INNOVATIVE WORKHOLDING 2 - Lang Technovation

2013

INNOVATIVE WORKHOLDING

Mission Statement

Our mission at Lang is to provide innovative and high quality workholding solutions to assist our customers in increasing their efficiency, productivity and profitability. We are committed to continuous improvement, new technologies and most of all customer service and support.

2

We are proud to serve the following industries:

Automotive/Racing

Aviation

Medical

... as well as pneumatic/hydraulic components, mechanical engineering, agriculture, food industry, environmental engineering and many more. Defense 3

NEW

!

Once again there are many new features in the catalog. Find out more about some of the highlights below!

Makro•Grip® Precision Vises – Vario & Avanti New to our Makro•Grip® family are our precision vises with the established Vario•Tec positioning system and the brand new, patented quick-changeover jaw system Avanti.

Avanti Item # 42140

Makro•Grip®

Quick-Lock fast actuation system The Quick-Lock fast actuation system is compatible with all square and rectangular Quick•Point® systems. It provides even easier handling along with fast and secure clamping for your fixtures and workpieces.

Makro•Grip®

Picture symbols You will find picture symbols on the specific product pages to make it more user friendly and to highlight the technical specifications and the compatibility of our products. Ø 16 mm

52

4

5-Axis-Vise Item # 47120

52

Ø 16 mm

46

max. 70 N

46

max. 100 Nm

± 0.02 mm

ma

Index

Grip•Fix Up to 20 tons of hydraulic pressure generates indentations in the surface of workpieces and guarantees highest holding power in Makro•Grip® vise due to form-closure technology.

Makro•Grip® Ideal for 5-axis machining (best accessibility). Large clamping range due to reversible jaws. Offered in a wide variety such as Dual and Profile Clamping..

Makro•Grip®


Makro•Grip®

Vario Item # 42057

Makro•Grip® Precision Vises Optimized Vario•Tec centering vises and the patented quick-change jaw system Avanti for profile workpieces to machine the 6th side.

Quick•Point® The zero-point clamping system with the lowest height on the market. Its modularity make it unique. Quick•Point® can be retrofitted to almost every machine tool.

5

x i F • p i r G

6

Grip•Fix Stamping Unit page 14

Grip•Fix Accessories page 15

7

Grip•Fix Grip•Fix: Our patented „form-closure technology“ guarantees maximum holding power – world-wide! 8

9

What makes LANG clamping systems the very best in 5-axis machining?

 Best accessibility

Clamping without endstop and the compact structure of the Makro•Grip® centering vise offers the best accessibility for 5-axis machining.

 Exceptional holding power

Our form-closure technology opens endless possibilities in milling, this with very low actuation and compact

clamping devices.

 Reduced vibrations

The low vibration machining makes it possible to have workpiece surfaces with supreme quality and adds

to the longevity of the tools used.

 Tremendous material savings

Minimal clamping depth of only 3mm on the workpieces allows for tremendous material savings.

 High repeatability

The special form-closure allows for repeatability (0.01mm) of workpieces without endstop.

 Considerable savings in set-up time

Due to stamping directly on the saw cut or cinder layer, preparatory steps on the workpieces are reduced

to a minimum, even on high strength materials such as Titanium

 Minimal wear

Form-closure jaws combined with the stamping of the workpieces, together with the low actuation force

reduces the wear on the vise to a minimum. The preserving of the jaws guaranties clamping consistency.

 No deformation

Minimal actuation force prevents deformation of the workpiece during machining. 10

Grip•Fix

THE ORIGINAL – Often copied, but never the same! Highest holding power world-wide due to „form-closure technology“! Clamping of workpiece with formclosure stamping technology

Clamping of workpiece without stamping technology

Clamping problems of other manufacturers:

Advantages of the Grip•Fix technology by LANG:

• • • •

• • •

A safe clamping of high-tensile materials can only be realized with high clamping pressure Large and poorly accessible applications are needed High wearing of jaw teeth and vise guidance ways Clamping with high repeatability is not possible

Conventional clamping by friction: Large and bulky vises are necessary even with the smallest workpieces to achieve extreme clamping power.

11

Pre-stamping of the workpiece with up to 20 tons of pressure allows you to clamp high-tensile materials even with a smaller and compact vise Excellent accessibility allows you to use short tools which results in fewer vibrations and longer life Minimum wear of the vise

Clamping with form-closure technology: Even with a 3mm clamping depth and minimal clamping force a secure grip on large workpieces is no problem with the compact Makro•Grip® centering vise.

Functional principle of Grip•Fix technology – 5 seconds that revolutionize your machining process Materials such as steel, aluminium, copper, brass and even plastic can be stamped

1

Sawing of blank with minimum addition of material to clamping depth

2

Stamping achieved in 3-5 seconds

12

Grip•Fix

3

Control marks between indents should be slightly visible

4

Clamping of blank in Makro•Grip® vise for safe form-closure clamping on 0.12“ (3mm) only.

13

Grip•Fix Stamping Unit

Stamping Unit – Ideal for a cost-effective start in stamping technology Ergonomic adjustment of stamping pressure

Easily readable hydraulic pressure

Pneumatic hydraulic power multiplier with visible oil-level display

Stamping jaws for materials up to 35 HRc (or 45 HRc), designed for up to 20 tons of stamping force

Quick jaw adjustment for different sizes of workpieces

Scaled endstop for quick positioning of workpiece

Pneumatic operation by hand or foot for activating stamping procedure Stamping Unit for the work bench, max. clamping range 245 mm or 355 mm Included in delivery: • Stamping vise • Stamping jaws with parallels 3mm • Pneumatic-hydraulic power multiplier (435-5.801 psi) • Pneumatic pedal for operation by hand or foot • Gauging blocks to measure the depth of the holding teeth • Scaled workpiece endstop • Protection shield

Weight in lbs (kg)

Part #

Standard stamping unit, clamping range max. 9.65“ (245mm) with standard stamping jaws

147 (67)

141200

Extended stamping unit, clamping range max. 13.98“ (355mm) with standard stamping jaws

169 (77)

141350

Standard stamping unit, clamping range max. 9.65“ (245mm) with High-End stamping jaws

147 (67)

141201

Extended stamping unit, clamping range max. 13.98“ (355mm) with High-End stamping jaws

169 (77)

141351

Description/Type

14

Grip•Fix Accessories

Creating trust: Always the same clamping quality! To ensure consistent holding power in your clamping device, please check the wear of the gripping teeth on a regular basis.

Gauging blocks to measure height of the gripping teeth Part # 141020

An easy and quick way to control the gripping teeth contour and decide if reconditioning is necessary.

Slightly clamp one gauging block with slots on each side of the stamping jaws.

When 3rd gauging block fits between the stamping jaws, send jaws to us for reconditioning.

15

THE ORIGINAL BY LANG! Different hard materials require different stamping jaws to extend the durability and to guarantee safe clamping. With our standard stamping jaws you are able to stamp workpieces up to 35 HRc, while high-tensile materials (up to 45 HRc) require High-End stamping jaws.

High-End

Tensile strength Rm N/mm²

stamping jaws

Standard stamping jaws

Hardness HRc

Standard stamping jaws with parallels 0.12“ (3mm) Weight in lbs (kg)

Part #

3.1 (1.4)

141111

Standard stamping jaws for all materials up to 35 HRc. (Also identifiable by material No. 20 on the back side of the jaws)

High-End stamping jaws with parallels 0.12“ (3mm) Weight in lbs (kg)

Part #

3.1 (1.4)

141112

High-End stamping jaws for all materials up to 45 HRc. (Also identifiable by material No. 15 on the back side of the jaws)

16

Grip•Fix Accessories

Center marking tool enables easy insertion in central position without stopper Center Marking Tool Description/Type

Part #

Center marking tool

141010

Spare marking stud

141010-01

Easy installation for stamping unit

Due to the center marking the workpiece blanks can be inserted centrally in our scaled centering vises. Stoppers are not necessarily needed anymore.

17

p i r G • o Makr

®

p

Gri kro•

Ma

18

®

ise is-V 5-Ax 47120 # Item

Makro•Grip® 5-Axis Vise page 22

Makro•Grip® Profile Clamping Vise page 30

Makro•Grip® Dual Clamping Vise page 34

Makro•Grip® Precision Vise Vario page 38

Makro•Grip® Precision Vise Avanti page 54

Makro•Grip® Accessories page 50

19

Makro•Grip® – Get a grip on workholding! From unfinished parts to finished products – a solution for any clamping challenge

Makro•Grip® Precision Vise Vario: Support and fixturing system for cubical shaped workpieces

Raster measurement: Actual dimensions of the zero-point system

NEW !

Clamping stud size: Diameter of the clamping stud

Makro•Grip®

Vario Item # 42057

Torque: Maximum torque

Clamping force: Clamping force with maximum torque

Centering accuracy: Centering tolerance of the vise

NEW ! 20

Makro•Grip®

Avanti Item # 42140

MADE IN GERMANY

Makro•Grip® 5-Axis Vise: with patented formclosure technology for unfinished parts

Makro•Grip®

Makro•Grip® Dual Clamping Vise: Conversion kit for Makro•Grip® 5-Axis Vise

5-Axis Vise Item # 47120

Makro•Grip®

Makro•Grip® Precision Vise Avanti: Quick jaw change system for profile workpieces

Makro•Grip® Profile Clamping Vise: For all contour and profile workpieces.

Makro•Grip®

21

Profile Clamping Item # 49040

Dual Clamping Item # 47120-TG

Makro•Grip® 5-Axis Vise – Compact and unmatched holding strength for the 5-face-machining of unfinished parts Obtain a larger clamping range by reversing the jaws within minutes

ip®

Makro•Gr

Equipped with double-sided holding teeth contour. Resting height 3 mm

5-Axis-Vise 20 Item # 471

ip®

Makro•Gr

5-Axis-Vise 20 Item # 471

Spindle covers available, see page 41

Centering accuracy ± 0.02 mm Additional clamping location for non-stamped workpieces and semi-finished parts

rip akro•G

M

®

-Vise 5-Axis 120 47 Item #

Threading to attach end stop Double guided jaws

Stable and sturdy base – lightweight and handy

Equipped with clamping studs for precise clamping in Quick•Point® zero-point system

22

Makro•Grip®

The best holding power and least amount of wear on the vise/jaws is achieved by using pre-stamped blanks. (Stamping unit see page 14)

Best accessability for 5-face-machining Highest holding power at lowest clamping force due to

patented form-closure technology High repeat accuracy for inserting workpieces in holding

contour of jaw – no stoppers needed Large clamping range due to reversible jaws Easy and flexible handling due to lightweight vises and

integrated zero-point clamping

We recommend using a torque wrench when working with our clamping vises.

23

NEW !

Makro•Grip® 5-Axis Vise 46

Makro•Grip

52

®

52mm Ø 16

e 5-Axis-Vis 65 Item # 470

52mm Ø 16

52mm Ø 16 46

max. N Ø 16 mm 4670 mm

max. max. 100 70Nm Nm N max. 30 46

max. max. 100 70 Nm NN max. 6000 ± 0.02 mm 46

Makro•Grip® 5-Axis Vise 46 Description/Type Makro•Grip® 5-Axis Vise 46 Base length 3.03“ (77mm)

Clamping range in inch (mm)

Weight in lbs (kg)

Part #

0-2.56 (0-65)

3.74 (1.7)

147065

24

max. 100 70 Nm N ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0

Makro•Grip® 5-Axis 46

25


ip kro•Gr

Ma

52

52mm Ø 16


®

52mm Ø 16

52mm Ø 16 46



max. max. 100 70 Nm N 14000 N ± 0.02 mm 46

Makro•Grip® 5-Axis Vise 77 Description/Type


Weight in lbs (kg)

Part #

Makro•Grip® 5-Axis Vise 77 Base length 4.02“ (102mm)

0-3.35 (0-85)

5.94 (2.7)

147085


0-4.72 (0-120)

6.82 (3.1)

147120


0-6.30 (0-160)

8.14 (3.7)

147160

26

max. 100 70 Nm N ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0


27


Grip akro•


®

M

52

52mm Ø 16

52mm Ø 16

52 96mm Ø 16 46

max. N Ø 20 mm 16 4670 mm

max. max. 70 Nm N max. 100 46


Makro•Grip® 5-Axis Vise 125 Description/Type


Weight in lbs (kg)

Part #


0-8.07 (0-205)

23.98 (10.9)

147205


0-12.01 (0-305)

33.44 (15.2)

147305

28

max. 100 70 Nm N ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0


29

Makro•Grip® Profile Clamping Vise – Your clamping system for all profile parts

Makro

•Grip

®

ing Clamp Profile 080 49 Item #

Centering accuracy ±0.02mm

ip®

Makro•Gr

Soft add-on jaws. Mounted from below to the base jaws via 4 screws (M8x20 / M10x25)

ping Profile Clam 80 Item # 490

Soft add-on jaws. Mounted from the top to the base jaws via 4 screws (M8x20 / M10x25)

Double guided jaws

g

Grip Makro•

®

Clampin Profile 49080 Item #

Hardened base jaws

Stable and sturdy base - lightweight and handy


30

Makro•Grip® Profile Clamping

Alternatively, you can also save money by manufacturing your own soft addon jaws! Drawings available upon request!

 Cost effective through manufacturing of your own soft add on jaws  Precision positioning of the add-on jaws through key ways  Quick change over for different shaped individual profile jaws  Large jaw to accommodate multiple profiles in one jaw

Makro•Gri

p®

Profile Cl maping Item # 49 200

31

mm

Makro•Grip® 77 Profile Clamping

Makro•Grip® 77 Profile Clamping Vise with Base Jaws Makro•Grip® 77 Profile Clamping Vise with Base Jaws Distance in inches (mm)

Weight in lbs (kg)

Part #

Makro•Grip® 77 Profile Clamping Vise, base length 4.01“ (102mm)

0.39 (10)

7.26 (3.3)

149010


1.57 (40)

8.14 (3.7)

149040 (147770-130)

Makro•Grip® 77 Profile Clamping Vise, base max. 100mm Nm ± 0.02 ± 0.02 mm length 6.69“ (170mm)

3.15 (80)

9.46 (4.3)

149080 (147770-170)

Description/Type

•Grip

Makro

52mm Ø 16

52mm Ø 16 46


®


ping Clam Profile 040 # 49 Item


max. 100 70 Nm N ±max. 0.02 mm

You are also able to mount your machined add-on jaws top down thanks to the thread in the base jaws.

Soft add-on jaws for Makro•Grip® Profile Clamping Vise 77 Description/Type

Weight in lbs (kg)

Part #

Add-on steel jaws 4.41x2.24x1.42“ (112x57x36mm) 1 pair

7.7 (3.5)

149776 (147776)

Add-on aluminum jaws 4.41x2.24x1.42“ (112x57x36mm) 1 pair

2.64 (1.2)

149777 (147777)

32

mm

Makro•Grip® 125 Profile Clamping

Makro•Grip® 125 Profile Clamping Vise with Base Jaws Makro•Grip® 125 Profile Clamping Vise with Base Jaws

ping

rip

ro•G

Mak

52mm Ø 16

52 96mm Ø 16 46

max. N Ø 20 mm 16 4670 mm

®


m le Cla Profi 49100 # Item


max. 100 70 Nm N ±max. 0.02 mm

max. 100mm Nm ± 0.02

Description/Type

Distance in inches (mm)

Weight in lbs (kg)

Part #


3.94 (100)

27.06 (12.3)

149100 (147250-210)


7.87 (200)

36.52 (16.6)

149200 (147250-310)

± 0.02 mm

You are also able to mount your machined add-on jaws top down thanks to the threaded base jaws.

Soft add-on jaws for Makro•Grip® Profile Clamping Vise 125 Description/Type

Weight in lbs (kg)

Part #

Add-on steel jaws 6.30x2.24x1.85“ (160x57x47mm) 1 pair

19.58 (8.9)

149256 (147256)

Add-on aluminum jaws 6.30x2.24x1.85“ (160x57x47mm) 1 pair

7.04 (3.2)

149257 (147257)

33

Makro•Grip® Dual Clamping Vise – Change our Makro•Grip® centering vise to a Dual Clamping Vise with our conversion kit

Additional clamping location for non-stamped workpieces and semi-finished parts

Equipped with doublesided holding teeth contour. Resting height 3 mm

Floating assembly of movable jaws allows safe clamping of workpieces with different lengths up to 2 mm difference (saw cut allowance)

Threading to attach end stop

Double guided jaws

Stable and sturdy base lightweight and handy

34

Makro•Grip® Dual Clamping

Transform your Makro•Grip® into a Dual Clamping Vise within a few moments!

To remove the Makro•Grip® jaws from the base unit, unscrew the jaws using an Allen wrench.

Flip base unit and remove center screw with an Allen wrench.

Remove spindle and centerpiece with a mallet and drift punch.

Assemble the Makro•Grip® jaws back onto the base. You are able to use your Makro•Grip® vise as a Dual Clamping Vise now.

Replace the spindle + centerpiece with the middle jaw + spindle and tighten the screw on the bottom of the base.

Also available as a conversion kit for Dual Profile Clamping (see page 37)

35

Makro•Grip® 5-Axis Vise Dual Clamping

Spindle + Center Jaw for Makro•Grip® 5-Axis Vise 46 Description/Type Spindle length 3.23“ (82mm), Ø16 mm

Clamping range in inches (mm)

Weight in lbs (kg)

For Makro•Grip®

Part #

2x0.98 (2x25)

0.44 (0.20)

147065

147065-TG

Spindle + Center Jaw for Makro•Grip® 5-Axis Vise 77 Clamping range in inches (mm)

Weight in lbs (kg)

For Makro•Grip®

Part #

Spindle length 4.04“ (102.5mm), Ø16 mm

2x1.38 (2x35)

1.21 (0.55)

147085

147085-TG

Spindle length 5.31“ (135 mm), Ø16 mm

2x1.97 (2x50)

1.32 (0.60)

147120

147120-TG (147077-130)

Spindle length 6.89“ (175mm), Ø16 mm

2x2.76 (2x70)

1.54 (0.70)

147160

147160-TG (147077-170)

Description/Type

Spindle + Center Jaw for Makro•Grip® 5-Axis Vise 125 Clamping range in inches (mm)

Weight in lbs (kg)

For Makro•Grip®

Part #


2x3.54 (2x90)

2.97 (1.35)

147205

147205-TG (147125-210)


2x5.51 (2x140)

3.52 (1.6)

147305

147305-TG (147125-310)

Description/Type

36

Makro•Grip® Profile Dual Clamping

Spindle + Center Base Jaw 4.41x1.81“ (112x46mm) for Makro•Grip® Profile Clamping Vise 77 Description/Type Spindle length 6.89“ (175mm), Ø16 mm

For Profile Clamping Vise

Distance x inches (mm)

Weight in lbs (kg)

Part #

149080 (147770-170)

2x0.71 (2x18)

2.31 (1.05)

149080-TG (147160-TG)

Spindle + Center Base Jaw 6.30x2.24“ (160x57mm) for Makro•Grip® Profile Clamping Vise 125 For Profile Clamping Vise

Distance in inches (mm)

Weight in lbs (kg)

Part #


149100 (147250-210)

2x0.79 (2x20)

5.5 (2.5)

149100-TG


149200 (147250-310)

2x2.76 (2x70)

5.94 (2.7)

149200-TG

Description/Type

Soft add-on jaws for Makro•Grip® Dual Profile Clamping Description/Type

Weight in lbs (kg)

Part #

Add-on jaws 77, steel, 3pcs 4.41x2.24x1.42“ (112x57x36mm)

11.66 (5.3)

149774

Add-on jaws 77, aluminum, 3pcs 4.41x2.24x1.42“ (112x57x36mm)

3.96 (1.8)

149775

Add-on jaws 125, steel, 3pcs 6.30x2.24x1.85“ (160x57x47mm)

29.26 (13.3)

149254

Add-on jaws 125, aluminum, 3pcs 6.30x2.24x1.85“ (160x57x47mm)

10.56 (4.8)

149255

37

Makro•Grip® Precision Vise Vario – The convenient and highly precise clamping solution for machining the 6th side Centering accuracy ± 0.01 mm The rows of pins are used as support and end stop

Positioning accuracy of the pins is ± 0.01mm

Double, extended guide rail for the jaws

rip

o•G Makr

®

NEW

Vario 42097 # Item

!

Threaded bores to attach Universal endstop Use an airpistol to extend the pins row by row

Stable and sturdy base lightweight and handy


38

Makro•Grip® Precision Vise Vario

 Perfect for the challenging machining of the 6th side  Highly precise  No parallels or endstops needed  Repeatable feeding and stopping  Quick positioning changes  Laser markings on jaws allows easier repeatability of clamping positions

And this is how it works:

rip

Makro•G

®

Vario 102 Item # 42

The pins are blown out with compressed air at high accuracy (±0.01 mm). Push back the pins not needed easily by hand.

Even small and flat workpieces can be fixed and clamped easily, quickly and safely in Makro•Grip® Vario jaws. No more damaging of parallels while drilling near to the jaw.

39

Makro•Grip® Precision Vise Vario 77


Makro•Grip®

52

Vario Item # 42057

52mm Ø 16

52mm Ø 16

52mm Ø 16 46




Makro•Grip® Precision Vise Vario 77 Clamping range in inches (mm)

Weight in lbs (kg)

Part #

Makro•Grip® Precision Vise Vario 77 Base length 5.12“ (130mm)

2.17 (55)

7.7 (3.5)

142057


3.74 (95)

9.02 (4.1)

142097

Description/Type

40

max. 100 70 Nm N ± 0.01 mm ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0



Makro•Grip®

Vario Item # 42102

52mm Ø 16

52

52mm Ø 16

52 96mm Ø 16 46

max. N Ø 20 mm 16 4670 mm



Makro•Grip® Precision Vise Vario 125 Clamping range in inches (mm)

Weight in lbs (kg)

Part #


3.94 (100)

26.62 (12.1)

142102


7.87 (200)

35.86 (16.3)

142202

Description/Type

41

max. 100 70 Nm N ± 0.01 mm ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0

Accessories for Makro•Grip® Precision Vise Vario

Air pressure pistol Part #

Quantity

120004

1

• Ideal handling • Perfect for Makro•Grip® Precision Vise Vario • Best supply of air pressure

Replacement pins for Makro•Grip® Precision Vise Vario jaws Part #

Diameter

Size

120000

Ø 4 mm

Vario 77

120001

Ø 6 mm

Vario 125

Quantity 1 set (5 pcs)

Pins damaged by collision should be replaced.

O-rings for pins

Ø 3.5 x 2 mm

Part #

Diameter

Size

1200009

Ø 2 x 1.5 mm

Vario 77

1200010

Ø 3.5 x 2 mm

Vario 125

Pins damaged by collision should be replaced.

42

Quantity 1 set (100 pcs)

Makro•Grip® Precison Vise Vario Accessories

To avoid the gumming of the coolant please make sure to use air to clean the pins after each process. It is recommended to use occasionally multifunctional oil to assure the smooth movement of the pins.

43

Makro•Grip® Precision Vise Avanti: Precise, flexible, fast – The ideal clamping solution for the 6th side. Improved centering accuracy ± 0.01mm

NEW

!

Add-on jaws available in different heights and in steel or aluminium

Highly precise positioning on the add-on jaws due to the patented cut surface

® akro•Grip

M

Improved jaw guidance rails for highest precision and parallelism

Avanti 140 Item # 42

Change over of the add-on jaws in seconds with only one screw

Integrated clamping stud for precise clamping in the Quick•Point® zero-point system

44

Makro•Grip® Precison Vise Avanti

Enormous set-up savings and best possible flexibility!

Change over add-on jaws in seconds Clamping situations can be reproduced with high repeatability

due to the patented change over system of the jaws High precision centering accuracy and parallelism Machinable add-on jaws are perfect for parts that are

difficult to clamp, which makes it ideal for the 6th side The soft add-on jaws allow through maximum usable

volume the placement of any contour, no matter if

cubical, round or odd shaped

Add-on jaws can be used twice by adding contours on both sides of the jaws.

Makro•Grip®

45

Avanti Item # 42140

Makro•Grip® Precision Vise Avanti 77

® akro•Grip

M

52

52mm Ø 16


52mm Ø 16

52mm Ø 16 46




Makro•Grip® Precision Vise Avanti 77 Description/Type

Range in inches (mm)

Weight in lbs (kg)

Part #

Makro•Grip® Precision Vise Avanti 77 Base length 5.12“ (130mm)

0.59 (15)

8.2 (3.7)

142140


2.17 (55)

9.7 (4.4)

142180

46

max. 100 70 Nm N ± 0.01 mm ±max. 0.02 mm

max. 100mm Nm ± 0.02

± 0.0

Makro•Grip® Precison Vise Avanti 77

Soft add-on jaws for Makro•Grip® Precision Vise Avanti 77

Example: Aluminum 1.42“

Description/Type

Height in inch (mm)

Weight in lbs (kg)

Part #

Add-on steel jaws, 1 pair

1.42 (36)

5.3 (2.4)

142776-36


2.20 (56)

8.4 (3.8)

142776-56

Add-on aluminum jaws, 1 pair

1.42 (36)

1.8 (0.8)

142777-36


2.20 (56)

2.9 (1.3)

142777-56

47

Makro•Grip® Precision Vise Avanti 125

rip

Makro•G

52

52mm Ø 16

®


52mm Ø 16

52 96mm Ø 16 46

max. N Ø 20 mm 16 4670 mm



max. 100 70 Nm N ± 0.01 mm ±max. 0.02 mm

Makro•Grip® Precision Vise Avanti 125 Description/Type

Range in inches (mm)

Weight in lbs (kg)

Part #


1.97 (50)

26.5 (12.0)

142230


5.91 (150)

35.0 (15.8)

142330

48

max. 100mm Nm ± 0.02

± 0.0

Makro•Grip® Precison Vise Avanti 125

Soft add-on jaws for Makro•Grip® Precision Vise Avanti 125

Example: Steel 1.42“

Description/Type

Height in inch (mm)

Weight in lbs (kg)

Part #


1.42 (36)

11.5 (5.2)

142256-36


2.99 (76)

24.8 (11.2)

142256-76


1.42 (36)

4.0 (1.8)

142257-36


2.99 (76)

8.6 (3.9)

142257-76

49

Spare jaws for Makro•Grip® 5-Axis Vise Spare jaws Makro•Grip® 5-Axis Vise Description/Type

Weight in lbs (kg)

Part #

Spare Grip jaws for Makro•Grip® 46, 1 pair

1.1 (0.5)

147046-20


3.52 (1.6)

147077-20


11 (5.0)

147125-20

Profile jaws for Makro•Grip® 5-Axis Vise Profile jaws Makro•Grip® 5-Axis Vise Description/Type

Dimensions in inches (mm)

Weight in lbs (kg)

Part #

Profile jaws for Makro•Grip® 46, 1 pair

1.81x0.83x0.79 (46x21x20)

1.1 (0.5)

147469


3.03x1.38x1.18 (77x35x30)

3.52 (1.6)

147779


4.92x1.85x1.57 (125x47x40)

11 (5.0)

147259

Base jaws retrofitting kit for all Makro•Grip® 5-Axis Vise Base jaws for Makro•Grip® 5-Axis Vise Dimensions in inches (mm)

Weight in lbs (kg)

Part #

Base jaws for Makro•Grip® 77, incl. key ways and screws, 1 pair

4.41x1.81 (112x46)

3.3 (1.5)

149771 (147770)

Base jaws for Makro•Grip® 125, incl. key ways and screws, 1 pair

6.30x2.24 (160x57)

9.02 (4.1)

149251 (147250)

Description/Type

50

Makro•Grip® 5-Axis Vise Accessories

Spindle covers stop chip clogging! 2 types available: For serial parts: Cover that snaps into the guidance

•Grip

Makro

®

For single or serial parts: Flexible spindle cover made of industrial foam

Vise 5-Axis 205 47 Item #

o•Grip

Makr

Covers can be trimmed to the respective clamping range.

for Makro•Grip® 77, 1.57x2.76“ (40x70mm) for Makro•Grip® 125, 2.91x3.94“ (74x100mm)

Vise 5-Axis 7205 #4 Item

Foam covers are inserted in the space on either side of the vise. Upon tightening the jaws, the foam is almost fully compressed returning to its original size on release.

Spindle cover industrial foam

Spindle cover plastic Description/Type

®

Quantity

Part #

Description/Type

147077-70

for Makro•Grip 46, width 0.39“ (10mm)

Quantity

®

for Makro•Grip® 77, width 0.79“ (20mm)

1 Set (10pcs) 147125-70

for Makro•Grip® 125, width 1.18“ (30mm)

51

Part # 147046-80

1 Set (10pcs)

147077-80 147125-80

t n i o P • k Quic

®

52

Quick•Point® Raster page 62

Quick•Point® Clamping Studs page 75

Quick•Point® Rectangular page 64

Quick•Point® Support Plates page 76

Quick•Point® Adapter page 66

Quick•Point® Gauges page 77

Quick•Point® Round page 68

Quick•Point® Quick-Lock page 78

Quick•Point® Twin-Bases page 72

Quick•Point® Accessories page 79

Quick•Point® Sub-Bases page 74

Quick•Point® Tri-Top Tombstone page 80

53

Right to the point with Quic The flexible 0-Point clamping system with modular building components – compatible with

Tri-Top 3-face zero-point clamping tombstone for optimal machine cycle times.

Raster Measurement: Actual dimensions of the zero-point system

Clamping Stud size: Diameter of the clamping stud

Vise Size: width of the vise base Quick-Lock: adaptability with Quick-Lock accessory Custom Mounting Options: Table specific mounting bores and alignment keys possible

Round plate The ideal zero-point clamping plate for rotary and 5-axis tables

54

k•Point ! ®

MADE IN GERMANY

almost all machine tools.

Twin-Base For 5-face machining on 3-axis machines

Raster plate Efficient use of machine table top with flexible use of the zero-point clamping raster.

Rectangular plate Universal zero-point clamping system for all working stations

55

Quick•Point® zero-point clamping system – Easy, precise With a height of only 1.06“ (27mm), the lowest zero-point clamping plate on the market. 4 x M5 thread for 90 degree indexing position for batch production

Covers for mounting bores

Mounting of plate on machine tool table via clamps (see page 79)

High repeatability (< 0.0002“ (< 0.005 mm))

Rigid, compact base plate made of case-hardened quality steel. Height 1.06“ +/- 0.00039“ (27mm +/- 0.01mm)

Robust mechanical clamping with one actuation screw. (Max. torque 30 Nm)

Quick-Lock– the new fast locking system (optional accessory). See page 78

56

Quick•Point®

and high holding power.

Makro•Grip®


Quick•Point® offers ideal setting for Makro•Grip® vises

Easy adaptation of clamping different vises, fixtures or workpieces by using clamping studs, which are available to buy separate as sets of 4.

 Extremely flexible mounting for different machine tables  Modular system for different clamping needs  Highly precise repeatability  Extraordinary longevity with simple and robust mechanism  Only 1.06“ (27mm) high, the lowest zero-point plate on the market  Clamping force of 13227lbs (6000kg)

Quick•Point® – not only highly precise, but also provides high mechanical load capacity. Example: Weight of workpiece 385 lbs. (175 kg) and 20.70“ (525 mm) height.

57

Different Quick•Point® applications:

58

Quick•Point®

59

Mounting and alignment variations for Quick•Point® zero-point system 1

3 Mounting: Alignment:

2

Mounting: via standard bores

Mounting: via clamps

Alignment: with keys

Alignment: with keys

The standard Quick•Point® plates with the existing mounting bores are attached with nuts in the t-slots of the machine table. The plate will be aligned via keys. The bottom of the plate has 20H7 keyways.

Some of the rectangular Quick•Point® plate sizes also has a version with clamping edges in addition to mounting bores. This clamping edge can be used to attach the plate with clamps to the machine table. The plate will be aligned via the keyways.

60

via custom mounting bore drawing with keys and t-fittings

Round plates are best attached to the machine table with custom mounting bores and t-fittings. Ideally the concentric alignment is done via one t-fitting, which has on one side the measurement (12H7) of the center bore of the Quick•Point® plate and on the other side the measurement of the round machine table. It is enough to use an additional key on the underside of the Quick•Point® plate for the axial alignment. As an alternative to the t-fitting 2 keys can be used in each recess if the layout of the machine table allows it.

Quick•Point®

4

Mounting: via custom mounting bore drawing Alignment: with keys Each of the Quick•Point® plates is also available without mounting bores or clamping edges. This allows the modification of the plates to accomodate custom bores specific to the t-slot pattern of the machine table. In addition custom keyways can be machined into the underside of the plate (if necessary with threads for fixed attachment). These modifications can be done by LANG for an additional charge or by the customers themselves (plates are case hardened to 57HRc with a depth of 0.7mm)

5 Mounting: via custom mounting bore drawing Alignment: with Quick•Point® Gauges The standard Quick•Point® plates with the existing mounting bores are attached with nuts in the t-slots of the machine table. The alignment is done with a highly precise Quick•Point® Gauge. A probe can measure along the coordinateground sides of the Gauge and the plate can be aligned accordingly

6

Mounting: via custom mounting bore drawing Alignment: with Quick•Point® Gauges The alignment can be done via the Quick•Point® Gauge after the round plates are attached to the machine table with the custom bores. The probe measures along the coordinate-ground sides of the Gauge to determine the axial aligment. The concentric alignment will be achieved with the inside diameter of the Gauge.

61

Quick•Point® Raster 82 52

for M10

Quick•Point® raster plates

104

Quick•Point® 52 12,02 t = 27 mm 104

52

Ø 16 mm

46

±Ø0.02 mm 16 mm mm

max. 100 52mm Nm Ø 16

max.5270 N

46/77 46

max.46 70 N

max. max.100 70 Nm N

max. ± 0.01

Weitergabe sowie Vervielfaeltigung dieser Unterlage, Verwertun soweit nicht ausdruecklich zugestanden. Zuwiderhandlungen ve Alle Rechte fuer den Fall der Patenterteilung oder Gebrauchsmu

Quick•Point® raster plate 52 with mounting bores

Description/Type

Copying of this document, and giving it to others and the use or are forbidden without express authority. Offenders are liable to th

Weight in lbs (kg)

Quick•Point® raster plate 52, stud distance 52 mm with mounting bores Dimensions 4.09x4.09x1.06“ (104x104x27mm)

All rights are reserved in the event of the grant of a patent or the Part #

4.4 (2.0)

0

1

2

3

4

allg.Toleranzen DIN 7168 - m Basic Tol.

Oberflächenangabe nach DIN ISO 1302(3141) Surface finih to

175600

5

6

7

8

9

Datum/Date

Name

Bearb. 27.01.10 Feuchter Gepr. Norm

10 Zust.

Änderung/ Revision

Datum/Date

Name

Zeichnung geschützt nach DIN 34

Quick•Point® 96

Mounting bores can be machined in the shaded area only. Prices upon request.

52

Ø 16 mm

46

max.5270 N

max. 100 52mm Nm Ø 16

±Ø0.02 mm 16 20 mm mm

52 125 46

max. 70 Ø 16 46 mmN

Quick•Point® raster plate 96 without mounting bores

Description/Type Quick•Point raster plate 96, stud distance 96 mm without mounting bores, Dimensions 7.56x7.56x1.06“ (192x192x27mm) ®

62

Weight in lbs (kg)

Part #

15.84 (7.2)

145710


max. 100mm Nm ± 0.02 46

max. ± 0.0

Quick•Point® Alignment Gauge

Alignment Gauge for quick assembly For simple assembly of Quick•Point® raster plates we recommend to use the Alignment Gauge. Precise aligning and dimensional accuracy of plates is guaranteed.

Ausrichten von QuickPoint-Rasterplatten mitt Alignment Gauge for Quick•Point® raster plates Description/Type

Ausrichten Ausrichten von von QuickPoint-Rasterplatten QuickPoint-Rasterplatten mittels mittels Ausrichtlehre Ausrichtlehre Alignment Gauge 52 Alignment Gauge 96

Weight in lbs (kg)

Part #

14.3 (6.5)

144152

25.52 (11.6)

144196

-

144152-10

-

144196-10

Aufsetzen der mit Befestigungsschr In 2 Bohrungen w die Ausrichtung in übernehmen.

Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre Alignment Gauge 52

for rent (4 weeks) Aufsetzen Aufsetzen derder mittleren mittleren 4 Platten 4 Platten mit mit denden erforderlichen erforderlichen Befestigungsschrauben. Befestigungsschrauben. Alignment Gauge In 2InBohrungen 2 Bohrungen werden werden zunächst zunächst Paßstifte Paßstifte eingesetzt, eingesetzt, die die die die Ausrichtung Ausrichtung in der in der NutNut desdes Maschinentisches Maschinentisches for rent (4 weeks) übernehmen. übernehmen.

96

Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.

Zusätzlich wird üb übergreifend die A

Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre Zusätzlich Zusätzlich wirdwird über über allealle 4 Quick 4 Quick Point Point Platten Platten übergreifend übergreifend die die Ausrichtlehre Ausrichtlehre eingesetzt. eingesetzt. Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.

Set up of the 4 middle raster plates with the mounting screws. Locating pins will be used in 2 of the the bores. They are used to align the plates with T-slot on the machine table.

In addition the Alignment Gauge will be Sind Sind die die erreichbaren Befestigungsschrauben Befestigungsschrauben used to erreichbaren overlay on all 4 plates. angezogen angezogen werden, werden, die die Paßstifte Paßstifte gezogen gezogen undund durch durch

Befestigungsschrauben Befestigungsschrauben ersetzt. ersetzt. Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.

Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.

Sind die erreic angezogen we Befestigungss

After the reachable mounting screws are tightened the locating pins will be removed and exchanged for mounting screws. Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.

Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleic

Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.

NunNun werden werden die die äußeren äußeren Quick Quick Point Point Platten Platten mittels mittels derder Ausrichtlehre Ausrichtlehre sinngleich sinngleich ausgerichtet ausgerichtet undund befestigt. befestigt.

Now this process will be repeated for any additional plates being added on either side.

Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.

63

Quick•Point® 52 Rectangular

Quick•Point® 52 see page 79 for the suitabl e clamps

52

Ø 16 mm

46

max.5270 N

max. 100 52mm Nm Ø 16

±Ø0.02 mm 16 mm mm

46/77 46

max.46 70 N


max. ± 0.01

max. 100mm Nm ± 0.02 46

max. ± 0.0

Quick•Point® plate 52 Description/Type

Weight in lbs (kg)

Part #

6.38 (2.9)

145150

Quick•Point® plate 52, stud distance 52 mm with mounting bores and clamping edges, Dimensions 5.91x4.57x1.06“ (150x116x27mm)


52

Ø 16 mm

46

max.5270 N

max. 100 52mm Nm Ø 16

±Ø0.02 mm 16 mm mm

52 46/77 46

max. 70 Ø 16 46 mmN

Quick•Point® plate 52 Description/Type

Weight in lbs (kg)

Part #

7.48 (3.4)

145151

Quick•Point plate 52, stud distance 52 mm without mounting bores and clamping edges, Dimensions 5.91x4.57x1.06“ (150x116x27 mm) ®

64


Quick•Point® 96 Rectangular

Quick•Point® 96

see page 79 for the suitabl e clamps

52

Ø 16 mm

46

max.5270 N

max. 100 52mm Nm Ø 16

±Ø0.02 mm 16 20 mm mm

125 46

max.46 70 N


max. ± 0.01

max. 100mm Nm ± 0.02 46

max. ± 0.0

Quick•Point® plate 96 Description/Type Quick•Point® plate 96, stud distance 96 mm with mounting bores and clamping edges, Dimensions 7.56x6.14x1.06“ (192x156x27mm)

Weight in lbs (kg)

Part #

12.1 (5.5)

145400


52

Ø 16 mm

46

max.5270 N

max. 100 52mm Nm Ø 16

±Ø0.02 mm 16 20 mm mm

52 125 46

max. 70 Ø 16 46 mmN

Quick•Point® plate 96 Description/Type Quick•Point plate 96, stud distance 96 mm without mounting bores and clamping edges, Dimensions 7.56x6.14x1.06“ (192x156x27mm)

Weight in lbs (kg)

Part #

13.2 (6.0)

145401

®

65


Adaptability from large to small – These Adapter Plates will make it effortless! For reductions from 96mm stud distance to 52mm stud distance

Upper 52mm Ø 16 interface:

52

Ø 16 mm mm

46/77 46

max.46 70 N


52

max. 100mm Nm ± 0.02

± 0.02 mm

Ø 16 mm

46

Lower max. 100 Nm interface:

max. 70 N

52 96 mm ± 0.02

Quick•Point® 52 Adapter Plate Description/Type Quick•Point® adapter 52, reduction from 96 to 52mm stud distance. Dimensions 5.91x4.96x1.06“ (150x126x27mm)

Weight in lbs (kg)

Part #

7.48 (3.4)

145160

52 mm

96 mm

66

Ø 16 20 mm mm

46

max.

Quick•Point® 96 to 52 Adapter Plate

Adapt from large to small set-up in 1 minute! Our Quick•Point® system is so flexible and time saving that the larger Quick•Point® plate can remain mounted to the machine table for machining with large and small vises. For a quick change over the Adapter Plate reduces the clamping stud distance from the 96mm system to the 52mm system with only 1 actuation screw. In 3 quick steps the system is changed over.

Makro•Grip®

Step 1: Loosen the actuation screw in the Quick•Point® plate mounted on the machine table to release the larger vise. Step 2: Exchange this larger vise with the Adapter Plate with clamping studs and tighten the actuation screw on the Quick•Point® plate mounted on the table. Step 3: Insert the smaller vise in the Adapter Plate and tighten the actuation screw on the Adapter Plate. These steps take approximately 1 minute.


For Example: The height difference between the large Makro•Grip® 5-axis set-up and the small Makro•Grip® 5-axis set-up with the Adapter Plate is 3mm. Total set-up height for larger vise is: Quick•Point® plate on machine table 27mm and large Makro•Grip® 5-axis vise 89mm total set-up height is 116mm. Total set-up height for small vise is: Quick•Point® plate on machine table 27mm, Adapter Plate 27mm and small Makro•Grip® 5-axis vise 65mm. Total set-up height is 119mm.

Makro•Grip®


67

Quick•Point® round plates – Ideal adaptation for indexers, 5Quick•Point® 52

NEW

!

52

52

Ø 16 mm

Ø 16 mm mm

46/77 46

4

max. 70 N

max. 1

Quick•Point® round plate 52 Description/Type

Weight in lbs (kg)

Part #

4.18 (1.9)

145750

Quick•Point plate 52, stud distance 52 mm with mounting bores, Dimensions Ø4.57x1.06“ (Ø116x27mm) ®

Quick•Point® 52 – with 38H7 center bore

NEW

!

52

52

Ø 16 mm

46/77 46

Mounting bores can be machined in the 52 Ø 16 mm shaded area only. Prices upon request.

Quick•Point® round plate 52 with center bore Description/Type Quick•Point® plate 52, stud distance 52 mm without mounting bores, center bore 38H7, Ø1.50“ (Ø38mm) +/-0.03mm, Dimensions Ø6.18x1.06“ (Ø157x27mm)

68

Ø 16 mm mm

Weight in lbs (kg)

Part #

7.72 (3.5)

145902

4

max. 70 N

46

max. 1

max.

Quick•Point® 52 Round

axis machining and rotary tables

52

52mm Ø 16

Ø 16 mm mm

Quick•Point® round plate 52 Description/Type Quick•Point plate 52, stud distance 52 mm with mounting bores, Dimensions Ø6.18x1.06“ (Ø157x27mm) ®

Weight in lbs (kg)

Part #

7.7 (3.5)

145900

Use your Quick•Point® plate 145900 as an adapter!

52 mm Makro•Grip®


Makro•Grip®


96 mm

Transform Quick•Point® plate 145900 to Quick•Point® Adapter Plate by simply adding 20 mm clamping studs!

69

46/77 46

max.46 70 N

max. max.1

Quick•Point® 96

NEW

!

52

52

Ø 16 mm

Ø 16 20 mm mm

125 46

4

max. 70 N

max. 1

Quick•Point® round plate 96 Description/Type Quick•Point® plate 96, stud distance 96 mm with mounting bores, Dimensions Ø6.93x1.06“ (Ø176x27mm)

Weight in lbs (kg)

Part #

10.34 (4.7)

145800

52

52

Ø 16 mm

125 46

Mounting bores can be machined in the shaded area only. Prices 52 Ø 16 mm upon request Quick•Point® round plate 96 Description/Type Quick•Point plate 96, stud distance 96 mm without mounting bores, Dimensions Ø7.72x1.06“ (Ø196x27mm) ®

70

Ø 16 20 mm mm

Weight in lbs (kg)

Part #

13.2 (6)

145820

4

max. 70 N

46

max. 1

max.

Quick•Point® 96 Round

Quick•Point® 96 with 62H7 center bore

Ø 16 20 mm mm

52

52

Ø 16 mm

125 46

Mounting bores can be machined in the shaded area only. Prices 52 Ø 16 mm upon request Quick•Point® round plate 96 with center bore Description/Type

Weight in lbs (kg)

Part #

Quick•Point® plate 96, stud distance 96 mm without mounting bores, with center bore 62H7 Ø2.44“ (Ø62mm) +/-0.03mm, Dimensions Ø6.93x1.06“ (Ø176x27mm)

9.02 (4.1)

145802

Quick•Point® plate 96, stud distance 96 mm without mounting bores, with center bore 62H7, Ø2.44“ (Ø62mm) +/-0.03mm, Dimensions Ø7.72x1.06“ (Ø196x27mm)

11.9 (5.4)

145822

Quick•Point® plate 96, stud distance 96 mm without mounting bores, with center bore 62H7, Ø2.44“ (Ø62mm) +/-0.03mm, Dimensions Ø9.69x1.06“ (Ø246x27mm)

19.6 (8.9)

145842

Quick•Point® zero-point plates with center bore. Perfect for rotary tables with bar feeders and air/hydraulic connections. Please note: clamping via 2 opposing actuation screws.

71

4

max. 70 N

46

max. 1

max.

Twin-Base with integrated Quick•Point® system, high strength

Quick•Point® Twin-Base 52


NEW

!

Upper and lower interface are the same

52

52mm Ø 16

Ø 16 mm mm

46/77 46

Quick•Point® Twin-Base 52 Description/Type Double-sided zero-point clamping, 52 mm stud distance

max.46 70 N


max. 100mm Nm ± 0.02

52 ± 0.02 mm

52 96mm Ø 16

Ø 16 20 mm mm

125 46

Quick•Point® Twin-Base 96 Weight in lbs (kg)

Part #

Description/Type

30.36 (13.8)

147220

Double-sided zero-point clamping, 96 mm stud distance

72

Weight in lbs (kg)

Part #

61.6 (28)

147520

max.46 70 N

max. max.1

Quick•Point® Twin-Base

and sturdy, case-hardened and ground rectangular to 0.01mm

4 x 90° Perfect for the manual 5-face machining of workpieces with 3-axis machines. With vises the workpieces can be rotated 4 x 90° with precision repeatability.

73

Quick•Point® Sub-Base

Sub-Bases for Quick•Point® plates – Increase accessibility to workpiece on 5-axis machine tools

52

52 96mm Ø 16

Ø 16 20 mm mm

125 46

max.46 70 N

max. max.1

max.46 70 N

max. max.1

Sub-Base for Quick•Point® 96 mm stud distance Description/Type Height 3.94“ (100mm)

Quic

ase

Sub-B

Part #

17.38 (7.9)

144100

Compatible to Quick•Point® plate 145400. High strength, compact, surface of hard-coated aluminum. Sub-Base designed with clearance for easy mounting and alignment to table (20H7 bore) or use clamping studs to clamp Sub-Base on Quick•Point® plate.

00

® Item # 441

t k•Poin

Weight in lbs (kg)

Included in delivery: 4 screws M10 + 2 bushings for positioning of Quick•Point® plate.

52

52 96mm Ø 16

Ø 16 20 mm mm

125 46

Sub-Base round for Quick•Point® 96 mm stud distance Description/Type Height 3.94“ (100mm)

NEW !

Weight in lbs (kg)

Part #

26.01 (11.8)

144010

Compatible to Quick•Point® plate 145800 (upper diameter 176mm/lower diameter 246mm). High strength, compact, surface of hard-coated aluminum. Use clamping studs Ø 20 mm to clamp Sub-Base on Quick•Point® plate. Individual mounting bores through the base at the angled location also possible. Included in delivery: 6 screws M10 + 2 bushings for positioning of Quick•Point® plate.

74

Quick•Point® Clamping Studs

Quick•Point® clamping studs – Utilize studs in vises, fixtures or workpieces for easy mounting and clamping

Quick•Point® clamping studs (Set of 4) Description/Type

Weight in lbs (kg)

Part #

Clamping studs Ø 16 mm, for 52 mm stud distance

0.2 (0.09)

145270 (125270)

Clamping studs Ø 20 mm, for 96 mm stud distance

0.4 (0.18)

145570 (125570)

Mounting of Quick•Point® clamping studs

52

96

with threaded bolt

Mit Schrauben 52

96

via screws

Place the 4 studs with an accuracy of ± 0.01 mm squared!

75

Quick•Point® clamping studs are perfectly suitable for stripping down or activating fixtures.

Quick•Point® Support Plate

Quick•Point® Support Plates, soft – For individual adaptation of fixtures and other devices

52 52 52 52

Ø Ø16 16 16mm mm mm Ø mm

46 46 46

max. max. max.

46 46 46

max. max. max.

Steel Support Plates 52, soft Description/Type 3.78x3.78x1.06“ (96x96x27mm), for 52 mm stud distance 6.14x6.14x1.06“ (156x156x27mm), for 52 mm stud distance

Weight in lbs (kg)

Part #

4.4 (2.0)

145275

11.44 (5.2)

145277

Use Support Plates as a quick change-over for your clamping fixtures

52 52 52 96

Ø Ø16 16 16mm mm mm Ø 20 mm

Steel Support Plates 96, soft Description/Type 6.14x6.14x1.06“ (156x156x27mm), for 96 mm stud distance Use Support Plates as a quick change-over for your clamping fixtures

76

Weight in lbs (kg)

Part #

11.68 (5.3)

145575

Quick•Point® Accessories

Gauging pallet for precise alignment of Quick•Point® plates Gauging pallet 52 Description/Type

Part #

for 52 mm stud distance

144252

- Size of gauge 3.94“ (100mm) square - Case-hardened and ground

ca. 100 mm

Gauging pallet 96 Description/Type

Part #

for 96 mm stud distance

144296

- Size of gauge 4.92“ (125mm) square - Case-hardened and ground

ca. 125 mm

Recommended for rotating axis or chucks

77

Quick•Point® Quick-Lock

Quick•Point® Quick-Lock – NEW ! Simple – quick – secure! Fast actuation system compatible with all square and rectangular plates

opened

Makro•Grip

®

Makro•Grip

®

closed Quick•Point® Quick-Lock Description/Type

Weight in lbs (kg)

Part #

For Quick•Point® systems 52 for rectangular and square plates

0.66 (0.3)

144552

For Quick•Point® systems 96 for rectangular and square plates

0.88 (0.4)

144596

Included in delivery: Quick•Point® Quick-Lock, Levers (2 pcs.), Shims (4 pcs.)

78

Quick•Point® Accessories

Quick•Point® Cover Plugs Description/Type Quick•Point Cover Plugs Ø 16 mm for 52mm stud distance

Quantity

®

Quick•Point® Cover Plugs Ø 20 mm for 96mm stud distance

1 Set (4 pcs)

Part #

145052-20 145096-20

To cover the Quick•Point® clamping bores to avoid debris collecting while not in use.

Quick•Point® Plastic Covers Description/Type Quick•Point® Plastic Covers, Ø 20 mm

Quantity

Part #

1 Set (4 pcs)

145008

To cover up the mounting bores to avoid build up of debris.

Quick•Point® Clamps Description/Type Clamps

Quantity

Part #

1 Set (4 pcs)

127084

Clamps are an alternative option to mount Quick•Point® plate 145150 and 145400 to the machine tool table

79

Tri-Top 3-face-Tombstone

NEW !

Minimize shutdown times for 4 and 5-axis machines!

Integrated Quick•Point® 52 system on all 3 sides.

Simple zero point clamping with only one actuation screw per device.

Longevity and precision through hardened fit bushings

For fast and precise clamping, clamping studs to fit our 96mm Quick•Point® zero point plates are included.

Lightweight aluminum base for ergonomic handling

80

Quick•Point® Tri-Top Tombstone

The sturdy and compact build allows our vises of up to 130 mm in length to be rotated 4x90 degrees with low interference.

 Optimized run times because of minimal tool changes  Made from lightweight aluminum, allows easy handling for set-up outside of machine  low interference with our compact vises  higher capacity with 3 or even 6 workpieces with the use of our dual clamping.

81

Tri-Top 3-face-Tombstone Upper 52mm Ø 16 interface:

52

Ø 16 mm mm

46/77 46

max.46 70 N


max. 100mm Nm ± 0.02

Lower interface:

Set-up examples: Tri-Top with 3 Makro•Grip® 5-Axis Vises 77 (Part # 147120, see page 26)

± 0.02 mm

52 96

Ø 16 20 mm mm

46

max. 70 N

Tri-Top 3-face Tombstone Description/Type Tri-Top 3-face Tombstone for 52 stud distance. Connection to machine table with Quick-Point plates 96

Dimensions

Weight in lbs (kg)

Part #

height: 6.57“ (167mm) diameter: 7.01“ (178mm) without the bumpers

12.1 (5.5)

145352

82

max. 100 Nm

± 0.02 mm

Quick•Point® Tri-Top Tombstone

Typical 5-face machining of workpiece. Maximized efficiency due to multiple clamping.

3-face clamping provides tremendous accessiblity of your tools.

83

Further Quick•Point® applications – Zero-point clamping on horizontal machines

Individual clamping set-up with Quick•Point® zero-point system.

Repeated mounting of your fixture: Shut down and set up within seconds.

84

Quick•Point® Applications

Maximum flexibility – regardless of which clamping device.

Long workpiece up to approx. 800 mm can be machined safely.

Quick•Point® 3-face pyramid Makro•Grip

®

M

ak

ro

•G

rip

®

3-face zero-point clamping pyramid for optimal machine cycle times.

85

Register

Part # 120000

Description/ Type O-Rings for Makro•Grip® Precision Vise Vario 77 pins

Page 42

Part #

Description/ Type

147065-TG

Center jaw + Spindle for Makro•Grip® 46, spindle length 82mm

120001

O-Rings for Makro•Grip® Precision Vise Vario 125 pins

120004 1200009 1200010 145270 (125270) 145570 (125570) 127084

36

42

147077-20

Makro•Grip® spare jaws 77

50

Air pistol for Makro•Grip® Precision Vises

42

147077-70

Spindle covers for Makro•Grip® 77, plastic

51

O-ring for pins Ø2x1,5mm

42

147077-80

Spindle covers for Makro•Grip® 77, industrial foam

51

O-ring for pins Ø3,5x2mm

42

147085

Makro•Grip® 5-Axis Vise 77, length 102mm

26

Quick•Point® clamping studs Ø16mm

75

147085-TG

Center jaw + Spindle for Makro•Grip® 77, spindle length 102.5mm

Quick•Point® clamping studs Ø20mm

75

Quick•Point® clamps

79

141010

Center marking tool for Grip•Fix stamping unit

17

141010-01

Spare marking studs

17

141020

Gauging blocks to measure height of gripping teeth

15

141111

Grip•Fix stamping jaws, standard

16

141112

Grip•Fix stamping jaws, High-End

16

141200

Grip•Fix stamping unit, standard

14

141201

Grip•Fix stamping unit, standard, with High-End jaws

14

141350

Grip•Fix stamping unit, extended

14

141351

Grip•Fix stamping unit, extended, with High-End jaws

14

142057

Makro•Grip® Precision Vise Vario 77, length 130mm

40

142097


40

142102


41

142140

Makro•Grip® Precision Vise Avanti 77, length 130mm

46

142180


46

142202


41

142230


48

142256-36

Add-on jaw for Avanti 125, steel, height 36mm

49

142256-76


49

142257-36

Add-on jaw for Avanti 125, aluminum, height 36mm

49

142257-76


49

147120 Makro•Grip® 5-Axis Vise 77, length 130mm 147120-TG Center jaw + Spindle for Makro•Grip® 77, spindle length 135mm (147077-130) 147125-20 Makro•Grip® spare jaws 125 Spindle covers for Makro•Grip® 125, plastic Spindle covers for Makro•Grip® 125, industrial foam

51

147160 147160-TG (147077-170) 147205 147205-TG (147125-210) 147220

Makro•Grip® 5-Axis Vise 77, length 170mm Center jaw + Spindle for Makro•Grip® Dual Clamping 77, spindle length 175mm Makro•Grip® 5-Axis Vise 125, length 210mm Center jaw + Spindle for Makro•Grip® Dual Clamping 125, spindle length 215mm Quick•Point® Twin-Base 52

26

72

147259

Makro•Grip® profile jaws 125

50

147305 147305-TG (147125-310) 147469

Makro•Grip® 5-Axis Vise 125, length 310mm Center jaw + Spindle for Makro•Grip® Dual Clamping 125, spindle length 315mm Makro•Grip® profile jaws 46

28

72 50

Makro•Grip® Profile Clamping Vise 77, length 102mm

32


32


32

47

142776-56


47

142777-36


47

142777-56


47

149100-TG

74 74

144152

Alignment Plate 52 for Quick•Point® raster plates 52

63

144152-10

Alignment Gauge 52 for rent

63

144196

Alignment Plate 96 for Quick•Point® raster plates 96

63

144196-10

Alignment Gauge 96 for rent

63

144252

Gauging Plate 52

77

144296

Gauging Plate 96

77

144552

Quick•Point® Quick•Lock 52

78

144596

Quick•Point® Quick•Lock 96

78

145008

Quick•Point covers for mounting bores

79

145052-20

Quick•Point® 52 plugs

79

145096-20

Quick•Point® 96 plugs

79

145150

Quick•Point® 52

64

145151

Quick•Point 52, without mounting bores

64

145160

Quick•Point® 52 adaptor plate

66

145275

Quick•Point® support plate 52, 96x96

76

145277

Quick•Point support plate 52, 156x156

76

145352

Quick•Point® Tri-Top

82

145400

Quick•Point® 96

65

145401

Quick•Point® 96, without mounting bores

65

145575

Quick•Point® support plate 96, 156x156

76

145710

Quick•Point® raster plate 96

62

145750

Quick•Point® 52, round, Ø116mm

68

145800


70

145802

Quick•Point® 96, round, Ø176mm, with 62H7 center bore

71

145820


70

145822


71

145842


71

145900


69

145902

Quick•Point® 52, with 38H7 center bore

68

147046-20

Makro•Grip® spare jaws 46

50

147065

Makro•Grip® 5-Axis Vise 46, length 77mm

24

®

®

®

36 50


48

Sub-base for Quick•Point , round

36

Makro•Grip® profile jaws 77

Makro•Grip Precision Vise Avanti 125, length 310mm

Sub-base for Quick•Point®

36 28

147520


144010

51

147779

142330

144100

36 50

147125-80

142776-36

®

36 26

147125-70

149010 149040 (147770-130) 149080 (147770-170) 149080-TG (147160-TG) 149100 (147250-210)

®

Page

Center jaw + Spindle for Makro•Grip® Profile Clamping 77, spindle length 175mm

37


33

Center jaw + Spindle for Makro•Grip® Profile Clamping 125, spindle length 315mm

37

149200 Makro•Grip® Profile Clamping Vise 125, length 310mm (147250-310) Center jaw + Spindle for Makro•Grip® Profile Clamping 125, spindle 149200-TG length 315mm 149251 Makro•Grip® Profile Clamping Base jaws 125 (147250) 149254 Add-on jaws for Makro•Grip® Dual Profile Clampint 125, Steel 149255 149256 (147256) 149257 (147257) 149771 (147770) 149774 149775 149776 (147776) 149777 (147777) 175600

86

33 37 50 37

Add-on jaws for Makro•Grip® Dual Profile Clampint 125, Aluminum

37

Add-on jaws for Makro•Grip® Profile Clamping 125, steel

33

Add-on jaws for Makro•Grip® Profile Clamping 125, aluminium

33

Makro•Grip® Profile Clamping Base jaws 77

50

Add-on jaws for Makro•Grip® Dual Profile Clampint 77, Steel

37

Add-on jaws for Makro•Grip® Dual Profile Clampint 77, Aluminum

37

Add-on jaws for Makro•Grip® Profile Clamping 77, steel

32

Add-on jaws for Makro•Grip® Profile Clamping 77, aluminium

32

Quick•Point® raster plate 52

62

Terms & Conditions

Quotes

• Quotes are valid for 30 Days unless otherwise specifically stated. • Quotations are conditional and are not binding.

Prices

• Prices are subject to change.

Images

• Images can vary from articles.

Ordering

• Minimum order value: net $50.00 • Any modifications to current orders must be in writing and are subject to pricing and manufacturing review.

Cancellation Policy

• Orders received and processed cannot be cancelled without the express written consent of Lang Technovation and are subject to manufacturing and material charges accrued up to the date of cancellation.

Shipping

• All shipping and insurance (if requested) is payable by the customer. • UPS ground standard unless otherwise requested FOB Hartland Wisconsin.

Payment Terms • • • • •

Net 30 Shipments to delinquent accounts (60 days past due) only per prepay. Additional freight costs could apply to special order items. Special order items are considered all items not shown in our current catalog. Special order delivery time average is approx. 12 weeks. Payments past our payment terms of Net 30 are subject to a 1.5% interest fee. Large orders are subject to a down payment, before orders are shipped.

Return Policy

• • • • • • •

Goods must be properly packaged and shipped prepaid for returns. Return of goods with reason of false ordering of customer is charged with a 10% of value restocking fee. Return of goods can only be accepted if reason is submitted before goods are returned within 4 weeks of receipt of shipment. Original shipping costs are still the responsibility of the customer if goods are returned. Custom order goods are not returnable. Goods which are not completely paid after due date remain property of Lang Technovation Co. and a return of goods can be requested. All returned goods are subject to Lang Technovation inspection and must be returned in new and unused condition. An additional 10% may be charged for any refurbishing and repackaging deemed necessary. Damaged or nonfunctional products are not returnable and will be returned to the customer at their request and expense.

Warranty

• All product warranties are valid for 12 months from date of delivery.

87

Grip•Fix

Makro•Grip®

Patented form-closure technology provides maximum clamping force

Center vise for 5-axis machining

Makro•Grip® Precision Vises

Quick•Point®

Ideal for finishing tasks of the 6th side

Highly precise and modular zero-point clamping system

LANG Technovation Co. Tel.: 262 446 9850 Fax: 262 446 9851 [email protected] www.lang-technovation.com