List of Publication

2 downloads 0 Views 93KB Size Report
Mokhtarian H., Coatanéa E., Paris H., Function modelling combined with physics-based reasoning for ... Journal of Integrated Design and Process Science, Vol 16 No 3, 2012. ..... French Congress of Research in IUT, Nice, France, June, 2005.

List of Publication PUBLICATIONS Eric Coatanéa authored and co-authored a total of 126 scientific publications, comprising: 22 published journal papers, 4 scientific reports 4 reviewed books sections, 78 peer review conference articles, 2 non-refereed scientific articles (since 2008), 5 scientific books (monographs) as co-author (since 2008), 10 publications intended for professional communities (since 1994), 1 publication intended for the general public, 1 doctoral thesis, 3 inventions disclosures

International referee publications Journal articles (refereed) [1]

Mokhtarian H., Coatanéa E., Paris H., Mansour Mbow M., Pourroy F., Marin P. R., Vihinen J., Ikkala K., Ellman A., A conceptual design and modeling framework for integrated additive manufacturing, ASME Journal of Mechanical Design (Special Issue: Designing for Additive Manufacturing), 2018.

[2]

Mokammel F., Coatanea E., Blanco E., Pietola M., Analysis and graph representation of requirements models using computational linguistics methods, System Engineering journal, INCOSE, 2018 (accepted for publication).

[3]

Nagarajan H., Mokhtarian H., Jafarian H., Coatanéa E., Wang G., Wu D., Tsarkov V., Modi S., Knowledge-based optimization of Artificial Neural Network topology: An application to the concurrent combination of experimental sampling and modelling of the Fused Deposition process in Additive Manufacturing. Journal of Mechanical Design, 2018 (accepted for publication).

[4]

Mokhtarian H., Coatanéa E., Paris H., Function modelling combined with physics-based reasoning for assessing design options and supporting innovative ideation, Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), Cambridge University Press, Volume 31, Issue 4

Page 1

(Function Modeling: Benchmark Models, Problems, https://doi.org/10.1017/S0890060417000403 (2017).

and

Approaches),

[5]

Paris H., Mokhtarian H., Coatanéa E., Museau M., Flores Ituarte I., Comparative environmental impacts of additive and subtractive manufacturing technologies, CIRP Annals (2016). [6] Coatanéa E., Roca R., Mokhtarian H., Mokammel F. and Ikkala K., A conceptual modelling and simulation framework for system design, Computing in Science and Engineering. Comput. Sci. Eng. 18, 42 (2016); http://dx.doi.org/10.1109/MCSE.2016.75. [7]

Coatanéa E., Nonsiri S., Roca R., Mokammel F., Kruck J., Christophe F., Systematic Search for Design Contradictions in Systems’ Architecture: Toward A Computer Aided Analysis. Transactions of the SDPS: Journal of Integrated Design and Process Science, vol. 19, no. 1, pp. 25-46, 2015, DOI: 10.3233/jid-20150001.

[8]

Nonsiri S., Christophe F., Coatanéa E., Mokammel F., A Combined Design Structure Matrix (DSM) and Discrete Differential Evolution (DDE) Approach for Scheduling and Organizing System Development Tasks Modelled using SysML, Transactions of the SDPS: Journal of Integrated Design and Process Science, Vol. 18, No 3, pp 19-40, 2014, DOI 10.3233/jid-2014-0013.

[9]

Sirin. G., Paredis C.J.J., Yannou B., Landel E., Coatanea E., A Model Identity Card to Support Simulation Model Development Process in a Collaborative Multidisciplinary Design Environment, Systems Journal, IEEE , vol.PP, no.99, pp.1,12, 2014.

[10] Coatanéa, E., Organizing the product development processes: four perspectives. Editorial, Transactions of the SDPS: Journal of Integrated Design and Process Science, Vol. 18 No. 3, 2014. [11] Micaëlli, J-P., Coatanéa, E., Forest, J., Medyna, G., How to improve Kline and Rosenberg’s chain-linked model of innovation: building blocks and diagram-based languages. Journal of Innovation Economics, ISSN 2032-5355, n°15, 2014/3. [12] Christophe F., Mokammel F., Coatanéa E., An Nguyen Th., Ba Khouya M., and Bernard A., A Methodology supporting the Syntactic, Lexical and Semantic Clarification of Requirements in Systems Engineering. Special issue of International Journal of Product development, Inderscience publisher, Int. J. Product Development, Vol. 19, No. 4, 2014. [13] Coatanéa E., Bakhouya M., Editorial on the special issue of Computer-aided Tools and Methodologies for Early Design, International Journal of Product Development, Editors Eric Coatanéa and Mohamed Bakhouya, Inderscience, 2012. [14] Medyna, G., Nonsiri S., Coatanéa E., Bernard A., Modeling, Evaluation and Simulation During the Early Design Stages: Toward the Development of an

Page 2

Approach Limiting the Need for Specific Knowledge, Transactions of the SDPS: Journal of Integrated Design and Process Science, Vol 16 No 3, 2012. [15] Coatanéa E., Tumer I., Jensen D., Nonsiri S., Ritola T., A framework for Building Dimensionless behavioral models for function-based failure propagation Analysis, ASME Journal of Mechanical Design, Vol.133, Iss.12, 2011 (DOI: 10.1115/1.4005230). [16] Brace W., Coatanéa E., Kauranne H., Heiska M., Formalization Approach to Early Design Synthesis, International journal of design and innovation research, vol. 5, issue 2, pages 25-45, June 2011. [17] Christophe F., Coatanéa E., Bernard A., RFBS: A model for knowledge representation of Conceptual product development CIRP Annals Manufacturing Technology, Elsevier, 2010. [18] Yannou B., Coatanéa E., Fixing targets and evaluating design alternatives by pairwise comparisons, The COMPARE method, Revue d'Ingénierie Numérique Collaborative, 2009, 1, No. 1-2, pp. 145-163. [19] Medyna G., Nordlund H., Coatanéa E., Study of an exergy method for environmental evaluation assessment in the early design phase using comparative LCA and exergy approach, Int. J. Design Engineering, Volume 2, Number 3 / 2009, 320 - 345. [20] Yannou B., Coatanéa E., The COMPARE method for easy and fast specification and design selection by product pairwise comparisons, In Revue internationale d’ingénierie numérique, Conception Collaborative et Ingénierie Numérique, Hermès Science Lavoisier, ISSN 0298-0924, 2008. [21] Christophe F., Sell R., Coatanéa E., Conceptual product development framework supported by Dimensional Analysis and System Modelling Language, Estonian Journal of Engineering, ISSN 1736-6038, 2008. [22] Coatanéa E., Kuuva M., Nordlund H., Makkonen P. E., Saarelainen, T., A uniform environmental metric based on exergy for early design evaluation, Int. J. of Env. Cons. Des. & Man., Vol. 13, No.2, ECM Press, Albuquerque, New Mexico, 2007. Journal articles (submitted) [23] Woldemariam E. T., Wang G.G., Coatanéa E., Wu D., Lemu H. G., DACM and numerical simulation based optimization of micro cross-flow turbine for an improved performance, Journal of Optimization Theory and Applications (JOTA), 2018 (submitted). [24] Wu D., Coatanéa E., Wang G.G., Employing knowledge on causal relationship to assist multidisciplinary design optimization, ASME Journal of Mechanical Design, 2018 (submitted). Journal articles (To be submitted)

Page 3

[25] Välimäki E. Coatanéa E., Modelling for Cold Metal Transfer: An Application For Additive Manufacturing, Transactions of the ASME, ASME Journal, Journal of Manufacturing Science and Engineering, (to be submitted 2018). [26] Coatanéa E., Mokhtarian H., A Predictive Method to Assess Additive Manufacturing Systems for Direct Component Manufacturing, Transactions of the ASME, ASME Journal, Journal of Manufacturing Science and Engineering, (to be submitted 2018). [27] Coatanea E., An Early Modelling and Simulation approach for Fast evaluation of early design concepts, Journal of Engineering Design, (to be submitted 2018). [28] Coatanéa E., Technology Selection Method: A New Approach identifying Relevant Technology Alternatives during a Product Family Design, Journal of Computing and Information Science in Engineering, ASME journal, (to be submitted 2018). [29] Coatanéa E., Feasible solutions exploration at early design stage using DSM, Engineering Applications of Artificial Intelligence, (to be submitted 2018). [30] Coatanéa E., Medyna, G., Mbeo Ogeya C., Ritola T., Bakhouya, M. Early design stage support using a systemic perspective: Sustainable design of a pyrolitic stove eco-system, Journal of Cleaner Production, Elsevier (to be submitted 2019). Scientific reports [31] Towards a simulation based product process, SIMPRO research project final report, VTT Technology 240, ISBŃ 978-951-38-8379-9́ (http://www.vttresearch.com/impact/publications), 2015. [32] Coatanéa E., Dimensional Analysis Conceptual Modelling (DACM): a comprehensive framework for specifying, validating, and analysing system models from a Model-based System Engineering perspective, US Department of Defence, NAWCTSD office, Contract Reference: SOW 4.5, 4.5.1, 2015 (report not released). [33] Coatanéa, E., Mokammel, F., Christophe, F., Requirements model for Engineering, Procurement and interoperability: A graph and power laws vision of requirements engineering, 2013, Finnish Defence Force (MATINE program), ISSN1797-3457, ISBN(PDF)978-951-25-2530-0, http://www.defmin.fi/files/2727/840_Coatanea_tiivistelmaraportti_2013.pdf [34] Mokammel, F., Coatanéa, E., Bakhouya, M., Christophe, F. & Medyna, G., Methodology for quality grade and change impact analysis of requirements, 2012, Finnish Defence Force (MATINE program), ISSN 1797-3457, ISBN (PDF) 978-951-25-2415-0, http://www.defmin.fi/files/2353/MadeByGraph_MATINE_Summary_Report_Aalto _University.pdf Book sections [35] Christophe F., Coatanéa E., Bernard A., Conceptual Design, The International Academy for Production Engineering (ed.), CIRP Encyclopedia of Production Engineering, DOI 10.1007/978-3-642-20617-7, 2018.

Page 4

[36] Conceptual Design, Christophe F., Coatanéa E., Bernard A., Perry N., CIRP Encyclopedia of Production Engineering, 2016. [37] Coatanéa E., Choulier D., Forest J., Medyna G., Christophe F., Bakhouya M., Creativity from Design and Innovation Perspectives, Volume on creativity of the Encyclopedia on creativity, invention, innovation and entrepreneurship, Elsevier, 2012. [38] Research in Interactive Design, Volume 2, Article: Sustainability analysis of the product development life cycle using a metric based on exergy, SpringerVerlag, ISBN-10:2-287-48363-2, 2006. Conference proceedings [39] Coatanea E., Tsarkov V., Modi S., Wu D., Wang G., Jafarian H., Knowledgebased artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNS, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2018, August 26-29, 2018, Quebec City, Quebec, Canada [40] Nagarajan H., Jafarian H., Azarakhsh H., Mokhtarian H., Prod’hon R., Tilouche S., Coatanea E., Nenchev V., Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2018, August 26-29, 2018, Quebec City, Quebec, Canada [41] Coatanea E., Mokhtarian H., Roca R., Dimensional Analysis Conceptual Modeling supporting Additive Manufacturing, Interservice/Industry Training, Simulation, and Education Conference (I/ITSEC), Orlando, USA, 2018. [42] Roca R., Coatanea E., Dimensional Analysis Conceptual Modeling in Simulation-Based Training-for-Adaptability, Interservice/Industry Training, Simulation, and Education Conference (I/ITSEC), Orlando, USA, 2018. [43] Roca R., Coatanea E., Toward Dimensional Analysis Conceptual Modeling for Reusable Modeling Primitive Specification, Interservice/Industry Training, Simulation, and Education Conference (I/ITSEC), Orlando, USA, 2018. [44] Vareille J., Coatanéa E., Une proposition de méthode pour une Écoconception innovante et créative, Congrès National de la recherche en IUT (CNRIUT'2017) : 4-5 MAI 2017, Auxerre. [45] Wu D., Coatanéa E., Wang G.G., Leveraging causal graph and dimensional analysis for optimization of aircraft concept design, Proceedings of the ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDECT/CIE2017, August 6-9, 2017, Cleveland, Ohio, USA. [46] Ellman, A., Pajunen S., Laine I., Coatanéa E., Engineering Design Analysis Tool for Early Design Phase With Low Fidelity Models- A Case of Hydraulic Crane, Proceedings of the ASME 2017 International Design Engineering Technical

Page 5

Conferences & Computers and Information in Engineering IDECT/CIE2017, August 6-9, 2017, Cleveland, Ohio, USA.

Conference,

[47] Mokhtarian H., Coatanéa E., Paris H., Ritola T., Ikkala K., Vihinen J., Koskinen K., Ellman A., A Network Based Modelling Approach using the Dimensional Analysis Conceptual Modelling (DACM) Framework for Additive Manufacturing Technologies, Proceedings of the ASME International Design Engineering Technical Conferences IDETC16, August 21-24, 2016, Charlotte, North Carolina, USA. [48] Ritola T., Coatanéa E., Paris H., Micaelli J.P., Ritola T., A framework for building behavioral models of technical and economic systems, Proceedings of the ASME International Design Engineering Technical Conferences IDETC16, August 21-24, 2016, Charlotte, North Carolina, USA. [49] Ikkala K., Kiviö J., Mokhtarian H., Vainionpää M. and Coatanéa E., Characterization of the cutting parameters to the machine tool input power, 26th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2016, June 27-30, 2016, KSTC, Seoul [50] Coatanéa E., Ryynänen L., Calonius O., Mokammel F., Riitahuhta A., Systematic search and ranking of physical contradictions using graph theory principles: Toward a systematic analysis of design strategies and their impacts. World Conference: TRIZ FUTURE, TF 2011-2014, Procedia Engineering, 2015, Published by Elsevier B.V. [51] Kumar Gupta R., Coatanéa E., Roca R., Bernard A., Functional Modelling to Bond Graph Organs: Move from Problem Space to Solution Space for Supporting the Specification of Models in the Modelling and Simulation Context, 5th International Conference on Product Life Cycle Modelling Simulation and Synthesis, December 15-17, 2015, Hyderabad, India. [52] Ikkala K., Lanz M., Kiviö J., Coatanéa E., Energy Efficiency Evaluation Method for Machine Tools, The International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 23 - 26 June 2015 at the University of Wolverhampton, UK, 2015. [53] Flores Ituarte I., Coatanea E., Salmi M., Tuomi J., Partanen J., Additive Manufacturing in Production: A Study Case Applying Technical Requirements, 15th Nordic Laser Materials Processing Conference, Nolamp 15, 25-27 August 2015, Lappeenranta, Finland, Physics Procedia (2015), Physics Procedia, Volume 78, 2015, Pages 357-366, Published by Elsevier B.V. [54] Chapuis Y., Demoly F.; Coatanéa E., Gomes S., Product upgradability: Towards a medical analogy, APMS 2014 International Conference, Advances in Production Management Systems, September 20-24, 2014, Ajaccio, France. [55] Bernard A., Coatanéa E., Christophe F., Laroche F., Design: a key stage of product lifecycle, 24th CIRP Design Conference, Procedia CIRP 2014, 2212-8271, Published by Elsevier B.V. [56] Coatanéa E., Nonsiri S., Christophe F., Mokammel F., Graph based representation and analyses for conceptual stages, Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and

Page 6

Information in Engineering Conference, IDETC/CIE 2014,August 17-20, 2014, Buffalo, New-York, USA. [57] Coatanéa E., Nonsiri S., Mokammel F., Christophe F., Contradiction graph search: A tool for discovering physical contradictions, Proceedings of TMCE 2014, May 19-23, 2014, Budapest, Hungary, Edited by I. Horváth, Z. Rusák, Organizing Committee of TMCE 2014, ISBN 978-94-6186-177-1. [58] Coatanéa E., Ryynänen L., Calonius O., Mokammel F., Riitahuhta A., Systematic search and ranking approach for physical contradictions using graph theory principles: Application to the case of an air bearing, TRIZ Future Conference 2013, Ecole Nationale Supérieure d’Arts et Métiers, France, 2013. [59] Christophe F., Mokammel F., Coatanéa E., Bakhouya M., Integration of evaluation and simulation methods for virtual prototypes, International Conference on Engineering and Product Design Education, 5-6th September 2013, Dublin Institute of technology, Dublin, Ireland. [60] Nonsiri S., Coatanéa E., Bakhouya M., Mokammel F., Model-Based Approach for Change Propagation Analysis in Requirements, 2013 IEEE International Systems Conference, Florida, Orlando, April 15-18, 2013. [61] Mokammel F., Coatanéa E., Christophe F., Bakhouya M., Nonsiri S., Impact Analysis of Graph-based Requirements Models using PageRank Algorithm, 2013 IEEE International Systems Conference, Florida, Orlando, April 15-18, 2013. [62] Ritola, T., Coatanéa, E., Interplay Between Offering, Provider and Customer in Product-Service System Design, International Conference on Engineering Design, ICED13, 2013. [63] Mokammel F., Coatanea E., Ba Khouya M., Christophe F., Medyna G., Towards an Approach for Evaluating the Quality of Requirements. ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013) Portland, Oregon, USA. [64] Ogeya, Mbeo Calvince; Coatanéa, Eric; Galina Medyna, Theory Driven Design and Real Prototyping of Biomass Pyrolitic Stove, Proceedings of the conference ICED 2013, Seoul, Korea, 2013. [65] Ritola T., Coatanéa, E., Combining product innovation with service innovation to increase value created with a system, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition IMECE2013, November 13-21, 2013, San Diego, California, USA. [66] Sirin G., Coatanea, E, Yannou B., Landel E., Creating a domain ontology to support the numerical models exchange between suppliers and users in a complex system design, Proceedings of the ASME 2013 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference IDETC/CIE 2013August 4-7, 2013, Portland, Oregon, USA. [67] Sirin G., Yannou B., Coatanéa E., Landel E., Architecture-centric design for a collaborative plat-form of distributed simulation system, International Conference on Research into Design ICoRD ’13 Global Product Development Indian Institute of Technology Madras, 7-9 January 2013, Chennai, India. [68] Sirin G., Yannou B., Coatanéa E., Landel E., Analyse of the Simulation System in an Automotive Development Project, in proceedings of Complex Systems Design & Management (CSD&M) 2012, Paris, France. [69] Ait-Cheik-Bihi W., Bakhouya M., Gaber J., Outbib R., Coatanea E., Gao X. Z., Zenger K., Towards an Integrated Service-oriented Energy Management Platform

Page 7

for Plug-in Hybrid Electric Vehicles, in proceedings of 2nd IFAC Workshop on Multivehicle Systems, 3–4 October 2012, Espoo, Finland. [70] Coatanea E., Nonsiri S., Bakhouya M., Kiviluoma P., Calonius O., An Early Modeling and simulation approach for fast evaluation of Early design concepts, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, August 12-15, 2012, Chicago, IL, USA. [71] Nonsiri S., Coatanea E., Bakhouya M., A discrete differential evolution Algorithm for Product Development Scheduling, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, August 12-15, 2012, Chicago, IL, USA. [72] Medyna, G., Coatanéa, E., and Millet, D, Environmental and economic evaluation of solar thermal panels using exergy and dimensional analysis. In Glocalized Solutions for Sustainability in Manufacturing, J. Hesselbach and C. Herrmann, Eds. Springer Berlin Heidelberg, 2011, pp. 647-651. [73] Medyna, G., Coatanéa, E., and Millet, D, Evaluation of parts of a boat cabin based on exergy - focusing on environmental and economic assessments. In Proceedings of the ASME International Mechanical Engineering Congress 2011, Denver, CO, USA, 2011. [74] Christophe, Francois; Ritola, Tuomas; Coatanéa, Eric; Bernard, Alain; Semantic Analysis of Function-Solution Duality, ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011, Denver, Colorado, USA, November 11-17, 2011. [75] Coatanéa E., Choulier D., Forest Joelle, CK, An Engineering Design Theory? Contributions, limits and proposals, International conference on Engineering Design, ICED11, 15 - 18 August 2011, Technical University of Denmark. [76] Seppälä M., Buda A., Coatanéa E., Selection of Design concepts Using Virtual Prototyping in the Early Design phases, International conference on Engineering Design, ICED11, 15 - 18 August 2011, Technical University of Denmark. [77] Christophe F., Coatanéa E., Wang. M., Zeng Y., Grammatical and Semantic Disambiguation of Requirements at Elicitation and Representation Stages, Proceedings of the 23nd International Conference on Design Theory and Methodology DTM, August 29-31, 2011 in Washington DC, USA. [78] Medyna G., and Coatanéa E., Decision making and value considerations during the early stages of engineering design. In Global Product Development: Cirp Design Conference 2010, A. Bernard, Ed. Springer Berlin Heidelberg, 2010, pp. 397-402. [79] Choulier D., Forest Joelle, Coatanéa E., Engineering design CK theory: contributions and limits, Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 15-18, 2010 in Montréal, Quebec, Canada. [80] Medyna G., Coatanéa E., Lahti L., Creative processes In engineering: an analogy with the evolution of wikipedia articles, Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 1518, 2010 in Montréal, Quebec, Canada. [81] Coatanéa E., Ritola T., Tumer I., Jensen D., A framework for Building behavioral models for design-stage failure identification using Dimensional

Page 8

Analysis, Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 15-18, 2010 in Montréal, Quebec, Canada. [82] Medyna G., Coatanéa E., Lahti L., Howard T., Brace W., Christophe F., Creative design: An initial analysis and ontology, submitted to MCPC 2009 (Mass Customization and Personalization Conference 2009), Helsinki, Finland. [83] Brace W., Coatanéa E., Kauranne H., Heiska M., Early design modelling and simulation of behaviours: case study of mobile work machine, CPI 2009, October 19-21 2009 in Rabat, Marroco, 2009. [84] Ritola T., Alizon F., Coatanéa E., Implementing Mass Customization through Product and Service Platform Strategy” submitted to MCPC 2009 (Mass Customization and Personalization Conference 2009), Helsinki, Finland. [85] Medyna G., Coatanéa E., Millet D., Comparative study of environmental evaluation

assessment using exergetic LCA implemented in existing software and a novel exergetic approach during the early design phase, ICED'09, Stanford university, Stanford, CA, USA, 24 - 27 August 2009.

[86] Christophe F., Sell R., Bernard A., Coatanéa E., OPAS: Ontology processing for assisted synthesis of conceptual product development solutions, ASME- IDETC 2009, August 30 - September 2, 2009 in San Diego, California, USA, 2009. [87] Brace W., Coatanéa E., Kauranne H., Heiska M., Early design modelling and simulation of behaviours: case study of mobile work machine, ASME- IDETC 2009, August 30 - September 2, 2009 in San Diego, California, USA, 2009. [88] Brace W., Coatanéa E., Semi formal requirement formulation in system engineering, ICED'09, Stanford university, Stanford, CA, USA, 24 - 27 AUGUST 2009. [89] Coatanéa E., Alizon F., Christophe F., Yannou B., Selecting technology alternatives for product families through technological coverage and functional verification, In Proceedings of ASME design engineering technical conferences DETC 2008, New-York, USA, 2008. [90] Sell, R.; Coatanéa, E., Christophe, F., Important Aspects of Early Design in Mechatronic, 6th International DAAAM Baltic Conference on Industrial Engineering, Tallinn, Estonia, 24-26 April 2008. [91] Nordlund H., Medyna G., and Coatanéa E., Study of an exergy method for environmental evaluation assessment in the early phase using comparative LCA and exergy approach. IDMME conference 2008, Beijing. [92] Christophe F., Sell R., Coatanéa E., Micaëlli J.P., Integrated design framework: Towards an approach for early design. International conference on engineering and product design education, UPC, Barcelona, Spain, 4 & 5 September 2008. [93] Coatanéa E., Yannou B., Honkala S., Saarelainen T., Makkonen P. E., Lajunen A., Measurement theory and dimensional analysis: methodological impact on the comparison and evaluation process, In Proceedings of ASME design engineering technical conferences DETC 2007, Las Vegas, USA, 2007. [94] Yannou B., Coatanéa E., The COMPARE method for easy and fast specification and design selection by product pairwise comparisons, In Proceedings of CPI 2007, 5th internationale conference in Integrated Design and Production, Rabat, Morocco, 2007.

Page 9

[95] Coatanéa E., Vareille J., Yannou B., Measurement theory and dimensional analysis, In Proceedings of CPI 2007, 5th International conference in Integrated Design and Production, Rabat, Morocco, 2007. [96] Coatanéa E., Yannou B., Boughnim N. , Makkonen P. E., Lajunen A., Saarelainen T., Bertoluci G., Combining analysis of different performances through the use of Dimensional Analysis. In proceedings of International Conference on Engineering Design, ICED’07, Cité des Sciences et de l'Industrie, Paris, France, 28 - 31 august 2007. [97] Yannou B., Coatanéa E., Easy and flexible specifications and product evaluations by expert and customer comparisons with existing products, In proceedings of International Conference on Engineering Design, ICED’07, Cité des Sciences et de l'Industrie, Paris, France, 28 - 31 august 2007. [98] Coatanéa E., Kuuva M., Makkonen P.E., Saarelainen T., Early design evaluation of products artifacts’: An approach based on dimensional analysis for combined analysis of environmental, technical and cost requirements, Proceedings of the 14th CIRP International Conference on Life Cycle Engineering Conference, Tokyo, Japan, June 11th-13th, 2007. [99] Saarelainen, T., Makkonen, P., Coatanea E., Industrial study of cast part development. In proceedings of International Conference on Engineering Design, ICED’07, Cité des Sciences et de l'Industrie, Paris, France, 28 - 31 august 2007. [100] Jokinen, J.; Makkonen, Petri; Saarelainen, Tanja; Coatanea, Eric: A strategy for cast part shape design. Proceedings of the 16th International Conference on Engineering Design ICED'2007, Paris, France, August 28-31, 2007. 12 p., Paris, France, 28 - 31 august 2007. [101] Saarelainen, T., Piha, O., Makkonen, P., Coatanea, E. and Orkas, J., Current and future practices in Finnish foundry industry - questionnaire study. Proceedings of the 47th International Foundry Conference. Portoro, Slovenia, September 12-14. Organised by Slovenian foundrymen society, 2007. [102] Coatanéa E., Kuuva M., Makkonen P. E., Saarelainen T., Castillón-Solano M. O.. Analysis of the concept of sustainability: definition of conditions for using exergy as a uniform environmental metric. Proceedings of the 13th CIRP International Conference on Life Cycle Engineering Conference, Leuven, Belgium, May 31st-June 2nd, 2006. [103] Coatanéa E., Makkonen P. E., Saarelainen T., Castillón-Solano M. O., A Generic synthetic Framework for conceptual Service design, Proceedings of the 9th International Design Conference- Design 2006, Dubrovnik - Croatia, May 15 18, 2006. [104] Coatanéa E., Makkonen P. E., Saarelainen T., Castillón-Solano M. O., Cost modelling analysis in sand casting foundry. Proceedings of NordDesign 2006, Reykjavik –Island, August 16-18, 2006. [105] Vareille J., Coatanéa E., Un modèle nouveau de cycle de vie pour la préconception. Proceedings of the 12th French Congress of Research in IUT, Brest – France, June 1-2, 2006. [106] Makkonen P., Castillon-Solano M.O., Coatanea E., Saarelainen T., A strategy for Cast Part Design Process Optimisation: Part I: Customer Inquiry Specification, NordDesign 2006, August 16-18, Reykjavik, Island, 2006. [107] Coatanéa, Eric; Kuuva, Markku; Nordlund, Harri; Makkonen, Petri E.; Saarelainen, Tanja: Sustainability analysis of the product development life cycle Page 10

using a metric based on exergy. Proceedings of Virtual Concept 2006, Playa Del Carmen, Mexico, Springer-Verlag, 8 p., [CD-ROM], November 26 - December 1, 2006. [108] Coatanéa E, Vareille J, L’analyse dimensionnelle, un outil puissant de modélisation du cycle de vie en phase de préconception, Proceedings of the 11th French Congress of Research in IUT, Nice, France, June, 2005. [109] Coatanéa E, and Vareille J, A life cycle modelling for the conceptual design stage using dimensional analysis approach, In Proceedings of ASME design engineering technical conferences DETC 2004, Salt Lake City, USA, 2004. [110] Coatanéa E., Vareille J., A new life cycle model for the conceptual design process, In Proceedings of NordDesign’04, Tampere, Finland, 2004. [111] Coatanéa E., Vareille J., Towards a life cycle model for the conceptual design process, In Proceedings of IDDME 2004, Bath, UK, 2004. [112] Coatanéa E., Vareille J., Dimensional analysis as a cooperative tool for the life cycle modelling during the conceptual design stage, Workshop on design engineering research, University of West Brittany, 2004. [113] Coatanéa E., Vareille J., Design education theory revisited through a generalisation of the use of dimensional analysis theory and a new multilevel design model, Workshop on design engineering research, University of West Brittany, 2004. [114] Coatanéa E., Vareille J., Méthodologie pour l’éco-conception, Journées AUMAFM, Brest, 2004. [115] Coatanéa E, Vareille J., Kuuva M., Utilisation d'indicateurs sans dimension pour l'analyse des problèmes multi-contraintes et multi objectifs en préconception, in Proceedings of CFM 2003, Nice, France, 2003. [116] Coatanéa E; Vareille J., Kuuva M. , Applying dimensionless indicators for the analysis of multiple constraints and compound objectives in conceptual design., 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece, August 17-22, 2003.

Scientific books (monographs) [117] Global Product Development: Proceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th-21st April 2010. [118] Printed Electronic- Now and Future, Chapter of the book Bit Bang: Rays to the future, Helsinki University Print, 2009, ISBN (pbk) 978-952-248-078-1. [119] Wide Wide World-Globalized Regions, Industries and Cities, Chapter of the book Bit Bang: Rays to the future, Helsinki University Print, 2009, ISBN (pbk) 978-952-248-078-1. [120] Integrated systems and design, Interstudy teaching text book, ISBN 9789955-20-332-2, 2008. [121] Hands-on lab exercises, Interstudy hands-on book, ISBN 978-9955-20-340-7, 2008.

Doctoral thesis

Page 11

[122] Coatanéa E., Conceptual Modelling of Life Cycle Design: A Modelling and Evaluation Method Based on Analogies and Dimensionless Numbers, PhD dissertation, ISBN 951-22-7853-7, ISBN 951-22-7852-9, 2005.

Other publications Publications intended for professional communities [123] Coatanéa E., Rapid prototyping, presentation and usage (In French), Institut Universitaire de Technologie de Brest, Département de Génie Mécanique et Productique, 1998. [124] Coatanéa E., Sheet metal forming and cutting (In French), Institut Universitaire de Technologie de Brest, Département de Génie Mécanique et Productique, 1997. [125] Coatanéa E., Manufacturing and cutting methods (In French), Institut Universitaire Professionnalisé de Brest, Département de Génie Mécanique et Productique, 1997. [126] Coatanéa E., Functional dimensioning of mechanical parts (In French), Institut Universitaire Professionnalisé de Brest, Département de Génie Mécanique et Productique, 1997. [127] Coatanéa E., Fixture system design for machining equipments (In French), Institut Universitaire Professionnalisé de Brest, Département de Génie Mécanique et Productique, 1997. [128] Coatanéa E., Milling methods: Generalities (In French), Institut Universitaire Professionnalisé de Brest, Département de Génie Mécanique et Productique, 1996. [129] Coatanéa E., Production management methods (In French), Institut Universitaire Professionnalisé de Brest, Département de Génie Mécanique et Productique, 1995. [130] Coatanéa E., Design of an innovative deep sea oil platform concept using

floating anchors: A mathematical model of the behaviour of the anchor lines under sinusoidal swell (In French), technical report, IFREMER research

laboratory, Brest, France, 1994. [131] Coatanéa E., Design guidelines for mechanical design transmissions parts of airborne radars systems (In French), (Guide of Guide de conception des systèmes de transmission mécaniques pour radar embarqués), Rapport technique, Thalès (ex.Thomson-CSF), Brest, France, 1994. [132] Coatanéa E., Finite element simulation and design guidelines for multi-layer printed boards Copper-Invar-Copper (In French), (Guide de conception et simulation éléments finis des effets des contraintes thermiques sur des circuits imprimés multi-couches Cuivre-Invar-Cuivre), Technical report and course material, Thalès (ex. Thomson-CSF), Brest, France, 1994.

Publications intended for the general public

Page 12

[133] Marie Curie Book, Project success story, Chapter: Seeding careers/career development, Eric Coatanéa (published by EU commission), 2009.

Invention disclosures [134] Rapidly reconfigurable pattern, mold or core (invention disclosure) [135] A low consumption air bearing (invention disclosure) [136] A maintenance optimized modular roller conveyor (invention disclosure)

Non-refereed scientific articles [137] Coatanéa E; Vareille J., Kuuva M. , Applying dimensionless indicators for the analysis of multiple constraints and compound objectives in conceptual design., 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece, August 17-22, 2003. [138] Coatanéa E; Vareille J., Kuuva M. , Applying dimensionless indicators for the analysis of multiple constraints and compound objectives in conceptual design., 5th Euromech Solid Mechanics Conference, Thessaloniki, Greece, August 17-22, 2003.

Page 13