The RR Plug Seal Vario consists of an elastic, halogen-free, highly fire- resistant
... 125mm. 125-128mm. RR-150/vario. 150mm. 150-154mm. RR-200/vario.
bst-fi r e s top.com
M3.RR.05
Plug Seal Type RR-Vario Design The RR Plug Seal Vario consists of an elastic, halogen-free, highly fireresistant elastomeric rubber (bst-HFE), with bolts and fittings made from galvanized steel, or alternatively from high-grade steel A4, material 1.4571 (AISI 316Ti). Bolts can be supplied optionally also with Nyloc nuts, galv. or high-grade steel. For non-fire resistant sealings the RR-Vario made from black EPDM-rubber is available. Every RR-Vario is manufactured as a prototype by water jet cutting and can be adapted as required by sealing situation. RR-Vario therefore provides the perfect tightness against fire and highest pressures of air, gas and water. The system can be used for cables already installed! Table M3.RR.051, Installation dimensions in mm RR-Vario Type
Diameter D1
Drill hole diameter
RR-50/vario
50mm
50-51mm
RR-70/vario
70mm
70-72mm
RR-100/vario
100mm
100-103mm
RR-125/vario
125mm
125-128mm
RR-150/vario
150mm
150-154mm
RR-200/vario
200mm
200-205mm
Type description Example for a Plug size 150 with 2 cables diam. 21 and 1 cable diam. 30mm RR150/2x21/1x30/Vario
Every desired in-between size is possible!
D2 > 16mm
Figure to table M3.RR.051, Dim. in mm D2 > 16mm
Elastomer “bst-HFE” D1
or EPDM Drilled holes adjusted to cable diameter 5 60
Required informations for ordering Thickness of • Diameter of bore hole or… fittings 3-5mm • Inner diameter of sleeve (D1). • Number and… • Diameters of cables installed. • Distance between cables and to diameter D1 must not be less than 16mm (D2) Please note: Prototype manufacture but shortest delivery times!