for mechanical uses (excluding welding)

Execution of steel structures and aluminium structures

Test method for glass-fibre reinforced cement

Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction

BS EN 1715-3:2008

CII/59

BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs).

NFE/35


e-mail your order [email protected]


BS EN Publications continued... BS EN ISO 4611:2008

BS EN ISO 10350:—

BS EN ISO 11348:—

Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics. Acquisition and presentation of comparable single-point data

Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)

supersedes BS EN ISO 4611:2001 ISBN 978 0 580 63455 0 £40.00 members, £80.00 non-members PRI/21

BS EN ISO 6224:2008

BS EN ISO 10350-1:2008 Moulding materials

BS EN ISO 11348-1:2008

supersedes BS EN ISO 10350-1:2001 ISBN 978 0 580 54447 7 £40.00 members, £80.00 non-members

Method using freshly prepared bacteria

Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification

PRI/21


BS EN ISO 10414:—

EH/3/5

Petroleum and natural gas industries. Field testing of drilling fluids

Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing supersedes BS EN 26802:1993 ISBN 978 0 580 54304 3 £32.00 members, £64.00 non-members

Method using liquid-dried bacteria

BS EN ISO 10414-1:2008 Water-based fluids

EH/3/5

supersedes BS ISO 10414-1:2001 ISBN 978 0 580 56015 6 £85.00 members, £170.00 non-members

BS EN ISO 11348-3:2008

PSE/17/-/3

Method using freeze-dried bacteria

BS EN ISO 10456:2007


PRI/66

Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components

Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values

supersedes BS ISO 7197:1997 ISBN 978 0 580 55457 5 £32.00 members, £64.00 non-members


CH/150/3

B/540

BS EN ISO 7197:2006

BS EN ISO 11348-2:2008 supersedes BS EN ISO 11348-2:1999 ISBN 978 0 580 54631 0 £57.00 members, £114.00 non-members

PRI/66

BS EN ISO 6802:2008


EH/3/5

BS EN ISO 11553:— Safety of machinery. Laser processing machines

BS EN ISO 11553-1:2008 General safety requirements

BS EN ISO 9241:— Ergonomics of human-system interaction

BS EN ISO 10472:— Safety requirements for industrial laundry machinery

CPW/172/9

BS EN ISO 9241-300:2008 Introduction to electronic visual display requirements no current standard is superseded ISBN 978 0 580 54340 1 £40.00 members, £80.00 non-members PH/9


BS EN ISO 10472-5:2008 Flatwork ironers, feeders and folders

BS EN ISO 11553-2:2008


Safety requirements for hand-held laser processing devices

TCI/33

BS EN ISO 9346:2007

supersedes BS EN ISO 11553-2:2007 ISBN 978 0 580 63747 6 £57.00 members, £114.00 non-members CPW/172/9

Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary

BS EN ISO 10472-6:2008



BS EN 12174:2006

B/540

TCI/33


BS EN ISO 10993:—

CII/59

Ironing and fusing presses

BS EN 10253:— Butt-welding pipe fittings

Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate

Biological evaluation of medical devices

BS EN 10253-3:2008 BS EN ISO 12718:2008

Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements

BS EN ISO 10993-7:2008 Ethylene oxide sterilization residuals

Non-destructive testing. Eddy current testing. Vocabulary

supersedes BS 1640-2:1962 and BS 1640-4:1968 ISBN 978 0 580 54047 9 £75.00 members, £150.00 non-members



ISE/19

CH/194

WEE/46

10



BS EN ISO 13370:2007

BS EN ISO 14683:2007

BS EN 15039:2006

Thermal performance of buildings. Heat transfer via the ground. Calculation methods

Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values

Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts



B/540

CII/59

supersedes BS EN ISO 13370:1998 ISBN 978 0 580 54938 0 £32.00 members, £64.00 non-members B/540

BS EN ISO 13786:2007 Thermal performance of building components. Dynamic thermal characteristics. Calculation methods supersedes BS EN ISO 13786:1999 ISBN 978 0 580 55074 4 £32.00 members, £64.00 non-members B/540

BS EN ISO 13790:2008 Energy performance of buildings. Calculation of energy use for space heating and cooling supersedes BS EN 832:2000 and BS EN ISO 13790:2004 ISBN 978 0 580 55359 2 £108.00 members, £216.00 non-members

BS EN 15040:2006 BS EN 14805:2008 Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology no current standard is superseded ISBN 978 0 580 54202 2 £65.00 members, £130.00 non-members CII/59

Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts no current standard is superseded ISBN 978 0 580 55000 3 £57.00 members, £114.00 non-members CII/59

BS EN 15041:2006

BS EN 14890:— Application interface for smart cards used as secure signature creation devices

B/540

Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates no current standard is superseded ISBN 978 0 580 55001 0 £32.00 members, £64.00 non-members CII/59

BS EN ISO 14116:2008

BS EN 14890-2:2008

Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing

Additional services


no current standard is superseded ISBN 978 0 580 58270 7 £85.00 members, £170.00 non-members IST/17

PH/3/2

BS EN ISO 14310:2008 Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs supersedes BS EN ISO 14310:2002 ISBN 978 0 580 58274 5 £65.00 members, £130.00 non-members

BS EN 15001:— Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations

PSE/17/-/4

BS EN 14563:2008 Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area. Test method and requirements (phase 2, step 2) no current standard is superseded ISBN 978 0 580 59608 7 £65.00 members, £130.00 non-members

BS EN 15001-2:2008


BS EN 15028:2006

BS EN ISO 14607:2007


CH/150

no current standard is superseded ISBN 978 0 580 55184 0 £32.00 members, £64.00 non-members CII/59

BS EN 15075:2006 Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate no current standard is superseded ISBN 978 0 580 55185 7 £32.00 members, £64.00 non-members CII/59

BS EN 15076:2006 Chemicals used for treatment of swimming pool water. Sodium hydroxide no current standard is superseded ISBN 978 0 580 55186 4 £32.00 members, £64.00 non-members

GSE/33

Chemicals used for treatment of water intended for human consumption. Sodium chlorate


Chemicals used for treatment of swimming pool water. Ozone

Detailed functional requirements for commissioning, operation and maintenance

CH/216

Non-active surgical implants. Mammary implants. Particular requirements

BS EN 15074:2006

CII/59

CII/59

BS EN 15077:2006 Chemicals used for treatment of swimming pool water. Sodium hypochlorite no current standard is superseded ISBN 978 0 580 55187 1 £32.00 members, £64.00 non-members CII/59

BS EN 15030:2006

Non-active surgical implants. General requirements

Chemicals used for treatment of water intended for human consumption. Silver salts for the conservation of drinking water for intermittent use




CH/150

CII/59

CII/59

BS EN ISO 14630:2008



BS EN 15078:2006 Chemicals used for treatment of swimming pool water. Sulfuric acid

11

BS EN Publications continued... BS EN ISO 15088:2008

BS EN 15612:2008

BS EN 50131-2-6:2008

Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)

Railway applications. Braking. Brake pipe accelerator valve

Opening contacts (magnetic)



Chemicals used for treatment of swimming pool water. Chlorine no current standard is superseded ISBN 978 0 580 56578 6 £32.00 members, £64.00 non-members CII/59

BS EN ISO 15403:— Natural gas. Natural gas for use as a compressed fuel for vehicles

BS EN ISO 15403-1:2008 Designation of the quality supersedes BS ISO 15403:2000 ISBN 978 0 580 65714 6 £57.00 members, £114.00 non-members

BS EN 60317:— BS EN 15662:2008 Foods of plant origin. Determination of pesticide residues using GC-MS and/or LC-MS/MS following acetonitrile extraction/partitioning and clean-up by dispersive SPE. QuEChERS-method no current standard is superseded ISBN 978 0 580 58441 1 £85.00 members, £170.00 non-members AW/-/3

Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy no current standard is superseded ISBN 978 0 580 56670 7 £85.00 members, £170.00 non-members EH/2/3

BS EN 15532:2008

GME/25

BS EN 15564:2008 Precast concrete products. Resin bound concrete. Requirements and test methods no current standard is superseded ISBN 978 0 580 57650 8 £57.00 members, £114.00 non-members B/524


Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 no current standard is superseded ISBN 978 0 580 55360 8 £32.00 members, £64.00 non-members

BS EN 61000:—

Print media surveys. Vocabulary and service requirements

Electromagnetic compatibility (EMC)


BS EN 61000-3-3:2008

SVS/3

Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

Indoor air

supersedes BS EN 61000-3-3:1995 which remains current ISBN 978 0 580 59102 0 £57.00 members, £114.00 non-members

BS EN ISO 16000-15:2008

GEL/210/12

BS EN ISO 16000:—

Sampling strategy for nitrogen dioxide (NO2) no current standard is superseded ISBN 978 0 580 56565 6 £40.00 members, £80.00 non-members

BS EN 61326:— Electrical equipment for measurement, control and laboratory use. EMC requirements

EH/2/3

BS EN 61326-3:— BS EN ISO 24598:2007 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels. Classification no current standard is superseded ISBN 978 0 580 55957 0 £57.00 members, £114.00 non-members WEE/39

Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety)

BS EN 61326-3-1:2008 General industrial applications supersedes BS EN 61326:1998 ISBN 978 0 580 54441 5 £79.00 members, £158.00 non-members GEL/65/1

BS EN 50131:—

BS EN 61326-3-2:2008

Alarm systems. Intrusion and hold-up systems

Industrial applications with specified electromagnetic environment

BS EN 15587:2008 Cereals and cereal products. Determination of Besatz in wheat (Triticuma estivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.)

BS EN 60317-55:2008

BS EN 15707:2008

Cycles. Terminology no current standard is superseded ISBN 978 0 580 56666 0 £75.00 members, £150.00 non-members

Specifications for particular types of winding wires

GEL/55

PTI/15

BS EN 15483:2008

GW/1/1

RAE/4

EH/3/5

BS EN 15363:2007

supersedes DD CLC/TS 50131-2-6:2004 ISBN 978 0 580 53018 0 £57.00 members, £114.00 non-members

BS EN 50131-2-3:2008 Requirements for microwave detectors supersedes DD CLC/TS 50131-2-3:2004 ISBN 978 0 580 58458 9 £65.00 members, £130.00 non-members

supersedes BS EN 61326:1998 ISBN 978 0 580 56351 5 £69.00 members, £138.00 non-members GEL/65/1

GW/1/1

BS EN 61784:—

BS EN 50131-2-5:2008

BS EN 61784-2:2008

Railway applications. Braking. Relay valves

Requirements for combined passive infrared and ultrasonic detectors

Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3


supersedes DD CLC/TS 50131-2-5:2004 ISBN 978 0 580 58456 5 £65.00 members, £130.00 non-members


RAE/4

GW/1/1

AMT/7

Industrial communication networks. Profiles

AW/4

BS EN 15611:2008

12



BS Implementations

BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.

BS ISO 7207:—

BS ISO 9838:2008

Implants for surgery. Components for partial and total knee joint prostheses

Alpine and touring ski-bindings. Test soles for ski-binding tests

BS ISO 7207-1:2007 Classification, definitions and designation of dimensions supersedes BS 7251-2:1995 ISBN 978 0 580 54089 9 £57.00 members, £114.00 non-members CH/150/4

BS ISO 7689:2008 BS ISO 1496:— Series 1 freight containers. Specification and testing

BS ISO 1496-2:2008 Thermal containers

Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification supersedes BS A 300:1989 ISBN 978 0 580 55021 8 £57.00 members, £114.00 non-members

supersedes BS ISO 1496-2:1996 ISBN 978 0 580 55165 9 £85.00 members, £170.00 non-members

ACE/12

TW/1

Milk and milk products. Determination of organochlorine pesticides and polychlorobiphenyls. Method using capillary gas-liquid chromatography with electroncapture detection

BS ISO 2597:— Iron ores. Determination of total iron content

BS ISO 2597-2:2008 Titrimetric methods after titanium(III) chloride reduction no current standard is superseded ISBN 978 0 580 57595 2 £57.00 members, £114.00 non-members

BS ISO 4701:2008 Iron ores and direct reduced iron. Determination of size distribution by sieving supersedes BS 5663-2:1987 ISBN 978 0 580 56730 8 £75.00 members, £150.00 non-members ISE/58

BS ISO 5598:2008 Fluid power systems and components. Vocabulary no current standard is superseded ISBN 978 0 580 54451 4 £108.00 members, £216.00 non-members

SW/136

BS ISO 10071:— Tools for pressing. Ball-lock punches

BS ISO 10071-1:2008 Ball-lock punches for light duty supersedes BS ISO 10071-1:2001 ISBN 978 0 580 64303 3 £40.00 members, £80.00 non-members MTE/12

BS ISO/IEC 11695:— BS ISO 8260:2008

no current standard is superseded ISBN 978 0 580 58540 1 £57.00 members, £114.00 non-members AW/5

Identification cards. Optical memory cards. Holographic recording method

BS ISO/IEC 11695-2:2008 Dimensions and location of accessible optical area no current standard is superseded ISBN 978 0 580 61524 5 £40.00 members, £80.00 non-members IST/17

BS ISO 8468:2007 Ships and marine technology. Ship’s bridge layout and associated equipment. Requirements and guidelines

ISE/58

supersedes BS ISO 9838:1991 ISBN 978 0 580 56539 7 £40.00 members, £80.00 non-members

supersedes BS EN ISO 8468:1995 and BS ISO 14612:2004 ISBN 978 0 580 65540 1 £75.00 members, £150.00 non-members

BS ISO/IEC 11695-3:2008 Optical properties and characteristics no current standard is superseded ISBN 978 0 580 61525 2 £40.00 members, £80.00 non-members IST/17

SME/32/-/5

BS ISO 11903:2008 BS ISO 8642:2008

Tools for pressing. Guide pillar mountings

Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods


supersedes BS A 298:1988 ISBN 978 0 580 55581 7 £57.00 members, £114.00 non-members ACE/12

MCE/18/-/1

MTE/12

BS ISO 12164:— Hollow taper interface with flange contact surface

BS ISO 9231:2008 Milk and milk products. Determination of the benzoic and sorbic acid contents

Please do not send confirmation

no current standard is superseded ISBN 978 0 580 56534 2 £40.00 members, £80.00 non-members AW/5

telephone as it can lead to duplication

14

Dimensions of shanks for stationary tools no current standard is superseded ISBN 978 0 580 58997 3 £40.00 members, £80.00 non-members MTE/5

of orders placed by

BS ISO 12164-3:2008

BS ISO 9697:2008 Water quality. Measurement of gross beta activity in non-saline water. Thick source method

BS ISO 12164-4:2008

supersedes BS 6068-3.2:1993 ISBN 978 0 580 53592 5 £40.00 members, £80.00 non-members


EH/3

MTE/5


Dimensions of receivers for stationary tools


BS ISO 12639:2004

BS ISO 21278:—

BS ISO/IEC 24727:—

Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)

Equipment for crop protection. Induction hoppers

Identification cards. Integrated circuit card programming interfaces

BS ISO 21278-1:2008

BS ISO/IEC 24727-2:2008

Test methods

Generic card interface



AGE/15

IST/17

BS ISO 21278-2:2008

BS ISO/IEC 24727-3:2008

General requirements and performance limits

Application interface



AGE/15

IST/17

BS ISO 14347:2008

BS ISO 22634:2008


Fatigue. Design procedure for welded hollowsection joints. Recommendations

Cigarettes. Determination of benzo[a]pyrene in cigarette mainstream smoke. Method using gas chromatography/mass spectrometry

Information technology. Individualized adaptability and accessibility in e-learning, education and training


BS ISO/IEC 24751-1:2008

supersedes BS ISO 12639:1998 ISBN 978 0 580 60158 3 £85.00 members, £170.00 non-members PAI/43

BS ISO 13606:— Health informatics. Electronic health record communication

BS ISO 13606-2:2008 Archetype interchange specification no current standard is superseded ISBN 978 0 580 60189 7 £103.00 members, £206.00 non-members IST/35

no current standard is superseded ISBN 978 0 580 53490 4 £85.00 members, £170.00 non-members WEE/37

AW/40

BS ISO/IEC 14651:2007 Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering supersedes BS ISO/IEC 14651:2001 ISBN 978 0 580 61270 1 £80.00 members, £160.00 non-members IST/5

BS ISO 16528:— Boilers and pressure vessels

BS ISO 16528-1:2007 Performance requirements no current standard is superseded ISBN 978 0 580 63951 7 £57.00 members, £114.00 non-members PVE/-/1

BS ISO 22915:— Industrial trucks. Verification of stability

BS ISO 22915-2:2008

Framework and reference model no current standard is superseded ISBN 978 0 580 56060 6 £75.00 members, £150.00 non-members IST/43

BS ISO/IEC 24751-2:2008

Counterbalanced trucks with mast

’Access for all’ personal needs and preferences for digital delivery



MHE/7

IST/43

BS ISO 22915-3:2008 Reach and straddle trucks supersedes BS 4436:1978 ISBN 978 0 580 54860 4 £40.00 members, £80.00 non-members MHE/7

BS ISO/IEC 24751-3:2008 ’Access for all’ digital resource description no current standard is superseded ISBN 978 0 580 56062 0 £75.00 members, £150.00 non-members IST/43


BS ISO 23830:2008

Information technology. Security techniques. Time-stamping services

Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondaryion mass spectrometry

BS ISO 25639:—

BS ISO/IEC 18014-1:2008


BS ISO 25639-1:2008

Framework supersedes BS ISO/IEC 18014-1:2002 ISBN 978 0 580 55483 4 £65.00 members, £130.00 non-members

CII/60

Exhibitions, shows, fairs and conventions

Vocabulary no current standard is superseded ISBN 978 0 580 58687 3 £57.00 members, £114.00 non-members SVS/1/2

IST/33

BS ISO 24394:2008 Information technology. Security techniques. Methodology for IT security evaluation

Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components

supersedes BS ISO/IEC 18045:2005 ISBN 978 0 580 58477 0 £130.00 members, £260.00 non-members



IST/33

WEE/-/1

SVS/1/2

BS ISO/IEC 18045:2008



BS ISO 25639-2:2008 Measurement procedures for statistical purposes

15

BS Implementations continued... BS ISO 26987:2008

PD CEN ISO/TR 24094:2007

DD CEN/TS 15810:2008

Resilient floor coverings. Determination of staining and resistance to chemicals

Analysis of natural gas. Validation methods for gaseous reference materials

Graphical symbols for use on integrated building automation equipment




PRI/60

PTI/15

RHE/16

BS ISO 27991:2008

PD ISO/TR 28682:2008

DD ISO/TS 16281:2008

Ships and marine technology. Marine evacuation systems. Means of communication

Intelligent transport systems. Joint APECISO study of progress to develop and deploy ITS standards

Rolling bearings. Methods for calculating the modified reference rating life for universally loaded bearings




SME/32/-/1

EPL/278

PUBLISHED DOCUMENTS PD 6688-1-7:2009 Recommendations for the design of structures to BS EN 1991-1-7

PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties no current standard is superseded ISBN 978 0 580 60527 7 £65.00 members, £130.00 non-members


ISE/NFE/4

B/525/1

DRAFTS FOR DEVELOPMENT

PD 8010:—

DD CEN ISO/TS 12780:—

Code of practice for pipelines

Geometrical product specifications (GPS). Straightness

MCE/7

DD ISO/TS 16610:— Geometrical product specifications (GPS). Filtration

DD ISO/TS 16610-1:2006 Overview and basic concepts no current standard is superseded ISBN 978 0 580 59791 6 £40.00 members, £80.00 non-members TDW/4

DD ISO/TS 16610-20:2006

PD 8010-3:2009 Steel pipelines on land. Guide to the application of pipeline risk assessment to proposed developments in the vicinity of major accident hazard pipelines containing flammables. Supplement to PD 8010-1:2004 no current standard is superseded ISBN 978 0 580 61732 4 £84.00 members, £168.00 non-members

DD CEN ISO/TS 12780-1:2007

Linear profile filters. Basic concepts no current standard is superseded ISBN 978 0 580 59793 0 £32.00 members, £64.00 non-members TDW/4

Vocabulary and parameters of straightness no current standard is superseded ISBN 978 0 580 57990 5 £21.00 members, £42.00 non-members TDW/4

DD CEN ISO/TS 12781:—

DD ISO/TS 17837:2008 Milk and milk products. Determination of nitrogen content and crude protein calculation. Kjeldahl method no current standard is superseded ISBN 978 0 580 60160 6 £32.00 members, £64.00 non-members

PSE/17/2

Geometrical product specifications (GPS). Flatness

PD CEN/TR 15745:2008

DD CEN ISO/TS 12781-1:2007

DD ISO/TS 19072:—

Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method. Round Robin research report

Vocabulary and parameters of flatness

Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections

no current standard is superseded ISBN 978 0 580 60676 2 £57.00 members, £114.00 non-members PTI/13

PD ISO/TR 22305:2008

no current standard is superseded ISBN 978 0 580 57992 9 £21.00 members, £42.00 non-members TDW/4

AW/5

DD ISO/TS 19072-3:2008 Pyrotechnic device and harness connector assembly. Type 1

DD ISO/TS 15530:— Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement

no current standard is superseded ISBN 978 0 580 60449 2 £20.00 members, £40.00 non-members AUE/16

Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances

DD ISO/TS 15530-4:2008 Evaluating task-specific measurement uncertainty using simulation

Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC)




AW/40

TDW/4

EPL/278

16

DD CEN ISO/TS 25110:2008



SPECIALIST BOOKS FROM BSI

BS EN 1999:—

DD ISO/TS 21872:—

Eurocode 9. Design of aluminium structures

Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp.

BS EN 1999-1-2:2007 BIP 0008-1:2008

Structural fire design

Evidential Weight and Legal Admissibility of Information Stored Electronically. Code of Practice for the Implementation of BS 10008

CORRIGENDUM 1

DD ISO/TS 21872-1:2007

B/525/12

Detection of Vibrio parahaemolyticus and Vibrio cholerae

supersedes BIP 0008-1:2004 ISBN 978 0 580 63945 6 £60.00 members, £60.00 non-members

CORRIGENDUM 2

BS EN 14025:2008 Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction

AW/9

Also incorporates Corrigendum 1.

CORRIGENDUM 1

BIP 0008-2:2008 Evidential Weight and Legal Admissibility of Information Communicated Electronically. Code of Practice for the Implementation of BS 10008

AUE/18

BS EN 14491:2006


Dust explosion venting protective systems

BIP 0008-3:2008

BS EN ISO 16851:2004

Evidential Weight and Legal Admissibility of Linking Electronic Identity to Documents. Code of Practice for the Implementation of BS 10008

Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt


CORRIGENDUM 1 FSH/23

CORRIGENDUM 1 PRI/67

Welding. Welding of reinforcing steel

BS EN ISO 17660-1:2006

supersedes BIP 0009-1:2004, BIP 0009-2:2006 and BIP 0009-3:2006 ISBN 978 0 580 64018 6 £40.00 members, £40.00 non-members

CORRIGENDUM 1

Load-bearing welded joints

BS EN 378:—

BS 5892:—

BS 5892-3:1992+A2:2009

WEE/43

Specification for monobloc wheels for traction and trailing stock

BS EN ISO 17660-2:2006

AMENDMENT 2 £57.00 members, £114.00 non-members

Non load-bearing welded joints

RAE/3/-/1

CORRIGENDUM 1

Also incorporates Amendment 1.

WEE/43

BS 6644:2005+A1:2008 BS EN 60745:— Hand-held motor-operated electric tools. Safety

BS EN 60745-1:2006

Specification for installation of gas-fired hot water boilers of rated inputs of between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases)

General requirements


CORRIGENDUM 2

GSE/30

CPL/61/6


BS 7609:1992+A2:2009 BS EN 60927:2007 Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements CORRIGENDUM 1

The following amendments to British Standards were made available last month.

NOTE: Updated British Standards must be reordered as the amendments are not available separately.

Railway rolling stock materials

Evidential Weight and Legal Admissibility of Electronic Information. Compliance Workbook for Use with BS 10008

Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time.

The following standards have been amended and the amendments have been incorporated into an updated standard.

BS EN ISO 17660:—

BIP 0009:2008

AMENDMENTS TO BRITISH STANDARDS

UPDATED BRITISH STANDARDS

CPL/34/3

Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors AMENDMENT 2 £40.00 members, £80.00 non-members GEL/20/11

BS EN 62233:2008

Also incorporates Amendment 1.

Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure

BS EN 792:— Hand-held non-electric power tools. Safety requirements

Refrigerating systems and heat pumps. Safety and environmental requirements

CORRIGENDUM 1

BS EN 378-1:2008

BS ISO 6488:2004

Basic requirements, definitions, classification and selection criteria

Tobacco and tobacco products. Determination of water content. Karl Fischer method

CORRIGENDUM 1

CORRIGENDUM 1


RHE/18

AW/40

MCE/8/-/2


CPL/61


BS EN 792-4:2000+A1:2008 Non-rotary percussive power tools

17

Updated British Standards continued... BS EN 792-5:2000+A1:2008

BS 1722-5:2006

BS EN 12628:1999

Rotary percussive drills

Specification for close-boarded and wooden palisade fences

Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods

Some minor editorial errors have been identified in some parts of the BS 1722 series published in December 2006. At present we are unable to issue an amendment or corrigendum due to insufficient amount of correction to be made. Therefore the relevant committee has decided to issue this special announcement to draw users attention to the following standards:

PH/4/7

AMENDMENT 1 £57.00 members, £114.00 non-members MCE/8/-/2

BS EN 792-6:2000+A1:2008 Assembly power tools for threaded fasteners AMENDMENT 1 £57.00 members, £114.00 non-members MCE/8/-/2

BS EN 792-7:2001+A1:2008 Grinders AMENDMENT 1 £80.00 members, £160.00 non-members MCE/8/-/2


BS EN 12077:—

BS EN 13319:2000 Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods PH/4/7

* BS 1722-2:2006 Table 4 & Table 5 * BS 1722-5:2006 Table 1 Figure 5 Section 7.1 The full sets of correction on above mentioned standards are available on request from the Programme Manager (below). Please note these corrections will be incorporated into BS 1722-2 and BS 1722-5 at the next series of reviews due in 2011. Contact: Nyomee Kyaw Email: [email protected] B/201

Cranes safety. Requirements for health and safety

BS ISO 2108:2005 Information and documentation. International standard book number (ISBN) IDT/2/18

BS ISO 6104:2005 Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature MTE/13

BS EN 12077-2:1998+A1:2008 Limiting and indicating devices AMENDMENT 1 £57.00 members, £114.00 non-members MHE/3/11

BS EN 14394:2005+A1:2008 Heating boilers. Heating boilers with forced draught burners. Nominal heat output not exceeding 10 MW and maximum operating temperature of 110°C AMENDMENT 1 £103.00 members, £206.00 non-members RHE/10

BS EN 14502:— Cranes. Equipment for the lifting of persons

BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action.

BS ISO 14594:2003 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy CII/9

Confirmation indicates the continuing currency of a standard.

BRITISH STANDARDS DECLARED OBSOLESCENT

Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

BS EN 14502-2:2005+A1:2008 Elevating control stations AMENDMENT 1 £57.00 members, £114.00 non-members MHE/3/11

BS EN 1809:1998 Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods

BS 6102:— Cycles

PH/4/7

BS 6102-1:1981

SPECIAL ANNOUNCEMENTS Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

BS EN 1972:1997 Diving accessories. Snorkels. Safety requirements and test methods SW/136

BS EN ISO 9409:— BS 1722:—

Manipulating industrial robots. Mechanical interfaces

Fences

GME/25

This standard has been declared obsolescent as it is revised by BS 6102-1:1992 but cited in the Pedal Bicycle (Safety) Regulations 2003

BS 6102-1:1992 Specification for safety requirements for bicycles GME/25

BS 1722-2:2006

BS EN ISO 9409-1:2004

Specification for strained wire and wire mesh netting fences

AMT/4

18

Specification for safety requirements for bicycles

Plates


This standard has been declared obsolescent as it is partially replaced by BS EN 14766:2005, BS EN 14781:2005 and BS EN 14764:2005 but cited in the Pedal Bicycle (Safety) Regulations 2003


BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 March, 2009. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

BS 3G 100:— Specification for general requirements for equipment for use in aircraft

BS 2740:1969

BS 6100-2.7:1992

Specification for simple smoke alarms and alarm metering devices

Public health. Environmental engineering

EH/2/1

This standard has been withdrawn as it is no longer relevant

All equipment. Environmental conditions. Change of temperature

Recommendations for the construction of simple smoke viewers EH/2/1


BS 2811:1969 Specification for smoke density indicators and recorders

Specification for operation and strength characteristics Superseded by BS 6375-2:2009 and BS EN 120461:2003

BS 7251:—


Orthopaedic joint prostheses

Specification for counterbalanced lift trucks. Stability. Basic tests MHE/7

Superseded by BS ISO 22915-2:2008

BS 4436:1978 Specification for reach and straddle fork lift trucks. Stability tests Superseded by BS ISO 22915-3:2008

If any standard in this list has been amended since publication, all amendments published to date are also withdrawn

BS 6375-2:1987

EH/2/1

MHE/7

BRITISH STANDARDS WITHDRAWN

Performance of windows

B/538/1

ACE/58

This standard has been proposed for withdrawal as the international equivalent ISO 2657:1976 has been withdrawn

Superseded by BS 6100-5:2009

BS 6375:— BS 2741:1969

BS 3726:1978 BS 3G 100-2.3.15:1978 (ISO 2657:1976)

B/500

BS 5663:—

BS 7251-2:1995 Specification for classification, definitions and designation of dimensions of femoral and tibial components for partial and total knee joint prostheses CH/150/4

Superseded by BS ISO 7207-1:2007

BS EN 533:1997 Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies PH/3/2

Methods of testing iron ores

Superseded by BS EN ISO 14116:2008

BS 5663-2:1987

BS EN 644:1999

Determination of size distribution by sieving

Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture

ISE/58

Superseded by BS ISO 4701:2008

BS 490:— BS 6068:—

I/-

Water quality

Superseded by BS EN 1715-2:2008

BS 6068-3.2:1993

BS EN 832:2000

PRI/67

Radiological methods. Measurement of gross beta activity in non-saline water

Thermal performance of buildings. Calculation of energy use for heating. Residential buildings


EH/3

B/540



Conveyor and elevator belting

BS 490-10.7:1984 Testing for physical properties. Method for determination of length of an endless belt

BS 1640:— Specification for steel butt-welding pipe fittings for the petroleum industry

BS 6100:—

BS 1640-2:1962

BS 6100-2:—

Wrought and cast austenitic chromium-nickel steel fittings

Civil engineering

ISE/19

BS 6100-2.5:1991

WEE/46

Hydraulic engineering and construction work


Superseded by BS EN 10253-3:2008 and BS EN 10253-4:2008

Glossary of building and civil engineering terms

BS EN 1330:— Non-destructive testing. Terminology

BS EN 1330-5:1998 Terms used in eddy current testing

B/500


BS EN 12180:2000

Wrought and cast austenitic chromium-nickel steel fittings. Metric units

BS 6100-2.6:1991

ISE/19

Natural waters. Inland. Coastal. Marine

Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants

B/500

CH/150



BS 1640-4:1968

Superseded by BS EN 10253-3:2008 and BS EN 10253-4:2008



19

British Standards Withdrawn continued... BS EN 26802:1993 Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing PRI/66


BS EN 61000:— Electromagnetic compatibility (EMC)

BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn.

BS EN 13429:2004 Packaging. Reuse PKW/0

BS EN 13430:2004 Packaging. Requirements for packaging recoverable by material recycling PKW/0

Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 March, 2009, in order to be considered by the relevant UK Committee.

BS EN 13431:2004

GEL/65/1

BS EN ISO 4320:1998

PKW/0

Superseded by BS EN 61326-1:2006, BS EN 613262-1:2006, BS EN 61326-2-2:2006, BS EN 61326-23:2006, BS EN 61326-2-4:2006, BS EN 61326-25:2006, BS EN 61326-2-6:2006, BS EN 61326-31:2008 and BS EN 61326-3-2:2008

Non-ionic surface active agents. Determination of cloud point index. Volumetric method

BS EN 61000-3-2:2001 Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) GEL/210/12

Superseded by BS EN 61000-3-2:2006

BS EN 61326:1998 Electrical equipment for measurement, control and laboratory use. EMC requirements

CII/34

Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil D.C. capacitors

Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC CII/34

BS EN 12458:1999

Superseded by BS EN 60384-13:2006

Surface active agents. Determination of stability in hard water

Ships and marine technology. Ship’s bridge layout and associated equipment. Requirements and guidelines for centralized and integrated bridge functions SME/32/5


BS EN 13432:2000 Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging

PD CEN/TR 13695:—

PD CEN/TR 13695-2:2004 Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment PKW/0

EPL/40X

BS ISO 14612:2004

PKW/0

Packaging

BS EN 12139:1999 BS EN 131800:1998

Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value

BS EN 14015:2004

CII/34

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

BS EN 12582:1999

PVE/15

Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD

BS EN 14210:2003

CII/34

BS A 298:1988

Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method CII/34

Methods of test for self-locking nuts with maximum operating temperature greater than 425°C

BS EN 12728:2000

ACE/12

Surface active agents. Determination of foaming power. Perforated disc beating method


CII/34

BS EN 14370:2004 Surface active agents. Determination of surface tension CII/34

BS A 300:1989

BS EN 12974:2000

Specification for procurement of alloy steel bolts with strength classification 1100 MPa and MJ threads

Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure

ACE/12

CII/34

CII/34

BS EN 13427:2004

BS EN 14480:2004

Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste

Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method

PKW/0

CII/34

BS EN 13428:2004

BS EN 14620:—

BS EN 14371:2004 Surface active agents. Determination of foamability and degree of foamability. Circulation test method


e-mail your order [email protected]

Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction PKW/0

20


Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C


BS EN 14620-1:2006

BS EN WI 00163089

BS EN ISO 10993-16 (Revision)

General

Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods

Toxicokinetic study design for degradation products and leachables

B/503

CH/194

BS EN WI 00163090

DD CEN/TS 12390:—

PVE/15

BS EN 14620-2:2006 Metallic components PVE/15

BS EN 14620-3:2006 Concrete components

Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods

DD CEN/TS 12390-11 Determination of chloride resistance

BS EN WI 00207205

Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

BS XXXX Automatic Distress Signal Units. Specification

B/517

Non-domestic storage furniture. Test methods for the determination of strength, durability and stability

BS EN 12417:2001/Amendment 2

FW/0/4

The reference number of the committee responsible for each item of new work started is given after each entry.

Testing hardened concrete

B/503

PVE/15

NEW WORK STARTED

will supersede BS EN ISO 10993-16:1997

Machine tools. Safety. Machining centres MTE/1/1

PD CEN/TR 1749 (Revision) European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) will supersede PD CEN/TR 1749:2005

BS EN 12697:— Bituminous mixtures. Test methods for hot mix asphalt

GSE/-/4

BS EN 4199:— Aerospace series. Bonding straps for aircraft

BS EN 12697-47 Determination of the ash content of lake asphalt B/510/1

PH/4

BS EN 4199-004 BS 7354 (Revision)

Round bonding straps, copper, tin plated. 65°C up to 150°C and nickel plated. Product standard

Code of practice for design of high-voltage open-terminal stations


ACE/6

Safety of machine tools. Drilling machines MTE/1/1

will supersede BS 7354:1990 PEL/17/1

BS EN 4635

Security screening of individuals employed in a security environment. Code of practice

Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification. 1270 MPa (at ambient temperature)/650°C

GW/3

ACE/6

BS 7858:2006/Amendment 2

BS EN 13135:— Cranes. Safety. Design. Requirements for equipment

BS EN 13135-1:2003/Amendment 1 BS 8461:2005/Amendment 1 Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection SW/136

BS 8462:2005/Amendment 1 Goals for youth football, futsal, mini-soccer and small-sided football. Specification

BS EN ISO 7396:— Medical gas pipeline systems

BS EN 13135-2:2004/Amendment 1

Pipeline systems for compressed medical gases and vacuum

Non-electrotechnical equipment

will supersede BS 8901:2007

Aerospace series. Quality management systems. Assessment will supersede BS EN 9101:2008

BS EN 13148 (Revision) Copper and copper alloys. Hot-dip tinned strip will supersede BS EN 13148:2001 NFE/34/1

ACE/1

SDS/1/-/2

BS EN 13272 (Revision) BS EN ISO 10993:—

BS EN 54:—

MHE/3/1

CH/121/6

BS EN 9101 (Revision) Specification for a sustainable event management system with guidance for use

MHE/3/1

BS EN ISO 7396-1:2007/Amendment 2

SW/136

BS 8901 (Revision)

Electrotechnical equipment

Biological evaluation of medical devices

Fire detection and alarm systems

Railway applications. Electrical lighting for rolling stock in public transport systems will supersede BS EN 13272:2001 RAE/1/-/7

BS EN 54-30

BS EN ISO 10993-12 (Revision)

Point detectors using a combination of CO and heat sensors

Sample preparation and reference materials will supersede BS EN ISO 10993-12:2007

BS EN 13383:—

FSH/12/2

CH/194

Armourstone



21

New Work Started continued... BS EN 13383-1 (Revision)

BS EN 14634 (Revision)

BS EN ISO 17636-2

Specification

Glass packaging. 26 H 180 crown finish. Dimensions

Radiographic examination of welded joints. Imaging plates

will supersede BS EN 14634:2006

will partially supersede BS EN 1435:1997

PKW/0/-/7

WEE/46

Test methods

BS EN 14635 (Revision) Glass packaging. 26 H 126 crown finish. Dimensions

BS EN ISO 22825 (Revision)

will supersede BS EN 13383-2:2002

will supersede BS EN 13383-1:2002 B/502/4

BS EN 13383-2 (Revision)

B/502/4


Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys

PKW/0/-/7

will supersede BS EN ISO 22825:2006

BS EN 13451:—

WEE/46

Swimming pool equipment

BS EN 15269:— BS EN 13451-1 (Revision) General safety requirements and test methods will supersede BS EN 13451-1:2001

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware

BS EN 50136:— Alarm systems. Alarm transmission systems and equipment

SW/136/8

BS EN 15269-20 BS EN 13523:— Coil coated metals. Test methods

Smoke control for hinged and pivoted timber and steel doorsets FSH/22/5

BS EN 13523-10 (Revision) Resistance to fluorescent UV light and water condensation

BS EN 15904

BS EN 50136-3 Requirements RCT (Receiving Centre Transceiver) GW/1/5

BS EN 60269:— Low-voltage fuses


Glass packaging. Standard tolerances for flaconnage

STI/28

PKW/0/-/7

BS EN 60269-6

BS EN 15905

Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

BS EN 13832:— Footwear protecting against chemicals

BS EN 13832-2:2006/Amendment 1 Requirements for footwear resistant to chemicals under laboratory conditions PH/1

BS EN 13832-3:2006/Amendment 1 Requirements for footwear highly resistant to chemicals under laboratory conditions

Fertilizers. Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) CII/37

PEL/32

BS EN 60731 (Revision)

BS EN 15906 Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity B/513

Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy will supersede BS EN 60731:1997+A1:2003 CH/62/3

BS EN 60819:—

PH/1

Non-cellulosic papers for electrical purposes

BS EN 15908 (Revision) Machine tools. Safety. Sawing machines for cold metal

Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives

MTE/1/-/10


Specifications for individual materials. Unfilled aramid (aromatic polyamide) papers

CH/121/6

will supersede BS EN 60819-3-3:2006


GEL/15/10

BS EN 14070:2003/Amendment 1 Safety of machine tools. Transfer and special purpose machines MTE/1/1

BS EN 60819-3-3 (Revision)

BS EN 15909 Fertilizers. Determination of calcium and formate in EC fertilizers

BS EN 60884:—

CII/37

Plugs and socket-outlets for household and similar purposes

BS EN 15910

BS EN 60884-2-7

BS EN 14434 (Revision) Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods will supersede BS EN 14434:2004 FW/0/4

Water quality. Guidance on the estimation of fish abundance with mobile hydroacoustic methods

Particular requirements for cord extension sets PEL/23

EH/3/5

BS EN 61788:— BS EN 14587:— Railway applications. Track. Flash butt welding of rails

BS EN ISO 17636:—

BS EN 61788-6 (Revision) Radiographic examination of welded joints. Industrial films

Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors

will partially supersede BS EN 1435:1997


WEE/46

L/-/90

BS EN ISO 17636-1 BS EN 14587-3 Welding in association with crossing construction RAE/2

22

Superconductivity

Non-destructive testing of welds



BS EN 62609:—

BS ISO 248-2

BS ISO 2376

Insulators for overhead lines. Composite line post insulators

Thermogravimetric method using automatic analyser with infrared drying

Anodizing of aluminium and its alloys. Determination of electric breakdown potential

PRI/23

STI/32

BS EN 62609-1 Definitions, end fittings and designations PEL/36

BS ISO 520 Methods of test for cereals and pulses. Determination of the mass of 1000 grains will supersede BS 4317-1:1980

BS ISO 105:—

BS ISO 2469 (Revision) Paper, board and pulps. Measurement of diffuse radiance factor will supersede BS ISO 2469:2007

AW/4

PAI/11

Textiles. Tests for colour fastness

BS ISO 527:— BS ISO 105-E01 (Revision)

Plastics. Determination of tensile properties

Paper and board. Determination of resistance to bending

Colour fastness to water will supersede BS EN ISO 105-E01:1996

BS ISO 527-1 (Revision)

TCI/81

General principles will supersede BS EN ISO 527-1:1996

BS ISO 105-E03 (Revision) Colour fastness to chlorinated water (swimming bath water) will supersede BS EN ISO 105-E03:1997 TCI/81

TCI/81

Pendulum-type tester PAI/11

BS ISO 3140 (Revision) BS ISO 527-2 (Revision) Test conditions for moulding and extrusion plastics

Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment will supersede BS ISO 3140:2005 AW/54

BS ISO 3211

PRI/21

Colour fastness to spotting. Water will supersede BS EN ISO 105-E07:1997

BS ISO 2493-2

PRI/21


BS ISO 105-E07 (Revision)

BS ISO 2493:—

BS ISO 1920:— Testing of concrete

Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation STI/32

BS ISO 3228

BS ISO 105-E09 (Revision) Colour fastness to potting

BS ISO 1920-10

will supersede BS EN ISO 105-E09:1997

Determination of static modulus of elasticity in compression

Rolling bearings. Bearings with speherical outside surface and extended inner ring width. Specification for dimensions of cast and pressed housings

B/517/1

will supersede BS 6010-3:1994

TCI/81

MCE/7

BS ISO 105-E12 (Revision) Colour fastness to milling. Alkaline milling

BS ISO 2085

will supersede BS EN ISO 105-E12:1997

Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulphate test

TCI/81

STI/32

BS ISO 128-71 Simplified representation for mechanical engineering TDW/4

Methods of test for petroleum and its products. Petroleum products. Determination of distillation characteristics at atmospheric pressure will supersede BS EN ISO 3405:2000

BS ISO 128:— Technical drawings. General principles of presentation

BS ISO 3405 (Revision)

PTI/13

BS ISO 2106 Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings (gravimetric method) will supersede BS 6161-1:1984

BS ISO 3517 Oil of neroli (Citrus aurantium L. spp. aurantium, syn. Citrus aurantium L. spp. amara var. pumilia) AW/54

STI/32

BS ISO 3613 (Revision) BS ISO 180 (Revision) Plastics. Determination of Izod impact strength will supersede BS EN ISO 180:2001 PRI/21

BS ISO 2135 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light

BS ISO 225

will supersede BS EN 20225:1992 FME/9/2

BS ISO 248:—

DD ISO/TS 3691:— BS ISO 2143 Methods of test for anodic oxidation coatings on aluminium and its alloys. Estimation of loss of absorptive power of sealed coatings: dye spot test with prior acid treatment

Industrial trucks. Safety requirements and verification

DD ISO/TS 3691-7


Specific regional requirements in countries of the European Community

STI/32

MHE/7

Rubber, raw. Determination of volatile matter content


will supersede BS EN ISO 3613:2001 STI/33

STI/32

Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions

Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zincaluminium alloys. Test methods


23

New Work Started continued... DD ISO/TS 3691-8


BS ISO 7176-28

Additional regional requirements in countries of the European Community

Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification

Requirements and test methods for stairclimbing devices

MHE/7

CH/173/1


BS ISO 3930:— Instruments for measuring vehicle exhaust emissions

BS ISO 3930-2

PRI/66/-/1

BS ISO 6240 Recommendations for performance standards in building. Contents and presentation

Metrological controls, and performance tests


MCE/22

B/500

BS ISO 7270:— Rubber. Analysis by pyrolytic gaschromatographic methods

BS ISO 7270-1:2003/Amendment 1 Identification of polymers (single polymers and polymer blends) PRI/23

BS ISO 3951:— Sampling procedures for inspection by variables

BS ISO 6241 Performance standards in building. Principles for their preparation and factors to be considered


Procedures for assessment of declared quality levels

B/500

will supersede BS ISO 7270-2:2005

SS/5

BS ISO 6361:—

BS ISO 3951-4

Determination of styrene/butadiene/isoprene ratio PRI/23

Wrought aluminium and aluminium alloys. Sheets, strips and plates

BS ISO 7668

Natural latex rubber condoms. Requirements and test methods

BS ISO 6361-1

Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, or 85°


Technical conditions for inspection and delivery

STI/32

CH/157

NFE/35/5


BS ISO 7759 BS ISO 4404:— Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids


BS ISO 6361-2 Mechanical properties NFE/35/5

BS ISO 6361-3

Water-containing fluids

Strips. Tolerances on shape and dimensions


NFE/35/5

PTI/13

BS ISO 6361-4 BS ISO 4650 (Revision)

Sheets and plates. Tolerances on form and dimensions

Rubber. Identification. Infrared spectrometric method

NFE/35/5

BS ISO 6361-5 Chemical composition

BS ISO 5636:— Paper and board. Determination of air permeance (medium range)

STI/32

BS ISO 7827 (Revision) Water quality. Evaluation in an aqueous medium of the ’ultimate’ aerobic biodegradability of organic compounds. Method by analysis of dissolved organic carbon (DOC) will supersede BS EN ISO 7827:1996 EH/3/5


will supersede BS ISO 4650:2005 PRI/23

Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surface using a goniophotometer or an abridged goniophotometer

NFE/35/5

Water quality. Examination and determination of colour will supersede BS EN ISO 7887:1995 EH/3/2

BS ISO 6719

BS ISO 7967:— Components and systems of reciprocating internal combustion engines

Sheffield method

Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments


STI/32

Control and monitoring systems


PAI/11

BS ISO 7967-9 will supersede BS 7016-9:1997

BS ISO 6927

MCE/14

Gurley method

Building construction. Jointing products. Sealants. Vocabulary

DD ISO/TS 8000:—



PAI/11

B/500

BS ISO 5659:—

BS ISO 7010:2003/Amendment 57

AMT/4

Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas

BS ISO 8082:—


Data quality

DD ISO/TS 8000-100 Master data. Overview

Plastics. Smoke generation

BS ISO 5659-2 (Revision) Determination of optical density by a singlechamber test

PH/8/1


BS ISO 7176:—

PRI/26

Wheelchairs

24


Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures


BS ISO 8082-1

BS ISO 9717

DD ISO/TS 10303-1469

General machines

Method for specifying phosphate conversion coatings for metals

Application module. Foundation state definition


AMT/4

AGE/29

BS ISO 8082-2 Machines having a rotating platform with a cab and boom on the platform AGE/29

BS ISO 8124:— Safety of toys

STI/38

DD ISO/TS 10303-1470 BS ISO 9836 Performance standards in building. Definition and calculation of area and space indicators

AMT/4

will supersede BS 7641:1993 B/500

DD ISO/TS 10303-1471

BS ISO 9926:—

Application module. State based behaviour representation

Cranes. Training of drivers

AMT/4

BS ISO 8124-1:2000/Amendment 4 Safety aspects related to mechanical and physical properties

Application module. Parameter value specification

CW/15

BS ISO 9926-2

DD ISO/TS 10303-1472

BS ISO 8251

Mobile cranes

Application module. General model parameter

Anodizing of aluminium and its alloys. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus

MHE/3/5

AMT/4

BS ISO 10074

DD ISO/TS 10303-1473

STI/32

Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys

Application module. Description assignment

BS ISO 8252 Anodizing of aluminium and its alloys. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus STI/32

BS ISO 8362:—

AMT/4

STI/32

DD ISO/TS 10303-1474 Application module. Analysis assignment

DD ISO/TS 10128

AMT/4

Graphic technology. Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data

DD ISO/TS 10303-1475

PAI/43

Application module. Analysis characterized

Injection containers for injectables and accessories

AMT/4

BS ISO 10215 BS ISO 8362-6 Caps made of aluminium-plastics combinations for injection vials CH/212

Methods of test for anodic oxidation coatings on aluminium and its alloys. Visual determination of image clarity. Chart scale method

STI/32

B/518

BS ISO 8970 Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density will supersede BS EN 28970:1991 B/518

Application module. Analysis identification AMT/4


DD ISO/TS 10303-1477

BS ISO 8969 Timber structures. Testing of punched metal plate fasteners and joints

DD ISO/TS 10303-1476

Application module. System modeling

BS ISO 10216

AMT/4

Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method

DD ISO/TS 10303-1478


Application module. External functional model AMT/4

STI/32

DD ISO/TS 10303:— Industrial automation systems and integration. Product data representation and exchange

DD ISO/TS 10303-1479 Application module. Extended task element AMT/4

BS ISO 8993 Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method

DD ISO/TS 10303-1466

DD ISO/TS 10303-1480

Application module. Program management

Application module. Task element

AMT/4

AMT/4

DD ISO/TS 10303-1467

DD ISO/TS 10303-1481

Application module. Risk management

Application module. Behaviour view definition

AMT/4

AMT/4

DD ISO/TS 10303-1468

DD ISO/TS 10303-1482


Application module. External state based behaviour model

Application module. Behaviour identification and version

STI/32

AMT/4

AMT/4

will supersede BS 6161-16:1990 STI/32

BS ISO 8994 Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method



25

New Work Started continued... DD ISO/TS 10303-1483

BS ISO 10640

BS ISO 11114:—

Application module. Behaviour description assignment

Plastics. Guidance on the assessment of accelerated photoageing

Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents

AMT/4

PRI/21

DD ISO/TS 10303-1484

PD ISO/TR 10688

Non-metallic materials

Application module. System identification and version

Paper, board and pulps. Basic equations for optical properties


AMT/4

PAI/11

DD ISO/TS 10303-1485

BS ISO 10803

Application module. System view definition

Design method for ductile iron pipes

AMT/4

PSE/10

DD ISO/TS 10303-1486

BS ISO 10804

Application module. Decision support

Restrained joint systems for ductile iron pipelines. Design rules and type testing


AMT/4

PVE/3

BS ISO 11118 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods PVE/3

BS ISO 11119:— Gas cylinders of composite construction. Specification and test methods

PSE/10

DD ISO/TS 10303-1487 Application module. Measure of effectiveness

BS ISO 10845:—

AMT/4

Construction procurement

DD ISO/TS 10303-1488 Application module. Verification and validation AMT/4

BS ISO 11119-1 Hoop wrapped composite gas cylinders PVE/3

BS ISO 10845-2 Formatting and compilation of procurement documentation B/500

BS ISO 11119-2 Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners PVE/3

DD ISO/TS 10303-1489 Application module. Issue management AMT/4

DD ISO/TS 10303-1490

BS ISO 10845-3 Standard conditions of tender

Application module. Issue

BS ISO 10845-4

AMT/4

Standard conditions for the calling for an expression of interest

DD ISO/TS 10303-1491 Application module. Expression assignment

DD ISO/TS 10303-1492 Application module. Function based behaviour representation

PVE/3

BS ISO 11122 Ice hockey. Body protection (protective equipment) for players

B/500

AMT/4

BS ISO 11119-3 Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or nonmetallic liners

B/500

BS ISO 10845-5

SW/136/22

Participation of targeted enterprises

BS ISO 11206

B/500

BS ISO 10845-6

Water quality. Determination of dissolved bromate. Method using liquid chromatography of ions and postcolumn reaction (PCR)

AMT/4

Participation of targeted partners in joint ventures in contracts

EH/3/2

DD ISO/TS 10303-1493

B/500

BS ISO 11209

BS ISO 10845-7

Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements

Application module. Disposition AMT/4

BS ISO 10376

Participation of targeted enterprises and targeted labour (local resources) in contracts

Pulps. Determination of fines content

B/500

BS ISO 11233

PAI/11

BS ISO 10845-8 BS ISO 10617 Standard data format for colorimetric communication. Textiles and related measurement TCI/81

BS ISO 10628:— Diagrams for chemical and petrochemical industry

SME/32/-/12

Participation of targeted labour in contracts

Space systems. Orbit determination and estimation ACE/68/-/3

B/500

BS ISO 11337 (Revision) BS ISO 11005 Technical product documentation. Use of main documents TDW/4

Plastics. Polyamides. Determination of ecaprolactam and w-laurolactum by gas chromatography will supersede BS EN ISO 11337:2004 PRI/21

BS ISO 11057

BS ISO 11349

Graphical symbols

Air quality. Standard test method for filtration characterization of cleanable filter media

Water quality. Determination of the low volatile lipophilic substances index

TDW/4

EH/2/1

EH/3/2

BS ISO 10628-2

26



BS ISO 11352



Water quality. Determination of measurement uncertainty based on validation data

Metallic materials. Fatigue testing. Statistical planning and analysis of data

Chemical analysis of refractory products by XRF. Fused cast bead method

EH/3/2

will supersede BS ISO 12107:2003


ISE/NFE/4

RPI/1

BS ISO 11354 Industrial automation systems and integration. Requirements for establishing manufacturing enterprise interoperability AMT/4

PD ISO/TR 11364 Gas cylinders. Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system PVE/3

BS ISO 12211 Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers PSE/17

Refillable welded steel cylinders used to contain materials for sub-atmospheric gas storage and delivery (excluding acetylene) PVE/3

Fluorocarbon refrigerants. Specifications and test methods RHE/18

BS ISO 12212 Petroleum, petrochemical and natural gas industries. Hairpin heat exchangers PSE/17

BS ISO 12815 Fibre-reinforced plastics composites. Determination of pin-bearing strength PRI/42

BS ISO 12225 Rolling bearings Insert bearing units. Boundary dimensions

BS ISO 11513

BS ISO 12810

MCE/7

PD ISO/TR 12309

BS ISO 12817 Carbon-fibre-reinforced composites. Determination of open-hole compressive strength PRI/42

Health informatics. Guidelines for international healthcare terminology standardisation

BS ISO 12891:—

IST/35

Retrieval and analysis of surgical implants

BS ISO 12418:—

BS ISO 12891-1

BS ISO 11515 Gas cylinders. Refillable composite reinforced tubes of water capacity between 150 L and 3000 L. Design, construction and testing

Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates

PVE/3

BS ISO 12418-1 BS ISO 11707

Designation system and basis for specifications

Magnesium and magnesium alloys. Determination of lead and cadmium

PRI/82

NFE/35/4

BS ISO 12418-2

BS ISO 11711

Retrieval and handling CH/150

BS ISO 12991 Liquefied natural gas. Fuel tanks for vehicles PVE/18

Preparation of test specimens and determination of properties

Ships and marine technology. Ballast water management systems. Discharge sampling installation and procedures

PRI/82

SME/32/-/3

Mixing water for concrete

BS ISO 13056 Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum PRI/88/4

BS ISO 12439 BS ISO 13067

B/517

Building environment design. Radiant heating and cooling system

Microbeam analysis. Electron backscatter diffraction. Measurement of grain size and distribution

BS ISO 12492

CII/9

BS ISO 11855-1

Rubber, raw. Determination of moisture content by the Karl Fischer method

BS ISO 11855:—

Definition, symbols, and comfort criteria

BS ISO 13074

PRI/23

Analogue quartz clocks. Fitting dimensions of movements to hands and cases

RHE/2

BS ISO 11855-2 Determination of heating and cooling capacity

BS ISO 12567:—

STI/53

Thermal performance of windows and doors. Determination of thermal transmittance by hot box method

BS ISO 13086 Gas cylinders. Factors of safety for composite cylinders

RHE/2

BS ISO 11863 Buildings and constructed assets. Performance standards in building. Tools for determining levels of requirements (for functionality) and levels of serviceability (for capability) B/500

BS ISO 12010

BS ISO 12567-1 (Revision) will supersede BS EN ISO 12567-1:2000 B/540/8

BS ISO 12640:— Graphic technology. Prepress digital data exchange

Water quality. Determination of short chain polychlorinated alkanes (SCCP) in water. Method using gas chromatography/mass spectrometry (GC-MS) and negative ion chemical ionisation (NCI)

BS ISO 12640-4

EH/3/2

PAI/43


PVE/3

Complete windows and doors

e-mail your order

Wide gamut display-referred standard colour image data (TBDencoded/SCID)


[email protected]

27

New Work Started continued... BS ISO 13098


BS ISO 16900:—

Hard material watches. General requirements and test methods

Designation system and basis for specifications

Respiratory protective devices. Methods of test and test equipment

STI/53

PRI/82

BS ISO 13122


Ships and marine technology-launching appliance for davit-launched life raft

Preparation of test specimens and determination of properties

SME/32/-/4



BS ISO 16900-9 Carbon dioxide content of the inhaled air (dead space) PH/4/11

PRI/82

PD ISO/TR 16974

BS ISO 13146 Learning services for non-formal education and training. Basic requirements for service providers SVS/10

BS ISO 15375 (Revision) Hanging devices for multiple use with infusion bottles. Requirements and test methods

Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques which use information and data related to the condition of machines

BS ISO 15686:— Buildings and constructed assets. Service life planning

BS ISO 15686-1 (Revision) BS ISO 13379-1

General principles

General guidelines


GME/21/7

B/500/3

PD ISO/TR 13570:— Wheelchairs

BS ISO 15779 Gas-aerosol fire-extinguishing systems. Requirements and system design FSH/18/6

PD ISO/TR 13570-2 Typical values and recommended limits or dimensions, mass and manoeuvring space as determined in ISO 7176-5 CH/173/1

BS ISO 15817 (Revision) Earth-moving machinery. Safety requirements for remote operator control will supersede BS ISO 15817:2005

Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical sterilants

TCI/69

BS ISO 19408 Footwear. Vocabulary and terminology. Footwear sizing designations and marking systems TCI/69

BS ISO 21070

BS ISO 21542 BS ISO 16000-3 (Revision) Determination of formaldehyde and other carbonyl compounds. Active sampling method

Building construction. Accessibility and usability of built environment B/559

will supersede BS ISO 16000-3:2001 EH/2/3

BS ISO 21561:2005/Amendment 1

BS ISO 14403:—

Rubber condoms. Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms

EH/3/2

Shoe sizing. Conversion table covering the major shoe sizing systems (Mondopoint, Paris Point, English, American and Japanese)

SME/32/-/2


Method with flow injection analysis (FIA)

BS ISO 19407

Indoor air

CH/198

BS ISO 14403-1

PRI/21

BS ISO 16000:—


Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)

Plastics. Determination of fracture toughness under plane-stress conditions

Ships and marine technology. Marine environmental protection. Management and handling of shipboard garbage

B/525/1


BS ISO 18874

B/513/1

BS ISO 13822 Bases for design of structures. Assessment of existing structures

PH/4

will supersede BS ISO 15375:2004 CH/212

BS ISO 13379:—

Respiratory protective devices. Marking and information

Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR PRI/23

will supersede BS ISO 16038:2005 CH/157

BS ISO 16100:— Industrial automation systems and integration. Manufacturing software capability profiling for interoperability

PD ISO/TR 22007:— Plastics. Determination of thermal conductivity and thermal diffusivity

PD ISO/TR 22007-5 Determination of thermal conductivity and thermal diffusivity of poly(methyl methacrylate)

BS ISO 14403-2

BS ISO 16100-1

Method with continuous flow analysis (CFA)

Framework

EH/3/2

AMT/5

BS ISO 14910:—

BS ISO 16131

Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion

Leather. Upholstery leather characteristics. Selection of leather for furniture

Timber structures. Bending applications of Ibeams. Structural testing, evaluation and characterization

TCI/69

B/518

PRI/21

BS ISO 22389

28



BS ISO 22452

BS ISO 24101:—

BS ISO 26367-1

Timber structures. Structural insulated panels. Basic requirements for testing walls

Intelligent transport systems. Communications access for land mobiles (CALM). Application management

Fundamentals

BS ISO 24101-2

BS ISO 27185

Conformance test EPL/278

Cardiac rhythm management devices. Symbols to be used with cardiac rhythm management device labels, and information to be supplied. General information

BS ISO 24343:—

CH/150/6

B/518

BS ISO 22610 (Revision) Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration will supersede BS EN ISO 22610:2006 PH/3/3

PD ISO/TR 22849 Bevel and hypoid gears. Application and manufacturing recommendations MCE/5/-/13

Resilient and laminate floor coverings. Determination of indentation and residual indentation

BS ISO 24343-2 Resilient floor covering. Short-term residual indentation

FSH/16

BS ISO 27487 Auto-injectors for medical use. Requirements and test methods CH/84

PRI/3

BS ISO 27608 BS ISO 22901:— Road vehicles. Open diagnostic data exchange (ODX)

Resilient floor coverings. Semi-flexible/vinyl composition tiles. Indentation

Animal and vegetable fats and oils. Determination of Lovibond colour. Automatic method

PRI/3

AW/307

BS ISO 24409:—

BS ISO 27877

Ships and marine technology. Design, location, and use of shipboard signs for fire protection, life-saving appliance, and means of espace

Concepts of precision and uncertainty for qualitative data

BS ISO 24343-3

BS ISO 22901-2 Emissions-related diagnostic data AUE/16

BS ISO 23269:— Ships and marine technology. Breathing apparatus for ships

SS/6/-/1

BS ISO 24409-2 Catalogue

BS ISO 28002

SME/32/-/1

Specification for security management for the supply chain. Resilience in security in the supply chain

BS ISO 23269-2 Breathing apparatus for shipboard firefighters SME/32/-/1

BS ISO 23269-3 Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes

BS ISO 24631:— Radio frequency identification of animals

BS ISO 24631-6 Representation of the animal identification information (numeric displaying/communication)

SME/32

BS ISO 28005 Ships and marine technology. Computer applications. Electronic port clearance (EPC)

SME/32/-/1

AGE/6/1

SME/32/-/10

BS ISO 23461

BS ISO 24679

Space systems. Programme management. Non conformance control system

DD ISO/TS 28037

Fire safety engineering. Performance of structure in fire

Use of linear calibration curves

ACE/68

FSH/24

BS ISO 23570:— Industrial automation systems and integration. Distributed installation in industrial applications

BS ISO/IEC 24763 ITLET. Conceptual reference model for competencies and related objects

SS/6

BS ISO 28401 Titanium and titanium alloys. Terms and definitions NFE/35

IST/43

BS ISO 23570-3 Power distribution bus AMT/4

PD ISO/TR 25742 Lifts (elevators). Study of the methods used for fire testing lift landing doors

DD ISO/TS 23647

MHE/4

Animal and vegetable fats and oils. Determination of wax content. Method using gas chromatography

BS ISO 25744

AW/307

BS ISO 28460 Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship to shore interface PSE/17

Escalators and moving walkways. Measurement of ride quality

BS ISO 28660 Plastics. Determination of J-R curves

MHE/4

PRI/21

BS ISO 26367:—

BS ISO 28842

Guidelines for assessing the adverse environmental impact of fire effluents

Simplified design standard for small reinforced concrete bridges

PD ISO/TR 24054 Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons (PAH). Method using gas chromatography/mass spectrometry (GC/MS)

B/525/10

AW/307



29

New Work Started continued... BS ISO 28926 Plastics. Method for determining the flammability characteristics of plastics using microcalorimetry

DD CLC/TS 61400:— Wind turbines

PRI/26

DD CLC/TS 61400-22 BS ISO 29282 Intelligent transport systems. Communications access for land mobiles (CALM). CALM using satellite communications

Conformity testing and certification of wind turbines

EPL/278

PEL/88

BS ISO/IEC TR 29410:—

DD IEC/TS 62610

ITLET. Nomadicity and Mobile Learning

Design guide. Method for determining of

BS ISO/IEC TR 29410-2

forced air-cooling structure from the aspect of

Learner Information for Mobile Learning

thermal management for cabinets in

IST/43

accordance with IEC 60297 and IEC 60917 series EPL/48

BS ISO 29501 Ships and marine technology. On shore Power supply, “Cold Ironing”

DD IEC/TS 62612

SME/32/-/3

Self-ballasted LED-lamps for general lighting

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting http://www.bsigroup.com/drafts. All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time.

services > 50 V. Performance requirements

PD ISO/TR 29662 Petroleum products and other liquids. Guide to flash point testing

CPL/34/3

PTI/13

BS ISO 80601:— BS ISO 29845

Medical electrical equipment

Technical product documentation. Document types TDW/4

BS ISO 80601-2-61

Deadlines for receipt of comments on each of the individual drafts can be found at http://www.bsigroup.com/drafts. The deadline for the following drafts is 31 March, 2009 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see ’How to order’ on page 2).

Particular requirements for the basic safety and

BS ISO 29941 Condoms. Determination of nitrosamines migrating from natural rubber latex condoms into various media

essential performance of pulse oximeter equipment for medical use

08/30188214 DC

CH/157

CH/121/5

BS 6700 AMD1 Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Specification

BS ISO 29942

PD 6531 (Revision)

B/504/2

Mechanical contraceptives. Latex barrier membranes (dams) for prophylactic use in sexual activity

Queries and interpretations on BS 5839 will supersede PD 6531:1997

CH/157 FSH/12/1

Ships and marine technology. Illustration of the location of hazardous materials onboards ships

BS SP 10 and 11:1949/Amendment 2

SME/32

Specification for washers for aircraft purposes (primarily for facing purposes)

Ships and marine technology. Guideline for measures to prevent asbestos emission and exposure at ships recycling

ACE/12

SME/32

BS SP 126 and SP

BS ISO 30021-1 General requirements

127:1959/Amendment 2 Washers for Unified hexagons for aircraft

BS 10012 Specification for the management of personal information in compliance with the Data Protection Act 1998 IDT/1

(primarily for facing purposes)

09/30188666 DC ACE/12

PAS 2012 Tests for fibre-reinforced polymer composites

Specification for M1 wheelchair accessible

PRI/21

vehicles

30

BS 8550 Guide for the auditing of water quality sampling

09/30175848 DC

FSH/22

BS ISO 30021-2

09/30169964 DC

EH/3/6

BS ISO 30007

Fire safety. Intermediate-scale fire-resistance tests

BS 8499 Specification for gas meter boxes and meter bracket GSE/25

BS ISO 30006

BS ISO 30021:—

09/30160438 DC


BS 4607-5 AMD3 Non-metallic conduits and fittings for electrical installations. Part 5. Specification for rigid conduits, fittings and components of insulating material PEL/213

Comments for the above document are required by 30 April, 2009


DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 March, 2009 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards.

08/30147932 DC

08/30169511 DC

BS ISO 23339 Space systems. Unmanned spacecraft. Requirements for estimating the mass of remaining usable propellant

BS ISO/IEC 13888-3 Information technology. Security techniques. Non-repudiation. Part 3. Mechanisms using asymmetric techniques

ACE/68/-/3

IST/33

08/30152590 DC

08/30171902 DC

BS ISO 25111 CALM using public networks. General requirements

BS EN ISO 1182 Reaction to fire tests for building and transport products. Noncombustibility test

EPL/278

FSH/21

08/30152793 DC BS IEC 62484 Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

08/30171906 DC BS EN ISO 1716 Reaction to fire tests for building and transport products. Determination of the heat of combustion FSH/21

NCE/2

08/30172616 DC 08/30156330 DC BS ISO 21072-3 Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Part 3. High viscosity oil

BS EN ISO 8536-2 Infusion equipment for medical use. Part 2. Closures for infusion bottles CH/212

SME/32/-/2

08/30173820 DC 08/30121777 DC BS ISO/IEC 19757-5 Information technology. Document Schema Definition Languages (DSDL). Part 5. Extensible datatypes IST/41

08/30157876 DC BS IEC 61526 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters NCE/2

08/30135161 DC BS ISO/IEC 18014-2 Information technology. Security techniques. Time-stamping services. Part 2. Mechanisms producing independent tokens IST/33

08/30143668 DC

08/30159225 DC BS ISO 11452-9 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Part 9. Portable transmitters AUE/16

08/30164279 DC

BS EN ISO 14005 Environmental management systems. Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

BS ISO/IEC 14443-2 Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Part 2. Radio frequency power and signal interface

SES/1/1

Comments for the above document are required by 8 March, 2009

08/30143685 DC

IST/17

BS EN ISO 19146 Geographic information. Cross-domain vocabularies IST/36

08/30174205 DC BS ISO 25112 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.16e/IEEE 802.16g EPL/278

08/30174903 DC BS ISO 25113 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using high capacity spatial division multiple access (HC-SDMA) EPL/278

08/30174980 DC BS ISO 14243-1 Implants for surgery. Wear of total knee-joint prostheses. Part 1. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

BS ISO/IEC 15961-2 Information technology. Radio frequency identification (RFID) for item management. Data protocol. Part 2. Registration of RFID data constructs

08/30164282 DC

CH/150/4

BS ISO/IEC 14443-3 Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Part 3. Initialization and anticollision

Comments for the above document are required by 28 February, 2009

IST/34

IST/17


08/30174988 DC

08/30167401 DC

CH/150/4

BS ISO 20492-3 Glass in buildings. Insulating glass. Part 3. Gas concentration and gas leakage


08/30143688 DC BS ISO/IEC 15961-3 Information technology. Radio frequency identification (RFID) for item management. Part 3. Data protocol. RFID data constructs IST/34

BS ISO 14243-2 Implants for surgery. Wear of total knee-joint prostheses. Part 2. Methods of measurement

B/520/2

08/30174997 DC 08/30147189 DC

08/30169101 DC

BS EN ISO 4787 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use

BS EN 61978-1 Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Part 1. Generic specification

LBI/36/1

GEL/86/2



BS ISO 17853 Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification CH/150/4


31

Draft British Standards for Public Comment continued... 08/30176079 DC

08/30178019 DC

08/30182014 DC

BS EN 1570 AMD2 Safety requirements for lifting tables

BS EN 13707 AMD2 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS EN 60034-24 Rotating electrical machines. Part 24. Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents. Application guide

MHE/12/-/2

B/546/1

08/30176085 DC BS EN 1756-2 AMD1 Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Part 2. Tail lifts for passengers MHE/12/-/4

08/30176091 DC BS EN 1808 AMD1 Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests MHE/12

PEL/2

08/30178313 DC BS ISO 11745 Brazing for aerospace applications. Qualification test of brazers and brazing operators. Brazing of metallic components


08/30182040 DC

WEE/-/1

BS EN ISO 1211 Milk. Determination of fat content. Gravimetric method (Reference method)

08/30180398 DC

AW/5

BS EN 60747-16-5 Semiconductor devices. Part 16-5. Microwave integrated circuits. Oscillators


08/30176094 DC

EPL/47

BS EN 1495 AMD2 Lifting platforms. Mast climbing work platforms


08/30183427 DC

08/30180629 DC

BS ISO 10924-1 Road vehicles. Circuit breakers. Part 1. Definitions and general test requirements

MHE/12/-/8

08/30176097 DC BS EN 14010 AMD1 Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages MHE/12

BS EN 61557-13 Electrical safety in low voltage distribution systems up to 1000 v A.C. and 1500 v D.C. equipment for testing, measuring or monitoring of protective measures. Part 13. Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems PEL/85

08/30176807 DC BS EN 12111 AMD1 Tunnelling machines. Road headers, continuous miners and impact rippers. Safety requirements B/513




BS ISO 10924-4 Road vehicles. Circuit breakers. Part 4. Medium circuit breakers with tabs (blade type), Form CB15 AUE/16

BS EN 15878 Steel static storage systems. Adjustable pallet racking. Terms and definitions

08/30181280 DC BS ISO 20022-6 Financial services. UNIversal Financial Industry message scheme. Part 6. Message transport characteristics

MHE/8

08/30185872 DC BS EN 933-10 Tests for geometrical properties of aggregates. Part 10. Assessment of fines. Grading of filler aggregates (air jet sieving)

08/30176943 DC

ISE/65

08/30183430 DC

08/30185791 DC

IST/12

BS ISO 23519 Sintered metal materials, excluding hardmetals. Measurement of surface roughness

AUE/16

08/30181434 DC BS EN 12159 AMD1 Builders hoists for persons and materials with vertically guided cages

B/502/6

MHE/6

08/30185875 DC BS EN 1097-8 Tests for mechanical and physical properties of aggregates. Part 8. Determination of the polished stone value

08/30176954 DC

B/502/6

BS ISO 28279 Sintered metal materials. Determination of cleanliness of metallic-powder parts

08/30185906 DC BS EN 820-4 Advanced technical ceramics. Thermomechanical properties of monolithic. Ceramics. Part 4. Determination of flexural creep deformation at elevated temperatures

ISE/65


RPI/13

08/30177409 DC BS ISO/IEC 15961-1 Information technology. Radio frequency (RFID) for item management. Data protocol. Part 1. Application interface £18.00 members, £36.00 non-members IST/34

Please do not send confirmation of orders placed by

08/30177412 DC BS ISO/IEC 15961-2 Information technology. Radio frequency identification (RFID) for item management. Data protocol. Part 2. Data encoding rules and logical memory functions £18.00 members, £36.00 non-members

telephone as it can lead to duplication

BS EN 623-5 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Part 5. Determination of phase volume fraction by evaluation of micrographs RPI/13

08/30185915 DC BS EN 820-5 Advanced technical ceramics. Thermomechanical properties of monolithic. Ceramics. Part 5. Determination of elastic moduli at elevated temperatures RPI/13

IST/34

32

08/30185909 DC



08/30185918 DC

08/30188901 DC

08/30189566 DC

BS EN 1006 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties

BS EN 13034 AMD1 Protective clothing against liquid chemicals. Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 equipment)

BS EN 14825 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions

PH/3/3


RPI/13

08/30185921 DC BS EN 1071-9 Advanced technical ceramics. Methods of test for ceramic coatings. Part 9. Determination of fracture strain RPI/13

08/30185924 DC BS EN 1071-10 Advanced technical ceramics. Methods of test for ceramic coatings. Part 10. Determination of coating thickness by cross sectioning RPI/13

08/30185977 DC BS EN 438-9 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Part 9. Classification and specifications for alternative core laminates PRI/76


RHE/4

08/30189962 DC 08/30188904 DC BS EN 14605 AMD1 Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

BS EN 13743 Safety requirements for coated abrasive products MTE/13


08/30189974 DC

PH/3/3


BS EN 13245-1 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 1. Designation of PVC-U profiles

08/30189113 DC

PRI/82

BS EN 60317-57 Specifications for particular type of winding wires. Part 57. Polyamide-imide enameled round copper wire, class 220


08/30190296 DC

GEL/55


Comments for the above document are required by

BS EN 13044-1 Swap bodies. Marking. Part 1. Markings for identification TW/1


13 March, 2009

08/30189118 DC 08/30187610 DC BS ISO/IEC 15459-8 Information technology. Automatic identification and data capture techniques. Unique identification. Part 8. Grouping of transport units

BS EN 60317-58 Specifications for particular type of winding wires. Part 58. Polyamide-imide enameled rectangular copper wire, class 220 GEL/55


08/30190299 DC BS EN 13044-2 Swap bodies. Marking. Part 2. Markings related to rail operation TW/1


IST/34

08/30188879 DC BS EN 13523-8 Coil coated metals. Test methods. Part 8. Resistance to salt spray (fog) STI/27

08/30189150 DC

08/30190302 DC

BS EN 13381-4 Test methods for determining the contribution to the fire resistance of structural members. Part 4. Applied passive protection products to steel members

BS EN 13044-3 Swap bodies. Marking. Part 3. Other operational marks

FSH/22

TW/1



08/30188882 DC BS EN 13523-29 Coil coated metals. Test methods. Part 29. Resistance to environmental soiling (Dirt pick-up and stripping)

08/30189225 DC BS EN ISO 7783 Paints and varnishes. Determination of water-vapour transmission properties. Cup method Comments for the above document are required by 28 February, 2009

Comments for the above document are required by

08/30188887 DC BS EN 933-9 Tests for geometrical properties of aggregates. Part 9. Assessment of fines. Methylene blue test B/502/6


BS EN 15885 Classification and performance characteristics of techniques for renovation and repair of drains and sewers B/505

STI/10

STI/27

28 February, 2009

08/30190305 DC

08/30189563 DC BS EN 15879-1 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling. Part 1. Direct exchange-to-water heat pumps RHE/4



08/30190311 DC BS EN 12953-6 Shell boilers. Part 6. Requirements for equipment for the boiler PVE/2


08/30190326 DC BS EN 10225 Weldable structural steels for fixed offshore structures. Technical delivery conditions ISE/12

33


08/30191153 DC

08/30192448 DC

BS EN 10238 Automatically blast-cleaned and automatically prefabrication primed structural steel products

BS EN 1555-4 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 4. Valves

BS ISO 14708-5 Implants for surgery. Active implantable medical devices. Part 5. Circulatory support devices

ISE/12

PRI/88/2

CH/150/6

08/30191156 DC


BS EN 1555-5 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 5. Fitness for purpose of the system

08/30192723 DC

08/30190505 DC BS ISO 12643-1 Graphic technology. Safety requirements for graphic technology equipment and systems. Part 1. General requirements

PRI/88/2

PAI/43

08/30191159 DC 08/30190508 DC BS ISO 12643-4 Graphic technology. Safety requirements for graphic technology equipment and systems. Part 4. Converting equipment and systems PAI/43

08/30190548 DC BS EN ISO 17054 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique ISE/18

08/30190551 DC BS ISO 10545-6 Ceramic tiles. Part 6. Determination of resistance to deep abrasion for unglazed tiles B/539

08/30190554 DC BS ISO 10545-16 Ceramic tiles. Part 16. Determination of small colour differences

BS EN 15886 Conservation of cultural property. Test methods. Colour measurement of surfaces

BS EN 71-1 AMD10 Safety of toys. Part 1. Mechanical and physical properties CW/15

08/30191140 DC BS EN 13445-4 AMD4 Unfired pressure vessels. Part 4. Fabrication

08/30191345 DC

B/526

BS EN 60728-11 Cable networks for television signals, sound signals and interactive services. Part 11. Safety EPL/100

08/30191438 DC BS EN 527-1 Office furniture. Work tables and desks. Part 1. Dimensions

PRI/88/2

08/30191147 DC BS EN 1555-2 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes

PRI/88/2

34

ACE/68/-/3

08/30193356 DC BS ISO 8724 Cork decorative panels. Specification PRI/81

08/30191462 DC BS ISO 11783-14 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 14. Sequence control


08/30193419 DC BS ISO 17631 AMD1 Ships and marine technology. Shipboard plans for fire protection, life saving appliances and means of escape

AGE/6

08/30191609 DC

SME/32/-/1

BS ISO 14708-6 Implants for surgery. Active implantable medical devices. Part 6. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) £18.00 members, £36.00 non-members


CH/150/6


BS ISO 1043-1 Plastics. Symbols and abbreviated terms. Part 1. Basic polymers and their special characteristics

08/30193650 DC BS ISO 2631-4 AMD1 Mechanical vibration and shock. Evaluation of human exposure to wholebody vibration. Part 4. Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems GME/21/6

PRI/10

08/30193841 DC

08/30192048 DC

BS EN 3475-603 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 603. Resistance to wet arc tracking

BS EN 13751 Foodstuffs. Detection of irradiated food using photostimulated luminescence AW/-/3

08/30192315 DC

BS EN 1555-3 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings

BS ISO 27875 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages


PRI/88/2

08/30191150 DC

08/30192797 DC

FW/0/3

08/30191997 DC BS EN 1555-1 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 1. General

08/30192726 DC BS EN 1538 Execution of special geotechnical work. Diaphragm walls

PVE/1

08/30191143 DC

B/526

B/560

B/539

08/30191137 DC

BS EN 1536 Execution of special geotechnical work. Bored piles

ACE/6


08/30193844 DC

BS EN 62604-2 Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers. Part 2. Guide to the use

BS EN 3475-604 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 604. Resistance to dry arc propagation

EPL/49

ACE/6





08/30193847 DC

08/30195071 DC

08/30195118 DC

BS EN 3475-605 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 605. Wet short circuit test

BS EN ISO 1927-5 Unshaped refractory materials. Part 5. Preparation and treatment of test pieces

BS EN 60335-2-30 Household and similar electrical appliances. Safety. Part 2-30. Particular requirements for room heaters

ACE/6

RPI/1

CPL/61/07


08/30195075 DC 08/30194076 DC BS ISO 21091 Health informatics. Directory services for security, communications and identification of professionals and patients

BS EN ISO 1927-6 Unshaped refractory materials. Part 6. Measurement of physical properties

BS EN 60335-2-35 AMD2 Household and similar electrical appliances. Safety. Part 2-35. Particular requirements for instantaneous water heaters

RPI/1

CPL/61/07

08/30195079 DC

08/30195149 DC

BS EN ISO 1927-7 Unshaped refractory materials. Part 7. Tests on pre-formed shapes

BS EN 60335-2-41 AMD2 Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps

IST/35


RPI/1

CPL/61/01

08/30194268 DC BS EN 61439-5 Low-voltage switchgear and controlgear assemblies. Part 5. Particular requirements for assemblies for power distribution in public networks PEL/17/3

08/30194543 DC BS ISO 2219 Thermal insulation products for buildings. Factory-made products of expanded cork (ICB). Specification PRI/81

08/30195122 DC

08/30195084 DC BS EN ISO 1927-8 Unshaped refractory materials. Part 8. Determination of complementary properties

08/30195155 DC BS EN 60335-2-59 AMD2 Household and similar electrical appliances. Safety. Part 2-59. Particular requirements for insect killers

RPI/1

CPL/61/01

08/30195090 DC

08/30195162 DC

BS EN 60745-2-15 AMD Hand-held motoroperated electric tools. Safety. Part 2-15. Particular requirements for hedge trimmers

BS EN 60335-2-73 AMD2 Household and similar electrical appliances. Safety. Part 2-73. Particular requirements for fixed immersion heaters

CPL/61/6

CPL/61/07

08/30194573 DC BS EN 60891 Procedures for temperature and irradiance corrections to measured I-V characteristics of photovoltaic devices GEL/82

08/30195093 DC BS EN 60745-2-12 AMD Hand-held motoroperated electric tools. Safety. Part 2-12. Particular requirements for concrete vibrators CPL/61/6

08/30194827 DC

08/30195168 DC BS EN 60335-2-74 AMD2 Household and similar electrical appliances. Safety. Part 2-74. Particular requirements for portable immersion heaters CPL/61/07

BS EN 61937-11 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Part 11. MPEG4 AAC and its extensions in LATM/LOAS

08/30195096 DC

EPL/100

CPL/61/6

08/30195018 DC

08/30195099 DC

BS EN 60745-2-13 AMD Hand-held motoroperated electric tools. Safety. Part 2-13. Particular requirements for chain saws

08/30195172 DC BS EN 60335-2-13 Household and similar electrical appliances. Safety. Part 2-13. Particular requirements for deep fat fryers, frying pans and similar appliances CPL/61/07

BS EN 60204-33 Safety of machinery. Electrical equipment of machines. Part 33. Requirements for semiconductor fabrication equipment £18.00 members, £36.00 non-members

BS EN 60745-2-19 AMD Hand-held motoroperated electric tools. Safety. Part 2-19. Particular requirements for jointers CPL/61/6

08/30195056 DC BS EN ISO 1927-2 Unshaped refractory materials. Part 2. Sampling for testing

BS EN 61099 Specification for unused synthetic organic esters for electrical purposes GEL/10

MCE/3


08/30195180 DC

08/30195105 DC BS EN 60335-2-2 Household and similar electrical appliances. Safety. Part 2-2. Particular requirements for vacuum cleaners and watersuction cleaning appliances

08/30195210 DC BS EN 50530 Overall efficiency of photovoltaic inverters GEL/82

CPL/61/01

RPI/1

08/30195213 DC 08/30195110 DC

BS EN 60684-3-280 Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 280. Heat shrinkable, polyolefin sleeving. Anti-tracking

BS EN ISO 1927-3 Unshaped refractory materials. Part 3. Characterization as received

BS EN 60335-2-27 Household and similar electrical appliances. Safety. Part 2-27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

RPI/1

CPL/61/01

08/30195067 DC

08/30195114 DC

BS EN ISO 1927-4 Unshaped refractory materials. Part 4. Determination of consistency of castables

BS EN 60335-2-29 AMD2 Household and similar electrical appliances. Safety. Part 2-29. Particular requirements for battery chargers

BS EN 60684-3-281 Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 281. Heat shrinkable, polyolefin sleeving. Semi conductive

RPI/1

CPL/61/01

GEL/15/5

08/30195061 DC



GEL/15/5

08/30195217 DC

35


08/30195386 DC

08/30195458 DC

BS EN 60684-3-282 Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 282. Heat shrinkable, polyolefin sleeving. Stress control

BS EN 15888 Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing

BS EN 60172 AMD2 Test procedure for the determination of the temperature index of enamelled winding wires

PVE/3/7

GEL/55

GEL/15/5



08/30195387 DC

08/30195463 DC

08/30195225 DC BS EN 60684-3-283 Flexible insulating sleeving. Part 3. Specification for individual types of sleeving. Sheet 283. Heat shrinkable, polyolefin sleeving. For bus-bar insulation GEL/15/5

BS EN ISO 11114-3 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 3. Autogeneous ignition test in oxygen atmosphere

BS ISO 105-F10 AMD1 Textiles. Tests for colour fastness. Part F10. Specification for adjacent fabric. Multifibre TCI/81

PVE/3

08/30195238 DC BS EN 62599-1 Alarm systems. Part 1. General requirements. Environmental test methods GW/1/1

08/30195242 DC BS EN 62599-2 Alarm systems. Part 2. General requirements. Electromagnetic compatibility GW/1/1


08/30195475 DC

08/30195391 DC

BS EN 60793-1-44 Optical fibres. Part 1-44. Measurement methods and test procedures. Cut-off wavelength

BS EN ISO 24534-1 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 1. Architecture

GEL/86/1


EPL/278

08/30195479 DC 08/30195334 DC BS ISO 9211-4 AMD1 Optics and optical instruments. Optical coatings. Part 4. Specific test methods CPW/172/3

08/30195341 DC

08/30195395 DC BS EN ISO 24534-2 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 2. Operational requirements EPL/278

BS EN 60793-1-30 Optical fibres. Part 1-30. Measurement methods and test procedures. Fibre proof test GEL/86/1


08/30195483 DC

BS EN 60335-2-67 AMD Household and similar electrical appliances. Safety. Part 2-67. Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use

08/30195399 DC

CPL/61/10

EPL/278


08/30195344 DC

08/30195403 DC

08/30195502 DC

BS EN 60335-2-68 AMD Household and similar electrical appliances. Safety. Part 2-68. Particular requirements for spray extraction appliances, for industrial and commercial use CPL/61/10

BS EN ISO 24534-3 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 3. Vehicle data

BS EN ISO 24534-4 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Part 4. Secure communications using asymmetrical techniques £18.00 members, £36.00 non-members EPL/278

08/30195352 DC BS EN 60335-2-69 AMD Household and similar electrical appliances. Safety. Part 2-69. Particular requirements for wet and dry vacuum cleaners, including powerbrush, for industrial and commercial use CPL/61/10

BS EN 61812-1 Time relays for industrial and residential use. Part 1. Requirements and tests EPL/94

BS EN 4008-008 Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 008. Positioner for crimping tool M22520/7-01. Product standard ACE/6


08/30195422 DC BS EN 60974-4 Arc welding equipment. Part 4. Periodic inspection and testing WEE/6


08/30195505 DC BS EN 60745-2-6 AMD Hand-held motoroperated electric tools. Safety. Part 2-6. Particular requirements for hammers CPL/61/6

08/30195355 DC BS EN 60335-2-79 AMD Household and similar electrical appliances. Safety. Part 2-79. Particular requirements for high pressure cleaners and steam cleaners CPL/61/10

08/30195376 DC BS EN ISO 3822-3 AMD1 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3. Mounting and operating conditions for in-line valves and appliances EH/1/6

36

08/30195428 DC BS EN 60519-6 Safety in electroheat installations. Part 6. Specifications for safety in industrial microwave heating equipment PEL/27


08/30195433 DC BS EN 60519-1 Safety in electroheating installations. Part 1. General requirements PEL/27



08/30195508 DC BS EN 60745-2-1 AMD Hand-held motoroperated electric tools. Safety. Part 2-1. Particular requirements for drills and impact drills CPL/61/6

08/30195511 DC BS EN 61300-3-22 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-22. Examinations and measurements. Ferrule compression force GEL/86/1


08/30195519 DC

08/30195549 DC

BS EN 4008-007 Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 007. Positioner for crimping tool M22520/2-01. Product standard

BS EN 55020 ISA Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement GEL/210/11

ACE/6


08/30195526 DC BS EN 60335-2-75 AMD Household and similar electrical appliances. Safety. Part 2-75. Particular requirements for commercial dispensing appliances and vending machines CPL/61/5

GEL/86/2

BS EN 55013 ISA Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement

08/30195624 DC

GEL/210/11

08/30195564 DC BS EN 60974-1 Arc welding equipment. Part 1. Welding power sources WEE/6

BS EN 2648 Aerospace series. Washers, concave, in alloy steel, cadmium plated


ACE/12

08/30195536 DC

08/30195574 DC BS EN 62615 Electrostatic Discharge Sensitivity Testing. Transmission Line Pulse (TLP). Component Level

BS EN 60335-2-105 AMD Household and similar electrical appliances. Safety. Part 2-105. Particular requirements for multifunctional shower cabinets

EPL/47

CPL/61/07

BS EN 62575-2 Radio frequency (RF) bulk acoustic wave (BAW) filters. Part 2. Guide to the use

08/30195539 DC BS EN 4632-004 Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Part 004. Homogeneous assemblies highly alloyed steels

08/30195578 DC

EPL/49


BS EN 60335-2-60 AMD Household and similar electrical appliances. Safety. Part 2-60. Particular requirements for whirlpool baths and whirlpool spas CPL/61/07

08/30195545 DC BS EN 60335-2-103 AMD Household and similar electrical appliances. Safety. Part 2-103. Particular requirements for drives for gates, doors and windows CPL/61/01

GEL/86/2

08/30195627 DC BS EN 50377-8-12 Connector sets and interconnect Components to be used in optical fibre communication systems. Product specifications. Part 8-12. Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category U GEL/86/2

BS EN 50377-8-13 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-13. Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category U GEL/86/2

09/30177741 DC 08/30195582 DC BS EN 3264 Aerospace series. Pipe coupling 8°30’ in titanium alloy. Thrust wire nuts ACE/12

08/30195542 DC

BS EN 50377-8-11 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-11. Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C

08/30195630 DC

ACE/61/-/2


BS EN 50377-8-10 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 8-10. Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C

08/30195552 DC

08/30195533 DC


08/30195621 DC


BS ISO 29061-1 Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems. Part 1. Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments AUE/7


08/30195587 DC BS EN 61988-2-1 Plasma display panels. Part 2-1. Measuring methods. Optical and optoelectrical

09/30178059 DC

EPL/47

CH/173/1



BS ISO 7176-9 Wheelchairs. Part 9. Climatic tests for electric wheelchairs

08/30195594 DC BS EN 61988-1 Plasma display panels. Part 1. Terminology and letter symbols EPL/47

08/30195548 DC DD ISO/TS 16949 Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations QS/1



Comments for the above document are required by 28 February, 2009 e-mail

08/30195618 DC BS EN 50325-5 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces. Part 5. Functional safety communication based on EN 50325-4

your order [email protected]

AMT/7


37

Documents Not Issued as DPCs continued... 09/30181685 DC BS EN 13042-3 AMD1 Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Part 3. IS machines MCE/3/13


DOCUMENTS NOT ISSUED AS DPCs

EN 60335-1:2002/Amendment 13

Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

CENELEC has published Amendment 13:2008 to EN 60335-1:2002 which replaces the reference in sub-clause 24.1.7 to IEC 62151 by references to EN 41003 and EN 60950-1. This will be implemented by BSI as Amendment 3 to BS EN 60335-1:2002.

09/30194969 DC BS ISO 11237 Rubber hoses and hose assemblies. Compact wire-braid reinforced hydraulic types for oil-based or water-based fluids. Specification PRI/66/-/3


EN 13042:—

CLC/TS 62271:—

EN 13042-2:2004/Amendment 1

CLC/TS 62271-304

Handling machines for feeding

Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions

EN 13042-5:2003/Amendment 1

B/509/3

The above two amendments have been circulated under the CEN UAP procedure. The texts of the UAP are available from the contact point (below).

£40.00 members, £80.00 non-members

09/30195789 DC

This standard, which will be available shortly, implements verbatim CLC/TS 62271-304:2008 which is identical to IEC/TS 62271-304:2008. Contact: Keith Stiles Email: [email protected] PEL/17/1

Email: [email protected] MCE/3/13

EN 14067:— Railway applications. Aerodynamics

IST/15


High-voltage switchgear and controlgear

Presses

Contact: Committee Service Centre BS ISO/IEC 19500-1 Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 1. CORBA interfaces

CPL/61

Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements

BS EN 12899-6 Fixed vertical road traffic signs. Part 6. Visual performance of retroreflective sheeting materials

09/30195786 DC

Contact: Geraldine Salt Email: [email protected]

09/30195606 DC


General requirements

EN 14067-4:2005/Amendment 1 Requirements and test procedures for aerodynamics on open track

ISO/DIS 26870 Space systems. Launch pad and integration site operational documents The above document has not been issued as a DPC. A copy is available on request from the Programme Manager (below). Any comments received will be considered at a later date. Contact: Christine Daws Email: [email protected]

BS ISO/IEC 19500-2 Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 2. Interoperability

The above draft amendment has been circulated by CEN/TC 256 under the shortened UAP procedure. The text of the draft amendment may be obtained from the Programme Manager (below).


Contact: Tim Newins

IST/15

Email: [email protected]


RAE/1

ACE/68/-/3

ISO/FDIS 2250 Finishing reamers for morse and metric tapers, with cylindrical shanks and morse taper shanks A copy of the above document is available from the contact point (below). Contact: Committee Service Centre

EN ISO 16484:—


09/30195792 DC

Building automation and control systems

MTE/5

BS ISO/IEC 19500-3 Information technology. Open distributed processing. Common Object Request Broker Architecture (CORBA) specification. Part 3. Components

EN ISO 16484-5:2008/Amendment 1

ISO/IEC 19775:—

Data communication protocol

Information technology. Computer graphics and image processing. Extensible 3D (X3D)

£33.00 members, £66.00 non-members IST/15


09/30196098 DC BS EN 61003-2 Industrial-process control systems. Instruments with analogue inputs and two or multi-state outputs. Part 2. Guidance for inspection and routine testing

This draft amendment has been submitted to CEN members for Unique Acceptance Procedure. Copies can be obtained under the reference RHE/2_09_0001 from the contact point (below), to which comments should be submitted by 10 February, 2009. Contact: Committee Service Centre Email: [email protected] RHE/16

ISO/IEC 19775-2 Scene access interface (SAI) This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. This has not been circulated as a Draft for Public Comment (DPC) but copies of the text are available from the Programme Manager (below). Comments should be made by 11 March, 2009.

GEL/65/2

EN 60335:—

Contact: Jean Stride


Household and similar electrical appliances. Safety

IST/37

38




prEN ISO 2740 (ISO/FDIS 2740:2008) Sintered metal materials, excluding hardmetals. Tensile test pieces This European Standard has not been issued as a Draft for Public Comment. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] ISE/65

prEN ISO 10555:— Sterile, single-use intravascular catheters

CEN EUROPEAN STANDARDS

EN 1494:2000+A1:2008

EUROPEAN RATIFIED TEXTS

MHE/12

The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

Mobile or movable jacks and associated lifting equipment

EN 1858:2008 Chimneys. Components. Concrete flue blocks B/506

EN 1990:— Eurocode. Basis of structural design AMENDMENT 1:CORRIGENDUM 1:December 2008

to EN 1990:2002 prEN ISO 10555-1 General requirements

B/525/1

EN 583:— Non-destructive testing. Ultrasonic examination

The above document has been circulated at UAP stage. The text is available from the contact point (below). Contact: Committee Service Centre Email: [email protected] CH/84

prEN ISO 11102:— Reciprocating internal combustion engines. Handle starting equipment

EN 583-6:2008 Time-of-flight diffraction technique as a method for detection and sizing of discontinuities WEE/46

EN 12487:— Corrosion protection of metals. Rinsed and nonrinsed chromate conversion coatings on aluminium and aluminium alloys CORRIGENDUM 1:October 2008

to EN 12487:2007 STI/38

EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels

EN 12983:—

GSE/27

Cookware. Domestic cookware for use on top of a stove, cooker or hob

prEN ISO 11102-2

EN 894:—

Method of testing the angle of disengagement

Safety of machinery. Ergonomics requirements for the design of displays and control actuators

EN 12983-1:—

Due to an oversight the text of this UAP was not made available for public consultation. A copy of the text is available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] MCE/14

EN 894-3:— Control actuators

General requirements CORRIGENDUM 1:October 2008

to EN 12983-1:2000 CW/9

CORRIGENDUM 1:October 2008

to EN 894-3:2000

EN 13019:2001+A1:2008

PH/9

Machines for road surface cleaning. Safety requirements B/513

prEN 15544 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning

EN 1093:— Safety of machinery. Evaluation of the emission of airborne hazardous substances

EN 13021:2003+A1:2008 Winter service machines. Safety requirements

This draft European Standard has been submitted to CEN members for UAP. Copies can be obtained under the reference RHE/28_08_0019 from the contact point (below), to which comments should be submitted by 17 April, 2009. Contact: Committee Service Centre Email: [email protected] RHE/28

EN 1093-1:2008

B/513

Selection of test methods MCE/3

EN 13363:—

EN 1474:—

Solar protection devices combined with glazing. Calculation of solar and light transmittance

Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems

EN 13363-1:— Simplified method

prCEN/TR 15831

EN 1474-1:2008

CORRIGENDUM 1:December 2008

Method for testing compression in medical hosiery

Design and testing of transfer arms

to EN 13363-1:2003

GSE/38

B/540

This document has been circulated to CEN members as a Draft Technical Report by CEN/TC 205. This has not been circulated as a Draft for Public Comment (DPC) but copies of the text are available from the Programme Manager (below). Contact: Philippa Younas Email: [email protected] CH/205/1


EN 1474-3:2008 Offshore transfer systems GSE/38

EN 13414:— Steel wire rope slings. Safety

EN 1493:1998+A1:2008

EN 13414-3:2003+A1:2008

Vehicle lifts

Grommets and cable-laid slings

MHE/12

MHE/2


39

CEN Reports

EN 13445:— Unfired pressure vessels

EN 13445-3:— Design AMENDMENT 16:December 2008

to EN 13445-3:2002 PVE/1

EN 15095:2007+A1:2008

CWA 15899:2008

Power-operated mobile racking and shelving, carousels and storage lifts. Safety requirements

Standardization of an innovation capability rating for SMEs

MHE/14

no current standard is superseded £69.00 members, £138.00 non-members

EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements MCE/3/5

EN 15507:2008 EN 13696:2008 Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance

Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades

EN 15644:2008

Timber structures. Strength graded structural timber with rectangular cross section

Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements

CENELEC PUBLICATIONS

EN 15704:2008 Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water CII/37


MCE/6

EN 14604:—

CEN/TS 15790:2008

AW/10

PRI/24

to EN 14343:2005

CEN TECHNICAL SPECIFICATIONS

EN 15702:2008 Machine grading. Grading machine settings for machine controlled systems

Rotary positive displacement pumps. Performance tests for acceptance

B/524

Animal feeding stuffs. PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast)

EN 14081-4:2005+A4:2008

EN 14343:—

Precast concrete products. Concrete finishes. Identification

B/543

Cellular plastics. Cell count procedure for flexible and rigid polyurethane

B/518

CEN/TR 15739:2008

PKW/0

B/543

EN 14081:—

CEN REPORTS

EN 15800:2008 Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springs GME/15

Smoke alarm devices

EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.


to EN 14604:2005 FSH/12/2

EN 14710:— Fire-fighting pumps. Fire-fighting centrifugal pumps without primer

CEN WORKSHOP AGREEMENTS CWA 14747:—

Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz-300 GHz)

Humanitarian mine action. Test and evaluation

GEL/106

CWA 14747-2:2008 EN 14710-1:2005+A2:2008 Classification, general and safety requirements FSH/17/4

EN 14710-2:2005+A2:2008

EN 50413:2008

Soil characterization for metal detector and ground penetrating radar performance no current standard is superseded £84.00 members, £168.00 non-members

EN 50499:2008 Procedure for the assessment of the exposure of workers to electromagnetic fields GEL/106

CWA 15896:—

EN 60519:—

Value added purchasing management

Safety in electroheat installations

CWA 15896-1:2008 General criteria

EN 60519-7:2008 (IEC 60519-7:2008)

no current standard is superseded £34.00 members, £68.00 non-members

Particular requirements for installations with electron guns

Verification of general and safety requirements FSH/17/4

EN 14890:— Application Interface for smart cards used as Secure Signature Creation Devices

PEL/27

CWA 15896-2:2008 EN 14890-1:2008 Basic services IST/17

40

Accredited structure and process for certification bodies no current standard is superseded £34.00 members, £68.00 non-members


EN 60670:— Boxes and enclosures for electrical accessories for household and similar fixed electrical installations


IEC Publications continued... EN 60670-23:2008 (IEC 60670-23:2006) Particular requirements for floor boxes and enclosures PEL/23

EN 62271:—

CENELEC HD 60364-1:2008

High-voltage switchgear and controlgear

(IEC 60364-1:2005)

EN 62271-1:2008 (IEC 62271-1:2007) Common specifications

EN 60700:—

PEL/17/1

Thyristor valves for high-voltage direct current (HVDC) power transmission

EN 60700-1:— (IEC 60700-1:1998/A2:2008) Electrical testing AMENDMENT 2:December 2008

to EN 60700-1:1998

EN 62431:2008 (IEC 62431:2008) Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods EPL/46/2

PEL/22

CENELEC REPORTS

EN 60794:— Optical fibre cables

EN 60794-2-30:2008 (IEC 60794-2-30:2008) Indoor cables. Family specification for ribbon cables GEL/86/1

CLC/TR 50378:—

Outdoor cables

CLC/TR 50378-2-1:2008

GEL/86/2

EN 60794-3-40:2008 (IEC 60794-3-40:2008) Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

CLC/TR 50515:2008 List of interpretations on published standards on “Alarm Systems”

JPEL/64

IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)

IEC 60079:— Explosive atmospheres

IEC 60079-10-1:2008 Classification of areas. Explosive gas atmospheres £125.00 members, £208.00 non-members GEL/31/11

GW/1/2

IEC 60332:—

GEL/86/1

EN 60794-3-50:2008 (IEC 60794-3-50:2008) Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes GEL/86/1

EN 60794-3-60:2008 (IEC 60794-3-60:2008) Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes

CLC/TR 61158:—

Tests on electric and optical fibre cables under fire conditions

Industrial communication networks. Fieldbus specifications

IEC 60332-3:— CLC/TR 61158-1:2008 (IEC/TR 61158-1:2007)

Test for vertical flame spread of verticallymounted bunched wires or cables

Overview and guidance for the IEC 61158 and IEC 61784 series

IEC 60332-3-10:—

AMT/7

Apparatus AMENDMENT 1:December 2008

GEL/86/1

to IEC 60332-3-10:2000

Help Us to Help You! Always quote your Customer Number Don’t know your number? Contact Customer Services 020 8996 9001

CENELEC TECHNICAL SPECIFICATIONS


CLC/TS 50131:—

IEC 60332-3-22:—

Alarm systems. Intrusion and hold-up systems

Category A

GEL/20/18

AMENDMENT 1:December 2008

CLC/TS 50131-7:2008 Application guidelines GW/1/2

HARMONIZATION DOCUMENTS

to IEC 60332-3-22:2000 £11.00 members, £18.00 non-members GEL/20/18

IEC 60332-3-23:— Category B AMENDMENT 1:December 2008

to IEC 60332-3-23:2000

who will be happy to check it for you

42


Passive components to be used in optical fibre communication systems. Product specifications

SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre

EN 60794-3:—

Fundamental principles, assessment of general characteristics, definitions

CENELEC HD 60364:—


Low-voltage electrical installations

GEL/20/18



IEC 60332-3-24:—

IEC 60519:—

IEC 61000:—

Safety in electroheat installations

Electromagnetic compatibility (EMC)

IEC 61000-4:— Category C

IEC 60519-4:—

Testing and measurement techniques

Particular requirements for arc furnace installations CORRIGENDUM 1:December 2008

to IEC 60519-4:2006

IEC 61000-4-2:2008 (Edition 2) Electrostatic discharge immunity test £125.00 members, £208.00 non-members

PEL/27


GEL/210/12

IEC 60730:— Automatic electrical controls for household and similar use

to IEC 60332-3-24:2000

IEC 61000-4-17:— Ripple on D.C. input power port immunity test AMENDMENT 2:December 2008

to IEC 61000-4-17:2002 £10.00 members, £17.00 non-members

IEC 60730-2-5:— Particular requirements for automatic electrical burner control systems £11.00 members, £18.00 non-members

GEL/210/12

AMENDMENT 2:November 2008

IEC 61249:—

to IEC 60730-2-5:2004

Materials for printed boards and other interconnecting structures

£52.00 members, £87.00 non-members CPL/72

IEC 61249-2-38:2008

GEL/20/18

IEC 60749:— Semiconductor devices. Mechanical and climatic test methods

Reinforced base materials clad and unclad. Nonhalogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly £57.00 members, £95.00 non-members EPL/501

IEC 60332-3-25:—

Category D

IEC 60749-20:2008 (Edition 2)

IEC 61300:—

Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat £68.00 members, £113.00 non-members

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

EPL/47

IEC 61300-3-6:2008 (Edition 3)

IEC 60779:— Industrial electroheat equipment. Test methods for electroslag remelting furnaces AMENDMENT 1:December 2008

Examinations and measurements. Return loss £68.00 members, £113.00 non-members GEL/86/2


to IEC 60779:2005 IEC 61347:—

PEL/27

Lamp controlgear

to IEC 60332-3-25:2000

IEC 60915:— Fixed capacitors for use in electronic equipment Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components



to IEC 60915:2006 EPL/40X

GEL/20/18


IEC 61347-2-10:— Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) AMENDMENT 1:November 2008

to IEC 61347-2-10:2000 £12.00 members, £20.00 non-members CPL/34/3

IEC/TR 60943:—

IEC 61676:—

Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals

Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology



to IEC/TR 60943:1998

to IEC 61676:2002



PEL/32

CH/62/3


43

ISO Publications continued... IEC/TS 61850:—

IEC 62236-5:2008

ISO 2082:2008

Communication networks and systems for power utility automation

(Edition 2)

(Edition 3)

Emission and immunity of fixed power supply installations and apparatus

Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel £47.00 members, £78.00 non-members

IEC/TS 61850-80-1:2008 Guideline to exchange information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 £144.00 members, £240.00 non-members PEL/57

£52.00 members, £87.00 non-members GEL/9

STI/33

Will be implemented as an identical British Standard

IEC 62303:2008 Radiation protection instrumentation equipment for monitoring of airborne tritium

IEC 62236:—


Railway applications. Electromagnetic compatibility

NCE/2

IEC 62321:2008 IEC 62236-1:2008 (Edition 2) General £33.00 members, £55.00 non-members GEL/9

Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) £141.00 members, £235.00 non-members GEL/111

IEC 62236-2:2008 (Edition 2) Emission of the whole railway system to the outside world £63.00 members, £105.00 non-members GEL/9

ISO 2439:2008 (Edition 4) Flexible cellular polymeric materials. Determination of hardness (indentation technique) £44.00 members, £73.00 non-members PRI/24


ISO 2471:2008 (Edition 4) Paper and board. Determination of opacity (paper backing). Diffuse reflectance method £32.00 members, £53.00 non-members

IEC 62496:—

PAI/11

Optical circuit boards


IEC 62496-1:2008 General

ISO 3937:— Cutter arbors with tenon drive

IEC 62236-3:—


Rolling stock

GEL/86

IEC 62236-3-1:2008

IEC 62499:2008

MTE/5

(Edition 2)


Train and complete vehicle £46.00 members, £77.00 non-members

Railway applications. Current collection systems. Pantographs testing methods for carbon contact strips

GEL/9


Dimensions of 7/24 taper £32.00 members, £53.00 non-members

GEL/9

Apparatus £57.00 members, £95.00 non-members GEL/9

IEC 62236-4:2008 (Edition 2) Emission and immunity of the signalling and telecommunications apparatus £41.00 members, £68.00 non-members

Dimensions of Morse taper £24.00 members, £40.00 non-members

ISO 3937-2:2008

MTE/5

IEC 62236-3-2:2008 (Edition 2)

ISO 3937-1:2008


ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

ISO 5631:— Paper and board. Determination of colour by diffuse reflectance

ISO 5631-2:2008 Outdoor daylight conditions (D65/10°) £36.00 members, £60.00 non-members PAI/11


GEL/9

ISO 148:— Metallic materials. Charpy pendulum impact test

ISO 5631-3:2008 Indoor illumination conditions (D50/2°) £36.00 members, £60.00 non-members PAI/11


ISO 148-3:2008 e-mail your order [email protected]

44

(Edition 2)

ISO 6884:2008

Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

(Edition 2)


Animal and vegetable fats and oils. Determination of ash £24.00 members, £40.00 non-members

ISE/NFE/4/4

AW/307

Will not be implemented as a British Standard




ISO Publications continued... ISO 7263:2008

ISO/IEC 9594-3:—

ISO 10406-2:2008

(Edition 3)

Abstract service definition

FRP sheets



to ISO/IEC 9594-3:2001

B/525/2

IST/6


Corrugating medium. Determination of the flat crush resistance after laboratory fluting £32.00 members, £53.00 non-members PAI/11



ISO 8116:— Textile machinery and accessories. Beams for winding

ISO 8116-2:2008 (Edition 3) Warper’s beams £28.00 members, £47.00 non-members

ISO/IEC 9594-3:—

ISO/TR 11044:2008

Abstract service definition CORRIGENDUM 2:December 2008

Water quality. Scientific and technical aspects of batch algae growth inhibition tests

to ISO/IEC 9594-3:2001


IST/6

EH/3/5



ISO/IEC 9798:—

ISO/IEC 11976:2008

Information technology. Security techniques. Entity authentication

Information technology. Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges Capacity: 60 Gbytes per cartridge Second generation

TCI/33


ISO/IEC 9798-2:2008 (Edition 3)

£122.00 members, £203.00 non-members ICT/-/1

Weaver’s beams

Mechanisms using symmetric encipherment algorithms £47.00 members, £78.00 non-members


IST/33

TCI/33


ISO 8116-3:2008 (Edition 3)


ISO 8116-4:2008 (Edition 3) Test methods and quality classification of flanges for weaver’s beams, warper’s beams and sectional beams

ISO 10058:— Chemical analysis of magnesite and dolomite refractory products (alternative to the x-ray fluorescence method)

TCI/33

Apparatus, reagents, dissolution and determination of gravimetric silica £41.00 members, £68.00 non-members

ISO 12637-2:2008 Prepress terms £47.00 members, £78.00 non-members

ISO/TS 13399:— Cutting tool data representation and exchange

RPI/1


(Edition 3)

ISO/TS 13399-100:2008 (Edition 2)

Sectional beams for warp knitting machines £24.00 members, £40.00 non-members

ISO 10058-2:2008

TCI/33

Wet chemical analysis £53.00 members, £88.00 non-members


Graphic technology. Vocabulary


ISO 10058-1:2008

ISO 8116-5:2008

ISO 12637:—

PAI/43

£36.00 members, £60.00 non-members Will be implemented as an identical British Standard


RPI/1


ISO 9523:2008

Definitions, principles and methods for reference dictionaries £86.00 members, £143.00 non-members MTE/18


(Edition 2) Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods £50.00 members, £83.00 non-members SW/136


ISO 10058-3:2008 Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) £44.00 members, £73.00 non-members


£104.00 members, £173.00 non-members MTE/18


ISO/IEC 14496:— ISO 10406:— Fibre-reinforced polymer (FRP) reinforcement of concrete. Test methods

ISO/IEC 9594-2:— Models

Usage guidelines


RPI/1

ISO/IEC 9594:— Information technology. Open Systems Interconnection. The Directory

ISO/TS 13399-150:2008

Information technology. Coding of audio-visual objects

ISO/IEC 14496-2:— ISO 10406-1:2008

Visual CORRIGENDUM 3:November 2008

to ISO/IEC 9594-2:2001

FRP bars and grids £74.00 members, £123.00 non-members

IST/6

B/525/2

IST/37




46


to ISO/IEC 14496-2:2004


ISO Publications continued... ISO/IEC 14496-3:—

ISO/IEC TR 15504:—

ISO/IEC 19757-2:2008

Audio

Information technology. Process assessment

(Edition 2)

to ISO/IEC 14496-3:2005

ISO/IEC TR 15504-7:2008

Regular-grammer-based validation. RELAX NG £77.00 members, £128.00 non-members

IST/37

Assessment of organizational maturity

IST/41



Will be implemented as an identical British Standard by amendment to a National Standard


IST/15


ISO/IEC 19757-8:2008

ISO/IEC 14496-5:— Reference software

ISO/IEC 15938:—


Information technology. Multimedia content description interface

to ISO/IEC 14496-5:2001

IST/41


Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO/IEC 15938-12:2008

Scene description and application engine

£113.00 members, £188.00 non-members Will not be implemented as a British Standard. Is approved as suitable for use in the UK

IST/37


ISO 14691:2008 (Edition 2) Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. General-purpose applications £68.00 members, £113.00 non-members PSE/17/-/6


ISO 15011:— Health and safety in welding and allied processes. Laboratory method for sampling fume and gases

ISO 15971:2008 Natural gas. Measurement of properties. Combustion properties. Calorific value and Wobbe index £82.00 members, £137.00 non-members PTI/15

Digital Item Adaptation AMENDMENT 1:December 2008

£36.00 members, £60.00 non-members B/520/4


ISO/TR 17252:2008 Fire tests. Applicability of reaction to fire tests to fire modeling and fire safety engineering



ISO 17334:2008

WEE/40

Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding


£36.00 members, £60.00 non-members STI/33

ISO/IEC 15444-9:—


ISO/IEC 21000-7:— Digital Item Adaptation CORRIGENDUM 1:December 2008

to ISO/IEC 21000-7:2007 IST/37


ISO 21809:— Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems

Please

to ISO/IEC 15444-9:2005

(Edition 2)

IST/37

Test methods for air interface communication at 860 MHz to 960 MHz




IST/37

ISO/IEC 19757:—


Information technology. Document Schema Definition Language (DSDL)

48

IST/37

Information technology. Radio frequency identification device conformance test methods

ISO/IEC TR 18047-6:2008

Extensions for three-dimensional data £82.00 members, £137.00 non-members




ISO/IEC 15444-10:2008

to ISO/IEC 21000-7:2007


Interactivity tools, APIs and protocols


Information technology. Multimedia framework (MPEG-21)

Glass in building. Glazing and airborne sound insulation. Measurement of the mechanical impedance of laminated glass

Fume data sheets

Information technology. JPEG 2000 image coding system

ISO/IEC 21000:—

ISO/IEC 21000-7:—

FSH/22

ISO/IEC 15444:—


ISO 16940:2008

ISO 15011-4:—


Information technology. Open Distributed Processing. Use of UML for ODP system specifications £113.00 members, £188.00 non-members



to ISO 15011-4:2006

ISO/IEC 19793:2008

IST/15


to ISO/IEC 14496-11:2005


Query format IST/37

ISO/IEC 14496-11:—

Document Semantics Renaming Language (DSRL) £53.00 members, £88.00 non-members


do not send confirmation of orders placed by telephone as it can lead to duplication


ISO 21809-3:2008

ISO/IEC TR 24770:2008

ISO/IEC 29341-4-3:2008

Field joint coatings

Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz £36.00 members, £60.00 non-members

Media Service Device £58.00 members, £97.00 non-members

£104.00 members, £173.00 non-members PSE/17/2


IST/6


IST/34

ISO/IEC 23000:—


Information technology. Multimedia application format (MPEG-A)

ISO/IEC 29341-4-4:2008 Audio Video Data Structures £53.00 members, £88.00 non-members

ISO/IEC 25012:2008

IST/6



Software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Data quality model £44.00 members, £73.00 non-members

IST/37

IST/15



ISO/IEC 23000-8:2008 Portable video application format

ISO/IEC 29341-4-10:2008 Audio Video Transport Service £104.00 members, £173.00 non-members IST/6

ISO/IEC 23000-9:— Digital Multimedia Broadcasting application format CORRIGENDUM 1:December 2008

to ISO/IEC 23000-9:2008 IST/37


ISO/IEC 25434:2008 (Edition 3) Information technology. Data interchange on 120 mm and 80 mm optical disk using +R DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 16x) £129.00 members, £215.00 non-members

Building environment design. Guidelines to assess energy efficiency of new buildings

Geosynthetics. Determination of compression behaviour


ISO 25619-1:2008


Compressive creep properties £53.00 members, £88.00 non-members

PRI/66


IST/6

ISO/IEC 29341-4-12:2008 Content Directory Service £122.00 members, £203.00 non-members IST/6


RHE/2


Connection Manager Service £77.00 members, £128.00 non-members


ISO 25619:—

Thermoplastics hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification

ISO/IEC 29341-4-11:2008


ICT/-/1

ISO 23045:2008

ISO 23297:2008


B/553


ISO/IEC 29341-4-13:2008 Rendering Control Service £98.00 members, £163.00 non-members IST/6


ISO 25619-2:2008 Determination of short-term compression behaviour £32.00 members, £53.00 non-members B/553



ISO/IEC 29341-4-14:2008 Scheduled recording service £144.00 members, £240.00 non-members IST/6


Information technology. Biometrics. Jurisdictional and societal considerations for commercial applications

ISO 28941:—

ISO/IEC TR 24714-1:2008

ISO 28941-1:2008

ISO/IEC 29341-5-1:2008

General guidance £61.00 members, £102.00 non-members

Designation system and basis for specifications £36.00 members, £60.00 non-members

Digital Security Camera Device £28.00 members, £47.00 non-members

IST/44

PRI/82

IST/6




ISO/IEC TR 24769:2008

ISO/IEC 29341:—

Information technology. Real-time locating system (RTLS) device conformance test methods. Test methods for air interface communication at 2,4 GHz £68.00 members, £113.00 non-members IST/34

Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials

ISO/IEC 29341-5:— Digital Security Camera Device Control Protocol

Information technology. UPnP Device Architecture e-mail

ISO/IEC 29341-4:— Audio Video Device Control Protocol

your order [email protected]




49

ISO Publications continued... ISO/IEC 29341-5-10:2008

ISO/IEC 29341-6-15:2008

ISO/IEC 29341-8-3:2008

Digital Security Camera Motion Image Service £50.00 members, £83.00 non-members

Temperature Sensor Service £36.00 members, £60.00 non-members

Wide Area Network Device £32.00 members, £53.00 non-members

IST/6

IST/6

IST/6



ISO/IEC 29341-5-11:2008 Digital Security Camera Settings Service £47.00 members, £78.00 non-members IST/6


ISO/IEC 29341-6-16:2008 Temperature Setpoint Service £44.00 members, £73.00 non-members IST/6


ISO/IEC 29341-8-4:2008 Wide Area Network Connection Device £36.00 members, £60.00 non-members IST/6



ISO/IEC 29341-5-12:2008

ISO/IEC 29341-8-5:2008

Digital Security Camera Still Image Service £47.00 members, £78.00 non-members

ISO/IEC 29341-6-17:2008

IST/6



IST/6

User Operating Mode Service

IST/6


ISO/IEC 29341-6:— Heating, Ventilation and Air Conditioning Device Control Protocol

ISO/IEC 29341-6-1:2008 ISO/IEC 29341-7-1:2008

IST/6


ISO/IEC 29341-6-2:2008


Control Valve Service £41.00 members, £68.00 non-members

ISO/IEC 29341-8-11:2008 Layer 3 Forwarding Service £36.00 members, £60.00 non-members IST/6

ISO/IEC 29341-7-2:2008


Dimmable Light Device £28.00 members, £47.00 non-members IST/6

ISO/IEC 29341-6-10:2008


Binary Light Device


IST/6

Local Area Network Host Configuration Management Service £53.00 members, £88.00 non-members IST/6

System Device £28.00 members, £47.00 non-members

Zone Thermostat Device £28.00 members, £47.00 non-members


ISO/IEC 29341-8-10:2008 ISO/IEC 29341-7:— Lighting Device Control Protocol


Wireless Local Area Network Access Point Device £41.00 members, £68.00 non-members


ISO/IEC 29341-8-12:2008 Link Authentication Services £61.00 members, £102.00 non-members IST/6


ISO/IEC 29341-7-10:2008

IST/6

Dimming Service

ISO/IEC 29341-8-13:2008



Radius Client Service £36.00 members, £60.00 non-members


IST/6

ISO/IEC 29341-6-11:2008 Fan Operating Mode Service £36.00 members, £60.00 non-members IST/6



ISO/IEC 29341-7-11:2008 Switch Power Service £32.00 members, £53.00 non-members IST/6

ISO/IEC 29341-6-12:2008


Fan Speed Service £41.00 members, £68.00 non-members IST/6


ISO/IEC 29341-6-13:2008 House Status Service £44.00 members, £73.00 non-members

ISO/IEC 29341-8:— Internet Gateway Device Control Protocol

ISO/IEC 29341-8-1:2008

You! Always quote your Customer Number

Internet Gateway Device £36.00 members, £60.00 non-members

IST/6

IST/6



ISO/IEC 29341-6-14:2008

ISO/IEC 29341-8-2:2008

Setpoint Schedule Service £44.00 members, £73.00 non-members

Local Area Network Device

IST/6

IST/6



50

Help Us to Help



Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
