IEC 62031:2008 (1 st. Edition). The tested samples of the above products are in
conformity with the technical provisions of the. Following European Directive -.
PRODUC CT SAFE ETY ENG GINEERIN NG, INC. 1, No. 80, Se ec. 2 Guang Fu Rd., San n Chung Dis st., New Taip pei City, 2411, Taiwan 9F-1 TEL L : +886-2-85 5123188 FAX : +886 6-2-2995916 69 E-MAIL L: service@ @psemail.com m.tw
L LV VD DR Re ep po ortt GENE ERFEU U Ligh hting Techno T ology Corp
GF-TUB--2F12, GF-TUB-4Fxx (w where xx=24 for 240pcs LED chips, xx=25 for 256pcs LED chips)
PS SE100-033 36
PSE INC. TAIWAN 9F-1 No. 80, Sec. 2, Guang Fu Rd., San Chung Dist., New Taipei City 241, Taiwan Tel:+886-2-85123188 Fax:+886-2-29959169
Certificate of Compliance Low Voltage Directive 2006/95/EC Certificate Number: PSE100-0336 Manufacturer : GENERFEU Lighting Technology Corp No. 155 Xianghe Rd.,Tanzi Dist.,Taichung City 427 Taiwan Product
: AC LED Tube
Model/Type : GF-TUB-2F12, GF-TUB-4Fxx (where xx=24 for 240pcs LED chips, xx=25 for 256pcs LED chips) Electrical Rating: 100-240Vac, 50/60Hz, 9W (for GF-TUB-2F12) 100-240Vac, 50/60Hz, 18W (for GF-TUB-4Fxx) Trade Mark: Standards applied: IEC 62031:2008 (1st Edition) and/or IEC 62031:2008 (1st Edition) The tested samples of the above products are in conformity with the technical provisions of the Following European Directive - Low Voltage Directive 2006/95/EC Date Issued: 2011-11-22
Approve & Authorized Signer: Jeff Chang
EU Declara D ation of Conforrmity According g to the Low w Voltage Directive D 2006/95/EC Forr the follow wing equipm ment: Prooduct: AC LED Tube T Tyype Designaation/Tradeemark:
GF-TUB-2 2F12, GF-T TUB-4Fxx ((where xx= =24 for 240pcss LED chips, xx=25 foor 256pcs LED L chips)
Maanufacturer’s Name:
GENERFE EU Lightin ng Technoloogy Corp
Maanufacturer’s Address:
No. 155 Xiianghe Rd.,Tanzi Distt.,Taichung g City 427 Taiwan T
is h herewith con nfirmed to comply c with the requireements set ou ut in the Coouncil Directtive 20006/95/EC forr electrical equipment e u used within certain voltage limits. F For the evaaluation of the complian nce with thiss Directives,, the followin ng standardds were appllied: IEC C 62031:20008 (1st Edition) and/or IEC C 62031:20008 (1st Edition) Ressponsible foor making th his declaratiion is the :
Autthorized reepresentativ ve establish hed within the EU Au uthorized reepresentatiive establisshed within n the EU (iff applicablee) : ________ ____________________ __________ ___ Company Nam me : ________ ____________________ __________ ___ Coompany Ad ddress : ________ ____________________ __________ ___ Maanufacturer
Perrson responssible for ma aking this deeclaration
Possition/Titlee : ___________
________ ____________________ __________ ___ ________ ____________________ __________ ___ _____ ___________ ____ __________ ____________________ ___
(Plaace)
(Date)
Name, Surnam me :
(Company stamp and legal l signature)
INDEX
TEST REPORT
1 TEST RESULTS CALCULATIONS
2
USER’S INSTRUCTION PHOTOS
3
DESIGN TECHNICAL CONSTRUCTION
4
Test T t Rep portt
PS SE100-033 36
TEST REPORT IEC 62031
LED modules for general lighting – Safety specifications Report Reference No...................... :
PSE100-0336
Date of issue .................................... :
2011-11-22
Total number of pages ......................
23
Testing Laboratory ......................... :
Product Safety Engineering Inc. Taiwan
Address ............................................ :
9F-1, No. 80, Sec. 2, Guang Fu Rd., San Chung Dist., New Taipei City 241, Taiwan
Applicant’s name............................ :
GENERFEU Lighting Technology Corp
Address ............................................ :
No. 155 Xianghe Rd.,Tanzi Dist.,Taichung City 427 Taiwan
Manufacturer’s name ..................... :
GENERFEU Lighting Technology Corp
Address ............................................ :
No. 155 Xianghe Rd.,Tanzi Dist.,Taichung City 427 Taiwan
Test specification: Standard ........................................... :
IEC 62031:2008 (1st Edition) EN 62031:2008 (1st Edition)
Test procedure ................................. :
LVD of CE
Non-standard test method…………..:
N/A
Test Report Form No...................... :
IEC62031A
Test Report Form(s) Originator ........ :
Nemko AS
Master TRF ...................................... :
Dated 2008-10
Copyright © 2008 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description:
AC LED Tube
Trade Mark ....................................... : Manufacturer .................................... :
GENERFEU Lighting Technology Corp No. 155 Xianghe Rd.,Tanzi Dist.,Taichung City 427 Taiwan
Model/Type reference ...................... :
1) GF-TUB-2F12 2) GF-TUB-4Fxx (where xx=24 for 240pcs LED chips, xx=25 for 256pcs LED chips)
Ratings ............................................. :
1) 2)
100-240Vac, 50/60Hz, 9W (for GF-TUB-2F12) 100-240Vac, 50/60Hz, 18W (for GF-TUB-4Fxx)
Page 2 of 23 Report No.PSE100-0336 Testing procedure and testing location: CB Testing Laboratory: Testing location/ address ...................... : Associated CB Test Laboratory: Testing location/ address ...................... : Tested by (name + signature) ..... :
Jacky Hus
Approved by (+ signature) ........... : Jeff Chang _____________________________ Testing procedure: TMP Tested by (name + signature) ..... : Approved by (+ signature) ............ : Testing location/ address ...................... : Testing procedure: WMT Tested by (name + signature) ..... : Witnessed by (+ signature) .......... : Approved by (+ signature) ........... : Testing location/ address ...................... : Testing procedure: SMT Tested by (name + signature) ..... : Approved by (+ signature) ............ : Supervised by (+ signature) ........ : Testing location/ address ................ : Testing procedure: RMT Tested by (name + signature) ..... : Approved by (+ signature) ............ : Supervised by (+ signature) ........ : Testing location/ address ...................... :
TRF No. IEC62031A
Page 3 of 23 Report No.PSE100 0-0336 mmary of tes sting: Sum Tests performe ed (name of test and tes st clause):
Testing lo ocation: Prodduct Safety Engineering E Inc. Taiwan at 9F-1, No. 800, Sec. 2, Gu uang Fu Rd., San Chung Dis st., New Taippei City 241, Taiwan
Sum mmary of co ompliance with w Nationall Differences: Europe
Cop py of markin ng plate
W Where model can be GF-T TUB-4Fxx (w where xx=24 for 240pcs LED L chips, xxx=25 for 256 6pcs LED chips)
TRF No. IEC6203 31A
Page 4 of 23 Report No.PSE100-0336 Test item particulars .................................................. : LED Tube Classification of installation and use............................ : Independent Supply Connection ....................................................... : Double-Capped ...................................................................................... : ...................................................................................... : Possible test case verdicts: - test case does not apply to the test object ................. : N/A - test object does meet the requirement ....................... : P (Pass) - test object does not meet the requirement................. : F (Fail) Testing .......................................................................... : Date of receipt of test item ............................................ : 2010-08-24 Date (s) of performance of tests ................................... : 2010-08-24 – 2011-11-22 General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma (point) is used as the decimal separator. General product information: Model Differences: Part Model
Wattage
Tube Length
LED Module
GF-TUB-4Fxx (where xx=24)
18W
4 Feet
A (240pcs of LED)
GF-TUB-4Fxx (where xx=25)
18W
4 Feet
A (256pcs of LED)
GF-TUB-2F12
9W
2 Feet
B (120pcs of LED)
TRF No. IEC62031A
Page 5 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
4
GENERAL REQUIREMENTS
4.4
Integral modules treated as part of luminaires defined in clause 0.5 of IEC 60598-1
Self-ballasted LED lamp, Not integral module.
4.5
Independent modules complies with requirements in IEC 60598-1
Self-ballasted LED lamp.
5
GENERAL TEST REQUIREMENTS
5.5
SELV-operated LED modules comply with Annex I of IEC 61347-2-13
6
CLASSIFICATION
P
P Not SELV-operated LED modules.
P
Built-in module ………………………………………...: Yes
No
Independent module ………………………………….: Yes
No
Integral module ………………………………………..: Yes
No
For Integral module; Note to 1.2.1 in IEC 60598-1 applies.
Not Integral module.
LED modules with integrated control gear and equipped with a lamp cap
Self-ballasted LED lamp
7
MARKING
P
7.1
Mandatory markings ………………………………….: See below.
P
- mark of origin ………………………………………..:
P
- model number, type reference …………………….: 1) 2)
GF-TUB-2F12 GF-TUB-4Fxx (where xx=24 for 240pcs LED chips, xx=25 for 256pcs LED chips)
P
- rated supply voltage (V) …………………………….: 100-240Vac
P
- rated supply current (A) …………………………….: See manual.
P
- rated input power (V) ……………………………….: 1) 2)
9W (for GF-TUB-2F12) 18W (for GF-TUB-4Fxx)
P
- nominal power
1) 2)
9W (for GF-TUB-2F12) 18W (for GF-TUB-4Fxx)
P
- indication of connections, wiring diagram
Self-ballasted LED lamp
N/A
- value of tc
No tc provided.
N/A
- eye protection
Complied.
TRF No. IEC62031A
P
Page 6 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
- marking of built-in modules only
Not built-in modules.
7.2
- location of marking
Cap and manual.
P
7.3
Marking durable and legible
See below.
P
Rubbing 15 s water, marking legible
The labels were subjected to the permanence of marking test. The labels were rubbed with cloth soaked with water for 15 s and then again for 15 s with the cloth soaked with petroleum spirit. After this test there was no damage to the labels. The marking on the labels did not fade. There was no curling or lifting of the label's edges.
P
SCREW TERMINALS
No screw terminals provided.
N/A
Compliance with section 14 of IEC 60598-1
Same as above.
N/A
SCREWLESS TERMINALS
Same as above.
N/A
Compliance with section 15 of IEC 60598-1
Same as above.
N/A
CONNECTORS
Same as above.
N/A
Compliance with IEC 60838-2-2
Same as above.
N/A
8
9
Verdict N/A
PROVISION FOR PROTECTIVE EARTHING
N/A
External metal parts connected to the earth terminal:
N/A
- compliance with 7.2.1 in IEC 60598-1
No earthing provided.
N/A
Same as above. Test with a current of 10 A between earthing terminal and each of the accessible metal parts; measured resistance (): < 0,5 ………………….:
N/A
Protective earth, symbol
Same as above.
N/A
Terminal complying with clause 8 in Part 1
Same as above.
N/A
Locked against loosening and not possible to loosen by hand
Same as above.
N/A
Not possible to loosen clamping means unintentionally on screwless terminals
Same as above.
N/A
Earthing via means of fixing
Same as above.
N/A
Earthing terminal only used for the earthing of the control gear
Same as above.
N/A
All parts of material minimizing the danger of
Same as above.
N/A
TRF No. IEC62031A
Page 7 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
Made of brass or equivalent material
Same as above.
N/A
Contact surface bare metal
Same as above.
N/A
Conductors by tracks on printed circuit boards:
Same as above.
N/A
- a.c. current of 25 A for 1 min between earthing terminal and accessible metal parts
Same as above.
N/A
- compliance with clause 7.2.1 in IEC 60598-1
Same as above.
N/A
electrolytic corrosion
8 (10)
PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS
P
Protection against accidental contact with live parts in compliance with IEC 61347-1 (clause numbers between parentheses refer to IEC 61347-1)
P
- (10.1)
Controlgear protected against accidental contact with live parts
P
- (A1)
Current measured according to IEC 60990, figure 4 1) and clause 7.1: max. 0,7 mA (peak) or 2,0 mA d.c., for f 1000 Hz max. 70 mA …………………………: 2)
Complied.
3) - (A2)
Voltage at 50 k (V): max. 34 V (peak) ……………: 1) 2) 3)
Metal enclosure: 115mV (peak) / 500 = 0.23mA (peak) Plastic enclosure with foil: 103mV (peak) / 500 = 0.21mA (peak) Output:630mV(peak) / 500 = 1.26mA (peak)
P
Metal enclosure: 4V (peak) Plastic enclosure with foil:0.46V (peak) Output:14V(peak)
P
Lacquer or enamel not used for protection or insulation
Not used.
P
Adequate mechanical strength on parts providing protection
Complied.
P
- (10.2)
Total capacitance not Capacitors > 0,5 F: voltage after 1 min (V): < 50 V …………………………………………………….: exceeding 0,5F.
N/A
8.1 (-)
SELV-equivalent controlgear accessible parts are insulated from live parts by double or reinforced insulation according 8.6 and 13.1 in IEC 60065
Not SELV-equivalent controlgear.
N/A
8.2 (-)
Exposed terminals of SELV or SELV-equivalent controlgear are allowed if: - the rated or maximum output voltage does not exceeding 25 V r.m.s. - the no-load output voltage does not exceed 30 V r.m.s. or 33 √2 V peak
No exposed terminals provided.
N/A
TRF No. IEC62031A
Page 8 of 23 Report No.PSE100-0336 IEC 62031 Clause
11
12
Requirement + Test
Result - Remark
Verdict
Insulated terminals if rated output voltage >25 V
Same as above.
N/A
One capacitor Y1 or two capacitors Y2 of the same values used in series between SELV or SELVequivalent output and primary circuits - Capacitor complying with IEC 60384-14 - Other components bridging the separating transformer complying with EN 60065, clause 14
Same as above.
N/A
MOISTURE RESISTANCE AND INSULATION
P
Protection against moisture and insulation in compliance with Clause 11, IEC 61347-1
P
After storage 48 h at 91-95% relative humidity and Humidity treatment performed after storage 48 h at 93% and 20-30 C measuring of insulation resistance with d.c. 500 V (M): 2 M ……………………………..: 25°C. Between different polarity: measured: 9999 M. (more than 2MΩ).
P
Adequate insulation between input and output terminals not bounded together in SELV-equivalent controlgear
Self-ballasted lamp, not for SELV-equivalent controlgear.
P
For double or reinforced insulation the resistance exceeds 4 M
Humidity treatment performed after storage 48 h at 93% and 25°C. 1) Live part (Primary) / Metal enclosure measured: 2449 M. (more than 4MΩ). 2) Live part (Primary) / Lampshade plastic enclosure with foil: measured: 9999 M. (more than 4MΩ). 3) Live part (Primary) / Input connector with foil: measured: 9999 M. (more than 4MΩ).
N/A
ELECTRIC STRENGTH
P
Electric strength in compliance with Clause 12 of IEC 61347-1
P
Immediately after clause 11 electric strength test for 1 min
P
Working voltage 42 V, test voltage 500 V
Connect to main power.
Working voltage > 42 V, test voltage (V): Between different polarity: 2U + 1000 V …………………………………………...: Test with voltage 1875Vac. TRF No. IEC62031A
N/A P
Page 9 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Reinforced insulation, test voltage (V) ……………...: 1)
2)
3)
Live part (Primary) / Metal enclosure Test with voltage 3750Vac. Live part (Primary) / Lampshade plastic enclosure with foil: Test with voltage 3750Vac. Live part (Primary) / Input connector with foil: Test with voltage 3750Vac.
No flashover or breakdown
Complied.
Windings in separating transformers in SELVequivalent control gear according to 14.3.2 of EN 60065
Not SELV-equivalent control gear
Verdict P
P N/A
13
FAULT CONDITIONS
P
13.1
In compliance with IEC 61347-1 (clause numbers between parentheses refer to IEC 61347-1)
P
When operated under fault conditions the LED-module:
P
- does not emit flames or molten material
Complied.
P
- does not produce flammable gases
Complied.
P
- protection against accidental contact not impaired
Complied.
P
Thermally protected controlgear does not exceed the marked temperature value
Complied.
P
Fault conditions: capacitors, resistors or inductors without proof of compliance with relevant specifications have been short-circuited or disconnected
(see appended table)
P
Short-circuit of creepage distances and clearances if less than specified in clause 16 in Part 1 (except between live parts and accessible metal parts)
Not used.
N/A
Distances on printed boards provided with coating according to IEC 60664-3
Same as above.
N/A
- (14.2)
Short-circuit or interruption of semiconductor devices
(see appended table)
P
- (14.3)
Short-circuit across insulation consisting of lacquer, (see appended table) enamel or textile
P
- (14.4)
Short-circuit across electrolytic capacitors
(see appended table)
P
- (14.5)
During the tests, a five-layer tissue paper, where
Complied.
P
- (14.1)
TRF No. IEC62031A
Page 10 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
the test specimen is wrapped, does not ignite
13.2
15
After the tests the insulation resistance with d.c. More than 100MΩ. 500 V (M) are 1 M ………………………………:
P
Temperature declared thermally protected LEDmodules fulfil the requirements in Annex C of IEC 61437-1
Complied.
P
Module withstands overpower condition >15 min.
Complied.
P
Module with automatic protective device or power limiter, test performed 15 min. at limit.
Complied.
P
During the tests, tissue paper, spread below module, does not ignite
Complied.
P
CONSTRUCTION Wood, cotton, silk, paper and similar fibrous material not used as insulation
16
17 (17)
P Complied.
P
CREEPAGE DISTANCES AND CLEARANCES
P
Creepage and distances and clearances in compliance with IEC 60598-1
P
Class of protection ……………………………………: Class II
—
Working voltage (V) …………………………………..: 7.0mm (mm) ……………………………………………………: cl:>7.0mm
P
(3) Parts becoming live: cr (mm); cl (mm) ………….: No such part provided.
N/A
(4) Outer surface of cable: cr (mm); cl (mm) ………: No cable provided.
N/A
(5) Live parts of switches: cr (mm); cl (mm) ……….: No switch provided.
N/A
SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS
P
Screws, current-carrying parts and connections in compliance with IEC 60598-1 (clause numbers between parentheses refer to IEC 60598-1)
P
(4.11)
Electrical connections:
P
(4.11.1)
Contact pressure
TRF No. IEC62031A
Complied.
P
Page 11 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
(4.11.2)
Screws:
(4.11.3)
Result - Remark
Verdict P
- self-tapping screws
No screw provided.
N/A
- thread-cutting screws
Same as above.
N/A
- at least two self-tapping screws
Same as above.
N/A
Screw locking:
N/A
- spring washer
Same as above.
N/A
- rivets
Same as above.
N/A
(4.11.4)
Material of current-carrying parts
Same as above.
N/A
(4.11.5)
No contact to wood
Same as above.
N/A
(4.12)
Mechanical connections and glands:
(4.12.1)
Mechanical stress
Same as above.
N/A
Screws not made of soft metal
Same as above.
N/A
Screws of insulating material
Same as above.
N/A
Torque test: part; torque (Nm) ………………………: Same as above.
N/A
(4.12.2)
Screw diameter < 3 mm screwed into metal
Same as above.
N/A
(4.12.3)
Void
--
(4.12.4)
Locked connections
Same as above.
N/A
(4.12.5)
Screwed glands: force (N) …………………………...: Same as above.
N/A
18 (18)
RESISTANCE TO HEAT, FIRE AND TRACKING
P
Resistance to Heat, Fire and Tracking in compliance with IEC 61347-1 (clause numbers between parentheses refer to IEC 61347-1)
P
(18.1)
N/A
Parts of insulating material retaining live parts in position, ball-pressure test:
N/A
- part; test temperature (C) ………………………….: No such part.
N/A
- part; test temperature (C) ………………………….: --
N/A
(18.2)
Printed boards in accordance with IEC 60249-1, 4.3 Approved PWB used.
P
(18.3)
External parts of insulating material preventing electric shock glow-wire test 650 C
P
(18.4)
Parts of insulating material retaining live parts in position, needle-flame test 10 s:
Compliance checked.
P
- flame extinguished within 30 s
No such part.
N/A
- no flaming drops igniting tissue paper
No such part.
N/A
(18.5)
Tracking test
No such voltage.
N/A
19
RESISTANCE TO CORROSION
TRF No. IEC62031A
P
Page 12 of 23 Report No.PSE100-0336 IEC 62031 Clause
1.5.1
Requirement + Test
Result - Remark
Verdict
Resistance to corrosion in compliance with IEC 61347-1
P
Rust protection:
P
- test according 4.18.1 of IEC 60598-1
Complied.
P
- adequate varnish on the outer surface
Complied.
P
TABLE: list of critical components
P
object/part No.
manufacturer/ trademark
type/model
technical data
standard
mark(s) of conformity1)
Enclosure
Chi Mei Corporation
PC-110V
Min. V-2 or better, 1.5 mm thick, Min.105°C.
UL 94
UL
Plastic Chi Lin Enclosure (Cap) Technology Co Ltd
FC-005
Min. V-0 or better, 1.5 mm thick, Min.80°C.
UL 94
UL
Cap
--
--
--
IEC/EN 60061
--
LED Board
--
--
Min. V-1 or better, 105°C
UL 796, UL 746 UL
LED
Harvatek
HT-U169BP
2.9-3.7V, 20mA --
--
Harvatek
HT-U158BP
2.9-3.7V, 20mA --
--
Osram
LUW JNSH.EC- 2.8-3.4V, 20mA -BRBT-5C8E-1
--
Internal wire (AC)
--
--
24AWG, 105°C
UL 758
UL
Internal wire (DC)
--
--
24AWG, 105°C
UL 758
UL
Power
GENERFEU Lighting Technology Corp
GFTB16W3020 -16S16P
--
Test by AC LED TUBE
-- PCB
--
--
Min. V-1, Min 105°C
UL 796, UL 94
UL
-- Fuse (F1) (For GF-TUB4Fxx)
WickmannWerke GmbH
392
T2A, 250V
IEC/EN60127-1 VDE IEC/EN60127-3
Conquer Electronics Co Ltd
PTU
T2A, 250V
IEC/EN60127-1 VDE IEC/EN60127-3
Littelfuse Wickmann Werke
TE5
T2A, 250V
UL 248
TRF No. IEC62031A
UL
Page 13 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
object/part No.
Result - Remark
Verdict
type/model
technical data
standard
MST
T1A, 250V
IEC/EN60127-1 VDE IEC/EN60127-3
WickmannWerke GmbH
392
T1A, 250V
IEC/EN60127-1 VDE IEC/EN60127-3
Littelfuse Wickmann Werke
TE5
T1A, 250V
UL 248
UL
manufacturer/ trademark
-- (For GF-TUB- Conquer 2F12) Electronics Co Ltd
mark(s) of conformity1)
-- Choke (L1) (on EMI board)
Mingstar TC5026BNElectronic Corp. 471M
130°C
--
--
-- Varistor (RV1)
Centra Science
CNR07D471K
300 Vac, 385Vdc, 85°C
IEC/EN 610511, IEC/EN 61051-2, IEC/EN 610512-2
VDE
-- Bridge Diode (BR1)
--
--
Min. 600V, 0.8A --
--
-- Choke (L1) (on driver)
Mingstar Electronic Corp
RL0875N-152K
130°C
--
--
-- Choke (L2)
Mingstar Electronic Corp
RL0875N-152K
130°C
--
--
-- Choke (L3)
Mingstar Electronic Corp
EE13N-681N
105°C
--
--
-- Storage Capacitor (C5)
--
--
1uF, min. 400V
--
--
-- Storage Capacitor (C4)
--
--
100uF, min. 63V
--
--
-- Transistor (Q1)
--
--
500V, 0.05A
--
--
-- Insulation tape
--
--
105°C
UL 510
UL
1
) an asterisk indicates a mark which assures the agreed level of surveillance
TRF No. IEC62031A
Page 14 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
14
TABLE: tests of fault conditions
Part
Simulated fault
Result - Remark
Verdict P Hazard
Model No.: GF-TUB-4F24 with 90Vac, 50Hz 90Vac, 50Hz BD1
After short, F1 opened. No hazardous
No
C2
After short, F1 opened. No hazardous
No
Q1 C-E
After short, Unit shutdown. No hazardous, No breakdown.
No
Output
After short, Unit cycle protection. No hazardous, No breakdown.
No
Model No.: GF-TUB-4F24 with 264Vac, 50Hz BD1
After short, F1 opened. No hazardous
No
C2
After short, F1 opened. No hazardous
No
Q1 C-E
After short, Unit shutdown. No hazardous, No breakdown.
No
Output
After short, Unit cycle protection. No hazardous, No breakdown.
No
TRF No. IEC62031A
Page 15 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
A
ANNEX A - TESTS All tests performed in accordance with the advise given in Annex H of IEC 61347-1, if applicable
B
Result - Remark
Verdict P
Compiled.
P
ANNEX B - SELV-operated LED modules
N/A
ANNEX I of IEC 61347-2-13 - PARTICULAR ADDITIONAL REQUIREMENTS FOR INDEPENDENT SELV D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS
N/A
I.3
Classification
I.3.1
Class I
Yes
No
Class II
Yes
No
a) non-inherently short circuit proof controlgear
Yes
No
b) non-inherently open circuit proof controlgear
Yes
No
c) inherently short circuit proof controlgear
Yes
No
d) inherently short circuit proof controlgear
Yes
No
e) fail safe controlgear
Yes
No
f) non-short-circuit proof controlgear
Yes
No
g) non-open-circuit proof controlgear
Yes
No
I.3.2
I.4
Marking Adequate symbols are used
N/A Not SELV-operated LED modules.
N/A
I.5
Protection against electric shock
I.5.1
No connection between output winding and body
Same as above.
N/A
No connection between output winding and protective earthing circuit
Same as above.
N/A
I.5.2
Input and output circuits electrically separated from each other
Same as above.
N/A
I.5.2.1
Insulation between input and output winding of the HF-transformer consists of double or reinforced insulation
Same as above.
N/A
Class II: insulation between input/output and body consists of double or reinforced insulation
Same as above.
N/A
Class I: insulation between input and body consists of basic and between output and body supplementary insulation
Same as above.
N/A
Insulation between input and output winding via the Same as above.
N/A
I.5.2.2
TRF No. IEC62031A
N/A
Page 16 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
Insulation between cord and windings of the HDtransformer consists of basic insulation
Same as above.
N/A
I.5.2.3
Serrated tape, additional layer
Same as above.
N/A
I.5.2.4
Class I controlgear for fixed connection provided with basic insulation plus protective screening comply with the following conditions:
Same as above.
N/A
a) Insulation between the input winding and the protective screen complies with the requirements for basic insulation
Same as above.
N/A
b) Insulation between the protective screen and the Same as above. output winding complies with the requirements for basic insulation
N/A
c) Metal screen consists of a metal foil or of a wire wound screen
Same as above.
N/A
d) Metal screen so arranged that both edges cannot Same as above. simultaneously touch a magnetic core
N/A
e) Metal screen and its lead-out wire have a crosssection sufficient to ensure that an overload device will open the circuit before the screen is destroyed
Same as above.
N/A
f) Lead-out wire sufficiently fixed to the metal screen
Same as above.
N/A
Last turn of each winding of the transformer retained by positive means
Same as above.
N/A
Impregnated winding
Same as above.
N/A
Winding held together by means of insulating material
Same as above.
N/A
I.5.3
Components bridging between input and output circuit
Same as above.
N/A
I.5.3.1
Used capacitors and resistors comply with 8.2
Same as above.
N/A
I.5.3.2
Used opto-couplers
Same as above.
N/A
I.6
Heating
I.6.1
No excessive temperatures in normal use
core consists of double or reinforced insulation
I.5.2.5
Same as above.
N/A
_____
Same as above.
_______
Same as above.
Upri: 1.06 time supply rated voltage
Same as above.
Determined temperature rises in windings: - Primary: _____ K - Limit max: _____ K - Secondary: _____ K
Same as above.
N/A
Used material classified as Class Stated value of ta I.6.2
N/A
TRF No. IEC62031A
Page 17 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
Same as above.
N/A
- no connections have worked loose
Same as above.
N/A
- no reduction of creepage distances and clearances - no flow of sealing compound
Same as above.
N/A
Same as above.
N/A
- no operation of protecting devices
Same as above.
N/A
Same as above.
N/A
I.6.3
- electric strength test between input and output windings Cycling test (10 cycles):
Same as above.
N/A
I.6.3.1
- heat run at
Same as above.
N/A
I.6.3.2
- moisture treatment 48 h
Same as above.
N/A
I.6.3.3
- vibration test 1 h; 1,5 g
Same as above.
N/A
I.6.3.4
After the tests:
Same as above.
N/A
- insulation resistance
Same as above.
N/A
- dielectric strength test at 35 % of specified value; Same as above. test voltage _____ V - Current or the ohmic component does not Same as above. deviates by more than 30 % Short-circuit and overload protection
N/A
- Limit max: After the test:
I.7 I.7.1 I.7.2 I.7.3 I.7.4
_____ K
_____ K
N/A N/A
Upri: 1.06 times rated voltage or 0.94 and 1.06 times rated supply voltage - used voltage _____ V Determined temperature rise in windings and on other parts:
Same as above.
N/A
Same as above.
N/A
- test according to Clause
______
Same as above.
N/A
- Primary winding
______ K
Same as above.
N/A
- Limit max
______ K
Same as above.
N/A
- Secondary winding
______ K
Same as above.
N/A
- Limit max
______ K
Same as above.
N/A
- External enclosure
______ K
Same as above.
N/A
80 K
Same as above.
N/A
______ K
Same as above.
N/A
60 K
Same as above.
N/A
______ K
Same as above.
N/A
- Limit max
60 K
Same as above.
N/A
- Supports
______ K
Same as above.
N/A
- Limit max - Rubber insulation of wiring - Limit max - PVC insulation of wiring
TRF No. IEC62031A
Page 18 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test - Limit max
80 K
Result - Remark
Verdict
Same as above.
N/A
Same as above.
N/A
I.7.5
Fail-safe convertors
I.7.5.1
- Upri: 1.06 times rated supply voltage ............. V: Same as above.
- Isec: 1.5 times rated output current................. A: Same as above.
- time until steady-state conditions t1 (h) ............. : Same as above.
- time until failure t2 (h): < t1; < 5 h .................... : Same as above.
N/A
During the test:
Same as above.
N/A
- no flames, molten material, etc.
Same as above.
N/A
- temperature rise of enclosure < 150 K
Same as above.
N/A
- temperature rise of plywood support < 100 K
Same as above.
N/A
I.7.5.2
After the test:
N/A Same as above.
N/A
Same as above.
N/A
I.8
- electric strength (test voltage; 35 % of specified value); no flashover or breakdown for primary-tosecondary and for primary-to-body - live parts not accessible by test finger through holes of enclosure Insulation resistance and electric strength
Same as above.
N/A
I.8.1
Conditioned 48 h between 91 % and 95 %
Same as above.
N/A
I.8.2
Adequate insulation (500 V d.c. for 1 min) between:
N/A
Live parts and the body -for basic insulation not Same as above. less than 2 M ....................................................... :
N/A
Live parts and the body -for reinforced insulation Same as above. not less than 4 M ................................................. :
N/A
Input- and output circuits not less than 5 M ........ : Same as above.
N/A
Same as above. Metal parts of class II controlgear which are separated from live parts by basic insulation only and the body not less than 5 M ........................... :
N/A
Same as above. Metal foil in contact with the inner and outer surfaces of enclosures of insulating material not less than 2 M ....................................................... :
N/A
Electric strength test:
N/A
1) Between live parts of input circuits and live parts Same as above. of output circuits...................................................... :
N/A
2) Over basic or supplementary insulation between:
N/A
a) live parts which are or may become of different Same as above. polarity ................................................................ :
N/A
b) live parts and enclosure if intended to be Same as above. connected to protective earth ............................. :
N/A
I.8.3
TRF No. IEC62031A
Page 19 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
c) accessible metal parts and a metal rod of the Same as above. same diameter as the flexible cable or cord ........... :
N/A
d) live parts and an intermediate metal part ........... : Same as above.
N/A
e) intermediate metal parts and the body ............... : Same as above.
N/A
3) Over reinforced insulation between the body and Same as above. live parts ................................................................. :
N/A
No flashover or breakdown occurred
N/A
Same as above.
I.9
Construction
I.9.1
Comply with all requirements
Same as above.
N/A
I.9.2
The distance between input and output terminals Same as above. shall not be less than 25 mm .................................. :
N/A
I.10
Components
N/A
I.10.1
Socket-outlets in the output circuit does not accept Same as above. plugs complying with IEC 60083 and IEC 60906-1 Self-resetting devices shall not be used unless it is Same as above. certain that there will be no hazards Compliance is checked by connecting the Same as above. controlgear for 48 h at 1.06 times the rated voltage with the output short-circuited Creepage distances and clearances
N/A
N/A
1.
N/A
I.10.2
I.11
N/A
Insulation between input and output circuits:
N/A N/A
a) measured values > specified values (mm) ......... :
Same as above.
N/A
b) measured values > specified values (mm) ......... :
Same as above.
N/A
c) measured values > specified values (mm) ......... :
Same as above.
N/A
2. Insulation between adjacent input circuits: measured values > specified values (mm) ......... :
Same as above.
N/A
2. Insulation between adjacent output circuits: measured values > specified values (mm) ......... :
Same as above.
N/A
3.
Insulation between terminals for external connection:
N/A
a) measured values > specified values (mm) ......... : Same as above.
N/A
b) measured values > specified values (mm) ......... : Same as above.
N/A
c) measured values > specified values (mm) ......... : Same as above.
N/A
4. Basic or supplementary insulation:
Same as above.
N/A
a) measured values > specified values (mm) ......... : Same as above.
N/A
b) measured values > specified values (mm) ......... : Same as above.
N/A
c) measured values > specified values (mm) ......... : Same as above.
N/A
Same as above. 5. Reinforced insulation: measured values > specified values (mm) ............................................. :
N/A
TRF No. IEC62031A
Page 20 of 23 Report No.PSE100-0336 IEC 62031 Clause
Requirement + Test
Result - Remark
Verdict
6. Distances through insulation:
Same as above.
N/A
a) measured values > specified values (mm) ......... : Same as above.
N/A
b) measured values > specified values (mm) ......... : Same as above.
N/A
c) measured values > specified values (mm) ......... : Same as above.
N/A
a) measured values > specified values (mm) ......... : Same as above.
N/A
TABLE: Electrical data (in normal conditions) U (V)
I (A)
Irated (W)
P (W)
Fuse #
P Ifuse (A)
Model No.: GF-TUB-4F24 90Vac / 50Hz
0.19
--
17.4
F1
0.19
100Vac / 50Hz
0.17
18
17.6
F1
0.17
240Vac / 50Hz
0.07
18
16.8
F1
0.07
254Vac / 50Hz
0.07
--
16.5
F1
0.07
264Vac / 50Hz
0.06
--
16.3
F1
0.06
90Vac / 60Hz
0.19
--
17.4
F1
0.19
100Vac / 60Hz
0.17
18
17.6
F1
0.17
240Vac / 60Hz
0.07
18
16.8
F1
0.07
254Vac / 60Hz
0.07
--
16.5
F1
0.07
264Vac / 60Hz
0.06
--
16.3
F1
0.06
Model No.: GF-TUB-4F25 90Vac / 50Hz
0.20
--
17.8
F1
0.20
100Vac / 50Hz
0.18
18
18.0
F1
0.18
240Vac / 50Hz
0.08
18
18.4
F1
0.08
254Vac / 50Hz
0.08
--
18.3
F1
0.08
TRF No. IEC62031A
Condition/status
Page 21 of 23 Report No.PSE100-0336 264Vac / 50Hz
0.07
--
18.3
F1
0.07
90Vac / 60Hz
0.20
--
17.7
F1
0.20
100Vac / 60Hz
0.18
18
17.9
F1
0.18
240Vac / 60Hz
0.08
18
18.4
F1
0.08
254Vac / 60Hz
0.08
--
18.3
F1
0.08
264Vac / 60Hz
0.08
--
18.2
F1
0.08
Model No.: GF-TUB-2F12 90Vac / 50Hz
0.08
--
7.3
F1
0.08
100Vac / 50Hz
0.07
9
7.7
F1
0.07
240Vac / 50Hz
0.04
9
8.4
F1
0.04
254Vac / 50Hz
0.04
--
8.4
F1
0.04
264Vac / 50Hz
0.03
--
8.4
F1
0.03
90Vac / 60Hz
0.08
--
7.4
F1
0.08
100Vac / 60Hz
0.07
9
7.7
F1
0.07
240Vac / 60Hz
0.04
9
8.4
F1
0.04
254Vac / 60Hz
0.04
--
8.4
F1
0.04
264Vac / 60Hz
0.03
--
8.4
F1
0.03
Supplementary information: 1) 2)
GF-TUB-2F12 GF-TUB-4Fxx (where xx=24 for 240pcs LED chips, xx=25 for 256pcs LED chips)
P
TABLE: Heating test Tested part and location of sensor:
Temperature rise (K)
Temperature rise (K)
Limit (K)
Result
Model No.: GF-TUB-4F25 Supply voltage (V)
90Vac/60Hz
264Vac/60Hz
--
--
1. Input wire
39.9
32.2
40
P
TRF No. IEC62031A
Page 22 of 23 Report No.PSE100-0336 2. PCB near input
22.2
16.7
--
P
3. Inside enclosure near input
35.1
36.4
--
P
4. RV1 body
35.3
28.1
45
P
5. L2 coil
46.8
33.2
65
P
6. L3 coil
49.4
54.9
65
P
7. L3 core
46.9
51.4
65
P
8. H.S near U1
49.8
53.4
65
P
9. C4 body
36.1
37.8
65
P
10. PCB near BR1
44.4
36.3
65
P
11. PCB near LED
19.8
18.9
65
P
12. H.S near LED
15.7
14.5
65
P
13. inside enclosure near driver
15.4
15.5
--
P
14. Surface of enclosure near driver
8.0
7.2
55
P
15. output wire
33.3
34.2
40
P
16. Ambient air (°C)
27.3
27.0
--
--
Supply voltage (V)
90Vac/60Hz
264Vac/60Hz
--
--
1. Input wire
13.9
18.0
40
P
2. PCB near input
9.0
11.1
--
P
3. Inside enclosure near input
16.9
24.9
--
P
4. RV1 body
15.5
20.4
45
P
5. L2 coil
20.5
24.5
65
P
6. L3 coil
23.9
39.4
65
P
7. L3 core
21.5
34.2
65
P
8. H.S near U1
25.1
39.8
65
P
9. C4 body
19.6
24.7
65
P
10. PCB near BR1
22.6
34.0
65
P
11. PCB near LED
19.2
22.8
65
P
12. H.S near LED
18.4
21.2
65
P
13. inside enclosure near driver
14.4
20.4
--
P
14. Surface of enclosure near driver
9.9
12.2
55
P
15. output wire
20.6
28.8
40
P
16. Ambient air (°C)
25.7
25.8
--
--
Model No.: GF-TUB-2F12
”*” Components are tested as part of the appliance.
18.4
TABLE: Needle-flame
TRF No. IEC62031A
P
Page 23 of 23 Report No.PSE100-0336 Componet/pattern
Test time (sec)
Extinguish Time (sec)
Observation
Input connector and enclosure
10
700Kg/m3
--
--
--
B19
ASIAQTECH
Antenna Coaxial
CTP-TW
--
--
--
Page 6 of 6
TD-5050105
Usser’ss Insstru uctio on and Ph hoto os
PS SE100-033 36
PSE100-0336
PSE100-0336
PSE100-0336
PSE100-0336
PSE100-0336
PSE100-0336
PSE100-0336
PSE100-0336
Desig gn an nd Tech T hniccal Cons C structio on
PS SE100-033 36