Manual. Installation equipment. For the installation of the interface you will need
tools ... Wiring Cabrio Comfort Interface Audi TT 8J Roadster/ Audi A3 Cabriolet ...
Version 1.01
Installation guide convertible top interface Audi TT 8J Roadster A3 Cabriolet
www.kufatec.de Kufatec GmbH • Dahlienstr. 15 • 23795 Bad Segeberg • Tel: +49(0)4551 80810-0 • Fax: +49(0)4551 80810- 50 • e-mail:
[email protected]
Convertible top interface • Convenient interior (one-Touch) operation - Control with the remote - Fully automated opening and closing. • Operate while driving up to the pace of 60 km/h (50 km/h to 60 km/h). • Indication of opening and closing convertible top by flashing indicators (optional).
Safety - Comfort - Operation • „Remote On“ + „Interior button Off“: Cancel of an already started operation (started by remote) by turning on/off the ignition. • „Remote Off“ + „Interior button On“: Cancel of an already started operation (started by interior button) by turning on/off the ignition. • „Remote On“ + „Interior button On“: Operation don‘t get affected by turning on/off the ignition. The already started operation will be completly finished. Furtheremore by using the interior button as well as turning off the ignition and leaving the car - the vehicle will lock automatically after closing the convertible top. • Keeping of all regular safty features. • Easy installation, no cutting of wirings necessary. • Usage of original connectors.
Scope of delivery • Cabrio Comfort Interface • Wiring • 2 X connector • Manual
Installation equipment For the installation of the interface you will need tools as follows: • Screwdriver (small) • Socket key 10 • Soldering station • Tape
Note - BEFORE Installation • Please disconnect the battery.
Note - AFTER Installation • Please delete errors in control unit for auto roof.
1
Specifications Interface Power supply Power input Standby current Dimensions in mm
- - - -
12Volt (8 - 15 Volt) 90 mA