Fendt 411 Vario. 115 hp 85 kW. Fendt 412 Vario. 125 hp 92 kW. Fendt 413 Vario.
135 hp 99 kW. Fendt 414 Vario. 145 hp 107 kW. Fendt 415 Vario. 155 hp 114 ...
Fendt 400 Vario
A powerful family
With the 400 Vario, Fendt offers the perfect all-round tractor for mixed and grassland farms. Lightweight, compact and manoeuvrable, it represents the award-winning Vario stepless drive in the middle power segment between 115 and 155 HP maximum power. Optionally, it can also be equipped with all the technology that was until now reserved for the upper mid-sized class and high horsepower tractors. With a broad operating spectrum, it maximises utilisation in agricultural contracting businesses or cooperatives – without compromises. Its particular strength lies in PTO operations. Its exceptional manoeuvrability is a special benefit, particularly in areas with smaller farms. 2
Fendt 411 Vario
115 hp
85 kW
Fendt 412 Vario
125 hp
92 kW
Fendt 413 Vario
135 hp
99 kW
Fendt 414 Vario
145 hp
107 kW
Fendt 415 Vario
155 hp
114 kW
Maximum power acc. to ECE R24 3
Contents Introduction Economical vehicle concept Comfort cab with well-planned driver station Simple, intelligent operation Engines for maximum economy Vario transmission – benefits in all areas Cutaway view 400 Vario Ride comfort and safety
2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17
Tyres, 4WD and differential locks PTO drives Powerful hydraulics Front loader operation like a wheeled loader Extra Fendt features Services offered Technical specifications Standard and optional equipment
18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 31
High productivity starts with low costs per hour Low costs per hour In order to compare the actual costs involved in investing in a tractor, the overall costs and operating costs per hour or hectare must be considered. These include fuel consumption, which is the single greatest factor amounting to over 50% of costs, write-off, including resale value, servicing, repairs and miscellaneous costs such as insurance or housing.
One joystick instead of many levers With the joystick, you can accelerate the 400 Vario from standstill to the desired speed steplessly. Move the joystick in the opposite direction, and the tractor decelerates. Stepless from 0-50 km/h forward and 0-40 km/h reverse – without crawler or group gears.
II --
50 40
111%
I
30
+
+
20 10
100%
II 30
--
I
0
20 10 0
72% fuel costs
59%
overall costs
write-off / interest 32%
30%
servicing 2% repairs 4% other 3%
Competitor Fendt
Sample calculation that appeared in top agrar 12/2004, based on fuel consumption data for a Fendt Vario and a competitor’s tractor. (Competitor’s fuel consumption is 4.4 litres per hour more than Fendt’s). Calculations based on a diesel price of 1 euro per litre and 8000 operating hours in 10 years.
Superior productivity – the added-value of a stepless drive
Farm type Mixed production Fodder production Market crop production
Area (ha) Operating time 50 100 200 50 100 200 50 100 200
-2.7% -3.3% -4.3% -6.8% -6.6% -5.5% -4.4% -4.6% -4.4%
Fuel saved 6.5% 6.5% 6.8% 8.7% 8.3% 8.0% 6.5 % 6.4% 6.4 %
Compared to drive concepts with power shift transmissions, the stepless drive technology offers savings potential for all types and sizes of farming businesses. Source: Landwirtschaftliches Wochenblatt Westfalen-Lippe, 5/2001
The success of modern farming businesses depends on economically optimised production procedures. A top requirement here is the use of suitable mechanisation. With the 400 Vario, Fendt offers an extremely productive and economical universal machine for low-cost handling of all work waiting to be done.
Powerful all-rounder The 400 Vario range has been developed further in all important areas, power has been increased and the range has been expanded with further models. The result is an exceptionally compact tractor in the medium power class, with enormous power reserves. The tyre options have been adapted to optimise power transfer and soil protection.
4
• Excellent power-to-weight ratio of 35 kg/hp (415 Vario) • High payload reserves thanks to permissible gross weight of: • 9000 kg (411 - 413 Vario) • 9500 kg (414 - 415 Vario) • Latest high horsepower tractor technology for the drive train ensures low operating costs • Low variable costs through low fuel consumption (203 g/kWh for 415 Vario) • Absolute productivity and profitability in the overall cost calculation
Basic equipment or fully equipped? In the basic version, the 400 Vario is equipped with all the main Variotronic features – including electric proportional valves. Optionally you can configure the 400 Vario with all the enhanced functions. For example, you can equip the 400 Vario with TMS and the headland management Variotronic TI, the technical highlights of state-of-the-art high-horsepower tractors.
5
Impressive profitability An excellent return on investment is the key benefit of Vario tractors. The initially higher purchase price is offset by higher performance and lower fuel costs during every hour of operation. A further plus in the overall profitability calculation is the good resale value of a Fendt. Benefit from the exceptional overall profitability of the 400 Vario!
Also available for the compact class with all the convenience The Fendt Varioterminal: Information and command centre Colour information display Display bar for menu navigation
Pushbuttons for menu navigation
Rotary control for fine adjustments
The multiple award-winning Fendt Varioterminal offers you simple and logical controls. It makes simple operations even easier and also aids the experienced driver during complex operations. This is where you make fine adjustments to all the EPC and hydraulic control valve functions, program engine speeds and the cruise control memories and adapt the automatic maximum output control to your work. These settings can be saved permanently for four different operations or implements. Moreover, the Varioterminal contains an on-board computer that logs all important parameters, such as the distance driven or area worked, and has a standard-equipped fuel consumption indicator as well. Ergonomics paired with well thought-out operating logic on the right-hand side console Crossgate lever for 2 electric proportional control valves
Multi-function joystick
Engine speed memory keys
4WD/differential lock engagement
Front axle suspension and cruise control preselection
EPC rear power lift controls and rear PTO engagement
PTO speed preselection
Hand throttle
Ever-increasing working hours at a stretch and higher tractor utilisation require optimum working conditions to aid in protecting the driver’s health and combating fatigue. The 400 Vario meets this objective perfectly. Well thought-out ergonomics and a logical, productive control philosophy simplify all the work waiting to be done.
Welcome to a first-rate workplace In the cab on the 400 Vario, all control elements are grouped logically and arranged ergonomically so that you can concentrate better on the essentials while driving on the road or working in the field. All the control elements for the rear power lift and PTO engagement are integrated in the right-hand side console. Directly next to them are the hand throttle and the membrane keypad for the controls for the 4WD, differen-
6
• Tidy cab design that concentrates on the essentials • Pleasantly quiet work place; free-standing exhaust is isolated from the cab • Perfect ergonomics and logical controls • Height and tilt-adjustable steering wheel • Comfort engagement controls with automatic modes for 4WD, differential locks and PTO • Varioterminal for fine adjustments • TMS and Variotronic TI available as option • Fold-down passenger seat
tial locks, front axle suspension, cruise control preselection and PTO speeds. In addition to transmission controls, the joystick, which is integrated in the right armrest, also includes the control keys for 2 hydraulic valves and the activating keys for the automatic functions. Also integrated in the armrest are the engine speed memory keys and the crossgate lever.
7
Optionally available with high horsepower tractor technology The 400 Vario is available with the optional TMS Tractor Management System and Variotronic TI Headland Management System They allow you to carry out your work easier and more comfortably. Whether you are a beginner or professional, with these systems, you automatically perform your work at maximum efficiency and have more time to monitor your implements.
Operating comfort that you will appreciate more with every working hour
C
The top choice for operating comfort Push the joystick forward to accelerate the Vario. To slow down, simply pull the speed control lever back again. Driving in reverse is just as easy – only the other way around. Do you need to reverse quickly? Simply move the joystick to the left – the Vario decelerates to a standstill and drives off again in the opposite direction. Activate the cruise control with a simple movement to the right. Driving with Fendt Vario: ingeniously simple – simply ingenious
SEEDER
4
1 3
2
F1
C
P1
F2
Record
Edit
P2 F3 F4
max
P3
F5 ESC
Ergonomic benefits: Located directly next to the speed control lever are the crossgate lever for operating two hydraulic valves, the engine speed memory keys, the sliding control and the key for setting and activating the TMS (optional).
Variotronic TI A touch of a button on the joystick triggers automatic procedures at the headland. They save time and prevent operating errors on long work days. Sixteen sequences with up to 13 functions each can be saved permanently for four implements.
Fendt has received many international awards for the Variotronic operating concept. Comprising a joystick, Varioterminal and control console, the Variotronic impresses through its simple, ingenious handling. For you, this means greater economic benefits and productivity in practical use.
Simple, intelligent operation In the basic version, the 400 Vario already comes with several automatic modes that do the work for you. For example, automatic PTO engagement, which automatically engages and disengages the PTO dependent on the height of the power lift. And also 4WD and differential lock engagement, which is speed and steering angle dependent and simplifies your work every time you are at the headlands.
8
• Convenient operation with the Fendt multi-function joystick • Cruise control functions • Stepless reversing (shuttle gears) with stop-and-go function • Convenient engagement controls with automatic modes for 4WD, differential locks and PTO • Engine speed memory • ISOBUS implement control (optional) • Variotronic TI headland management system (optional)
ISOBUS implement control With the optional Fendt implement control, you profit from lower purchase costs and enhanced operating comfort. Without implement control, a separate control terminal is required for each implement. With implement control on the 400 Vario, you can control all ISO and LBS implements conveniently with the Varioterminal and the joystick. This enables uniform and simple operating logic with optimum operating ergonomics. 9
Variotronic TI headland management system The 400 Vario is available with the optional TMS Tractor Management System and Variotronic TI Headland Management System These allow you to carry out your work easier and more comfortably. Whether you are a beginner or professional, with these systems, you can automatically perform your work at maximum efficiency and have more time to monitor your implements.
So powerful and yet so economical thanks to the latest engine technology A 657 Nm torque, 125 HP max. power at 1,800 rpm and a specific fuel consumption of 204 g/kW for the 415 Vario thanks to implementation of the latest technology. Nm
650 625 600 575 550 525 500 475 450 425
kW
115 110 105 100 95 90 85 80 75 70 65
415 414 413 412 411
415 414 413 412 411
g/kWh
66,3 63,6 61,2 58,6 56,1 53,5 51,0 48,5 46,0 43,4
The external EGR system provides targeted cooling of recirculated exhaust, which lowers fuel consumption considerably compared to internal recirculation systems.
inside
155 148,5 147 135 129 122,4 115,6 109 102 95,2 88,4
162 154 147
220 210 200
rpm 1000 1200 1400 1600 1800 2000 2100
A fuel consumption indicator is integrated in the Varioterminal on the 400 Vario. This shows the current as well as average fuel consumption and has two sum counters. Fuel consumption per hectare can also be logged at the same time in the on-board computer.
On the new generation 400 Varios, the cooling system has been adapted to the increased power. At the same time, accessibility for servicing has been improved significantly. The cooling units for hydraulic oil, transmission oil, fuel and air-conditioning can be swung up away from the radiator to give you better access.
Whether you operate your tractor on the road or in the field, for grassland operations or row crop work, in any case you are dependent on superior overall profitability. Today the main factor here is fuel consumption. The 400 Varios have quiet state-of-the-art engines with long servicing intervals. With a fuel tank capacity of 245 litres, there is no need to refuel on long working days.
Power and economy from 4-cylinders Fendt employs a high-tech four-cylinder Deutz engine with four-valve technology for greater economy. Thanks to the four-cylinder engine, the 400 Vario has an incredibly compact construction, which gives it unprecedented manoeuvrability for this power class. The engine has a speed-independent common rail high-pressure injection system and electronic engine control.
10
• 4-valve engine with 4.04 l displacement: 155 HP max. power at 1900 rpm (ECE R24) and 657 Nm torque (415 Vario) • Common rail high-pressure fuel injection system with injection pressures up to 1,600 bar • Electronic engine control EDC 7 • External exhaust gas recirculation system for lowest fuel consumption and best environmental compatibility • Viscous fan for optimum engine cooling • Low specific fuel consumption of 203 g/kWh • 245-litre tank capacity for long work days • Servicing interval every 500 operating hours • One hundred percent RME operation possible thanks to two oil lubricated highpressure injection pumps
AGRex – economical and environmentallyfriendly The high-tech injection system and the firstrate external exhaust gas recirculation system complement each other. Cooling and metering of recirculated exhaust optimises the combustion process substantially and fuel consumption is reduced significantly compared to simple internal exhaust gas recirculation systems.
11
Fully approved for RME fuel The 400 Vario is also approved for RME fuel without restrictions, as are all Fendt tractors starting with the 1995 models. The use of rape methyl ester according to DIN EN 14214 is fully approved by Fendt as standard specification. You profit from the cost benefits – the tractor does not need to be converted, nor is costly additional insurance required.
Experience the Vario advantages – on the road, in the field and at the filling station Operation
Operating time Fuel consumption
Mowing Chopping silage maize Harvesting potatoes Harrowing/drilling Weeding Ripping Ploughing
-10% -10% -5% -5% -5% -3% -3%
-10% -10% -10% -10% -10% -3% -3%
50.0 km/h
40.0 km/h 35.0 km/h
The savings potential for various working procedures is clearly noticeable. You save valuable working time through higher area coverage and also profit from low fuel consumption. Source: Nürtigen University
α= 30ϒ 1
Fendt Vario – better than any power shift transmission. It allows you to utilise power reserves that are not even available to modern power shift transmissions.
6
2
α= 45ϒ
5 4
3
8
β= 45ϒ
7
750 540 1000
9
I
II
engine torque hydraulic power transfer mechanical power transfer PTO drive 4WD
10
1. Torsional vibration damper 2. Planetary gear set 3. Ring gear 4. Sun wheel 5. Planet carrier 6. Hydro pump 7. Hydro motor 8. Collecting shaft
10
km/h
km/h
10
km/h
10
km/h
10
km/h
Engine speed Fuel consumption
Automatically drive economically with the optional TMS Tractor Management System When TMS (Tractor Management System) is activated, the tractor electronics control the engine and transmission. This significantly increases operating comfort for the driver. The driver only needs to set the desired speed, TMS controls the rest. In the above graphic, one can see that the tractor drives at a reduced engine speed on level ground. On the slope, the load increases, so TMS increases the engine speed. As soon as the load decreases (on level ground or downhill), the quantity of fuel injected is reduced. This maintains an economical driving style, since TMS drives the tractor at the lowest engine speed possible.
The productivity of a tractor, and therefore also the return on investment, is determined in great part by fuel consumption. This requires an economical engine. To keep it working at its economical optimum, while achieving the greatest area coverage possible, is the transmission’s job. No problem for the Vario drive from Fendt.
Uncompromising in all applications This kind of flexibility is only possible with Fendt Vario transmissions. From 30 metres per hour to 50 km/h, every speed is possible over the whole range, without steps. The 400 Vario is therefore predestined for operations in mixed farms. The stepless drive on the manoeuvrable 400 Vario and its powerful PTO drive are very useful, especially for grassland work and row crop operations.
12
• Maximum working capacity with optimum fuel consumption • Up to 10 percent more area coverage thanks to optimally adapted travel speed • 50 km/h top speed at a fuel-saving 1700 rpm • Up to 10 percent in fuel savings • Super crawler gears included (from 30 m/h) • Joystick operation instead of multiple levers • Turboclutch feature for greater driving comfort • Stepless reversing of travel direction (shuttle gears) without wear • Stop-and-go function • Optionally available with the Tractor Management System TMS for even greater ease of operation
Fendt Vario: better than power shift With stepless variable speed, you can utilise power reserves that are not even available to modern power shift transmissions. With conventional transmissions you are always one gear too high or too low, because of the steps. Vario allows you to mobilise the power reserves that are hidden in between the steps. That means power flow without interruptions.
13
Special equipment included In addition to economic benefits, the stepless drive also offers you a one-of-a-kind benefit in operating comfort. A crawler gearbox is no longer necessary, since it is integrated in the Vario drive. To increase driving comfort, the 400 Vario has a turboclutch feature, which prevents engine stalling.
Overview of technology
The second generation Fendt 400 Varios are a new development of the perfect all-round tractor for mixed and grassland farms. With five models in the power output range from 115 hp to 155 hp maximum power, the 400 Vario impresses through exceptional manoeuvrability for a broad range of applications.
1. Front drive axle with 52° steering lock 2. Hydropneumatic front axle suspension with level control (lockable) 3. Front power lift (optional) 4. Front PTO (optional) 5. Planetary final drives 6. 4.04-litre Deutz engine with 4-valve technology 7. Intercooler 8. AGRex external exhaust gas recirculation in 9. Stepless Vario transmission 10. Planetary gear set 11. Hydro motor 12. Hydro pump 13. Enclosed 4-WD clutch 14. Nitrogen pressure accumulator (suspension) 15. 245-l fuel tank 16. Planetary axle 17. Multi-disc brake for rear wheels 18. Removable toolbox 19. Tiltable comfort cab
20. Front cab bearing is silent bearing 21. Mechanical cab suspension (optional pneumatic cab suspension) 22. Air-sprung Fendt comfort seat 23. Multi-function joystick for controlling the stepless Vario transmission 24. Varioterminal 25. Auxiliary work lights
side
7
3
2
1 4
14
25
24 23 22 19
21 8 20
10
9
6 18
15
11 12 13
14
5
15
17
16
Fast haulage at 50 km/h with maximum comfort and full safety A combination of suspension systems The combination of shock load stabilising (1), mechanical cab suspension (2) and front axle suspension with level control (3) provides ride comfort on par with commercial vehicles. It also increases safety substantially, since the vehicle is not in danger of developing bounce when driving with mounted implements. The load on the front axle remains constant and steerability is maintained.
2 1
3
Optional pneumatic cab suspension The pneumatic cab suspension has air spring dampers on the rear bearing. These feature automatic levelling, which adjusts the suspension to varying loads.
The mechanical cab suspension The hydraulic suspension at the front, along with sprung struts at the rear, controls the movement of the cab in fore-to-aft direction. The integral lateral stabiliser and the absence of unwanted bounce greatly enhance ride comfort in the cab.
Front axle suspension The swing axle, centrally located in the swing arm, detects uneven surfaces and transmits these findings to the swing arm. The plungers on the two cylinders displace oil, activating three nitrogen reservoirs which absorb all shocks.
Even for compact standard tractors, the transportation of goods for purchase and sales jobs is gaining importance and today already amounts to over 40 percent of operating hours. The 400 Vario allows you to perform haulage work at 50 km/h at a fuel-saving 1700 rpm while providing maximum ride comfort and driving safety. Three systems work together to provide this comfort.
Highest level of comfort The combination of front axle suspension with level control, shock load stabilising and mechanical or optional pneumatic cab suspension provides you with exceptional ride comfort, even with heavy mounted implements. At the same time, these systems also increase your safety. Smoother driving behaviour guarantees safer braking and steering of the vehicle at all times.
16
• 50 km/h haulage speed at reduced engine speed (1700 rpm) • EPC with shock load stabilising • Superior driving safety and ride comfort • Mechanical cab suspension (standard), optional pneumatic cab suspension for perfect ride comfort • Front axle suspension with level control and locking function that permits front-mounted implements to be guided precisely • Top-efficiency lifetime braking system: Wet, integral multi-disc brakes • Robust cast half-frame design
Driving safety in all situations A practically maintenance-free four-wheel braking system comprising two integrated multi-disc brakes for the rear wheels and 4WD engagement for the front wheels, ensures safe braking. The front axle with level control, a benefit in terms of ride comfort, also contributes to driving safety. The suspension can be locked with the push of a button, so that frontmounted implements can be guided precisely.
17
Cab suspension for maximum comfort The 400 Vario cab is equipped with mechanical cab suspension as standard. Conical bearings in the front and sprung struts with an integral lateral stabiliser at the rear, absorb annoying shock loads and movements of the cab. The optional pneumatic cab suspension provides an even greater suspension effect. It moves working comfort up another notch, so that the driver remains fit on long work days and the driver’s health is protected in the long run.
Tyre options for all requirements – with full manoeuvrability Superior manoeuvrability thanks to a short wheelbase A short wheelbase of 2417 mm and a turning circle of 4.95 or resp. 4.75, make the 400 Vario a compact, manoeuvrable powerhouse.
For even greater manoeuvrability, the 400 Vario can be fitted with optional swivelling mudguards for the front wheels (standard on 415), which allow the wheels to be turned to the fullest.
The 400 Vario accepts row crop tyres 270/95 R32 front and 270/95 R48 rear, giving you a ground clearance of 500 mm (for 414 - 415 also 530 mm with 270/95 R361) front and 320/90 R501) rear). This permits you to carry out plant protection measures and fertilising in late growth stages.
Minimum soil compaction is essential for successful field and grassland operations. The tyre options for the 400 Vario go up to 480/60 R28 front and 650/60 R38 rear (for 414 - 415 Vario also 540/65 R26 front and 650/65 R38 rear). That guarantees the least amount of pressure on the ground.
Intelligent 4WD and differential lock technology Depending on the setting, 4WD and differential locks can be automatically engaged and disengaged, dependent on steering angle and travel speed. If you choose 100% 4WD or 100% differential locking, these are engaged permanently. Both of these functions can be engaged and disengaged under load in automatic as well as 100 percent modes.
No matter if you operate your tractor for cultivation or grassland operations – in either case soil compaction is a major disadvantage. With the appropriate tyres, you can prevent soil compaction. With the 400 Vario, you profit from an advantageous vehicle weight and a broad selection of tyre options. If required for the application, variable ballasting options are also available.
Universal applicability The 400 Vario has a power-to-weight ratio of 35 kg/hp (415 Vario), which gives it exceptionally lively handling. With a permissible gross weight of 9000 kg or resp. 9500 kg (414 - 415 Vario), you have adequate payload reserves for your implements. A clever ballasting concept using rim weights on the rear axle and frontmounted weights, is available for draft work or for front loader operations.
18
• Compact dimensions for maximum manoeuvrability and best overview • Wheelbase: 2.42 metres • Turning circle: 4.95 meters (414 Vario and 415 Vario 4.75 meters) • Large row crop tyres can be used: 320/90 R50 rear1) 270/95 R36 front1) (414 Vario and 415 Vario) • Optimally suited for row crop and specialty crop work thanks to stepless drive which starts at 30 m/h • Electrohydraulic engagement for 4WD and differential lock, can be actuated under load • 100% locking differential on rear axle • Locomatic front differential lock
Short, compact and manoeuvrable Based on four-cylinder engines, the 400 Vario has a compact design that offers you maximum manoeuvrability and best visibility. This manoeuvrability is not only a benefit in tight farmyards – it also helps in grassland operations, since it saves precious time at the headlands.
Tyres for every application The new 400 Vario has many tyre options. For row crop work, a combination of 270/95 R36 1) front and 320/90 R50 1) rear is possible. That amounts to a wheel diameter of 1847 mm on the rear axle. For the best protection against soil compaction, a combination of 480/60 R28 front and 650/60 R38 rear is possible. Together with the low unladen weight of a 4-cylinder tractor, these are optimum conditions for minimum soil compaction. 1)
19
Third-party accessory, only 414 - 415
Powerful drives at the front and rear
Standard with three-speed PTO The 400 Vario is fitted with a three-speed PTO as standard. Depending on the implement, you can switch between 540 rpm, 540E (750 rpm) and 1000 rpm with the buttons in the cab. A flange PTO with 540 rpm and 1000 rpm is available as an option for the 400 Vario instead of the three-speed PTO.
Optional front PTO with excellent efficiency Optionally with 540 rpm or 1000 rpm. In either case, you benefit from excellent efficiency, since the front PTO is driven directly from the engine’s crankshaft.
Save yourself unnecessary steps The 400 Vario has external controls for the power lift and rear PTO. Mount rear implements easily and save yourself unnecessary steps, for example, when filling the slurry tank.
Never endanger the drive shaft again Concentrate on the essentials at the headlands. The PTO automatic mode engages and disengages the PTO as soon as the implement has been lowered or raised.
You will appreciate the operating comfort of the 400 Vario, in particular for tillage applications, where you often must operate the PTO controls in addition to the power lift controls. It offers you extensive, highquality PTO management with start-up control.
Three-speed PTO is standard The PTO engagement control has 3-speed preselection. It is conveniently operated with keys on the control console. The 400 Vario comes with the PTO speeds 540 rpm, 750 rpm und 1000 rpm at the rear as standard. For less power-hungry operations, the 750-rpm economy PTO “540E” allows smooth working at a reduced engine speed and also saves fuel. The optional front PTO is driven directly from the engine’s crankshaft with no loss of power. 20
• Three-speed PTO with comfort controls (540/540E/1000 rpm) • Optional with flange PTO at rear (540/1000 rpm) • PTO actuation with start-up control • PTO automatic mode (automatic engagement dependent on height of the power lift) • External PTO actuation at the rear • External PTO-engine speed control (in combination with TMS)
You have the choice of 540 rpm or 1000 rpm. The automatic PTO start-up sensitively controls start-up, according to the power requirements of the implement. This increases the service life of all the PTO components and reduces machine costs.
21
Automatic modes The well-known and greatly-appreciated PTO automatic mode is also available as standard on the 400 Vario. It automatically engages and disengages the PTO, depending on the height of the power lift. The 400 Vario offers you operating comfort inside and outside of the cab. The electrohydraulic PTO engagement can be operated externally from the tail lamp bracket.
Powerful hydraulics for modern implements Electrical valves: first-rate working and operating comfort flow rate raise
lock flow rate lower
time function settings
activate priority
activate time function
activate external valve actuation
The joystick and the crossgate lever control the electric proportional valves. These are all double-acting control units, which can also be used in a single-acting capacity, and feature a floating position. The controls for the first two valves are located on the convenient crossgate lever. Setting the valve functions with the Varioterminal is simple. Using the rotary control and function keys, you can easily and precisely control the flow rates and actuation times of all electric proportional valves, set valve priority or activate external actuation for a valve.
Optional: first-rate front power lift The optional front power lift on the 400 Vario is an integral part of the tractor design and has been well-thought out in every last detail. For example, the top link can remain on the tractor as it is, even when it is not required.
Optional: external controls for one hydraulic control unit An external control for one hydraulic control valve is available for the 400 Vario as an option. This facilitates mounting implements using a hydraulic top link, for example.
Modern implements demand ever greater flexibility and performance from the tractor hydraulics. Fast lifting and high oil delivery rates are required for economical operation. The 400 Vario models, with their load sensing hydraulics and electrical hydraulic valves, are well-equipped for convenient operation.
Powerful hydraulics The 400 Vario is equipped with a load sensing hydraulic system. That means : modern axial piston pumps deliver the exact quantity of hydraulic oil required – up to 75 (110 optional) litres per minute. A maximum of 38 litres of hydraulic oil is available to mounted or trailed implements. The hydraulics and transmission have separate oil supplies, which permit unrestricted use of bio-oils for the hydraulics.
22
• Load sensing hydraulics • Hydraulic delivery capacity: 75 l/min (optional 110 l/min) • Hydraulic oil cooler • Maximum lift capacities: Rear: 7450 daN Front: 3100 daN (optional) • EPC rear power lift control with - shock load stabilising - quick lift - lift height limiter - lowering throttle - position, draft and mixed control - external actuation • Integral front power lift (optional), with gas shock absorbers • Electric hydraulic valves (optional with external actuation) • Crossgate lever • Max. available hydraulic oil: 38 l • Separate oil supplies for transmission and hydraulics • Bio-oils can be used for hydraulics
EPC rear power lift with reserves The electrohydraulic rear power lift, which has a maximum lift capacity of 7450 daN, guarantees that even heavy rear-mounted implements for this power class can be lifted to the fullest lift height without trouble. The standard-equipped shock load stabilising counteracts vehicle bounce by actively raising and lowering the power lift.
23
Integral front power lift with damping The optionally available front power lift for the 400 Vario has a maximum lift capacity of 3100 daN. It can safely lift front-mounted implements weighing up to 2.1 tonnes. The integral gas shock absorbers ensure that driving safety and ride comfort are maintained at these high loads.
Turn your Vario into a stepless loader with the new Fendt CARGO
With the new Fendt CARGO Lock, you can mount and remove the CARGO front loader from your 400 Vario even faster and easier. Thanks to the semi-automatic lock, you no longer need to deal with inserting locking bolts, which is often difficult. The system also offers optimum operational safety, since the front loader is locked in place immediately after driving into it. Fendt CARGO Lock is selfadjusting and is therefore particularly service-friendly.
D
CA
RG
O
C
B
CA RG
O
415
E A
The standard-equipped crossgate lever is a plus in operating comfort. Two control valves on the front loader can be operated precisely with just one lever. The optional CARGO comfort controls not only provide controls for a 3rd and 4th hydraulic circuit, but also convenient activation of the hydraulic attachment lock and the front loader damping system using the crossgate lever.
Model
4X/75
4X/80
A B C C D E
180 4125 1750 1210 55° 48° 1940 2250
180 4125 1750 1210 55° 48° 2260 2620
Digging depth (mm) Lifting height (mm) Dumping distance (mm) B = 3.5 m Dumping distance (mm) B = max. Angle of emptying Angle of backwards tilt Lift capacity (daN) Max. lift capacity (daN)
A 400 Vario equipped with an original CARGO front loader from Fendt permits extremely comfortable front loader operations.
As for tractors, the demands on the performance of modern front loaders continue to increase. The answer here is Fendt CARGO. The tailor-made front loader, sporting a new design, was developed specifically for Vario tractors. During development, attention was not only placed on technical specifications. Comfort, safety and service-friendliness also meet the high Fendt standards.
The tailor-made accessory for your 400 Vario If you upgrade your 400 Vario with FENDT CARGO, you will profit from a perfect combination of all components. During development, all the dimensions and forces of the CARGO were explicitly designed for the Vario. This gives you the operational safety that comes from testing the front loader and tractor as one complete unit. The results are best visibility with balanced force and load distribution for practical operations. 24
• Continuous lift capacity: 1940 daN (4X/75: 412 - 413) 2260 daN (4X/80: 414 - 415) • Lifting height: 4,125 mm • All pipes run in the frame • Valves and damping are protected in cross bar • Simple retrofit options for the loader • Euro quick-change frame (optional SMS frame) • Comprehensive safety concept • Multi-coupler for mounting front loader (standard) • 3rd and 4th hydraulic circuit (optional) • Multi-coupler for 3rd and 4th hydraulic circuit on Euro quick-change frame (optional) • Damping system (optional) • Hydraulic attachment lock (optional) • Wide range of original Fendt attachments (optional)
Comfort with a capital C The operating concept was designed for optimum driving comfort. The standard crossgate lever provides precise control of the CARGO. The optional third or fourth hydraulic circuits, are activated via pushbuttons on the crossgate lever and then easily operated with the crossgate lever. The optional damping system can be activated conveniently from the driver seat by simply operating a switch; the optional attachment lock is also controlled in the same way. 25
Through a specially designed connection between the front loader and the tractor, all maintenance work can be performed on the 400 Vario tractors while the front loader is attached. Further visible evidence of the perfect symbiosis of tractor and loader is the front window of the 400 Vario, which can be swung out completely at any time during front loader work.
Often small things are what make everyday life with a Fendt so pleasant The 400 Vario is equipped with rear work lights as standard. The Twin Power work lights are mounted on the left and right of the cab roof. Their high position gives you exceptional lighting for your rearmounted implements.
With two simple hand movements, you can set the lower links on the 400 Vario to rigid or swinging position, depending on implement requirements. A robust, sturdy mechanical lateral lock is locked and unlocked with levers on the right and left sides. In the unlocked position, the lift arms are automatically centred in the middle position. By moving just one pin, you can change the width of the lower links between Cat. II and III.
The standard automatic hitch with remote control from Fendt can be adjusted in height quickly and easily. The locking pin is opened with a lever. The hitch can then be lowered or raised on the guide rails – with only one hand.
It is impossible to prevent oil from leaking when coupling hydraulic connections. On the 400 Vario, though, oil leaks run into the casing, which also serves to protect hydraulic couplings from dirt, and are then led through a hose into an easily accessible container.
You have surely experienced this in your day to day work. Whether you have to change implements when you are pressed for time, or have to work many hours in your Vario without breaks during peak work time, often the small detail solutions are what make life easier. Fendt offers you a number of such details.
Benefit from the sum of the small details that a Fendt tractor offers to help you perform your work easier and more comfortably. When designing and developing a vehicle, Fendt engineers always search for solutions that bring you forward. From experts for experts.
26
The 400 Vario was designed to offer you a large selection of tyres. Wide tyres for soil protection are possible, as are row crop tyres with large outer wheel diameters.
Whether you have control cables for a control terminal or hydraulic lines for hydraulic valves on the implement, the cable lead-through in the Fendt cab is designed to enclose the cable while the window is closed, so that dirt and cold cannot enter the cab. Of course, the cables can be fitted easily without tools.
The 400 Vario is equipped with a removable toolbox as standard. Fast and simple to access on the left side of the tractor, so that you can, for example change the shear bolts, without walking all the way around the tractor. A toolbox with a lock is mounted on the tank and can easily be removed completely.
Fendt tractors have signal lights with auto shut-off. Just like in your car, the turn signal indicator automatically shuts off when the steering wheel is turned back.
The 400 Vario was designed to give you access to all areas necessary for daily maintenance – even when the front loader is mounted.
The steering wheel is height and tilt-adjustable to adapt to the individual requirements of every driver.
27
Innovative technology, intelligent services – all from one source Consultation: the way to a tailor-made Fendt Fendt sales agents are experienced specialists who can provide you with extensive advice and information on technology, equipment and the overall profitability of a Fendt tractor.
More freedom for investments – financing through AGCO FINANCE Financing through AGCO FINANCE guarantees attractive conditions and flexible repayment periods, customised to meet your needs.
A trial run in the field – experience the difference You cannot pass judgement on a Fendt tractor without the experience of driving one in the field. Fendt tractors enjoy a first-class reputation for superb driving and working comfort. Not until you have driven a Fendt, do you realise how big the difference really is when compared with other tractors.
Renting gives you freedom Do you need a vehicle to fill a short-term capacity requirement, or do you want use one over a longer period of time without purchasing? Are you looking for a tax advantage or do you require solvency for other investments? Fendt StarService offers you solutions.
It is clear that you get cutting-edge technology with a Fendt tractor. But that is not enough for a successful business nowadays. That is why Fendt sales partners also offer a wide range of services. All from one source.
Competent customer consultations and demonstrations Fendt dealers and distributors receive regular training and are specialists for Fendt products. They have in-depth knowledge of the entire product line and will offer you competent consultation. Ask your local Fendt sales partner. Or contact us at www.fendt.com for an individual Fendt demonstration. 28
Know-how through practical training Profit by technically and economically optimising operations with your Fendt tractor, whether in the field, on the road or in the books. Professional instructors show you how to utilise top class technology efficiently and safely, in theory and practice.
Fast diagnostics thanks to FENDIAS The StarService technician uses FENDIAS to gain access to the digital data inside your Fendt. Furthermore, if required, data is gathered and analysed while the machine is running – for example, data from the hydraulics or the transmission. All for the sake of fast error diagnostics and operational availability.
FENDT StarService Emergency Hotline Available 7 days a week!1) FENDT StarService partners are mobile and have only one objective: to keep your Fendt operationally available. Should something actually happen, the Emergency Hotline is available for fast and competent help – even on-location at your farm or business!
Genuine Fendt parts – from AGCO Parts – so that your Fendt remains 100% Fendt: Original Fendt parts are tailored to your Fendt. They carry the assurance of series quality and are tested for functional reliability. That pays off in many ways: - 12 month warranty on original Fendt parts and their installation - the highest level of operational reliability - top resale value
Mobile expert service Every StarService partner has a modern service vehicle. Tried and test, optimised tools, as well as service documentation and FENDIAS, the computer-supported analysis and diagnostics system, are always on board. This allows the mobile StarService technician to localise and rectify errors quickly.
Fendt24 – because your time is invaluable! Your StarService partner has the most commonly required parts in stock. If a part is not in stock, we deliver those that are ordered by 6 pm by 8 am the next morning. During the harvesting season1) your StarService partner has access to Fendt24. Here orders are taken around the clock and are ready for delivery within two hours.
Profitability under contract With a Fendt Service Package, you have servicing and repair costs under control. Would you like to have the prescribed servicing work done on the basis of reasonable fixed costs? Or do you want full control of costs per operating hour without unpleasant surprises? Choose between the Service, ProService and FullService packages. 29
1)
during the harvesting season from May to October
Tractors for rent Rent a tractor including the Service Package at a fixed cost through your Fendt StarService partner. This frees up your funds and you can easily calculate the costs per hour. We can take over all servicing work, complete insurance coverage and repairs*, if you like. * Repairs according to Fendt warranty policy; natural wear (e. g. tyres) and malicious damage are excluded.
Technical specifications
411 Vario
Wheelbase Overall length
Overall height
Overall width
Engine Rated power (kW/hp) (ECE R24) Max. power (kW/hp) (ECE R24) Rated power (kW/hp) (EC 97/68) 6) Max. power (kW/hp) (EC 97/68) No. of cylinders / cooling / aspiration Injection / engine control / exhaust recirculation Bore / stroke (mm) / displacement (cm3) Rated engine speed (rpm) Speed at max. power (rpm) Max. torque (Nm/rpm) Torque rise (%) Optim. fuel consumption (g/kWh) Fuel tank (l) Oil change interval (op. hrs.)5)
74 / 100 85 / 115 84 / 114 88 / 120
2100 1900 505/1400 42 205 245 500
Transmission and PTO Type of gearbox Speed range: Range I (forward / reverse) Range II (forward / reverse) Max. speed (km/h) Rear PTO (rpm) standard: Front PTO1)
412 Vario
50
stepless Vario transmission 0.02 to 24 km/h / 0.02 to 17 km/h 0.02 to 50 km/h / 0.02 to 40 km/h 50 540 / 540E / 1000 540 or 1000
7450 3100 38
5400 9000 (7500 1)) 3600 (2100 2)) 2000 4252 2340 2900 462 2417 1820 1800 4.95
5400 9000 (7500 1)) 3600 (2100 2)) 2000 4252 2340 2900 462 2417 1820 1800 4.95
Electrical equipment Starter (kW) Battery Alternator
2100 1900 657/1400 35 204 245 500
50
75 (110 1)) 200 7450 3100 38
5420 9000 (7500 1)) 3580 (2080 2)) 2000 4242 2380 2923 482 2417 1820 1800 4.95
5450 9500 (7500 1)) 4050 (2050 2)) 2000 4281 2440 2923 482 2417 1880 1860 4.75
5450 9500 (7500 1)) 4050 (2050 2)) 2000 4281 2490 2953 512 2417 1880 1860 4.75
3.1 12V / 90Ah 2100 W / 14V / 150 A
Cab Construction Climate control
integral, tiltable safety cell hinged, tinted front, side and rear windows, roof hatch, ventilation system with blower in roof, hot water heating with 3-speed blower, air-conditioning1)
= optional 2) = with perm. gross weight of 7500 kg, 3) = depending on tyres, 4) = can also be operated as single-acting, 5) = is halved when using RME, 6) = definitive specifications for registration 7) = without steering brake
411 Vario
Optional
50
103 / 140 114 / 155 113 / 154 118 / 160
wet, integrated multi-disc brake 4WD engagement
Weights and dimensions Unladen weight acc. to DIN 70020 (kg) Perm. gross weight (kg) Max. payload (kg) Max. hitch load (kg) Overall length (mm) Overall width (mm) Overall height (mm) Ground clearance 3) (mm) Wheelbase (mm) Front track 3) (mm) Rear track 3) (mm) Min. turning circle (m) 7)
Standard tyres
415 Vario
load sensing 75 (110 1)) 75 (110 1)) 75 (110 1)) 200 200 200 EPC, lower link control, shock load stabilising 4) 4) 4 da (2 da ) electr. valves / crossgate lever 7450 7450 7450 3100 3100 3100 38 38 38
75 (110 1)) 200
Brakes Rear brakes: Front brakes:
1)
414 Vario
81 / 110 88 / 120 96 / 130 92 / 125 99 / 135 107 / 145 91 / 124 98 / 134 106 / 144 96 / 130 103 / 140 110 / 150 4 cylinders, four-valve technology / water / turbocharger, intercooler common rail / EDC / AGRex 101/126/4038 2100 2100 2100 1900 1900 1900 550/1400 589/1400 613/1400 42 41 35 205 204 203 245 245 245 500 500 500
50
Hydraulics Type Hydraulic pump capacity (l/min) Working pressure (bar) Rear power lift control Auxiliary valves max. (standard) incl. front controls Max. lift capacity, rear power lift on the drawbar (daN) Max. lift capacity, front power lift (daN) Max. available hydraulic oil (l)
413 Vario
412 Vario
413 Vario
414 Vario
415 Vario
front 480/65 R24
rear 540/65 R38
front 480/65 R24
rear 540/65 R38
front 540/65 R24
rear 600/65 R38
front 540/65 R24
rear 600/65 R38
front 540/65 R26
rear 650/65 R38
270/95 R32 540/65 R24 480/60 R28
270/95 R48 600/65 R38 650/60 R38
270/95 R32 540/65 R24 480/60 R28
270/95 R48 600/65 R38 650/60 R38
270/95 R32 480/70 R24 480/60 R28
270/95 R48 520/70 R38 650/60 R38
320/85 R32 480/70 R24 480/60 R28
300/95 R46 520/70 R38 650/60 R38
320/85 R32 480/70 R24 480/60 R28
300/95 R46 520/70 R38 650/60 R38
Your Fendt dealer will be pleased to inform you about further tyre options.
30
Standard and optional equipment
Vario controls Joystick control (multi-function joystick) Varioterminal for fine settings Camera for the Varioterminal Variotronic Implement control for ISO and LBS implements Variotronic TI - Headland Management System Vario TMS - Engine-Transmission Management System
411 412 413 311 414 312 415 312 ■ ■ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑
Cab Mechanical cab suspension Pneumatic cab suspension Height and tilt-adjustable steering column Fendt Comfort Seat, air sprung Fendt Super Comfort Seat, air sprung, low frequency suspension Radio mounting kit with two stereo speakers Radio CD Blaupunkt or CD MP3 Blaupunkt Ventilation with steplessly adj. fan in roof Air-conditioning system Emissions filter (aerosol) Rear window wash/wipe Twin Power roof work lights rear, front Work lights A-pillar, rear mudguard Work light Xenon A-pillar, mudguard rear Terminal bracket
■ ❑ ■ ■ ❑ ■ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑
■ ❑ ■ ■ ❑ ■ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑
■ ❑ ■ ■ ❑ ■ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑
■ ❑ ■ ■ ❑ ■ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑
■ ❑ ■ ■ ❑ ■ ❑ ■ ❑ ❑ ❑ ■ ❑ ❑ ❑
Engine Air filter precleaner Preheater package (engine, transmission, hydraulic oil) Exhaust brake
❑ ❑ ❑
❑ ❑ ❑
❑ ❑ ❑
❑ ❑ ❑
❑ ❑ ❑
Transmission Turboclutch, automatic maximum output control, cruise control Shuttle function, stop and go function Acoustic signal when reversing
■ ■ ❑
■ ■ ❑
■ ■ ❑
■ ■ ❑
■ ■ ❑
Chassis / safety features EPC-C with shock load stabilising Front axle suspension with level control Compressed air system
■ ■ ❑
■ ■ ❑
■ ■ ❑
■ ■ ❑
■ ■ ❑
4WD / differential locks Central 4WD, maintenance-free Comfort engagement controls for 4WD / differential locks Rear / front differential with 100% disc locking
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
Power shift PTO Rear: 540/540E/1000 rpm Rear: Flange PTO 540/1000 rpm Front: 540 rpm or 1000 rpm PTO engagement control, electrohydr. preselection External controls for rear PTO
■ ❑ ❑ ■ ■
■ ❑ ❑ ■ ■
■ ❑ ❑ ■ ■
■ ❑ ❑ ■ ■
■ ❑ ❑ ■ ■
Hydraulics Axial piston pump, hydraulic oil cooler Electrohydraulic power lift (EPC-C), with external controls Upper link QC hydraulic Radar-activated wheel slip control External hydraulic connection (load sensing) External control for hydraulic control unit at rear Double connect-under-pressure couplings rear Front power lift da with external controls Front power lift da with position control and external controls Front loader, front loader attachments
■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Body Rear hitch Automatic hitch with remote control, rear Ball coupling Pickup hitch Swinging drawbar Piton-fix Rotating beacon Wide vehicle marker Hinged front wheel mudguard Twin tyres rear Wheel weights, rear wheels Front weights, various sizes
■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
■ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ■ ❑ ❑ ❑
■ = standard ❑ = optional - = not available
31
CD or CD MP3 Blaupunkt radio
Additional Xenon work lights; rotating beacon
Double-sided connect-under-pressure couplings; External control for hydraulic control unit at rear external hydraulic connection (load sensing) Variotronic Implement Control for ISO and LBS implements
Integral front power lift and front PTO
Wide selection of weights for optimum ballasting
Roof window for frontloader operations
The Fendt on-line configurator: Put together your own custom Fendt according to your wishes. Visit www.fendt.com.
Leaders drive Fendt
Sales agent:
All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information available at the time of going to press. Changes may be made before the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information.
AGCO GmbH Fendt Marketing D-87616 Marktoberdorf Fax +49 (0) 8342 / 77-220 www.fendt.com 400V/5.0-GB/03-10/6.7-E
