Supporting Information for

1 downloads 0 Views 748KB Size Report
Supplementary Figure 2. Photodetector characterization of MAPbCl3, MAPbBr3 and MAPb(Br/I)3 perovskite SCs: (a) photoresponse vs. bias voltage; (b) dark ...
Supporting Information for

Non-dissipative internal optical filtering with solution-grown perovskite single crystals for full-colour imaging

Sergii Yakunin, 1,2 Yevhen Shynkarenko, 1,3 Dmitry N. Dirin,1, 2 Ihor Cherniukh,1,2 and Maksym V. Kovalenko*1,2 1

Laboratory of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland

2

Laboratory for Thin Films and Photovoltaics, Empa – Swiss Federal Laboratories for Materials Science and Technology, CH-8600 Dübendorf, Switzerland 3

Department of Photonic Processes, Institute of Physics, National Academy of Sciences of Ukraine, 46 Prospekt Nauky, Kyiv 03680, Ukraine

*

E-mail: [email protected]

S1

Supplementary Figure 1. Photoconductivity spectra of active perovskite layers: thin 15 µm films and SCs in stand-alone and stacked configurations: (a) MAPbCl3; (b) MAPbBr3; (c) MAPb(Br/I)3 and MAPbI3 thin film. S2

Supplementary Figure 2. Photodetector characterization of MAPbCl3, MAPbBr3 and MAPb(Br/I)3 perovskite SCs: (a) photoresponse vs. bias voltage; (b) dark current vs. bias voltage; (c) photoresponse vs. insident light intensity; (d) photoresponse vs. light modulation frequency.

S3

Supplementary Figure 3. Photodetector characterization of MAPbCl3, MAPbBr3 and MAPbI3 perovskite thin (15 µm) active layers: (a) photoresponse vs. bias voltage; (b) dark current vs. bias voltage; (c) photoresponse vs. insident light intensity; (d) photoresponse vs. light modulation frequency.

S4