Tractor Parts - Ford - Rick's Ag Parts

replacement parts for

Ford A-SBA330300380 A-SBA330300390

3.02 lbs. 3.01 lbs.

Spindle (RH) Spindle (LH)

A-SBA330302450 A-SBA330302420

4.8 lbs. 4.78 lbs.


Dim./Info: A- 5.40" B- .904" C- .983" D- 1.180" E- .984"

Dim./Info: A- 7.060' B- .983" C- .984" D- .787"

For Models: 1200 1/79> 2WD, (1110, 1210 ALL 1983-8/86 2WD) For Models: (1120, 1220 ALL W/ FIXED AXLE 11/89> 2WD)

6.46 lbs. 6.48 lbs.


A-SBA330301950

6.86 lbs.

Spindle (RH)

Replaces: SBA330301940

Dim./Info: A- 8.875" B- 1.180" C- 1.376" D- 1.181" E- .938"

A-SBA330301920

6.88 lbs.

Spindle (LH)


Dim./Info: A- 8.062" B- 45 TOOTH SPLINE C- 1.180" D- .983"

For Models: (1300, 1500 ALL 1/79> 2WD), (1310, 1510 ALL 1/83> 2WD)

A-SBA330301700 A-SBA330301650

3.7 lbs. 3.74 lbs.


Dim./Info: A- 5.400" B- .983" C- 1.180" D- .787"

For Models: (1320, 1520, 1620 ALL 1/87> 2WD), 1715 1/93> 2WD, (1530, 1630, 1725 ALL 10/96> 2WD), (TC25, TC29, TC33 ALL 9/98> 2WD), TC30 2WD

A-SBA330302010 A-SBA330301980

11.4 lbs. 11.36 lbs.


Dim./Info: A- 9.50" B- 22 TOOTH SPLINE C- 1.574" D- 1.37" E- .983"

For Models: 1110 SN UB02393> 9/86> 2WD, 1210 SN UC09506> 9/86> 2WD

A-SBA330302541 A-SBA330302531

4.06 lbs. 4 lbs.


Dim./Info: A- 6.940" B- .983" C- .984" D- .787

For Models: (1720, 1920 ALL 1/87> 2WD)

A-SBA330310790 A-SBA330310780

11.64 lbs. 11.68 lbs.


Dim./Info: A- 10.812" B- 45 SPLINES C- 1.375" D- 1.377" E- .983"

front axle / steering parts

A&I parts are not original parts, and are not sponsored affiliated or otherwise connected with .

A-SBA330310770 A-SBA330310760

For Models: (1120, 1220 ALL W/ FIXED & ADJUSTABLE AXLE 1/87> 2WD), 1215 W/ FIXED AXLE 1/87> 2WD, TC18 W/ FIXED AXLE 7/98> 2WD For Models: 2110 NH-NE W/ 60" AXLE 2WD, 1910 W/ 60" AXLE 2WD, (1700, 1900 ALL 1/79> 2WD), 1710 1/83> 2WD

A&I PRODUCTS

fax: 1-800-511-0516

e-mail: [email protected]

1-800-657-4343

1


Ford A-SBA330310850 A-SBA330310840


13.14 lbs. 13.12 lbs.

LH Spindle

8.6 lbs.

12.22 lbs. 12.14 lbs.

Dim./Info: A- 9.50" B- 22 TOOTH SPLINE C- 1.574" D- 1.574" E- 1.180"

A-2N3109 A-C0NN3123B A-WBKFD1

Upper & Lower Bushing Thrust bearing WHEEL BEARING KIT

For Models: (2N, 9N ALL 1939-47)

A-8N3105B

RH Spindle

Spindle (RH)

10 lbs.

Replaces: F3NN3105AA

Spindles are heat treated.

A-8N3106B

LH Spindle

9.85 lbs.

Dim./Info: A - 10.750" B - 1.250" C - 1.187" D - .750"

For Models: (2120, 3415, TC35, TC40, TC45 ALL 2WD)

A-SBA330302580

0.12 lbs. 0.3 lbs. 1.21 lbs.

12.22 lbs.


A-SBA330302570

Spindle (LH)

12.14 lbs.



SPINDLE R/H

Upper & Lower Bushing Thrust bearing WHEEL BEARING KIT Front Wheel Hub

A-957E3105

SPINDLE, RH

SPINDLE L/H

13.69 lbs.

Replaces: 957E3105, NCA3105B


A-957E3106

SPINDLE, LH

11.7 lbs.

Dim./Info: 7.750" 1.500" 1.750" 1.180"

For Models: FMD, FORDSON SUPER MAJOR, MAJOR, POWER MAJOR, SUPER MAJOR

13.05 lbs.

Dim./Info: A - 10.687" B - 1.250" C - 1.340" D - 1.250" E - .750"

12 lbs.

Replaces: E1ADKN3107, 81821185, DKN3107

NEW! A-E1ADKN3106

0.12 lbs. 0.3 lbs. 1.21 lbs. 11.98 lbs.

For Models: 8N 1948-52, NAA 1953-54

For Models: (TC35, TC40, TC45, 2120, 3415 ALL 2WD)

NEW! A-E1ADKN3105

A-2N3109 A-C0NN3123B A-WBKFD1 A-86511582

A-2N3109 A-NCA3110A A-C0NN3123B A-WBKFD2 A-WBKFD3 A-C9NN1104F

Bushing Bushing Thrust bearing WHEEL BEARING KIT WHEEL BEARING KIT Front wheel hub w/ stud bolts

0.12 lbs. 0.12 lbs. 0.3 lbs. 1.01 lbs. 0.75 lbs. 14.5 lbs.

For Models: (2000, 4000, 600, 700, 800, 900 ALL 1955-64 W/ ALL PURPOSE STD. FRONT AXLE/ USA BUILT), NAA 1955> W/ ALL PURPOSE STD. FRONT AXLE/ USA BUILT

2

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



10.15 lbs.

Dim./Info: A - 11.000" B - 1.250" C - 1.187" D - .750"

For Models: 2110 NH-NA 2WD W/ 72" AXLE 1/1983> Spindle (RH) Spindle (LH)

RH Spindle


A-2N3106


A-SBA330302070 A-SBA330302040

A-2N3105


Ford A-C5NN3105U

9.25 lbs.

RH Spindle

Replaces: F2NN3105AA

RH Spindle

9.65 lbs.

LH Spindle

14.07 lbs.



A-C5NN3106R

A-E0NN3105AA A-E0NN3106AA

9.25 lbs.

LH Spindle

Dim./Info: A - 11.750" B - 1.246" C - 1.464" D - 1.375" E - .750"

A-2N3109 A-NCA3110A A-C0NN3123B A-WBKFD4 A-C9NN1104F

Bushing Bushing Thrust bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts

0.12 lbs. 0.12 lbs. 0.3 lbs. 0.73 lbs. 14.5 lbs.

For Models: 2000-3000 65-75 VINEYARD, (2600, 2610, 3600, 3610, 3900 ALL 76-81 WITHOUT CAB)

A-F2NN3105CA A-F2NN3106CA

A-2N3109 A-C5NN3110B A-C5NN3A299A A-WBKFD5 A-C9NN1104E

Upper Bushing Lower Bushing Thrust bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts

For Models: 2310, 2610, 2910, 3610, 3910, 4110, 4610SU

A-C5NN3105V A-C5NN3106S

Dim./Info: A - 11.687" B - 1.246" C - 1.340" D - 1.187" E - .750"

Dim./Info: A - 7.687" B - 1.246" C - 1.339" D - 1.250" E - .750"




For Models: (2000, 231, 4000, 531 ALL ORCHARD)

A-D4NN3105B A-D4NN3106B

11.25 lbs. 9.75 lbs.

RH Spindle LH Spindle

A-NCA3110A A-C0NN3123B A-WBKFD4 A-C9NN1104F

Upper & Lower Bushing Thrust bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts




For Models: (2300, 2600, 3300, 3600, 3910, 4110, 4610 ALL VINEYARD MODEL ONLY)

A-E9NN3106AA

LH Spindle

12.66 lbs.

RH Spindle

12.8 lbs.

Replaces: 82859846

A-E9NN3105AA

Dim./Info: A - 12.000" B - 1.340" C - 1.250" D - .750"

14.14 lbs. 14.06 lbs.


12.42 lbs. 12.46 lbs.



Dim./Info: A - 12.312" B - 1.464" C - 1.375" D - .750"

0.12 lbs. 0.3 lbs. 0.73 lbs. 14.5 lbs.

For Models: (2600, 3600, 3900 ALL 76-81 W/ CAB)

A-C5NN3110B A-C5NN3A299A A-WBKFD5 A-C9NN1104E

Bushing Thrust bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts



Dim./Info: A - 11.687" B - 1.250" C - 1.340" D - 1.250" E - .750"

0.14 lbs. 0.27 lbs. 0.97 lbs. 14.36 lbs.

For Models: (3230, 3430, 3930, 4130, 4630, 4830, 5030 ALL HIGH CLEARANCE)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

3


Ford A-E9NN3105BA A-E9NN3106BA

13.98 lbs. 13.82 lbs.


Dim./Info: A - 8.625" B - 1.464" C - 1.375" D - .750"


0.14 lbs. 0.27 lbs. 0.97 lbs. 14.36 lbs.

Spindle (LH)

20.66 lbs.

For Models: (3000, 335, 3400 ALL W/ Manual Or Power Steering), 4000 1965> W/ Power Steering, (4410, 532 ALL W/ Power Steering)

A-C5NN3105M

RH Spindle

15.9 lbs.

LH Spindle

16.05 lbs.


A-C5NN3106J

Dim./Info: A - 10.625" B - 1.498" C - 1.748" D - 1.625" E - .843"

11.45 lbs. 9.6 lbs.


Dim./Info: A - 12.125" B - 1.244" C - 1.465" D - 1.375" E - .750"

A-2N3109 A-C5NN3110B A-C5NN3A299A A-WBKFD5 A-C9NN1104E

20.66 lbs.

Dim./Info: A- 9.812" B- 1.794" C- 1.124"

For Models: (3230, 3430, 3930, 4130, 4630, 4830, 5030 ALL LOW CLEARANCE), 4610 NARROW/NARROW ORCHARD MODELS ONLY - LOW CLEARANCE, 4600 ORCHARD MODEL ONLY - LOW CLEARANCE

A-C5NN3105T A-C5NN3106N

Spindle (RH)

Upper Bushing Lower Bushing Thrust bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts

A-C5NN3109A A-C5NN3110A A-C0NN3A299A A-WBKFD6 A-C9NN1104D


Upper bushing Lower bushing Thrust Bearing WHEEL BEARING KIT Front wheel hub w/ stud bolts

For Models: (5000, 7000 ALL 65-75 NOT FOR USE W/10.00X16 TIRES), (7600, 7610, 7700 ALL 76), (5600, 6600 ALL 76-81), (5610, 6610 ALL 81)

A-D2NN3105C

RH Spindle

18.1 lbs.

*LH Spindle

17.75 lbs.


A-D2NN3106C

Dim./Info: A - 10.687" B - 1.498" C - 1.748" D - 1.797" E - 1.125"

For Models: 4000 W/ ALL PURPOSE FRONT AXLE 1965>

A-D4NN3105A

RH Spindle

10.4 lbs.

LH Spindle

12 lbs.


A-D4NN3106A

Dim./Info: A - 12.250" B - 1.464" C - 1.375" D - .750"


A-C5NN3110A A-C5NN3109A A-WBKFD7 A-C0NN3A299A A-313020

Lower bushing Upper bushing WHEEL BEARING KIT Thrust Bearing Front Wheel Hub


For Models: (5000, 5100, 5600, 6600, 7000, 7100, 7600 ALL 63-75 FOR USE W/ 10:00X16 TIRES.) A-C5NN3110B A-C5NN3A299A A-WBKFD5 A-C9NN1104E


0.14 lbs. 0.27 lbs. 0.97 lbs. 14.36 lbs.

For Models: 4600 1/1975>, 4610 1/1981 - 2/1990

4

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-C5NN3110B A-C5NN3A299A A-WBKFD5 A-C9NN1104E

NEW! A-C5NN3105F NEW! A-C5NN3106E


Ford A-D5NN3105F

22.5 lbs.

RH Spindle


A-D5NN3106F

A-C7NN3105D

RH Spindle

19.16 lbs.

LH Spindle

12.98 lbs.


22.5 lbs.

LH Spindle

A-C7NN3106B

Dim./Info: A - 12.875" B - 1.722" C - 1.934" D - 1.625" E - .842"

A-C0NN3A299A A-D5NN3109B A-C0NN3110A A-WBKFD6 A-C9NN1104D

Thrust Bearing Upper bushing Lower bushing WHEEL BEARING KIT Front wheel hub w/ stud bolts

Dim./Info: A - 8.000" B - 1.498" C - 1.638" D - 1.748" E - 1.625" F - .842" 0.42 lbs. 0.44 lbs. 0.22 lbs. 1.28 lbs. 13.42 lbs.

A-D5NN3105E Spindles are heat treated.

A-D5NN3106E

30.38 lbs.

LH Spindle

A-D6NN3105A

RH Spindle

24 lbs.

LH Spindle

28 lbs.


A-D6NN3106A

Dim./Info: A - 16.875" B - 1.722" C - 1.934" D - 1.794" E - 1.125"

A-C0NN3A299A A-D5NN3109B A-C0NN3110A A-WBKFD7 A-313020

Thrust Bearing Upper bushing Lower bushing WHEEL BEARING KIT Front Wheel Hub

Dim./Info: A - 16.000" B - 1.498" C - 1.638" D - 1.748" E - 1.625" F - .842" 0.42 lbs. 0.44 lbs. 0.22 lbs. 2.19 lbs. 12.56 lbs.

For Models: 5700, 6700, 7700

A-D5NN3105D

RH Spindle

25.5 lbs.

LH Spindle

2.5 lbs.


A-D5NN3106D

A-C0NN3A299A A-C5NN3109A A-C5NN3110A A-WBKFD6 A-C9NN1104D


A-E9NN3105EB




For Models: 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7600, 7610, (5100, 7100 ALL FOR LH SPINDELS ONLY) RH/LH Spindle

20.82 lbs.

Dim./Info: A - 12.000" B - 1.680" C - 1.934" D - 1.625" E - .843"

Dim./Info: A - 16.775" B - 1.722" C - 1.934" D - 1.625" E - .842"



For Models: (5100, 6610 ALL SHORT SPINDLES)

25.5 lbs.

RH Spindle







For Models: (5700, 6700, 6710, 7700, 7710 ALL LOW CLEARANCE)

A-C0NN3A299A A-C5NN3109A A-C5NN3110A A-WBKFD6 A-C9NN1104D

For Models: 5640, 6640, 7740, 7840

For Models: (5700, 6700, 6710, 7700, 7710 ALL HIGH CLEARANCE)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

5


Ford A-D6NN3105A NEW! A-D2NN3106B

Spindle (RH)

24 lbs.

Spindle (LH)

0 lbs.

Dim./Info: A - 16.000" B - 1.498" C - 1.638" D - 1.748" E - 1.625" F - .842" A-C0NN3A299A

Thrust Bearing

0.42 lbs.

For Models: (6600C, 7600C ALL USED W/ 10.00 X 16 FRONT TIRES), (5200, 7200 ALL USED W/ 7.50 X 18 X 16 FRONT TIRES)

A-E9NN3105DB

RH/LH Spindle

24.82 lbs.

Dim./Info: A - 13.875" B - 1.722" C - 1.934" D - 1.794" E - 1.124" A-C0NN3A299A A-D5NN3109B A-C0NN3110A A-WBKFD7 A-313020



For Models: 8240, 8340 RH/LH Spindle

19.06 lbs.

Dim./Info: A - 9.500" B - 1.722" C - 1.934" D - 1.625" E - .843"




Dim./Info: A - 16.775" 36 SPLINES B - 1.638" C - 1.722" D - 1.934" E - 1.794" F - 1.125" A-C0NN3A299A A-C5NN3109A A-C0NN3110A A-WBKFD7 A-313020


RH/LH Spindle

A-C0NN3A299A A-D5NN3109B A-C0NN3110A A-WBKFD7 A-313020



NEW! A-5166109 NEW! A-5166111

Spindle (RH) Low Profile

13.96 lbs.

Spindle (LH) Low Profile

14.08 lbs.

Dim./Info: 8.625" 1.495" 1.624" .999" 0.42 lbs. 0.58 lbs. 0.22 lbs. 2.19 lbs. 12.56 lbs.

For Models: 8000, 9000

A-D9NN3105AA

26 lbs. 26 lbs.

For Models: TW10, TW15, TW20, TW25, TW35, TW5, 8700, 9700

29.62 lbs. 26 lbs.



Dim./Info: A - 16.775" B - 1.722" C - 1.934" D - 1.794" E - 1.125"

For Models: (6640, 7740 ALL ORCHARDS)

A-C9NN3105C A-C9NN3106B

A-D5NN3105C A-D5NN3106C

35 lbs.

Dim./Info: A - 14.750" B - 1.999" C - 2.000" D - 1.500" 42 SPLINES

For Models: TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, 3430, 3930, 4130, 4630, 4830, 5030

A-SBA398511760

Spindle Bushing Used W/ SBA330302420 & SBA330302450 Spindles.

0.1 lbs.

Dim./Info: 1.340" O.D. 1.183" I.D. 1.260" Long For Models: 1120, 1220

A-C0NN3A299A A-D8NN3110AB A-WBKFD8

Thrust Bearing Upper & lower bushing WHEEL BEARING KIT

0.42 lbs. 0.7 lbs. 3.04 lbs.

For Models: TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700

6

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-E9NN3105CB


Ford A-SBA398510130

Spindle Bushing Used W/ SBA330300040, SBA330300030, SBA330310780 & SBA330310790 Spindles.

0.22 lbs.

A-SBA398510280

0.2 lbs.

Spindle Bushing Used W/ SBA330310760, SBA330301920, SBA330301950, SBA330301910 & SBA330301940 Spindles.

Dim./Info: 1.540" O.D. 1.380" I.D. 1.570" Long

For Models: 2000 55-64 USA BUILT, ORCHARD, 2000-3000 65-75 VINEYARD, 2300, 2310, 2600 76-81 WITHOUT CAB, VINYARD, 2610 76-81 WITHOUT CAB, 2910, 2N 39-47, 3300, 3600 76-81 WITHOUT CAB, VINYARD, (3610, 3900 ALL 76-81 WITHOUT CAB), 3910, 4000 55-64 USA BUILT, 65-75 EXCVINYARD, 4100 76-81 Without Cab, 4110, 4410SU, (4610, 4610SU ALL 1981->), (600, 700, 800 ALL 55-64 USA BUILT), 8N 48-52, 900 55-64 USA BUILT, 9N, NAA 5354

A-C5NN3110B

For Models: (1300, 1310, 1500, 1510 ALL LOWER BUSHING), (TC25, TC29, TC30, 1320, 1520, 1530, 1620, 1630, 1715, 1725 ALL UPPER & LOWER BUSHING)

A-SBA398510290

Spindle Bushing 0.18 lbs. Used W/ SBA330301980, SBA330302010, SBA330310840, SBA330310850, SBA330302040, SBA330302070, SBA330302570 & SBA330302580 Spindles.


Spindle Bushing Dim./Info: 1.500" I.D. 1.600" O.D. 1.500" Long

0.14 lbs.

For Models: 2310, 2610, 2910, 3610, 3910, 3930, 4000 65-75 EXC VINYARD, 4100, 4110, 4130AP, 4130N, 4410SU, 4600, 4610, 4610N, 4610SU 1981->, 4630

A-NCA3110A

Spindle Bushing

0.12 lbs.

For Models: 2300, 3300, (231, 531 ALL ORCHARD), (600, 700, 800, 900 ALL 55-64 USA BUILT), (2000, 4000 ALL 55-64 USA BUILT, ORCHARD), 2000-3000 65-75 VINEYARD, 3900 76-81, (2610, 3610 ALL 76-81 WITHOUT CAT), (2600, 3600 ALL 76-81, VINYARD)

For Models: (TC35, TC40, TC45, 1720, 1920, 2110, 2120, 3415 ALL UPPER & LOWER SPINDLE BUSHING)

A-957E1195

Washer, Front Spindle

0.02 lbs.

0.01 lbs.

Dim./Info: 1.104" O.D. .986" I.D. .780" Long

For Models: DEXTA, SUPER DEXTA, 2000, 2600, 2610, 3000, 3600, 3610, 3910, 4000, 4110, 4600, 4610

For Models: (TC18, 1120, 1215, 1220 ALL PIVOT PIN BUSHING), (1110, 1200, 1210 ALL UPPER & LOWER SPINDLE BUSHING AND PIVOT PIN BUSHING)

A-SBA398510080

Bushing Used W/ SBA330310760 & SBA330310770 Spindles.

A-D8NN3115BA

0.1 lbs.

Dim./Info: 1.341" O.D. 1.183" I.D. .970" Long

Spindle Pin Dim./Info: 1.13" DIAMETER

2 lbs.

For Models: 1801, 340A, 340B, 3500, 3550, 4040, 4140, 4400, 445, 445A, 450, 4500, 515, 535, 540A, 540B, 545, 545A, 555, 555A, 555B, (5610, 6410, 6610, 6810, 7610 ALL W/ HEAVY DUTY AXLE)



0.12 lbs.

Dim./Info: 1.250" I.D. 1.370" O.D. 1.500" Long

For Models: 1600, 1700, 1710, 1900, 1910, 2110

Bushing Used W/ SBA330300390, SBA330300380, SBA330300390, SBA330301650, SBA330300380 & SBA330301700 Spindles.

Spindle Bushing

Replaces: 957E3109B


A-SBA398510170

A-2N3109

A-SBBSKIT04

SPINDLE BUSH/BRG/SEAL KIT 0 lbs. (2)2N3109 Bushings, (2)C5NN3110B Bushings, (2)C5NN3A299A Thrust Brgs., (2)C5NN3125A Spdl. Dust Seals

For Models: (1300, 1310, 1500, 1510 ALL LOWER SPINDLE BUSHING & PIVOT PIN BUSHING), (TC25, TC29, TC30, TC33, 1320, 1520, 1530, 1600, 1620, 1630, 1715, 1725 ALL PIVOT PIN BUSHING)

Dim./Info: 2N3109 (1 1/4" X 1 3/8" X 1 1/2") C5NN3110B (1 1/2" X 1 5/8" X 1 1/2") C5NN3A299A (1 1/2" ID X 2 1/4" OD) C5NN3125A (1 1/8" X 1 5/8" X 1/4") For Models: 4000, (2310, 2610, 2810, 2910, 3610, 3910 ALL W/O CAB)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

7


Ford A-SBBSKIT05 SPINDLE BUSH/BRG/SEAL KIT 2.83 lbs. (2)C5NN3109A Bushings, (2)C5NN3110A Bushings, (2)C0NN3A299A Thrust Brgs., (2)C0NN3A208A Dust Seals Dim./Info: C5NN3109A (1 5/8" X 2" X 1 7/8") C5NN3110A (1 3/4" X 2" X 1 7/8") C0NN3A299A (2" ID X 2 7/8" OD) C0NN3A208A (1 1/2" X 2" X 1/4")

A-9N3270

Drag link end

0.76 lbs.

Dim./Info: A - 3.187" B - .687" 18 RH thread For Models: (2N, 9N ALL 39-47 USED ON FRONT OF DRAG LINK)

A-8N3314D

Tie Rod Tube

2.74 lbs.

Drag link end

0.82 lbs.

For Models: 5000, 5100, 5110, 5200, 5600, 5610, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610

A-SBBSKIT06

Dim./Info: C5NN3110B (1 1/2" X 1 5/8" X 1 1/2") C5NN3A299A (1 1/2" ID X 2 1/4" OD) D4NN3125A (1 1/2" X 1 7/8" X 1/4")

Dim./Info: A - 32.750" B - .875" For Models: 8N

A-8N3270

Dim./Info: A - 3.375" B - .687" 18 LH thread

For Models: 3230, 3430, 3930, 4130, 4600, 4610, 4630, 4830, 5030

A-SBBSKIT03

SPINDLE BUSH/BRG/SEAL KIT 1.1 lbs. (2)C0NN3123B THRUST BRGS.,(2)2N3109 BUSHINGS, (2)NCA3110A BUSHINGS & (2)C5NN3125A SPINDLE DUST SEALS

Dim./Info: 2N3109 (1 1/4" X 1 3/8" X 1 1/2") C5NN3125A (1 1/8" X 1 5/8" X 1/4") C0NN3123B (1 3/8" X 2 1/4" X 5/8") NCA3110A (1 11/32" X 1 3/8" X 1 1/2") For Models: (2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910 ALL WITHOUT CAB)

A-C5NN3125A

Steering Arm Dust Seal

0.01 lbs.

For Models: 8N 48-54 USED ON FRONT OF DRAG LINK

A-NAA3270A

Drag link end

1.8 lbs.

Dim./Info: A - 3.875" B - .687" 18 LH thread For Models: (NAA, 600, 800 ALL 53-63 USED ON FRONT OF DRAG LINK)

A-NAA33271A

Rear drag link end

1.22 lbs.

Dim./Info: A - 4.250" B - .687" 18 RH thread For Models: (2N, 8N, 9N ALL USED ON REAR OF DRAG LINK), (NAA, 600, 800 ALL 53-61 USED ON REAR OF DRAG LINK) For Models: NAA, 2000, 3000, 4000, 600, 8N, 800, 900

A-C0NN3A208A

Steering Arm Dust Seal

A-E1ADDN3304B

9 lbs.

Drag Link Assembly

Dim./Info: A- 45.25" B- 1.187"

0.02 lbs.

For Models: MAJOR, SUPER MAJOR

A-309523

Drag link end (front)

For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610

A-D4NN3125A

Dim./Info: A - 3.250" B - 3/4-16 LH THRD

0.1 lbs.

Dust Seal

1.1 lbs.

For Models: (600, 800 ALL SN), (2000, 4000 ALL 4 CYL SN78836>)

A-D8NN3A540BJM

2.76 lbs.

A-957E3287

0.07 lbs.

Clamp

For Models: (2000, 3000 ALL 65/)

A-C5NN3308E

For Models: (535, 545 ALL All For HD Tractor Loaders Backhoe), 555 Early, For HD Tractor Loaders Backhoe, 4500 Ind. For HD Tractor Loaders Backhoe

A-C5NN3349A

0.54 lbs.

Drag link tube

Dim./Info: 5.000" LONG

A-312874

0.52 lbs.

Drag link tube

Dim./Info: 6.120" LONG For Models: (600, 800 ALL SN78836>)

A-C5NN3A300B

Front drag link end

0.94 lbs.

Dim./Info: A - 3.312" B - .750" 16 LH thread

8.5 lbs.

Dim./Info: 28.125" tube length For Models: (2600, 3600, 4000, 4140, 4600 ALL W/PS), (2000, 3000 ALL 65-75 W/PS), (2610, 3610, 4110 ALL 75/81 LESS CAB W/PS)

A-C5NN3307G

For Models: (600, 800 ALL SN, 4410, 532

For Models: (2000, 2600, 2610, 3000, 3600, 4110 ALL 65 W/PS)

A-312870

0 lbs.

Drag Link End (RH)

Replaces: 310082

NEW! A-C5NN3A300C

DRAG LINK END - FRONT

Dim./Info: A- 4.00" B- 13/16- 18 LH THRD.

Dim./Info: A - 34.25" B - 1.000" For Models: (600, 800 ALL SN 78836>), (2000, 4000 ALL 4 CYL SN 78836>)

A-C5NN3314C

Drag Link Tube, RH

For Models: 3000, 335, 3400, 4000, 4410, 532

2.56 lbs.

Dim./Info: 30.900" long

NEW! A-C7NN3290A

Drag Link Tube, RH

3.18 lbs.

TIE ROD

Dim./Info: A- 4.875" B- 1 1/8 - 12 UNF LH THRD.

For Models: (2300, 3300 ALL FOR LH 65), (2000, 3000 ALL 65)

A-C5NN3314F

1.34 lbs.



Dim./Info: A- 2.375" B- 5/8- 18 RH THRD

2.36 lbs.


For Models: 3000, 3500, 3550, 420, 4500, 535, 5500, 5550, 650, 6500, 750, 7500, 755, 755A, 755B, 4000 1965 >

For Models: (2300, 3300 ALL 65/)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

9


Ford A-D4NN3289D

1.6 lbs.

Tie rod end (female thread)

A-CAR107634

Dim./Info: A - 4.340" B - .750"-16 UNF RH THRD

Dim./Info: A: 4.000" B: M20 X 1.5 LH THREAD For Models: (2600, 2610, 2810, 2910, 3600, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030 ALL ALL PURPOSE W/CAB)

For Models: (2310, 234, 2610, 2810, 2910, 334, 335, 3610, 3910, 4110 ALL W/CAB 1/81-9/84), (233, 2600, 333, 3600 ALL W/CAB 4/76>)

A-957E3290B

0.8 lbs.

Front drag link end

NEW! A-5166077

1.14 lbs.

For Models: 3430, 3930, 3930H, 3930N, 3930NO, 4130, 4130N, 4130NO, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 4830O, 4835, 5030, 5030O, 5635, 6635, 7635, (TL100, TL65, TL70, TL80, TL90 ALL BRAZIL), (TN55, TN55D, TN65, TN65D, TN70, TN70D, TN75, TN75D ALL LOW PROFILE)

A-C7NN3289B

Tie Rod (RH Thread)

Dim./Info: A: 4.812" B: 1.125"-12 RH THREAD

Dim./Info: A - 4.500" B - .687" - 18 RH For Models: (3910, 4110 ALL LESS CAB W/ MANL STRG), (4600SU, 4610SU ALL W/ MANL STRG), SUPER DEXTA 57/64, (2000, 3000 ALL 65/75), (2600, 3600 ALL 75/81 LESS CAB W/ MANL STRG), (2610, 3610 ALL 81/ 9/84 LESS CAB W/ MANL STRG)

A-D4NN3278A

1.9 lbs.

LH outer tie rod

For Models: (3000, 3500, 3550, 4000, 4500 ALL 1/65>), (5500, 5550 ALL 1/67>), (650, 6500 ALL 1/73-12/77), (750, 7500, 755, 755A, 755B ALL 1/73>), 535 1/75-9/78, 420 1/75>

A-81878543

Dim./Info: A- 6.750" B- 1.100" For Models: (3230, 3430, 3930, 4130, 4630, 4830, 5030 ALL 4 WD W/ CAR707 AXLE)

For Models: 2310, (3100, 3910, 4110, 4600, 4610 ALL W/CAB), (2600, 3600 ALL 65/81 W/CAB), (2610, 3610 ALL 81-9/84 W/CAB)

10.5 lbs.

Drag Link

For Models: (2310, 234, 2610, 2810, 2910, 334, 335, 3610, 3910, 4110 ALL W/CAB 1/81-9/84)

1.39 lbs.

Tie Rod

For Models: (3230, 3430, 3930, 4130, 4630, 4830, 5030 ALL 4 WD W/ CAR707 AXLE)

A-E1NN3A300AA

Front drag link end

1.14 lbs.

Dim./Info: A - 8.750" B - .859"

10 lbs.

Drag Link


Dim./Info: A: 36.500" B: 1.100" For Models: (233, 2600, 333, 3600 ALL W/CAB 4/76>)

A-CAR107633

NEW! A-81878537

Dim./Info: A- 6.625" B- M18 X 1.5 LH THRD

Dim./Info: A: 36.500" B: 1.100"

A-D4NN3304A

2.62 lbs.

Tie Rod

Dim./Info: A - 14.000"

A-E1NN3304BA

3.2 lbs.

Replaces: C7NN3289A

A-C5NN3307M

Tie rod end

5.1 lbs.

1.3 lbs.

Tie Rod

Dim./Info: A - 40.125" For Models: 4200

Dim./Info: A: 4.00" B: M20 X 1.5 RH THREAD For Models: (2600, 2610, 2810, 2910, 3600, 3610, 3910, 3930, 4610, 4630, 4830, 5030 ALL ALL PURPOSE W/CAB)

10

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



Dim./Info: A- 29.06" B- .788"

For Models: (3910, 4110 ALL LESS CAB W/ MANL STRG), (4600SU, 4610SU ALL W/ MANL STRG), SUPER DEXTA 57/64, (2000, 3000 ALL 66/75), (2600, 3600 ALL 75/81 LESS CAB W/ MANL STRG), (2610, 3610 ALL 81/ 9/84 LESS CAB W/ MANL STRG) Rear drag link end

5.15 lbs.

Ball Joint

Dim./Info: A - 4.000" B - .687" - 18 LH

A-957E3307B

1.3 lbs.

Tie Rod


Ford A-C5NN3282E

2.18 lbs.

Tie rod end

Dim./Info: A - 19.000" B - .740"

NEW! A-86547157

Dim./Info: 19.15" Long


A-E3NN3307AA

1.62 lbs.

Short Tie Rod

Replaces: C5NN3307F

Used w/ A-C7NN3280D Long Tie Rod

For Models: (5000, 5200, 6600C, 7000, 7200, 7600C ALL W/ Wide Adjustable Front Axle)

A-C5NN3304U

Drag link assy

For Models: TW20, 4400, 4410, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7100, 7200, 7600, 7610, 8000, 8700, 9700, 9000 FOR WIDE ADJ AXLE, (5000, 7000 ALL W/PS), (8200, 8400, 8600, 9200, 9600 ALL 68-76 FOR WIDE ADJ AXLE) Front drag link end

16 lbs.

Dim./Info: A - 51.250" B - 1.250" For Models: 5000, 5100, 5340, 7000, 7100

A-E0NN3304CA

15.4 lbs.

Drag link end

Replaces: C7NN3304B

10.5 lbs.

Replaces: C5NN3A300A

Dim./Info: A - 9.000" B - .865"

Dim./Info: A - 50.500" For Models: 5100, 5900, 7100, (5600, 6600, 7600 ALL 75-81), (5000, 7000 ALL 9/70-75), (5610, 6610, 7610 ALL 9\70)

For Models: 4610, 4000 65-75, 4600 75-81

A-C7NN3307A

Rear drag link end

6.08 lbs.

5.1 lbs.

Rear drag link end

Short RH Outer tie rod

A-C7NN3A300A

Front drag link end

2.3 lbs.

Replaces: C5NN3A300D

Dim./Info: A - 7.875" B - .935"

2.95 lbs.

For Models: (6410, 7100 ALL W/ MANL STRG), (5000, 5100, 7000 ALL 68-75 ALSO 65-12/67 WHEN REPL NON THREAD LINK W/MANL STRG), (5600, 6600, 7600 ALL 75-81 W/MANL STRG), (5610, 6610 ALL 81 W/MANL STRG)

A-C5NN3307E Dim./Info: A - 19.000" B - .750" For Models: 4000 65-67, 4600 75-81, 4610 81

A&I PRODUCTS

1.8 lbs.

1.63 lbs.

For Models: 4000 ALL PURPOSE, (4600, 4610 ALL MANL / PS), (3430, 4130 ALL MANL STRG) Long LH Outer tie rod

Front drag link end

For Models: (5000, 5600, 5610, 6600, 6610, 7000 ALL 65-12/67 W/ MANL STRG)

Dim./Info: A - 3.750" B - .750" - 16 thread

A-C5NN3278A

A-C5NN3308C

Dim./Info: A - 3.750" B - 1.000"-16 LH thrd LH threads

Dim./Info: 41.500" long For Models: 4610, (2000, 3000, 4600 ALL 72), 4000 8/70-74

A-C5NN3289C

10.7 lbs.

Drag link

Replaces: C5NN3304T

Dim./Info: 47.500" long from cntr ball joint to end For Models: (5100, 6410, 7100 ALL W/ MANL STRG), (5000, 7000 ALL 65-75 REPL THREAD STYLE LINK USED 65-12/67), (5600, 6600, 7600 ALL 71-81 W/. MANL STRG), (5610, 6610 ALL 81 W/ MANL STRG)

Dim./Info: A - 40.000" For Models: 4000 4/70-75 W/MANL STRG, 4600 8/70-12-71 W/PS, 75-81 W/MANL STRG, 4610 81 MANL STRG

A-D0NN3307A

A-C7NN3304C

fax: 1-800-511-0516



Dim./Info: A - 3.812" B - 1.000" 16 RH thread

A-D0NN3A300A

2.78 lbs.

Tie Rod Tube

Replaces: C5NN3B624B

Rear drag link end

1.8 lbs.

Dim./Info: A - 5.031" B - 1.000"-16 RH thrd For Models: (5000, 5100, 7000 ALL 65-12/67 W/MANL STRG,FOR ORIGINAL STYLE)


1-800-657-4343

11


Ford A-C7NN3307B

Rear drag link end

8.6 lbs.

A-81878554

Dim./Info: A- 8.625" B- 1.100"

Dim./Info: A - 47.500" For Models: (6410, 7100, 7610 ALL W/ MANL STRG), 5100 W/MANL STRG, (5000, 7000 ALL 68-75 ALSO 65-12/67 WHEN REPL NON THREAD LINK W/ MANL STRG), (5600, 6600, 7600 ALL 75-81 W/MANL STRG), (5610, 6610 ALL 81 W/ MANL STRG)

A-C5NN3281C

LH outer tie rod

A-83984962

Dim./Info: A- 13.500" B- M22 X 1.5 RH THRD. For Models: (5610, 6610, 6710, 7610, 7710 ALL 4 WD W/APL325 AXLE), 5110 4 WD W/APL335 AXLE

A-81878554

Dim./Info: A- 8.625" B- 1.100"

4.1 lbs.

Replaces: C5NN3280N

For Models: (5110, 5610, 6410, 6610, 6810, 7610, 7710, 7810, 7910 ALL 4 WD W/ CAR709 AXLE)

Dim./Info: A - 17.500" B - .940"

A-E1NN3A302AA

Tie Rod

6 lbs.

Tie Rod

4.1 lbs.

For Models: (5100, 6410, 7100 ALL W/ MANL STRG), (5600, 5610, 6600, 6610, 7600 ALL 6/67 W/ MANL STRG), (5000, 7000 ALL 6/67-75 W/ MANL STRG) A-ZP0501308461

A-C5NN3280F

RH outer tie rod

4 lbs.

Dim./Info: A - 17.500" B - .940"

RH outer tie rod

1.7 lbs.

Replaces: C5NN3289D

Dim./Info: A - 4.250"

Tie Rod Clamp

A-ZP0501310060 A-ZP0501206191

A-ZP0501205206

Front drag link end

Tie Rod Tie Rod (RH)

Tie Rod Assy. (LH)

0.7 lbs.

Tie Rod (LH) Tie Rod

7.6 lbs. 2.8 lbs.

For Models: (6710, 7710 ALL FLAT DECK 1/82-4/84), 5900 MEXICO 1/82-4/84, 6410 UK ONLY 1/82-1/87, (5110, 5610, 6610 ALL 1/82-1/87), (6810, 7410, 7610 ALL 1/82-4/84)

A-CAR48983 A-CAR48982

Tie Rod (RH) Tie Rod (LH)

3.1 lbs. 3.1 lbs.

Dim./Info: A: 8.625" B: M18 X 1.5 RH THREAD

Dim./Info: A - 3.750" B - 1.000" - 16 LH For Models: 5100, 6000, 6600, 6610, 4400 1/65>, (5000, 7000 ALL 65-8/67)

fax: 1-800-511-0516

10.4 lbs.

0.24 lbs.

Replaces: C5NN3308D

A&I PRODUCTS

2.8 lbs. 7.6 lbs.

Replaces: E1NN3A302AB, E3NN3A302CA

A-ZP0501206190 A-ZP0501310060

A-E3NN3308BA

10.4 lbs.

For Models: (6710, 7710 ALL FLAT DECK 1/82-4/84), 5900 MEXICO 1/82-4/84, 6410 UK ONLY 1/82-1/87, (5110, 5610, 6610 ALL 1/82-1/87), (6810, 7410, 7610 ALL 1/82-4/84)

For Models: 5100, 6410, (7100, 7610 ALL W/ MANL STRG), (5000, 7000 ALL 6/67-75), (5600, 6600, 7600 ALL 75-81 W/ MANL STRG), (5610, 6610 ALL 81 W/ MANL STRG)

A-C5NN3287C

Tie Rod Assy. (RH)

Replaces: E1NN3A302AB, E3NN3N971BA

For Models: (5000, 5600, 5610, 6600, 6610, 7000 ALL 65-5/67 W/ MANL STRG)

A-C7NN3289E

For Models: 5110, 5610, 6610, 6810, 7410, 7610, 7910, (6710, 7710 ALL FLAT DECK), 5900 MEXICO, 6410 UK ONLY

A-ZP0501205207

For Models: (5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 ALL 1/65>)

12

3.16 lbs.

Tie Rod

For Models: (5600, 5610, 6600, 6610 ALL 65-5/67 W/ MANL STRG), (5000, 7000 ALL 65-67 W/ MANL STRG) LH outer tie rod

7.38 lbs.

Tie Rod

For Models: 5110, 5610, 6610, 6810, 7010, 7610, 7810, 7910, 8010, 7710 FLAT DECK, 6410 UK ONLY


1-800-657-4343



For Models: (5110, 5610, 6410, 6610, 6810, 7610, 7710, 7810, 7910 ALL 4 WD W/ CAR709 AXLE)

4.3 lbs.

Dim./Info: A - 17.500" B - .940"

A-C7NN3280F

3.16 lbs.

Tie Rod

Replaces: C5NN3307N


Ford A-CAR49006

A-CAR49001

2.2 lbs.

Ball Joint (LH) Dim./Info: A: 7.040" B: M20 X 1.5 RH THREAD C: M18 X 1.5 LH THREAD

2.2 lbs.

Ball Joint (RH)

3.69 lbs.

Long tie rod

For Models: 5100, 5600, 5900, 6410, 6600, 6810, 7100, 7600, (5610, 6610, 6710, 7610, 7810 ALL 85)

A-E3NN3278AB

Dim./Info: A - 17.750" B - 1.250"

Dim./Info: A - 15.375" B - .937"

For Models: 5100, 5600, 5900, 6410, 6600, 6810, 7100, 7600, (5610, 6610, 6710, 7610, 7810 ALL 81)

A-C5NN3282F

Dim./Info: A - 18.625" B - .937"

Replaces: C5NN3280E

Dim./Info: A - 15.375" B - .937"

For Models: 5100, 5110, 5600, 5610, 6410, 6600, 6610, 7100, 7600

A-E3NN3289AA

For Models: (5610, 6610, 7610 ALL PS 81-85), (5100, 7100 ALL W/PS 65), 5000 65, 5900 85

A-C7NN3B161A

Long Tie Rod LH

3.83 lbs. For Models: 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610

A-E3NN3N981AA

Dim./Info: A - 2.875" B - 1.250" - 12 RH

1.62 lbs.

For Models: 5110, 5610, 5900, 6410, 6610, 6810, 7610

Dim./Info: A - 3.750" B - 1.000" - 16

A-ZP0501205072

Dim./Info: A- 2.750" B- M18 X 1.5 RH THRD

4.48 lbs.

Tie rod

Dim./Info: A - 19.625" B - .937" For Models: (5200, 6600, 7200, 7600 ALL W/WIDE ADJUSTABLE FRONT AXLE)

A-C7NN3289C

Short Tie Rod Used w/ A-C7NN3280D Long Tie Rod Dim./Info: A - 7.375" B - 1.000" 16 RH thread

1.87 lbs.

Tie Rod End

For Models: 5900, 6700, 7100, (5600, 6600, 7600 ALL 75-81), (5610, 6610, 7610 ALL 81-3/85), (5000, 7000 ALL 9/70-75)

A-C5NN3280R

2.4 lbs.

Tie rod

For Models: (5600, 6600, 7600 ALL W/PS 75 / HI CLR 75-2/77), (5610, 6610 ALL W/PS 81-3/85), (5100, 7100 ALL W/PS 9/70), (5900, 7610 ALL 85) RH inner tie rod

2.42 lbs.

Tie rod

Dim./Info: A - 5.000"

Dim./Info: A - 18.125"

A-C7NN3289D

3.54 lbs.

Tie rod

3.74 lbs.

For Models: (5610, 6610, 6710, 7610, 7710, 7910, 8210 ALL ), 5600 W/ PS 75, 81-3/85, (6610, 7610 ALL W/ PS 81-3/85), (6600, 7600 ALL W/PS 75), 5610 W/PS 813/85, 5000 65, 5900 85 Long Tie Rod RH

7 lbs.

Tie rod

Replaces: C5NN3281B

A-C7NN3280E

2.46 lbs.

Tie rod end

Dim./Info: A - 3.625" .875" - 14 ID

For Models: 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5110, 5610, 6610, 6810, 7010, 7610, 7810, 7910, 8010, 7710 FLAT DECK

A-C7NN3281A

A-E3NN3B539AA

Dim./Info: 17.812" .935"

2.61 lbs.

For Models: 3230, 3430, 3930, 4130, 4630, 4830, 5030

NEW! A-E7NN3289DA

2 lbs.

Tie Rod

Dim./Info: 3.940" 15/16-16 UN RH THRD.

For Models: (8000, 9000, 9700 ALL FOR ALL PURPOSE AXLE), (5200, 7200 ALL 67 W/ALL PURPOSE AXLE W/PS), (8200, 8400, 8600, 8700, 9200, 9600 ALL 68-76 FOR ALL PURPOSE AXLE)

For Models: 3230, 3430, 3930, 4130, 4630, 4830, 5030

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

13


Ford A-81864100

Tie Rod End

9.9 lbs.

A-E9NN3N981AA

Cylinder End

Dim./Info: A- 5.00" B- 1.125- 16 RH THRD.

Dim./Info: A: 2.875" B: 1.250"-12 RH THREAD For Models: TS100, TS110, TS90, 5640, 6640, 7740, 7840

For Models: 5640, 6640, 7740, 7840

A-81864106

2.9 lbs.

3.52 lbs.

Tie Rod

A-E9NN3B539AA

Cylinder End

3.1 lbs.

Dim./Info: A: 3.750" B: .875"-14 RH THREAD

Dim./Info: A- 1.375" B- 19.875" For Models: 5640, 6640, 7740, 7840

3.3 lbs.

Tie Rod

Dim./Info: A- 3.625" B- 7/8- 14 RH THRD.

A-5109553

Tie Rod Assy. (RH)

8.7 lbs.

Tie Rod Ball Joint Assy. (RH)

5.6 lbs. 3.1 lbs.

For Models: TL100, TL70, TL80, TL90, TN55D, TN65D, TN75D, TN90F, TS110, TS90, 3430, 3830, 3930, 4030, 4130, 4230, 4430, 4630, 4830, 4835, 5030, 5635, 5640, 6635, 6640, 7635, 7740, 7840, (450, 540, 550, 640, 650, 750, 850 ALL 2 WD)

A-E9NN3278AA A-CAR48978 A-CAR49008

Tie rod (long)

Tie Rod Assy. (LH)

8.7 lbs.

For Models: TS100, TS110, TS90, 5640, 6640, 7740, 7840

A-E9NN3289AA A-CAR48979 A-9968018

3.56 lbs.

Tie rod

Dim./Info: A - 5" B - 1.125"-16 UN2A THRD

5.6 lbs. 3.1 lbs.

Tie Rod Ball Joint

9.88 lbs.

Dim./Info: A - 19.870" B - 1.250"

For Models: 5640, 6640, 7740, 7840, 8240, 8340

A-CAR121925

1.3 lbs.

Tie Rod

Dim./Info: A: 3.156" B: M20 X 1.0 RH THREAD

For Models: 5640, 6640, 7740, 7840

A-CAR121924


For Models: 5640, 6640, 7740, 7840, 8240, 8340

A-CAR49008

Ball Joint Assy. (RH)

3.1 lbs.

Dim./Info: A: 8.218" B: M22 X 1.5 RH THREAD C: M24 X 1.5 LH THREAD


A-D8NN3B539AB

Power Steering Cylinder End

Dim./Info: A - 3.687" .875" - 18 ID threads

For Models: 5640, 6640, 7740, 7840, 8210, 8240, 8340

A-5168933

Tie Rod Assy.

3.06 lbs.

Replaces: D5NN3B539C, D8NN3B539AA

24 lbs. For Models: TW10, TW20, TW30, 5700, 6700, 6710, 7700, 7710, 8000, 8700, 9700

Dim./Info: A: 54.500" B: 1.187" C: 1.440" For Models: TL100, TL70, TL80, TL90, TS100, TS90, 5640, 6635, 6640, 7635, 7740, 7840

14

A&I PRODUCTS

fax: 1-800-511-0516

A-D8NN3A302AA

Pwr Steering end

3.06 lbs.

Replaces: D5NN3A302C, D5NN3A302D

Dim./Info: A - 3.750" B - 1.000" - 16 RH For Models: TW15, TW25, TW30, TW5, 5700, 6700, 6710, 7700, 7710, 8000, 8700, 900, 9000, 9700


1-800-657-4343



A-81864114


Ford A-ZP0501205350

A-ZP0501205463 A-ZP0750125014

9.3 lbs.

Tie Rod Assy. (LH)

7.2 lbs. 2.2 lbs.

Tie Rod (LH) Ball Joint

For Models: 6710, 7610, 7710, (TW15, TW25, TW5, 7910, 8210 ALL 3/84>)

A-ZP0501205349

A-ZP0501205464 A-ZP0750125014

9.3 lbs.

Tie Rod Assy. (RH)

7.2 lbs. 2.2 lbs.

Tie Rod (RH) Ball Joint

A-C7NN3280D

Dim./Info: A - 19.625" B - .937" 9 notches on bottom For Models: (8000, 9000, 9700 ALL FOR ALL PURPOSE AXLE / WIDE ADJ AXLE), (8200, 8400, 8600, 8700, 9200, 9600 ALL 68-76 FOR ALL PURPOSE AXLE / WIDE ADJ AXLE)

A-D8NN3289DB

Dim./Info: A - 4.937" B - 1.000" 16 RH thrd

Dim./Info: A - 3.750" .875" - 18 ID threads

A-5168941

Tie Rod Assy. (LH)

33 lbs.

Tie rod

For Models: (8160, 8240, 8260, 8340 ALL 1/95>)

For Models: TW15, TW25, TW35, TW5, 7700, 7710, 7910, 8210

A-ZP0750137056

For Models: TW10, TW20, TW30, 8000, 8700, 9700

11.4 lbs.

Replaces: E2NN3N971AA

A-CAR49012

4.6 lbs.

Tie Rod (LH)

Replaces: CAR48980

Dim./Info: A: 6.750" B: M24 X 1.5 LH THREAD A-ZP0750137057 A-ZP0750125010

Tie Rod Assy. (RH) BALL JOINT

11.3 lbs. 3.1 lbs.

For Models: (TW15, TW25, TW5, 7910, 8210 ALL 1/83-12/84)

A-E3NN3307AA

1.62 lbs.

Short Tie Rod

A-CAR49014

4.6 lbs.

Tie Rod (RH)

For Models: 8210

A-CAR125215

Tie Rod Assy. (RH)

9.6 lbs.

Replaces: C5NN3307F

Used w/ A-C7NN3280D Long Tie Rod Dim./Info: A - 3.812" B - 1.000" 16 RH thread

A-CAR125217

A-E9NN3289BA

For Models: TW20, 4400, 4410, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7100, 7200, 7600, 7610, 8000, 8700, 9700, 9000 FOR WIDE ADJ AXLE, (5000, 7000 ALL W/PS), (8200, 8400, 8600, 9200, 9600 ALL 68-76 FOR WIDE ADJ AXLE)

A-C7NN3289C

Short Tie Rod Used w/ A-C7NN3280D Long Tie Rod Dim./Info: A - 7.375" B - 1.000" 16 RH thread

Tie Rod Assy. (LH)

9.6 lbs.

For Models: (8240, 8340 ALL 11/91-12/94)

3.78 lbs.

Tie rod (long)

Dim./Info: A - 4.75" B - 1.125 - 16 RH THREAD

2.61 lbs.

For Models: (8000, 9000, 9700 ALL FOR ALL PURPOSE AXLE), (5200, 7200 ALL 67 W/ALL PURPOSE AXLE W/PS), (8200, 8400, 8600, 8700, 9200, 9600 ALL 68-76 FOR ALL PURPOSE AXLE)

For Models: TS100, TS110, TS90, 8240, 8340

A-E9NN3B539BA

4.44 lbs.

Tie Rod



3.06 lbs.

Tie rod

1.86 lbs.

Long tie rod

For Models: TW15, TW25, TW5, 6710, 7610, 7710, 7910, 8210

A-E6NN3B539AA

4.75 lbs.

Long Tie Rod

For Models: TS100, TS110, TS90, 8240, 8340

A-E9NN3N981BA

3.94 lbs.

Tie rod

Dim./Info: A - 3.250" B - 1.250-12 RH THREAD For Models: TS100, TS110, TS90, 8240, 8340

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

15


Ford A-ZP0750137050 A-ZP0750137049

A-ZP0501205461 A-ZP0501205462 A-ZP0750125010

Tie Rod Assy. (RH) Tie Rod Assy. (LH)

11.4 lbs. 11.4 lbs.

8.3 lbs. 8.3 lbs. 3.1 lbs.

Tie Rod (LH) Tie Rod (RH) BALL JOINT

A-E2NN3289BA

Short Tie Rod

Dim./Info: A - 3.812" B - 1.000" - 16 thrd For Models: TW5 8/83 W/HD WIDE ADJ AXLE

A-D8NN3280DA

Long Tie Rod

Tie Rod Assy. (LH) Tie Rod Assy. (RH)

12.1 lbs.

Dim./Info: A - 36.875" B - 1.187" w/ 8 cross holes

For Models: TW15, TW5, 8530, 8630

A-ZP0501205309 A-ZP0501205310

1.74 lbs.

12.2 lbs. 12.2 lbs. For Models: TW10 79-83 7.7 lbs. 7.7 lbs. 4.5 lbs.

Tie Rod (RH) Tie Rod (LH) Ball Joint

A-D8NN3280EA

Long Tie Rod


For Models: (TW25, TW35, 8530, 8630, 8730, 8830 ALL 1/84-3/92)

A-86508662

Tie Rod (LH Thread)

2.5 lbs.

Replaces: 86507084, 86020751

For Models: TW10, TW30 STD WIDTH ADJ AXLE

A-D8NN3280FA

Dim./Info: A: 7.500" B: 1.250"-12 LH THREAD

Long Tie Rod

For Models: (TW10, TW30 ALL WIDE ADJ AXLE) Long Tie Rod

10.74 lbs.

Replaces: D5NN3280A

NEW! A-5178344


Long Tie Rod

Tie Rod End

9.85 lbs.

For Models: 8160, 8260, 8360, 8560, TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165

NEW! A-5178338

Dim./Info: A - 29.500' B - 1.187" w/ 7 cross holes

Tie Rod End

Short Tie Rod

2.94 lbs.

Replaces: D5NN3289A

Dim./Info: A - 8.625" B - 1.000" 16 RH thread

For Models: 8160, 8260, 8360, 8560, TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165

NEW! A-86018347

Cylinder End

Long Tie Rod


11.05 lbs.

4 lbs.

Dim./Info: 3.187" 1.00-16 UN RH THRD.

For Models: 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5

A-E2NN3280AA

17 lbs.

Dim./Info: 4.625" M32 X 1.5 RH THRD.

For Models: TW5 8/83 W/HD WIDE ADJ AXLE

A-E1NN3289AA

12 lbs.

Dim./Info: 35.50" 1.250"

For Models: TW10 REG DUTY SHORT WHL BASE, (8700, 9700 ALL 8/76-78)

A-E2NN3280BA

15.55 lbs.


For Models: (8670, 8770, 8870, 8970 ALL 9/93>)

A-E1NN3280AA

11.75 lbs.

For Models: (8670, 8770, 8870, 8970 ALL W/ FWD & Super Steer)

NEW! A-86020750

Tie Rod (RH Thread)

5 lbs.

Dim./Info: 7.250" 1 1/4-12 UNF RH THRD.

For Models: TW5 8/83 W/HD WIDE ADJ AXLE

For Models: (8670, 8670A, 8770, 8770A, 8870, 8870A, 8970, 8970A ALL Super Steer)

16

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-ZP0501205395 A-ZP0501205396 A-ZP0501205394


Ford NEW! A-86502997

A-E6NN3A303AA 12 lbs.

Tie Rod

Dim./Info: A: 2.120" B: .687"-18 RH THREAD

Dim./Info: 4.125" 1-1/8-12 UNF RH THRD.

For Models: (455, 555, 555A, 555B, 655, 655A ALL 7/87-11/88), (755, 755B ALL 7/87>)

For Models: 8670, 8670A, 8770, 8770A, 8870, 8870A, 8970, 8970A

NEW! A-86502993

A-D9NN3A303AB

Power strg cyl end (male thread)

3 lbs.

Tie Rod

1.1 lbs.

Cylinder End

1.04 lbs.

Dim./Info: A - 2.000" B - .687"-18 RH THRD

Dim./Info: 15.250" 1.180"

NEW! A-86502995

For Models: 550, 555, 555A, 555B, 655, 655A

2 lbs.

Cylinder End

Dim./Info: 1.250" 7/8-14 UNF RH THRD.

A-C5NN3A302B

REF. 1 (1) Rod end ball joint. Ball joint end includes: boot, clamp, nut, & zerc.

1.04 lbs.

Dim./Info: A - 1.875" B - .437"-20 F. thread

For Models: 8670, 8670A, 8770, 8770A, 8870, 8870A, 8970, 8970A

A-CAR87031

1.8 lbs.

Tie rod end, RH

For Models: 2000, 231, 234, 3000, 335, 3600, 4600 AG, 230A AGR, 531 IND

A-CAPN3300A

REF. 1 (1) Rod end ball joint. Ball joint end includes: boot, clamp, nut, & zerc.

Dim./Info: A - 4.160" B - 24X1.5" MM THREAD

Dim./Info: A - 1.875" B - .500"-20 F. thread

For Models: (250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D ALL W/ FWD)

A-CAR88759

1.8 lbs.

Tie rod end, LH

Replaces: CAR41447

Dim./Info: A - 4.160" B - 24X1.5" LH MM THRD


Tie Rod Assy.

Dim./Info: A: 54.060" B: 1.440"

For Models: (335, 3400, 532 ALL AND OTHER LATER SERIES W/DUAL DRAG LINK STEERING), 4410 IND, AND OTHER LATER SERIES W/DUAL DRAG LINK STEERING

A-E2NN3A540BJ

Male Ball Joint 1.06 lbs. fits A & I cylinders E2NN3A540BA, D4NN3A540A & C5NN3A739G-- NOT USED ON OEM CYLINDERS.

For Models: (250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D ALL W/ FWD)

A-E6NN3280AA

Dim./Info: A - 2.125" B - .687" - 18 thread

17 lbs.

For Models: 2000, 230A, 231, 234, 3000, 335, 3400, 3600, 4410, 4600, 531, 532, 601, 801 2 lbs. 2 lbs.

Tie Rod (LH) Tie Rod (RH)

A-D9NN3A302AB

Power strg cyl end (front)

2.2 lbs.

Tie Rod

1.09 lbs.

Dim./Info: A - 2.370" B - 1.000" C - .687"-18 RH THREAD

For Models: (550, 555, 555A, 555B, 655, 655A ALL 1/75-10/88), 455 7/87>

A-E7NN3N981BB

1 lbs.



For Models: 8670, 8670A, 8770, 8770A, 8870, 8870A, 8970, 8970A

Replaces: E7NN3N981BA

Dim./Info: A: 2.875" B: 1.100"

For Models: 550, 555, 555A, 555B, 655, 655A

For Models: (555, 555B, 655, 655A ALL 1/88-10/88), (455C, 455D, 555C, 555D, 575D, 655C, 655D, 675D ALL 11/88>)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

17


Ford A-83946036

Planetary Carrier

23.85 lbs.

For Models: (5110, 5610, 6610, 7610 ALL W/ APL335 4WD Front Axle)

A-83949049

Planetary Hub Shaft

A-83961190

Angle Ring, Differential Axle #: APL325, APL335, APL345, APL350, APL355

0.03 lbs.

For Models: 5110, 5610, 6610, 6710, 7610, 7710, 7910, 8210, TW15, TW25, TW5

1.35 lbs.

A-83934470

Replaces: 83946032

Differential Pinion Gear

7.52 lbs.

Replaces: 83927872


9.4 lbs.

Planetary Ring Gear

Replaces: 83946031

For Models: (5610, 6610, 6710, 7610, 7710, 7910, 8210 ALL W/ APL325 Front Axle)

A-E1NN3A328AB

Differential Hub Shaft

1.08 lbs.

Replaces: 83927740


A-83946053

Planetary Pinion Gear

1.47 lbs.

For Models: (5610, 6610, 6710, 7610, 7710, 7910, 8210 ALL W/APL325 4WD AXLE)

A-83927789

Differential Gear

7.52 lbs.


A-83934020

Differential Pinion Bearing Axle #: APL325, APL335, APL345, APL350, APL355

0.38 lbs. For Models: (5610, 6610, 6710, 7610, 7710, 7910, 8210 ALL W/ APL325 4WD FRONT AXLE)

A-E1NN1N045AA

Planetary Carrier

25.41 lbs.

Replaces: 83927791


A-83927803

Differential Retaining Ring Axle #: APL325, APL335, APL345, APL350, APL355

0.02 lbs.

For Models: (5610, 6610, 6710, 7610, 7710, 7910, 8210 ALL W/ APL325 Axle)

NEW! A-ZP0750110147

INNER HUB SEAL

0.54 lbs.

Replaces: 83961216, 81869544


18

A&I PRODUCTS

fax: 1-800-511-0516

For Models: 5110, 5610, 5900, 6410 (UK), 6610, 6610O, 6710, 6810, 7410, 7610, 7610O, 7710, 7910, 8210


1-800-657-4343



A-83954879


Ford NEW! A-ZP0730260617

A-ZP1927263

0.1 lbs.

0.2 lbs.

HALF SHAFT BUSHING

For Models: TW10, TW20, TW30, TW35

For Models: (5110, 5610, 6410 (UK), 6610, 6610O, 6710, 6810, 7410, 7610, 7610O, 7710, 7910, 8210 ALL w/ ZF Axles)

NEW! A-ZP0730260616

Oil Seal, Front Axle

A-ZP0750117306

Pivot Pin Bearing

0.27 lbs.

0.2 lbs.

HALF SHAFT BUSHING

For Models: 5610, 6610, 6710, 7610, 7710, 7910, 8210

NEW! A-E3NN4635AA

NEW! A-ZP4472351239

UNIVERSAL JOINT

1.02 lbs.

1.23 lbs.

Hub Pin

Replaces: E1NN3B626AA, 83927640, 83946561

For Models: 5110, 5600, 5610, 5700, 6600, 6600C, 6600O, 6610, 6610O, 6700, 6710, 6810, 7600, 7600C, 7610, 7610O, 7700, 7710, 7910, 8210, 8530, 8630, 8730, 8830, TW10, TW15, TW20, TW25, TW30, TW35, TW5

A-SBA334520190

Steering Arm (RH)

1.32 lbs.

For Models: 5110, 5610, 5900, 6410 (UK), 6610, 6610O, 6710, 6810, 7410, 7610, 7610O, 7710, 7910, 8210

A-85807964

0.1 lbs.


For Models: 1200 1/79> 2WD, (1110, 1210 ALL 1983-8/86 2WD)

A-SBA334520740

Steering Arm (RH)

2.12 lbs.

For Models: 8210 W/ CAR709 Front Axle, (8240, 8340 ALL W/ CAR709HD Front Axle), (5610, 6640, 7740, 7840 ALL W/ CAR709S2 Front Axle)

A-ZP0750110044


0.04 lbs. For Models: (1300, 1500 ALL W/ ADJUSTABLE AXLE 1/79> 2WD), (1310, 1510 ALL 1/83> 2WD)

NEW! A-SBA334520250

For Models: TW25, TW5, 6710, 7610, 7710, 7910, 8210

A-ZP0750110134


2 lbs.

0.29 lbs.

For Models: (1700, 1900 ALL 1/79> 2WD), (1710, 1910, 2110 ALL 1/83> 2WD)

For Models: TW15, TW25, TW5, 5110, 5610, 6610, 6710, 7610, 7710, 7910, 8210

A-ZP0750110156

Steering Arm (RH)




For Models: (5110, 5610, 6410 (UK), 6610, 6610O, 6710, 6810, 7410, 7610, 7610O, 7710, 7910, 8210 ALL w/ ZF Axles)

0.1 lbs.

A-SBA334522950

Steering Arm (LH)

2.2 lbs.

For Models: TW15, TW25, TW5, 6710, 7610, 7710, 7910, 8210 For Models: 1110 SN UB02393> 9/86> 2WD, 1210 SN UC09506> 9/86> 2WD

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

19


Ford A-SBA334524990

Steering Arm (LH)

2.3 lbs.

Steering Arm (RH)

Steering Arm

1.5 lbs.

For Models: TC30 RH, 1715 RH 1/93> 2WD, (1320, 1520, 1620 ALL RH/LH 1/87> 2WD), (1530, 1630, 1725 ALL RH/LH 10/96> 2WD), (TC25, TC29, TC33 ALL RH/LH 9/98> 2WD)

For Models: (1120, 1220 ALL W/ FIXED & ADJUSTABLE AXLE 1/87> 2WD), 1215 W/ FIXED AXLE 1/87> 2WD, TC18 W/ FIXED AXLE 7/98> 2WD

A-SBA334525000

NEW! A-SBA334524880

A-310799

1.6 lbs.

Steering arm

1.96 lbs.

Replaces: 957E3130

For Models: (1120, 1220 ALL W/ FIXED & ADJUSTABLE AXLE 1/87>), 1215 W/ FIXED AXLE 1/87>, TC18 W/ FIXED AXLE 7/98> 2WD

A-SBA334524230

Steering Arm (LH)

Steering Arm (RH)

Steering arm, RH Steering arm, LH

3.33 lbs. 3.3 lbs.

3.46 lbs.

For Models: 4000, 4330, 4340

For Models: (1120, 1220 ALL W/ FIXED AXLE 11/89> 2WD)

A-SBA334524260

A-C5NN3130C A-C5NN3131C

1.88 lbs.

A-D4NN3131C

Steering arm (LH)

8.86 lbs.

For Models: (1120, 1220 ALL W/ FIXED AXLE 11/89>)

NEW! A-SBA334521670

Steering Arm (RH)

3.54 lbs.

For Models: 4600 W/PS

A-D6NN3N670A

For Models: 2110 W/ POWER STEERING & 72" AXLE 1/83> 2WD

NEW! A-SBA334523060

Steering Arm (RH/LH)

3.74 lbs.

NEW! A-SBA334523520

Steering pitman arm

7.46 lbs.

For Models: 4600 1975-1981 W/ POWER STEERING

A-E1NN3590CA Steering Arm (RH/LH)

12.12 lbs.

For Models: (5600, 6600, 7600 ALL W/PS, 75-81), (5610, 6610, 7610 ALL W/PS, 81-3/85), (5000, 7000 ALL W/PS, 9/70-75), (5100, 7100 ALL W/PS, 9/70>)

A-C7NN3590A

For Models: (1720, 1920 ALL 1/87> 2WD)

Center steering arm

Arm, steering box

7.6 lbs.

3.64 lbs.

For Models: (3930, 4130, 4630, 4830, 5030 ALL W/ P. STRG.), 4610 W/O CAB, W/ P. STRG. For Models: (2120, 3415 ALL 1/87> 2WD)

20

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: DEXTA, NAA, 2100, 2600, 3100, 3600, 600, 700, 8N, 800, 900


Ford A-C5NN3130J

Steering arm RH Used w/ D2NN3105C, C5NN3105M, C7NN3105D A-C5NN3131J Steering arm LH

4.44 lbs.

A-D5NN3131B

LH steering arm

11.2 lbs.

Dim./Info: 39 tooth spline

7.6 lbs.

For Models: (TW15, TW25, TW5, 5700, 6700, 6710, 7700, 7710, 8700, 9700 ALL ALL W/LONG WHEEL BASE)

A-D5NN3130B

For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700

A-E3NN3130AA

RH steering arm NOTE: Tie rod attaches to top of steering arm. A-E3NN3131AA LH steering arm

RH steering arm


4.16 lbs. 4.12 lbs.

9 lbs.

For Models: (TW10, TW20, 5700, 6700, 6710, 7700, 7710, 8200, 8700, 9700 ALL ALL W/SHORT WHEEL BASE)

A-D5NN3131C

LH steering arm

7.12 lbs.

For Models: (5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610 ALL W/PS)

A-C5NN3130A

RH steering arm NOTE: Tie rod attaches to bottom of steering arm. A-C5NN3131A LH steering arm

3.74 lbs. 3.46 lbs.

For Models: (TW10, TW20, 5700, 6700, 6710, 7700, 7710, 8200, 8700, 9700 ALL W/SHORT WHEEL BASE)

A-D2NN3130A

4.3 lbs.

Steering arm

Replaces: C7NN3130A

LH on wide adj, RH on all purpose fronts

Dim./Info: 36 tooth spline For Models: (5100, 5600, 5610, 5900, 6600, 6610, 7100, 7600, 7610 ALL W/PS)

A-C5NN3590A

Steering pitman arm

6.06 lbs.

A-D2NN3131B

4.3 lbs.

Steering arm For Models: 8000, 8600, 9000, 9600

A-E9NN3130BA A-E9NN3131BA

Steering arm (RH) Steering arm (LH)

6.66 lbs. 6.7 lbs.

RH steering arm

7.08 lbs.

For Models: (5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 7100, 7600 ALL W/MAN STRG)

A-E9NN3131AB

6.8 lbs.

Steering arm, LH


A-D8NN3130HA

Dim./Info: 39 spline

For Models: 5640, 6640, 7740, 7840

A-E9NN3130AB

Steering arm (RH)

6.78 lbs.




For Models: (TW10, TW20 ALL W/LONG WHEEL BASE)

For Models: 5640, 6640, 7740, 7840

A-D5NN3130C

RH steering arm

7.06 lbs.


For Models: (5700, 6700, 6710, 7700, 7710, 8700, 9700 ALL W/LONG WHEEL BASE)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

21


Ford A-D8NN3131GA

LH steering arm

11.06 lbs.

A-C9NN1104E


Front wheel hub w/ stud bolts Hub uses WBKFD5 wheel bearing kit.

14.36 lbs.

For Models: (TW10, TW20 ALL W/LONG WHEEL BASE)

A-D8NN3130GC

RH steering arm

7.18 lbs. A-NT12 A-957E1139


0.61 lbs. 0.42 lbs.

1/2 - 20 wheel nut Hub cap

For Models: 2100, 2310, 2610, 2810, 2910, 3055, 3230, 3610, 3910, 3930, 4000, 4110, 4130AP, 4130N, 4410SU, 4600, 4610, 4610N, 4630, 601, 801, 4610SU 1981->

For Models: (TW10, TW20, TW30 ALL W/HVY DUTY AXLE)

A-C9NN1104D A-D8NN3131JA

LH steering arm

11.06 lbs.

Front wheel hub w/ stud bolts Hub uses WBKFD6 wheel bearing kit.

13.42 lbs.

For Models: (TW10, TW20, TW30 ALL W/HVY DUTY AXLE)

A-86511582

Front Wheel Hub Hub uses WBKFD1 wheel bearing kit.

11.98 lbs.

A-NT12 A-C5NN1130A

0.61 lbs. 0.64 lbs.


For Models: 5000, 5100, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 7100 FOR LH SPINDELS ONLY

A-313020

A-NT12 A-957E1139


Front Wheel Hub, 6 Bolt 12.56 lbs. Uses 249127 Hub Cap Not Available From A & I.

0.61 lbs. 0.42 lbs.

For Models: NAA, 8N

NEW! A-E1NN1104AA

Front Wheel Hub, 8 Bolt

24.5 lbs.

For Models: TW10, TW15, TW20, TW25, TW30, TW35, TW5, 8530, 8630, 8730, 8830

A-WBKFD7

WHEEL BEARING KIT

2.19 lbs.

For Models: TW10, TW15, TW20, TW25, TW35, TW5, 2030, 245C, 250C, 260C, 340B, 345D, 3500, 355, 3550, 3910, 420, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 4610, 5100, 5110, 515, 5200, 532, 540, 540B, 545, 545A, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6600C, 6610, 6610-0, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7600C, 7610, 7700, 7710, 8000, 8240, 8340, 8700, 9000, 9700, 4030 JAN-62, 340 25/27, (5000, 7000 ALL 63-75 FOR USE W/ 10:00X16 TIRES.), 3400 65/74

A-5166086

Front Wheel Hub, 6 Bolt

15.72 lbs.

A-C9NN1104F

Front wheel hub w/ stud bolts 14.5 lbs. Hub uses either WBKFD3 or WBKFD4 whl brg kit depending on spindle

A-NT12 A-957E1139


0.61 lbs. 0.42 lbs.

For Models: DEXTA, 2000, 2100, 2300, 2600, 2910, 3000, 3100, 3300, 3600, 3910, 4140, 501, 600, 700, 800, 900, (231, 531 ALL ORCHARD), 4000 55-64 USA BUILT, ORCHARD, 2000-3000 65-75 VINEYARD, 3900 7681, (2610, 3610 ALL 76-81 WITHOUT CAB)

For Models: (3430, 3930, 3930H, 3930N, 3930NO, 4130, 4130N, 4130NO, 4630, 4630D, 4630NO, 4830D, 5030, 5030 O ALL JUN-94), (4835, 5635, 6635, 7635 ALL 96)

A-SD12

STUD BOLT 1/2" X 2" (10/PACK) Wheel studs sold in lots of 10, priced per bolt.

1.23 lbs.

Dim./Info: knurl .612" X .675" long 1/2"x1-1/2" thread 1.500" long 1/2"-20 THREAD SIZE For Models: 495, 995

22

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343





Ford A-C5NN1015A

Front Wheel Rim

24.09 lbs.

Dim./Info: 6" BOLT HOLE DIAMETER FOR 4.00" X 19.00" TIRES

A-D5NN1007A

Front Wheel Rim For 9:00 x 16, 9:50 x 16, 10:00 x 16 Or 11:00 x 16 Tires

36 lbs.

Dim./Info: W8L -16H 6 BOLT 6" CIRCLE W/ 4 5/8" PILOT Offset: Out 5/16"

For Models: NAA, 600, 8N, 800

A-D5NN1007B

38 lbs.

Front Wheel Rim

For Models: FITS SEVERAL MODELS

NEW! A-VPJ2201

WHEEL BEARING KIT

2.63 lbs.

For Models: MAJOR, POWER MAJOR, SUPER MAJOR For Models: FITS SEVERAL MODELS

A-FW45166

Rim, Front Wheel

22.57 lbs.

Replaces: E6NN1007LA, 8N1015C, D2NN1007L, E9NN1007SA

Dim./Info: 6 Bolt Hub 16"X4.50E 6" [bolt circle]

For Models: SEVERAL

A-FW55166

Rim, Front Wheel

26.94 lbs.

Replaces: AL82488, JD3039, AL68277

Dim./Info: 6 Bolt Hub 16"X5.50F 6" [bolt circle]

For Models: MAJOR, SUPER MAJOR, 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6810, 7000, 7600, 7610, 7700, 7740, 7810, 7910, 8210

A-FW08166

Rim, Front Wheel



Dim./Info: 10L X 16 - 6 BOLT 6" BOLT CIRCLE 4 5/8" PILOT

31 lbs.

Dim./Info: 6 Bolt 8"x16"

For Models: SEVERAL

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

23


WHEEL BEARING KITS Part Number

Inner Cone

A-WBKFD1

15118

A-WBKFD2

15123

Inner Cup

Outer Cone

Outer Cup

HD78NFSLNUT

Seal

Sleeve

Application

NCA1190A

**

9N, 2N 39-47, 8N 48-52, NAA 5354

NCA1190A

**

(2000, 4000, 600, 700, 800, 900 ALL 55-64 USA BUILT)

**

(2000, 4000, 600, 700, 800, 900 ALL 55-64 USA BUILT)

Measure spindle brg size prior to ordering kit, same application could use A-WBK-FD3. A-WBKFD3

LM67048

LM67010

LM11949

LM11910

NCA1190A

A-WBKFD4

LM67048

LM67010

LM11949

LM11910

957E1190A

**

DEXTA, SUPER DEXTA, 2000, 2300, 2600, 3300, 3600, 3610, 3900, (231, 4000, 531 ALL ORCHARD), (3910, 4110 ALL 1981), 3000 6575, 2000-3000 65-75 VINEYARD, 2610 76-81 WITHOUT CAB

A-WBKFD5

LM48548

LM48510

LM11949

LM11910

310195

**

2310, 2610, 2910, 3610, 3910, 3930, 4110, 4130AP, 4130N, 4410SU, 4600, 4610, 4610N, 4630, 4610SU 1981->, 4000 65-75 EXC VINYARD

A-WBKFD6

LM501349

LM501310

M12649

M12610

E0NN1190AA

**

5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6810, 7600, 7610, 7700, 7740, 7840, 7100 FOR LH SPINDELS ONLY, (6700, 6710, 7710 ALL LOW OR HIGH CLEARANCE), (5000, 7000 ALL 65-75 NOT FOR USE W/10.00X16 TIRES)

A-WBKFD7

25590

25521

2474

2420

**

TW10, TW15, TW20, TW25, TW35, TW5, 5700, 6700, 7700, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, (5000, 5100, 5600, 6600, 7000, 7100, 7600 ALL 63-75 FOR USE W/ 10:00X16 TIRES.)

A-WBKFD8

B75

3720

2788

2720

**

TW10, TW20, TW30, TW35, TW5, 8000, 8530, 8630, 8700, 8730, 8830, 9700

**Sleeves are not included in this wheel bearing kit.

24

A&I PRODUCTS

RED indicates new part.

fax: 1-800-511-0516


1-800-657-4343



Measure spindle brg size prior to ordering kit, same application could use A-WBK-FD2.


Ford NEW! A-E1ADDN3123

A-D3NN3A042D BALL THRUST BEARING

0.74 lbs.

80 lbs.

Front Axle Support For Models L/ Mid Mounted Mowers

Replaces: 81816723, E27N3123B

For Models: MAJOR, POWER MAJOR, SUPER MAJOR

A-C0NN3123B

0.3 lbs.

Thrust bearing

For Models: 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3110, 3120, 3150, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4610, (2000, 4000 ALL 8/1970>)

For Models: 2300, 3300, 9N, (231, 531 ALL ORCHARD), 2N 39-47, 8N 48-52, NAA 53-54, (600, 700, 800, 900 ALL 55-64 USA BUILT), (2000, 4000 ALL 55-64 USA BUILT, ORCHARD), 2000-3000 65-75 VINEYARD, 3900 75-51, (2610, 3610 ALL 76-81 WITHOUT CAB), (2600, 3600 ALL 76-81, VINYARD)

A-C0NN3A299A

For Models: TW10, TW15, TW20, TW25, TW30, TW35, TW5, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8240, 8340, 8530, 8630, 8700, 8730, 8830, 9000, 9700

A-E5NN3029BA

FRONT AXLE SUPPORT

42.38 lbs.

For Models: (5200, 7200 ALL 67->)

0.42 lbs.

Thrust Bearing

Front radius rod support bracket

A-C5NN3N056A

Rear radius rod support bracket

23.58 lbs.

For Models: (5200, 7200 ALL 67->)

A-2N3039

Front Axle Support Bushing 0.2 lbs. For Models 1939 Thru 1964 W/ Standard Front Axle Except Major & Dexta.

250 lbs.

Replaces: C7NN3029G

For Models: NAA, 2N, 600, 700, 8N, 800, 9N, 900, (2000, 4000 ALL )

A-C7NN3153B

For Models: TW10, TW20, TW30, 3500, 3550, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700

A-C7NN3405B

0.12 lbs.

For Models: 2300, 3300, (231, 531 ALL ORCHARD), (600, 700, 800, 900 ALL 55-64 USA BUILT), (2000, 4000 ALL 55-64 USA BUILT, ORCHARD), 2000-3000 65-75 VINEYARD, 3900 76-81, (2610, 3610 ALL 76-81 WITHOUT CAB), (2600, 3600 ALL 76-81, VINYARD)

Radius Rod (RH) For Models With Power Steering.

12.6 lbs.

For Models: (2600, 3600, 3900, 4600SU ALL 1/1975> L/CAB W/ POWER STEERING), (2610, 2910, 3610, 3910, 4610SU ALL 1/1981-9/1984 L/CAB W/ POWER STEERING), (2000, 2100, 2110, 3000, 3100, 4000, 4110, 4140 ALL 8/1970> W/ POWER STEERING)

A-E0NN3N442BA

Socket, Radius Rod Ball

1.36 lbs.

For Models: 2000, 3000, 4000

26

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: (2000, 2100, 3000, 3055, 3100, 3120 ALL 1965 THRU 7/1970)


Ford A-E0NN3N406BA

0.4 lbs.

Socket, Radius Rod Cap

A-312659

Hvy Duty Front Axle Pin, threaded

Replaces: 313319

Dim./Info: 1.750" O.D. 4.71" LONG For Models: NAA, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610

For Models: 2000, 3000, 4000

A-C5NN3403A

1.39 lbs.

Front Support Spacer

0.74 lbs.

A-C5NN3N160A

Dim./Info: 2.130" OD 1.760" ID 2.235"-2.240" long

Front Axle Pin, rear

1.84 lbs.

Dim./Info: 1.250" OD 5.150" long

For Models: (2000, 3000 ALL 65-\7\70)

A-2N3126E

1.78 lbs.

Front Axle Pin

For Models: 5000, 5100, 5110, 5200, 5600, 5610, 6410, 6600, 6610, 6710, 7000, 7100, 7200, 7600, 7610, 7710


Front Axle Pin, front

For Models: 2N SN )

A-E4NN3127AA

5.22 lbs.

Front Axle Pin

3.42 lbs.

Front Axle Pin

Replaces: C5NN3127C

For Models: 2100, 2110, 2120, 231, 2310, 233, 2600, 3055, 3100, 3120, 3310, 333, 3600, 4110, 4140, 4600, 531

Dim./Info: 1.750" OD 7.94" long For Models: (2300, 3300 ALL 65/), (2600V, 3600V ALL 75/), (3910V, 4110V, 4610V ALL 82/)

A-C5NN3127B

1.46 lbs.

Front Axle Pin

Replaces: C5NN3127A

Dim./Info: 1.750" OD X 4.250" Long For Models: 4110, 4140, (2000, 3000 ALL W/MANUAL OR PS 65-7\70)

A-C5NN3128B

Locking Flange

0.36 lbs.


A-C5NN3N159A

For Models: (2000, 3000 ALL 65>)

A-NCA3127A

Front Axle Pin, Threaded 1.42 lbs. For Models W/ All Purpose And LCG Front Axles 1953 Thru 1964.

Dim./Info: 1.750" O.D. 4.500" LONG For Models: NAA, 600, 800, (2000, 4000 ALL W/ MANUAL STEERING), (3000, 4000 ALL 9/1968> W/ MANUAL STEERING), 2000 9/1968> W/ MANUAL SYSTEM

A-83424343

BALL BRG., STEERING GEAR (PACK/20) 0.01 lbs.

Replaces: 353075S

Dim./Info: 1.625" OD 1.498" ID 2.0" long For Models: 2000, 2600, 3000, 3600, 5100, 5110, 5600, 5610, 5900, 6410, 6610, 7100

A-C5NN3575A

6.36 lbs.

Shaft, Rocker

Used With E1ADKN3556 Ball Race

Dim./Info: 14 USED FOR MAIN NUT 10 USED UPPER SHAFT BRG. 10 USED LOWER SHAFT BRG.

For Models: (5000, 5340, 7000 ALL W/ Manual Steering), (5100, 7100 ALL W/ Power Steering)

A-C5NN3517A For Models: MAJOR, SUPER MAJOR, 2600, 2610, 3600, 3610, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600, (3900, 5110, 5900, 6410, 7610 ALL W/ MANUAL STEERING)

A&I PRODUCTS

fax: 1-800-511-0516



A-C9NN3575A For Models: 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610

Bushing, steering shaft

0.11 lbs.

For Models: 2000, 2300, 2600, 3000, 3400, 3500, 3550, 3600, 4000, 4410, 4600, 4610, 5000, 5100, 5110, 550, 5600, 5610, 5900, 6410, 6600, 7000, 7100, 7600


1-800-657-4343

29


Ford A-E1ADDN3524

Steering shaft w/ nut

7 lbs.

Steering Shaft Assy.

1.92 lbs.

Dim./Info: 6 Tooth 13.350" Long

5.78 lbs.

Dim./Info: 23.250" Long 35 Spline

Steering shaft & nut

Manual Steering shaft w/ nut

6.14 lbs.

6.04 lbs.

Dim./Info: 26.250" long For Models: 2000, 2600, 3000, 3600, 3900

A-C7NN3N575A

Steering shaft, sinlge pitman

3.36 lbs.

Dim./Info: 28.750" long For Models: (5000, 5100 ALL 1965> W/ Manual Steering), 5600 1975> L/ Cab W/ Manual Steering, 5610 1/1981>, (6600, 6600C ALL 1975> L/ Cab W/ Manual Steering), 6610 1/1981>, 7000 1965> W/ Manual Steering, 7600 1975> L/ Cab W/ Manual Steering

3.06 lbs.

Replaces: C5NN3N576A

For Models: 2000, 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532

A-E4NN3A710BA


7.58 lbs.


7.04 lbs.

Dim./Info: 24.031" LONG For Models: (MAJOR, SUPER MAJOR ALL 1/52-8/58)

A-E0NN3A710AC

Dim./Info: 8 Tooth 36 Spline 9.125" Long

Steering shaft & nut

Dim./Info: 35" LONG For Models: (5600, 6600, 7600 ALL W/ CAB / MAN STRG)

A-E1ADKN3524B For Models: 2000, 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532 Steering shaft, double pitman

6.64 lbs.

Upon Installation, Threaded End Will Spiral CLOCKWISE Away From Steering Wheel (Reverse Worm)

A-D4NN3A710C


A-C7NN3N576A

Manual Steering shaft w/ nut

Replaces: C5NN3A710B

Dim./Info: 26.125" LONG For Models: (4400, 4500, 515, 535 ALL W/ MAN STRG)

A-D2NN3A710B

Dim./Info: 26.125" LONG 36 Spline For Models: (3500, 3550 ALL W/ MAN STRG), 4600 W/ MAN STRG / W/O CAB

A-D2NN3A710A

For Models: 600, 800, (2000, 4000 ALL W/ MAN STRG), (5110, 5610, 5900, 6410, 6610 ALL 81> W/ MAN STRG)

2.46 lbs.

A-9N3526

Steering Sector Gear (RH)

7.69 lbs.

Steering Sector Gear (LH)

7.8 lbs.

Replaces: NCA3590A

For Models: NAA, 600, 700, 800, 900, 8N SN 216989> (1/1949-1952), (2000, 4000 ALL 4 CYL. W/ MAN STRG), 4600 75-3/76 W/ MAN STRG

A-C5NN3548F

Steering gear housing

For Models: 2N, 9N

A-9N3527

For Models: 2N, 9N

7.5 lbs.

Replaces: C5NN3548A

NEW! A-9N3517

Steering Sector Gear Bushing



For Models: (2810, 2910, 3910, 4110, 4610, 4630, 4830, 5030 ALL W/ P. STRG.)

0.14 lbs.

For Models: 2N, 9N For Models: (5100, 5600, 7100 ALL W/ MAN STRG), (6600, 7600 ALL 75-3/76 W/ MAN STRG)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

33


Ford A-E1NN3C516BA

Hyd control valve housing, steering

4.16 lbs.

A-D7NN3600A

2.5 lbs.

STEERING WHEEL (15")

Replaces: D2NN3600A

Dim./Info: 15" DIAMETER

For Models: (5610, 5900, 6610, 7610 ALL SOUTH AFRICA / BRAZIL, W/PS)

A-C9NN3N583B

Steering housing side cover

3.4 lbs.

For Models: 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010

A-E2NN3A540KIT

REF. 3 (1) Universal PS Cylinder Kit, RH/LH 10.92 lbs.

Replaces: E2NN3A540A or E2NN3A547AA.

Cyl comes w/E2NN3A540BJ base ball joint end.

A-2N3600

STEERING WHEEL

Dim./Info: Cyl has .500" dia rod w/ .437" dia male thrd

3.85 lbs.

Dim./Info: KEYED HUB

A-E2NN3A540BA For Models: (2N, 9N ALL 1939-47)

A-C5NN3A302B A-8N3600

Steering Wheel

3.99 lbs.

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL ), 250C, 260C, (3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400 ALL 1965>), (340A, 340B ALL 8/1981>), (3500, 3550, 4100 ALL 1965>), 420 W/ Torque Conv. 1975-7/1981, 4400 1965>, 445 ) For Models: 550, 555A, 555B, 5550

A-D8NN8005SB

Radiator w/ oil cooler

23.68 lbs.

A-F2NN8005FA15L

Dim./Info: core size: 18" wide 17.500" high 3 rows of tubes 8 fins per inch.

34 lbs.

Radiator

Dim./Info: CORE SIZE: 19.5" WIDE 17.250" HIGH 4 ROWS OF TUBES 8 FINS PER INCH

For Models: 545 W/ TORQUE CONV. 7/11-88, 535 W/TORQUE CONV, (345C, 445C ALL 12-88\12-9), (4500, 5100, 5200 ALL 65), (5600, 6600, 6600C ALL 75) For Models: 555D W/NOISE CONTROL

38

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


For Models: 550 75\7-81

For Models: 345C, 545A, 545C, (445, 545 ALL W/O TORQUE CONVERTER 10/85-11/88), 445C 12/88>, 445A 6/85-11/88, 545D 9/92> Radiator

23.32 lbs.

Dim./Info: core size: 17.500" wide 17.750" high 3 rows of tubes 5 fins per inch

Dim./Info: CORE SIZE: 18" WIDE 17.250" HIGH 4 ROWS OF TUBES 8 FINS PER INCH

A-F2NN8005EA15L

23 lbs.

Radiator

Replaces: C5NN8005N

Oil cooler fitted


Ford A-E7NN8005CA

35 lbs.

Radiator

A-E9NN8005BA

Radiator w/ cooler


Dim./Info: CORE SIZE: 18" WIDE 20.750" high 5 rows of tubes 7 fins per inch.

For Models: (555C, 555D, 575D, 655C, 655D ALL 11/88>)

A-E7NN8005DA

For Models: 750, 7500, 755, 755A, 755B

33.1 lbs.

Radiator

A-E9NN8005AB15M Radiator Dim./Info: core size: 18" wide 16" high 3 rows of tubes 8 fins per inch.

For Models: (555C, 555D, 655C ALL W/O NOISE CONTROL 11/88-8/93)

33.22 lbs.

Radiator


For Models: (3230, 3430, 3930, 3930H, 3930N, 4130, 4130N, 4130NO, 4630, 4630N, 4630NO, 4630O ALL ALL 3\90)

A-E4NN8005AA

20.7 lbs.

Radiator

Dim./Info: core size: 18.000" wide 16.0" high 3 rows of tubes 7 fins per inch.

For Models: (555C, 555D ALL W/NOISE CONTROL 11/88-8/93)

A-F2NN8005CA15L Radiator w/ oil cooler

22.6 lbs.


33.28 lbs.

A-C7NN8005E

21 lbs.

Radiator



cooling system



A-E7NN8005EA

38 lbs.

For Models: 5100, 5600, 6600, 5000 6/68-> For Models: (575D, 655D, 675D ALL W/O NOISE CONTROL)

A-F2NN8005DA15L Radiator

A-D8NN8005KB 33.44 lbs.

Radiator W/ Cooler

33.06 lbs.

Replaces: D8NN8005KA, D5NN8005A

W/ OIL COOLER

Dim./Info: Core Size: 18" Wide 17 3/4" High 4 Rows Of Tubes 8 Fins Per Inch


For Models: (5600, 6600, 7600 ALL W/ Diesel Engine) For Models: (575D, 655D, 675D ALL W/NOISE CONTROL)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

39


Ford A-D6NN8005D

27.17 lbs.

RADIATOR

Dim./Info: Core Size: 20.000" Wide 19.875" High 3 Rows Of Tubes 7 Fins Per Inch

A-E7NN8005BA

Radiator w/ or w/o cooler Cooler fitting is to the rear side.

33 lbs.


For Models: 7610, 7810, 6810 W/AIR 6\89 For Models: (5700, 6700 ALL W/ AC 8/1976>)

A-E1NN8005BD15M RADIATOR A-D2NN8005D

39 lbs.

Radiator

40.25 lbs.

Dim./Info: Core Size; 20.000" Wide 23.500" High 5 Rows Of Tubes 8 Fins Per Inch

cooling system

For Models: (7910, 8210 ALL 1982>) For Models: 6500

A-D5NN8005P A-E0NN8005GC15M Radiator W/ Oil Cooler

30.71 lbs.

42.5 lbs.

Radiator

Oil cooler fitted

Replaces: E0NN8005GB15M, E0NN8005GA15M, E0NN8005HA15M


For Models: (5110, 6410, 6610, 7410, 7610 ALL W/O Air Conditioning)

A-E1NN8005EB15M Radiator W/ Cooler

32.6 lbs.

Replaces: E1NN8005EA15M, D6NN8005F, D5NN8005T, D5NN8005B

For Models: 8700 8-76\78

A-E3NN8005AD15M Radiator

51.94 lbs.

Oil cooler fitted

Dim./Info: CORE: 19.937" HIGH 20.00" WIDE 3 ROWS OF TUBES 10 FINS/INCH


For Models: (6710, 7700, 7710 ALL W/ Air Conditioning)

A-D3NN8005B

Radiator w/ cooler Cooler fitting is to the rear side.

33 lbs.

For Models: TW10, TW20 W/O AC, (TW5, 8530 ALL 83-)


For Models: 7000, 7100, 7200

40

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


Dim./Info: Core: 17.875" High 18.500" Wide 5 Rows Of Tubes 7 Fins Per Inch


Ford A-E3NN8005BD15M Radiator

54.94 lbs.

A-E1ADKN8333

0.34 lbs.

Filler Hose

Oil cooler fitted

Dim./Info: A- 1.750"


For Models: MAJOR, POWER MAJOR, SUPER MAJOR

A-2N8100A

RADIATOR CAP

0.25 lbs.

For Models: TW20 W/ AC, (TW15, 8630 ALL 83-)

A-E3NN8005DE15M Radiator

54.72 lbs. For Models: (2N, 8N, 9N ALL 1943-1952)


A-1T8100A2

Radiator Cap (4 lb)

3 lbs.

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL , (1700, 1900 ALL 1979>)

A-SBA145016510

Water Pump

8.1 lbs.

For Models: (5110, 5610, 6610, 6710, 7610, 7710 ALL 10\88), (2000, 3000, 4000, 5000, 7000 ALL 1965-75), (2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81), (2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610 ALL 2\90)

A-FAPN8A513HH

For Models: (1710, 1710O ALL 1983>)

A-SBA145016540

Water Pump

Water pump W/ single pulley

15.04 lbs.

Replaces: 87800122-R

11.3 lbs.

For Models: 5110, 5610, 6410, 6610, 6710, 6810, 7010, 7410, 7610, 7710

For Models: (1910, 2110 ALL 1983>), 2120 1987-2/1999

44

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


For Models: (1210, 1310 ALL 1983>), (1120, 1215, 1220 ALL 1987>)

15 lbs.

Water pump w/ double pulley

Replaces: 87800109, 8508AA


Ford A-FAPN8A513AA

12.7 lbs.

Water pump w/ double pulley

Replaces: E7NN8A513CE

A-FAPN8A513LL

Water Pump, W/ pulley

12.5 lbs.

Replaces: EGPN8A513BA, 8508, EAPN8A513G

Fan threads onto Hub

For Models: TW10, TW15, TW20, TW25, TW30, TW35, TW5, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700

For Models: (5110, 5610, 6610, 6710, 6810, 7410, 7610, 7710 ALL 11/88>), 7010 4/96>

A-87800115

16.69 lbs.

WATER PUMP

A-87800712

23.9 lbs.

Water pump

Replaces: F0NN8501CC, F0NN8501CB, F0NN8501CA, 87801112

Replaces: D8NN8501UC, C5NE8501A, D3NN8501A, D8NN8501CA, C5NN8501A, C5NN8501A, D5NN8501E, D8NN8501UA & UB

A-87800712-R

Re-Mfg. Water Pump

25 lbs.

For Models: (5110, 5610 ALL 1710 1715 1720 1725 1900 10/1979> 1900 SN U902326> 10/1979> 1900 1/1979 - 9/1979 1910 1925 2N 2000 AG TRACTOR 3 CYL 2000 2600 2610

Ref. #

Lower Rad. Hose.

Ref. #

54 28 53 70 69 65 69 71 43 31 43 31 43 31 31 55 59 60 64 55 56 64 57 64 65 61 66 65 69 58 65 69 62 76 77 67 65 65 69 77 63 62 68 69 6 24 32 32 32

957E8286 312588 957E8286 SBA310161430 86519855 86519855 SBA310161630 86526943 86526943 86549674 D8NN8B274AB

52 3 52 86 84 84 79 85 85 78 36

D8NN8B274AB

36

D8NN8B274AB

36

SBA310160790 SBA310160770 SBA310160740

88 74 80

SBA310160300 SBA310160740 SBA310160300 SBA310160740 SBA310161091 SBA310160310 SBA310160441 SBA310161091 86519855 SBA310160060 SBA310161091 86519855

72 80 72 80 81 75 82 81 84 73 81 84

SBA310160441 SBA310161091 SBA310161031 86519855

82 81 87 84

SBA310160150 SBA310160850 86526943 312588

76 83 85 3

C5NN8286B C5NN8286B

34 34

cooling system


Model/ Special Applications


A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

51


RADIATOR HOSES See hose drawings and dimensions on pages directly before applications.

Upper Rad. Hose

| D5NN8260D | | | F0NN8260AA | D5NN8260D | C5NN8260D | D5NN8260D | | E9NN8260AA | F0NN8260AA | C5NN8260D | C5NN8260D | C5NN8260D | D5NN8260D | C5NN8260D | D5NN8260D | F0NN8260AA | D5NN8260D | D6NN8260A | C5NN8260D | D5NN8260D | D5NN8260D | F0NN8260AA | | C5NN8260D | C5NN8260E | | C5NN8260D | D5NN8260D | D5NN8260D | C5NN8260D | D5NN8260D | D6NN8260A | D5NN8260D | D6NN8260A | E9NN8260AA | F0NN8260AA | F0NN8260BB | C5NN8260M | D5NN8260D | F0NN8260BB | E6NN8260CA | C5NN8260D | | C5NN8260D | D5NN8260D | C5NN8260D | D5NN8260D | D4NN8260A | D5NN8260D | D4NN8260A | D5NN8260D

3000 3055 3100 3230 ALL PURPOSE 3 CYL. 335 340 UTIL TRACTOR 75/81 340 3400 3430 ALL PURPOSE 3 CYL. 3430 ALL PURPOSE 3 CYL. 3500 3550 3600 3600 3610 3610 3930 ALL PURPOSE 3 CYL. 4000 4100 4100 4100 4110 4130 IND. 63/64 4140 420 4200 DSL. 4200 GAS 445 SKID-STEER 445 450 4600 4600 4600 4610 4610 4630 ALL PURPOSE 3 CYL. 4630 ALL PURPOSE 3 CYL. 4830 5000 5000 5030 5100 515 UTIL TRACTOR 5200 535 540 545 545 550 550 555 555

Ref. # 32

4 32 24 32 5 4 24 24 24 32 24 32 4 32 45 24 32 32 4 24 39 24 32 32 24 32 45 32 45 5 4 20 33 32 20 29 24 24 32 24 32 26 32 26 32

Lower Rad. Hose.

Ref. #

C5NN8286B C5NN8286B C5NN8286B

34 34 34

C5NN8286B C5NN8286B

34 34

C5NN8286B C5NN8286B

34 34

C5NN8286B

34

C5NN8286B

34

C5NN8286B

34

C5NN8286B

34

C5NN8286D C5NN8286D C5NN8286C C5NN8286B

8 8 35 34

C5NN8286B

34

C5NN8286B

34

C5NN8286C C5NN8286B

35 34

D5NN8286F

19

D0NN8286A C5NN8286C C5NN8286B C5NN8286C C5NN8286B D3NN8286G

40 35 34 35 34 2

D3NN8286G

2


52

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


cooling system




Upper Rad. Hose

| D4NN8260A | C5NN8260D | D5NN8260D | E6NN8260CA | D5NN8260D | E6NN8260CA | F0NN8260CA | D5NN8260C | D5NN8260D | E6NN8260CA | NAA8260B | | | D5NN8260D | | E6NN8260CA | E6NN8260CA | C5NN8260D | C5NN8260M | D5NN8260D | E6NN8260CA | C5NN8260M | D5NN8260D | E6NN8260CA | F0NN8260CA | C5NN8260D | D4NN8260C | D5NN8260C | D5NN8260D | NAA8260B | D5NN8260D | | E6NN8260CA | | | D1NN8260B | D1NN8260B | | | | | C5NN8260D | D5NN8260D | E6NN8260CA | | D5NN8260D | E6NN8260CA | D4NN8260C | D5NN8260C | D5NN8260D | E6NN8260AA | E6NN8260BA

555B 5600 5600 5600 5610 5610 5640 5700 5900 5900 600 AP 55/57 134" 6000 650 IND. TRACTOR TLB 6500 6500 IND. 655 IND. TRACTOR TLB 655A IND. 6600 6600 6600 6600 6610 6610 6610 6640 6700 6710 4 CYL. 6710 4 CYL. 6710 700 7000 7000 7100 7100 7200 750 IND. 7500 IND. TRACTOR TLB 7500 755 755A 755B 7600 7600 7600 7600 7610 7610 7700 4 CYL. 7700 4 CYL. 7700 7700 7700 4 CYL.

Ref. # 26 24 32 29 32 29 25 41 32 29 28

32 29 29 24 33 32 29 33 32 29 25 24 1 41 32 28 32 29

42 42

24 32 29 32 29 1 41 32 27 46

Lower Rad. Hose.

Ref. #

D3NN8286G C5NN8286C C5NN8286B D5NN8286F C5NN8286C D5NN8286F F0NN8286AB D6NN8286B C5NN8286C

2 35 34 19 35 19 16 15 35

312588 C0NN8286A D3NN8286G C5NN8286C D3NN8286G D3NN8286G D3NN8286G C5NN8286C C5NN8286C C5NN8286B D5NN8286F

3 21 2 35 2 2 2 35 35 34 19

C5NN8286C D5NN8286F F0NN8286AB

35 19 16

E8NN8286BA D6NN8286B C5NN8286C 312588 C5NN8286B C5NN8286C D5NN8286F C5NN8286C D0NN8286A D8NN8286AA D1NN8286B D8NN8286AA D8NN8286AA D8NN8286AA D8NN8286AA

17 15 35 3 34 35 19 35 40 38 7 38 38 38 38

C5NN8286B D5NN8286F C5NN8286C C5NN8286C D5NN8286F

34 19 35 35 19

C5NN8286B

34

cooling system




A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

53



Upper Rad. Hose

| D4NN8260C | D5NN8260C | D5NN8260D | E6NN8260AA | E6NN8260BA | F0NN8260CA | F0NN8260DA | NAA8260B | D2NN8260B | D8NN8260BB | D8NN8260CA | F0NN8260DA | F0NN8260DA | 9821598 | D8NN8260BB | D8NN8260CA | 9821598 | 9821598 | 9821598 | 2N8260 | | NAA8260B | C9NN8260A | D2NN8260C | D8NN8260CA | D8NN8260BB | D8NN8260CA | 2N8260 | |

7710 4 CYL. 7710 4 CYL. 7710 7710 7710 4 CYL. 7740 7840 800 8000 8000 8000 8240 8340 8670 ALL PURPOSE 8700 8700 6 CYL. 8770 ALL PURPOSE 8870 ALL PURPOSE 8970 ALL PURPOSE 8N 8N 900 9000 6 CYL. 9000 6 CYL. 9000 6 CYL. 9700 9700 9N A64 A66

Ref. # 1 41 32 27 46 25 44 28 37 43 13 44 44 12 43 13 12 12 12 6 28 18 14 13 43 13 6

Lower Rad. Hose.

Ref. #

E8NN8286BA C5NN8286C

17 35

F0NN8286AB

16

312588 C7NN8286A D8NN8B274AB D6NN8286C F0NN8286AB F0NN8286AB 9821599 D8NN8B274AB D6NN8286C 9821599 9821599 9821599 8N8286 312588 312588 C9NN8286A D6NN8286C

3 9 36 10 16 16 11 36 10 11 11 11 23 3 3 30 10

D8NN8B274AB D6NN8286C 312588 D3NN8286E D3NN8286E

36 10 3 22 22


54

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


cooling system



BELTS: ALT, FAN, STEERING, WATER PUMP Fan

(2N, 8N, 9N ALL SN ), (TW5, TW15, TW25, TW35 ALL 1/82 9/91), (532, 531, 515, 335, 333, 233, 231 ALL 1/75-12/81), 445 1/78-5/85,(530A, 334, 234 ALL 1981>), 250C 1989>, 340B, 340A, 340, 256

A-385279S2

Connecting Rod Nut Used W/ E4TN6214AA Connecting Rod Bolt.

0.03 lbs.

A-F0NN6300FB

103 lbs.

Crankshaft

Replaces: C5NE6303K

For Models: (3610, 3910 ALL GAS 1981-04/1982), (2000, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 ALL W/ GAS OR DIESEL ENGINES)

A-E4TN6214AA Dim./Info: 76T on bal. gear For Models: 5000 FIT 256 4CYL 4.203 STROKE (.500 GEAR) ALSO IN 233 CU IN, (5500, 5610, 6000, 6600, 6700, 7000 ALL FITS 256 4CYL 4.203 STROKE (.500 GEAR) ALSO IN 233 CU. IN.)

A-D9NN6303AA

0.14 lbs.

For Models: (3610, 3910 ALL GAS 1981-04/1982), (2000, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 ALL W/ GAS OR DIESEL ENGINES)

103 lbs.

Crankshaft

Connecting Rod Bolt

A-E8NN6250AA

11.82 lbs.

Camshaft

Replaces: C7NN6250E

Dim./Info: .625" wide bal. gear w/ 78T For Models: (6610, 6710, 7710 ALL 4CYL 268 CU. IN. 4.406 STROKE)

NEW! A-D8NN6316AC

Crankshaft Damper Pulley

17 lbs.

Dim./Info: 3 Groove

engine parts


For Models: (3000, 3500, 3600 ALL FITS 175 CU. IN. ENG 4.203 STROKE 3CYL / 183 / 192 CU IN ENG)

For Models: (2000, 2600, 2610, 3000, 3055, 3100, 335, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 420, 4200, 4400, 4410, 4500, 4600, 4610, 515, 532, 535, 545, 550, 555 ALL FOR 3 CYL DSL), (3610, 3910 ALL GAS 1981-04/1982)

A-E6TN6250AA

19.02 lbs.

Camshaft

Replaces: C7NN6250B, E1TN6250AA

For Gas Or Diesel Engines

For Models: TW10, TW20, TW30, TW35, TW5, 7910, 8210, 8530, 8630, 8730, 8830

A-EAF6306B

Crankshaft Gear

1 lbs.

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL )

2 lbs.

Manifold Elbow Used With NAA5230E Muffler. A-NAA55232A EXH FLANGE GASKET

Exhaust Manifold Gasket (Diesel)

engine parts


For Models: (NAA, 2000, 4000, 600, 800, 900 ALL W/ 4 CYL. GAS ENGINE / HORIZONTAL EXHAUST)

A-310074

Exh Flange Gasket Use W/ B9NN9425A Manifold

0.5 lbs.

13.22 lbs.


For Models: 3500, 3550 1968-69, (2000, 3000, 4000 ALL 3CYL GAS OR DSL BUILT 1965-75)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

59


Ford A-E0NN5C250BA

Exh. Elbow Gasket

0.04 lbs.


A-C9NN5B209A

Gasket, Front Cover

0.03 lbs.

For Models: 8N SN 263843>

Exh. Elbow Gasket

0.05 lbs.

For Models: TW20, TW30, 6600, 6600C, 6600O, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B, 7600, 7600C, 7700, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700

A-C0NN9448C

A-8N6020C

Manifold Gasket

A-8N6018

Timing Gear Cover, Side Gasket

0.01 lbs.

For Models: 2N, 8N, 9N

A-8N6050A

Cylinder Head (Gas)

25 lbs.

0.06 lbs.

For Models: (2N, 8N, 9N ALL 1939-52)

engine parts

For Models: NAA, NAB, 4000 SERIES, 2000 SERIES, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1821, 1841, 1871, 1881

A-9N9448

Manifold Gasket

0.08 lbs.

A-8N6051B

Head Gasket

0.38 lbs.

For Models: (2N, 8N, 9N ALL 1939-52)

A-8N6051AM

Head Gasket (Metal)

0.12 lbs.


A-310658

Intake & Exhaust Gasket Fits All Models 1956-64 With Diesel Engines

0.01 lbs. For Models: (2N, 8N, 9N ALL 1939-52)

A-B9NN6051A

Head Gasket (Diesel)

0.6 lbs.

For Models: 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901, (2000, 4000 ALL W/ Holley Carb.#'s: R4111, R8554

A-MSCK65

Complete Carburetor Kit 0.5 lbs. Kit Contains Parts Necessary For Major Carburetor Overhaul / For OEM Carb.#'s C0NN9510C & 312955

For Models: (2000, 600, 700, 800 ALL W/ 4 Cylinder Engine & Small Carburetor)

A-2N9166

Bail & Nut Assy.

0.1 lbs.

Used W/ Short Bowl.

For Models: (4000, 801, 901 ALL 1958-64 W/ MARVEL SCHEBLER CARBURETOR TSX769, 813) For Models: 2N, 8N, 9N

A-9N9564

Needle & Seat

0.03 lbs.

A-NAA9160

Gasket, Sediment Bowl (10 Per Pack)

0.01 lbs.

Used W/ Short Bowl

Dim./Info: 2" OD For Models: ALL MODELS

A-E8NN9D278AA

Fuel Shut Off Solenoid Assy.

0.23 lbs.


A-311275

Gasket, Sediment Bowl Used In C0NN9155A Sediment Bowl Assy.

For Models: (7610, 7710 ALL 1981 - 10/1991), (5610, 6610 ALL 1981 1993), 6710 1981 - 9/1985, L785 4/1983>, 5110 5/1984 - 10/1991, 755B 1987 - 1/1993, L783 7/1988>, (555C, 655C ALL 11/1988 8/1993), (6810, 7410 ALL 4/1989 - 10/1991), (3430, 3930, 4630 ALL 3/1990>), 3230-3/1990 - 9/1993, 4830 7/1990 - 5/1994, (5640, 6640, 7840, 8240, 8340 ALL 11/1991>), 5030 10/1992>, (555D, 655D, 675D ALL 9/1993>), (L865, L885 ALL 10/1994>), (LX865, LX885 ALL 11/1994>)

68

A&I PRODUCTS

fax: 1-800-511-0516

0.02 lbs.

For Models: 2000, 4000, 600, 700, 800, 900


1-800-657-4343


For Models: 2000, 4000, 600, 700, 800, 900


Ford A-17C40

0.3 lbs.

Sediment Bowl

A-81823388

0 lbs.

Pre-Cleaner Assembly

Dim./Info: 2 7/16" TALL

Dim./Info: 6.89" Bowl Dia. 2.362" Inlet Dia. 3.937" Body Height

For Models: ALL MODELS

A-17C4857

0.1 lbs.

Fuel Filter Bail & Nut Assy

For Use W/Tall Bowl

For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 3910H, 4000, 4110, 4600, 4610, 4610H, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 5900, 6600, 6700, 6810

A-C9NN9A660D

3.58 lbs.

Pre-Cleaner

Replaces: 81826245


A-D8NN9162BA

1 lbs.

Fuel Filter Bowl

For Models: TW20 1/79-12/82, 9000 1/69-12/78, 9200 1/69-9/72, 9600 10/72-7/76, 9700 8/76-12/78, (A64, A66 ALL 1/74-12/83)

For Models: TW10, TW20, TW30

A-C9NN9A663A

0.6 lbs.

Precleaner Bowl

A-C0NN9A663A

Precleaner Bowl

Dim./Info: A - 7.250" B - 3.500" C - 3.000" D - 4.000"

Dim./Info: A - 10.500" B - 3.625" C - 2.750" D - 3.500"

For Models: 3055, 335, 340, 3400, 4400, 4410, 4600, 4610, 5100, 5110, 515, 532, 540, 5600, 5610, 5900, 6000, 6600, 6610

For Models: TW10, 340, 4400, 4410, 5110, 540, 5610, 5640, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7200, 7410, 7610, 7710, 8000, 9000

A-82008248

A-C5NN9A660A


1.14 lbs.

Dim./Info: 2.250" ID tube 7.0" high For Models: 340, 4140, 4200, 4400, 4410, 515, 5200, 532, 540, 5500, 5550, 3400 65-74

A-C5NE9600F

Air Cleaner Assy. (6")

8.08 lbs.

Replaces: C5NE9600A

For Models: 7840, 8240, 8340

A-C5NN9A660B

Precleaner Base

3.74 lbs.

Pre-Cleaner

1 lbs.

engine parts


For Models: 2N, 600, 700, 8N, 800, 9N

Precleaner Base

1.06 lbs.

Dim./Info: 2.185" ID tube 6.250" high

For Models: 2100, 2120, 231, 233, 2600, 3100, 3120, 3300V, 333, 340, 4200, 4400, 3310 NARROW ORCHARD, 3400 65-74, 2110 65-75, 2300V 75-81

A-D3NN9A660D

Precleaner Base


1.34 lbs.

Dim./Info: 2.437" ID tube 8.500" high

For Models: 4600, 5600, 6600, 6700

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

69


Ford A-C5NE9600E

Air cleaner assy. 7"

9.9 lbs.

A-E4NN94000N20AF Cab Air Filter

1.79 lbs.

Replaces: 81863349, 83960937

For Models: (TW15, TW25, TW35, TW5, 5610, 5900, 6410, 6610, 6810, 7410, 7610, 7710, 7810, 7910, 8210 ALL 10/1985> W/ SUPER Q CAB), (8530, 8630, 8730, 8830 ALL 3/1990>) For Models: 4000, 5000

A-C5NN9B640B

A-D8NN94000N20BA Cab Air Filter Air cleaner hose, lower outlet

0.44 lbs.

1.53 lbs.

Replaces: 83913701

Dim./Info: A - 2.000" B - 2.187"

For Models: (2000, 3000, 4000 ALL DIESEL)

A-9N9652

Air Cleaner Hose Air Cleaner to Carburetor Hose for all Models W/O CAB)

A-E1NN17365AA For Models: 2300, 2310, 3100, 3300, 3310, 3400, 3500, 3550, 4200, 4400, 4410, 4500, (2000, 4000 ALL DSL 65-75), 3000 GAS /DSL 3\67-75

0.73 lbs.

Tach Cable

Replaces: 83904958, D5NN17365C, 83929603

Dim./Info: 61 1/2" Long

For Models: TW15, TW25, TW35, TW5, 8700, 9700, (TW10, TW20, TW30 ALL 1/1979-12/1982), (7810, 7910, 8210 ALL 12/1987> W/ CAB), (8530, 8630, 8730, 8830 ALL 12/1998> W/O CAB)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

71


Ford A-C5NF17373B

Tachometer Drive Housing

0.03 lbs.

NEW! A-MSCK56

Complete Carburetor Kit (Marvel Schebler) 0.5 lbs. Kit Contains Parts Necessary For Major Carburetor Overhaul

For Models: 2000, 3000, 4000, 5000

A-F1NN17N275AA

Tachometer Adapter Cable

0.04 lbs.

Replaces: D3NN17N275A, E9NN17N275AA, E9NN17N275AB

For Models: (2N, 8N, 9N ALL 1939-1952 W/ Marvel Schebler Carb.# TSX241A, B & C)

Dim./Info: 4 3/8" Long For Models: 2310, 234 10/1975-9/1978, 2600, 2610, 2810, 2910, 334 10/1975-9/1978, 3600, 3610, 3910, 4100, 4110, (420, 445 ALL 10/1975-9/1978), 4600, 4610, 5110, 535 10/1975-9/1978, 545, 5600, 5610, 6600, 6610, 6810, 7600, 7610

engine parts

Water Temperature Sending Unit


A-C4AH10884A

0.06 lbs.

For Models: 2000 1965-1975, 2600 Gas 1975-5/1976, Diesel 1975-3/1976, 3000 1965-1975, 3600 Gas 1975-5/1976, Diesel 1975-3/1976, 4000 1965-1975, (4100, 4600 ALL Gas 1975-5/1976, Diesel 1975-3/1976), 5000 1965-1975, (550, 555, 555A, 555B ALL 1975-3/1976), (5600, 5700 ALL Diesel 1975-3/1976), (655, 655A ALL 1975-3/1976), (6600, 6700 ALL Diesel 1975-3/1976), 7000 1965-1975, (7600, 7700 ALL Diesel 1975-3/1976), 8000

A-1909102 For Models: (TW30, TW35 ALL 1979>)

A-E1NN6714BB

1.58 lbs.

Oil Filter

Replaces: 4625547, 4600875, 4648371, 4730586

filters


Spin On Type

0.83 lbs.

Oil Filter

Spin On Type

Dim./Info: 5.842" Tall 2.950" O.D. For Models: 3435 W/ 8035.06 ENGINE For Models: 1000 W/ 2 Cyl. Engine, 1500, 1600 W/ 2 Cyl. Engine, 1700, 1710, 1900, 1910

A-E1NN6714AB

A-C7NN6714A

1 lbs.

Oil Filter

Spin On Type

0.92 lbs.

Oil Filter

Replaces: E1NN6714AA

Spin On Type

Dim./Info: 3.157" Tall 3.670" O.D.

For Models: (4000, 600, 601, 800, 801 ALL )

A-86546609 A-SBA140516180

Engine Oil Filter

17 lbs.

Replaces: E8NN6714BA, D8NN6714LA, D2NN6714C, D5NN6714A, 81827183, 83918040

For Models: 1100, 1110, 1200, 1300, 1510

0.75 lbs.

Oil Filter

Spin On Type

Dim./Info: 4.840" Tall 2.950" O.D. For Models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7000, 7600, 7610, 7700, 7710

For Models: 1120, 1210, 1220, 1310

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

73


Ford A-C5NN6714A

1 lbs.

Oil Filter

A-E7NN6714BA

3 lbs.

Oil Filter

Spin On Type

Dim./Info: Spin On Type

For Models: (TW-10, TW-20 ALL 7/1979>) For Models: 540A W/ 201 Diesel Engine, (5500, 5550 ALL W/ Gas or Diesel Engine), (5600, 6600, 6700 ALL W/ 4-256 Engine)

A-47P97

Engine Oil Filter

A-CPN6731B 1 lbs.

Oil Filter 0.75 lbs. Cartridge Type For Tractors Which Have Not Been Converted To Spin-On Type Filter

Replaces: 83963907, 87800083, 83947505, 89832924, E4NN6714BA

Spin On Type

Dim./Info: 12/PACK 3.694" O.D.

A-EDPN9N074AA

For Models:

A-CFPN6731B

0.43 lbs.

Fuel Filter

1 lbs.

Oil Filter

Cartridge Type

filters

Dim./Info: 2 Quart

For Models: (SUPER 4, SUPER 6, 2000, 3000, 4000, 5000, 7000 ALL 1965>), (8000, 9000 ALL 1968>), (650, 6500, 750, 7500 ALL 1973>)

A-81715763

0.25 lbs.

Fuel Filter

Replaces: E110Z9, EPN99162A

For Models: (2000, 3000, 4000, 5000 ALL 1965-10/1969), (8000, 8600, 8700, 9000, 9600, 9700, TW-10, TW-20 ALL 1968-6/1979)

A-DGPN6731A

1 lbs.

Oil Filter

Replaces: CFPN6731B

Cartridge Type For 3, 4 & 6 Cylinder Engines 1965-1979

For Models: (MAJOR, POWER MAJOR ALL W/ Turbo), 7000 10/1971-1975 W/ Turbo, 7600 1975-1981 W/ Turbo, 7610 1981> W/ Turbo, 7700 1975-1981 W/ Turbo, 7710 1981> W/ Turbo

74

A&I PRODUCTS

fax: 1-800-511-0516

0.25 lbs.

Fuel Filter

NEW! A-SBA360720020

FUEL FILTER

0.1 lbs.

For Models: 1000, 1110, 1120, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1520, 1530, 1600, 1620, 1630, 1700, 1710, 1710O, 1715, 1720, 1725, 1925, TC18, TC21, TC21D, TC24D, TC25, TC25D, TC29, TC29D, TC30, TC33, TC33D


1-800-657-4343


For Models: 600, 800, NAA


Ford A-D8NN9176AA

0.6 lbs.

Fuel Filter

A-D6NN9R500A

Air Filter

0.54 lbs.

Replaces: 83908367, 83903595

Inner Filter

For Models: (TW10, TW20, TW30, 7810, 7910, 8210, 8401, 8530, 8630, 8730, 8830 ALL 1979-1982), (TW15, TW25, TW35, TW5 ALL 1983>)

A-F0NN9176BA

0.94 lbs.

Fuel Filter

Replaces: 87800220, 81866615, 87840509

For Models: (550, 555, 555A, 555B ALL 1975-7/1981), (2600, 3600, 3900, 4600 ALL 4/1976>)

A-D6NN9R500B

1.2 lbs.

Air Filter

For Models: 5640 W/ POWERSTAR 4.4 ENGINE, 6640 W/ POWERSTAR 5.0 ENGINE, 7740 W/ POWERSTAR 5.0T ENGINE, 7840 W/ POWERSTAR 6.6 ENGINE, (8240, 8340 ALL W/ POWERSTAR 7.5 ENGINE), 3435 W/ 8035.06 ENGINE, 5635 W/ 8045.05 ENGINE, 4835 W/ 8045.06 ENGINE, (6635, 7635 ALL W/ 8045.25 ENGINE)

A-309991

0.83 lbs.

Air Filter

1.4 lbs.

A-E6NN9R500FB

Air Filter

2.31 lbs.

Inner Filter

For Models: 1110, 1120, 1210, 1215, 1220, 1310, 1510

For Models: TW15, TW20, 8630, 9700

1 lbs.

Air Filter

Single Element

A-D6NN9601A

Air Filter

1.84 lbs.

Outer Filter

For Models: 1910 1983-4/1984

A-86512889

Air Filter

Inner Filter

For Models: TW10, TW5, 555C, 655, 655A, 655C, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8401, 8530, 8600, 8700, (8000, 8200 ALL 8/1972>), (550, 555, 555A, 555B ALL 9/1981>)

Single Element

A-E9NN9601FA

A-D1NN9R500A

0.58 lbs.

Fuel Filter

For Models: (600, 700, 800, 900 ALL W/ DIESEL ENGINE)

A-86512886

For Models: 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5610, 5900, (5600, 5700, 6600, 6700 ALL 4/1976>)

filters


Inner Filter

2 lbs.

Air Filter

For Models: (550, 555, 555A, 555B ALL 1975-7/1981), (2600, 3600, 3900, 4600 ALL 4/1976>)

A-D9NN9601AA

Single Element

Air Filter

3.42 lbs.

Outer Filter

For Models: 1720, 1920, 2110, 2120, 3145, 1910 5/1984> For Models: 555C, 655, 655A, 655C, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 8600, 8700, (2600, 3600, 3900, 4600, 5600, 5700, 6600, 6700 ALL 1975-3/1976), (8000, 8200 ALL 8/1972>), (550, 555, 555A, 555B ALL 8/1981>)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

75


Ford A-D6NN9601B

2.4 lbs.

Air Filter

A-D8NNF933AC

Hydraulic Filter

1.72 lbs.

Outer Filter

For Models: 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5610, (5600, 5700, 6600, 6700 ALL 4/1976>)

NEW! A-E9NN9B618AA

For Models: (5000, 7000 ALL 1971->)

2.4 lbs.

Air Filter

Replaces: D6NN9601B, 83904357, 83908365

NEW! A-F2NN6714AB

1.25 lbs.

Oil Filter

Replaces: 81879134, 81878046, 9575317, 83999976

For Models: 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5610, (5600, 5700, 6600, 6700 ALL 4/1976>)

6.84 lbs.

Air Filter

Outer Filter

For Models: 5640, 6640, 7740, 7840, 8160, 8240, 8260, 8340, 8360, 8560, 8670, 8770, 8870, 8970, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TS100, TS110, TS115, TS80, TS90

For Models: TW15, TW20, 8630, 9700

filters

NEW! A-1909143

STEERING FILTER

0.48 lbs.

For Models: 3435, 3935, 4135, 4635, 4835, 5635, 6635, 7635

A-SBA340500370

Hydraulic Filter

0.75 lbs.

Dim./Info: 4.06" TALL 3.250" O.D.

For Models: (1120, 1220, 1320, 1520 ALL W/ HST)

A-D6NNB486A

Hydraulic Filter

1.22 lbs.

For Models: 3910, 4110, 4600, 4610, 5600, 6600, 6700, 7600, 7700, (2600, 3600 ALL W/ GEAR TYPE PUMPS), (2310, 2610, 3610 ALL W/ TANDEM MOUNTED PUMPS 1981 THRU 1983), (5610, 6610, 6710, 7610, 7710 ALL W/ VERTICAL EXHAUST)

76

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


A-E6NN9B618BB


Ford A-D1NN14301H

0.44 lbs.

Ground Strap

A-C7NN14301C

Battery to Ground Cable

Dim./Info: 7" LONG

0.9 lbs.

Dim./Info: 34" LONG


A-FAE14301B

0.52 lbs.

Ground Strap

Dim./Info: 6 VOLT, 11" LONG For Models: 8N 1948-52, (NAA, 600, 700, 800, 900 ALL 1953>)

A-D1NN14301G

0.54 lbs.

Ground Cable

Replaces: D1NN14301F

For Models: (2000, 4000 ALL 1963-65), (3000, 5000 ALL 1965-75 DIESEL), (2600, 3600, 4600, 5600, 6600, 7600 ALL 1975-81 DIESEL), (2310, 2610, 3610, 4610 ALL 1981-8/82 DIESEL), (5110, 5610, 6410, 6610, 6810 ALL 1981>)

A-311228

Fits Models 1958-64

Starter to Battery Cable

0.56 lbs.

Fits Models 1958-64

Dim./Info: 12 VOLT, 14" LONG For Models: 600, 700, 800, 900, (2000, 4000 ALL )

A-26A209

Starter to Switch Cable

0.4 lbs.

Dim./Info: 9" LONG

A-26A215

Starter To Battery Cable

Starter to Switch Cable

0.6 lbs.

Dim./Info: 15" LONG

For Models: ALL MODELS, (2000, 3000, 4000, 5000 ALL 1965> W/ GAS ENGINE)

A-9N14300A

For Models: ALL MODELS, (2000, 3000, 4000, 5000 ALL 1965> W/ GAS ENGINE)


0.6 lbs.

A-9N11450A

Starter Switch (Push Type)

For Models: (2N, 9N ALL SN 12499> 1940-47)

A-D1NN14300G

Starter To Switch Cable

0.6 lbs.

Dim./Info: 6 VOLT 10" LONG

For Models: 9N SN )

A-8N14300B

Starter To Battery Cable

A-E4NN11350AA

STARTER DRIVE

3 lbs.

0.66 lbs.

Dim./Info: 12" LONG For Models: 8N 1939-1952

A-26A108

Battery Connector Cable

1 lbs.

Dim./Info: 90 DEGREE ANGLE 8" LONG, 1 GAUGE For Models: FITS SEVERAL MODELS

A-26A104

Battery Connector Cable

1.02 lbs.

For Models: (TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4110, 4130, 4600, 4610, 4630, 5000, 5110, 550, 555, 555A, 555B, 5600, 5610, 5700, 5900, 6410, 655, 655A, 655C, 6600, 6610, 6700, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700 ALL W/ DIESEL ENGINE)

A-D8NN11350CA

Starter Drive (Remanufactured)

Dim./Info: 9 1/2" LONG For Models: FITS SEVERAL MODELS

78

2 lbs.

Replaces: 1996487, 405C DELCO

Dim./Info: 10" LONG

A&I PRODUCTS

For Models: NAA, 600, 700, 800, 900

fax: 1-800-511-0516


1-800-657-4343

3 lbs.


electrical / ignition / lights

Starter To Switch Cable

1.15 lbs.

Dim./Info: 90 DEGREE ANGLE 10" LONG, 2/0 GAUGE


A-FAA14431B

2.01 lbs.


Ford A-5211350C

3 lbs.

Starter Drive (new)

A-E4NN11390AC

Starter Solenoid

4 lbs.

Replaces: E4NN11390AA

For Models Lucas Equipped

For Models: (2N, 8N, 9N ALL 1939-12/1952)

A-D-16C

1.5 lbs.

STARTER DRIVE

Replaces: Delco# 1850844

For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610 Starter Solenoid 2.72 lbs. Solenoid For D8NN11000CE Starter. (FOR REPLACEMENT STARTERS ONLY, NOT FOR OEM REPLACEMENT)

A-D7NN11390B 3 lbs.

SOLENOID,24V,30MT,3 TERM.

Battery Hold Down Bolt

0.16 lbs.

For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4110, 4600, 4610, 5000, 5110, 550, 555, 555A, 555B, 5600, 5610, 5700, 5900, 6410, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710

A-D2AF11450AA

2.2 lbs.

STARTER SOLENOID

2 lbs.

Replaces: Lucas 77010

For Models: 8600 10/72 - 7/76 DIESEL, (2000, 3000, 4000, 5000 ALL 1965> GAS OR DIESEL), (3900, 4600, 5600, 6600, 7600, 7700 ALL 1975> DIESEL)

For Models:

A-C5NN5161C

STARTER DRIVE

For Models: (2000, 3000, 4000, 5000 ALL 1965> W/ GAS ENGINE, 8 SPEED TRANSMISSION & 4 1/2" STARTER)


NEW! A-SD-55

A-D2NN11350B

Starter Relay Assembly

0.36 lbs.

Switch Assy


0.8 lbs.

For Models: (2000, 3000, 4000 ALL 1965> W/ 4 1/2" DIAMETER STARTER), 7000 7/71> W/ 5" DIAMETER STARTER

A-8N11500

A-C7NN7A247A

Neutral Start Switch

0.19 lbs.

For Models: (2000, 2100, 3000, 3100, 3400, 4000, 5000 ALL 1965> W/ 4 Speed Transmission), (3500, 3500, 3550, 4500, 4500 ALL 1965> W/ Torque Converter Transmission), (420, 445, 532, 535, 545 ALL 1975> w/ Torque Converter Transmission)

A-C7NN7A247B

Neutral Start Switch



A-VPF2224

For Models: (TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4110, 4130, 4600, 4610, 4630, 5000, 550, 555, 555A, 555B, 555C, 5600, 5610, 5700, 5900, 655, 655A, 655C, 6600, 6700, 6710, 6810, 7000, 7410, 7610, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700 ALL LUCAS EQUIPPED W/ DSL ENG. & 5" STARTER - D8NN11000CD)

0.18 lbs.

For Models: (3500, 3550, 4500 ALL 1965> W/ TORQUE CONVERTER TRANSMISSION), (2000, 2100, 3000, 3100, 3400, 4000, 5000 ALL 1965> W/ 4 SPEED TRANSMISSION), (420, 445, 532, 535, 545 ALL 1975> W/ TORQUE CONVERTER TRANSMISSION)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

79


Ford A-311007 Relay Assy. (6 Volt) 4 CYL MODELS (W/ 6 VOLT GAS 1958-64)

0.8 lbs.

A-21A807

Spark Plug

Dim./Info: CHAMPION H10 14MM THREAD 7/16" REACH 13/16" HEX SHOULDER

For Models: 600, 800, 900

A-NCA11450A

1.1 lbs.

Sold In Multiples Of 8.

Relay Assembly (6 Volt)

0.7 lbs.


A-21A805

1 lbs.

Spark Plug


For Models: (600, 700, 800, 900, NAA ALL 1953-57 6 Volt)


A-8N11450

Relay Assembly (6 Volt)

0.3 lbs.


A-A7NXF For Models: 2N 1/42-12/47, 8N 1/48-12/52, 9N 1/39-12/41

A-311006

Relay Assy (12 Volt) For all 12 Volt Diesel Models 1958-64 Except Lucas Equipped

0.3 lbs.

Spark Plug 0.07 lbs. Sold In Multiples Of 8. (Used On Walk Behind Lawn Mowers W/Note: Sold In Multiples Of 8. (Used On Walk Behind Lawn Mowers W/Briggs & Stratton Engines, Rotary TStratton Engines & Ford Chain Saws).

Dim./Info: CHAMPION CJ8 14MM THREAD 3/8" REACH 3/4" HEX SHOULDER

For Models: 1811, 1821, 1841, 1871, 1881, 2030, 2120, 2130, 4030, 4120, 4130, 501, 541, 601, 611, 621, 631, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981


A-C0NF12405A

Spark Plug

A-C7NN10N507A

Instrument Cluster Voltage Stabilizer

0.06 lbs.

For Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600

Dim./Info: AUTOLITE 216 14MM THREAD 7/16" REACH 13/16" HEX SHOULDER For Models: ALL MODELS

A-21A874 A-21A810

Spark Plug 0.58 lbs. Sold In Multiples Of 8. For 4 Cylinder Gas Tractors 1950-64 Using Unleaded Fuel.4 Using Unleaded Fuel.

Dim./Info: CHAMPION H12 14MM THREAD 7/16" REACH 13/16" HEX SHOULDER

A-21A882

1.14 lbs.

Spark Plug

0.56 lbs.


Dim./Info: AUTOLITE 405 MEDIUM/HOT TYPE PLUG 14MM THREAD 3/4" REACH 13/16" HEX SHOULDER


Dim./Info: CHAMPION RH18Y 14MM THREAD 13/16" HEX SHOULDER 7/16" REACH For Models: ALL MODELS


A&I PRODUCTS

0.6 lbs.

Dim./Info: AUTOLITE 437 14MM THREAD 13/16" HEX SHOULDER 7/16" REACH

A-C3PF12405AB

Spark Plug

SPARK PLUG




80

0.56 lbs.


fax: 1-800-511-0516


1-800-657-4343


Dim./Info: CHAMPION N5C MEDIUM/HOT TYPE PLUG 14MM THREAD 3/4" REACH 13/16" HEX SHOULDER


Ford A-4012405C

0.17 lbs.

Spark Plug


A-D16

Champion Spark Plug

Dim./Info: CHAMPION D16 18MM THREAD 1/2" REACH 7/8" HEX SHOULDER

Dim./Info: 18MM THREAD 1/2" REACH 7/8" HEX SHOULDER For Models: ALL MODELS


A-405

0.17 lbs.

Sold In Multiples Of 6

Spark Plugs (Autolite)

0.56 lbs.

Replaces: C3PF12405AB

A-CJ8

0 lbs.

Champion Spark Plug

Sold In Multiples Of 8

Dim./Info: 14MM THREAD 3/8" REACH 3/4" HEX SHOULDER

Sold 4 Per Package

A-CPN12259

Spark Plug Wire Set (4 Cyl)

0.88 lbs.

For Models: (2000, 3000, 4000, 5000, 7000 ALL SERIES)

A-H12

Champion Spark Plug 0.13 lbs. For 4 Cylinder Gas Models 1950-1964 Using Unleaded Fuel. (Sold In Multiples Of 8)

Dim./Info: 14MM THREAD 7/16" REACH 13/16" HEX SHOULDER

For Models: NAA, NAB, 2030, 2120, 2130, 2131, 4030, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, (2000, 4000 ALL )

A-21A884

Tune Up Kit (Champion) Kit Contains C5AF12171C Point Set, C5NF12300A Condenser, C5NF12200A Rotor & (4) Champion N5C Spark Plugs.

0.7 lbs.

For Models: (2000, 3000, 4000, 5000 ALL 1965>), (2600, 3600, 4600, 5600, 6600 ALL 1975>)

A-21A886

Tune Up Kit 0.75 lbs. Contains poin set, condenser, rotor & (4)RH18YChampion Spark Plugs


A-21A984

Tune Up Kit (Autolite) Kit Contains C5AF12171C Point Set, C5NF12300A Condenser, C5NF12200A Rotor & (4) 405 Autolite Spark Plugs.

0.7 lbs.

For Models: (2N, 8N, 9N ALL W/ FRONT MOUNT DISTRIBUTORS)

A-309786

Tune Up Kit Contains Point Set, Condenser, Rotor, & (4) 437 Autolite Plugs

0.9 lbs. For Models: (2000, 3000, 4000, 5000 ALL 1965>), (2600, 3600, 4600, 5600, 6600 ALL 1975>)

A-C5AF12171C

POINT SET

0.1 lbs.

For Models: (2N, 8N, 9N ALL W/ Front Mount Dist.)

A-21A887

Tune Up Kit 0.7 lbs. Kit contains point set, condenser, rotor & (4) H10Champion Spark plugs

For Models: 2000 1965 & Up, 2600 1975 & Up, 3000 1965 & Up, 3600 1975 & Up, 4000 1965 & Up, (4100, 4600 ALL 1975 & Up), 5000 1965 & Up, (5600, 6600 ALL 1975 & Up)

A-21A164

POINT SET

0.05 lbs.

For Models: 8N W/ SIDE MOUNT DISTRIBUTOR, ALL MODELS 4 CYL GAS (1950-64) For Models: FITS SEVERAL MODELS W/ K141, K161, K181, K241, K301, K321, K341, K361

82

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-21A888


Ford A-9825042

0.09 lbs.

Tune Up Kit

A-9N12024

1.58 lbs.

Coil (6 Volt)

Dim./Info: 6 Volt

For Models: 2000, 2600, 3000, 3600, 4000, 4100, 4600, 5600, 5000 1965 >, 6600 1975 >

A-A0NN12300A

0.01 lbs.

Condensor

For Models: (2N, 8N, 9N ALL W/ FRONT MOUNT DISTRIBUTOR)

A-9N1202412

1.55 lbs.

Coil (12 Volt)


0.01 lbs.

Condenser

For Models: (2N, 8N, 9N ALL SN ), (2600, 3600, 4600, 5600, 6600 ALL 1975>)


A-B2NN12200A

A-C7NN10505D

Rotor

Dim./Info: 11 Amp.

For Models: 2000, 3000, 4000, 5000, 7000

0.01 lbs.

For Models: 8N LATE MODELS W/ SIDE MOUNTED DISTRIBUTOR, (NAA, 600, 700, 800, 900 ALL W/ SIDE MOUNTED DISTRIBUTOR), (2000, 4000 ALL 1950-1964 W/ SIDE MOUNTED DISTRIBUTOR)

A&I PRODUCTS

1.49 lbs.

Control Box

0.01 lbs.

Rotor


A-C0NN12200A

1.4 lbs.

Coil (12 Volt)

fax: 1-800-511-0516

A-E27N10505F

Control Box



A-FET12300A

1.05 lbs.

For Models: DEXTA, MAJOR, POWER MAJOR, SUPER DEXTA, SUPER MAJOR


1-800-657-4343

83


Ford A-NCA12106A

Distributor Cap

0.36 lbs.

For Models: 8N LATE MODEL W/ SIDE MOUNT DISTRIBUTOR, (NAA, 600, 700, 800, 900 ALL W/ SIDE MOUNT DISTRIBUTOR), (2000, 4000 ALL 1950-64 W/ SIDE MOUNT DISTRIBUTOR)

A-9N12106C

Distributor Cap

0.25 lbs.

A-21A309F

Electronic Ignition Module 0.2 lbs. Models W/ 12 Volt Neg. Ground Or 6 Volt Systems Converted To 12 Volt Negative Ground Systems Only.

Dim./Info: Replaces Points And Condenser With An Electronic Module. Increases Spark Plug Life And Horsepower,Improves Fuel Economy.Easy To Install, No Complicated Wiring, Fits Entirely Inside Distributor. For Models: NAA, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, 8N SN863244>

Distributor Cap

0.36 lbs.

A-E1NN9A436AA

Heater Plug

0.14 lbs.

For Models: FITS SEVERAL MODELS For Models: (2000, 3000, 4000, 5000 ALL 1965> W/ 3 CYL. ENGINE), (2600, 3600, 4600, 5600, 6600 ALL 1975> W/ 3 CYL. ENGINE)

A-9N12143

Gasket, Distributor Base


A-87055S92

O-Ring, Distributor Base To Cyl. Block

A-8N3679C

0.02 lbs.

0.1 lbs.

Sold 4 Pcs./Bag

0.01 lbs.

Point Set

For Models: TW10, TW20, TW30, 6000, 650, 6500, 750, 7500

0.01 lbs.

Point Set

A-C5NE9A436A

Thermostart Intake Manifold Heater DIESEL Cold Weather Starting Aid

For Models: (2000, 4000 ALL )


1-800-657-4343

85


Ford A-310061

Sealed Beam Bulb (6 Volt)

0.68 lbs.

A-E0NN13N007AA


Dim./Info: 5 3/4" DIAMETER 2 SCREW TERMINAL (4019)

Dim./Info: 4 1/2" DIAMETER 3 SCREW TERMINAL (4460X)


A-28A11


Sealed Beam Headlamp (6 Volt)

0.8 lbs.

A-310062


Dim./Info: RUBBER BODY ADJUSTABLE MTG. BRACKET For Models: ALL MODELS

0.52 lbs.

A-310066

Sealed Beam Headlamp (6 Volt)

Dim./Info: 5 7/8" DIA. (4019)

For Models: NAA, NAB, 2N, 600, 700, 8N, 800, 9N, 900, (2000, 4000 ALL ), (2600, 3600, 4600 ALL 1975>)

A-194355

Hyd. pump drive shaft


A-9N649A

Bushing, Hydraulic Pump PTO Shaft

0.29 lbs.

Hyd. Pump Drive Coupler

0.36 lbs.

pumps: hyd / main / power steering


Power Steering Pump Repair Kit

1.6 lbs.

Dim./Info: 13.06" long 6 spline .750" shaft .187" keyway

For Models: 231, 233, 2600, (3500, 3550 ALL 5/1970-1975), 3600, 4100 4/1970-1975, (420, 4600 ALL 1975-1981), 4600SU, 5100 7/19701975, (5600, 6600 ALL 1975-1981), 7100 7/1970-1975, 7600 1975-1981

A-DHPN3A674B



1.1 lbs.

A-L36-4

Dim./Info: 9.19" long 6 spline 3/4" shaft

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

91


Ford For Models: 4000, 5000, 7000

For Models: 302 (SERIES MORFLEX COUPLER)

A-54C1067

Hyd. pump coupler (chain type)

0.88 lbs.

Dim./Info: 1" Bore Dia. / 6 Spline 16 Tooth / #40 Chain Sprocket

For Models: (SHERMAN LOADER PUMP DRIVE: 54B, 54C)

Hyd. pump hub Used w/190760 pump shaft

0.8 lbs.


A-7707570

0.8 lbs.

Hyd. pump shaft coupler Used w/292222, 7701044, 291951 pump shafts

A-192161

Hyd. pump hub Used w/194354 pump shaft & 192160 sheave

Dim./Info: 13 Spline 1.375" O.D. 3.000" Long

1.1 lbs.

Dim./Info: 3.375" Dia. 6 Spline

For Models: 730

A-192160

Hyd. pump sheave Sheave has 7/16" front recess to accommodate hub

2.52 lbs.

A-192164

Bushing Insert

0.01 lbs.


A-54C2055

Dim./Info: 5.000" Dia. 1.185" Dia. W/ Threaded Holes

Hyd. pump hub Used w/194354 or 194355 pump shafts

1.1 lbs.

Dim./Info: 6 Spline W/ 4 Rubber Bushings


A-192152

Hyd. pump sheave

2.84 lbs.

Dim./Info: 5.000" Dia. 1.187" Dia. W/ Rubber Bushings

A-190753

For Models: SHERMAN 54 SERIES LOADER

A-290421

1 lbs.

Hyd. pump hub Used w/195454 pump shaft

Rubber Grommet

0.01 lbs.

Hydraulic Pump Cam Block

0.6 lbs.



A-9N617A

For Models: 701, 702, 703, 713, 723

A-C5NNN879A

Hyd. Pump Hub Used W/ 291951, 292222 & 7701044 Pump Shafts

2.3 lbs.

Dim./Info: 13 Spline For Models: 2N, 8N, 9N

A-9N615

Hydraulic Pump Piston

1 lbs. For Models: 335, 340, 340A, 340B, 3400, 4400, 515, 532, 535, 540, 545, 730

A-291061

Hyd. Pump Hub Used W/ 291951, 292222 & 7701044 Pump Shafts


A-C5NN866A


0.69 lbs.

Drive Gear

1.04 lbs.

For Models: 730

92

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-191196


Ford A-291315

2.6 lbs.

Hyd. pump hub Used w/291951, 292222 & 7701044 pump shafts

A-L78-13

Hyd. Pump Drive Flange Optional Drive Flange For Morflex Series 352 Coupler

Dim./Info: 13 Spline 7/16" -14 Threaded Holes

0.48 lbs.

Dim./Info: 13 SPLINE FOR 7/8" SHAFT 5/16" DIA. BOLT HOLES ON 2 1/4" CENTERS For Models: 352 SERIES MORFLEX COUPLER

For Models: 730

A-192199

A-86509732

0.4 lbs.

Dim./Info: 3/4" ROUND BORE 1/4" X 3/8" SET SCREW


For Models: 352 SERIES MORFLEX COUPLER

A-D8NN600DA

Hydraulic Pump (22 gpm)

15.46 lbs.

For Models: SEVERAL

A-L36-19

0.4 lbs.

Hyd. Pump Drive Flange Optional Drive Flange For Morflex Series 352 Couplers

Dim./Info: 1" ROUND BORE 1/4" X 3/8" SET SCREW

For Models: 340, 340A, 340B, 445, 445A, 450, 540A, 540B

A-D8NN600AA

Hydraulic Pump (26.6 gpm)

17.06 lbs.


A-191061

Hyd. Pump Drive Flange

0.34 lbs.

Dim./Info: 3/4" ROUND BORE For Models: 445, 540, 545A, 550, 555

For Models: (SERIES MORFLEX COUPLER: 302)

A-L36-5

Hyd. Pump Drive Flange

0.28 lbs.

Dim./Info: 7/8" ROUND BORE

A-770242529Z

Hydraulic Gear Pump W/ Adaptor 16 lbs. Ports Located On Side Of Rear Housing (Inlet Port 1 5/8" -Outlet Port 1 5/16"). A-50P027LBASB HYDRAULIC PUMP W/O ADAPTER 15.24 lbs. This does not include the adapter

Dim./Info: 21.5 GPM @ 2100 RPM 2200 PSI LEFT HAND ROTATION 2 BOLT MOUNT 7/8" DIA. 13 TOOTH SHAFT


A-L36-6


0.05 lbs.



A-43A29

Hydraulic Adaptor 1 5/16"ORB Male X 1 3/16"ORB Female.


A-L36-8



0.54 lbs.

0.5 lbs.


RUBBER BLOCK 0.04 lbs. Used In 290421, 291061, C5NNN879A & D90883 Hyd. Pump Hubs.

Hyd Pump Drive Flange Drive Flange For Morflex Series 352 Coupler



A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

93


Ford A-D6NN600A

Hydraulic Pump

29.7 lbs.

A-D8NN600LB

Hydraulic Pump For models Less Syncro Trans. A-D8NN600LB-E Hydraulic Pump (Economy)

15.2 lbs. 15.16 lbs.

For Models: 230A, 231, 2310, 233, 2600, 2610, 2910, 333, 335, 3600, 3910, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535 Hydraulic Pump

12.6 lbs.

For Models: 3230, 340, 3400, 3430, 345C, 345D, 3550, 3930, 4110, 420, 4400, 4410, 4500, 4600, 4610, 4630, 515, 535, 540, 545

A-D1NN600B

Hydraulic Pump

12 lbs.

Replaces: D1NN600C

For Models: (2810, 2910 ALL 4/83>), 3230, 340A, 340B, 3430, 345C, 345D, 3910 4/83>, 3930, 4110 4/83>, 4130, 445, 445A, 445C, 445D, 450, 4610, 4630, 4830, 5030, 540, 540A, 540B, 545, 545A, 545C, 545D

A-5129488

Hydraulic Pump

6.1 lbs.

Replaces: 1909916, 1930226, 5120850, 5169770, 5113283

For Models: 4000, 4500, 535, 550

A-E1NN600EA

Hydraulic Pump

18.7 lbs.

Dim./Info: 42 LITRES/MIN

For Models: (5110, 5610, 6610, 6810, 7410, 7610, 7710 ALL AUSTRALIA) For Models: TK76, TK85, TK85M, 4010S, 5010S, 7530, (766DT, 980 ALL OPTIONAL - OVERSIZE PUMP), 700 W/ LOADER

A-5129486

Hydraulic Pump

A-F0NN600BB

Hydraulic Pump (Tandem Gear)

24.5 lbs.

5.54 lbs.

Replaces: 517928, 8282886

For Models: 5640, 6640, 7740, 7840, 8240, 8340

A-D0NN600F A-D0NN600F-E

For Models: (4635, 4835 ALL W/ Bosch Type Pump)

A-C7NN600Y

Hydraulic Pump

Pump, mounts in trans. housing. Hydraulic Pump (Economy)

13.34 lbs. 13.37 lbs.

29.4 lbs.

For Models: (3550, 4000 ALL 1965>) For Models: 3000, 4000

A-D2NN600B A-E9NN600BC

Hydraulic Pump

14.8 lbs.

Pump, main hydraulic

13.68 lbs.

for models w/ dual power.

For Models: (3230, 3430, 3930, 4630, 5030 ALL W/ SYNCRO TRANS)

94

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-E2NN600AB


Ford A-D8NN600KB

For Models: 5100, 5200, 7100, 7200

Pump, mounts in trans. housing.

16.2 lbs.

Replaces: D8NN600KA

A-5129483

Hydraulic Pump

6.77 lbs.

Replaces: 5179719, 1930068, 5120849, 8282339, 1901324, 1930052, 1930057, 5120297, 8280127, 5169772, 5113284

does not have a spin-on filter base on pump A-D8NN600KB-E Hydraulic Pump (Economy)

16.2 lbs.

Dim./Info: 31 LITRES/MIN


A-D0NN600G

Pump, mounts in trans. housing. for models w/o dual power. A-D0NN600G-E Hydraulic Pump (Economy)

For Models: 5600, 5700, 6600, 6700, 7600, 7700

8.95 lbs. 8.9 lbs.

For Models: (5000, 5100, 5200, 7000, 7100, 7200 ALL 65-75)

A-D5NN600C A-D5NN600C-E

Pump, mounts in trans. housing. Hydraulic Pump (Economy) This Pump Is The Economy Version Of D5NN600C

11.25 lbs. 11.18 lbs.

A-E0NN600AC

Pump, mounts in trans. housing

19.1 lbs.

Hydraulic Pump (Economy)

19.1 lbs.

uses a spin-on filter

A-E0NN600AC-E

For Models: 5100, 5600, 5610, 6600, 6610, 6700, 6710, 7100, 7600, 7610, 7700, 7710, 7910, 8210

A-E2NN600BA

Pump, mounts in trans. housing

15.2 lbs.

Dim./Info: 20 GPM

Dim./Info: 16GPM

For Models: TW30, TW35

A-E1NN600AA

For Models: (8000, 8600, 8700, 9000, 9600, 9700 ALL 68-78)

A-D8NN600FA A-D8NN600FA-E

Pump, mounts in trans. housing. Hydraulic Pump (Economy) This Pump Is An Economy Version Of D8NN600FA

Pump, mounts on engine.

13.42 lbs.

Replaces: E1NN600AB

13.8 lbs. 13.8 lbs.

Has spin on oil filter base.

A-E1NN600AA-E

Hydraulic Pump (Economy) This Pump Is The Economy Version Of E1NN600AA

13.42 lbs.

Dim./Info: 16 GPM

For Models: TW15, TW25, TW5, (TW10, TW20 ALL 79-82) For Models: TW15, TW25, TW35, TW5, 2310, 2600, 2610, 3600, 3610, 5610, 6610, 6710, 7610, 7710, 7910, 8210

A-9N621

Hydraulic Pump Valve Chamber Assy. (RH)


For Models: TK76, TK85, TK85M, 3010S, 3435, 3435, 3830, 4010S, 4030, 4230, 4330V, 4430, 5010S, 5530, 6530, 7530, 766DT, 980 SN 708863>

5.24 lbs.


A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

95


Ford A-9N622

Hydraulic Pump Valve Chamber Assy. (LH)

4.99 lbs.

A-E0NND960AA

Selector Valve

8.77 lbs.

Replaces: C5NND960C, C5NND960D


A-CODW4621A

0.3 lbs.

For Models: (2000, 3000, 4000 ALL 1965>), (2600, 3600, 4600 ALL 1975>)

A-D5NN1202A

Bearing Cup, Hyd. Pump Shaft Used W/ NCA966E Pump Shaft

For Models: 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 5000, 5100, 5200, 530A, 531, 5340, 7000, 7100, 7200, (3230, 3430, 3930, 4130, 4830, 5030 ALL W/O CAB), (2000, 4000 ALL 1965>)

A-8N638

Hydraulic Pump Safety Valve Assy.

0.8 lbs.

0.17 lbs.


A-C7NN638E

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL ), 5000, 7000

A-C5NNN660A For Models: FITS SEVERAL MODELS W/ Piston Type Pump

A-D5NN1201A

Bearing Cone, Hyd. Pump Shaft Used W/ NCA966E Pump Shaft

0.29 lbs.

Drive Gear, Hyd Pump Front 0.51 lbs. Used in D0NN600F, D0NN600G, & D2NN600B Hydraulic Pumps

For Models: 3550, (5000, 5100, 5200, 7000, 7100, 7200 ALL 1965-75), 4000 1965>

A-CKPN600A

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL ), (2600, 3600, 4600 ALL 1975>), (2610, 3610, 3910, 4110, 4610 ALL 1981-4/83)

A-VPK2205

Hydraulic Pump Repair Kit

0.7 lbs.

Hyd Valve Assembly 0.16 lbs. Includes: housing, pintle, spring, pin clip, fully assembled.

For Models: 9N FOR 9N600 PUMP ASSY., 2N 39-47, FOR 9N600 PUMP ASSY.

A-E1ADDN984

1.24 lbs.

Dim./Info: For Models Less Independent PTO

0.07 lbs.

For Models: (2000, 3000, 4000 ALL 1965> W/ C5NN966A HYD. PUMP SHAFT), (2600, 3600, 4600 ALL 1975> W/ C5NN966A HYD. PUMP SHAFT)

A-9N640

Hyd Repair Kit

Safety Valve, Hyd. Pump

For Models: 4000 1965>

0.41 lbs.

For Models: 4000, 5000, 7000, (MAJOR, SUPER MAJOR ALL 1952-64)

96

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



Bearing Cone, Hyd. Pump Shaft Used W/ C5NN966A Hydraulic Pump Shaft


Ford A-CCPN600AB

1 lbs.

Hydraulic Pump Repair Kit

For Models: 600, 700, 800, 900, (2000, 4000 ALL ), (3230, 3430, 3930, 4130, 4630, 4830 ALL 3/1990>)

For Models: (2000, 3000, 4110 ALL 1/65-11/66)

A-F2NN2218AA

2.5 lbs.

(4) Brake Shoes, Drum Type sold in lots of 4, priced per shoe.

For Models: 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3600, 3600N, 3600N0, 3600V, 3610, 530A, 531, 3500 EXC, 4110 12\66

A-C7NN2218A

(4) Brake Shoes, Drum Type 3.22 lbs. Sold in lots of 4, priced per shoe. Note: This shoe is .500" wider than the standard shoe A-D9NN2218AA. It fits the standard brake drum.

A-80180001

ACTUATOR SPRING

0.02 lbs.

Replaces: 180001, C5NN2N320A, 81802542

For Models: 335, 3900, 4000, 4100, 420, 4600, 5000, 5030, 515, 535, 550, 555, 555A, 555B, 5600, 5640, 655, 655A, 6600, 6640, 6700, 7000, 7600, 7700, 7740, 7840, 8240, 8340, (2810, 2910, 3230, 3430, 3910, 3930, 4110, 4130, 4610, 4630, 4830 ALL < 1/90), (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210 ALL < 6/88), (555C, 655C ALL 1/88 >), 3930H 1/90 >, SEVERAL OTHER

A-8N7037B

Gasket, Trans. Filter Plug

0.01 lbs.


A-D5NN2N141A

Actuator Ball

0.1 lbs.

clutch / trans. / diff. / rear axle

For Models: 2000, 2000 SERIES, 3000, 3000 SERIES, 4000, 4000 SERIES

For Models: 3500

A-86533415

Brake Drum

27.54 lbs.

For Models: 2810, 2910, 335, 3900, 4000, 420, 4600, 5000, 515, 532, 535, 550, 555, 555A, 555B, 5600, 5610, 5900, 655, 655A, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, SUPER MAJOR 11/1960>, (555C, 655C ALL 11/1988>), (3910, 4110, 4610 ALL 1981-2/1990), (3230, 3430, 3930, 4130, 4630, 4830 ALL 3/1990>)

For Models: (2000, 4110 ALL L/ Differential Lock 1965 Thru 3/1968), (600, 700, 800, 900 ALL 1955>)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

101


Ford A-86576339

Brake Rod Seal

0.12 lbs.

Replaces: C5NN2N336A, E7NN2N336AA, 85999093

A-E6NN2N315AA

Brake Disc

1.34 lbs.


Dim./Info: 8.976" OD & 5.000" ID

For Models: (7100, 7200 ALL 65-75), (6600, 6700, 750, 7500, 7600, 7700 ALL 75-80), (6610, 6710, 7610, 7710, 7910 ALL 81>)

A-D9NN2N289AA

Seal, Brake Pedal Shaft

For Models: 5100, 5200, 5600, 5610, 5640, 6640, 6700, 6710, 7100, 7200, 7600, 7600C, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340

0.04 lbs.

A-E9NN2A097BA

Replaces: C5NN2N258C, D2NN2N258A

Brake Disc

2.18 lbs.

Dim./Info: 8.819" OD & 2.086" ID For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710

A-D5NN2N625A

Handbrake Disc

0.71 lbs.

Dim./Info: 4" OD 1.22" MAJOR/ 1.125" MINOR ID 0.498" WIDTH 23 TEETH

A-C5NN2N315B

1.82 lbs.

Brake Disc

Steel Brake Plate

1.16 lbs.

Dim./Info: 8.228" OD & 4.488" ID

For Models: (2000, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 ALL W/ TRANSMISSION HANDBRAKE)

A-83999753

For Models: 5100, 5200, 5600, 5610, 5700, 5900, 6410, 6600, 6600C, 6610, 6700, 6710, 7100, 7200, 7600, 7600C, 7700, 7710, 7810, 7910, 8210

For Models: 2810, 2910, 3100, 3900, 3910, 4110, 4600, 4610

A-C7NN2N317A

Brake Actuating Assy.

16.44 lbs.

Replaces: C5NN2A097B

Dim./Info: 8.070" OD .750" facing

For Models: 2100, 2600, 2610, 2810, 2910, 3055, 3100, 335, 340, 3400, 345C, 345D, 3550, 3600, 3610, 3900, 3910, 4110, 4140, 420, 4400, 4410, 445C, 445D, 450, 4500, 455C, 4600, 4610, 515, 532, 540, 545, 545C, 545D, 550, 555, 555A, 555B

A-E9NN2A097AA

For Models: 5100, 5200, 5600, 5610, 5700, 5900, 6410, 6600, 6600C, 6610, 6700, 6710, 7100, 7200, 7600, 7600C, 7700, 7710, 7810, 7910, 8210

A-C5NNP743B

Disc, PTO Clutch, Internal Splines

Dim./Info: 5.25" OD 3.850" MAJOR/ 3.665" MINOR ID 0.082" WIDTH 45 TEETH

1.72 lbs.

Brake Disc

0.2 lbs.

Dim./Info: 8.070" OD X 2.086" ID 1.125" facing For Models: 4000, 4600

A-E0NNP743AA

Disc, PTO Clutch

For Models: 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5030

0.2 lbs.

Dim./Info: 5.25" OD 3.850" MAJOR/ 3.665" MINOR ID 0.080" WIDTH 45 TEETH

For Models: (4110, 4610 ALL W/INDEPENDENT PTO)

102

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



Replaces: C7NN2A097B, C5NN2A097A


Ford A-C0NN7B164A

FRICTION DISC - INT SPLIN

0.16 lbs.

A-8N7100

6.9 lbs.

1st Gear

Replaces: 81804831

For Models: (550, 555, 555A, 555B, 655, 655A ALL 1/75-2/81)

A-D8NNP743JA

Dual Power Disc.

0.24 lbs.

Replaces: D1NNP743A, C9NNP743A

A-C5NN7100A

Dim./Info: 49 / 28 Tooth 1.775" I.D. 7.125" O.D.

For Models: TW10, TW20, TW30, 5100, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6600C, 6610, 6640, 6700, 6710, 7100, 7200, 7600, 7600C, 7610, 7700, 7710, 7740, 8000, 8700, 9700

A-C8AP7B442A

PTO Clutch Plate, External Splines

7.1 lbs.

1st Gear

0.22 lbs.

Replaces: 1P77573A

Dim./Info: 5.47" MAJOR/ 5.278" MINOR OD 3.91" ID 0.070" WIDTH 54 TEETH

For Models: 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500

A-E6NN7N100AA

1 st Gear, Transmission

7.07 lbs.

Replaces: C5NN7N10C

Dim./Info: 46 & 28 tooth

For Models: (4000, 4110, 4600, 4610 ALL W/IND. PTO)

A-PBB77573A

PTO Steel Plate

0.26 lbs.

Replaces: D6NNC730A

For Models: 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710

Dim./Info: 6.062" OD & 4.448" ID 60 tooth

A-C5NN7N100A

Dim./Info: 49 & 28 TEETH

For Models: TW10, TW20, TW30, 5100, 5600, 5610, 5640, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 7100, 7200, 7600, 7600C, 7610, 7700, 7710, 7740, 8000, 8340, 8700, 9700

A-D8NNP743JA

Dual Power Disc.

0.24 lbs. For Models: 5000 W/8SP TRANS.

Replaces: D1NNP743A, C9NNP743A

Dim./Info: 5.826" OD & 4.212" ID 5.826" OD & 4.212" ID

A-B9NN7A381B

1st & 3rd Gear

Trans. Gear (2nd)

7.1 lbs.

Dim./Info: 56 TOOTH 17 SPLINES

For Models: TW10, TW20, TW30, 5100, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6600C, 6610, 6640, 6700, 6710, 7100, 7200, 7600, 7600C, 7610, 7700, 7710, 7740, 8000, 8700, 9700

A-957E7100C

7.68 lbs.

1st Gear



Dim./Info: 5.826" OD & 4.212" ID 5.826" OD & 4.212" ID

For Models: 4000 , (7100, 7200 ALL 1/1/1973), 7600, 7610, 7700, 7710,

A-E6NN7N101BA

4.04 lbs.

Dim./Info: 28 TEETH & 35 TEETH

5.74 lbs.

Dim./Info: 43/28 teeth 1 13/16" I.D.

A-E6NN7N101BA

4.04 lbs.

Replaces: C9NN7N315B

For Models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710

A-C5NN7141A

Gear, Reverse Idler

3.82 lbs.

Dim./Info: 33 TEETH

6.03 lbs.

2nd Gear

For Models: (2000, 3000, 3600, 3610 ALL W/8SP TRANS.)

Dim./Info: 43 & 28 tooth 2.00" I.D. 6.500" O.D.

A-C5NN7141B

Gear, Reverse Idler

3.56 lbs.

Dim./Info: 31 TEETH

For Models: 2810, 2910, 3910, 4110, 4600, 4610, 5000, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7610, 7710, 7740, 7840, 8010 For Models: (2000, 3000, 3600, 3610 ALL W/8SP TRANS)

104

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



2nd & 5th Gear

3.82 lbs.


2.6 lbs.

For Models: (1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB ALL W/ 4 Speed Transmission)

A-957E7101B

Gear, 3rd Assy


Ford A-C5NN7K013B

3.56 lbs.

Gear, Reverse


Fork, 2nd & 6th Gear

For Models: 5000, 5100, 5200, 5500, 5600, 5610, 6600, 6610, 6700, 7100, 7200, 7600, 7610, 7700

3.9 lbs.

Gear, Reverse

Replaces: C5NN7K013A

A-C5NN7N072B

Gear Shift Connector & Coupling

For Models: (2000, 3000, 4000 ALL W/8SP TRANS. 9/65>)

For Models: (5000, 5600, 5610, 5700, 6600, 6610, 6700 ALL W/8SP TRANS.)

3.4 lbs.

Gear, Reverse

A-B9NN7114A

Countershaft, 2nd Speed Gear

1.06 lbs.


For Models: (3000, 4000, 5000, 7000 ALL W/8SP TRANS 65/9-65)

A-E6NN7N072AA

Front Gear Shift Coupler

For Models: (NAA, 8N ALL W/ 4 Speed Trans.)

2.42 lbs.

A-NAA7111C

Transmission Countershaft

Dim./Info: 28 teeth, 17 splines

8.7 lbs.

Dim./Info: 23 / 16 / 16 / 15 / 15 Tooth 12.420" Long For Models: NAA

A-8N7111

Rear Gear Shift Coupler

7.9 lbs.

Dim./Info: 23 / 15 / 15 / 10 Tooth 11.910" Long

For Models: 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740

A-E6NN7N072BA


For Models: 8N 1948-1952

2.2 lbs.

A-957E7017C

Transmission Drive Shaft

Dim./Info: 28 teeth, 20 splines

4.75 lbs.

Dim./Info: 17 Tooth 15 Spline 16.500" Long For Models: DEXTA, SUPER DEXTA

For Models: 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740

A-957E7061E

Transmission Mainshaft

10.12 lbs.



2.2 lbs.

Dim./Info: 28 TEETH 20 SPLINES


A-C5NN7N012A

1.26 lbs.

Replaces: C5NN7231B

For Models: (2000, 3000, 4000 ALL W/ 6SP TRANS.)

A-C5NN7K013E

A-E8NN7231AA

Dim./Info: 28 / 28 Tooth 17 Spline 11.875" Long

For Models: DEXTA

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

105


Ford A-960E7061A

Transmission Mainshaft

10.06 lbs.

A-C5NN7113G

11.26 lbs.

Gear, Countershaft


Dim./Info: 24 MIDDLE TEETH 57 OD TEETH 26 SPLINE

For Models: (2000, 3000, 4000 ALL W/6SP TRANS.) For Models: SUPER DEXTA, 2000, 2110, 2120, 231, 2600, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 Transmission Countershaft


For Models: (2000, 3000, 4000, 600, 700, 800, 900 ALL W/ 4 SPEED TRANSMISSION) Trans. Countershaft

A-C5NN7113J

Dim./Info: 30 MIDDLE TEETH 46 OD TEETH 26 SPLINE For Models: (2810, 2910, 3550, 3910, 4000, 4610 ALL W/8SP TRANS.)

A-C5NN7113B

Gear, Countershaft Secondary

For Models: (2000, 3000, 3600, 3610 ALL W/8SP TRANS., W/TRANS. PTO, 9/65 / UP) Trans. Countershaft

For Models: (3000, 3600, 3610 ALL W/8SP TRANS.)

A-C9NN7113B

Gear, Countershaft Secondary

For Models: (2000, 3000, 4000 ALL W/LIVE PTO / 8SP TRANS. 9/65 / UP) Trans. Countershaft Gear

9.92 lbs.

Dim./Info: 35 TEETH 16 SPLINE

7.84 lbs.


A-D1NN791A

9.24 lbs.

Gear, Trans.

8.06 lbs.

Dim./Info: 16 TEETH 18 TEETH 26 TEETH 23 ID SPLINES

A-C5NN7111N

12.32 lbs.

Dim./Info: 30 ID TEETH 56 OD TEETH 26 ID INTERNAL SPLINE

8.7 lbs.

Dim./Info: 16 / 15 Spline 15 / 18 / 23 Tooth 12.875" Long

A-C5NN7111M

Gear, Countershaft Main

9.9 lbs.

Dim./Info: 35 TEETH 16 SPLINE

8.38 lbs.

Dim./Info: 50 TEETH 11 SPLINES For Models: (5000, 5600, 5610, 5700, 6600, 6610, 6700 ALL W/8SP TRANS.)

A-C5NN7017H For Models: 2810, 2910, 3230, 3430, 3910, 3930, 4000, 4110, 4130, 4600, 4610, 4830

A-C5NN7113A

Gear, Countershaft

Dim./Info: 37 TEETH 16 & 20 SPLNES

5.19 lbs.

Shaft, Trans. Main

Dim./Info: 17 Tooth 15 Spline 17.675" Long

11.4 lbs. For Models: 2000 W/6SP UK, 7SP TRANS.

A-C5NN7C094B

Shaft, Main

11.2 lbs.

Dim./Info: 30 TEETH 16 & 18 SPLINES

For Models: (2000, 3000, 4000 ALL W/6SP TRANS.)

For Models: (2000, 3000, 4000, 5000 ALL SELECT-O-SPEED #2 / 3 CLUTCH)

106

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-C5NN7N109A

A-C5NN7113D


Ford A-C5NN7C095D

Shaft, Trans. Main (Rear)

10.52 lbs.


A-C5NN7017A

4.88 lbs.

Trans. Input shaft

Dim./Info: 19.125" long 20 / 25 SPLINES For Models: (5000, 5100, 5600, 6600, 6700, 7100, 7200, 7600, 7700 ALL W/O DUAL POWER)


A-957E7111D Main Trans. Shaft 10.94 lbs. Used Only W/ 3rd Speed Gear Part# E9NN7N315AA (Straight Tooth), Not Available From A & I Products.


Dim./Info: 16 / 16 Tooth 22 / 26 Spline 10.125" Long For Models: DEXTA, SUPER DEXTA

A-E6NN7111AA

A-E7NN7C094AA

Shaft, Trans. Main

Trans. Countershaft

When Replacing C9NN7111B Cntr. Shaft, Also Order D0NN7N048A, D0NN7N047A & E6NN7N071BA NA From A & I

10.9 lbs.

Dim./Info: 11.750" long 28 & 30 tooth 20 & 17 spline


For Models: (5000, 5600, 5700, 6600, 6700 ALL W/8SP TRANS. (INDEPENDENT PTO / DUAL POWER))

A-C5NN7C094A

Shaft, Trans. Main

10.26 lbs.


10.7 lbs.

Dim./Info: 28 / 30 Tooth 17 / 20 Spline 11.750" Long

For Models: 5000 W/8SP TRANS.

For Models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710

A-E0NN7017HA

Trans. Shaft L/ Dual Power Has Seal Flange 1.72" From End Of Shaft.

6.16 lbs.

Trans. Shaft L/ Dual Power Has Seal Flange 1.46" From End Of Shaft

6.78 lbs.

Dim./Info: 10 Teeth / 20 Teeth 19.22" Long For Models: (6640, 7740, 7840, 8240 ALL L/ Dual Power), 8010 SN 800001M> L/ Dual Power, 7010 SN 850001M> L/ Dual Power, 7810 2/1988> L/ Dual Power, (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710 ALL 5/1984> L/ Dual Power)

fax: 1-800-511-0516

A-C7NN7017AB

Trans. Input Shaft

5.28 lbs.

Dim./Info: 17.750" long 10 spline, 19 tooth For Models: 2100, 2110, 2300, 3000, 3100, 3120, 3190, 3310, 3400, 3600, 3610, 4110

Dim./Info: 10 TEETH/20 TEETH 19.22" Long For Models: (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710 ALL 1959>) For Models: 2120, 4120, 600, 800

110

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: 2120, 4120, 600, 800


Ford A-8N1171

5.2 lbs.

Hub & Stud, Rear Axle

A-960E4621

Differential Rear Pinion Cone

1.4 lbs.

For Models: (2000, 3000, 4110 ALL 1965>), DEXTA 4/1962 - 1964

A-BB4616B

Differential Pinion Front Cup

0.9 lbs.

For Models: NAA, NAB, 8N

A-8N4235C

24 lbs.

Shaft, Rear Axle

For Models: (2N, 8N, 9N ALL 1939-52), NAA 1953-54, DEXTA 1957-4/1962



Nut & Ring, Rear Axle

0.36 lbs.

A-NAA4676A

Differential Pinion Seal

0.06 lbs.

For Models: NAA 1953-1954 A-8N4293 A-8N4187

Washer, Rear Axle Ring, Rear Axle

0.02 lbs. 0.01 lbs.

A-81T4625MA2

Differential Pinion Pilot Bearing

0.61 lbs.

For Models: 8N 48-53, NAA 53-55

A-2N4221

Bearing, Rear Axle Shaft

1.27 lbs.

For Models: 600 W/4 SP.TRANS. SN - 1960-64), NAA 1953-1954

For Models: NAA, 8N, 9N 1937-47, 2N 1947-47

A-9N4130

REAR AXLE HOUSING GASKET

0.08 lbs.

A-BB4221B

Differential Pinion Bearing Cone

1.53 lbs.

Sold in Qty of 10

For Models: 600 W/4 SP. TRANS. SN - 1960-64, (2N, 8N, 9N ALL 1939-52), NAA 1953-54, DEXTA 1957-1964, (2000, 3000, 4110 ALL 1965>)


A-312356

Differential Pinion Seal

0.06 lbs.

For Models: 600 W/4 SP. TRANS. SN), 5 SP. SN106115> (1959>))

A-BB4625B

Differential Pinion Pilot Bearing

fax: 1-800-511-0516

Differential Pinion Bearing Cup

1.1 lbs.

For Models: 600 W/4 SP. TRANS. SN 1960-64), (2N, 8N, 9N ALL 1939-52), NAA 1953-54, DEXTA 1957-1964, (2000, 3000, 4110 ALL 1965>)

0.8 lbs.

For Models: 800 W/ 4 SP. TRANS. SN, 5 SP. SN106115> 1959>), (2N, 8N, 9N ALL 1939-1952)

A&I PRODUCTS

A-BB4222

A-BB4621B

Differential Front Pinion Cone


A-CBPN4179A

1.28 lbs.

For Models: (2N, 8N, 9N ALL 1939-1952), NAA 1953-1954, DEXTA 19574/1962


1-800-657-4343

111


Ford A-D5NN4115A

Rear Axle Seal

0.42 lbs.

A-8N4284

Gasket, Rear Axle Shaft

0.18 lbs.

Dim./Info: 2.03" ID 2.28" OD .50" THICK For Models: NAA, 600, 700, 8N, 800, 900

For Models: NAA, NAB, 8N Seal, Rear Axle Seal Inner

0.06 lbs.

10.65 lbs.

Oil Seal

For Models: DEXTA, SUPER DEXTA

A-F2NN4969AA

Diff. Lock Gear Case Adaptor

2.24 lbs.

For Models: 2000, 3000, 5000, 6600, 6610


A-81717238

A-E186EB9

A-C5NN4N064A

Coupler, Differential Lock

3.04 lbs.

For Models: 3000, 5000, 6600, 6610

Seal & Retainer (Outer), Rear Axle

0.68 lbs.

Replaces: C5NN4969D

A-E94EB9

0 lbs.

Bolt, Differential Ring Gear

12 Required

For Models: (3910, 4110, 4610 ALL 5/83>), 4000 65-75, 4600 75-81

A-C5NN4969E

Seal & Retainer (Outer), Rear Axle

0.66 lbs.

For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, DEXTA, SUPER DEXTA, 2310, 2810, 2910, 3910, 5110, 6410, 6810, 7810, 7910, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8340, TS80, TS90, TS100, TS110, TS115

A-380135S43

0 lbs.

Nut, Differential Ring Gear

Replaces: 83417169, 81829189, 34449ESA

For Models: 4830, 5000, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210

A-86531999

Outer Seal, Rear Axle

0.14 lbs.

Replaces: C5NN4115B

For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, DEXTA, SUPER DEXTA, TS100, TS110, TS115, TS80, TS90

A-C5NN4209G

Ring Gear & Pinion Set

Dim./Info: 6.16:1 RATIO

For Models: 2000, 2600, 2610, 3000, 3600, 3610

A-C9NN4N109A

Seal, Inner Rear Axle

Dim./Info: 2.00" I.D. 2.750" O.D.

38.27 lbs.

0.1 lbs. For Models: (2000, 3000 ALL 1965-12/1973 LESS 10 SP. TRANS. & TRANSMISSION BRAKE)

For Models: (2000, 3000 ALL 1965>)

112

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-8N4233A


Ford A-C5NN4236A

4.9 lbs.

Gear, Differential Side

A-E1NN4211AB

Spider, Differential

3.12 lbs.

Replaces: E1NN4211AA, 508E4211C, C5NN4211B

REF. 1

For Models: (2000, 3000, 4000 ALL 65\75 LH W/DIFF LOCK, LH/RH W/O DIFF LOCKS), (5000, 7000 ALL 65\75 RH W/DIFF LOCK LH/RH W/O DIFF LOCKS), (2600, 3600, 4600 ALL 75\81 LH W/DIFF LOCK, LH/RH W/O DIFF LOCKS), (5600, 5700, 6600, 6700, 7600, 7700 ALL 75\81 RH W/DIFF LOCK LH/RH W/O DIFF LOCKS), (2610, 3610, 4110 ALL 81\ LH W/DIFF LOCK, LH/RH W/O DIFF LOCKS), (5610, 6610, 6710, 7610, 7710 ALL 81\- RH W/DIFF LOCK LH/RH W/O DIFF LOCKS)

A-C5NN4239A

Gear, Differential Side

For Models: SUPER DEXTA 57/64, (2000, 3000, 4000, 5000, 7000 ALL 65/75), (2600, 3600, 4600, 5600, 5700, 6700, 7600, 7700 ALL 75/81), (2610, 3610, 4610, 5610, 6610, 6710, 7610, 7710 ALL 81/-)

A-508E4230A

(1) Thrust Washer

0.06 lbs.

REF. 5

6.72 lbs.

REF. 2

For Models: (MAJOR, SUPER MAJOR ALL 11-60/64), (2000, 3000, 4000, 5000, 7000 ALL 65/75), (2600, 3600, 4600, 5600, 6600, 6700, 7600, 7700 ALL 75/81), (2610, 3610, 4610, 5610, 6610, 6710, 7610, 7710 ALL 81/-) For Models: (2000, 3000, 4000 ALL RH FOR W/ DIFF LOCK, 65/75), (2600, 3600, 4600 ALL RH FOR W/ DIFF LOCK, 75/81), (2610, 3610, 4110, 4610 ALL RH FOR W/ DIFF LOCK, 81/-)

A-957E4292B

(1) Gear, Differential Spider

A-957E4228

(1) Thrust washer

0.1 lbs.

REF. 6

1.04 lbs.

Replaces: DDN4213B

REF. 3

For Models: SUPER DEXTA W/ DIFF. LOCK 57/64, (2000, 3000, 4000, 5000, 7000 ALL 65/75), (2600, 3600, 4600, 5600, 6600, 6700, 7600, 7700 ALL 75/81), (2610, 3610, 5610, 6610, 6710, 7710 ALL 81->)

A-NCA4630A

Differential Rear Pinion Cone

1.5 lbs.

For Models: (MAJOR, SUPER MAJOR ALL 11-60/64), SUPER DEXTA 57/64, (2000, 3000, 4000, 5000, 7000 ALL 65/75), (2600, 3600, 4600, 5600, 5700, 6600, 6700, 7700 ALL 75/81), (2610, 3610, 4610, 5610, 6610, 6710, 7610, 7710 ALL 81/-)



REF. 4

For Models: 600 W/ 4 SPEED TRANS. SN (1960-64))

A-NCB44136A

Bearing, Final Drive

0.05 lbs.

Dim./Info: INNER CUP

For Models: 600, 700, 800, 900

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

113


Ford A-NCB44135B

Bearing, Final Drive

0.3 lbs.

A-A8NN4251A

Seal, Outer Oil Rear Axle Shaft

0.04 lbs.

Replaces: V32728

Dim./Info: INNER CONE

For Models: 600, 700, 800, 900

A-NDA77121A

0.28 lbs.

For Models: 8N SN

For Models: NAA, NAB, 2N, 2000, 3000, 4000, 5000, 600, 700, 8N, 800, 9N, 900

A-D9NN7R510BA

Oil Seal, Clutch Release Brg. Hub Used On Tractors W/ Trans. PTO

0.04 lbs.

For Models: DEXTA, SUPER DEXTA, (2600, 3600 ALL W/ 6 & 8 SPEED TRANSMISSIONS), (2000, 3000, 4000 ALL W/ 6, 7 & 8 SPEED TRANSMISSIONS), (2610, 3610, 4110, 4600, 4610 ALL W/ 8 SPEED TRANSMISSION)

A-379313S91

O-Ring, Rear Axle Hsg. To Center Hsg. 0.02 lbs. O-Ring Should Always Be Replaced When Changing Brake Disc On Oil Immersed Systems.

For Models: 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710

A-A8NN4248A

Retainer Seal & Gasket, Rear Axle

0.75 lbs.

For Models: 8N SN

A-C7NNB742A

PTO Clutch Actuating Arm

0.57 lbs.

For Models: 2810, 2910, 3055, 3550, 3900, 3910, 4000, 4500, 4600, 4610

A-C5NN4044A

Gear, planetary

3.24 lbs.

Dim./Info: 20 Tooth 4.000" Dia. 1.800" Wide

For Models: 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700

A-C9NNP733A

PTO Feathering Spring (Heavy Duty)

Dim./Info: .243" THICK

For Models: 5000, 5600, 5700, 6600, 6700

A-E0NNB726AB

PTO Brake Band

0.2 lbs.

0.15 lbs. For Models: 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, (5000, 7000 ALL W/ SINGLE OR TWO SPEED PTO 1965>)

A-313283 For Models: TW10, TW20, 5100, 5110, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 7910, 8000, 8210, 8700, 9700, (5000, 6000, 7000 ALL W/ SINGLE OR DUAL SPEED)

A-D3NNP733A

PTO Feathering Spring (Std.)

0.16 lbs.

Dim./Info: .165" THICK For Models: TW15, TW25, TW35, TW5, 6410, 6810, 7410, 7910, 8000, 8200, 8210, 8530, 8600, 8700, 8730, 8830, 9000, 9200, 9600, 9700, (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 ALL W/ SINGLE OR TWO SPEED PTO), (5000, 7000 ALL W/ SINGLE OR TWO SPEED PTO1965>)

PTO Clutch Piston Ring

0.1 lbs.

For Models: 4600 W/ INDEPENDENT PTO 1975-1981, (4110, 4610 ALL W/ INDEPENDENT PTO 1981>), 4000 W/ INDEPENDENT PTO 4/1968 - 1975, (5600, 5700, 6600, 6700, 7600, 7700 ALL W/ SINGLE OR 2 SPEED PTO ), (5610, 6610, 6710, 7610, 7710 ALL 1981>)

A-C9NNN747A

Brake Arm, PTO Clutch

rockshaft / hitch / PTO / drawbars

PTO Clutch Piston Inner Seal 0.01 lbs. This Seal Fits Too Many Applications To List All Of Them, Please Check Before Ordering

For Models: 2810, 2910, 3055, 3550, 3900, 3910, 4000, 4500, 4600, 4610

A-D0NN4049A

For Models: TW10, TW15, TW20, TW25, TW30, TW35, TW5, 5000, 6000, 7000, 8000, 9000, 4000 1965>

0.16 lbs.

For Models: 3055, 340, 3910, 4000, 4110, 4140, 4410, 445, 4600, 4610, 532, 540, 545

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

115


Ford A-C9NNN747B

Brake Arm, PTO Drive

0.14 lbs.

A-C5NN798A

0.4 lbs.

Bushing, PTO drive shaft front

Dim./Info: .94" LONG 1.131" ID For Models: (5000, 5100, 5190, 5200, 5340, 7000, 7100, 7200 ALL SINGLE SPEED TRANSMISSION)

A-D2NNN776A

PTO drive clutch valve support

0.7 lbs.

For Models: (5000 SERIES, 6000 SERIES, 7000 SERIES ALL W/SINGLE SPEED PTO)

A-D1NN772B

Shaft, PTO input

5.12 lbs.

Dim./Info: 15 TEETH 29 SPLINES 11.6875" LENGTH For Models: (5600, 5700, 6600, 6700, 7600, 7700 ALL W/ SINGLE SPEED PTO 1975-81), (5610, 5900, 6610, 6710, 7610, 7710 ALL W/ SINGLE SPEED PTO 1981-91), (5000, 7000 ALL W/ SINGLE SPEED PTO 6/73>)

A-C7NNN776C

PTO drive clutch valve support

0.69 lbs.

For Models: (2100, 3100, 3400, 3500, 4400, 4500 ALL W/ MAN. REVERSE TRANS.)

A-E75GE9

A-314267

PTO OIL SEAL

Snap ring, PTO front bearing

0.62 lbs.

0.01 lbs.

For Models: (2000, 4000, 600, 700, 800, 900 ALL W/ 1.375" DIA. PTO)

For Models: (5000, 7000 ALL FOR SINGLE SPEED PTO 1/65-5/73)

A-957E703A

Bearing, PTO front

10.65 lbs.

Replaces: 195763M1, 1190

A-9N735B

Pto shaft sleeve Used w/9N733B pto shaft housing w/1 1/8" O.E.M. pto shaft

0.31 lbs.

Dim./Info: 1 5/8" X 2 1/2" X 7/8" For Models: DEXTA, SUPER DEXTA

A-C5NN799A

For Models: 2N, 600, 700, 8N, 800, 9N, 900

Oil Seal, PTO Input Shaft

0.03 lbs.

For Models: (5000, 7000 ALL W/ 7 & 8 SPEED TRANSMISSIONS), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 ALL W/ 8 SPEED TRANSMISSION)

A-D9NN7048BA

Oil Seal, PTO Input Brg. Retainer For Tractors W/ Live Or Independent PTO

0.02 lbs.

A-NAA798A

0.4 lbs.

Thrust bushing, PTO shaft

Dim./Info: .930" LONG 1.634" ID For Models: (NAA, 2000, 4000, 600, 700, 800, 900 ALL W/ 1.125" OR 1.375" PTO SHAFT)

A-E7NN797BA

PTO sleeve

0.16 lbs.

Replaces: 310087

For Models: (2000, 4000, 600, 700, 800, 900 ALL W/ 1.375" DIA. PTO) For Models: (5000, 7000 ALL W/ 7 & 8 SPEED TRANSMISSIONS), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 ALL W/ 8 SPEED TRANSMISSION)

A-957E727A

Oil Seal, PTO Input Shaft For Models W/ Live Or Independent PTO

A-C5NNN705A

Sleeve, PTO intermediate shaft

1.72 lbs.

Dim./Info: 6 & 26 SPLINES

0.02 lbs.

For Models: (2000, 3000, 4000 ALL W/6SP / 8SP TRANS.)

For Models: DEXTA, SUPER DEXTA, (2000, 3000, 4000 ALL W/ 6, 7 & 8 SPEED TRANSMISSIONS), (2610, 3610, 4110, 4600, 4610 ALL W/ 8 SPEED TRANSMISSION)

116

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



Replaces: C5NN772C


Ford A-D1NN745B

1.8 lbs.

Gear, PTO (540)

Dim./Info: 3.12" O.D. 23 TEETH

A-D1NN745B

PTO Drive Gear For Single Speed 540 RPM Independent PTO Drive Shaft.

1.8 lbs.

Dim./Info: 3.12" O.D. 23 TEETH

For Models: (4000, 5000, 6600, 6610 ALL W/SINGLE SP PTO)

A-C5NN717A

2 lbs.

Sleeve, PTO clutch

For Models: (5610S, 6610S, 7610S ALL 1/1994>), (5640, 6640, 7740 ALL 11/91>), (5000, 7000 ALL 1965-1975), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-1981), (5610, 6610, 6710, 7610, 7710 ALL 1981-10/1991)


A-D9NNN710CA

Pump idler gear

5.12 lbs.

Dim./Info: 55 TEETH

For Models: 2000 1965>, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 250C, 2600, 260C, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3900, 3930, 4000 1965>, 4100, 4110, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D

A-E0NN745AA

PTO Drive Gear For 540 / 1000 RPM Two Speed Independent PTO.

Hyd. Pump & PTO Drive Gear

5.93 lbs.


For Models: (6600, 6610 ALL W/ 8SP TRANS)

A-D6NNN750A

0.24 lbs.

0.09 lbs.

PTO Seal

For Models: (5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 ALL W/ SINGLE SPEED TRANSMISSION)

A-D3NNN883A

Gasket, Hydraulic Lift Cover

9.66 lbs.

Replaces: C7NNN750A

Dim./Info: 53 / 52 Tooth 25 Spline 3.230" Wide

For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL NON-SHIFTABLE 11/1991>), (7810, 7910, 8210 ALL NON-SHIFTABLE 1982-10/1991), (5610S, 6610S, 7610S, 7810S ALL 1/1994>), (5610, 6610, 6710, 7610, 7710 ALL 1981-10/1991), 7010S 4/1996>

A-E0NNA726AD

PTO Driven Gear (540 RPM) For 540 / 1000 RPM Two Speed Independent PTO.

For Models: 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700

A-F1NNN750AA

Hub, PTO drive clutch Check tooth count before ordering.

2.88 lbs.

15.7 lbs.

Dim./Info: 70 TEETH

Dim./Info: 25 SPLINE 20 TEETH & 52 TEETH For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL NON-SHIFTABLE 11/1991>), (7810, 7910, 8210 ALL NON-SHIFTABLE 1982-10/1991), (5610S, 6610S, 7610S, 7810S ALL 1/1994>), (5610, 6610, 6710, 7610, 7710 ALL 1981-10/1991), 7010S 4/1996>

For Models: (5000, 5110, 5610, 5900, 6410 (UK), 6600, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210 ALL W/2SP / SINGLE SP PTO)

A-C5NNA726A

Gear, PTO driven


A-E7NN502AA

For Models: (2000, 3000 ALL W/6SP, 7SP, / 8SP TRANS.)

16.3 lbs.

Dim./Info: 81 TEETH (13.34" O.D.) 29 SPLINES

For Models: 5000 W/SINGLE SP PTO

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

117


Ford A-E0NNA726BA PTO Driven Gear (1000 RPM) For 540 / 1000 RPM Two Speed Independent PTO.

13.3 lbs.

Dim./Info: 25 TEETH & 52 TEETH

For Models: 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000 ALL 1965> Single/ Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 ALL Single/ Two Speed)

0.45 lbs.

A-E1NNN777AB

Hub, standard

4.48 lbs.

Replaces: Finn# 83936827, C5NNN777A, E1NNN777AA, E2NNN777AA

NOTE: When replacing C5NNN777A 15 spline hub, you also need to replace C5NN7A684AA 15 spline shaft.

Dim./Info: 20 Internal splines For Models: NAA ), (TW10, TW20, TW30 ALL 79-83), (TW15, TW25, TW35, TW5 ALL 83->)

Dim./Info: 3/8" THICK

A-F1NNN777AA

PTO Drive Hub

4.44 lbs.

Dim./Info: 22 SPLINE For Models: 2600, 2610, 3600, 3610, 4000, 4110, 4600, 4610, (2000, 3000 ALL W/ 4, 6, 7 OR 8 SPEED TRANSMISSION)

A-D1NN473A

Backup Ring, Hyd. Lift Cyl. Piston

0.03 lbs.

For Models: TS100, TS110, TS90, 5640, 6640, 7740, 7840, 8240, 8340

A-C5NNN777A

0 lbs.

PTO HUB

Dim./Info: 15 Splines For Models: (3000 SERIES, 4000 SERIES, 4100, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000 SERIES ALL 1/65-12/74), 5200 1/67-12/74, (7000, 7200 ALL 10/71-12/74)

A-310089

Housing, PTO shaft

3.24 lbs.

For Models: 6600, (5600, 5700, 6700, 7600, 7700 ALL W/ 7 OR 8 SPEED TRANSMISSION), (5000, 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7000, 7610, 7710 ALL W/ 8 SPEED TRANSMISSION)

For Models: (2000, 4000, 600, 700, 800, 900 ALL ORIGINALLY EQUIPPED W/ 1 3/8" PTO SHAFT)

118

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



2.88 lbs.

For Models w/ 8 or 10 Plate Ind. PTO Clutch

For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL NON-SHIFTABLE 11/1991>), (7810, 7910, 8210 ALL NON-SHIFTABLE 1982-10/1991), (5610S, 6610S, 7610S, 7810S ALL 1/1994>), (5610, 6610, 6710, 7610, 7710 ALL 1981-10/1991), 7010S 4/1996> PTO Shaft Bearing (Outer)

Hub, PTO drive clutch

Replaces: D2NNN750A

Dim./Info: 84 HELICAL TEETH 8 SPLINES

A-9N715C

A-E0NNN750AA


Ford A-312428

12.3 lbs.

PTO shaft, HD 1 3/8"

A-NAA70038

19 lbs.

PTO assy.

Dim./Info: 32.620" LONG For Models: 2000, 4000, 600, 700, 800, 900

A-E4NN7A684AA

12.34 lbs.

PTO Shaft


A-E1NN7A684AB

12.2 lbs.

PTO Shaft

Dim./Info: 20 & 25 spline 39.870" long For Models: (5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710 ALL LESS SYNC TRANS)

A-C9NN7A684A

PTO drive shaft

A-9N733B A-310088 A-NAA722C A-NAA70038C A-9N754 A-9N715BC A-9N73538 A-D8NN703AA A-C5NN747A A-NAA70038S

Ref 2 - Housing, PTO assy. Cover, PTO shaft Ref 4 - Seal, retaining collar Ref 5 - Collar w/ tapered pin Ref 6 - Snap ring (2 used) Ref 7 - Front bearing, PTO shaft Ref 8 - Seal Sleeve, PTO shaft Seal, PTO shaft Ref 9 - Gasket, PTO housing Ref 11 - PTO shaft

3.04 lbs. 1.88 lbs. 0.61 lbs. 0.18 lbs. 0.02 lbs. 0.45 lbs. 0.27 lbs. 0.14 lbs. 0.03 lbs. 9.5 lbs.

For Models: NAA 1953-54

A-9N70038

PTO assembly Converts from 1.125" to 1.375"

14.9 lbs.

11.42 lbs.

Dim./Info: 20 Splines 37.562" long For Models: 8000, 8200, 8400, 8600, 8700, 9000, (9200, 9600, 9700 ALL 9/69-78)

A-C7NN7A684D

11.9 lbs.

PTO drive shaft

Dim./Info: REF. 1

Dim./Info: 20 splines 37.500" long For Models: (8000, 8700, 9000, 9700 ALL 68-8/69)

A-F0NN7A684AB

12 lbs.

PTO SHAFT

Dim./Info: 39.940" LONG 22 & 23 SPLINE For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL LESS DUAL POWER)

A-D8NN7A684AB

PTO Drive Shaft

A-9N733B A-310088 A-NAA70038C A-9N754 A-9N715BC A-9N73538 A-D8NN703AA A-C5NN747A A-9N70038S

Ref 2 - Housing, PTO assy. Ref 3 - Cover, PTO shaft Ref 4 - Collar w/ tapered pin Ref 5 - Snap ring (2 used) Ref 6 - Front bearing, PTO shaft Ref 7 - Seal Sleeve, PTO shaft Seal, PTO shaft Ref 9 - Gasket, PTO housing PTO shaft

3.04 lbs. 1.88 lbs. 0.18 lbs. 0.02 lbs. 0.45 lbs. 0.27 lbs. 0.14 lbs. 0.03 lbs. 9.6 lbs.


11.64 lbs.

Dim./Info: 22 & 25 tooth splines 37.500" long For Models: (TW10, TW20, TW30 ALL 79->)

A-D8NN7A684BA

PTO drive shaft


Dim./Info: 20 & 25 spline 39.870" long For Models: (5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710 ALL LESS SYNC TRANS)

12 lbs.

Dim./Info: 22 & 25 tooth splines 37.500" long For Models: (8000, 8600, 8700, 9000, 9700 ALL 9/69-78 HVY DUTY)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

119


Ford A-NCA70038

20 lbs.

PTO shaft assy.

A-C5NNA701A

9.04 lbs.

PTO Shaft

32.687" LONG

Dim./Info: 25.4" LONG 21 & 25 SPLINES For Models: (5000, 6600, 6610 ALL W/SINGLE SP PTO)

A-C5NNA701K

A-9N733B A-310088 A-NAA722C A-NAA70038C A-9N754 A-9N715BC A-9N73538 A-D8NN703AA A-C5NN747A A-NCA70038S

Ref 2 - Housing, PTO assy. Ref 3 - Cover, PTO shaft Ref 4 - Seal, retaining collar Ref 5 - Collar w/ tapered pin Ref 6 - Snap ring (2 used) Ref 7 - Front bearing, PTO shaft Ref 8 - Seal Sleeve, PTO shaft Seal, PTO shaft Ref 9 - Gasket, PTO housing PTO shaft

3.04 lbs. 1.88 lbs. 0.61 lbs. 0.18 lbs. 0.02 lbs. 0.45 lbs. 0.27 lbs. 0.14 lbs. 0.03 lbs. 10.34 lbs.

8.48 lbs.

PTO countershaft

Dim./Info: 11 / 6 Spline 24.250" Long For Models: (2000, 3000, 4000 ALL W/LIVE PTO / 6SP / 8SP TRANS.))

A-C5NN702A

A-E5NNA728AA

PTO Countershaft

PTO Rear Shaft (10 Spline)

10.8 lbs.

Dim./Info: 29.46" LONG 6 & 10 SPLINES For Models: (2000, 3000, 3600, 3610 ALL W/6SP, 7SP, 8SP, / MAN. REVERSE TRANS.)

A-D8NN725AB

For Models: 600, 800, 900

A-C7NN702B

Dim./Info: 10 tooth splines 32.500" long For Models: (2000, 3000 ALL W/ 4SP TRANS / 65-70)

15.18 lbs.

PTO Shaft

Dim./Info: 26 tooth splines 30.625" long For Models: 2600, 2610, 3100, 3600, 3610, (2810, 2910, 3910, 4110, 4610 ALL W/ IND PTO), (3900, 4600 ALL W/ 7, 8, / MANUAL REVERSE 10/80->)

A-C5NNA701C

PTO shaft, 540 RPM

10.68 lbs.

4 lbs.

Dim./Info: 6 / 23 Spline 12.0625" Long For Models: (2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4110, 4330, 4340 ALL W/ TRANSMISSION PTO)

Dim./Info: 28.160" LONG For Models: (2000, 3000, 4110 ALL W/ SELECTO SPEED TRANS / SINGLE SPEED PTO)

A-D3NN710D

12.94 lbs.

PTO Shaft

Replaces: C5NN710A

A-C7NN702A

PTO countershaft

8.16 lbs.

Dim./Info: 11 / 6 Spline 24.250" Long For Models: (3550, 4400, 4500 ALL W/INDEPENDENT PTO / MAN. REVERSE TRANS. 4/68 / UP)

A-E3NN725BB

PTO Shaft For Use On Models With Independent PTO & 4WD Only.

Dim./Info: 6 & 26 SPLINES 30.625" LONG For Models: 3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, (3900, 4600, 515, 532 ALL 1/75-9/80), (340, 340A, 340B, 445, 445A, 540, 540A, 540B, 545, 545A ALL 1/78-9/80)

A-D8NNB733AC

PTO Output Shaft Sleeve For 540 / 1000 RPM Two Speed Independent PTO.

2.54 lbs.

14.75 lbs.

Dim./Info: 30.64" LONG For Models: (250C, 260C, 2810, 2910, 3230, 335, 340A, 340B, 3430, 345C, 345D, 3910, 3930, 4110, 4130, 445A, 445C, 445D, 455C, 455D, 4610, 4630, 4830, 5030, 540A, 540B, 545A, 545C, 545D ALL W/ INDEPENDENT PTO & 4WD)

120

A&I PRODUCTS

fax: 1-800-511-0516

For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL NON-SHIFTABLE 11/1991>), (7810, 7910, 8210 ALL NON-SHIFTABLE 1982-10/1991), (5610S, 6610S, 7610S, 7810S ALL 1/1994>), (TW10, TW20 ALL 1979-1982), (5610, 6610, 6710, 7610, 7710 ALL 1981-10/1991), (TW15, TW25, TW5 ALL 1983-2/1990), 7010S 4/1996>


1-800-657-4343



Dim./Info: REF. 1

9.5 lbs.

PTO Shaft


Ford A-E7NNB728AA

3.6 lbs.

PTO Shaft (540 RPM)

A-D8NNB728BC

1000 RPM PTO Shaft

6.88 lbs.

Dim./Info: 8 tooth drive splines 11.719" Long For Models: (5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340 ALL W/ 2 SPEED SHIFABLE PTO)

A-D2NNB728A

7 lbs.

540 RPM PTO Shaft

Dim./Info: 36 & 38 tooth splines 11.475" long

For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL W/ 2SP NON-SHIFT PTO 11/91->), (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710 ALL W/ 2SP NON-SHIFT PTO 81->), (7910, 8210 ALL 2SP 82->), (G170, 5100, 5600, 6600, 6700, 7100, 7600, 7700, 8000, 8670, 8700, 9700 ALL 2SP 9/93->), (TW10, TW20 ALL 79->), (TW15, TW25, TW5 ALL 83->)

A-E7NNB728BA

1000 RPM PTO Shaft


1000 RPM PTO Shaft

7.08 lbs.

Dim./Info: 38 tooth splines 11.475" long

For Models: (5640, 6640, 7740, 7840 ALL 2SP SHIFTABLE 10/89->), 8340 2SP SHIFTABLE 11/91->

A-D8NNB728CC

1.750" (LARGE) PTO Shaft

Dim./Info: 8 tooth drive splines 12.360" long

For Models: (5100, 5200, 7100, 7200 ALL W/ 2SP 6/73->), (8000, 9000 ALL W/ 2SP 68-78), (5600, 5700, 6600, 6700, 7600, 7700 ALL W/ 2SP 75->)

A-D2NNN752C

8.96 lbs.

For Models: 8670, TW30 SINGLE SPEED 79->, TW35 SINGLE SPEED 83->

5.4 lbs.

540 RPM PTO Shaft

NEW! A-C7NNB787A

Dim./Info: 29 tooth drive splines 10.890" Long

PTO Drive Clutch Valve Support

2.56 lbs.

For Models: 5100, 5200, 7100, 7200, (5000, 7000 ALL IND PTO, 65-5/73)

A-E4NNN752AA

6.6 lbs.

540 RPM PTO Shaft

Dim./Info: 29 tooth drive splines 12.030" Long

For Models: 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700

A-9N502

Gasket, Hyd. Lift Housing

0.02 lbs.

Gasket, Hyd. Lift Housing Cover

0.02 lbs.

For Models: (5000, 7000 ALL IND 6/73->), (5600, 5700, 6600, 6700, 7600, 7700 ALL W/ SINGLE SP), (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710 ALL W/ SINGLE SP 81-9/89) For Models: 2N, 8N, 9N

A-E8NN710AA

540 RPM PTO Shaft

8.92 lbs.

A-NCA502A

Dim./Info: 28 tooth drive splines 11.764" long For Models: (5110, 5610, 5900, 6410, 6410 (UK), 6610, 6710, 6810, 7610, 7710 ALL W/ SINGLE SPEED PTO 10/89->), (5640, 6640, 7740 ALL W/ SINGLE SPEED 11/90->)

A-E6NNB728AA

540 RPM PTO Shaft

For Models: 600, 700, 800, 900

6.74 lbs.

A-NAA502A

Gasket, Hyd. Lift Housing Cover

0.02 lbs.

Replaces: D8NNB728AD, D8NNB728AC

Dim./Info: 8 tooth drive splines 11.719" Long For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL W/ 2SP NON-SHIFT PTO 11/91->), (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710 ALL W/ 2SP NON-SHIFT PTO 81->), (7910, 8210 ALL 2SP 82->), (G170, 5100, 5600, 6600, 6700, 7100, 7600, 7700, 8000, 8670, 8700, 9700 ALL 2SP 9/93->), (TW10, TW20 ALL 79->), (TW15, TW25, TW5 ALL 83->), 7810 2 SP 82->

For Models: NAA

A-3B6523


Dim./Info: 20 tooth drive splines 6.383" long

For Models: (5100, 5200, 7100, 7200 ALL W/ 2SP 6/73->), (8000, 9000 ALL W/ 2SP 68-78), (5600, 5700, 6600, 6700, 7600, 7700 ALL W/ 2SP 75->)

A-D2NNB728B

3.3 lbs.

Hyd. Lift Cover Repair Kit 0.7 lbs. Kit Contains (1)C0NNB999A Seal, (1)NCA473A Washer, (1)E7NN502AA Gasket & (18)O-Rings.

For Models: (2000, 3000 ALL 1965>)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

121


Ford A-3B5354 Hyd. Lift Cover Repair Kit 0.18 lbs. Kit Contains (2)NAA552A Gaskets, (1)NAA553B Gasket, (1)NAA473A Backup Washer, (1)NAA502A Gasket, (1)NAA533A Piston O-Ring, (1)44R011 ORing, (1)44R112 O-Ring, (1)44R113 O-Ring, (1)44R114 O-Ring.

A-47P6214

O-Ring/Seal Kit, Hyd. Lift Cover, Cyl.& Pump 0.2 lbs. Kit Contains: (1)86484S9, (1)87036ES, (6)87006S9, (1)87037S94, (5)87010S9, (1)87038S94, (1)87012ES,(1)87044S94, (1)87016ES,(2)C5NNN917A, (9)87033S94, (3)C5NNN991B, (10)87034ES, (1)C7NNG997A, (3)87035ESB, (1)D2NNB997A.

A-9N552 A-3B909

Hyd. Lift Cover Repair Kit 0.25 lbs. Kit Contains (2)9N613 Valve Chamber Gaskets, (1)9N611 BasePump Gasket, (2)9N4131 Inspection Cover Gaskets & (1)C5NN747A PTOGasket.

Gasket, Hyd. Cyl. To Center Housing 2 Used W/ 9N510D Hydraulic Lift Cylinder

0.04 lbs.


A-C7NN488G

Control Valve & Sleeve, Hyd. Lift Cyl.

0.67 lbs.

White Color Code

For Models: 2000, 3000, 4000, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700 For Models: 2N, 8N, 9N

A-C7NN488J A-3B928

Hyd. Lift Cover Repair Kit 0.3 lbs. Kit Contains (2)9N613 Valve Chamber Gasket, (1)9N553 Gasket, (1)NAA533A Piston O-Ring, (1)NAA473A Back Up Washer, (1)9N502 Lift Cover Gasket, (2)9N4131 Inspection Cover Gasket, (1)C5NN747APTO Gasket,(1)9N611 Gasket & (2)9N552 Gaskets.

Control Valve & Sleeve, Hyd. Lift Cyl.

0.75 lbs.

Blue Color Code

For Models: 2000, 3000, 4000, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700

A-8N486B

Pin, hyd lift yoke

0.72 lbs.

For Models: 8N, 900 EXCEPT ROW CROP 1/53>, 800 EXCEPT ROW CROP 1/55>, (2000, 4000 ALL 4 CYL. HI-CLEARANCE 1/53>) For Models: 2N, 8N, 9N

A-NCA535A

Hydraulic lift rocker

2.9 lbs.

A-3B5564

Hyd. Lift Cover Repair Kit 0.25 lbs. Kit Contains (1)C0NNB999A Seal, (1)NCA473A Washer, (1)9N532Gasket, (1)NCA502A Gasket & (20)O-Rings

For Models: 2N, 8N, 9N, 900, 800 HI-CLEARANCE, (2000, 4000 ALL 4 CYL. HICLEARANCE)

A-C7NN535B


4.3 lbs.

For Models: (2000, 4000, 600, 800, 900 ALL 1955-64)

For Models: 2600 1/75>, 2000 3 CYL. 1/65>

122

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: (2000, 3000, 4000, 5000, 7000 ALL 1965-75) For Models: NAA 1953-1954


Ford A-E0NN535AA

4.4 lbs.


A-D8NN486AB

Pin, hyd lift rocker

1.4 lbs.


0.95 lbs.

For Models: 5000 1/65>

A-D8NN486BB

For Models: 3000 1/65>, (2600, 3600, 3600N ALL 1/75>), (3610, 3610N ALL 1/81-12/82), 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-E2NN535BA

hydraulic lift rocker

12.34 lbs. For Models: 5000 1/65>

A-C5NNN939A

Pin, lower lift fork (3")

0.8 lbs.


A-E0NN535CA


13.5 lbs.

For Models: 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700

A-9N532

Gasket, Quadrant to Lift Cover

0.04 lbs.


A-E0NN535DA

12 lbs.


For Models: NAA, 2N, 600, 700, 8N, 800, 9N, 900

A-NCA545B

Hydraulic Lift Ram Arm

5.58 lbs.


A-C0NNC893A

Lift link pin, lower

0.31 lbs. For Models: 600, 700, 800, 900, (2000, 4000 ALL W/ 4 CYL. ENGINE , 4000 3 CYL. 1/65>

A-C5NNK840B


11.78 lbs.

0.5 lbs.



For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-C5NNK840A

Hydraulic Lift Cylinder

A-NAA530B

Hydraulic Lift Piston

1.1 lbs.

0.52 lbs.

For Models: 4610 1/81>, 4000 3 CYL. 1/65>

A-E1NN486AA


1.19 lbs.

For Models: NAA, NAB, 2N, 8N, 9N

A-86534029

Bushing, hyd lift rocker

1.1 lbs.

Replaces: 9N531C

For Models: 4600SU, 3600 1/75>, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 1/65>

A-E1NNB681AA

Hydraulic Lift Shaft Bushing


For Models: 4610SU, 3000 1/65>, 3600 1/75>, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 1/65>

0.36 lbs. For Models: DEXTA, NAA, NAB, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900

For Models: 2000, 231, 233, 2600, 3120, 3300, 333, 335, 3400, 3500, 3600, 3600N, 3600V, 4110, 4600SU, 531

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

123


Ford A-C5NN544B

Hydraulic lift shaft

30.66 lbs.

For Models: 5000, 5100, 5110, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, (6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210 ALL )

5.68 lbs.

For Models: (600, 700, 800, 900 ALL RH ARM), (NAA, 2N, 8N, 9N ALL RH/LH ARM), (2000, 4000 ALL 4 CYL. )

A-D1NN473B

Backup Ring, Hyd. Lift Cyl. Piston For Models W/ 3.75" Diameter Piston

0.02 lbs.


A-C5NN518B

Gasket, Hyd. Lift Cover Gasket

0.04 lbs. For Models: (5000, 7000 ALL 1965-75), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81)

A-D3NN473A

Backup Ring, Hyd. Lift Cyl. Piston For Models W/ 4.12" Diameter Piston

For Models: NAA, 2N, 600, 700, 8N, 800, 9N, 900

A-NAA553B

Gasket, Hyd. Lift Cyl. Housing

0.04 lbs.

For Models: (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975-81), (5610, 6610, 6710, 7610, 7710 ALL 1981>)

For Models: NAA

A-NAA552A

Gasket, Hyd. Cyl. To Center Housing

0.04 lbs.

For Models: NAA

A-C5NN533A

0.02 lbs.

O-Ring, Hyd. Lift Cyl. Piston

0.1 lbs.

A-NCA473A


0.02 lbs.

For Models: (2000, 3000 ALL 1965-75), (2600, 3600 ALL 1975-81), (2610, 3610 ALL 1981>)

A-D3NNB485A


0.02 lbs.

For Models: 4000 1965-75 For Models: 4600 1975-81, (4110, 4610 ALL 1981>)

124

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-9N543B

A-87120S95


Ford A-9N675

Ring Set, Hyd. Lift Cyl. Piston Set Of 3 - Used W/ 9N530B Piston

0.02 lbs.

A-6N577A

RH level box assy w/ fork Adjustment is 20.250" to 25.250" center hole to center hole

10.92 lbs.

center to center hole.


A-EC0NN577AB

A-957E566

Knuckle

A-9N595

Pin

0.32 lbs.

A-C5NN594E

Handle

0.66 lbs.

0.8 lbs.

6 lbs.

LEVELING ARM ASSY.



A-8N577A

11 lbs.

RH leveling box assy w/ fork Adjustment is 20.250" to 25.250" center hole to center hole

A-NCA577A A-NCA585B

RH leveling box assy less fork Fork For Models: 600, 700, 800, 900

A-6N564B

LH Leveling rod assy.

6.21 lbs. 4.5 lbs. 8.54 lbs.

Replaces: NCA564B

A-957E566

Knuckle

A-9N595

Pin

0.32 lbs.

A-C5NN594E

Handle

0.66 lbs.

0.8 lbs.

A-NCA577A A-EC0N585A

RH leveling box assy less fork Fork For Models: NAA, 2N, 8N, 9N

A-8N564B

6.21 lbs. 4.5 lbs. 8.3 lbs.

LH Lift rod assy

Replaces: 9N564B one piece unit

Includes: A-C5NNB863A rod, A-EC0N585A fork, & A-957E566 knuckle shown below.

A-957E566

Includes: A-C5NNB863A rod, A-NCA585B fork, & A957E566 knuckle.

A-957E566

Knuckle

A-9N595

Pin

A-C5NNB863A

LH Yoke rod

0.8 lbs.

0.32 lbs. 2.1 lbs.

A-NCA585B

4.5 lbs.

Fork For Models: 600, 700, 800, 900

A-E0NN569AA

RH Leveling box assy w/ fork Adjustment is 20.250" to 25.250" center hole to cntr hole.

10.64 lbs.

0.8 lbs.

Knuckle

center to center hole.

A-9N595

Pin

A-C5NNB863A

LH Yoke rod

A-957E566

Knuckle

A-9N595

Pin

0.32 lbs.

A-C5NN594E

Handle

0.66 lbs.

A-NCA577A A-E0NN585BA

RH leveling box assy less fork Fork

6.21 lbs. 4.36 lbs.

0.8 lbs.

0.32 lbs. 2.1 lbs.

A-EC0N585A


Dim./Info: 19.250" [length] 17.750" min / 25-1/2" max [adj] .625" [pin holes] 5/8" PIN HOLES

4.5 lbs.

Fork For Models: NAA, 2N, 8N, 9N

For Models: 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4110, (340, 3400, 3550, 420 ALL UTIL)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

125


Ford A-2N564B LH Complete lift arm 8.6 lbs. Includes: A-C5NNB863A rod, A-E0NN585BA fork, & A-957E566 knuckle.

RH Leveling box assy w/ fork Adjustment is 25.000" to 31.000" center hole to center hole

30.75 lbs.

0.8 lbs.

Knuckle

A-9N595

Pin

A-C5NNB863A

LH Yoke rod

A-E0NN585BA

Fork

A-C5NNP929A

Knuckle assy

1.98 lbs.

2.1 lbs.

A-C5NNC999A

Handle

0.66 lbs.

4.36 lbs.

A-D2NNN983A

RH leveling box assy.

0.32 lbs.

20 lbs.

For Models: 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4110, (340, 3400, 3550, 420 ALL UTIL)

A-C5NN569AM

RH leveing box assy w/ fork adjustment is 27.250" to 32.250" center hole to ctr hole

A-957E566

13.82 lbs.

A-C5NNN579C A-C7NN568B A-C7NNA935C 0.8 lbs.

Knuckle

Rod w/ gear 6.2 lbs. Bevel gear 0.24 lbs. Fork 11.13 lbs. For Models: 5000, 5100, 5200, 5600, 6600, 6610, 6700, 7100, 7200, 7600, 7700

A-D2NNN984A

Leveling Rod Assembly (LH)

20.4 lbs.

A-C5NNB863C

LH Yoke rod

6.25 lbs.

6.21 lbs. 3.7 lbs.

A-C5NNP929A

Knuckle assy

1.98 lbs.

LH Complete lift arm 11.08 lbs. Includes: A-E4NNN673AA rod, A-C5NN585B fork, & A-957E566 knuckle.

A-C5NNN936A

Pin

0.65 lbs.

A-9N595

Pin

0.32 lbs.

A-C5NN594E

Handle

0.66 lbs.

A-NCA577A A-C5NN585B

RH leveling box assy less fork Fork


A-4N564B

A-957E566

0.8 lbs.

Knuckle

A-C7NNA935C A-C7NNA935C

A-9N595

Pin

A-E4NNN673AA

LH Yoke rod

3.5 lbs.

A-C5NN585B

Fork

3.7 lbs.

11.13 lbs.

Fork For Models: 5000, 6000, 7000

11.13 lbs.

Fork

0.32 lbs. For Models: 5000, 5100, 5110, 5200, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210

A-E0NN569KB-KIT

Leveling Box Assy. W/ Fork

25.9 lbs.

For Models: 4000, 4600 For Models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210, TW15, TW25, TW35, TW5

126

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-957E566

A-D2NNN983WF


Ford A-SBA344140101

Upper Lift Rod Pin

0.36 lbs.

Pin, Lower Lift Rod

0.16 lbs.

For Models: (1215, 1220 ALL 1/87 - 10/98), (1120, 1720 ALL 1/87>), (TC18, TC21, TC21D ALL 11/98>)

A-D2NNN984A

Leveling Rod Assembly (LH)

20.4 lbs.

For Models: 5000, 6000, 7000

Lift Rod 5.31 lbs. Used On Models TC25, TC25D, TC29, TC29D, TC33 & TC33D W/ Standard Hitch SN G021527> & Deluxe Hitch SN G023195> & Between SNG021299-G021451.

A-957E555

0 lbs.

Lower Lift Arm (RH/LH)

Dim./Info: 5/8" Thick 32" Center To Center For Models: DEXTA

For Models: (TC35D, TC40D, TC45D ALL W/ DELUXE HITCH), (TC35, TC40, TC45 ALL W/ ECONOMY OR DELUXE HITCH), (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL W/STD. HITCH SN G021527> & DLX. HITCH SN G023195> (SEE NOTE))

A-SBA370200380

Lift Rod (LH)

Lift Rod (LH)

Dim./Info: .875" PIN HOLES 31.750" long (hole ctrs) Cat I For Models: 2N, 8N, 9N, NAA 1953-1954

5.01 lbs.

A-SBA370101641

4.97 lbs.

Lift Rod (LH)

For Models: (1120, 1215, 1220 ALL 1/87 - 10/98), (TC18, TC21, TC21D ALL 11/98>)

A-SBA370100160

Pull Arm (RH/LH)

A-86526733

Lift Rod 5.36 lbs. On Models TC25, TC25D, TC29, TC29D, TC33 & TC33D Used On Models W/ Standard Hitch SN ), (1310, 1510 ALL 1/83>), 1710 1/85>

A-SBA370101092

Pull Arm (RH/LH)

7.14 lbs.

For Models: (1320, 1520, 1620 ALL 1/87>), 1715 1/93> Pull Arm (RH/LH)

18.03 lbs.

Dim./Info: 5/8" x 2 1/2" 31.81 Center to Center

For Models: (2120, 3415 ALL 1/87>) Lift Rod (LH)

13.84 lbs.

Dim./Info: 5/8" x 2 1/2" 27.87 Center to Center

A-SBA370100351

A-SBA370200211

14.21 lbs.

Dim./Info: 5/8" x 2 1/2" 28.50" Center to Center

For Models: 1710O 1/85>

A-SBA370201361

12.68 lbs.


For Models: (1320, 1520, 1620, 1720, 1920 ALL 1/87>), 1715 1/93>

A-SBA370201400

14.28 lbs.

Pull Arm (RH/LH)


For Models: (1300, 1500, 1700, 1900 ALL 1/79>), (1310, 1510, 1710, 1910 ALL 1/83>)

A-SBA370201571

11 lbs.

Lower Lift Arm, RH/LH

This arm is heat treated.

4.49 lbs.

For Models: 1200 1/79>, (1110, 1210 ALL 1/83>)

A-SBA370200220

A-9N555B


A-86402629


4.25 lbs.

Lift Rod (LH)

For Models: (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D ALL 7/98>)

For Models: 1200 1/79>, (1110, 1210 ALL 1/83>)

A-SBA370910990

A-SBA370202391

5.62 lbs.

For Models: (1700, 1900 ALL 1/79>), (1710, 1910 ALL 1/83>) For Models: 2110 1/83>

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

127


Ford A-SBA370101190

Pull Arm (RH/LH)

17.87 lbs.

A-81821330

Lower Lift Arm (RH/LH)


Dim./Info: 34.646" Center Hole To Center Hole 3.504" Wide .709" Thick Rigid Forged Type Ends Cat.II Balls At Tractor & Implement Ends.

For Models: 1720 SN W/ STANDARD HITCH)

A-86524620

Pull Arm (RH/LH)

0.5 lbs.

Lift link ball (cat II)

0.5 lbs.

Dim./Info: 1.125 [Hole] 2.250" [O.D.] 1.375" WIDE For Models: 5000, 3000 1/65>, 2600 1/75>, 3610 1/81-12/82, 2610 1/814/83, 4610 1/81>, 4000 3 CYL. 1/65>

For Models: (TC35, TC40, TC45 ALL W/ ECONOMY HITCH) Lower Lift Arm, Cat. I (LH/RH)

A-C5NN557B

18.4 lbs.


A-D0NN555C

Ball, lift link (Cat II)

For Models: 5000, 3000 1/65>, 2600 1/75>, 3610 1/81-12/82, 2610 1/814/83, 4610 1/81>, 4000 3 CYL. 1/65>

For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL SN W/ STANDARD HITCH) Pull Arm (RH/LH)

A-C5NN557A

14.34 lbs.


A-86402634

31 lbs.

Replaces: D2NN555D

Dim./Info: 3/4" x 3 31.81 Center to Center

A-86402638

27.21 lbs.

For Models: 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700


A-SBA370101153

A-D2NN555E

16.68 lbs.

A-E1ADDN995233

Lift link ball, Cat I

Dim./Info: .875" ID 2.250" OD 1.367" WIDE

Replaces: D0NN555D

Dim./Info: 9/16" THICK 32" Ctr. Ball To Ctr. Ball Cat. I For Models: (2000, 2600, 3000, 3600 ALL 1965 To 1981), (600, 800 ALL 1955 To 1964)

0.4 lbs.

For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 4610 1/81>, 4000 3 CYL. 1/65>, 2000, 2810, 2910, 3055, 3120, 3300, 3400, 3500, 3910, 4000, 4110, 4610, 4830, 5000 1965>, 5030

A-E0NN557AA

Lift link ball, Cat I

1.11 lbs.

For Models: 4610 12/81>

128

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: 1720 SN UL27965> 10/89>, 1920 SN UP26442> 10/89>

A-SBA370100035

22 lbs.

Replaces: 82002004, C5NN555AL, C7NN555S


Ford A-E0NN557BA

Lift link ball, Cat II

1.05 lbs.

A-SA01

Dim./Info: .875" [hole] 31.562" [ctr to ctr] 33.500" OVERALL LENGTH .375" THICK 1.750" WIDE

For Models: 4610 12/81>

A-C5NNN557B

Lift Link Ball Retainer Spring

0.04 lbs. For Models: NAA, 600, 8N, 800, 9N

Dim./Info: DUAL CATEGORY

A-9N5375B


For Models: NAA, 600, 700, 8N, 800, 9N, 900

Dim./Info: 6.750" LONG .375" THICK 4 ROUND HOLES 2 SLOTTED HOLES

A-49B300R A-49B300L

Universal Economy Stabilizer Arm (RH) Universal Economy Stabilizer Arm (LH)

Dim./Info: .920" HOLE 31.500" CENTER TO CENTER 33.500" OVERALL LENGTH .375" THICK 2.00" WIDE

For Models: NAA, 600, 8N, 800, 9N

A-231253

9.9 lbs.

Heavy Duty Stabilizer Kit HEAVY DUTY ARMS & UNIVERSAL BRACKET

3.75 lbs. 3.75 lbs.

For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4110

A-C5NNN455C A-C5NN454C

4 lbs. 4 lbs.

Stabilizer Arm (LH) Stabilizer Arm (RH)

Dim./Info: CATEGORY I

For Models: NAA, 600, 8N, 800, 9N

A-231253

9.9 lbs.

Heavy Duty Stabilizer Kit HEAVY DUTY ARMS & UNIVERSAL BRACKET

For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4110

A-C5NN454B A-C5NNN455B

Stabilizer Arm (RH) Stabilizer Arm (LH)

7.4 lbs. 4 lbs.

Dim./Info: DUAL CATEGORY For Models: NAA, 600, 8N, 800, 9N

A-9N5374B

For Models: (2000, 2600, 3000, 3600, 4000, 4600 ALL W/ DRY BRAKES)

3 lbs.

Upper Stay Strap

A-49B450

Dim./Info: 30.750" OUTSIDE CENTERS 1.00" OUTER HOLE DIAMETER 26.187" INSIDE CENTERS .875" INSIDE HOLE DIA. .375" THICK 2.000" WIDE / 32.625 LONG

For Models: NAA, 600, 700, 8N, 800, 9N, 900

A-49B61R

Lower Stay Strap


2.64 lbs.

Dim./Info: PAINTED RED

For Models: NAA, 600, 700, 8N, 800, 9N, 900

A&I PRODUCTS

6.6 lbs.

Stabilizer Arm

Dim./Info: PAINTED BLUE 25.500" LONG .250" THICK 1.500" WIDE .937" HOLE .613" X 6.625" SLOT

fax: 1-800-511-0516

A-47P1050

Stabilizer Eyebolt Used To Repair 49A93 Chain Type Adjustable Stabilizer


Dim./Info: PAINTED BLUE 29.000" LONG .920" HOLE .250" THICK 1.500" WIDE .620" X 6.625" SLOT

4 lbs.

Stabilizer Arm Mounting Brkt.

UNIVERSAL BRACKET

3 lbs.

Lower Stay Strap

For Models: DEXTA, MAJOR, 3000, 4000, 5000

A-231254

5.88 lbs.

STAB. ARM CAT 1 .875" HOLE, 31.562" CTR TO CTR

0.1 lbs.

Dim./Info: 3/4" - 10 LH THREAD For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000, 765


1-800-657-4343

129


Ford A-C5NNN916B A-C5NND915B

Chain strap, (RH) Chain strap (LH)

0.05 lbs. 0.05 lbs.

Pin, center link

0.52 lbs.

For Models: 8N, 9N, (800, 900 ALL 1/53>), (3000, 5000 ALL 1/65>), (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 4000 4 CYL. 1/53>, 2000 4 CYL. 1/53>, 3 CYL. 1/65>, 4610 5/83>


A-C5NNA945C

A-957E560

Clevis, check chain

0.25 lbs.

A-C9NNB927A

Pin, center link (CatII)

1.1 lbs.

For Models: 3100 1/65>, (2600, 3600, 4600SU ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-D0NNA945A

Clevis, check chain

A-E0NNB927AB

Pin, center link (Cat I)

0.2 lbs.

0.3 lbs. For Models: 3610, 3610N 1/81-12/82, 2610 1/81-4/83

For Models: 4140, 4600SU, 4610SU, 3600 1/75>, 3610 1/81-12/82, 3000 4/70>

A-SBA344140121

Pin, Upper Lift Rod

0.4 lbs.

For Models: TC24D, (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D ALL 7/98>)

A-NCA563C

Pin, lower lift link

A-NCB563A

Pin, Lower lift link

A-C5NNF847A

Pin, center link, CATII

0.64 lbs.

1.05 lbs.

Dim./Info: 3.65" LONG For Models: NAA, 3000 1/65>, 3600 1/75, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 1/65>

A-SBA370911000

Top Link Pin

0.52 lbs.

Dim./Info: .750" [dia.] 2.75" [useable] 4.50" [overall]

0.82 lbs.

For Models: NAA, 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 8N, 800, 801, 900, 901

For Models: TC25D, TC30, TC35, TC35D, TC40, TC45, TC45D, 1710 1/85>, (1120, 1215, 1220, 1320, 1520, 1620, 1720, 2120, 3415 ALL 1/87>), 1715 1/93>, (1530, 1630, 1725, 1925 ALL 10/96>), (TC18, TC21, TC21D ALL 7/98>), (TC25, TC29, TC29D, TC33, TC33D ALL 9/98>)

A-C5NNN563A


1.02 lbs.

For Models: (800, 900 ALL 1/55>), (2000, 4000 ALL 4 CYL. 1/55>)

A-E4NNF537AA


2.4 lbs. For Models: 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-E0NN563CB


For Models: 5000 1/65>, 4000 3 CYL. 1/65>

A-D0NN563D

Pin, lower lift link Dim./Info: 5.970" Long 3/4" Thread

Stud, lift link hanger

For Models: (4000, 900 ALL 1/55>)

A&I PRODUCTS

fax: 1-800-511-0516

1.58 lbs.

Dim./Info: 5.880" Long 1" - 12 Thread

1.22 lbs.

For Models: 4610 1/81>, 5000 2/72>

A-D0NNA914B

Top Link End (Cat. II)

For Models: 4600SU, 3600 1/75>, 3610 1/81-12/82, 4610 1/81>, 4000 3 CYL. 3/70>

A-NCB521B

130

For Models: (3000, 5000 ALL 1/65>), 3600 1/75>, 3610 1/81-12/82

0.98 lbs.

4.75 lbs.

Dim./Info: 1 1/4" LH THREAD For Models: 2810, 2910, 3000, 3055, 3230, 3430, 3550, 3900, 3910, 3930, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 5000, 5100, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 4000 1965>


1-800-657-4343



Dim./Info: 4.00" LONG


Ford A-D0NN576B

Center link assy. (Cat I & II)

14.87 lbs.

Dim./Info: 23.5" - 30.00" adj. For Models: 4600SU, 4610SU, 3600 1/75-9/78, 3610 1/81-12/82, 4000 3 CYL. 1/65-6/71, 3000 4/70>

A-E0NN576DA

Center link assy, Cat I


0.49 lbs.

For Models: (2600V, 3600, 3600V ALL 1/75-8/77)

A-C5NN595B

Pin, leveling fork

0.24 lbs.

For Models: 3000 1/65>, (2600V, 3600, 3600V ALL 1/75>), 2610 1/81>

14.31 lbs.

A-C5NNN561A

Pin, check chain clevis

0.02 lbs.

Pin, clevis

0.16 lbs.


A-380221S36

For Models: 2910, 5000, 5600, 5610, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710

A-49A1BLUE A-49A1RED

TOP LINK, BLUE TOP LINK, RED

7.95 lbs. 8.16 lbs.

Dim./Info: .705" pin hole 1.125" thread 16" body 20.500"-29.00" adj.

For Models: 2810, 2910, 3055, 340A, 340B, 3550, 3900, 3910, 3910N, 3910V, 4000, 4110, 4110N, 4110V, 445A, 4600, 4610, 4610N, 4610V, 515, 532, 540A, 540B, 545A

A-APN582A

Stabilizer Clevis & Pin Used W/ CBPN598A - (Fits All Models , 2000 4 CYL. ROW CROP 1/53>

A-C5NN678A

For Models: 2810, 2910, 3000, 3055, 3550, 3910, 3930, 4000, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8210

A-D0NN582A

Clevis, check chain

0.04 lbs.

0.01 lbs.

Eyelet, Check chain (LH)

0.34 lbs.

For Models: 900, 800 1/55>, 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>, 4 CYL. 1/55>, 4000 4 CYL. 1/55>

A-C5NN667A

Eyelet, check chain (RH)


Center Link Assy. (Cat II)

Pin, leveling fork

11.48 lbs.

For Models: 3610 1/81-12/82, 2610 1/81-4/83

A-D0NN576A

A-C7NN595A

0.34 lbs.


A-D0NNA865A

Bushing, lower lift link

0.09 lbs. For Models: (800, 900 ALL 1/55>), 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>, 4000 4 CYL. 1/55>

For Models: 4600SU, 4610SU, 3600 1/75>, 3610 1/81-12/82, 4000 3 CYL 3/70>, 4610 5/83>

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

131


Ford A-NCB660A

Stabilizer eyelet

0.36 lbs.

A-CBPN598A

Stabilizer chain

0.88 lbs.

For Models: NAA, 1801, 2N, 2000, 4000, 600, 601, 700, 701, 8N, 800, 801, 9N, 900, 901

A-SBA370050250

For Models: 2N, 600, 700, 8N, 800, 9N, 900

A-NCA667A A-NCA678A

RH Stabilizer eyelet LH Stabilizer eyelet

1.5 lbs.

Rear Stabilizer Chain

Dim./Info: M16 x 1.5 RH M14 x 2.0 RH M14 x 2.0 LH

0.36 lbs. 0.38 lbs.

A-SBA370050240

Dim./Info: M18 x 1.5 RH M14 x 2.0 RH M14 x 2.0 LH

For Models: NAA, 2N, 2000, 2600, 3000, 3100, 3300, 3310, 3400, 3500, 4000, 600, 700, 8N, 800, 9N, 900

A-C7NNH840A

Eyebolt, check chain

2 lbs.


0.5 lbs.

For Models: 1920 SN

A-C5NNA947A

A-C5NNA948A

Eyelet, check chain (RH)

Eyelet, check chain (LH)

0.3 lbs.

Anchor check chain, RH Anchor, check chain LH

1.08 lbs.

Dim./Info: M16 x 1.5 RH 12.00" M14 x 2.0 RH

0.3 lbs.

For Models: (2600, 3000, 3600 ALL 1/65>), 3610 1/81-12/82, 2610 1/814/83, 2000 3 CYL. 1/65>

A-957E597 A-957E596


For Models: 1600 1/73>, (1200, 1700, 1900 ALL 1/79>), (1110, 1210, 1710, 1910 ALL 1/83>)

A-SBA370500950


0.64 lbs.

Dim./Info: M16 x 1.5 RH 6-3/4" M14 x 2.0 RH

0.38 lbs. 0.38 lbs.

For Models: TC30, 1715 1/93>, (1320, 1520, 1620 ALL 8/92>) For Models: NAA, 2600N, 2600V, 2610, 3000, 3600N, 3600V, 3610, 600, 8N, 800, 9N, 900, 2000 3 CYL.

A-C5NN596A

Anchor, check chain

A-SBA370050271


2.08 lbs.

Dim./Info: M18 x 1.5 RH 8-1/4" M16 x 2.0 RH M16 x 2.0 LH

1.42 lbs.

For Models: (2120, 3415 ALL 1/87>)

A-SBA370050310

Dim./Info: M18 x 1.5 RH 13-1/4" M14 x 2.0 RH M14 x 2.0 LH

For Models: 3000 1/65>, (2600N, 3600 ALL 1/75>), 3610N 1/81-12/82, 2310 3 CYL. 1/65>

A-D2NN581A

Anchor, check chain

2.2 lbs.


3.5 lbs.

For Models: 1920 SN UP26442> 10/89>, 1720 9/89>

A-SBA370500490


A-D2NN581B

Anchor, check chain


0.58 lbs.

Dim./Info: M18 x 1.5 RH 6.00" M14 x 2.0 RH

7.4 lbs.

for use w/ large tires

For Models: (1300, 1500 ALL 1/79>), (1310, 1510, 1710 ALL 1/83>), (1120, 1215, 1220 ALL 1/87>), (TC18, TC21, TC21D, TC24D ALL 7/98>) For Models: 5000 6/73>

132

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



For Models: (1320, 1520, 1620 ALL 1/87 - 7/92)


Ford A-SBA370500920


1.92 lbs.

Dim./Info: M16 x 2.0 RH 11.00"

Stabilizer, Tractor End

0.92 lbs.

Stabilizer Chain W/ Eyebolt

0.15 lbs.

Dim./Info: RH THREAD For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000, 765

A-47P1053

0.92 lbs.

Stabilizer Clevis W/ Pin

0.63 lbs.

Used To Repair 49A93

Dim./Info: 9-5/16" M14 X 2.0 LH For Models: (1720, 1920 ALL 1/87>) For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000, 765

A-SBA370500530

Stab. Chain (Tractor End)

1.36 lbs.

A-47P1049

Center Tube, Stabilizer Used To Repair 49A93 Chain Type Stabilizer

Dim./Info: 10-1/4" M16 x 2.0 LH

0.8 lbs.

For Models: (2120, 3415 ALL 1/87>)

A-SBA370500800

0.7 lbs.


Dim./Info: 7-3/8" M14 x 2.0 LH

For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000

A-CFPND936B

Stabilizer chain

8.3 lbs.

For Models: 1710O 1/85>

A-SBA370500930

0.8 lbs.


Dim./Info: 6-1/4" M16 x 2.0 LH

For Models: 3055, 4600, 5000, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710


A-957E591 A-SBA399160220

Turnbuckle, Stab. Chain

Dim./Info: M16 x 2.0 RH-LH

For Models: 2600N, 2600V, 3600V, 2000 3 CYL.


A-SBA399160190

A-C5NN591D Turnbuckle, Stab. Chain

0.68 lbs.

Check chain

0.73 lbs.

0.3 lbs.

Check chain

0.73 lbs.

Dim./Info: M14 x 2.0 RH-LH

For Models: 2600N, 2600V, 3600V

A-E0NN591AA

For Models: (1300, 1500, 1700, 1900 ALL 1/79>), (1310, 1510, 1710, 1910 ALL 1/83>)

A-49A93

Chain Type Adjustable Stabilizer 13.6 lbs. 1 SET OF 2 STABILIZERS FOR FORD TRACTORS HAVING AN EXTRA LINK WHICH ALLOWS EASY ATTACHMENT TO LARGEAND SMALL MODEL TRACTORS BY UNCOUPLING THE CLEVIS AND PIN AND MOVING UP OR DOWN ONE LINK OF THE STABILIZER ACCORDINGLY.

0.3 lbs.

Check chain



A-47P1052 Used To Repair 49A93

For Models: TC24D, TC30, (1200, 1300, 1500, 1700, 1900 ALL 1/79>), (1110, 1210, 1310, 1510, 1710, 1910 ALL 1/83>), (1120, 1215, 1220, 1320, 1520, 1620 ALL 1/87>), 1715 1/93>, (TC18, TC21, TC21D ALL 7/98>)


3.6 lbs.


Dim./Info: 6.00" M14 x 2.0 RH

A-SBA370500510

ADJUSTABLE COMPACT STABILIZER Used for Compact Tractors

Dim./Info: 15.500" - 19.500" adj.


A-SBA370500500

A-VPL3232

For Models: 3610N 1/81-12/82, 3600N 4/81>

A-D2NNA946B

Check chain

1.25 lbs.

For Models: DEXTA, SUPER DEXTA, 2000, 3000, 4000, 5000, 765

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

133


Ford Dim./Info: 12" For Models: 4610 1/81>, 4000 3 CYL 1/65>

A-C7NN591A

Check chain

A-49A800

2.94 lbs.

Dim./Info: 8.5" For Models: 4610 1/81>

A-FP165

Dim./Info: 25.25" extended / 19.5" closed [length] 25 1/4" EXTENDED 19 1/2" CLOSED PAINTED PRIMER RED For Models: FITS SEVERAL MODELS

A-D9NNB856BB

Complete Stabilizer Assy. Kit includes: key parts 2 thru 11 plus 16 Check chain clevis kit

12.28 lbs.

0.12 lbs.

For Models: 2310, 2600N, 3000, 3600, 3600N, 4000, 8N, 9N, 900

A-C5NN591F

Check chain l/clevis

0.75 lbs.


A-E1NNR837AA

Nut, check chain adjusting

2.3 lbs.

For Models: 2000 3 CYL. 10/69>

A-230044

Stabilizer Pin

0.3 lbs.

Dim./Info: .625"-11 X 2.625" THREAD .875" PIN DIAMETER 2.625" LONG .500" PIN HOLE For Models: NAA, 600, 8N, 800, 9N

A-HD58LW

WASHER 5/8" LOCK Used W/ 181777M1 Stabilizer Pin

0.1 lbs.

A-D9NNR831AA A-D9NNN873BA A-D9NNP999BA A-D9NNP997AA A-D9NNR833BB A-D9NNN873AA A-D9NNR832BA A-D9NNA931BA A-58747S36 A-34992S7 A-C5NN16N321A A-33850S36 A-C7NND933B A-C7NND932B A-304898S36

Ref 2 - Coupling Ref 3 - Pin Ref 4 - Bar Assy. Ref 5 - Pin Ref 6 - Tube Assy. Ref 7 - Pin Ref 8 - Shackle Ref 9 - Spacer Ref 10 - Bolt Ref 11 - Nut Ref 12 - U-bolt Ref 13 - Nut Ref 14 - RH bracket Ref 15 - LH bracket Ref 16 - Bolt

1.21 lbs. 0.16 lbs. 3.34 lbs. 0.44 lbs. 4.22 lbs. 0.4 lbs. 1.22 lbs. 0.02 lbs. 0.52 lbs. 0.11 lbs. 1.72 lbs. 0.07 lbs. 6.94 lbs. 7.12 lbs. 0.11 lbs.

For Models: 2910, 3910, 4110

Dim./Info: 5/8" For Models: NAA, 600, 8N, 800, 9N

134

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



Check chain

38.75 lbs.

0.82 lbs.

For Models: 4610SU, 3000 1/65>, (2600, 3600 ALL 1/75>), 3610 1/81-12/82, 2610 1/81-4/83, 2000 3 CYL. 1/65>

A-D2NNA946A

Universal Stabilizer Kit

PAINTED: PRIMER RED


Ford A-D9NNB856AA

Complete Stabilizer Assy. Kit includes: key parts 2 thru 11, plus 16

13.02 lbs.

A-SBA370710110

19.2 lbs.

Drawbar (Swinging)

Dim./Info: 2.500" Wide 1.000" Thick 28.620" Long For Models: (1300, 1500 ALL 1/79>), (1310, 1510, 1710 ALL 1/83>)

A-SBA370710030

25 lbs.

Drawbar (Fixed)

Dim./Info: 2.380" Wide 1.120" Thick 33.750" Long


A-SBA370700031 A-D9NNR831AA A-D9NNN873BA A-D9NNP999AA A-D9NNP997AA A-D9NNR833AA A-D9NNN873AA A-D9NNR832BA A-D9NNA931BA A-58747S36 A-34992S7 A-388838S36 A-33850S36 A-C7NND932A A-C7NND933A A-304898S36

Ref 2 - Coupling Ref 3 - Pin Ref 4 - Bar Assy. Ref 5 - Pin Ref 6 - Tube Assy. Ref 7 - Pin Ref 8 - Shackle Ref 9 - Spacer Ref 10 - Bolt Ref 11 - Nut Ref 12 - U-bolt Ref 13 - Nut Ref 14 - LH bracket Ref 15 - RH bracket Ref 16 - Bolt

1.21 lbs. 0.16 lbs. 3.34 lbs. 0.44 lbs. 5.16 lbs. 0.4 lbs. 1.22 lbs. 0.02 lbs. 0.52 lbs. 0.11 lbs. 1.9 lbs. 0.07 lbs. 8.76 lbs. 8.38 lbs. 0.11 lbs.

Dim./Info: 2.930" Wide 1.000" Thick 32.060" Long For Models: (1700, 1900 ALL 1/79>), (1910, 2110 ALL 1/83>)

A-SBA370710290

Drawbar Lock (Cat. I) FOR CAT 1 DRAWBAR (PREVENTS DRAWBAR FROM ROTATING)

4 lbs.

18 lbs.

Drawbar (Swinging)

Dim./Info: 2.375" Wide 1.130" Thick 25.370" Long For Models: (1320, 1520, 1620, 1715 ALL 1/87>)

A-SBA370710180

20 lbs.

Drawbar


For Models: 5610, 6610, 6710, 7610, 7710, 8210

A-49A29

26 lbs.

Drawbar (Swinging)

For Models: (1720, 1920, 2120, 3415 ALL 1/87>)

A-SBA370710260

34.68 lbs.

Drawbar

Dim./Info: 2.350" Wide 1.190" Thick 23.500" Long For Models: FITS SEVERAL MODELS

A-49A34R

For Models: TC30, 1320, 1520, 1620, 1715, 1720, 1920, 2120, 3415

Swinging Drawbar Kit

34 lbs.

A-86402585

19 lbs.

Drawbar

COLOR: RED

Dim./Info: 2.380" Wide 1.180" Thick 25.250" Long For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D ALL SN G033361> W/ DELUXE HITCH), (TC35, TC35D, TC40, TC40D, TC45, TC45D ALL SN G508566> W/ DELUXE HITCH)

A-49B70R A-49B71R A-49B73R A-49B74

Drawbar Rear Drawbar Hanger Drawbar Clevis Assembly Drawbar Clevis Pin

16 lbs. 11 lbs. 4 lbs. 0.5 lbs.

A-86402762


For Models: 1600 1/73>, (1700, 1900 ALL 1/79>), (1910, 2110 ALL 1/83>)

19 lbs.

Drawbar


For Models: NAA, 600, 8N

For Models: (TC25, TC25D, TC29, TC29D, TC33, TC33D, TC35, TC35D, TC40, TC40D, TC45, TC45D ALL W/ DELUXE HITCH), (1530, 1630, 1725, 1925 ALL 10/96> W/ DELUXE HITCH)

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

135


Ford NEW! A-5128655

A-C5NN805F 22 lbs.

Drawbar

Drawbar w/ 2.750" offset 23 lbs. (4) .937" dia. front holes @ 1.343", 3.343", 5.718", & 7.718" from front.

Dim./Info: 34.625" long 2." wide, 1.250" high

Dim./Info: 29.50" Overall Length 2.37" Wide 1.187" For Models: 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90 Drawbar (Swinging)

16.15 lbs.


A-E4NN807AA

Front drawbar pin

A-E0NN805AC

Straight Drawbar 34 lbs. (3) 1.165" dia holes @ 1.250", 3.250", & 7.750" from front, 3rd hole allows more application than OEM's drawbar.

For Models: TC30

A-VPL4434

Dim./Info: 36.900" long 2.5" wide, 1.375" wide

19.3 lbs.

Drawbar

Dim./Info: 28" [length] 1.250" [thick] 2" [width] 25.5" [ctr to ctr]

A-C7NN807C

Front drawbar pin

A-C5NN805FSPL

Straight Drawbar 23 lbs. (4) .937" dia holes @ 1.343", 3.343", 5.718", 7.718" from front. Note: OEM's drawbar for this application has 2.750" offset, A&I's is straight.

A-E3NN805AA12B

Hvy Duty Drawbar (2) 1.141" dia. holes @ 1.125" & 2.750" from front.

Front drawbar pin

0.54 lbs.

For Models: 2600, 3600, 3900, 4600, (515, 532 ALL IND)

A-C7NN807A

Front drawbar pin

Drawbar w/ 1.500" offset 18.5 lbs. (3) .913" dia. Front holes @ 1.375", 3.375", & 9.375" from front

A-C5NN805A

Drawbar (2) 1.156" dia. front holes @ 1.250" & 7.250" from front.

Dim./Info: 32.875" long 1.875"wide, 1.125"high

Drawbar w/ 2.750" offset (2) .922" dia. front holes @ 1.375" & 5.750" from front.

29 lbs.

Dim./Info: 34.750" long 2.250"wide, 1.375"high

0.54 lbs.

For Models: 2600, 2610, 3100, 3600, 3610, (2000, 3000 ALL W/ SWINGING), 4110 W/ SWINGING OR W/O CLEVIS, (2810, 2910, 3910, 4610 ALL W/O CLEVIS), (3230, 3430, 3930, 3930H, 4130, 4630, 4830 ALL 7-90->), 5030 9/92->

A-C5NN805J

1.01 lbs.

For Models: 8160, 8210, 8260, 8360, 8560, TS100, TS110, TS115, TS90

A-C5NN805C

Front drawbar pin

46 lbs.



A-E4NN807AA

0.95 lbs.

For Models: 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210


A-E4NN807AA

0.54 lbs.

For Models: 3900, 4600, 4000 W/ 540/1000 PTO 65->

22.5 lbs.

A-C7NN807C

Front drawbar pin

0.95 lbs.

For Models: 7100, 7200, (5000, 7000 ALL 65-6/73)

NEW! A-5180877

33 lbs.

Drawbar

Replaces: 82010175, 82004690

Dim./Info: 30.62" Overall Length 2.375" Wide 1.58" High


For Models: 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90 A-E4NN807AA

Front drawbar pin

0.54 lbs.

For Models: (2810, 2910, 3910, 4110, 4600, 4610 ALL W/ CLEVIS), 4000 W/ 540 RPM PTO, (3230, 3430, 3930, 3930H, 4130, 4630, 4830 ALL 7/90->), 5030 9/92->

136

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



A-SBA370710510


Ford A-E9NN805AA

Drawbar 34 lbs. (3) 1.156" dia. front holes @ 1.250", 3.250", & 7.750" from front.

A-C7NN807B

Drawbar Front Pin

1.19 lbs.

Dim./Info: 36.250" long 2.250"wide, 1.625"high For Models: (4000, 5000 ALL 1965>), (5600, 5700, 6600, 6700, 7600, 7700 ALL 1975>)


Front drawbar pin

Front Drawbar Pin

1.21 lbs.

Dim./Info: 3.875" O.D.

For Models: (7840, 8240, 8340 ALL STD / TOW HOOK), (5640, 6640, 7740 ALL 11-91-> STD / TOW HOOK)



47.5 lbs.

Dim./Info: 42.500" L 3.000" W, 1.375" H

For Models: TS100, TS110, TS115, TS90, 5110, 5610, 5640, 6410, 6610, 6610O, 6640, 6640O, 6810, 7610, 7610O, 7710, 7740, 7740O, 7840, 7840O, 8160, 8210, 8240, 8260, 8340, 8360, 8560

NEW! A-TLH01

Hydraulic Top Link Cylinder, Cat. I, (2" Bore) 12.3 lbs.

Replaces: Gannon 13-650 A-D8NN807AA

Front drawbar pin

1.17 lbs.

For Models: 8700, 8830, 9700, (TW5, 7810, 7910, 8210, 8530, 8630, 8730 ALL 3/90->), (TW10, TW20, 8000, 9000 ALL 9/69->)

A-C7NN805A

All Ports 9/16"-18 ORB W/ Two Adapters 9/16"-18 ORBM X 1/4" NPTM 90 Degree Swivel

Dim./Info: 8" Stroke Length, 2" Cylinder Bore 20" Closed Length 12 7/16" Barrell Length 3/4" Rod End Ball I.D. 1 3/4" Rod End Ball Width 3/4" Base End Ball I.D.

36 lbs.


Dim./Info: 41.750" L 2.250" W, 1.375" H

For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

NEW! A-TLH02 A-D8NN807AA

Front drawbar pin

1.17 lbs.

9.5

Replaces: Gannon 13-762

For Models: (TW10, 8000, 9000 ALL 1/69-8/69)

A-C7NN805C

Hydraulic Top Link Cylinder, Cat. I, (2" Bore) lbs.

47 lbs.

Drawbar

All Ports 9/16"-18 ORB W/ Two Adapters 9/16" -18 ORBM X 1/4" NPTM 90 Degree Swivel

Replaces: 86509813

Dim./Info: 5" Stroke Length, 2" Cylinder Bore 15" Closed Length 9" Barrell Length 3/4" Rod End Ball I.D. 1 3/4" Rod End Width 3/4" Base End Ball I.D.

(2) 1.141" dia front holes @ 1.125" & 2.750" from front.

Dim./Info: 41.750" long 3.000" W, 1.375" H

For Models: FITS SEVERAL MODELS Check Dimensions For Your Application A-C7NN807A

Front drawbar pin

1.01 lbs.

For Models: (TW10, TW20, TW30, 8000, 9000 ALL 1/69-8/69)

A-D8NN805AA

NEW! A-49A317

3-PT HITCH, FD

85 lbs.

64 lbs.

Drawbar

Replaces: D5NN805AA

(2) 1.172" dia front holes @ 1.125" & 5.750" from front.


A-D3NN805A

1.25 lbs.

Dim./Info: 47.250" long 3.000" W, 1.625" H

A-D8NN807AA

Front drawbar pin

1.17 lbs.

For Models: TW35, TW30 79->, 8830 83->

A&I PRODUCTS

fax: 1-800-511-0516

For Models:


1-800-657-4343

137


Ford NEW! A-TLH04

Hydraulic Top Link Cylinder, Cat. I Rod / Cat. II Base, (3" Bore) 17.9 lbs.



Dim./Info: 8" Stroke Length, 3" Cylinder Bore 22" Closed Length 12 7/16" Barrell Length 3/4" Rod End Ball I.D. 1 3/4" Rod End Ball Width 1" Base End Ball I.D.

Dim./Info: 8" Stroke Length, 3" Cylinder Bore 20" Closed Length 12 7/16" Barrell Length 3/4" Rod End Ball I.D. 1 3/4" Rod End Ball Width 1" Base End Ball I.D.


NEW! A-SLH01


Hydraulic Side Link Cyl., Cat.0 Base End W/Clevis Rod End, (2" Bore) 0 lbs.



Hydraulic Top Link Cylinder, Cat. 1 Rod / Cat. II Base, (3" Bore) 16.72 lbs.



138

NEW! A-TLH03

Replaces: Gannon 13-550, 13-599, 13-604, 13-780


Dim./Info: 4" Stroke Length, 2" Cylinder Bore Closed Length Adjustments Of 15 1/2", 16 1/2" & 17 1/2" 8 7/16" Barrell Length 5 5/8" Clevis Depth, 7/8" Clevis Width, All Clevis Holes Drilled For 5/8" Pin 3/4" Base End Dia., 1 3/8" Base End Width 3 7/8" Base To Ball Center Length For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

NEW! A-SLH02

Hydraulic Side Link Cylinder, Clevis Ends, (3" Bore) 16.71 lbs.



Dim./Info: 4" Stroke Length, 3" Cylinder Bore Closed Length Adjustments Of 19 1/2", 21 1/2", 26" & 27 1/4" 8 7/16" Barrell Length 3/4" Clevis Rod Width Clevis Base: 5/8" Hole, 2" Width & 2" Depth Clevis Rod Holes: 3/4"Upper Hole, LowerThree Holes 5/8" For Models: FITS SEVERAL MODELS Check Dimensions For Your Application

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


Ford A-C5NN16450H

5.76 lbs.

Foot board

A-C5NN16312AA

Fender w/ bracket RH/LH

21.36 lbs.

Dim./Info: 11" long 20.5" wide For Models: 2000, 3000

A-C7NN16451D

5.06 lbs.

Foot board

Dim./Info: 20.5" long 10.560" wide

A-E1NN16315DA

Fender less bracket RH/LH Same fender as above but less bracket.

For Models: 2100, 2150, 233, 2600, 3100, 3120, 3150, 3600

A-D5NN16472C

RH Running Board

For Models: 2000, 2600, 2610, 3000, 340A, 3600, 3610, 420, 445A, 4500, 535, 540A, 540B, 545, 600, 800

15.55 lbs.

5.28 lbs.

Dim./Info: 20.5" long 8.5" wide

For Models: JUBILEE, 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800

For Models: 2000, 2600, 3000, 3600, 5600, 6600, 7600

A-D3NN16451D

LH Running Board

4.84 lbs.

A-E5NN16313DA A-D8NN16312ABB

35 lbs. 35 lbs.

Fender, LH Fender, RH

Dim./Info: 20.5" long 8.5" wide For Models: 2000, 2600, 3000, 3600, 5600, 6600, 7600

NEW! A-957E16312A NEW! A-957E16312C

Fender (RH)

23.21 lbs.

Fender (LH)

26.44 lbs.

For Models: 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610, 4100

A-D3NN16N319C

Fender bracket LH/RH

31.3 lbs.

For Models: (DEXTA, SUPER DEXTA ALL W/O Electrical Lighting)

A-C0NN16312A

Fender w/ bracket RH/LH

21 lbs.

Replaces: C5NN16312AK, C5NN16312AU

For Models: 2810, 2910, 3910, 4600, 4610, 4630, 4830, 5030, 5600, 5610, 6600, 6610, 7600, 7610

A-RW08244

Rear Wheel Rim, 8X24"

33 lbs.

rear rims / fenders / etc.


Replaces: D4NN16472B

For Models: NAA, 2N, 8N, 9N

A-C0NN16312SK

Fender less bracket RH/LH Same fender as above but less bracket.

19 lbs.

For Models: ALL MODELS USING 8X24 REAR RIM W/4 LUGS

For Models: NAA, 2N, 8N, 9N

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

139


Ford A-RW09286

Rim, 9X28 Rear Wheel

49 lbs.

A-RW12246


52 lbs.

Replaces: NCA1020C, 1882978M91

Dim./Info: 6 Lug

For Models: ALL MODELS, 8N SN 290271>

A-RW12286


A-RW09244

Rear Wheel Rim, 12X28

REAR WHEEL RIM

Dim./Info: 6 Lug

36.38 lbs.

Dim./Info: 9" X 24" 4 LOOP CLAMP


A-RW13286


A-RW10244


RIM, REAR 13 X 28 6-LUG

64.03 lbs.

Dim./Info: 13" X 28" 6-LUG

42 lbs.

Dim./Info: 4 Lug 10"x24"


A-RW12368


A-RW10286



87.8 lbs.

52 lbs.


A-RW13288


A-RW11286


65 lbs.

Replaces: 1884942M91, 1883122M92


55 lbs.

Dim./Info: 8 Lug


Replaces: 897137M92


140

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343



58 lbs.

Replaces: D9NN1050EA


Ford A-RD28642

Rear Wheel 8 hole Disc 28"

61.5 lbs.

Replaces: C5NN1036D

A-SD58

STUD BOLT 5/8"X 2 1/2" (10PCS/BAG) 2.32 lbs.

42 Knurls-Plain

Dim./Info: 8 Bolt

Dim./Info: A: 2.250" B: .672" C: .683" 5/8"-18 THREAD SIZE For Models: 2000, 2600, 3000, 3600, 3610

For Models: ALL MODELS USING DISC W/6 BOLT ON 4.250" CENTER

A-RD28606

62 lbs.

Rear Wheel 8 hole Disc 28"



Dim./Info: 8 Bolt

For Models: ALL MODELS USING DISC W/6 BOLT ON 8" CENTER

A-D3NN1120B

Rear Wheel Nut Used W/ C5NN1N118J Bolt

0.33 lbs.

Dim./Info: 3/4" - 16 X 1 1/2" HEX For Models: MAJOR, SUPER MAJOR, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710

A-C5NN1N118J

Rear Wheel Bolt 4.1 lbs. Bolt Has Extra Thread Length And Can Replace C5NN1N118H Bolt For 8 Bolt Wheel.

For Models: MAJOR, SUPER MAJOR, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710

A-9N1117

BOLT,CENTER DISC TO AXLE

0.22 lbs.

For Models: 2N, 9N

A-C5NN1120F

Rear Wheel Nut, Used W/ C5NN1117R Bolt

0.05 lbs.

For Models: 2000, 2600, 2620, 3000, 3600, 3610

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

141


Ford A-8N16612

35 lbs.

Hood

A-D5NN16626B

Hood, Engine LH

12.66 lbs.


For Models: 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610 For Models: 8N, 9N

A-C7NN16625M A-C5NN16625F

Hood, Engine RH

Hood, Engine RH

9.34 lbs.

Dim./Info: 31" long

Dim./Info: 31" long

For Models: 3600, 3610 For Models: 4000 3 CYL 1/65-12/74

A-C7NN8A067A

A-D7NN16626A

Hood, Engine LH

0.01 lbs.

Grille Clip

9.2 lbs.

Dim./Info: 31" long


A-C7NN16626G

Hood, Engine LH

12.48 lbs.


For Models: 4140, 4600, 4610

A-C5NN16N631B

0.31 lbs.

Hinge

For Models: FITS SEVERAL MODELS For Models: 5100, 6600

A-D3NN16626L

A-C5NN16N655A Hood, Engine LH

For Models: TW10, TW15, TW20, TW5, 2100, 2610, 2910, 3055, 3100, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4600, 4610, 4830, 5030, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7910, 8000, 8210, 8700, 9700

A-D6NN16N644A

For Models: 3600, 3610 Hood, Engine RH


For Models: 5100, 5600, 6600, 7100, 7600

0.01 lbs.

9.3 lbs.

Dim./Info: 31" long

A-D5NN16N768B

Rubber Hood Support

Bonnet Handle

0.2 lbs.

12.66 lbs. For Models: 2310, 2600N, 3310, 335, 3600N, 420, 4400, 4410, 445, 4500, 4830, 5030, 5110, 515, 5200, 532, 540, 545, 5610, 5900, 6410, 6600, 6610, 6810, 7200, 7600, 7610, (345C, 445C ALL 12/88-), 3400 65-74, 3550 68-69, 340 75-81, (345D, 445D ALL 9/92-)

A-8N16618A

Side Panel (RH)


142

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343

6 lbs.


hoods/grilles/screens/etc.

9.29 lbs.


Ford A-8N16619

6 lbs.

Side Panel (LH)


A-C3NN16652B

A-8N9661

Air Cleaner Door

1 lbs.

Air Cleaner Door

0.4 lbs.

For Models: 8N Front Lower Side Panel (RH)

3.78 lbs.

A-NAA9661B

For Models: NAA, 600, 700, 800, 900, (2000, 4000 ALL W/ LOW PROFILE CAB & DOOR HINGED FROM REAR)

Replaces: 81865244, 83995319

Tinted

Dim./Info: A: 50.787" B: 28.346" C: 13.386" D: 37.402" E: 13.386" F:28.346"

A-E4NN94201N18AA Cab Door Strut

Rear Window

1.54 lbs.

Replaces: 83952266

Dim./Info: 200MM Overall Length 65MM Piston Stroke 18MM Cylinder Dia. 8MM Rod Dia. Ball And Socket On Both Cyl. & Rod Ends.

For Models: (5640, 6640, 7740, 7840, 8240, 8340 ALL W/ SuperLux Cab), 8160 W/ SuperLux Cab, 8240 11/1995> W/ SuperLux Cab, 8260 W/ SuperLux Cab, 8340 11/1995> W/ SuperLux Cab, (8360, 8560, TS100, TS110, TS80, TS90 ALL W/ SuperLux Cab)

A-F0NN9442038BA Rear Cab Window

Dim./Info: A: 58.00" B: 28.00" C: 13.00" D: 37.00" E: 13.00" F: 28.00"

50 lbs.

Dim./Info: A: 26.50" B: 58.00" C: 16.00" D: 34.00" E: 31.00"

51 lbs.

50 lbs.

For Models: (TW15, TW25, TW35, TW5, 5610, 5900, 6410, 6610, 6810, 7410, 7610, 7710 ALL 10/1985> W/ SUPER Q CAB), (3230, 3430, 3930, 3930H, 4130, 4630, 8530, 8630, 8730, 8830 ALL 3/1990>), 4830 7/1990>

Dim./Info: A: 59.06" B: 35.75" C: 0.18"

For Models: (5640, 6640, 7740, 7840 ALL 11/1995> W/ SuperLux Cab), (TS100, TS110, TS80, TS90 ALL W/ SuperLux Cab), 8160 D3814> W/ SuperLux Cab, 8240 11/1995> W/ SuperLux Cab, 8260 D3814> W/ SuperLux Cab, 8340 11/1995> W/ SuperLux Cab, (8360, 8560 ALL D3814> W/ SuperLux Cab)

148

A&I PRODUCTS

fax: 1-800-511-0516


1-800-657-4343


hoods/grilles/screens/etc.

For Models: (5640, 6640, 7740, 7840 ALL 11/1995> W/ SuperLux Cab), 8160 W/ SuperLux Cab, 8240 11/1995> W/ SuperLux Cab, 8260 W/ SuperLux Cab, 8340 11/1995> W/ SuperLux Cab, (8360, 8560, TS100, TS110, TS80, TS90 ALL W/ SuperLux Cab)


Ford A-E2NN9444000AA REAR WINDOW GAS STRUT

0.7 lbs.

Replaces: 83932024

0.2 lbs.

Emblem Set

Replaces: C5NN16N607M, C5NN16605AB

Dim./Info: 19 11/16" Overall Length 8 7/8" Piston Stroke 11/16" Cylinder Dia. 5/16" Rod Dia. Ball & Socket On Both Rod And Cylinder Ends For Models: 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3610, 3910, 3910H, 3930, 3930H, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 5900, 6410, 6610, 6810, 7610

NEW! A-D7NN94303N04A REAR WINDOW STRUT

For Models: 5000

A-VPM2053

0.38 lbs.

Emblem Set

Replaces: EBPN16605GA, 83928793

For Models: 6610 Date

Tractor Parts - Ford - Rick's Ag Parts

Tractor Parts - Ford - Rick's Ag Parts

Suggest Documents

Ford Tractor Parts Catalog - Cross Creek Tractor [PDF]

ford 12 a.FH9 - Rick's Ag Parts

Kern Co. Tractor Parts

Tractor Parts Catalog

CRaNKSHaFTS - Costex Tractor Parts

NEW! Tractor Parts - Modernusa.com

Ford Parts and Accessories

Coyote - Ford Performance Parts

Ford Motorcraft Carburetor Parts

Catalog: Tractor Parts - Ford / New Holland - Garage Robert Carrier ...

Ford-New Holland Tractor Front Axle & Steering Parts - Powell ...

Tractor Parts: Ford-New Holland-Oil Filters-Fuel Filters ...

Yesteryear Ford Parts

Yesteryear Ford Parts

Chart - Ford Racing Parts

Ford-New Holland Tractor Front Axle & Steering Parts - Powell ...

Ag Parts Catalog

FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE

Tym Tractor Parts Manual - pdfsdocuments.com

NATIONAL TRACTOR PARTS DEALER ASSOCIATION

Vintage Tractor Parts (39-64)

Two-Wheel Tractor Parts Manual

Beaded Gaskets - Costex Tractor Parts

DYNAMOMETER TESTING AND FORD ... - Ford Racing Parts