ISO/FDIS 8494 *. Metallic materials — Tube —. Flanging test. 2013-09-28. (
Revision of ISO 8494:1998). ISO/FDIS 8495 *. Metallic materials — Tube —.
ISO Update
Supplement to ISO Focus+ July 2013
International Standards in process ISO/CD 9454-1 An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered Period from 01 June to 30 June 2013 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat.
Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging
TC 58
Gas cylinders
ISO/DTR 17329
List of codes and identification marks for gas cylinder manufacturers
TC 61
Plastics
ISO/CD 13802
Plastics — Verification of pendulum impacttesting machines — Charpy, Izod and tensile impact-testing
TC 70
Internal combustion engines
ISO/CD 7967-10
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 10: Ignition systems
ISO/CD 7967-11
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11: Fuel systems
ISO/CD 7967-12
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emission control systems
TC 84
Devices for administration of medicinal products and intravascular catheters
ISO/DTR 19244
Guidance on ISO Transition Periods — At the Publication of New/Updated Device Standards
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 16900-7
Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test method
ISO/DTS 16976-6
Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects
TC 20
Aircraft and space vehicles
ISO/CD 18147
Space environment (natural and artificial) — The method of the solar energetic protons fluences and peak fluxes determination
TC 21
Equipment for fire protection and fire fighting
TC 100
ISO/CD 7240-12
Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam
Chains and chain sprockets for power transmission and conveyors
ISO/CD 606
ISO/CD 7240-15
Fire detection and alarm systems — Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
ISO/CD 4347
Leaf chains, clevises and sheaves — Dimensions, measuring forces and tensile strengths
ISO/CD 7240-28
Fire detection and alarm systems — Part 28: Fire protection control equipment
ISO/CD 15654
Fatigue test method for transmission precision roller chains
TC 29
Small tools
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD TS 13399-309
Cutting tool data representation and exchange — Part 309: Concept for the design of 3D models based on properties according to ISO/ TS 13399-3: Tool holders for indexable inserts
ISO/CD 18129
Condition monitoring and diagnostics of machines — Approaches for performance diagnosis
TC 34
Food products
TC 111
ISO/CD 12966-4
Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Capillary gas chromatographic method
Round steel link chains, chain slings, components and accessories
ISO/CD 16872
TC 38
Textiles
Short link chains for lifting purposes — Grade VH, fine tolerance for manually operated chain hoists
ISO/CD 17299-4
Textiles — Determination of deodorant property — Part 4: Condensation sampling analysis
ISO/CD 16877
Short link chains for lifting purposes — Grade TH, fine tolerance for manually operated chain hoists
ISO/CD 17608
Textiles — Determination of elastane fibre resistance to chlorinated water (swimming-pool water)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 12947-2
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
ISO/CD 13951
Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
TC 44
Welding and allied processes
ISO/CD 17778
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
TC 145
Graphical symbols
ISO Update, Supplement to ISO Focus -- July 2013
1
ISO/CD 28564-2
Public information guidance systems — Part 2: Design principles and requirements for location signs and direction signs
TC 150
Implants for surgery
ISO/DTS 17137-1
Cardiovascular absorbable implants — Part 1:
ISO/CD 27186
Active implantable medical devices — Fourpole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements
TC 159
Ergonomics
ISO/DTS 20646-1
Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads
TC 163
Thermal performance and energy use in the built environment
ISO/CD 16956
Thermal Performance in the Built Environment — Determination of Air Flow Rate in Building Applications by Field Measuring Methods
TC 171
Document management applications
ISO/CD 18565
Document management — AFP/Archive
TC 172
Optics and photonics
ISO/CD 14880-1
Optics and photonics — Microlens arrays — Part 1: Vocabulary
TC 176
Quality management and quality assurance
ISO/CD 9000
Quality management systems — Fundamentals and vocabulary
ISO/CD 9001
Quality management systems — Requirements
TC 192
Gas turbines
ISO 21789:2009/ CD Amd 1
TC 194
ISO/CD 17861
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral transmittance of fine ceramics thin films under humid condition
TC 215
Health informatics
ISO/DTS 16277-1
Health Informatics — Categorial structures of clinical findings in traditional medicine — Part 1: Traditional Chinese, Japanese and Korean medicine
ISO/CD 17090-4
Health informatics — Public key infrastructure — Part 4: Digital Signatures for healthcare documents
ISO/DTR 17522
Health informatics — Provisions for Health Applications on Mobile/Smart Devices
ISO/CD 17523
Health informatics — Requirements for electronic prescriptions
TC 217
Cosmetics
ISO/DTR 17276
Cosmetics — Analytical approach for screening and quantification methods for heavy metlas in cosmetics
TC 228
Tourism and related services
ISO/CD 17679
Wellness spa — Service requirements
TC 238
Solid biofuels
ISO/CD 18846
Solid biofuels — Determination of fines content in quantities of pellets — Manual sieve method using 3,15 mm sieve aperture
TC 262
Risk management
ISO/DTR 31004
Risk management — Guidance for the implementation of ISO 31000
TC 268
Sustainable development in communities
Gas turbine applications — Safety — Amendment 1
ISO/DTR 37150
Review of works relevant to smart community infrastructure metrics and future directions of standardization
Biological evaluation of medical devices
JTC 1
Information technology
ISO/IEC/IEEE CD 23026
Software Engineering — Recommended Practice for the Internet — Web Site Engineering, Web Site Management, and Web Site Life Cycle
ISO/IEC CD 26531
Content management for product life-cycle, user and service management documentation
ISO/IEC CD 30105-1
IT Enabled Services / Business Process Outsourcing Lifecycle Processes ITESBPO Standard — Part 1: Process Reference Model
ISO/CD 10993-6
Biological evaluation of medical devices — Part 6: Tests for local effects after implantation
ISO/CD TR 17137-2
Cardiovascular implants and extracorporeal systems — Cardiovascular absorbable implants — Part 2: Guidance on biological evaluation of absorbable implants
TC 195
Building construction machinery and equipment
ISO/CD 13105-1
Building construction machinery and equipment — Concrete floating machines (power trowels) — Part 1: Terminology
ISO/IEC CD 18033-5
Information technology — Security techniques — Encryption algorithms — Part 5: Identitybased ciphers
ISO/CD 13105-2
Building construction machinery and equipment — Concrete floating machines (power trowels) — Part 2: Safety
ISO/IEC CD 27018
Code of practice for data protection controls for public cloud computing services
ISO/CD 17740-1
Building construction machinery and equipment — Concrete placing system — Part 1: Terminology and commercial specifications
ISO/IEC PDTR 18120
e-Textbook
TC 204
Intelligent transport systems
ISO/IEC 19794-9:2011/ PDAM 2
Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 2: XML Encoding
ISO/DTR 17465-1
Intelligent transport systems — Cooperative ITS — Part 1: Terms and definitions
ISO/DTR 17465-2
Intelligent transport systems — Cooperative ITS — Part 2: Guidelines for standards documents
ISO/IEC 19795-2:2007/ PDAM 1
Information technology — Biometric performance testing and reporting — Part 2: Testing methodologies for technology and scenario evaluation — Amendment 1: Testing of multimodal biometric implementations
ISO/DTR 17465-3
Intelligent transport systems — Cooperative ITS — Part 3: Release procedures for standards documents
ISO/IEC CD 24779-4
TC 206
Fine ceramics
Information Technology - Crossjurisdictional and societal aspects of implementation of biometric technologies - Pictograms, Icons and Symbols for use with Biometric Systems — Part 4: Face
ISO/CD 17860
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of drying loss of ceramic granules
ISO/IEC PDTR 29194
Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems
2
ISO Update, Supplement to ISO Focus -- July 2013
ISO/IEC CD 29794-1
Information technology — Biometric sample quality — Part 1: Framework
ISO/DIS 16349.2
*
TC 37
ISO/DIS 24617-4
DIS circulated
ISO/DIS 17100
Period from 01 June to 30 June 2013
Refractory materials — Determination of abrasion resistance at elevated temperature
Terminology and other language and content resources *
*
Language resource management — Semantic annotation framework (SemAF) — Part 4: Semantic roles (SemAF-SR)
2013-11-21
They have been submitted to the ISO member bodies for voting by the date shown.
TC 44
* Available in English only
ISO 11745:2010/ DAmd 1
*
ISO/DIS 17643
*
TC 6 ISO/DIS 2469.2
Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
TC 22 ISO/DIS 17215-1
ISO/DIS 17215-2
ISO/DIS 17215-3
ISO/DIS 17215-4
ISO/DIS 19072-1
*
*
*
*
*
TC 23 ISO/DIS 16399.2
Aircraft ground equipment — Basic requirements — Part 2: Safety requirements (Revision of ISO 6966-2:2005)
TC 61
Road vehicles
ISO/DIS 12856-1.2
Road vehicles — Video communication interface for cameras (VCIC) — Part 1: General information and use case definition Road vehicles — Video communication interface for cameras (VCIC) — Part 2: Service discovery and control Road vehicles — Video communication interface for cameras (VCIC) — Part 3: Camera message dictionary Road vehicles — Video communication interface for cameras (VCIC) — Part 4: Implementation of communication requirements Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition (Revision of ISO 19072-1:2007)
*
*
2013-09-05
TC 72 2013-09-05
2013-09-05
2013-09-05
2013-09-11
ISO/DIS 23771
*
TC 85
ISO/ASTM DIS 51401
Refractories
ISO Update, Supplement to ISO Focus -- July 2013
Draft on sustainability in buildings and civil engineering works - Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works
2013-08-13
Plastics - Plastic railway sleepers for railway applications (railroad ties) — Part 1: Material characteristics
2013-08-14
Textile machinery and accessories Design measures for reduction of the noise emissions from textile machinery
2013-11-07
Nuclear energy, nuclear technologies, and radiological protection *
Practice for use of a dichromate dosimetry system 2013-09-13 (Revision of ISO/ASTM 51401:2003)
ISO/DIS 16641
*
Meters for irrigation water
(Revision of ISO/CD 16399-2, ISO/CD 16399-3)
2013-11-21
Plastics
Tractors and machinery for agriculture and forestry *
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
2013-09-04
Buildings and civil engineering works
2013-09-14
2013-08-26
TC 33
TC 59 ISO/DIS 21929-2.2
Aircraft and space vehicles *
Brazing for aerospace applications — Qualification test for brazers and brazing operators — Brazing of metallic components — Amendment 1
(Revision of ISO 17643:2005) 2013-08-25
(Revision of ISO 2469:2007)
TC 20 ISO/DIS 6966-2
Welding and allied processes
Paper, board and pulps *
2013-09-08
Translation Services — Requirements for translation services
These documents have obtained substantial support within the appropriate ISO technical committee.
Vote terminates
2013-08-29
TC 94
ISO/DIS 16900-9
Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
2013-09-25
Personal safety -- Protective clothing and equipment *
Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of the carbon dioxide content of inhaled air
2013-09-13
3
TC 110 ISO/DIS 5053-1
Industrial trucks *
Powered industrial trucks — Terminology and classification — Part 1: Types of industrial trucks
ISO/DIS 17469-1 2013-09-29
*
TC 178
ISO/DIS 18490
Non-destructive testing *
TC 138
ISO/DIS 17484-1.2
*
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems (Revision of ISO 17484-1:2006, ISO 17484-1:2006/Cor 1:2008)
*
In situ test methods for very high efficiency filter systems in industrial facilities
ISO/DIS 25745-3
Water safety signs and beach safety flags — Part 3: Guidance for use
*
TC 201 2013-08-15
ISO/DIS 17862
ISO/DIS 10318-1
ISO/DIS 17289
ISO/DIS 16778
ISO/DIS 17244
ISO/DIS 16540
*
*
*
TC 171
4
Water quality — Determination of dissolved oxygen — Optical sensor method Water quality — Calanoid copepod development test with Acartia tonsa Water quality — Bio-indicator of potential toxicity in aqueous media — Determination of the potential toxicity of aqueous samples on bivalve embryolarval development
*
*
Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests (Revision of ISO 7441:1984) Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
*
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Volumetric pumps (Revision of ISO 6145-2:2001)
Document management applications
2013-09-19
Geosynthetics — Part 1: Terms and definitions (Revision of ISO 10318:2005)
2013-11-28 ISO/DIS 10318-2
*
Geosynthetics — Part 2: Symbols and Pictograms 2013-11-14
2013-09-25
(Revision of ISO 10318:2005) ISO/DIS 13427
*
Geosynthetics — Abrasion damage simulation (sliding block test) 2013-11-14 (Revision of ISO 13427:1998)
2013-09-04
2013-09-26
TC 223 ISO/DIS 22324
Societal security *
TC 242 ISO/DIS 50002
Societal security - Emergency managament - Colour-coded alert
2013-09-29
Energy Management *
Energy audits 2013-09-14
2013-09-15
TMB
Technical Management Board
ISO/DGuide 82
Guide for addressing sustainability in standards 2013-10-19
2013-11-14
JTC 1 ISO/IEC DIS 29182-7
Information technology *
2013-09-22
Analysis of gases *
2013-11-07
2013-11-14
Corrosion of metals and alloys
TC 158 ISO/DIS 6145-2
Surface chemical analysis - Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
Water quality
TC 156 ISO/DIS 7441
Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification for escalators and moving walks
2013-11-07
Geosynthetics
(Revision of ISO 20712-3:2008)
TC 147
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)
Surface chemical analysis *
TC 221
Graphical symbols *
*
2013-11-07
Cleaning equipment for air and other gases
TC 145 ISO/DIS 20712-3
ISO/DIS 25745-2
Plastics pipes, fittings and valves for the transport of fluids
TC 142 ISO/DIS 16170
Non-destructive testing — Evaluation of vision acuity of NDT personnel
2013-09-25
Lifts, escalators and moving walks
(Revision of ISO 5053:1987)
TC 135
Document management — Strategy markup language (StratML) — Part 1: StratML core elements
ISO/IEC 14443-3:2011/ DAmd 6.2
*
ISO/IEC DIS 14763-3
*
2013-09-25
Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 7: Interoperability guidelines Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling
2013-09-08
2013-08-07
2013-09-20
ISO Update, Supplement to ISO Focus -- July 2013
(Revision of ISO/IEC 14763-3:2006) ISO/IEC 23002-4:2010/ DAmd 3
*
Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 3: Graphics tool library (GTL) for the reconfigurable multimedia coding (RMC) framework
ISO/FDIS 4064-4
*
2013-09-26 ISO/FDIS 4064-5
*
Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1 (Revision of ISO 4064-1:2005) Water meters for cold potable water and hot water — Part 5: Installation requirements
2013-08-21
2013-08-21
(Revision of ISO 4064-2:2005)
TC 34 ISO/FDIS 20483
Food products *
FDIS circulated ISO/FDIS 11816-1
Period from 01 June to 30 June 2013
*
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only
TC 43 ISO/FDIS 1999
ISO/FDIS 8791-2
TC 20 ISO/FDIS 14222
*
TC 22 ISO/FDIS 12619-1
*
*
ISO/FDIS 4064-2
TC 63
Space environment (natural and artificial) — Earth upper atmosphere
ISO/FDIS 12821
*
Agricultural irrigation equipment — Filters for microirrigation — Part 3: Automatic flushing strainer-type filters and disc filters (Revision of ISO 9912-3:1992)
*
Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements (Revision of ISO 4064-1:2005) Water meters for cold potable water and hot water — Part 2: Test methods
2013-08-18
*
Water meters for cold potable water and hot water — Part 3: Test report format
*
2013-08-15
2013-08-16
Glass packaging — 26 H 180 crown finish — Dimensions 2013-08-06
ISO/FDIS 16117
Nuclear energy, nuclear technologies, and radiological protection *
TC 94
ISO/FDIS 17249
Nuclear criticality safety — Estimation of the number of fissions of a postulated criticality accident
2013-08-11
Personal safety -- Protective clothing and equipment *
Safety footwear with resistance to chain saw cutting 2013-08-28 (Revision of ISO 17249:2004, ISO 17249:2004/Amd 1:2007)
ISO/FDIS 16900-11 2013-08-21
2013-08-21
TC 163 2013-08-21
*
TC 146 ISO/FDIS 13137
(Revision of ISO 4064-3:2005) ISO/FDIS 4064-3
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
Glass containers
TC 85
Measurement of fluid flow in closed conduits *
Plastics *
2013-08-06
Tractors and machinery for agriculture and forestry
TC 30 ISO/FDIS 4064-1
2013-08-11
ISO/FDIS 30021
Aircraft and space vehicles
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 1: General requirements and definitions
Acoustics — Estimation of noiseinduced hearing loss 2013-08-18
TC 61
Road vehicles
TC 23 ISO/FDIS 9912-3
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method (Revision of ISO 8791-2:1990)
2013-08-14
(Revision of ISO 1999:1990)
Paper, board and pulps *
Milk and milk products — Determination of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks (Revision of ISO 11816-1:2006)
2013-08-07
Acoustics
Vote terminates
TC 6
Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl method (Revision of ISO 20483:2006)
Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision
2013-08-11
Air quality *
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
2013-08-28
Thermal performance and energy use in the built environment
(Revision of ISO 4064-3:2005)
ISO Update, Supplement to ISO Focus -- July 2013
5
ISO/FDIS 9076-1
*
TC 164 ISO/FDIS 7802
Thermal insulation — Mineral wool loose-fill for ventilated roof spaces — Part 1: Material specification and test methods
ISO/IEEE FDIS 11073-10417 2013-08-25
Mechanical testing of metals *
*
ISO/IEEE FDIS 11073-10418
Metallic materials — Wire — Wrapping test
*
2013-08-28 (Revision of ISO 7802:1983) ISO/FDIS 8492
*
JTC 1
Metallic materials — Tube — Flattening test 2013-09-28
ISO/IEC FDIS 29101
Health informatics — Personal health device communication — Part 10417: Device specialization — Glucose meter (Revision of ISO/IEEE 11073-10417:2010) Health informatics — Personal health device communication — Part 10418: Device specialization — International Normalized Ratio (INR) monitor
2013-11-14
2013-11-14
Information technology *
Information technology — Security techniques — Privacy architecture framework
2013-08-15
(Revision of ISO 8492:1998) ISO/FDIS 8494
*
ISO/IEC FDIS 11160-2
Metallic materials — Tube — Flanging test
Information technology — Office equipment — Minimum information to be included in specification sheets — Printers — Part 2: Class 3 and Class 4 printers (Revision of ISO/IEC 11160-2:1996)
2013-09-28 (Revision of ISO 8494:1998) ISO/FDIS 8495
*
Metallic materials — Tube — Ring-expanding test 2013-09-28 (Revision of ISO 8495:1998)
ISO/FDIS 8496
*
ISO/IEC 23003-3:2012/ FDAmd 2
*
Metallic materials — Tube — Ring tensile test
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2: Reference software
2013-08-12
2013-08-22
2013-09-28 (Revision of ISO 8496:1998) ISO/FDIS 20482
*
Metallic materials — Sheet and strip — Erichsen cupping test 2013-09-28
Standards published
(Revision of ISO 20482:2003, ISO 20482:2003/DAmd 1) ISO/FDIS 22889
*
TC 172 ISO/FDIS 8980-3
ISO/FDIS 14889
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint (Revision of ISO 22889:2007)
2013-08-19
* Available in English only ** French version of standard previously published in English only
Optics and photonics *
*
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods (Revision of ISO 8980-3:2003) Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses
New International Standards published between 01 June and 30 June 2013
2013-08-07 Price group
2013-08-07
IIW
International Institute of Welding
ISO 6847:2013
Welding consumables — Deposition of a weld metal pad for chemical analysis
(Revision of ISO 14889:2003)
TC 180 ISO/FDIS 9806
B
Solar energy *
Solar energy — Solar thermal collectors — Test methods 2013-08-07 (Revision of ISO 98061:1994, ISO 9806-2:1995, ISO 9806-3:1995)
TC 215 ISO/IEEE FDIS 11073-10102
ISO/IEEE FDIS 11073-10103
6
*
Health informatics — Point-ofcare medical device communication — Part 10102: Nomenclature — Annotated ECG Health informatics — Point-ofcare medical device communication — Part 10103: Nomenclature — Implantable device, cardiac
Rolling bearings
ISO 582:1995/ Amd 1:2013
Rolling bearings — Chamfer dimensions — Maximum values — Amendment 1
TC 8
Health informatics *
TC 4
ISO 13643-1:2013 2013-11-14
ISO 13643-2:2013
XZ
Ships and marine technology *
*
Ships and marine technology — Manoeuvring of ships — Part 1: General concepts, quantities and test conditions Ships and marine technology — Manoeuvring of ships — Part 2: Turning and yaw checking
R
L
2013-11-14
ISO Update, Supplement to ISO Focus -- July 2013
ISO 13643-3:2013
ISO 13643-4:2013
ISO 13643-5:2013
ISO 13643-6:2013
*
*
*
*
TC 10 ISO 128-15:2013
ISO 129-4:2013
Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials
*
*
Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings Technical product documentation (TPD) — Indication of dimensions and tolerances — Part 4: Dimensioning of shipbuilding drawings
Steel
ISO 377:2013
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing *
E
L
*
ISO 114527:2003/Amd 1:2013
ISO 3560:2013
*
Cheese and processed cheese — Determination of the total solids content (Reference method) — Technical Corrigendum 1
TC 42
ISO 18902:2013
Photography *
*
TC 43 F
D
L
Steel and steel products — General technical delivery requirements
ISO 20906:2009/ Amd 1:2013
ISO/TR 16250:2013
*
*
Welding and allied processes Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
ISO 12932:2013
Welding — Laser-arc hybrid welding of steels, nickel and nickel alloys — Quality levels for imperfections
ISO 15614-14:2013
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys
TC 45 ISO 1629:2013
ISO 23273:2013
TC 23
*
*
Fuel cell road vehicles — Safety specifications — Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
Tractors and machinery for agriculture and forestry
ISO Update, Supplement to ISO Focus -- July 2013
XZ
H
M
M
Rubber and latices — Nomenclature C
XZ
ISO/TS 17796:2013
ISO 5892:2013
*
*
E
Road vehicles — Objective rating metrics for dynamic systems
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements
E
Rubber and rubber products *
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 10423:2009
Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment
F
TC 71 C
Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
TC 67 V
ISO 18868:2013
Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports — Amendment 1
ISO 12996:2013
Road vehicles — Frontal fixed barrier or pole impact test procedure
Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
Imaging materials — Processed imaging materials — Albums, framing and storage materials
TC 44
G ISO 15829:2013
Photography — Electronic still-picture imaging — Noise measurements
Acoustics *
Steel and steel products — Inspection documents
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection — Amendment 1
free
R
Road vehicles *
Food products
ISO 5534:2004/Cor 1:2013
E
P
B
TC 22
Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator's field of vision — Part 1: Field of vision to the front
TC 34
ISO 15739:2013
G ISO 10474:2013
*
K
Technical product documentation
TC 17
ISO 404:2013
ISO 5721-1:2013
ISO 28842:2013
G
E
XC
Concrete, reinforced concrete and pre-stressed concrete *
Guidelines for simplified design of reinforced concrete bridges XC
7
TC 84
Devices for administration of medicinal products and intravascular catheters
ISO 10555-1:2013
Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements
ISO 10555-3:2013
Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters
ISO 10555-4:2013
Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters
ISO 10555-5:2013
Intravascular catheters — Sterile and single-use catheters — Part 5: Overneedle peripheral catheters
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 15690:2013
Radiological protection — Recommendations for dealing with discrepancies between personal dosimeter systems used in parallel
TC 89 *
ISO 18776:2008/ Amd 1:2013
*
B
F
E
Laminated veneer lumber (LVL) — Specifications — Amendment 1
Fire safety *
Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods
J
Fire safety engineering — Guidance for use of fire zone models K
TC 94
Personal safety -- Protective clothing and equipment
ISO/TS 16976-7:2013
Respiratory protective devices — Human factors — Part 7: Hearing and speech
TC 96
ISO 19232-1:2013
Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
ISO 19232-2:2013
Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
ISO 10928:2009/ Amd 1:2013
F
*
TC 147
ISO/TS 17379-2:2013
*
*
*
TC 164
Cranes — Inspections — Part 1: General
ISO 12110-1:2013
TC 122 *
Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
ISO 12110-2:2013
*
TC 172
Direct Marking on Plastic Returnable Transport Items (RTIs)
ISO/TS 17915:2013 V
*
*
N
Packaging
TC 190
Application Guideline on Data Carriers for Supply Chain Management
Plastics piping systems — Glassreinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1
M
D
C
E
B
B
H
XZ
Water quality — Determination of selenium — Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) Water quality — Determination of selenium — Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
H
J
Mechanical testing of metals
Freight containers *
H
Water quality
Cranes
TC 104
ISO/TR 17370:2013
Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
ISO 19232-4:2013
ISO/TS 17379-1:2013
J
ISO/TR 17350:2013
Non-destructive testing
ISO 19232-5:2013
Plywood — Bonding quality — Part 1: Test methods — Amendment 1
Hydraulic fluid power — Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
TC 135
ISO 19232-3:2013
F
Packaging material recycling — Report on substances and materials which may impede recycling
Fluid power systems *
XZ
ISO/TS 13447:2013
ISO 1496-1:2013
ISO/TR 10686:2013
XZ
TC 92
ISO 9927-1:2013
*
TC 131 M
Wood-based panels
ISO 124661:2007/Amd 1:2013
ISO/TR 22899-2:2013
ISO/TR 17098:2013
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
M
Q
Optics and photonics *
Optics and photonics — Measurement method of semiconductor lasers for sensing
N
Soil quality
U
8
ISO Update, Supplement to ISO Focus -- July 2013
ISO 17380:2013
Soil quality — Determination of total cyanide and easily liberatable cyanide — Continuous-flow analysis method
TC 193
Natural gas
ISO 13686:2013
Natural gas — Quality designation
TC 210 H ISO/TR 24971:2013
Safety of machinery
ISO Guide 78:2012
Safety of machinery — Rules for drafting and presentation of safety standards
TC 204 ISO/TR 14806:2013
ISO 15638-2:2013
ISO 15638-3:2013
ISO 15638-5:2013
ISO 15638-7:2013
ISO/TS 17931:2013
ISO 24102-1:2013
ISO 24102-3:2013
ISO 24102-4:2013
ISO 24102-5:2013
*
*
*
*
*
*
*
*
*
*
TC 206 ISO 14544:2013
L
Medical devices — Guidance on the application of ISO 14971
TC 213
ISO/TS 8062-2:2013
Dimensional and geometrical product specifications and verification *
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
Intelligent transport systems
TC 215
Health informatics
Intelligent transport systems — Public transport requirements for the use of payment applications for fare media
ISO 21549-1:2013
Health informatics — Patient healthcard data — Part 1: General structure
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 2: Common platform parameters using CALM Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 5: Generic vehicle information Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 7: Other applications Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 3: Service access points Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 4: Station-internal management communications Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 5: Fast service advertisement protocol (FSAP)
P
V
V
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compression properties
ISO Update, Supplement to ISO Focus -- July 2013
ISO/IEC 18180:2013
ISO/IEC 15504-6:2013
Information technology *
*
ISO/IEC 20000-3:2012
XA
Q
*
ISO/IEC 23001-8:2013
*
*
XA ISO/IEC 24769-2:2013
*
N
J
Information technology — Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2 Information technology — Process assessment — Part 6: An exemplar system life cycle process assessment model Information technology — Service management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1
ISO/IEC 24787:2010/ Cor 1:2013
ISO/IEC 23009-4:2013
V
U
B
JTC 1
ISO/IEC 19794-4:2011/ Amd 1:2013
*
ISO/IEC 19794-5:2005/ Cor 3:2013
*
Information technology — Identification cards — On-card biometric comparison — Technical Corrigendum 1 Information technology — MPEG systems technologies — Part 8: Codingindependent code points Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4: Segment encryption and authentication
W
XB
N
free
L
M
Information technology — Real-time locating systems (RTLS) device conformance test methods — Part 2: Test methods for air interface communication at 2,4 GHz
N
Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 1: Conformance testing methodology and clarification of defects
XZ
Information technology — Biometric data interchange formats — Part 5: Face image data — Technical Corrigendum 3
free
M
Fine ceramics *
*
F T
TC 199
Quality management and corresponding general aspects for medical devices
Standards confirmed J
9
ISO 899-2:2003
(reconfirmed)
The following International Standards are confimred for a five year period:
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
TC 17
Steel
ISO 14691:2008
ISO 683-14:2004
(reconfirmed)
ISO 15649:2001
ISO 683-15:1992
(reconfirmed)
ISO 25457:2008
TC 23
Tractors and machinery for agriculture and forestry
TC 69
Applications of statistical methods
ISO 5725-2:1994
(reconfirmed)
ISO 22866:2005
(reconfirmed)
ISO 5725-3:1994
(reconfirmed)
TC 29
Small tools
ISO 5725-4:1994
(reconfirmed)
ISO 11415:1997
(reconfirmed)
TC 94
ISO 8976:2004
(reconfirmed)
Personal safety -- Protective clothing and equipment
ISO 8979:2004
(reconfirmed)
ISO 15383:2001
(reconfirmed)
ISO 9343:2004
(reconfirmed)
ISO 15538:2001
(reconfirmed)
ISO 9654:2004
(reconfirmed)
TC 98
Bases for design of structures
ISO 9655:2004
(reconfirmed)
ISO 9194:1987
(reconfirmed)
ISO 9656:2004
(reconfirmed)
ISO 12494:2001
(reconfirmed)
ISO 9657:2004
(reconfirmed)
TC 100
ISO 10914:1996
(reconfirmed)
Chains and chain sprockets for power transmission and conveyors
TC 34
Food products
ISO 6971:2002
(reconfirmed)
ISO 1839:1980
(reconfirmed)
ISO 6972:2002
(reconfirmed)
ISO 3103:1980
(reconfirmed)
TC 113
Hydrometry
ISO 7514:1990
(reconfirmed)
ISO 9826:1992
(reconfirmed)
ISO 10727:2002
(reconfirmed)
ISO 13550:2002
(reconfirmed)
TC 39
Machine tools
TC 126
Tobacco and tobacco products
ISO 230-6:2002
(reconfirmed)
ISO/TS 7821:2005
(reconfirmed)
ISO 13041-1:2004
(reconfirmed)
ISO 9512:2002
(reconfirmed)
ISO 13041-4:2004
(reconfirmed)
TC 127
Earth-moving machinery
ISO 13041-8:2004
(reconfirmed)
ISO 5006:2006
TC 42
Photography
TC 131
Fluid power systems
ISO 6:1993
(reconfirmed)
ISO 3019-1:2001
(reconfirmed)
ISO 519:1992
(reconfirmed)
ISO 3019-2:2001
(reconfirmed)
ISO 1008:1992
(reconfirmed)
ISO 21287:2004
(reconfirmed)
ISO 1203:1998
(reconfirmed)
ISO 9461:1992
(reconfirmed)
ISO 1755:1987
(reconfirmed)
ISO 17082:2004
(reconfirmed)
ISO 1948:1987
(reconfirmed)
ISO 2942:2004
(reconfirmed)
ISO 7766:2003
(reconfirmed)
TC 162
Doors and windows
ISO 10349-2:1992
(reconfirmed)
ISO 1804:1972
ISO 10349-3:1992
(reconfirmed)
TC 168
Prosthetics and orthotics
ISO 10349-4:1992
(reconfirmed)
ISO 8548-1:1989
(reconfirmed)
ISO 10349-5:1992
(reconfirmed)
ISO 8548-2:1993
(reconfirmed)
ISO 10349-6:1992
(reconfirmed)
ISO 8548-3:1993
(reconfirmed)
ISO 10349-7:1992
(reconfirmed)
ISO 8548-4:1998
(reconfirmed)
ISO 10349-9:1992
(reconfirmed)
ISO 29781:2008
ISO 10349-10:1992
(reconfirmed)
ISO 29782:2008
ISO 10349-11:1992
(reconfirmed)
ISO 10349-12:1992
(reconfirmed)
ISO 14548:1998 ISO 14808:1997
TC 44
Welding and allied processes
ISO 29783-1:2008
TC 172
Optics and photonics
ISO 8424:1996
(reconfirmed)
ISO 9342-1:2005
(reconfirmed)
(reconfirmed)
ISO 9342-2:2005
(reconfirmed)
(reconfirmed)
TC 173
Assistive products for persons with disability
ISO 16391:2002
(reconfirmed)
TC 213
Dimensional and geometrical product specifications and verification
ISO 9012:2008
TC 61
Plastics
ISO 868:2003
(reconfirmed)
10
(reconfirmed)
ISO Update, Supplement to ISO Focus -- July 2013
ISO 1:2002
(reconfirmed)
ISO/TS 23165:2006
(reconfirmed)
TC 215
Health informatics
Meetings called for the month of May are not in this edition.
ISO 17090-3:2008
JTC 1
(update at 01 June 2013) * Information definite but meeting not yet formally convened ** Provisional
Information technology
ISO/IEC 9796-3:2006
July 2013
ISO/IEC 10116:2006 ISO/IEC 10118-3:2004
(reconfirmed)
ISO/IEC 10118-4:1998
(reconfirmed)
ISO/IEC 11770-4:2006 ISO/IEC TR 14516:2002
1-5
Bornholm (Denmark)
TC 268
Sustainable development in communities
2
Berlin (Germany)
TC 274
Light and lighting
2-4
Bornholm (Denmark)
TC 268/SC 1
Sustainable development in communities/ Smart community infrastructures
12
Nottingham (United Kingdom)
TC 261
Additive manufacturing
PC 273
Customer contact centres
15-17 Vienna (Austria)
ISO/IEC 14888-3:2006
August 2013
ISO/IEC 15816:2002
(reconfirmed)
5-8
Washington, D.C (USA)
TC 134
Fertilizers and soil conditioners
ISO/IEC 15945:2002
(reconfirmed)
18
Pretoria (South Africa)
TC 27/SC 1
Solid mineral fuels/ Coal preparation: Terminology and performance
18-23 Centurion (South Africa)
TC 27
Solid mineral fuels
18-23 Centurion (South Africa)
TC 27/SC 3
Solid mineral fuels/ Coke
18-23 Centurion (South Africa)
TC 27/SC 4
Solid mineral fuels/ Sampling
19-23 Pretoria (South Africa)
TC 27/SC 5
Solid mineral fuels/ Methods of analysis
JTC 1/SC 35
Information technology/User interfaces
ISO/IEC 18033-2:2006
Standards withdrawn
26-30 (Canada)
**
Period from 01 June to 30 June 2013
September 2013 TC 22
Road vehicles
ISO 23273-2:2006
(replaced by ISO 23273:2013)
TC 23
Tractors and machinery for agriculture and forestry
ISO 3339-0:1986
(replaced by )
TC 46
Information and documentation
ISO/TR 21449:2004
(replaced by )
TC 94
Personal safety -- Protective clothing and equipment
ISO 2023:1994
(replaced by ISO 20344:2011)
TC 213
Dimensional and geometrical product specifications and verification
ISO 8062:1994
(replaced by ISO 8062-1:2007, ISO 80623:2007, ISO/TS 8062-2:2013)
JTC 1
Information technology
ISO/IEC TR 15504-6:2008
(replaced by ISO/IEC 15504-6:2013)
Meeting calendar ISO Update, Supplement to ISO Focus -- July 2013
1-4
Moscow (Russian Federation)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
3-6
Hangzhou (China)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
4
(Europe)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
7-13
Moscow (Russian Federation)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
8-13
Suzhou (China)
TC 61
Plastics
9
Victoria (Canada)
TC 33
Refractories
9-10
London (United Kingdom)
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10
Paris (France)
TC 26
Copper and copper alloys
9-11
Gaithersburg (USA)
TC 172/SC 9
Optics and photonics/Electro-optical systems
11
9-13
9-13
Delft (Netherlands)
*
JTC 1/SC 34
Information technology/Document description and processing languages
Montreal (Canada)
TC 108/SC 4
9-13
Tallberg (Sweden)
TC 258
Project, programme and portfolio management
10
London (United Kingdom)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
Paris (France)
TC 79/SC 11
Light metals and their alloys/Titanium
10-13 Stockholm (Sweden)
TC 205
Building environment design
11
London (United Kingdom)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
London (United Kingdom)
TC 21/SC 11
10
11
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock
Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11
Suzhou (China)
TC 61/SC 1
Plastics/Terminology
11
Suzhou (China)
TC 61/SC 2
Plastics/Mechanical properties
11
Suzhou (China)
TC 61/SC 5
Plastics/Physicalchemical properties
11
Suzhou (China)
*
TC 61/SC 10
Plastics/Cellular plastics
11
Suzhou (China)
*
TC 61/SC 11
Plastics/Products
11
Suzhou (China)
*
TC 61/SC 12
Plastics/Thermosetting materials
11
Paris (France)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11
11
Stockholm (Sweden)
Stockholm (Sweden)
11-12 Stockholm (Sweden)
12
London (United Kingdom)
TC 163/SC 2
TC 163/SC 3
TC 119/SC 3
TC 21/SC 2
Thermal performance and energy use in the built environment/Calculation methods Thermal performance and energy use in the built environment/ Thermal insulation products Powder metallurgy/ Sampling and testing methods for sintered metal materials (excluding hardmetals) Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
12
Suzhou (China)
TC 61/SC 4
Plastics/Burning behaviour
12
Suzhou (China)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
12
12
Suzhou (China)
*
TC 61/SC 9
Plastics/Thermoplastic materials
12
Suzhou (China)
*
TC 61/SC 13
Plastics/Composites and reinforcement fibres
12
Paris (France)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
12
Paris (France)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
12
Stockholm (Sweden)
TC 119/SC 2
Powder metallurgy/ Sampling and testing methods for powders (including powders for hardmetals)
12
Stockholm (Sweden)
TC 119/SC 4
Powder metallurgy/ Sampling and testing methods for hardmetals
12
Vienna (Austria)
TC 146/SC 3
Air quality/Ambient atmospheres
12
Stockholm (Sweden)
TC 163/SC 1
Thermal performance and energy use in the built environment/Test and measurement methods
TC 163
Thermal performance and energy use in the built environment
12-13 Stockholm (Sweden) 13
London (United Kingdom)
*
TC 21
Equipment for fire protection and fire fighting
13
Singapore (Singapore)
*
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
13
Paris (France)
TC 79
Light metals and their alloys
13
Stockholm (Sweden)
TC 119
Powder metallurgy
13
Stockholm (Sweden)
TC 119/SC 5
Powder metallurgy/ Specifications for powder metallurgical materials (excluding hardmetals)
13
Vienna (Austria)
TC 146/SC 5
Air quality/ Meteorology
13
Vienna (Austria)
TC 146/SC 6
Air quality/Indoor air
13
Munich (Germany)
TC 244
Industrial furnaces and associated processing equipment
TC 164
Mechanical testing of metals
*
PC 271
Compliance management systems
16-17 St. Petersburg (Russian Federation)
*
DEVCO
Committee on developing countries matters
16-17 St. Petersburg (Russian Federation)
*
TMB
Technical Management Board
*
15-20 Velsen (Netherlands) 16
Sydney (Australia)
ISO Update, Supplement to ISO Focus -- July 2013
16-20 Copenhagen (Denmark)
*
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Offshore structures
16-20 London (United Kingdom)
TC 150
Implants for surgery
17
Fukuoka (Japan)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
17
Paris (France)
TC 254
Safety of amusement rides and amusement devices
17-18 Jiangyin (China)
TC 105
Steel wire ropes
17-18 Belo Horizonte (Brazil)
TC 155
Nickel and nickel alloys
17-19 Tokyo (Japan)
*
17-19 Chengdu (China) 18
St. Petersburg (Russian Federation)
18-20 St. Petersburg (Russian Federation)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
TC 256
Pigments, dyestuffs and extenders
**
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
*
GA
General Assembly
24-25 Beijing (China)
TC 265
Carbon dioxide capture, transportation, and geological storage
24-26 Gaithersburg (USA)
TC 172/SC 1
Optics and photonics/Fundamental standards
25-26 Oslo (Norway)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
25-27 Tokyo (Japan)
TC 267
Facilities management
26-27 Rotterdam (Netherlands)
TC 260
Human resource management
26-27 Toulouse (France)
*
TC 264
Fireworks
27
Seoul (Korea, Republic of)
**
TC 44/SC 12
Welding and allied processes/Soldering materials
27
Bromont (Québec) (Canada)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
27
Helsinki (Finland)
TC 213
Dimensional and geometrical product specifications and verification
29
Jeju (Korea, Republic of)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
*
18-20 Shanghai (China)
TC 232
Learning services outside formal education
19
Atlanta (USA)
TC 142
Cleaning equipment for air and other gases
19
Fukuoka (Japan)
TC 190/SC 4
Soil quality/Biological methods
19-20 Graz (Austria)
TC 172/SC 6
Optics and photonics/ Geodetic and surveying instruments
20
Fukuoka (Japan)
TC 190
Soil quality
Seattle (USA)
**
TC 89
Wood-based panels
20
Fukuoka (Japan)
TC 190/SC 2
Soil quality/Sampling
(Germany)
**
TC 180
Solar energy
20
Fukuoka (Japan)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
20
Fukuoka (Japan)
21
St. Petersburg (Russian Federation)
*
23-24 Paris (France) 23-27 Kobe (Japan)
*
TC 190/SC 7
Soil quality/Soil and site assessment
COUNCIL
Council
PC 277
Sustainable purchasing
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
23-27 Milan (Italy)
*
TC 120
Leather
23-27 Milan (Italy)
*
TC 120/SC 1
Leather/Raw hides and skins, including pickled pelts
23-27 Milan (Italy)
*
TC 120/SC 2
Leather/Tanned leather
23-27 Milan (Italy)
*
TC 120/SC 3
Leather/Leather products
23-27 Vienna (Austria)
TC 218
Timber
23-27 Chicago (USA)
TC 262
Risk management
ISO Update, Supplement to ISO Focus -- July 2013
Paris (France)
*
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
London (United Kingdom)
**
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
September-October 2013 30-4
(Sweden)
**
30-1
Tampere (Finland)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
30-2
Berlin (Germany)
TC 34/SC 15
Food products/Coffee
October 2013 2-3
Tampere (Finland)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
2-3
St. John, Newfoundland (Canada)
TC 67/SC 8
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Arctic operations
3-4
Chantilly (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
5
Incheon (Korea, Republic of)
*
TC 106
Dentistry
13
6-11
Kobe (Japan)
7
7
7-8
TC 204
Intelligent transport systems
Berlin (Germany)
TC 10/SC 10
Technical product documentation/ Process plant documentation
Istanbul (Turkey)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
Milan (Italy)
*
**
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
7-8
Sparks, Nevada (USA)
TC 209
Cleanrooms and associated controlled environments
7-9
Tokyo (Japan)
TC 70
Internal combustion engines
7-9
Tokyo (Japan)
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
*
7-9
Istanbul (Turkey)
**
TC 126
Tobacco and tobacco products
7-11
Beijing (China)
*
CASCO
Committee on conformity assessment
7-11
Washington, D.C (USA)
*
TC 121/SC 4
Anaesthetic and respiratory equipment/ Terminology and semantics
7-11
Oslo (Norway)
*
TC 138
7-11
Colorado Springs (USA)
8
Istanbul (Turkey)
11
Berlin (Germany)
TC 59/SC 13
Buildings and civil engineering works/ Organization of information about construction works
11
Garching (Germany)
**
TC 60
Gears
11
Garching (Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching (Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
11
Venice (Italy)
*
TC 146/SC 2
Air quality/Workplace atmospheres
TC 59/SC 15
Buildings and civil engineering works/ Performance description of houses
TC 44/SC 3
Welding and allied processes/Welding consumables
14-15 Brussels (Belgium)
TC 122/SC 4
Packaging/Packaging and environment
14-17 Stuttgart (Germany)
TC 165
Timber structures
14-18 Paris (France)
PC 271
Compliance management systems
13-17 London (United Kingdom)
14-15 Miami (USA)
14-18 Paris (France)
**
TC 2
Fasteners
14-18 Seoul (Korea, Republic of)
*
TC 108
Mechanical vibration, shock and condition monitoring
Plastics pipes, fittings and valves for the transport of fluids
15
Halifax (Canada)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
TC 247
Fraud countermeasures and controls
15
La Plaine StDenis (France)
TC 44/SC 5
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
Welding and allied processes/Testing and inspection of welds
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
**
TC 44/SC 9
Welding and allied processes/Health and safety
16-18 Munich (Germany)
*
TC 58/SC 3
Gas cylinders/Cylinder design
**
15-18 Berlin (Germany)
8
Boulder (USA)
*
TC 202/SC 1
Microbeam analysis/ Terminology
8-9
Berlin (Germany)
*
TC 263
Coalbed methane (CBM)
8-10
Berlin (Germany)
TC 59/SC 8
Buildings and civil engineering works/ Sealants
8-10
Boulder (USA)
TC 202
Microbeam analysis
16-18 (Korea, Republic of)
**
TC 123
Plain bearings
9
London (United Kingdom)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
16-18 (Korea, Republic of)
**
TC 123/SC 2
9
Istanbul (Turkey)
TC 38/SC 23
Textiles/Fibres and yarns
9
Boulder (USA)
TC 202/SC 2
Microbeam analysis/Electron probe microanalysis
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions
16-18 (Korea, Republic of)
**
TC 123/SC 3
Microbeam analysis/ Analytical electron microscopy
Plain bearings/Dimensions, tolerances and construction details
16-18 (Korea, Republic of)
**
TC 123/SC 5
Plain bearings/ Quality analysis and assurance
16-18 (Korea, Republic of)
**
TC 123/SC 6
Plain bearings/Terms and common items
16-18 (Korea, Republic of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
17-18 La Plaine StDenis (France)
**
TC 44
Welding and allied processes
9
9-10
Boulder (USA)
Seogwipo-si (Korea, Republic of)
10
Istanbul (Turkey)
10
Boulder (USA)
11
Istanbul (Turkey)
14
*
*
**
*
TC 202/SC 3
TC 159
16
La Plaine StDenis (France)
Ergonomics
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
TC 202/SC 4
Microbeam analysis/ Scanning electron microscopy (SEM)
TC 38
Textiles ISO Update, Supplement to ISO Focus -- July 2013
18
Berlin (Germany)
*
19-20 Jacksonville (USA)
21
Singapore (Singapore)
21-25 (United Kingdom)
*
**
21-25 Singapore (Singapore)
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
TC 24/SC 4
Particle characterization including sieving/Particle characterization
TC 8/SC 7
PC 283
31
Bali (Indonesia)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
31
Bali (Indonesia)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
Ships and marine technology/Inland navigation vessels Occupational health and safety management systems - Requirements
Sydney (Australia)
**
TC 157
Non-systemic contraceptives and STI barrier prophylactics
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/ Robots and robotic devices
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/ Plastics pipes and fittings for soil, waste and drainage (including land drainage)
October-December 2013 7-11
Oslo (Norway)
TC 8
Ships and marine technology
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
21-25 Sao Paulo (Brazil)
TC 181
Safety of toys
21-25 Sydney (Australia)
TC 215
Health informatics
28-1
Bali (Indonesia)
TC 45
Rubber and rubber products
28-1
Cambridge (United Kingdom)
TC 121/SC 2
Anaesthetic and respiratory equipment/ Airways and related equipment
28-2
Berlin (Germany)
TC 130
Graphic technology
21-25 (Europe)
21-26 Berlin (Germany)
*
October-November 2013
TC 147
Water quality
22-24 Stockholm (Sweden)
*
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
23
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
Paris (France)
23
Berlin (Germany)
23
1
Bali (Indonesia)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
TC 176
Quality management and quality assurance
TC 22/SC 9
Road vehicles/Vehicle dynamics and roadholding ability
London (United Kingdom)
TC 25
Cast irons and pig irons
2-9
Porto (Portugal)
23
Courbevoie, Paris (France)
TC 111
Round steel link chains, chain slings, components and accessories
2-9
Porto (Portugal)
**
TC 176/SC 1
Quality management and quality assurance/Concepts and terminology
23
Berlin (Germany)
*
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
2-9
Porto (Portugal)
**
TC 176/SC 3
Quality management and quality assurance/Supporting technologies
23
Berlin (Germany)
**
TC 173/SC 7
Assistive products for persons with disability/Accessible design
4-8
Sydney (Australia)
TC 34/SC 17
Food products/Management systems for food safety
23
Tokyo (Japan)
TC 206
Fine ceramics
4-8
Porto (Portugal)
TC 176/SC 2
24
Berlin (Germany)
TC 147/SC 6
Water quality/ Sampling (general methods)
Quality management and quality assurance/Quality systems
4-9
JTC 1
Food products/Sensory analysis
Perros-Guirec (France)
**
TC 34/SC 12
Information technology
6-8
Paris (France)
**
TC 275
Sludge recovery, recycling, treatment and disposal
24-25 Sarajevo (Bosnia and Herzegovina)
*
*
November 2013
**
24-25 Berlin (Germany)
TC 173
Assistive products for persons with disability
6-9
TC 227
Springs
Tokyo (Japan)
TC 146/SC 1
Air quality/Stationary source emissions
Washington, D.C (USA)
*
25
7
Okinawa (Japan)
*
TC 201
28
Karlsruhe (Germany)
TC 117
Fans
Surface chemical analysis
7
Okinawa (Japan)
TC 201/SC 1
28-29 Düsseldorf (Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
Surface chemical analysis/Terminology
7
Okinawa (Japan)
*
TC 201/SC 2
28-31 Bali (Indonesia)
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
Surface chemical analysis/General procedures
7
Okinawa (Japan)
*
TC 201/SC 9
TC 266
Biomimetics
Surface chemical analysis/Scanning probe microscopy
30
Prague (Czech Republic)
*
ISO Update, Supplement to ISO Focus -- July 2013
15
8
Delft (Netherlands)
8
Shenzen (China)
8
Shenzen (China)
8
Shenzen (China)
8
Okinawa (Japan)
*
*
*
TC 92/SC 1
Fire safety/Fire initiation and growth
TC 160
Glass in building
TC 160/SC 1
Glass in building/Product considerations
TC 160/SC 2
Glass in building/Use considerations
TC 201/SC 3
Surface chemical analysis/Data management and treatment
8
Okinawa (Japan)
*
TC 201/SC 4
Surface chemical analysis/Depth profiling
8
Okinawa (Japan)
*
TC 201/SC 7
Surface chemical analysis/Electron spectroscopies
9
Okinawa (Japan)
10-15 Mexico (Mexico)
*
*
11-15 Mexico (Mexico)
TC 201/SC 8
TC 113
Hydrometry
TC 94/SC 15
Personal safety -Protective clothing and equipment/ Respiratory protective devices
*
TC 98
Bases for design of structures
13
Tokyo (Japan)
**
TC 110/SC 1
Industrial trucks/General terminology
14
Tokyo (Japan)
*
TC 110/SC 2
Industrial trucks/ Safety of powered industrial trucks
TC 39/SC 10
Machine tools/Safety
14-15 Redlands (USA)
*
TC 211
Geographic information/ Geomatics
15
Tokyo (Japan)
**
TC 110
Industrial trucks
18
Berlin (Germany)
*
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
18-20 Berlin (Germany)
*
TC 20
Aircraft and space vehicles
TC 84
Devices for administration of medicinal products and intravascular catheters
18-21 Exton (USA)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
London (United Kingdom)
**
TC 59/SC 2
Buildings and civil engineering works/ Terminology and harmonization of languages
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
13-14 Paris (France)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
Paris (France)
**
TC 17/SC 3
Steel/Steels for structural purposes
**
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
(Sweden)
**
TC 213
Dimensional and geometrical product specifications and verification
TC 118
Compressors and pneumatic tools, machines and equipment
Month unknown 2013 Bratislava (Slovakia)
January 2014
Surface chemical analysis/Glow discharge spectroscopy
11-15 Tokyo (Japan)
14-15 Frankfurt (Germany)
New Delhi (India)
February 2014 10-14 Paris (France)
March 2014 11-14 London (United Kingdom) 11-14 London (United Kingdom)
*
TC 118/SC 3
Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines
11-14 London (United Kingdom)
*
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems
13
London (United Kingdom)
*
TC 118/SC 1
Compressors and pneumatic tools, machines and equipment/Process compressors
13
London (United Kingdom)
*
TC 118/SC 4
Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment
19-21 Singapore (Singapore)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
20-22 Tokyo (Japan)
*
TC 269
Railway applications
27
Milan (Italy)
**
TC 221
Geosynthetics
30
Berlin (Germany)
**
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
23-27 Warsaw (Poland)
*
TC 107
Berlin (Germany)
**
TC 41
Pulleys and belts (including veebelts)
Metallic and other inorganic coatings
23-27 Warsaw (Poland)
*
TC 107/SC 3
Metallic and other inorganic coatings/ Electrodeposited coatings and related finishes
23-27 Warsaw (Poland)
*
TC 107/SC 4
Metallic and other inorganic coatings/ Hot dip coatings (galvanized, etc.)
December 2013 11
Frankfurt (Germany)
12-13 Berlin (Germany)
4th Quarter 2013
16
*
TC 270
Plastics and rubber machines
TC 276
Biotechnology
ISO Update, Supplement to ISO Focus -- July 2013
23-27 Warsaw (Poland)
*
TC 107/SC 7
Metallic and other inorganic coatings/ Corrosion tests
23-27 Warsaw (Poland)
*
TC 107/SC 8
Metallic and other inorganic coatings/ Chemical conversion coatings
27-28 Geneva (Switzerland)
*
COUNCIL
Council
**
PC 271
Compliance management systems
March-April 2014 31-4
Vienna (Austria)
1st Quarter 2014 (Netherlands)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions
April 2014
9-16
London (United Kingdom)
*
TC 10
Technical product documentation
9-16
London (United Kingdom)
*
TC 10/SC 1
Technical product documentation/Basic conventions
9-16
London (United Kingdom)
*
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
12-16 London (United Kingdom)
**
TC 68/SC 4
Financial services/ Securities and related financial instruments
12-16 Zhangjiajie (China)
**
TC 195
Building construction machinery and equipment
12-16 Zhangjiajie (China)
**
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
14-16 Rosslyn (USA)
**
TC 145
Graphical symbols
14-16 Rosslyn (USA)
**
TC 145/SC 1
Graphical symbols/ Public information symbols
14-16 Rosslyn (USA)
**
TC 145/SC 2
Graphical symbols/ Safety identification, signs, shapes, symbols and colours
14-16 Rosslyn (USA)
**
TC 145/SC 3
Graphical symbols/ Graphical symbols for use on equipment
*
TC 68
Financial services
7-11
Delft (Netherlands)
*
TC 6
Paper, board and pulps
7-11
Delft (Netherlands)
*
TC 6/SC 2
Paper, board and pulps/Test methods and quality specifications for paper and board
7-11
Lund (Sweden)
*
TC 92
Fire safety
7-11
Vitoria (Brazil)
*
TC 102
Iron ore and direct reduced iron
7-11
Vitoria (Brazil)
*
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
15
7-11
Vitoria (Brazil)
*
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
19-23 Berlin (Germany)
**
TC 43
Acoustics
19-23 Berlin (Germany)
**
TC 43/SC 1
Acoustics/Noise
19-24 Karuizawa (Japan)
**
TC 215
Health informatics
22
*
TC 122
Packaging
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
**
TC 46/SC 11
Information and documentation/Archives/ records management
7-11
Vitoria (Brazil)
*
TC 102/SC 3
Iron ore and direct reduced iron/Physical testing
7-11
Bologna (Italy)
*
TC 110/SC 4
Industrial trucks/ Rough-terrain trucks
7-11
Amsterdam (Netherlands)
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
London (United Kingdom)
Prague (Czech Republic)
23-24 Beijing (China)
Washington, D.C (USA)
8-9
(Japan)
**
TC 199
Safety of machinery
8-10
(Brazil)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Pipeline transportation systems
June 2014
16-20 Incheon (Korea, Republic of)
1-6
(Sweden)
**
TC 127
Earth-moving machinery
5-6
Berlin (Germany)
*
TC 211
Geographic information/ Geomatics
*
TC 121
Anaesthetic and respiratory equipment
**
TC 17/SC 17
Steel/Steel wire rod and wire products
*
REMCO
Committee on reference materials
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
14-15 Hong Kong (Hong Kong, China)
*
JTC 1/SC 27
Information technology/IT Security techniques
21-25 (Thailand)
**
TC 34
Food products
23-24 (Europe)
**
TC 167
Steel and aluminium structures
July 2014
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
September 2014
Berlin (Germany)
Berlin (Germany)
**
TC 34/SC 11
Food products/ Animal and vegetable fats and oils
*
TC 46
Information and documentation
May 2014 5-9
Washington, D.C (USA)
ISO Update, Supplement to ISO Focus -- July 2013
Düsseldorf (Germany) 8-11
8-9
Boulder (USA)
Madrid (Spain)
17
8-12
Paris (France)
**
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems
10-12 Rio de Janeiro (Brazil)
*
GA
General Assembly
13
*
COUNCIL
Council
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
Rio de Janeiro (Brazil)
18-19 Manchester (United Kingdom) (USA)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
Milan (Italy)
**
TC 39/SC 4
Machine tools/Woodworking machines
Montreal (Canada)
**
TC 213
Dimensional and geometrical product specifications and verification
3rd Quarter 2014 London (United Kingdom)
**
TC 48
Laboratory equipment
**
TC 215
Health informatics
**
TC 178
Lifts, escalators and moving walks
Toronto (Canada)
**
TC 59
Buildings and civil engineering works
Prague (Czech Republic)
**
TC 135
Non-destructive testing
**
TC 45
Rubber and rubber products
October 2014 5-10
Berlin (Germany)
23-24 (South Africa)
(Germany)
**
TC 190
Soil quality
St. Petersburg, Florida (USA)
**
TC 115
Pumps
London (United Kingdom)
**
TC 213
Dimensional and geometrical product specifications and verification
Foshan (China)
**
TC 107
Metallic and other inorganic coatings
Foshan (China)
**
TC 107/SC 3
Metallic and other inorganic coatings/ Electrodeposited coatings and related finishes
Foshan (China)
**
TC 107/SC 4
Metallic and other inorganic coatings/ Hot dip coatings (galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other inorganic coatings/ Corrosion tests
Foshan (China)
**
TC 107/SC 8
Metallic and other inorganic coatings/ Chemical conversion coatings
(France)
**
TC 29
Small tools
(France)
**
TC 29/SC 9
Small tools/Tools with cutting edges made of hard cutting materials
Tienjin (China)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Europe)
**
TC 215
Health informatics
**
TC 4
Rolling bearings
**
TC 46
Information and documentation
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
**
TC 215
Health informatics
*
TC 154
Processes, data elements and documents in commerce, industry and administration
**
JTC 1
Information technology
February 2015
1st Quarter 2015
April 2015
November 2014 3-7
Cape Town (South Africa)
4th Quarter 2014
18-22 London (United Kingdom)
(Portugal)
**
TC 34/SC 4
Food products/Cereals and pulses
(South Africa)
**
TC 146
Air quality
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(Australia)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
Nairobi (Kenya)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(South Africa)
**
REMCO
(United Kingdom)
**
TC 142
Cleaning equipment for air and other gases
Committee on reference materials
(Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
Suzhou (China)
**
Mechanical testing of metals
(Finland)
**
TC 44
Welding and allied processes
2nd Semester 2014 Madrid (Spain)
Month unknown 2014
18
May 2015
TC 164
Beijing (China)
2nd Quarter 2015 (China)
3rd Quarter 2015 Sao Paulo (Brazil)
October 2015 21-25 Berlin (Germany)
November 2015 (China)
Month unknown 2015
ISO Update, Supplement to ISO Focus -- July 2013
(France)
**
TC 45
Rubber and rubber products
Berlin (Germany)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(United Kingdom)
**
TC 164
Mechanical testing of metals
(Austria)
**
TC 190
Soil quality
Seoul (Korea, Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Australia)
**
TC 178
Lifts, escalators and moving walks
**
JTC 1
Information technology
(Russian Federation)
**
REMCO
Committee on reference materials
Beijing (China)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Australia)
**
TC 44
Welding and allied processes
April 2016
November 2016 (Norway)
Month unknown 2016
ISO Update, Supplement to ISO Focus -- July 2013
19