Page 1 of 2. Features. • A high-capacity, fiber optic receive node for distributing
up to four satellite feeds through a single-mode fiber passive optical network ...
ODP-4ST Optical Node A Compact Optical Satellite L-Band Distribution System Features • • • • •
A high-capacity, fiber optic receive node for distributing up to four satellite feeds through a single-mode fiber passive optical network (PON) Provides flexible commercial installations distributed over fiber optic cable rather than coaxial cable. Supports a variety of node network sizes. Simplifies installation and overall equipment needs using standard commercial dish antennas and residential hardware. Distributes up to four satellite feeds providing access to more channels available than in typical commercial installations, including complete lineups of high-definition programming and Video-On-Demand content.
Instructions • Use the ODP-4ST with a Dish Optical Network 4 Sat Headend (part number 161299) or the Fiber Stacker, 4 Sat (part number 161563). • Use the outputs of the ODP-4ST with a Dish Pro or a Dish Pro Plus series switch or to extend L-Band DP trunks.
Installation Considerations • • • • •
Carefully review safety and installation instructions prior to using this product. The optical network headend (part number 161299) uses a Class 3b laser. The fiber stacker (part number 161253) uses a Class 1 laser. Standard PON splitters may be used between the optical headend device and the ODP-4ST devices. Different optical system loss budgets need to be taken into account when using the two optical headend options. If full PONs are not used, equivalent optical loss must be added to prevent damage to the ODP-4ST and/or ODPP-43.
OPTICAL DISHPRO MODEL ODP-4ST 175487 (via fiber network)
To Distribution System (Trunk Outputs)
POWER ANY PORT
MADE IN CHINA
TRUNKED OUTPUT LNB 1 [1530u]
TRUNKED OUTPUT LNB 2 [1530c]
TRUNKED OUTPUT LNB 3 [1550c]
TRUNKED OUTPUT LNB 4 [1550u]
TO FIBER NETWORK
1
2
3
4
5
Page 1 of 2
ODP-4ST Optical Node A Compact Optical Satellite L-Band Distribution System Headend Processor System
Up to 64 node network (PN 161563) Up to 512 node network (PN 161299) ODP-4ST or ODPP43 Single-Mode Fiber
Band Translating Switch Used with dual-tuner/single cable installs Separator (BTSS) Approximate Dimensions 8.75” x 5.75” x 1.35” (in inches H x W x D) Input Signal
SUBSCRIBER UNIT
Optical Multiplexer
Input Connectors Output Output Connectors Output Optical Power System Power
Status and Monitoring
Input Input Connector Input Optical Power Output System Power System Optical Budget
Up to four 950-2150 MHz dual-polarity orbital locations Four female F-connectors One dual wavelength (1530/1550 nm) single-mode fiber output One FC/UPC female single-mode fiber connector +5 dBm total (+2 dBm each wavelength) (PN 161563) +23 dBm total (+20 dBm each wavelength) (PN 161299) 120V AC Part Number 161299 • LED indicators (system DC power and optical alarms) • Optical power output monitor port Part Number 161563 • None One dual wavelength (1530/1550 nm) single-mode fiber One FC/UPC female single-mode fiber connector -13 dBm +/- 3dB Four female F-connector ports, DP stacked 950-2150 MHz The line is powered by a DP or DPP switch. An AC power adapter is required for trunked application without DP or DPP switches. 12 dB nominal (PN 161563) 30 dB nominal (PN 161299)
* The 64 node or 512 node networks can consist of both ODP-4ST and ODPP- 43 devices in any combination up to the node size limit.
