Tools Equipment

TOOLS & EQUIPMENT 59

3874TPR

99

SKU 387631 6786

Ball Joint Master Service Kit SKU 387672 6559

899

99

6559 Shown

• The 6559 Ball Joint Master Service Kit Offers Complete Coverage of Car and Truck/Van/SUV Applications • With 70+ Adapters, C-Frame and Application Guide Means There Is Nothing Else to add for Servicing Ball Joints

Car Ball Joint Master Service Kit SKU 291455 6529

52999

• This 50+ Adapter Kit is the Most Complete Car Ball Joint Service Kit Available, and the First of It’s Kind on the Market

Oil Filter Cartridge Set 24mm – Cadillac, BMW 27mm – Cadillac, Mercedes, Buick, Saturn, Saab, Smart, VW 29mm – Dodge 32mm – Saturn, Saab, Various GM 35/36mm – Ford, Mini Cooper, Mercedes, BMW, VW/Audi, Mack Truck. 38mm – small diesel engine applications.

OTC Drain Plug Pro™

1999

599

99

SKU 112476 5911

• This 55+ Adapter Kit is the Most Complete Truck/Van/SUV Ball Joint Service Kit Available

Ford Spark Plug Socket SKU 110450 6900

1999

OTC Drain Plug Pro™ Remove Oil Drain Plug without Dropping or Touching the Plug or Hot Oil

• This Unique Design works on 2004–Newer Ford Vehicles with 5.4L, 4.6L, V8, 6.8L, V10, 3-Valve Engines • Socket End is 9/16”. Soft Rubber Insert Holds and Protects Spark Plug During Removal and Installation • Socket has a 3/8” Drive for use With a Ratchet or Breaker Bar

Belt Holding Tool SKU 112478 7424

14

Alternator Pulley Service Kit SKU 387716 6617

4499

SKU 387646 7500

4999

• 2:1 Reduction Gearbox Standard. Allows for a 2:1 Torque Compression Increase when Compressing Struts • The Arms Adjust in and out, Up and Down, to Accept Many Sizes of Springs. (2-1/2” to 10” Diameter) (2-1/2” to 24” Vertical Stroke) • Lock Rings to Hold Arms in Position - Standard Eliminating Arms from Spreading or Sliding When Compressing Offset or Unique Strut Configurations • Four-Point Locking Jaws Securely Hold the Spring in Place

SKU 110446 6592

OTC Brake Service Brake Pad Gauge SKU 112479 6596

SKU 112537 6591

Inner Tie Rod Wrenches (Standard & HD) • Universal Wrench will Fit on all Styles and Allow the Technician to Un-Screw the Tie Rod Link for Replacement • 7484 – Unique Lever Design will Turn Hex Rack Ends or Hex Shafts From 1” to 1-5/8” (25-41mm) • 7500 – Unique Cam Design Cover Sizes from 1-1/4” to 1-5/8” (33-41mm) Hex, 2 Flats, Round or any Style Rack Ends • 7501 – Unique Cam Design Cover Sizes from 1-1/2” to 1-7/8” (38-48mm) Hex, 2 Flats, Round or Any Style Rack Ends

6592

89999

749

99

StrutTamer Extreme. Includes StrutTamer Spring Compressor, No. 6587 Gear Box, No. 6583 Bridge Accessory

3-Ton Stinger Jack Pack

27995

SKU 291472 6980

9999

• Handles Large Components Such as Brake Drums, Rotors, Drive Wheels, Gears, Flywheels, & Pulleys • One Person Can Easily Set the Tool in Place and Use for Tough Pulls Even Where There is Little Access to Insert the Jaws • Spread to 12-3/4” and 5” of Reach • 7-Tons of Force, Yet Weighs Less Than 10 Pounds • Can be Used with Air Tools

Hub Grappler™ SKU 291457 6575

1,500 Lb Capacity Easy Roller™ SKU 387645 1580

14999

(Sold Individually) • Provides Simple and Efficient Method of Moving a Disabled Vehicle Around a Shop Environment • Fits Tread Widths Up To 12” • 4 Heavy-Duty Phenolic Casters • 1,500 Lb Capacity Per Unit • Hydraulic Lift Mechanism With Locking Pin

54999

Complete Solution For Servicing Wheel Hubs and Bearings on the Vehicle Without Removing the Steering Components or Knuckle, Eliminating Unnecessary Alignments or the Use of a Shop Press. • Jaws Designed and Sized to Properly Fit Hub Applications and is Quickly Located on The Puller Bar Without the Use of Fasteners • 3/4’’ Custom Drive Screw Coupled with the Special Equalizer Washer Provides Smooth Operation While Proprietary Heat Treating Extends its Life 5-10 Longer Than Similar Designs • Six Adapters Increase Application Coverage. Includes Tie Rod/Ball Joint Tool and Two Ford Axle Installers • Included Application Guide is the Most Comprehensive on the Market

3-Piece Indexing Pry Bar Set

7999

• Stop Messy Fluid Leaks and Prevent Contamination During Service • Kit Seals all Types of Rubber and Steel Line Found on Fuel, Brakes, AC, Power Steering and Transmission System • Includes Two Banjo Style Fitting Stoppers, Two Steel Line Stoppers, Six Line Plugs, a Line Disconnect Tool, and a Long Reach Line Pinch-Off Tool For Hard-To-Reach Hoses

Brake Drum and Rotor Puller

• Jack Pack Provides a 3-Ton Service Jack (5303) • The Stands Have a Base of: 8-1/4” x 7-1/2” Height Range: 12” to 17-11/16”

Line Fluid Stopper Kit SKU 387721 6703

2099

• The 6596 Brake Pad Gauge Allows for a Definitive Measurement of Brake Pads to Determine Remaining Life • Unique Design Allows for Measurement on The Vehicle without the Removal of Any Components in Most Cases (Wheel Assembly or Brake Caliper) • Quick Reference of Brake Pad Condition Via Color Code Scale

8999

5999

• Overrunning Alternator Pulley and Overrunning Alternator Decoupler Pulley are Designed to Extend Belt Life and Belt Tensioner Life • These Tools Hold the Alternator Shaft Still so the Pulley Can be Removed or Installed • Kit Includes: Decoupler Tool Assembly, 17mm Hex Drive, 17mm Allen Wrench 110mm Socket Extension, 28mm / 21mm Hex Cap Nut Driver, 28mm / 18mm Hex Cap Nut Driver, 22mm Hex Cap Nut Driver

Hablamos Español

StrutTamer™ Extreme Spring Compressor

SKU 452335 5300

SKU 452336 7484

SKU 387647 7501

99

• Keeps Belt From Falling off of a Pulley During Belt Installation • Universal Design to Fit Most Pulley Styles & Sizes • Super Strong Magnet to Hold the Belt Firmly on the Pulley • Multiple Holders Can Be Used for Belt Applications That Fit Around Many Pulleys • Durable Plastic Housing with Magnet for Steel/Iron Pulley Applications

(1-877-298-6651)

StrutTamer Extreme. Includes StrutTamer Spring Compressor, No. 6587 Gear Box, No. 6583 Bridge Accessory, and No. 6582 Mobile Stand

Truck/Van/SUV Ball Joint Master Service Kit SKU 291456 6539

1-877-AZTool1

Aluminum Racing Jack Pack SKU 948059 1533

34999

SKU 387687 7175

6999

• Sizes 10”, 12” and 15” • Indexable to 180° for Better Access • 14 Locking Positions for Leverage in Multiple Applications • Knurled Handle Assures a Sure Grip • Meets or Exceeds ANSI Specifications for Pry Bars

• Jack Lifts Two Tons and Weighs Only 43 Lbs • Low Profile 3-1/2" Makes it Perfect for Ground Hugging, High Performance Cars • 10-1/4" Min. Height, 15-1/4" Max. Height • Removable, Rubber Saddle Pad Protects Vehicle and Prevents Slipping

Hub Clamp Expander Kit SKU 387703 6578

8999

• For Servicing Struts, Ball Joints, or Steering Knuckles with Pinch Bolt Mounts • Remove Most Stubborn Struts and Ball Joints with Ease • This Separator Mounts in The Pinch Bolt Holes and Drives the Anvil into the Pinch Slot, Expanding the Mount for Easy Component Removal • Use on Aluminum or Cast Iron Pinch Mounts; Includes 2 Dowel Sizes

Crank & Cam Seal Service Kit SKU 387717 7196

149

99

• Removes and Installs Camshaft and Crankshaft Seals on Cars and Truck/Van/SUV’s without Damage • Includes a Puller Coupled with Specialized Puller Legs that Hook the Seal for Quick & Easy Removal • The Interchangeable Seal Install Adapters are Designed for Use with the Cam or Crank Bolt. Kit Services Seal Sizes of 21.5mm to 64mm

Windshield Wiper Puller SKU 112554 4676

10

99

• Removes Wiper Arms on Many Foreign and Domestic Cars and Light Trucks • Will Not Damage Wiper Arm or Hood Cowling During Removal • Simply Place Puller Feet Under Wiper Arm and Tighten Forcing Screw Against Wiper Shaft

Please do not return purchases to the store. For information regarding warranty, repair and any questions or concerns, please call 1-877-AZTOOL1.

AZG0114-Book 4 docs.indb 31

Professional Socket Set, 52-Piece SKU 112536 5900A

10999

• Specially Selected to Cover Hundreds of Applications From Bumper to Bumper on Cars and Trucks • TORX® Bit Sockets, TORX® PLUS Bit Sockets, TamperResistant TORX® Bit Sockets, and External TORX® Sockets • Made from Superior S2 Steel to Meet or Exceed Torque Specifications

Prices Subject To Change Without Notice.

31 11/22/13 8:29 AM