OPEL TIGRA 2004. 28.36. LOCATION OF THE CAR ALARM CONTROL UNIT.
Compact control units and sirens: place under the bonnet on the wheel box on
the ...
OPEL TIGRA 2004
28.36
LOCATION OF THE CAR ALARM CONTROL UNIT Compact control units and sirens: place under the bonnet on the wheel box on the driver’s side. Modular control units and accessories: place under the dashboard on the driver’s side. ------------------------------------------------------------------------------------------------------------------------------------------------------CAR ALARM SUPPLY Positive: Connect to the Red wire (pos. n°37) in the Black/Dark Blue 47-pin connector located on the control unit under the bonnet on the driver’s side under the housing for the windscreen wipers. Negative: Connect to the manufacturer’s original setting located in the heel rest on the driver’s side. ------------------------------------------------------------------------------------------------------------------------------------------------------IMMOBILISER Starter motor: cut the Black/Yellow wire in the cable to the ignition key unit. ------------------------------------------------------------------------------------------------------------------------------------------------------ODOMETER Connect to the Dark Blue/Red wire (pos. n° 5) in the car radio’s ISO connector. ------------------------------------------------------------------------------------------------------------------------------------------------------POSITIVE IGNITION KEY (+15) Connect to the Black/Purple wire (pos. n°4) in the grey relay located on the control unit under the bonnet on the driver’s side under the housing for the windscreen wipers. -----------------------------------------------------------------------------------------------------------------------------------------------------CENTRAL DOOR LOCKING (Connection with radio frequency remote controlled alarm) Negative type control. Connect to the Brown/Red wire for locking and to the Brown/White wire for unlocking located in the cables that exit the driver’s door. ----------------------------------------------------------------------------------------------------------------------------------------------------ARMING OF PASSIVE TYPE ALARM (Connection with alarm armed by vehicle’s original remote control) Follow the method of connections in INSTALLATION FILE 28.36.1 -----------------------------------------------------------------------------------------------------------------------------------------------------DIRECTION INDICATORS Connect to the Black/Green wire (pos. n°10) and to the Black/White wire (pos. n°9) located in the black/green 52-pin connector on the control unit under the bonnet on the driver’s side under the housing for the windscreen wipers. ------------------------------------------------------------------------------------------------------------------------------------------------------DOOR PROTECTION Connect to the Grey/White wires (pos. n° 30, front left) and to the Grey wire (pos. n° 49, front right and rear) in the 59-pin connector on the control unit under the bonnet on the driver’s side under the housing for the windscreen wipers. (see diagram of the control unit under the bonnet in installation file 28.36.1) Separate the lines with diodes. ------------------------------------------------------------------------------------------------------------------------------------------------------BONNET/BOOT PROTECTION Bonnet: Fit the switch provided. Boot: Connect to the Brown/White wire (pos. n°8) in the 59-pin connector located on the control unit under the bonnet on the driver’s side under the housing for the windscreen wipers. (see diagram of the control unit under the bonnet in installation file 28.36.1) ------------------------------------------------------------------------------------------------------------------------------------------------------ELECTRIC WINDOWS The windows are lifted with the comfort function by lengthening the time for closing to 25” on the Brown/Black wire located in the cable that exit the driver’s door. Follow the diagram below.
Control of closing
To vehicle’s Brown/Red wire (closing)
Meta ALARM To vehicle’s Brown/Black wire (comfort)
09/11/2004 rev.00
OPEL TIGRA 2004
28.36.1
METHOD OF INSTALLATION FOR M750/3 – HPB2 FUNCTION
COLOUR OF M750/HPB2 WIRE
COLOUR OF WIRE ON VEHICLE
Control of arming
RED/BLACK
BLACK/RED (Motor positive for locking)
Control of disarming
RED /WHITE
BLACK/YELLOW Motor positive for unlocking)
Inhibition
LIGHT BLUE/ YELLOW
BROWN/WHITE (blinker negative for unlocking/locking)
Inhibition
RED / YELLOW
POSITION OF WIRE ON VEHICLE
Located in the bundle of cables that exits the driver’s door.
Yellow relay n°1. See diagram of control unit under bonnet.
DO NOT CONNECT
Grey relay 1
Grey relay 3
59 –pin Conn.
Grey relay 2
Grey relay for connection of +15
Yellow relay 1
09/11/2004 rev.00
Black/Green 52pin connector
Vacant
DIAGRAM OF CONTROL UNIT UNDER BONNET ON DRIVERS SIDE (under housing for windscreen wiper on driver’s side)
Black/Dark Blue 47-pin connector
Vacant
Black/Grey 52-pin connector
N.B. For the HPB2 alarm, set the product for G.M. controls (see procedure at point 1 in the fitting instructions)