STANDARD BRACKET projects 4.25" (for both diameters)
CURL TIEBACK
5.5"L, 4.5" extension
FERN FINIAL 6.5"L, 4.5"H
EXTENDED BRACKET
projects 5.75" and 6.1" (for 1" and 1.5" rods respectively)
BALL TIEBACK
3.75"L, 4.5" extension
ARABESQUE FINIAL
FLEUR DE LYS FINIAL
DOUBLE BRACKET
INSIDE MOUNT BRACKET
7.5"L, 7"H
projects 7.5" (for both diameters)
7"L, 5.5"H
available for 1" and 1.5" rods
RINGS
2" diameter for both 1" and 1.5" rods
WAND 40"L
PREMIUM TRAVERSE SYSTEM FEATURES • Hand-draw traverse rods available in 4' and 8' lengths. One-way draw and center draw traverse options available. • Hand-draw traverse rods add the utility of full drapery movement across the entire rod due to specially-designed top-mount brackets.
Antique
• 1" rod includes nylon glides, 1.5" rod includes roller glides with ball bearings. • 1" traverse rod cannot be used with finials. Can only be utilized with end caps, inside mounts, or as a secondary rod in conjunction with the double bracket.
Black Iron
• One-way hand-draw traverse rod system includes 16 glides for 4' rods and 32 glides for 8' rods, 1 master carrier with arm and 2 end stops. • One-way draw features reversible master carrier arm so that draw can either be from the left side or the right side.
Earth Rust
• Center-draw traverse rod system includes 16 glides for 4' rods and 32 glides for 8' rods, pair of master carriers with overlap arm, standard arm and 2 end stops. The master carrier arms (standard and overlap) are reversible so that the overlap can be left over right or right over left. • The use of a wand is strongly recommended for traverse rods. • Use a splice to connect two traverse rods together.
STANDARD BRACKET (1" and 1.5" projects 4.25") EXTENDED BRACKET (1" and 1.5" projects 5.75" and 6.1") 10 DOUBLE BRACKET (1" and 1.5" projects 7.5") 11 INSIDE MOUNT (available for 1" and 1.5" rods) 9
OTHER 12 13 14 15 16
RING (2" diameter) CORNER ANGLE (1" diameter 2.75"L) (1.5" diameter 4"L) CONNECTOR (1" or 1.5" diameter 12"L) END CAP (available for 1" and 1.5" rods) WAND (40"L)
RODS
STANDARD RODS (1" and 1.5" available in 4' and 8' lengths) SECONDARY RODS (1" available in 4' and 8' lengths) 18 HAND-DRAW TRAVERSE RODS (1" and 1.5" are sold as kits; 17
available in 4' and 8' lengths; Available in one-way draw and center raw traverse options) To adjust rod length, please follow general installation instructions for shortening metal rods . For customer service call: US 800.333.3777 CANADA 800.363.3020 EUROPE +44 (0) 1494 414741