JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN Jurnal 1 ...

JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN Jurnal 1.

2.

3.

4.

5. 6.

7. 8. 9.

10.

11.

12.

13.

14.

15. 16. 17.

18. 19.

20.

21. 22.

23.

24.

25.

W.I. Wan Ishak, R.M. Hudzari, S.M. Nasir, I. Napsiah & M.S. Abdul Rashid, 2011, Videogrammetry Application for Stereo Vision Bio-production Harvester. Trends in Applied Sciences Research 2011, Academic Journal Inc, Vol. 6 (5), p.p: 495-506. W W.I. Wan Ishak, Tan Ming Yin, R.M. Hudzari, 2011, Development of Control Program for Plant Growth Parameter Analysis in Lowland Tropical Greenhouse. Trends in Applied Sciences Research 2011, Academic Journal Inc, Vol. 11 (3), p.p: 592 – 598. Mohd. Hudzari Hj Razali, Hasbullah Hj Muhammad, Noordin Asimi Mohd & Wan Ishak Wan Ismail, 2011, A Review on Farm Mechanization and Analysis Aspect for Dioscorea Hispida. Journal of Crop Science, Bioinfo Publications, Vol. 2 (1), p.p: 21 – 26. Mohd. Hudzari Razali, Wan Ishak Wan Ismail, Abd. Rahman Ramli, Md. Nasir Sulaiman & Mohd. Haniff B. Haruni, 2011, Technique on Simulation for Real Time Oil Palm Fruits Maturity Prediction. African Journal of Agricultural Research, 2011 Academic Journals, Vol. 6 (7), p.p: 1823 – 1830, I.F. 0.263. Hamed Shokripour, Wan Ishak Wan Ismail & Zehra Moez Karimi, 2011, Development of an Automatic Self Balancing Control System for a Tree Climbing Robot, African Journal of Agricultural Research, Vol. 5(21), p.p: 2964-2971. Mohd Hudzari Razali, Wan Ishak Wan Ismail, Abd. Rahman Ramli Md Nasir Sulaiman & Mohd Haniff Harun, 2011, Prediction Model for Estimating Optimum Harvesting Time of Oil Palm Fresh Bunches, Journal of Food, Agriculture and Environment (JFAE), Vol. 9(3 & 4), p.p :570-575. Wan Ishak Wan Ismail, Mohd Hudzari Razali & Lam Wai Yip, 2011, Determination of the Optimum Frequency for Elaeis Guineensis Jacq. Detachment, African Journal of Agricultural Research, Vol. 6(25), p.p: 5656-5663. Wan Ishak Wan Ismail & M.H Razali, 2011, Gantry System for Urban Crop Production, Engineering e-Transaction, Vol. 6(2), p.p: 76-80. Hamidreza Salemi, Mohd. Amin Mohd. Soom, Teang Shui Lee, Mohd Kamil Yusoff & Desa Ahmad, 2011, Effect of Deficit Irrigation on Water Productivity and Maize Yields in Arid Regions of Iran. Pertanika Journal of Tropical Agricultural Science, Vol. 34 (2), p.p: 207 – 216. Mastura M., Amin M. S. M. & Aimrun W., 2011, Characterization of Paddy Soil Compaction Based on Soil Apparent Electrical Conductivity Zones, African Journal of Agricultural Research, 2011 Academic Journals, Vol. 6 (11), p.p: 2506 – 2515, I.F. 0.263. Asa Gholizadeh, Mohd Amin Mohd Soom, Abdul Rahman Anuar & Wayayok Aimrun, 2011, Relationship between Apparent Electrical Conductivity & Soil Physical Properties in a Malaysian Paddy Field, Archive of Agronomy and Soil Science, p.p: 1 -4. Gholizadeh, A, Amin, M. S. M., Anuar, A. R., Aimrun, W., 2011, Apparent Electrical Conductivity in Correspondence to Soil Chemical and Plant utrients in Soil, Communication in Soil Science and Plant Analysis, Vol. 42 (12), p.p : 1447 - 1461, I.F. 0.435. Gholizadeh, A, Amin, M. S. M., Anuar, A. R., Aimrun, W., 2011, Using SPAD Chlorophyll Meter for two Growth Stages to assess Grain Yield of Malaysian Rice (Oryza Sativa), American Journal of Agricultural and Biological Sciences, Vol. 6 (2), p.p: 209 - 213. Asa Gholizadeh, Mohd Amin Mohd Soom, Anuar Abd. Rahim & Wayayok Aimrun, 2011, Using Soil Plant Analysis Development Chlorophyll Meter for Two Growth Stages to Assess Grain Yield of Malaysian Rice (Oryza Sativa), American Journal of Agricultural and Biological Sciences, Vol. 6 (2), p.p: 209 – 213. O. Gharaei, D. Ahmad, A. Khalina, H. Suryanto, J. Othman, 2011, Cutting Test of Kenaf Stems, Transactions of the ASABE, 2011 American Society of Agricultural & Biological Engineers, Vol. 54 (1), p.p: 51 - 56, I.F. 0.822. Mohammed Shu'aibu Abubakar, Desa Ahmad, Othman Jamarei, 2011, Evaluation of a Dual-Purpose Chemical Applicator for Paddy Fields, American Journal of Applied Sciences, 2011 Sciences Publications, Vol. 8 (4), p.p: 362 – 367. Afshin Keshvadi, Johari Bin Endan, Haniff Harun, Desa Ahmad & Farah Saleena, 2011, The Relationship between Palm Oil Quality Index Development and Physical Properties of Fresh Fruit Bunches in the Ripening Process, Advance Journal of Food Science and Technology, Maxwell Scientifix Organization, 2011, Vol. 3 (1), p.p: 50 – 68. Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahmad, Gholum Hossein Mazjoobi, 2011, The Design Process of a Self-propelled Floor Crane, Journal of Terramechanics (ScienceDirect - Elsevier), Vol. 48, p.p: 157 – 168, I.F. 0.565. Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahmad, Gholum Hossein Mazjoobi, 2011, An Investigation into the Hook Dynamics and Effect of Hook Parameters on the Sway Angles in Hydraulic Cranes, Scientific Research and Essays, Vol. 6 (6), p.p: 1303 – 1316, I.F. 0.445. M. R Bakhtiari, D. Ahmad, J. Othman, N. Ismail, 2011, Physical and Mechanical Properties of Kenaf Seed, Applied Engineering in Agriculture, 2011 American Society of Agricultural & Biological Engineers, Vol. 27 (2), p.p: 263 – 268, I.F. 0.507. Helena Anusia James Jayaselan, Desa Ahmad, 2011, Development of A Mechanization Selection System for Oil Palm Plantations Alternative Planting Patterns, Journal of Oil Palm Research, Vol. 23, p.p: 990 – 998, I.F. 0.148. Afshin Keshvadi, Johari Bin Endan, Haniff Harun, Desa Ahmad & Farah Saleena, 2011, The Relationship Between Palm Oil Index Development and Mechanical Properties in the Ripening Process of Tenera Variety Fresh Fruit Bunches, Research Journal of Applied Sciences, Engineering and Technology, Vol. 3 (3), p.p: 2180 – 226. Afshin Keshvadi, Johari Bin Endan, Haniff Harun, Desa Ahmad & Farah Saleena, 2011, Palm Oil Quality Monitoring in the Ripening Process of Fresh Fruit Bunches, International Journal of Advanced Engineering Sciences and Technologies (IJAEST), Vol. 4 (1), p.p: 26 – 52. Afshin Keshvadi, Johari Bin Endan, Haniff Harun, Desa Ahmad & Farah Saleena, 2011, The Effect of High Temperature on Viscosity of Palm Oil During the Ripening Process of Fresh Fruits, International Journal of Scientific & Engineering Research, Vol. 2 (6), p.p: 1-7. M.M. Davoodi, S.M. Sapuan, D. Ahmad, A. Aidy, A. Khalina, Mehdi Jonoobi, 2011, Concept Selection of Car Bumper Beam with Developed Hybrid Bio-Composite Material, International Material and Design, Vol. 32, p.p: 4857-4865, I.F. 1.694.

26. M.M. Davoodi, S.M. Sapuan, D. Ahmad, A. Aidy, A. Khalina, Mehdi Jonoobi, 2011, Effect of Polybutylene Terephthalate (PBT) on Impact Property Improvement of Hybrid kenaf/Glass Epoxy Composite, Materials Letter (Elsevier), Vol. 67, p.p: 5-7, I.F. 2.12. 27. Akande, F.B., Ahmad, D., Sulaiman, S., Fashina, A.B., 2011, Present State of Research on Narrow Wheels: A Prerequisite for Traction Studies on Non-Lug Narrow Wheels, Leonardo Electronic Journal of Practices and Technologies, Vol. 10 (10), p.p: 65-78. 28. Afshin Keshvadi, Johari Bin Endan, Haniff Harun, Desa Ahmad & Farah Saleena, 2011, The Effect of Surface Color on Palm Oil Quality during the Ripening Process of Fresh Fruits, Journal of Food, Agriculture & Environment, Vol. 9 (3&4), p.p: 61-67, I.F 0.425. 29. Y.Y. Kin, S.S. Jamuar, A. Yahya, 2011, Combine Harvester Instrumentation System for use in Precision Agriculture, Instrumentation Science and Technology, Vol. 39, p.p: 347-393, I.F 0.448. 30. T.A., Ishola, K.C. Oni., A. Yahya and M.S. Abubakar, 2011, Development and Testing of a Prosopis Africana Pod Thresher, Australian Journal of Basic and Applied Sciences, Vol. 5 (5), p.p: 759-767. 31. I. S. Aji, E.S. Zainudin, A. Khalina, S. M. Sapuan & M.D. Khairul, 2011, Studying the Effect of Fiber Size and Fiber Loading on the Mechanical Properties of Hybridized Kenaf/PALF- reinforced HDPE Composite, Journal of Reinforced Plastics and Composites, Vol. 30 (6), p.p: 546-553, I.F. 0.823. 32. Aidy Ali, Z. R. Shaker, A. Khalina & S. M. Sapuan, 2011, Development of Anti-Ballistic Board from Ramie Fiber, PolymerPlastics Technology and Engineering, Vol. 50 (6), p.p 622-634, I.F. 0.557. 33. S. A. Ibraheem, Aidy Ali & A. Khalina, 2011, Development of Green Insulation Boards from Kenaf Fibers & Polyurethane, Polymer-Plastics Technology and Engineering, Vol. 50 (6), p.p 613-621, I.F. 0.557. 34. Riza Wirawan, S. M. Sapuan, Yunus Robish & Khalina Abdan, 2011, Elastic and Viscoelastic Properties of Sugarcane Bagasse-Filled Poly(Vinyl Chloride) Composite, Journal of Thermal Analysis and Calorimetry, Vol. 103 (3), p.p 1047-1053, I.F. 1.752. 35. Zainab Shakir Radeef, Aidy Ali & Khalina Abdan, 2011, Development of a Green Combat Armour from Rame-KevlarPolyester Composite, Pertanika Journal of Science and Technology, Vol. 19 (2), p.p 339-348. 36. A. H. Abdullah, A. Khalina & Aidy Ali, 2011, Effect of Fiber Volume Fraction on Unidirectional Kenaf/Epoxy Composites: The Transition Region, Polymer-Plastics Technology and Engineering, Vol. 50 (13), p.p 1362-1366, I.F. 0.557. 37. I. S. Aji E.S.Zainuddin A.Khalina and S.M. Sapuan, Khairulzaman MD, 2011, Electron beam cross-linking of hybridized kenaf/pineapple leaf fiber-reinforced high-density polyethylene composite with and without cross-linking agents, Journal of Reinforced Plastics and Composites, vol. 30, no. 21, p.p 1827-1838. 38. Riza Wirawan, S.M. Sapuan, Robiah Yunus, Khalina Abdan, 2011, The Effects of Thermal History on Tensile Properties of Poly (vinyl chloride) and its Composite with Sugarcane Bagasse, Journal of Thermoplastic Composite Materials, Vol. 24, Issue 4, p.p 567-579. 39. Riza Wirawan, S.M. Sapuan, Robiah Yunus, Khalina Abdan, 2011, Properties of sugarcane bagasse/poly (vinyl chloride) composites after various treatments, Journal of Composite Materials, vol. 45, Issue 16, p.p 1667–1674. 40. Paridah Md. Tahir Edi Suhaimi Bakar Khalina Abdan Adrian Cheng Yong Choo, Alinaghi Karimi Azmi Ibrahim, Loh Yueh Feng, 2011, Density and humidity gradients in veneers of oil palm stems, European Journal of Wood and Wood Products, vol. 69(3), p.p 501-504. 41. Hng Paik San , Paridah Md. Tahir , A.N. Lee, C.M. Hang, S.H. Lee Khalina A, 2011, Biological Durability of Injection Moulded Wood Plastic Composite, Boards Journal of Applied Sciences, vol. 11(2), p.p 384-388. 42. A.R.Rahman, S.M Sapuan, M.Shahjahan and K. Abdan 2011, Effects of process parameters on selected properties of liquid compression-moulded vinyl ester sheets, Pertanika Journal of Science and Technology, vol. 19 (1), p.p 147-152. 43. K. Abdan, E.S. Zainudin, A.R. Mohd. Faizal, H. Jalaluddin, A.H. Umar & W.N.W.N Syuhada, 2011, Development of Biocomposite Wall Cladding from Kenaf Fibre by Extrusion Molding Process, Key Engineering Material, Vols. 471-472 (2011), pp 239-244. 44. Agnes surai lasat, A. Khalina, N.A.Ibrahim, Kenaf Nanofiber/Polylactic Acid (PLA) Nanocomposite, Key Engineering Material, Vols. 471-472 (2011), pp 1095-1100. 45. Zahra Dashtizadeh, Aidy Ali, A.Khalina, A Review of Non-Destructive Thermography Techniques Toward Structural Integrity of Bio-Composites, Key Engineering Material, Vols. 471-472, p.p 103. 46. Nor Azowa Ibrahim, Wan Md Zin Wan Yunus, Maizatul Othman & Khalina Abdan, 2011, Effect of chemical surface treatment on the mechanical properties of reinforced plasticized poly(lactic acid) biodegradable composites, Journal of Reinforced Plastics and Composites, vol. 30(5), pp 381–388. 47. Y. A. El-Shekeil1, S.M. Sapuan, E.S. Zainudin, Khalina Abdan, 2011, Optimizing Processing Parameters and Fiber Size for Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite, Key Engineering Material, Vol. 471-472, pp 297-302 . 48. W.H. Haniffah, A. Khalina & S.M. Sapuan, 2011, Water Retention in Kenaf/Polypropylene Composites due to Repeated Immersion and Drying Conditions, Key Engineering Material, 471-472 (2011) pp 438-443. 49. A.Khalina, E.S.Zainuddin & I. S. Aji, 2011, Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size, Key Engineering Material, Vols. 471-472 (2011), pp 513-517. 50. I. S. Aji E.S.Zainuddin, A.Khalina & S.M. Sapuan, 2011, Optimizing Processing Parameters for Hybridized Kenaf/PALF Reinforced HDPE Composite, Key Engineering Material, Vol. 471-472 (2011), pp 674-679. 51. I. S. Aji E.S.Zainuddin, A.Khalina & S.M. Sapuan, 2011, Effect of Fibre Size and Fibre Loading on Tensile Properties of Hybridized Kenaf/PALF Reinforced HDPE Composite, Key Engineering Material Vols. 471-472 (2011), pp 680-685. 52. S.M.A. Tawakkal, R.A. Talib, A. Khalina, 2011, The Influence of Mercerised Kenaf Fibres Reinforced Polylactic Acid Composites on Dynamic Mechanical Analysis, Key Engineering Material, Vol. 471-472 (2011), pp 815-820. 53. Hermaen AS, H. Jalaluddin, PM Tahir and K. Abdan, 2011, Feasibility of Manufacturing a Medium Density Fibreboard Made of 4-Year Old Rubber Tree RRIM 2020 Clone, Key Engineering Material, Vol. 471-472 (2011) pp 839-844 54. Alyani Ismail, Khalina Abdan. & Adzir Mahadi, 2011, Investigation on the Microwave Properties of Kenaf and Rice-Husk Fiber Reinforced Plan Composite Utilizing One-Port Coaxial Transmission Line Reflection Method, Key Engineering Material, Vol. 471-472 (2011), pp 868-873. 55. Y. A. El-Shekeil, S.M. Sapuan, E.S. Zainudin2, Khalina Abdan, 2011, Effect of Fiber Loading on the Mechanical Properties of Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite, Key Engineering Material, Vol. 471-472 (2011), pp 1058-1063. 56. A. Khalina, Aidy Ali, H. Jalaluddin, M. Z. Hasniza, W. H. W. M. Haniffah, M. Y. Yusri and M. G. Shuriati, 2011, Feasibility study of natural fiber reinforced plastic composite processed by injection molding technique, Materials Testing 2010, vol. 53 (2011), pp 229.

57. M. J. Suriani, Aidy Ali, S. M. Sapuan, and A. Khalina, 2011, Non-Destructive Techniques (NDT) in Composite Materials, Key Engineering Material, Vol. 462-463 (2011), pp 918-924. 58. K. S. Hasnah, A. Khalina, Aidy Ali, S. Jamaliah, 2011, The Effect of Eva on Composite that Made of PP Nanoclay, Key Engineering Material, Vol. 462-463 (2011), pp 925-930. 59. S. A. Ibraheem, Aidy Ali, A.Khalina, 2011, Development of Green Insulation Boards from Kenaf Fibres Part 2: Characterizations of Thermal and Water Absorption, Key Engineering Material, Vol. 462-463 (2011), pp 1331-1336. 60. D S. A. Ibraheem, Aidy Ali, A.Khalina, 2011, Development of Green Insulation Boards from Kenaf Fibres Part 1: Development and Characterization of Mechanical Properties, Key Engineering Material, Vol. 462-463 (2011), pp 13431348. 61. Nazlina Haiza Mohd Yasin, Nor'Aini Abd Rahman, Hasfalina Che Man, Mohd Zulkhairi Mohd Yusoff, Mohd Ali Hassan, 2011, Microbial Characterization of Hydrogen-Producing Bacteria in Fermented Food Waste at Different pH Values, International Journal of Hydrogen Energy (ScienceDirect-Elsevier), Vol. 36, p.p 9571-9580, I.F. 4.053. 62. Mahirah Jahari, S. Khairunniza-Bejo, Abdul Rashid Mohamed Shariff, Helmi Zulhaidi Mohd. Shafri, 2011, Change Detections Studies in Matang Mangrove Forest Area, Perak, Pertanika Journal of Science and Technology, Vol. 19 (2), p.p 307-327. 63. N. Hafizah Sumgap, S. Khairunniza-Bejo, 2011, Color Spaces for Paddy Soil Moisture Content Determination, Journal of Tropical Agriculture and Food Science, Vol. 39 (1), p.p 103-115. 64. Siti Khairunniza-Bejo, Abdul Rashid Mohamed Shariff, 2011, Historical Analysis of the Land Movement in landslide Area Using Elastic Image Registration and Condition Statement Approach, International Journal of Multimedia and Ubiquitous Engineering, Vol. 6 (3), p.p 37-48. 65. Rahmat Fadhil, Johari Endan, Farah S. Taip & Muhammad S. b. Hj. Ja'afar, 2011, Biological Performance of Asian Catfish (Clarias Batrachus) (Teleostei, Clariidae) Cultured in Recirculating Aquaculture System, Aquaculture, Aquarium, Conservation & Legislation International Journal of the Bioflux Society, Vol. 4 (5), p.p 684-689. 66. Rahmat Fadhil, Johari Endan, Farah S. Taip & Muhammad S. b. Hj. Ja'afar, 2011, Steer-by-switch System Design for Vehicles, Scientific Research and Essays, Vol. 6 (31), p.p 6412-6427, I.F. 0.445. 67. Fatai B. Akande, Desa Ahmad, Othman Jamarei, Samsuddin Sulaiman, Adepoju B. Fashina, Hossein Shamsabadi, 2011, Investigative Studies on the Effect of Tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard and Deformable Surface, Tarim Makinalari Bilimi Dergisi (Journal of Agricultural Machinery Science), Vol. 7 (3), p.p 317-323. 68. Hossein T. Shamsabadi, Desa Ahmad, & Wayayok Aimrun, 2011, Yield and Yield Components of Sweet Corn (Zea Mays L.) Grown under Different Tillage Methods, Tarim Makinalari Bilimi Dergisi (Journal of Agricultural Machinery Science), Vol. 7 (3), p.p 259-264. 69. A. Rahman, AK.M. Modhiuddin, A. Hossain, A.F. Ismail and A. Yahya, 2011, Integrated Mechanics of Hybrid Electrical Air-cushion Tracked Vehicle for Swamp Peat, International Journal of Heavy Vehicles Systems, Vol. 18 (3), p.p 227-244. 70. M.H. Ghassemi, A. Yahya and S. A. Aziz, 2011, A Track Type Oil Palm Fresh Fruit Bunch In-Field Transportation for Low Bearing Capacity Peat Terrain, Journal of Agricultural Machinery Science, Vol. 7 (1), p.p 7-12. 71. S.E. Roodi, A. Yahya and S. A. Aziz, 2011, A Track Type Oil Palm Fresh Fruit Bunch In-Field Transportation for Low Bearing Capacity Peat Terrain, Journal of Agricultural Machinery Science, Vol. 7 (2), p.p 185-190. 72. I. S. Aji E.S.Zainuddin A.Khalina and S.M. Sapuan Thermal property determination of hybridized kenaf/palf reinforced HDPE composite by thermogravimetric analysis Journal of Thermal Analysis and Calorimetry p.p 1-8 Prosiding 1.

Amir Fadzli Abd Ghani, A. Ssomad M.A. Halim, Mohd. Hudzari hj Razali, Noordin Asimi Mohd, Wan Ishak Wan Ismail & Mohd. Sapuan Salit. The Concept of Simulation Analysis for innovative Hand Tool Harvester in proceeding of the International Conference on Mechanical, Automotive & Aerospace Engineering 2011, Legend Hotel, Kuala Lumpur. 2. Mohd. Hudzari hj Razali, Wan Ishak Wan Ismail, Mohd. Haniff Harun, Abd. Rahman Ramli & Md. Nasir Sulaiman. Computational Image Analysis for Determination of the Oil Palm Fruit Maturity in proceeding of the IASTED International Conference on Computational Photography 2011, Vancouver, BC, Canada. 3. Mohd. Hudzari, Wan Ishak, Mat Zakaria & Hasbullah. The Novelty in Crop Maturity Prediction Device and Application: Book of Abstract in proceeding of International Innovation and Invention Exhibition (InEx) 2011, Kuantan, Pahang. 4. Mohd. Hudzari, MAHA Ssomad, MNA Nordin, Hasbullah, R Syazili, Wan Ishak & SM Sapuan. Innovative Hand Tool Harvester for Dioscorea Hispida in proceeding of International Innovation and Invention Exhibition (InEx) 2011, Kuantan, Pahang. 5. Wan Ishak Wan Ismail, Nader Kavandi & Mohd Hudzari Razali. Technology Transfer: PDA Handphone for Agricultural Sector Applications in proceeding of International Engineering Conference 2011, Madinah, Kingdom of Saudi Arabia. 6. M. S. Abubakar, D. Ahmad, O. Jamarei, S. Samsuddin & M. Norhisam. Evaluation of a Dual-Purpose Chemical Applicator for Paddy Field in proceeding of the 4th International Conference on Mechatronics (ICOM) 2011, Kuala Lumpur. 7. D. Ahmad. Status of Research on Kenaf Mechanization at universiti Putra Malaysia in proceeding of the International Seminar on Jute, Kenaf & Allied Fibers 2011, International Jute Study Group, Dhaka, Bangladesh. 8. F.B. Akande, D. Ahmad, S. Sulaiman, O.B. Jamarie & A.B. Fashina. Modelling the Motion Resistance of a Pneumatic Bicycle Wheel in proceeding of International Soil Tillage Reseacrh Organisation (ISTRO) 2011, University Auditorium, University of Ilorin, Kwara State, Nigeria. 9. Hossein T. Shamsabadi, Desa Ahmad, Wayayok Aimrun. Yield & Yield Components of Sweet Corn (Zea Mays L.) Grown under Different Tillage Methods in proceeding of 11th International Congress on Mechanization and Energy in Agriculture 2011, Istanbul, Turkey. 10. Fatai B. Akande, Desa Ahmad, Othman Jamarei, Samsuddin Sulaiman, Adepoju B. Fashina, Hossein Shamsabadi. Investigative Studies on the Effect of Tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard & Deformable Surface in proceeding of 11th International Congress on Mechanization and Energy in Agriculture 2011, Istanbul, Turkey. 11. A Hashemi, D Ahmad, J Othman & S Sulaiman. Design, Development and Performance of a Disk Plow Combined with Rotary Blades in proceeding of 1st International Conference in Mechanical Engineering Research (ICMER) 2011, MS Garden Hotel, Kuantan, Pahang.

12. A Hashemi, D Ahmad, J Othman & S Sulaiman. Design and Development of an Integrated slasher (Pulverizer) for Sweet Potato Harvester: A Review in proceeding of 1st International Conference in Mechanical Engineering Research (ICMER) 2011, MS Garden Hotel, Kuantan, Pahang. 13. M.H. Ghassemi, A. Yahya, & A. Rahman. A Track Type Oil Palm Fruit Bunch In-Field Transporter for Low Capacity Peat Terrain in proceeding of 11th International Congress on Mechanization and Energy in Agriculture 2011, Istanbul, Turkey. 14. S.E. Roodi, A. Yahya & S. A. Aziz. Field Performance of a Single Chassis Integrated Machine System in Planting Palm Oil Seedlings in proceeding of 11th International Congress on Mechanization and Energy in Agriculture 2011, Istanbul, Turkey. 15. D.E. Pebrian, A. Yahya, N.M Nawi and A.M. Monitoring and Auditing Human Energy Inputs in the Cultivations of Oil Palm and Rice in Malaysia in proceeding of 11th International Congress on Mechanization and Energy in Agriculture 2011, Istanbul, Turkey. 16. S. Khairunniza-Bejo & Syahidah Kamarudin. Chokanan Mango Sweetness Determination using HSB Color Space in proceeding of the Proceeding of the 3rd International Conference on Computational Intelligence, Modelling and Simulation 2011, Sheraton Hotel, Langkawi. 17. Nazren R., Khalina A., Alyani I., Rimfiel J. Variation in moisture content behaviour and microwave dielectric constant property of kenaf components in the Proceeding of International Seminar on Application of Science and Mathematics, PWTC 1-3 November 2011. 18. Y. A. El-Shekeil, S. M. Sapuan, K. Abden and E.S. Zainudin. Effect of Alkali Treatment and PMDI Isocyanate Additive on Tensile Properties of Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite in the Proceeding of International Conference on Advanced Materials Engineering (ICAME 2011). Buku 1. 2.

Hasfalina Che Man, 2011. Insight into Enhanced Biological Phosphorus Removal (EBPR) System: EBPR procss, mechanism and microbiology. LAMBERT Academic Publishing (LAP), Germany. No ISBN: 978-3-8433-8104-8. Ataur Rahman, Rafia Azroz & Azmi Yahya, 2011. The Peat Swamp: Productivity, Trafficability & Mechanization. Nova Science Publisher, Inc., New York. No ISBN: 978-1-61942-670-2.

Majalah 1.

Darius El Pebrian & Azmi Yahya, 2011. Mechanised Weed Control Applicator for Mature Oil Palm, The Planter, Kuala Lumpur, 87 (1019): 85-100 (2011).