Medistrings Bed Head unit (energy carrier ) - 2

Medistrings Bed Head unit (energy carrier ) Bed head units (energy carriers) are designed to provide a convenient and flexible supple of electrical power. Lighting, medical gases and communications to the head of the hospital bed. The bed head unit is mounted on the wall by mounting fixtures and may be connected to an interface box which is installed in the wall during the pipeline installation phase. Jupiter model is offered in two standard lengths and for a single bed configuration: • •

1.00 mtr long 1.5 mtr long

Non-standard length of duct and for more than one bed may be offered as a special request.

Features • • • • • • • • • •

Two separated ducts for electrical connection and Gas connection. End covers. Snap in front covers. Wall mounting fixtures. Natural anodize or baked painted with various colors panels. Equipped with all neceassary outlets and receptacles on its front surface. Optionall integrated hanging rails 25x10 mm for increased equipment management. Optional additional lower duct for intensive care applications. Customized to meet all needs. Optional recessed interface box w or w/o valves.

Technical Data:

• • • • • • • • • • • • •

Materials:exruded baked aluminum ducts. Electrical power:electric socket (20v/13 amps or 240v/16amps). Type:American, Britishm, German, Euro standard and other. Lighting options:Reading light & room light. Examination light (supplied separately). Light ON/OFF switch. Communication options:Telephone socket. Monitor socket (RJ45). Nurse call. Intercom. Hanging rails (optional):On the upper sides of the bed head unit. Dimensions:25x10mm. External pipe connection:From side and (exposed), from upper end (exposed).

•

Recessed pipe connection. Copper pipe connection type "K".

•

Applicable standards:NFPA99.EN737-3.

Technical Data Max.load

G2 max160kg(See note 1)

Arm length

R2 650mm R3 600mm R4 800mm

Rotation angle

W2, max 2700 W3, W4 3400

Console distance from floor is adjustable in accordance with ceiling height. Ball bearings are maintenance free. Weight

273kg

Electrical sockets

Up to 12units each console

Equipotential pins

Up to 12 units on each console

Gas Outlets

Up to 8units in each console

Console Length

1000 mm

The single overhead suspension arm offers: • • • • • • • • •

Procedures and tasks easily adapted. Reduction of work and personal movement it attained. Good designed allows for overall overview. Easy moving and positioning. Locked position. Maximum access around the patient. Concealed cable and tubes. Reduced space requirements, unlimited equipment combinations. Practically all accessories are detachable and interchangeable.

With its modular design and high load capacity the i arm unit can carry a variety of instrument for the ICU like:Respirators and Monitors. Parctical Desigin Pneumatic or mechanical brakes in the bearing assemblies prevent inadvertent creeping movement. Pneumatic brakes control are installed on console via to push buttons. Locking and releasing of arm is achieved by pressing and releasing the buttons. The overhead suspension arm meet the requirement of EN 793 and EN 737-3.