Quadrax Contacts, Connectors and Cables

Quadrax Contacts, Connectors and Cables


Introduction Product Facts n 2

mm centerlines

n Designed

per ARINC 600 — Supplement 18

n Fits

into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular (GPR), MIL-DTL-38999 style, BACC65/EPXB, and custom interconnects

n Patented

single piece dielectric design simplifies termination and improves reliability

n Size

8 contacts are designed for standard hex crimp per M2252/5-01 and M22520/5-45

n 24

AWG internal contacts are designed for crimp tooling M22520/2-01 and Daniels K-709

A multi-signal contact system consisting of two differential pairs (matched impedance) used with quadraxial Ethernet and Fibre Channel cables. Available in shell size 8 (keyed); 24 AWG pin and socket contacts, Hex Crimp version as well as pin PCB tail solderable versions. Adaptable to a variety of connectors (ARINC 600, 404, D-Subminiature connectors, MIL-DTL-38999 style, etc.) Designed for use in high speed applications such as Gigabit Ethernet, IEEE 802.3Z and Fibre Channel X3T11.2 for use on Commercial Avionics Systems, Aircraft Data Networks, Military Communications, In-Flight Entertainment, and Space applications.

n Shells

are keyed for proper orientation inside connector insert blocks

n Rear

Release/Rear Remove cable versions and Front Release/Front Remove PCB versions

n Uses

standard insertion/ extraction tool

n Meets

ASTM E595 outgassing limits for spacecraft materiels

Materials Contacts, Shells, Ferrules — Copper alloy with gold over nickel finish. One-piece thermoplastic dielectric.

Performance Characteristics Maximum Mating Force per Contact Assembly — 2.75 lbf. Minimum Un-mating Force per Contact Assembly — 1.25 lbf. Durability — 500 mating/ unmating cycles

Typical Electrical Performance: Bandwidth – as high as 3 GHz (see characterization chart on page 3) Data Rate – in excess of 2 Gb/s Characteristic Impedance – 100 ohms ± 10 ohms Maximum Voltage Rating – 500 Vrms @ sea level Dielectric Withstanding Voltage – 1000 VAC rms between any two contacts @ sea level; 500 VAC rms between any contact and outer shell @ sea level

Technical Documents Product Specifications 108-2131 Quadrax Cable and PCB Connectors 108-2199 Quadrax MIL-DTL-38999 Style Connectors 108-2311 Quadrax 4Q4 In-Line D-Sub Style Connectors Test Reports 501-574 Quadrax Cable and PCB Connectors 501-660 Quadrax MIL-DTL-38999 Style Connectors 501-738 Quadrax 4Q4 In-Line D-Sub Style Connectors 502-1182 Quadrax Rectangular Connector — Qualified to Boeing Spec. BPS-C-193 Application Specifications 114-13123 Quadrax Rectangular Connectors and Quadrax Contacts 114-13163 Quadrax Circular Connectors and Quadrax Contacts 114-13190 In-Line Quadrax/Twinax Connectors 114-13233 Quadrax D-Sub Connectors and Quadrax Contacts

2 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com

Dimensions are shown for reference purposes only. Specifications subject to change. USA: +1 (800) 522-6752

Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999

UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015


Electrical Characteristics n Designed

for use with 100 ohm and 150 ohm characteristic impedance star quad cable. Reference contact chart on page 10.

n Signal

integrity testing was completed per SFF-8410 (see engineering test report 502-1182).

n Characteristic

impedance: 100 ohm ± 10 ohm nominal (measured 102.85 ohms)

n Near

end cross talk (NEXT) in the time domain: 0.89% measured on Tek 11801C Digital Sampling Oscilloscope

n Eye

Patterns (Differential Mode, 1 meter and 11.2 meter cable test lengths)

n The

minimum output eye opening for a 1 V launch voltage measured at 50% of the period is: n 1 meter, 100 MHz Eye Opening 928.53 mV n 1 meter, 1.25 GHz Eye Opening 839.77 mV n 11.2 meter, 100 MHz Eye Opening 761.60 mV n 11.2 meter, 1.25 GHz Eye Opening 315.20 mV

Return Loss

Insertion Loss

1 Meter Cable Length Frequency MHz 50 62 102 502 1002 1954 2950

dB 34.33 36.03 40.21 21.21 13.34 9.32 10.27

1 Meter Cable Length VSWR* 1.039 1.032 1.02 1.191 1.549 2.039 1.884

11.2 Meter Cable Length Frequency MHz 50 62 102 502 1002 1798 2502 3702

dB 35.26 36.87 38.90 26.02 14.62 11.74 13.34 6.54

Frequency MHz 50 62 102 502 1002 2002 3002

dB 0.13 0.19 0.27 0.87 1.39 2.48 3.29

11.2 Meter Cable Length VSWR* 1.035 1.029 1.023 1.105 1.456 1.698 1.549 2.781

Frequency MHz 50 62 102 502 1002 1798 2502 3702

dB 1.87 2.13 2.72 6.38 10.06 15.69 19.47 28.20

*calculated

Typical Insertion Loss 1 Meter Length, 100 Ohm Cable

Eye Pattern, 100 Ohm Cable (Time Domain Measurement of Voltage vs. Time)

100 Mb/s Data Rate

1 Gb/s Data Rate 3 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com





Product Family Overview

ARINC 600 Connectors: A Size 2 Plug Assembly with Q11 Quadrax Insert B Size 2 Receptacle Assembly with Q11 PCB Tail Quadrax Quadrax Rectangular Connectors: C 12 Position Receptacle D 12 Position Plug Assembly with Strain Relief and Seal Boots E 2 Position Plug Assembly with Strain Relief and Seal Boots F 2 Position Panel Mount Receptacle with Strain Relief and Seal Boots U Direct Attach

38999 Style Circular Connectors: I Size 19 Plug, 4Q4 Quadrax arrangement with Seal Boots J Size 19 Receptacle, 4Q4 Quadrax arrangement, Panel Mount Configuration w/Seal Boots K Size 19 Receptacle, 4Q4 Quadrax arrangement, PCB Mount L Size 9 Receptacle, 1Q1 Quadrax arrangement, Panel Mount w/Custom Flex Circuit Assembly for direct attachment to printed circuit board M Size 9 Plug, 1Q1 Quadrax arrangement with Seal Boot N Size 9 Receptacle, 1Q1 Quadrax arrangement, PCB Mount

General Purpose Rectangular Connectors: G GPRB2 Plug, Dual Insert Configuration w/3 Pos. Quadrax Insert H GPRB2 Receptacle, Dual Insert Configuration w/3 Pos. Quadrax insert

D-Sub Style Quadrax Rectangular Connectors: O Plug with Seal Boots P Receptacle, for right-angle PCB mount Q Receptacle, for vertical PCB mount R Cable Receptacle with Seal Boots






Quadrax Contacts PC Tail Contacts

Part No.

Description

1445626-1

Contact, Pin, Solder Tail

1445626-3


1445626-2 1445626-4

1445626-5*


.422 [10.72]


.297 [7.54]

n Patented

one-piece dielectric inserts for easy assembly and lowest applied cost

n Available

with silicone seal boots rated for 50,000 ft. altitude immersion

n Crimp

type, screw machined, 24 AWG contacts

n Quadrax

size 8 shells are keyed per ARINC 600 for correct orientation inside connector inserts

n Twinax

contacts: Qualification tests pending

n Direct

Attach to PCB

- Asymmetric standoff leg provides built-in keying to PC board n Internally

keyed contacts for MIL-DTL-38999 connectors

- One-piece dielectric inserts for easy assembly and lowest applied cost

.181 [4.60]


Crimp Style Contacts1

Product Facts

Dim. A .228 [5.79]

.297 [7.54]

Part No.

Description

1445692-1

Contact Kit, Pin, Crimp

1445692-4 ***

Contact Kit, Pin, Crimp, with wire seal boot*

1445692-3** 1445693-1

1445693-3**

1445693-4 ****

Hex Crimp .218

Contact Kit, Pin, Crimp, with wire seal boot

.218 —

Contact Kit, Socket, Crimp

.218

Contact Kit, Socket, Crimp, with wire seal boot

.218

Contact Kit, Socket, Crimp, with wire seal boot

—

Reference cables: Tensolite NF24Q100, NF26Q100, 24443/03130X-4(LD), 24443/9P025X-4(LD); Raychem CEC-RWC-18687, Raychem CEC-RWC-18664

1445692-5**

Contact Kit, Pin, Crimp with wire seal boot

.218

1445693-5**

Contact Kit, Socket, Crimp with wire seal boot

.218

1445692-6 1445693-6


.218


.218

Reference cables: DRAKA F4703-3, F4704-4–insulation diameter is larger

Hex Crimp


.231

1877040-1


.231

1877039-2**

1877040-2**

1877039-1

Contact Kit, Pin, Crimp with wire seal boot

.231

Contact Kit, Socket, Crimp with wire seal boot

.231

Reference cables: Tensolite 26473/02006X-4(LD); Raychem CEC-RWC-18684, Raychem CEC-RWC-18680

*Tails are solder dipped **Used with Quadrax rectangular and circular connectors ***Qualified to Boeing BACC47GA1 ****Qualified to Boeing BACC47GB1 (1) For other cables, contact TE.






Quadrax Contacts (Continued) Size 8 Quadrax Contacts

Part No.

Description

1811010-1

Socket kit with heat-shrink tubing

Hex Crimp .218

1811269-1

Pin kit with heat-shrink tubing

.218

PC Tail Contact – Direct Attach to PCB

Part No.

Description

Tail Length

Dim A

1954576-1

150 Ohm

.125 [3.18]

.250 [6.35]

1954576-3

100 Ohm

.205 [5.21]

.270 [6.86]

1954576-2

100 Ohm

.125 [3.18]

.270 [6.86]

Size 8 Differential Twinax Contacts

Part No.

Description

Hex Crimp

1811865-1

Assembly, Pin, Twinax

.218

1811866-1

Assembly, Socket, Twinax

.218

See page 2 for Application Specifications






Quadrax Contacts (Continued) Size 8 Quadrax PCB Pin Contact Front Release/ Front Remove Design Part No. 1445626-1ww

Ø .313-.316 [7.95-8.03]

Dim. A

Ø .217-.219 [5.51-5.56]

ww various tail lengths

.079 ± .001 [2.00 ± 0.03]

Ø .273-.276 [6.93-7.01]

Blank Front Release/ Front Remove Design Part No. 1604940-2

Size 8 Quadrax Pin Contact — Crimp Style Rear Release/ Wiring Key Rear Remove Design (Index Line) Part No. 1445692-1w w -3 with boot

Ø .217-.219 [5.51-5.56]

Ø .313-.316 [7.95-8.03]

Size 8 Quadrax Socket Contact — Crimp Style Rear Release/ Rear Remove Design Part No. 1445693-1w w -3 with boot

.505-.515 [12.82-13.08]

Ø .313-.316 [7.95-8.03]

.111 [2.82]

Ø .248 [6.299] Ref.

.056 [1.41]

.665 Ref. [16.89]

Quadrax Cable (not included, shown for reference only)

Wiring Key (Index Line)

Ø .287 [7.31]

.111 [2.82]

.056 [1.41]

Ø .248 [6.299] Ref.

.595 [15.11]

.677 Ref. [17.2]

Quadrax Cable (not included, shown for reference only)






Quadrax Contacts (Continued) .020 Pin Position Feature Position 2

Cable shown for Illustration only; not included in kit

.470

Ø .350±.003

.155

.160

.125±.015

PC Tail Contact – Direct Attach to PCB n 100 and 150 ohm Systems n Simple Direct Attach to PCB without connector for component reduction n Designed from ARINC size 8 Quadrax contacts n Low cost solution from both assembly and component ends

Part Number 1954576-1, -2: B = .125 Part Number 1954576-3: B = .205 Part No. 1954576-1 1954576-2 1954576-3

Impedance (Ω) 150 100 100

Dim A (Max) .270 [6.86] .250 [6.35] .250 [6.35]

Dim B .125 [3.18] .125 [3.18] .205 [5.21]

Size 8 Differential Twinax Contacts 100 Ohm Differential Pair Twinax Contact n Designed

to meet the requirements of ARINC Specification 810 for 100 ohm size 8 non-concentric twin-axial contacts

Ø .2179 Ref. [5.535]

.510 Ref. [12.95]

.665 Ref. [16.89]

Wiring Key (Index Line) Ø .218 Ref. [5.53] Ø .3140 [7.976] Ref.

.056 [1.41]

n Works

in all connectors accepting ARINC 600 style Quadrax contacts

Ø .2480 Ref. [6.299]

Twinax Cable (not included, shown for reference only)

.111 [2.82]

Part No. 1811865-1

Wiring Key (Index Line)

Ø .313-.316 [7.951-8.026] .056 Ref. [1.41]

.595 Ref. [15.11]

.677 Ref. [17.20]

Ø .287 [7.31] Max.

Ø .2480 Ref. [6.299]

Twinax Cable (not included, shown for reference only)

.111 [2.82]

Part No. 1811866-1






Quadrax/Twinax Contact Accessories Size 8 Quadrax Extraction Tool Part No. 1738894-1

1738894-1 Size 8 Removal Tool

1.50 [38.1] 1.28 [32.5]

Ø .328 [8.3] Ø .283 [7.2]

Seal Boots

.82 [20.8]

.82 [20.8]

Ø .355 [9.0]

Ø .275 [6.9]

Ø .275 [6.9]

.82 [20.8]

Ø .355 [9.0]

Ø .275 [6.9]

.32 [8.1]

.32 [8.1]

Wire Seal Boot Part No. 1811481-1 Cable O.D. .145–.175 .218 Hex Crimp

Ø .355 [9.0]

Ø .275 [6.9]

.32 [8.1]

Wire Seal Boot Part No. 1811943-1 Cable O.D. .170–.200 .231 Hex Crimp

1.40 [35.36]

Ø .275 [6.99]

Ø .355 [9.02]

.88 [22.35]

Solid Seal Boot Part No. 1811633-1






ARINC Size 8 Quadrax Connectors Product Facts four size 24 screw-machined contacts with standard crimp tooling per M22520/2-01 and M22520/5-01 for ease of termination

600 plug connectors & receptacles

■ Utilizes

release/front removable PCB mount contact design for use in ARINC 600 receptacle connectors

■ Quadrax

housing is keyed to assure mating alignment

■ Contacts

are on 2 mm centerline per ARINC 600 specification

■ Front

release/rear remove crimp contact design for use in ARINC

■ To

extract Quadrax contact from connector insert, use Extraction Tool Part Number 1738894-1

■ Rear

■

Per Supplement 18 to ARINC Specification 600

ARINC Size 2 Connectors Insert Arrangement Style Part No. Type A B C Front Release 1484406-2 Receptacle Q11 Q11 68Q2 Front Remove Rear Release 1484407-2 Plug Q11 Q11 68Q2 Rear Remove Receptacle 150 Front Release 1663032-1 150 11Q2 Front Remove Receptacle Q11 Front Release 1663900-1 Q11 85 Front Remove Receptacle Q11 Front Release 1484620-1 Q11 85 Front Remove Rear Release 1484621-1 Plug Q11 Q11 85 Rear Remove ARINC Size 3 Connectors Insert Arrangement Style Part No. A B C Type D E F Receptacle 150 150 11Q2 Front Release/ 1663018-1 150 150 11Q2 Front Remove 150 150 11Q2 Front Release/ Receptacle 1663018-2 150 150 11Q2 Front Remove 1663018-3 Receptacle 150 150 11Q2 Front Release 150 150 11Q2 Front Remove 1663019-1 150 150 11Q2 Rear Release Plug 150 150 11Q2 Rear Remove 150 150 11Q2 Rear Release Plug 1663019-2 150 150 11Q2 Rear Remove 1663019-3 150 150 11Q2 Rear Release Plug 150 150 11Q2 Rear Remove Note: Custom insert combinations available upon request. Contact TE.

6.960 ± .015 [176.78 ± 0.38] 68Q2 Insert Assembly

Shell Features

Contacts

Electroless Nickel Plated, no clinch nuts Electroless Nickel Plated, no clinch nuts Chromate with six 4-40 clinch nuts Chromate, no clinch nuts Electroless Nickel Plated, with ten 4-40 clinch nuts Electroless Nickel Plated, no clinch nuts

Size 22 signal & Quadrax contacts supplied loaded in inserts; post extension = .25 [6.35] Crimp style size 22 signal and Quadrax contacts supplied unloaded Signal, Power and Quadrax contacts supplied loaded in inserts; post extension = .25 [6.35] Signal, Power and Quadrax contacts supplied loaded in inserts; post extension = .25 [6.35] Signal, Power and Quadrax contacts supplied loaded in inserts; post extension = .15 [3.81] Crimp contacts

Shell Features

Contacts

Electroless Nickel Plated

No contacts

Electroless Nickel Plated Chromate with fourteen 6-32 clinch nuts Electroless Nickel Plated

Signal, Power and Quadrax contacts supplied loaded in inserts; post extension signal and power = .25 [6.35]; Quadrax = .200 [5.08] Signal, Power and Quadrax contacts supplied loaded in inserts, post extension = .25 [6.35] No contacts

Electroless Nickel Plated

Crimp contacts

Chromate

Crimp contacts

6.980 ± .015 [177.29 ± 0.38]

11Q11 Insert Assembly



1.800 ± .010 [45.72 ± 0.25]

Date Code

Keying Plate and Screws

Shell

.650 [16.51]

Receptacle, Assembly Size 2 Front Release/Front Remove Part No. 1484406-2 shown

1.800 ± .010 [45.72 ± 0.25]

Keying Plate and Screws

Shell

.650 [16.51]

Plug, Assembly Size 2 Rear Release/Rear Remove Part No. 1484407-2 shown






ARINC Size 8 Quadrax Connectors (Continued) Contact Inserts & Arrangement Codes — Shell Size 2 or 3

Shell Module A, B, D or E

Q11 1, 2, 3 11 Size 8 Quadrax Metal

Shell Module C or F

Q6 1, 2, 3 6 Size 8 Quadrax Metal

11Q2 1, 2, 3 4 Size 20 4 Size 12 3 Size 16 2 Size 8 Quadrax

68Q2 2, 3, 4 68 Size 22 2 Size 8 Quadrax

A 1

Notes: 1. Available for plug or receptacle with rear release/ remove contacts. 2. Available for receptacle only with all contacts front release/remove. 3. Standard size 8 contacts will not fit in Quadrax size 8 inserts. Also, Quadrax size 8 contacts will not fit into standard size 8 inserts. 4. Available for plug only with all contacts rear release/remove.

118Q2 118Q2 118 Size2,3, 22 4 2 118 Size 8 Quadrax Size 22

2 Size 8 Quadrax

13CQ2 2, 3 4 Size 20 3 Size 16 4 Size 12 2 Size 8 Quadrax

62Q2 2, 3, 4 60 Size 22 2 Size 16 2 Size 8 Quadrax

For complete listing of all ARINC 600 insert arrangements, reference catalog 1308940.

GPRB Insert Arrangements1,2 Keying:

A 25QI

3

10Q2

3

B

3Q3

3

27.00 max. max.)Mating Pin (1.063 inserts:

Notes: 1 . faces shown above. 2. In a GPRB2 shell, one insert must be “A” keyed and the other one must be “B” keyed (See at right). 3. Size 8 cavity applicable for use with Arinc 600 Quadrax or Twinax contacts. For complete listing of all General Purpose Rectangular insert arrangements, reference catalog 1654763.

27.50 max. (1.083 max.)






Rectangular Connectors Product Facts

■ Aluminum

shells are keyed and polarized, and are available with lightweight plastic backshell strain reliefs

■ High

performance rectangular connector

■ Available

in 2, 4, and 12 positions

■ Designed

for use with wire seal boots and rated for use up to 50,000 ft. altitude

■ Provides

■ Center

■ Qualified

excellent density in a rectangular profile for packaging flexibility.

jackscrew design for fast, reliable mating

Position 2 4 12

to Boeing Part Standard BPS-C-193

Part No. 1604896-2* 1604897-5* 1604898-5*

Type Receptacle Receptacle Plug

Mounting Style PCB Panel Mount Free-Hanging

Style Front Release/Front Remove Rear Release/Rear Remove Rear Release/Rear Remove

1604905-1* 1738949-2* 1738950-2* 1738951-2*

Backshell - (1 pc) Receptacle Receptacle Plug

— PCB Panel Mount Free-Hanging

— Front Release/Front Remove Rear Release/Rear Remove Rear Release/Rear Remove

— PCB Panel Mount Free-Hanging — —

— Front Release/Front Remove Rear Release/Rear Remove Rear Release/Rear Remove — —

1738955-1* Backshell - (1 pc) 1604798-2* Receptacle 1604799-5* Receptacle 1604800-5* Plug 1604874-1* Backshell - Receptacle (2 pc) 1604874-2* Backshell - Plug (2 pc)

Polarization Flat Flat Flat — Flat Flat Flat — Flat Flat Flat — —

Note:

Use w/1604897-5 or 1604898-5

Use w/1738950-2 or 1738951-2

Use w/1604799-5 Use w/1604800-5

*Jackscrew/Jackpost hardware included but not installed

2 Position 2.160 [54.86]

1.949 [49.5]

1.905 [48.39]

1.694 [43.03]

1.694 ± .010 [43.03 ± 0.25]

1.217 +.001/-.003 [30.9 +0.03/-0.08]

.790 ± .003 [20.0 ± 0.08] .125 [3.18] 2X

1.333 ± .002 [33.9 ± 0.05]

.344 [8.74]

1.333 ± .003 [33.86 ± 0.08]

.750 ± .003 [19.1 ± 0.08]

6-32 SPIRALOCK Threads Thru, 4X 1.221 ± .002 [31.01 ± 0.06]

1.569 ± .010 [39.9 ± 0.25]

.422 [10.7]

1.445 ± .010 [36.70 ± 0.25]

.225 [5.72]

Jackscrew and Retention Nut Kit, Part Number 1738592-2. Included, but not installed.

Jackpost and Retention Nut Kit, Part Number 1738592-1. Included, but not installed.

PCB Mount Receptacle (Part No. 1604896)

.672 +.001/-.002 [17.1 +0.03/-0.05]

1.070 [27.18]

6-32 SPIRALOCK Threads Through 2X .965 ± .010 [24.5 ± 0.25]

1.309 [33.2]

Panel Mount Receptacle (Part No. 1604897)

Free-Hanging Plug (Part No. 1604898)

SPIRALOCK is a trademark of Detroit Tool Industries Corporation.






Rectangular Connectors (Continued) 4 Position 1.949 [49.50] 1.25 [31.75] 2X Ref.

1.685 [42.80

2.160 [49.50] 1.905 [48.39]

± .010 ± 0.25]

.001 1.217 +– .003 + 0.03 [30.91 – 0.08 ]

1.694 [43.03] .865 ± .003 [21.97 ± 0.08]

.350 ± .002 [8.89 ± 0.05]

1.333 [33.86

± .002 ± 0.05]

1.070 [27.18]

2X 6-32 UNC-2B SPIRALOCK Threads Through .344 [8.74]

1.221 ± .002 [31.01 ± 0.05]

.825 ± .003 [20.96 ± 0.08]

6-32 SPIRALOCK Threads Through, 4X

1.333 ± .003 [33.86 ± 0.08]

1.221 ± .002 [31.01 ± 0.05]

.965 ± .010 [24.51 ± 0.25]

.250 ± .003 [6.35 ± 0.08]

1.309 [33.25]

1.569 ± .010 [39.85 ± 0.24]

.422 [30.72]

1.445 ± .010 [36.70 ± 0.25]

.225 [5.72]

Jackscrew and Retention Nut Kit, Part Number 1738592-2. Included but not installed.





12 Position 3.600 [91.4]

3.600 [91.4]

3.346 ± .010 [85.0 ± 0.25]

3.346 [84.99]

2.960 [75.2] .630 [16.0]

.790 ± .003 [20.0 ± 0.08] .125 [3.18] 2X

2.984 ± .002 [75.8 ± 0.06]

.965 [24.5

.750 ± .003 [19.1 ± 0.08]

.900 ± .003 [22.9 ± 0.08]

6-32 SPIRALOCK Threads Through 2X

± .010 ± 0.25]

2.868 +.001/-.003 [72.8 +0.03/-0.08]

2.872 ± .002 [72.95 ± 0.05]

2.984 ± .003 [75.8 ± 0.08]

.672 +.001/-.002 [17.1 +0.03/-0.05]

6-32 SPIRALOCK Threads Thru, 4X

1.569 ± .010 [39.9 ± 0.25]

Jackscrew and Retention Nut Kit, Part Number 1738592-2. Included but not installed.

1.445 [36.70]





SPIRALOCK is a trademark of Detroit Tool Industries Corporation.






Rectangular Connectors (Continued) Accessories

2 Position Low Profile Seal Retainer Part No. 2101752-1


ORIENTATION OF BOOT SEAL PLATE FOR PLUG APPLICATION

ORIENTATION OF BOOT SEAL PLATE FOR PLUG APPLICATION

12 Position Backshell/ Strain Relief Kit Part No. 1996373-1 for receptacle; Part No. 1996373-2 for plug


Wrench, Retention Nut, Jackscrew and Jackpost, Quadrax Rectangular Connector Part No. 1604972-1

Wrench, Retention Nut, T-handle Tool Part No. 1950030-1






Rectangular Connectors (Continued) Low Profile Rectangular Connector Assemblies Product Facts n Designed to provide

a ruggedized in-line solution for Quadrax cable to printed circuit board mount applications, in a blind-mateable D-subminiature configuration

n Quadrax

contacts ground directly to connector shell

4Q4 Outer Contact Shell Brass Plated Gold Over Nickel

Dielectric Thermoplastic 1.852 [47.0] 1.534 [39.0]

.329 [8.4]

Strain Relief Clamp Thermoplastic Packaged Unassembled

1.852 [47.0]

Interfacial Seal Fluorosilicone

1.512 ± .003 [38.40 ± 0.08]

.504 [12.8]

2.607 [66.2] REF

.312 ± .003 [7.92 ± 0.08]

#4-40 UNC SPIRALOCK 2X

2.088 [53.0]

Receptacle Shell Nickel Plated Aluminum Alloy

.504 [12.8]

Ø.120±.003 [3.05±0.08] 2X

Receptacle Shell Nickel Plated Aluminum Alloy

.296±.002 [7.52±.05]

#4-40 Jackscrew Stainless Steel Qty. 2

.296 [7.5]

2.088 [53.0]

.130 [3.3] #4-40 UNC SPIRALOCK 2X

Nickel Plated Aluminum Alloy 1.740 [44.2]

.379 [9.6]

.550 [14.0]

.504 [12.8]

1.852 [47.0]

Interfacial Seal Fluorosilicone

Right Angle PCB Mount Receptacle (Part No. 2000314)

Panel-Mount or Free-Hanging Plug Kit (Part No. 2000317)

Free-Hanging Receptacle Kit (Part No. 2000263)

Accepts standard AMPLIMITE Boardlock Hardware (sold separately).

Socket Contacts included in Kit. Accepts standard AMPLIMITE Screwlock Hardware (sold separately).

Jackscrews, Strain Relief, and Crimp Pin Contacts included in kit.

Female Screwlock Part No. 212447-1 Nut Driver Part No. 811262-1 For assembling female screwlocks to connector flange.






Custom MIL-DTL-38999 Series III Style Circular Connectors Product Facts ■ Available

in various shell sizes: 9 (1Q1), 17 (2Q2), 19 (4Q4) and 25 (8Q8)

■ Designed

for use with wire seal boots for sealing and optimized alignment

■ Front

metal-shell design provides a full ground plane

■ Lightweight

composite rear shell available in size 19 for reduced weight

■ Accepts

standard backshells

Shell Size Part No. Type 1877384 Plug 1738916 Receptacle 9 1811184 Receptacle 2157694 Receptacle 1877775 Plug 17 1877774 Receptacle 2157455 Receptacle 2157695 Receptacle 1811902 Plug 1738974 Receptacle 19 1877732 Receptacle 1811901 Receptacle 2157696 Receptacle 1954355 Plug 21 1954353 Receptacle 1877921 Plug 23 1954577 Receptacle 1811928 Plug 25 1811927 Receptacle 2101395 Receptacle See TE Customer Drawing for finish options

Plug, Shell Size 9 Single Quadrax, RR-RR Part No. 1877384

Description Single Quadrax, RR-RR 38999 Style, Single Quadrax, FR-FR, Jam Nut Style, with PC Tail Contacts 38999 Style, Single Quadrax, FR-FR, PCB Mount with Stand-offs and PC Tail Contacts 38999 Style, Single Quadrax, with 1 Contact, FR-FR, Jam Nut Style, Series III 38999 Style, Arrangement 2Q2, RR-RR 38999 Style, Arrangement 2Q2, RR-RR 38999 Style, Arrangement 2Q2, FR-FR, PCB Mount 38999 Style, with 2 Quadrax Contacts, Arrangement 2Q2, FR-FR, Jam Nut Style, Series III 38999 Style, Arrangement 4Q4, RR-RR 38999 Style, with 4 Quadrax Contacts, FR-FR 38999 Style, with 4 Quadrax Contacts, FR-FR, with PC Tail Contacts 38999 Style, Arrangement 4Q4, RR-RR 38999 Style, with 4 Quadrax Contacts, Arrangement 2Q2, FR-FR, Jam Nut Style, Series III 38999 Style, Arrangement 4Q4, FR-FR, Series III 38999 Style, Arrangement 4Q4, FR-FR, Series III, with PC Tail Contacts 38999 Style, Arrangement 6Q6, Series III 38999 Style, Arrangement 6Q6, Series III 38999 Style, Arrangement 8Q8, RR-RR 38999 Style, Arrangement 8Q8, RR-RR 38999 Style, Arrangement 8Q8, FR-FR, with PC Tail Contacts

Ø.855 [21.72] Max. Over Knurl

Ø .429 [10.90]

Ø .520 [13.21]

Ø .727 [18.47]

.020 [.508]

Receptacle, Shell Size 9, 38999 Style Single Quadrax, FR-FR Jam Nut Style Part No. 1738916

1.064 [27.03]

1.527 [38.79]

Ø 1.185 [30.10]

1.064 [27.03]

Contacts sold separately (unless noted) see page 5

.885 [22.48]

.662 [16.81]

.425 [10.79]






Custom MIL-DTL-38999 Series III Style Circular Connectors (Continued) Receptacle, Shell Size 9, 38999 Style Single Quadrax, FR-FR PCB Mount with Stand-offs Part No. 1811184 (with PC tail contacts)

.937 .72 [18.29] [23.8]

.72 [18.29]

.818 [20.78] .329 [8.36]

.16 [4.06]

6-32 UNF .25 Deep 4X

Receptacle, Shell Size 9 38999 Style Single Quadrax, FR-FR Jam Nut Style Part No. 2157694

Plug, Shell Size 17, 38999 Style Arrangement 2Q2, RR-RR Part No. 1877775

Ø1.513 [38.43] Max. Over Knurl

.379 [9.63] Ref.

1.210 [30.73]

Ø 1.270 [32.26]

Ø .748 [19.0]

Ø 0.917 [23.29]

.022 [0.56]

Receptacle, Shell Size 17 38999 Style Arrangement 2Q2, RR-RR Part No. 1877774

1.062 [26.97] .969 [24.61]

.752 [19.1] Ref.

1.232 [31.29] .818 [20.76]

.132 [3.34]

1.311 ± .010 [33.3 ± 0.25]

Ø .748 [19.00]

Ø 1.183 [30.05]

.090 [2.29] 1.590 [40.39] Ref.

Contacts sold separately (unless noted) see page 5

.683 [17.34] Ref.






Custom MIL-DTL-38999 Series III Style Circular Connectors (Continued) Receptacle, Shell Size 17 38999 Style Arrangement 2Q2, FR-FR Part No. 2157455

.400 [10.16] Typ

.818 [20.76] .805 [20.45] 2X

1.311 ±.010 [33.30 ±.25]

.185 [4.70] .185 [4.70]

.604 [15.24]

.000 Ø .062 1.57 Ref. 1.096 [27.84] Typ

.060 [1.52]

.470 [11.94]

.100 [2.54]

.509 [12.93]

.096 [2.44] Ref.

Receptacle, Shell Size 17 38999 Style Arrangement 2Q2, FR-FR Jam Nut Style Part No. 2157695

Plug, Shell Size 19 38999 Style Arrangement 4Q4, RR-RR Part No. 1811902

Ø1.513 [38.42] Max. Over Knurl

Ø 1.376 [34.95]

Ø .840 [21.34]

Ø 1.022 [25.96]

.020 [0.51]

Receptacle, Shell Size 19, 38999 Style w/4 Quadrax Contacts, FR-FR Part No. 1877732 (w/ PC Tail Contacts)

.380 [9.64] Ref.

1.210 [30.73]

.75 [19.04] Ref.

1.156 [29.36]

1.156 [29.36]

Part No. 1738974 (connector only)

Ø 1.244 [31.60]

1.435 [36.45]

6-32 UNF .25 Deep 4x

.818 [20.76] .118 [3.00]

.400 [10.16]

Contacts sold separately (unless noted) see page 5 18 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com





Custom MIL-DTL-38999 Series III Style Circular Connectors (Continued) Receptacle, Shell Size 19, 38999 Style Arrangement 4Q4, RR-RR Part No. 1811901

1.156 [29.36]

1.232 [31.29] .132 [3.34] 4X

1.062 [26.97]

.818 [20.76]

Ø .840 [21.34]

Ø 1.244 [31.60]

1.435 [36.45]

.683 [17.34] Ref.

.090 [2.29] 1.590 [40.39] Ref.

Receptacle, Shell Size 19 38999 Style Arrangement 4Q4, FR-FR Jam Nut Style Part No. 2157696

Plug, Shell Size 21, 38999 Style Arrangement 4Q4, FR-FR Series III Part No. 1954355

Receptacle, Shell Size 21, 38999 Style Arrangement 4Q4, FR-FR Series III Part No. 1954353

1.250 Typ. [31.75]

.315 [8.00]

.200 [5.08] 1.499 Typ. [38.07]

Plug, Shell Size 23, 38999 Style Arrangement 6Q6, Series III Part No. 1877921

1.72 1.72 [43.69] [43.69] Max. Over Knurl Max. Over Knurl

Contacts sold separately (unless noted) see page 5 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com

.818 [20.78] 1.210 1.210 [30.73] [30.73]

.024 .024 [0.61] [0.61]


.298 [7.57]

.379 .379 [9.63] [9.63]

.750 .750 [19.05] [19.05] Ref. Ref.


19 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015


Custom MIL-DTL-38999 Series III Style Circular Connectors (Continued) Receptacle, Shell Size 23, M38999 Style Arrangement 6Q6, .156 Typ. Series III [3.96] Part No. 1954577

Plug, Shell Size 25 38999 Style Arrangement 8Q8, RR-RR Part No. 1811928

1.689 ± .010 Typ. [42.90 ± 0.25]

1.590 Typ. [40.39]

1.375 Typ. [34.93]

.818 [20.78]

1.250 Typ. [31.75]

Ø 1.887 [47.92] Max. Over Knurl

.090 [2.29]

1.665 .818 [42.29] [20.8]

.40 Typ [10.16]

.805 8 Plc.

1.811±.010 [46.0±.25] Typ

.604 [15.34] Ø1.746 [44.35] Ø 1.397 [35.48]

Ø 1.400 [35.36]

1.620 [41.15] Typical

.816 [20.73]

.014 [0.36]

Receptacle, Shell Size 25 38999 Style Arrangement 8Q8, RR-RR Part No. 1811927

.470 [11.94]

1.500 [38.1] 1.500 Typ

[38.1]

1.375 [34.93]

.060 [1.52]

1.666 [42.32]

.097 Ref [2.46]

.10 .090 [2.54]

.818 [20.76]

.156 [3.96]

1.811 ± .010 [46.0 ± 0.25]

.509 [12.93]

Ø 1.620 [41.15]

Ø 1.397 [35.48]

.818 [20.8]

Receptacle, Shell Size 25 38999 Style Arrangement 8Q8, FR-FR Part No. 2101395 (w/ PC Tail Contacts)

.759 [19.27]

[2.29]

.40 Typ [10.16]

.805 8 Plc.

1.811±.010 [46.0±.25] Typ

.604 [15.34]

1.620 [41.15] Typical

1.500 [38.1] Typ

.470 [11.94]

.060 [1.52]

.509 [12.93] .10 [2.54]

Receptacle, Shell Size 25 38999 Style Arrangement 8Q8 Jam Nut Part No. 2157628

.097 Ref [2.46]

Contacts sold separately (unless noted) see page 5 20 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com





QUADLITE Quadraxial Cables Product Facts 00 ohm and 150 ohm 1 cables ■ Materials rated from -65˚C to +200˚C ■ Low outgassing materials (PTFE, FEP) ■ Custom design capabilities ■ Proven technologies and materials ■ Lightweight ■ Low smoke and low toxicity ■ Available in 150˚C and 200˚C rated construction ■

TE’s Quadlite family of lightweight, fluoropolymer cables are for use in high speed, high bandwidth applications such as 100Base-T, Gigabit Ethernet, IEEE 1394 and Fibre Channel employed in commercial avionics systems, aircraft data networks, in-flight entertainment systems and military communications.

Applications

Materials

Cables are used in communications, control and instrumentation for: n In-Flight Entertainment n Satellite TV n Flight Subsystems n Military Communications

Dielectrics — Foamed FEP Jacket — FEP

Standards and Specifications TE Specification 1200 ANSI/TIA-568-B.2 IEEE 1394 ARINC 664

The Quadlite cables are designed to meet the flammability requirements of FAR Part 25 and the rigorous smoke and toxicity requirements found in commercial aerospace standards such as EN3475. Quadlite cables are to be used with the Quadrax contacts and connectors.






QUADLITE Quadraxial Cables (Continued) 100Base-T Ethernet Cables 100 Ohms - 150˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 1 MHz 10 MHz 100 MHz Min. NEXT (dB) Min. SRL (dB)

TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 1 MHz 10 MHz 100 MHz Min. NEXT (dB) Min. SRL (dB)

CEC-RWC-18634 26 SCCA 0.0185 Formed FEP 0.037 0.145 17.7 TCC FEP 100 150˚C 13.5


CEC-RWC-18666 22 SCC 0.0295 Formed FEP 0.057 0.195 32.0 TCC FEP 100 150˚C 12.9

4.0 10.5 36.0

2.2 6.8 24.8

1.6 5.9 21.0

10 MHz 50 23

100 MHz 35 16

10 MHz 50 23

100 MHz 35 16



4.0 10.5 36.0

2.2 6.8 24.8

10 MHz 50 23

100 MHz 35 16

10 MHz 50 23

10 MHz 50 23

100 MHz 35 16

100Base-T Ethernet

100 MHz 35 16






QUADLITE Quadraxial Cables(Continued) 100Base-T Ethernet Cables 100 Ohms - 200˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 1 MHz 10 MHz 100 MHz Min. NEXT (dB) Min. SRL (dB)

CEC-RWC-18658 26 SCCA 0.0185 Formed FEP 0.037 0.144 18.7 SCC FEP 100 200˚C 13.5


CEC-RWC-18665 22 SCC 0.0295 Formed FEP 0.057 0.194 34.3 SCC FEP 100 200˚C 12.9

4.0 10.5 36.0

2.2 6.8 24.8

1.6 5.9 21.0

10 MHz 50 23

100 MHz 35 16

10 MHz 50 23

100 MHz 35 16

10 MHz 50 23

100 MHz 35 16






QUADLITE Quadraxial Cables (Continued) Fibre Channel Cables 150 Ohms - 150˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 531 MHz 1062 MHz



CEC-RWC-18682 22 SCC 0.0295 Formed FEP 0.094 0.281 57.2 TCC FEP 150 150˚C 6.0

13 21

11 17

9 13



CEC-RWC-18686 22 SCC 0.0295 Formed FEP 0.094 0.284 57.2 SCC FEP 150 200˚C 6.0

13 21

11 17

9 13

150 Ohms - 200˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 531 MHz 1062 MHz

Fibre Channel






QUADLITE Quadraxial Cables (Continued) 4-Pair Cat 5E Constructions 100 Ohms - 150˚C/200˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 1 MHz 100 MHz 100 MHz Min. NEXT (dB) Min. SRL (dB)

CEC-RWC-20412 24 SCHSCA 0.0235 Formed FEP 0.046 0.279 46.2 TCC FEP 100 150˚C 13.5

CEC-RWC-21064 24 SCC 0.0235 Formed FEP 0.046 0.249 39.5 TCC XL-ETFE 100 150˚C 13.5

CEC-RWC-20638 26 (7 strand) SCC 0.019 Formed FEP 0.036 0.204 29.8 SCC FEP 100 200˚C 13.5

2.4 7.5 26.4

2.2 6.8 24.8

2.4 8.8 30.5

10 MHz 50 25

100 MHz 35 19

10 MHz 50 25

100 MHz 35 19

10 MHz 50 23

100 MHz 35 16

Cat 6 Constructions 100 Ohms - 100˚C/90˚C TE Part No. Conductor AWG Size (19 Strand) Conductor Material: Nom. Conductor Diameter (in.): Insulation Material: Nom. Insulation OD ± 0.002 (in.): Nom. Cable OD (in.): Nom. Cable Weight (lb/1 kft): Shield Material: Jacket Material: Impedance ± 10% (Ω): Temp. Rating: Nom. Capacitance (pF/ft): Nom. Attenuation (dB/100 m): 1 MHz 100 MHz 100 MHz 250 MHz Min. NEXT (dB) Min. SRL (dB)

CEC-RWC-20837 23 Bare Copper 0.021 Foamed PE 0.046 0.350 52.6 TCC FDR-25 100 100˚C 13.5

CEC-RWC-21088 23 Bare Copper 0.021 PE 0.046 0.249 39.5 TCC Raythane 100 90˚C 13.5

1.8 5.5 18.3 30.4

1.8 5.5 18.3 30.4

10 MHz 70 36

250 MHz 52 24

10 MHz 70 36

250 MHz 52 24






Custom Solutions Spacecraft Applications

Product Facts

Custom Cable and Flex Assemblies

Product Facts

General Purpose Rectangular (GPR) Connector Assemblies

Product Facts

n Quadrax

contacts and QUADLITE cables meet ASTM E595 outgassing limits for spacecraft applications

n Quadrax

contacts and connectors can be provided as custom cable and flex assemblies for customer specific applications

n Quadrax

inserts are available for the rugged, modular General Purpose Rectangular connector, facilitating the mix of high speed signals with a variety of other power, fiber optic, signal, and coax insert configurations in a single connector system

(See Catalog 1654763)

This product is sold by TE under license from Radiall S.A.

Single Splice Quadrax Part No. 1996500

Product Facts n Provides

field repairable splicing mechanism

n Ideally

suited for a Quadrax cable production break where space is limited

Contact TE for additional information on any of these custom solutions. 26 Catalog 1654012 Dimensions are in Revised 2/12 inches (mm) unless otherwise specified. www.te.com





Part Number Index

Part No.

Page

Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated.

Part No. CEC-RWC-18634 CEC-RWC-18664 CEC-RWC-18666 CEC-RWC-20555 CEC-RWC-20333 CEC-RWC-18658 CEC-RWC-18687 CEC-RWC-18665 CEC-RWC-18680 CEC-RWC-18681 CEC-RWC-18682 CEC-RWC-18684 CEC-RWC-18685 CEC-RWC-18686 CEC-RWC-20412 CEC-RWC-21064 CEC-RWC-20638 CEC-RWC-20837 CEC-RWC-21088 1445626 1445692 1445693 1484406 1484407 1484620 1484621 1604798 1604799 1604800 1604874 1604896 1604897 1604898 1604905

Page

22 22 22 22 22 23 23 23 24 24 24 24 24 24 25 25 25 25 25 5, 7 5, 7 5, 7 10 10 10 10 12, 13 12, 15 12, 13 12 12 12 12 16

Part No. 1604940 1604972 1663018 1663019 1663032 1663900 1738592 1738894 1738916 1738949 1738950 1738951 1738955 1738974 1811010 1811184 1811269 1811481 1811633 1811865 1811866 1811901 1811902 1811927 1811928 1811943 1877039 1877040 1877384 1877732 1877774 1877775 1877921 1950030

Page

7

14 10 10 10 10 12, 13 9 16 12, 13 12, 13 12, 13 12 16, 18 6 16, 17 6 9 9 6, 8 6, 8 16, 19 16, 18 16, 20 16, 20 9 5 5 16 16, 18 16, 17 16, 17 16, 19 14

Part No.

Page

1954353 1954355 1954576 1954577 1996373 1996500 1996544 2000314 2000317 2000263 2101395 2101752 212447 2157322 2157455 2157694 2157695 2157696 811262

16, 19 16, 19 6, 8 16, 20 14 26 14 15 15 15 16, 20 14 15 14 16, 18 16, 17 16, 18 16, 19 14





FOR MORE INFORMATION Technical Support Internet: USA: Canada: Mexico: C. America: South America: Germany: Great Britain: France: Netherlands: China:

www.te.com/ADM +1 (800) 522-6752 +1 (905) 470-4425 +52 (0) 55-1106-0814 +52 (0) 55-1106-0814 +55 (0) 11-2103-6000 +49 (0) 6251-133-1999 +44 (0) 8706-080208 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015

Follow us on Twitter for all the latest product news @TEConnectivity, and on Facebook, TEConnectivity.

www.te.com/ADM © 2012 Tyco Electronics Corporation. All Rights Reserved. 1654012 ADM 5M 02/2012 TE Connectivity, and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.