Update Standards - August 2006 - BSI Shop

32 downloads 13029 Views 298KB Size Report
31 Aug 2006 ... 4. The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in 'New Work. Started'.

British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

Building and civil engineering BS 598.................................................................22 BS 1197...............................................................29 BS 5268.................................................................6 BS 5400...............................................................19 BS 5649...............................................................29 BS 6911...............................................................22 BS 8110...............................................................25 BS EN 40 .............................................................29 BS EN 534 .............................................................6 BS EN 934 ...........................................................19 BS EN 1454 ...................................................14, 29 BS EN 1457 .........................................................19 BS EN 1993 ...................................................39, 40 BS EN 13084 .......................................................20 BS EN 13161 .......................................................20 BS EN 14227 .......................................................11 BS EN 14246 .......................................................11 BS EN 14316 .......................................................41 BS EN 14317 .......................................................41 BS EN 14383 .......................................................11 BS EN ISO 19432 ...........................................14, 29 BS ISO 11886 ......................................................21 BS ISO 21507 ......................................................18 DD CEN/TS 14418 ...............................................11 DD CEN/TS 15364 ...............................................12 DD CEN/TS 15397 ...............................................12

Consumer products and services BS 2049...............................................................23 BS 3300...............................................................23 BS 4285...............................................................29 BS 4540...............................................................30 BS 4585.........................................................30, 31 BS 4737...............................................................29 BS 5665...............................................................19 BS 7328...............................................................27 BS 7407...............................................................27 BS EN 71 .............................................................19 BS EN 1143 .........................................................25 BS EN 1183 .........................................................25 BS EN 1184 .........................................................25 BS EN 1217 .........................................................25 BS EN 1388 .........................................................25 BS EN 1541 .........................................................23 BS EN ISO 8261 .............................................20, 29 BS EN ISO 11145 .................................................10 BS EN 12079 .......................................................10 BS EN 12710 .......................................................11 BS EN 12875 .......................................................26 BS EN 13592 .......................................................20 BS EN 13676 .......................................................24 BS EN ISO 14880 ...........................................12, 20 BS EN ISO 17375 .................................................12 BS EN 60335 .....................................14, 21, 22, 30 BS ISO 29 ............................................................30 BS ISO 1189 ........................................................26 BS ISO 1496 ........................................................23 BS ISO 3639 ........................................................26 BS ISO 3775 ........................................................30 BS ISO 4241 ........................................................26 BS ISO 6036 ........................................................26 BS ISO 12608 ......................................................26 BS ISO 17332 ......................................................26 BS ISO 18185 ......................................................18 BS ISO 22234 ......................................................18 DD 254................................................................28 BIP 0008 ..............................................................19 BIP 0009 ..............................................................19 KIT 191................................................................19

4

Electrotechnical BS 159.................................................................25 BS 1376...............................................................25 BS 4533...............................................................19 BS 4584 ............................................27, 28, 29, 30 BS 4808...............................................................27 BS 5225...............................................................25 BS 5425...............................................................29 BS 5691.........................................................14, 29 BS 6493...............................................................18 BS 6626...............................................................25 BS 6867...............................................................25 BS 6878...............................................................25 BS 6904...............................................................25 BS 8434...............................................................14 BS 9612 N007 .....................................................27 BS 9620...............................................................26 BS 9751 N0001 ...................................................25 BS EN 50083 .................................................16, 20 BS EN 50117 .................................................20, 29 BS EN 50125 .......................................................31 BS EN 50149 .......................................................21 BS EN 50200 .......................................................14 BS EN 50342 .......................................................22 BS EN 50366 .......................................................22 BS EN 60076 .......................................................14 BS EN 60079 .......................................................21 BS EN 60204 .......................................................14 BS EN 60216 .................................................14, 29 BS EN 60249 ...............................15, 27, 28, 29, 30 BS EN 60282 .......................................................14 BS EN 60317 .......................................................22 BS EN 60335 .....................................14, 21, 22, 30 BS EN 60384 .................................................14, 30 BS EN 60432 .......................................................21 BS EN 60439 .......................................................21 BS EN 60464 .......................................................22 BS EN 60598 .................................................15, 21 BS EN 60603 .......................................................22 BS EN 60704 .......................................................15 BS EN 60728 .................................................16, 20 BS EN 60730 .......................................................23 BS EN 60745 .......................................................21 BS EN 60770 .......................................................15 BS EN 60794 .......................................................15 BS EN 60950 .................................................15, 21 BS EN 61011 .......................................................30 BS EN 61212 .......................................................15 BS EN 61249 .....................................15, 21, 28, 30 BS EN 61280 .......................................................21 BS EN 61307 .......................................................15 BS EN 61326 .......................................................15 BS EN 61347 .......................................................23 BS EN 61400 .......................................................15 BS EN 61810 .......................................................15 BS EN 61925 .......................................................16 BS EN 61951 .......................................................23 BS EN 61970 .......................................................16 BS EN 62019 .......................................................21 BS EN 62059 .......................................................16 BS EN 62129 .......................................................21 BS EN 62132 .......................................................16 BS EN 62141 .......................................................16 BS EN 62197 .......................................................16 BS EN 62287 .......................................................16 BS EN 62319 .......................................................16 BS EN 62389 .......................................................16 BS EN 62391 .......................................................16 BS EN 130500 .....................................................14 BS EN 130501 .....................................................14 BS EN 131800 .....................................................14 BS EN 132401 .....................................................14 BS IEC 60747.......................................................18 DD CEN ISO/TS 14822 .........................................12 DD CEN ISO/TS 14907 .........................................12 DD CEN ISO/TS 18234 ...................................12, 14

Prices may be subject to change.

DD CLC/TS 60034................................................14 DD ENV ISO 14904 ..............................................30 DD ENV 50141 ....................................................30 DD IEC/PAS 61169 ...............................................18 PD ES 59011........................................................26 PD IEC/TR 61912 .................................................21 BS CECC 32200.............................................14, 30 BS CECC 32201.............................................14, 30 BIP 3024 ..............................................................19 KIT 8....................................................................14

Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

11...................................................................27 2858...............................................................27 3273...............................................................27 4263...............................................................27 4871...............................................................25 4872...............................................................25 4895...............................................................25 7009...............................................................27 7020.........................................................17, 29 7706...............................................................23 EN 203 .............................................................6 EN 287 ...........................................................19 EN 416 .......................................................6, 30 EN 419 .......................................................6, 30 EN 760 ...........................................................25 EN 1043 .........................................................25 EN 1299 .........................................................31 EN 1320 .........................................................25 EN 1321 .........................................................25 EN 1442 ...........................................................6 EN 1983 .........................................................39 EN ISO 2151 ...................................................19 EN 2235 ...........................................................6 EN 2435 .......................................................6, 8 EN 2436 ...........................................................8 EN 2647 ...........................................................8 EN ISO 2739 ...................................................23 EN 2856 ...........................................................8 EN ISO 3325 ...................................................24 EN 3425 ...........................................................8 EN 3426 ...........................................................8 EN 3427 ...........................................................8 EN 3727 ...........................................................8 EN 3745 ...........................................................8 EN 4041 ...........................................................8 EN 4198 ...........................................................8 EN 4311 .........................................................10 EN 4312 .........................................................10 EN 4424 .........................................................10 EN 4425 .........................................................10 EN 4494 .........................................................10 EN 4495 .........................................................10 EN 4501 .........................................................10 EN 4509 .........................................................10 EN 4617 .........................................................10 EN ISO 5349 ...................................................31 EN ISO 5828 ...................................................31 EN ISO 6847 ...................................................25 EN ISO 7284 ...................................................31 EN ISO 8662 ...................................................31 EN ISO 8665 ...................................................10 EN 9104 .........................................................10 EN 9132 .........................................................10 EN ISO 9606 .............................................25, 26 EN ISO 9692 ...................................................26 EN 10126 .................................................10, 30 EN 10143 .......................................................10 EN ISO 10156 .................................................40 EN 10165 .................................................10, 30 EN 10341 .................................................10, 30 EN 12480 .......................................................22 EN 12535 .................................................14, 30 EN 12786 .......................................................31 EN ISO 13090 .................................................31

Update Standards Aug 2006

British Standards - Quick Reference Guide continued... BS EN 13096 .......................................................40 BS EN 13133 .......................................................26 BS EN 13134 .......................................................26 BS EN 13490 .......................................................31 BS EN 13617 .......................................................20 BS EN ISO 13628 .................................................26 BS EN ISO 13702 .................................................26 BS EN ISO 13703 .................................................26 BS EN 13715 .......................................................20 BS EN ISO 13753 .................................................31 BS EN 13848 .......................................................11 BS EN ISO 13919 .................................................26 BS EN ISO 13920 .................................................26 BS EN 13952 .......................................................22 BS EN ISO 14270 .................................................26 BS EN ISO 14271 .................................................26 BS EN ISO 14272 .................................................26 BS EN ISO 14273 .................................................26 BS EN ISO 14372 .................................................26 BS EN ISO 14554 .................................................26 BS EN 14750 .......................................................11 BS EN 14764 .......................................................20 BS EN 14901 .......................................................12 BS EN ISO 15136 .................................................12 BS EN ISO 18276 ...........................................14, 30 BS EN 21089 .......................................................31 BS EN 24003 .......................................................24 BS EN 27286 .......................................................26 BS EN 30326 .......................................................31 BS EN 61582 .......................................................15 BS ISO 2575 ........................................................23 BS ISO 2596 ........................................................16 BS ISO 3408 ........................................................17 BS ISO 6149 ........................................................17 BS ISO 8379 ........................................................23 BS ISO 8573 ........................................................31 BS ISO 9974 ........................................................17 BS ISO 10204 ................................................17, 29 BS ISO 13291 ......................................................17 BS ISO 13312 ......................................................17 BS ISO 16992 ......................................................18 BS ISO 17475 ......................................................21 BS ISO 20283 ......................................................18 BS ISO 21014 ......................................................40 DD ENV 1259 ..................................................6, 30 PD 6430/1 ...........................................................28 PD 6604 ..............................................................26 PD CEN/TR 81......................................................18 PD CEN/TR 15350................................................40 BS A 101 .............................................................24 BS A 102 .............................................................21 BS A 104 .............................................................22 BS A 113 .............................................................31 BS A 114 .............................................................31 BS A 169 .............................................................22 BS A 170 .............................................................24 BS A 211 .............................................................31 BS A 228 .............................................................31 BS AU 224b.........................................................27 BS C 4 .................................................................24 BS C 5 .................................................................24 BS C 6 .................................................................24 BS C 9 .................................................................24 BS C 10 ...............................................................24 BS C 18 ...............................................................24 BS C 20 ...............................................................24 BS M 44 ..............................................................24 BS M 48 ..............................................................24 BS V 3 .................................................................26 BS V 4 .................................................................26 BS V 35 ...............................................................26 BS V 37 ...............................................................27 BS V 38 ...............................................................27 BS W 8 ................................................................24 BS W 11 ..............................................................24 BS W 13 ..............................................................24

Update Standards Aug 2006

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

MA 6 ..............................................................28 MA 7 ..............................................................28 MA 9 ..............................................................28 MA 10 ............................................................28 MA 11 ............................................................28 MA 12 ............................................................28 MA 13 ............................................................28 MA 14 ............................................................28 MA 17 ............................................................28 MA 19 ............................................................28 MA 20 ............................................................28 MA 21 ............................................................28 MA 22 ............................................................28 MA 23 ............................................................28 MA 26 ............................................................28 MA 27 ............................................................28 MA 30 ............................................................28 MA 31 ............................................................28 MA 33 ............................................................28 MA 34 ............................................................28 MA 35 ............................................................28 MA 36 ............................................................28 MA 37 ............................................................28 MA 39 ............................................................28 MA 40 ............................................................28 MA 42 ............................................................28 MA 44 ............................................................28 MA 45 ............................................................28 MA 46 ............................................................28 MA 49 ............................................................28 MA 52 ............................................................28 MA 53 ............................................................28 MA 55 ............................................................29 MA 56 ............................................................29 MA 59 ............................................................29 MA 60 ............................................................29 MA 61 ............................................................29 MA 62 ............................................................29 MA 70 ............................................................29 MA 71 ............................................................29 MA 72 ............................................................29 MA 73 ............................................................29 MA 74 ............................................................29 MA 75 ............................................................29 MA 77 ............................................................29 MA 79 ............................................................29 MA 94 ............................................................29 PL 1 ................................................................27 SP 1 ................................................................24 SP 3 ................................................................27 SP 4 ................................................................24 SP 8 ................................................................24 SP 33 ..............................................................24 SP 34 ..............................................................24 SP 35 ..............................................................24 SP 36 ..............................................................24 SP 37 ..............................................................24 SP 38 ..............................................................24 SP 39 ..............................................................24 SP 49 ..............................................................24 SP 50 ..............................................................24 SP 51 ..............................................................24 SP 52 ..............................................................24 SP 53 ..............................................................24 SP 54 ..............................................................24 SP 59 ..............................................................24 SP 60 ..............................................................24 SP 66 ..............................................................24 SP 67 ..............................................................24 SP 94 ..............................................................24 SP 101 ............................................................24 SP 102 ............................................................24 SP 103 ............................................................24 SP 104 ............................................................24 SP 105 ............................................................24 SP 106 ............................................................24

Prices may be subject to change.

BS BS BS BS BS BS BS BS BS BS

SP SP SP SP SP SP SP SP SP SP

114 ............................................................24 118 ............................................................24 119 ............................................................24 120 ............................................................24 141 ............................................................24 144 ............................................................31 145 ............................................................31 146 ............................................................31 147 ............................................................31 164 ............................................................24

Health and environment BS 6069...............................................................23 BS 7915...............................................................25 BS 7963...............................................................25 BS EN 54 ...................................................6, 19, 22 BS EN 250 ...........................................................19 BS EN 615 ...........................................................19 BS EN 960 .............................................................6 BS EN 1149 ...........................................................6 BS EN 1366 ...........................................................6 BS EN ISO 3745 ...................................................20 BS EN ISO 10075 .................................................26 BS EN ISO 10819 .................................................31 BS EN ISO 10942 .................................................10 BS EN ISO 10943 .................................................10 BS EN ISO 11205 .................................................20 BS EN ISO 11979 ...........................................10, 30 BS EN 12094 .......................................................11 BS EN 12259 .................................................20, 22 BS EN 13503 .................................................10, 30 BS EN 14034 .......................................................11 BS EN 14491 .......................................................11 BS EN ISO 14505 .................................................11 BS EN 14996 .......................................................12 BS EN ISO 15004 .................................................12 BS EN ISO 21171 .................................................14 BS EN ISO 21649 .................................................14 BS EN 60601 .......................................................21 BS ISO 15713 ......................................................18 BS ISO 19703 ......................................................18 PD CEN/TR 15278................................................18 PD CEN/TR 15281................................................18

Information systems BS 4730...............................................................27 BS 4783...............................................................27 BS 7896...............................................................23 BS EN ISO 15438 .................................................17 BS ISO/IEC 14143 ................................................17 BS ISO/IEC 14443 ................................................21 BS ISO/IEC 15438 ................................................17 BS ISO/IEC 18031 ................................................18 BS ISO/IEC 19757 ................................................18 BS ISO/IEC 20000 ................................................19 BS ISO 21188 ......................................................18 BS ISO/IEC 23026 ................................................18 BS ISO/IEC 24728 ................................................18 BIP 0005 ..............................................................19 BIP 0015 ..............................................................19 BIP 0085 ..............................................................19 KIT 32..................................................................19 PAS 78.................................................................23

Management systems BS 6001...............................................................19 BS ISO 10014 ................................................17, 30 BS ISO 14025 ......................................................17 DD CEN/TS 14014 ...............................................11 DD ENV 14014 ....................................................11 PD 6532 ..............................................................28 PD ISO/TR 10014 ...........................................17, 30

continued on page 52

5

Other ETSI British Standards Publications continued...

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2). The publications listed below are new and revised British Standards that were made available during last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute members. BS 5268:— Structural use of timber

BS 5268-3:2006 Code of practice for trussed rafter roofs supersedes BS 5268-3:1998 ISBN 0 580 47340 6 £74.00 members, £148.00 non-members B/525/5

BS EN PUBLICATIONS

BS EN 54-21:2006

BS EN 646:2006

Alarm transmission and fault warning routing equipment

Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board

no current standard is superseded ISBN 0 580 48689 3 £56.00 members, £112.00 non-members FSH/12

supersedes BS EN 646:2001 ISBN 0 580 48809 8 £28.00 members, £56.00 non-members PAI/11

BS EN 203:— Gas heated catering equipment

BS EN 203-2:— Specific requirements

BS EN 203-2-2:2006 Ovens Supersedes BS EN 203-2:1995 which remains current ISBN 0 580 48905 1 £34.00 members, £68.00 non-members

BS EN 960:2006 Headforms for use in the testing of protective helmets supersedes BS EN 960:1995 ISBN 0 580 48908 6 £56.00 members, £112.00 non-members PH/6

BS EN 1149:— Protective clothing. Electrostatic properties

GSE/19

BS EN 203-2-11:2006

BS EN 1149-1:2006

Pasta cookers

Test method for measurement of surface resistivity

Supersedes BS EN 203-2:1995 which remains current ISBN 0 580 48906 X £28.00 members, £56.00 non-members

supersedes BS EN 1149-1:1996 ISBN 0 580 48503 X £28.00 members, £56.00 non-members PH/3

GSE/19

BS EN 301:2006

BS EN 1366:—

Adhesives, phenolic and aminoplastic, for loadbearing timber structures. Classification and performance requirements

Fire resistance tests for service installations

supersedes BS EN 301:1992 ISBN 0 580 48872 1 £28.00 members, £56.00 non-members

Linear joint seals

PRI/52

BS EN 416:— Single burner gas-fired overhead radiant tube heaters for non-domestic use

BS EN 416-2:2006 Rational use of energy supersedes DD ENV 1259-1:1994, DD ENV 12592:1997 & DD ENV 1259-3:1997 ISBN 0 580 48759 8 £64.00 members, £128.00 non-members

BS EN 1366-4:2006 no current standard is superseded ISBN 0 580 48898 5 £56.00 members, £112.00 non-members FSH/22

BS EN 1442:2006 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction supersedes BS EN 1442:1998 ISBN 0 580 48873 X £56.00 members, £112.00 non-members PVE/19

GSE/20

The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 54:—

BS EN 2235:2006 BS EN 419:— Non-domestic gas-fired overhead luminous radiant heaters

Aerospace series. Single and multicore electrical cables, screened and jacketed

BS EN 419-2:2006

no current standard is superseded ISBN 0 580 48814 4 £34.00 members, £68.00 non-members

Rational use of energy

ACE/6/-/2

supersedes DD ENV 1259-1:1994, DD ENV 12592:1997 & DD ENV 1259-3:1997 ISBN 0 580 48758 X £64.00 members, £128.00 non-members

BS EN 2435:—

GSE/20

Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer

Fire detection and fire alarm systems

BS EN 534:2006 Corrugated bitumen sheets. Product specification and test methods

BS EN 2435-001:2006

Aspirating smoke detectors no current standard is superseded ISBN 0 580 48870 5 £74.00 members, £148.00 non-members

supersedes BS EN 534:1998 ISBN 0 580 48502 1 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48543 9 £28.00 members, £56.00 non-members

FSH/12

B/542/6

ACE/65/-/3

BS EN 54-20:2006

6

Prices may be subject to change.

Minimum requirements

Update Standards Aug 2006

BS EN Publications continued... BS EN 2435-002:2006

BS EN 3425:2006

BS EN 3745-404:2005

High corrosion resistance

Aerospace series. Groove dimensions for axial mounting internal type retaining rings

Thermal shock

no current standard is superseded ISBN 0 580 48544 7 £28.00 members, £56.00 non-members ACE/65/-/3

no current standard is superseded ISBN 0 580 48436 X £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48637 0 £28.00 members, £56.00 non-members ACE/6/-/10

ACE/12

BS EN 2435-003:2006

BS EN 3745-406:2005

High corrosion and fluid resistance

BS EN 3426:2006

Cold bend test

no current standard is superseded ISBN 0 580 48545 5 £28.00 members, £56.00 non-members

Aerospace series. Groove dimensions for axial mounting external type retaining rings

no current standard is superseded ISBN 0 580 48638 9 £28.00 members, £56.00 non-members

ACE/65/-/3

BS EN 2435-004:2006 High corrosion and fluid resistance with surface preparation tolerance no current standard is superseded ISBN 0 580 48546 3 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48439 4 £28.00 members, £56.00 non-members ACE/12

ACE/6/-/10

BS EN 3745-407:2005 Flammability

BS EN 3427:2006 Aerospace series. Groove dimensions for radial mounting retaining rings

no current standard is superseded ISBN 0 580 48639 7 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48430 0 £28.00 members, £56.00 non-members

ACE/6/-/10

ACE/65/-/3

BS EN 2435-005:2006

ACE/12

Scrape abrasion

High corrosion resistance for military application no current standard is superseded ISBN 0 580 48547 1 £34.00 members, £68.00 non-members ACE/65/-/3

BS EN 2436:— Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer

BS EN 3727:2006 Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification no current standard is superseded ISBN 0 580 48434 3 £56.00 members, £112.00 non-members ACE/12

BS EN 3745:— BS EN 2436-001:2006 Basic requirements no current standard is superseded ISBN 0 580 48875 6 £28.00 members, £56.00 non-members ACE/65/-/3

BS EN 2436-003:2006 High corrosion and fluid resistance no current standard is superseded ISBN 0 580 48874 8 £28.00 members, £56.00 non-members ACE/65/-/3

BS EN 2647:2006 Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235°C supersedes BS EN 2647:1995 ISBN 0 580 48534 X £28.00 members, £56.00 non-members ACE/12

BS EN 3745-503:2005 no current standard is superseded ISBN 0 580 48640 0 £28.00 members, £56.00 non-members ACE/6/-/10

BS EN 3745-512:2005 Flexure endurance no current standard is superseded ISBN 0 580 48641 9 £28.00 members, £56.00 non-members ACE/6/-/10

Aerospace series. Fibres and cables, optical, aircraft use. Test methods

BS EN 3745-513:2005

BS EN 3745-202:2005

no current standard is superseded ISBN 0 580 48648 6 £28.00 members, £56.00 non-members

Fibre dimensions

Crush resistance

no current standard is superseded ISBN 0 580 48642 7 £28.00 members, £56.00 non-members

ACE/6/-/10

ACE/6/-/10

Durability of manufacturer’s marking

BS EN 3745-306:2005 Variation of attenuation during temperature cycling no current standard is superseded ISBN 0 580 48643 5 £28.00 members, £56.00 non-members ACE/6/-/10

BS EN 3745-401:2005 Accelerated ageing no current standard is superseded ISBN 0 580 48644 3 £28.00 members, £56.00 non-members

BS EN 3745-703:2005 no current standard is superseded ISBN 0 580 48646 X £28.00 members, £56.00 non-members ACE/6/-/10

BS EN 4041:2006 Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads no current standard is superseded ISBN 0 580 48438 6 £28.00 members, £56.00 non-members ACE/12

ACE/6/-/10

BS EN 4198:2006

Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification: 1100 MPa / 235°C

BS EN 3745-402:2005 Temperature cycling

Aerospace series. Rod-ends, adjustable selfaligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads

no current standard is superseded ISBN 0 580 48554 4 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48645 1 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48440 8 £28.00 members, £56.00 non-members

ACE/12

ACE/6/-/10

ACE/12

BS EN 2856:2006

8

Prices may be subject to change.

Update Standards Aug 2006

BS EN Publications continued... BS EN 4311:2006

BS EN 4509:2006

BS EN 10341:2006

Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C

Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1 100 MPa (at ambient temperature) / 315°C

Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state

no current standard is superseded ISBN 0 580 48530 7 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48522 6 £28.00 members, £56.00 non-members

ACE/12

ACE/12

BS EN 4312:2006

BS EN 4617:2006

Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C

Aerospace series. Recommended practices for standardizing company standards

supersedes BS EN 10126:1996 and BS EN 10165:1996 ISBN 0 580 48678 8 £34.00 members, £68.00 non-members ISE/NFE/5

BS EN ISO 10942:2006

no current standard is superseded ISBN 0 580 48532 3 £28.00 members, £56.00 non-members ACE/12

BS EN 4424:2006

no current standard is superseded ISBN 0 580 48718 0 £34.00 members, £68.00 non-members

BS EN ISO 4892:— Plastics. Methods of exposure to laboratory light sources

no current standard is superseded ISBN 0 580 48437 8 £28.00 members, £56.00 non-members

supersedes BS EN ISO 4892-3:2000 ISBN 0 580 48401 7 £49.00 members, £98.00 non-members

ACE/12

PRI/21

BS EN 4425:2006

BS EN ISO 8665:2006

Aerospace series. Washers, tab in corrosion resisting steel for flight control rods. Dimensions

Small craft. Marine propulsion reciprocating internal combustion engines. Power measurements and declarations

no current standard is superseded ISBN 0 580 48435 1 £28.00 members, £56.00 non-members

supersedes BS EN ISO 8665:1996 ISBN 0 580 47081 4 £34.00 members, £68.00 non-members

ACE/12

GME/33

BS EN 9104:2006

no current standard is superseded ISBN 0 580 48533 1 £28.00 members, £56.00 non-members

Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C no current standard is superseded ISBN 0 580 48513 7 £28.00 members, £56.00 non-members ACE/12

BS EN 4501:2006

Ophthalmic instruments. Indirect ophthalmoscopes supersedes BS EN ISO 10943:1998 ISBN 0 580 48579 X £28.00 members, £56.00 non-members CH/172/6

Fluorescent UV lamps

Aerospace series. Rings, split, in stainless steel

BS EN 4495:2006

CH/172/6

BS EN ISO 10943:2006

BS EN ISO 4892-3:2006

ACE/12

supersedes BS EN ISO 10942:1998 ISBN 0 580 48578 1 £34.00 members, £68.00 non-members

ACE/1

Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads

BS EN 4494:2006

Ophthalmic instruments. Direct ophthalmoscopes

no current standard is superseded ISBN 0 580 48717 2 £49.00 members, £98.00 non-members

BS EN ISO 11145:2006 Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols supersedes BS EN ISO 11145:2001 ISBN 0 580 48397 5 £56.00 members, £112.00 non-members CPW/172

BS EN ISO 11979:— Ophthalmic implants. Intraocular lenses

BS EN ISO 11979-5:2006 Biocompatibility supersedes BS EN 13503-5:2001 ISBN 0 580 48582 X £56.00 members, £112.00 non-members CH/172/7

BS EN 12079:— Offshore containers and associated lifting sets

BS EN 12079-1:2006

ACE/1

Offshore containers. Design, manufacture and marking

BS EN 9132:2006

supersedes BS EN 12079:1999 ISBN 0 580 48823 3 £56.00 members, £112.00 non-members

Aerospace series. Quality management systems. Data matrix quality requirements for parts marking no current standard is superseded ISBN 0 580 48736 9 £56.00 members, £112.00 non-members ACE/1

TW/1

BS EN 12079-2:2006 Lifting sets. Design, manufacture and marking no current standard is superseded ISBN 0 580 48822 5 £34.00 members, £68.00 non-members

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C

BS EN 10143:2006 Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape

BS EN 12079-3:2006

no current standard is superseded ISBN 0 580 48893 4 £28.00 members, £56.00 non-members

supersedes BS EN 10143:1993 ISBN 0 580 48907 8 £34.00 members, £68.00 non-members

supersedes BS EN 12079:1999 ISBN 0 580 48824 1 £34.00 members, £68.00 non-members

ACE/12

ISE/10

TW/1

10

TW/1

Prices may be subject to change.

Periodic inspection, examination and testing

Update Standards Aug 2006

BS EN 12094:—

BS EN 14227:—

DD CEN/TS 14418:2005

Fixed firefighting systems. Components for gas extinguishing systems

Hydraulically bound mixtures. Specifications

Geosynthetic barriers. Test method for the determination of the influence of freezingthawing cycles on the permeability of clay geosynthetic barriers

BS EN 14227-10:2006 BS EN 12094-5:2006

Soil treated by cement

Requirements and test methods for high and low pressure selector valves and their actuators

no current standard is superseded ISBN 0 580 48682 6 £49.00 members, £98.00 non-members

supersedes BS EN 12094-5:2001 ISBN 0 580 48805 5 £49.00 members, £98.00 non-members FSH/18/6

Requirements and test methods for nonelectrical disable devices supersedes BS EN 12094-6:2001 ISBN 0 580 48804 7 £49.00 members, £98.00 non-members FSH/18/6

BS EN 12094-8:2006 Requirements and test methods for connectors supersedes BS EN 12094-8:1998 ISBN 0580 48803 9 £49.00 members, £98.00 non-members FSH/18/6

BS EN 12710:2006 Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l supersedes BS EN 12710:2000 ISBN 0 580 48887 X £34.00 members, £68.00 non-members PKW/0

BS EN 13848:— Railway applications. Track. Track geometry quality

BS EN 14227-11:2006 no current standard is superseded ISBN 0 580 48681 8 £49.00 members, £98.00 non-members

BS EN 14491:2006 Dust explosion venting protective systems no current standard is superseded ISBN 0 580 48806 3 £49.00 members, £98.00 non-members FSH/23

B/510/4

BS EN 14227-12:2006 Soil treated by slag no current standard is superseded ISBN 0 580 48683 4 £49.00 members, £98.00 non-members

BS EN ISO 14505:— Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles

BS EN ISO 14505-3:2006

B/510

Evaluation of thermal comfort using human subjects

BS EN 14227-13:2006

no current standard is superseded ISBN 0 580 48716 4 £49.00 members, £98.00 non-members

Soil treated by hydraulic road binder no current standard is superseded ISBN 0 580 48684 2 £49.00 members, £98.00 non-members

PH/9/1

BS EN 14750:—

B/510

Railway applications. Air conditioning for urban and suburban rolling stock

BS EN 14227-14:2006 Soil treated by fly ash no current standard is superseded ISBN 0 580 48685 0 £49.00 members, £98.00 non-members B/510/4

BS EN 14246:2006 BS EN 13848-2:2006

B/553

B/510/4

Soil treated by lime

BS EN 12094-6:2006

no current standard is superseded ISBN 0 580 47096 2 £17.00 members, £34.00 non-members

Measuring systems. Track recording vehicles

Gypsum elements for suspended ceilings. Definitions, requirements and test methods

no current standard is superseded ISBN 0 580 48686 9 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48357 6 £56.00 members, £112.00 non-members

RAE/2/-/6

B/544/1

BS EN 14750-1:2006 Comfort parameters no current standard is superseded ISBN 0 580 48787 3 £49.00 members, £98.00 non-members RAE/1/-/6

BS EN 14750-2:2006 Type tests no current standard is superseded ISBN 0 580 48785 7 £49.00 members, £98.00 non-members RAE/1/-/6

DD CEN/TS 14014:2006 Postal services. Hybrid mail. XML definition of encapsulation of letters for automated postal handling

BS EN 14257:2006 Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT ’91)

DD CEN/TS 14758:— Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD)

supersedes DD ENV 14014:2001 ISBN 0 580 48520 X £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48871 3 £28.00 members, £56.00 non-members

SVS/4

PRI/52

Guidance for installation

BS EN 14383:—

no current standard is superseded ISBN 0 580 48707 5 £13.00 members, £26.00 non-members

BS EN 14034:— Determination of explosion characteristics of dust clouds

Prevention of crime. Urban planning and building design

BS EN 14034-2:2006

DD CEN/TS 14758-3:2006

PRI/88/1

BS EN 14808:2005

Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds

BS EN 14383-1:2006 Definition of specific terms

Surfaces for sports areas. Determination of shock absorption

no current standard is superseded ISBN 0 580 48679 6 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 48897 7 £49.00 members, £98.00 non-members

partially supersedes BS 7044-2.2:1990 ISBN 0 580 48779 2 £28.00 members, £56.00 non-members

FSH/23

B/562

PRI/57

Update Standards Aug 2006

Prices may be subject to change.

11

BS EN Publications continued... BS EN 14809:2005

BS EN 14901:2006

DD CEN/TS 15364:2006

Surfaces for sports areas. Determination of vertical deformation

Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods

Characterization of waste. Leaching behaviour tests. Acid and base neutralization capacity test

no current standard is superseded ISBN 0 580 48778 4 £28.00 members, £56.00 non-members PRI/57

BS EN 14810:2006 Surfaces for sports areas. Determination of spike resistance partially supersedes BS 7044-2.3:1990 ISBN 0 580 48777 6 £28.00 members, £56.00 non-members PRI/57

DD CEN ISO/TS 14822:— Traffic and travel information. General specifications for medium-range preinformation via dedicated short-range communication

no current standard is superseded ISBN 0 580 48687 7 £34.00 members, £68.00 non-members

DD CEN/TS 15397:2006 Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification

Wood preservatives. Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test

partially supersedes BS 7044-4:1991 ISBN 0 580 48776 8 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 48747 4 £17.00 members, £34.00 non-members

BS EN 14904:2006

PRI/57

B/515

DD CEN ISO/TS 14907:— Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment

Downlink

DD CEN ISO/TS 14907-2:2006

no current standard is superseded ISBN 0 580 47241 8 £56.00 members, £112.00 non-members

Conformance tests for the onboard unit application interface

BS EN 14836:2005 Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering partially supersedes BS 7044-2.4:1989 ISBN 0 580 48780 6 £28.00 members, £56.00 non-members PRI/57

BS EN 14837:2006

no current standard is superseded ISBN 0 580 47063 6 £68.00 members, £136.00 non-members

Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment no current standard is superseded ISBN 0 580 48757 1 £34.00 members, £68.00 non-members

Ophthalmic instruments. Fundamental requirements and test methods

PRI/57

BS EN ISO 15004-1:2006 General requirements applicable to all ophthalmic instruments supersedes BS EN ISO 15004:1998 ISBN 0 580 48577 3 £34.00 members, £68.00 non-members CH/172/6

PRI/57

Optics and photonics. Microlens arrays

BS EN ISO 14880-3:2006

PRI/60

BS EN ISO 17375:2006

no current standard is superseded ISBN 0 580 48655 9 £34.00 members, £68.00 non-members

BS EN ISO 15004:—

BS EN ISO 14880:—

no current standard is superseded ISBN 0 580 48455 6 £28.00 members, £56.00 non-members

BS EN 14996:2006

partially supersedes BS 7044-2.2:1990 ISBN 0 580 48781 4 £34.00 members, £68.00 non-members

partially supersedes BS 7044-4:1991 ISBN 0580 48775 X £34.00 members, £68.00 non-members

Resilient, textile and laminate floor coverings. Floor covering standard symbols

Animal feeding stuffs. Determination of aflatoxin B1

Surfaces for sports areas. Determination of slip resistance

Synthetic surfaces for outdoor sports areas. Specification

DD CEN/TS 15398:2006

EPL/278

EH/3/5

BS EN 14877:2006

B/508/3

PSE/10

DD CEN ISO/TS 14822-1:2006

EPL/278

no current standard is superseded ISBN 0 580 48237 5 £28.00 members, £56.00 non-members

BS EN ISO 15136:— Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift

BS EN ISO 15136-2:2006

AW/10

DD CEN ISO/TS 18234:— Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) datastreams

DD CEN ISO/TS 18234-1:2006 Introduction, numbering and versions no current standard is superseded ISBN 0 580 47037 7 £17.00 members, £34.00 non-members EPL/278

DD CEN ISO/TS 18234-2:2006 Syntax, semantics and framing structure (SSF) no current standard is superseded ISBN 0 580 47038 5 £34.00 members, £68.00 non-members EPL/278

DD CEN ISO/TS 18234-3:2006

Surface drive systems

Service and network information (SNI) application

no current standard is superseded ISBN 0 580 48722 9 £68.00 members, £136.00 non-members

no current standard is superseded ISBN 0 580 47039 3 £34.00 members, £68.00 non-members

PSE/17/-/4

EPL/278

BS EN ISO 14880-4:2006

DD CEN/TS 15359:2006

DD CEN ISO/TS 18234-4:2006

Test methods for geometrical properties

Solid recovered fuels. Specifications and classes

Road traffic message (RTM) application

no current standard is superseded ISBN 0 580 48720 2 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48535 0 £17.00 members, £34.00 non-members

no current standard is superseded ISBN 0 580 47040 7 £68.00 members, £136.00 non-members

CPW/172

PTI/17

EPL/278

Test methods for optical properties other than wavefront aberrations no current standard is superseded ISBN 0 580 48721 0 £49.00 members, £98.00 non-members CPW/172

12

Prices may be subject to change.

Update Standards Aug 2006

BS EN Publications continued... DD CEN ISO/TS 18234-5:2006

DD CLC/TS 60034:—

BS EN 60384:—

Public transport information (PTI) application

Rotating electrical machines

Fixed capacitors for use in electronic equipment

no current standard is superseded ISBN 0 580 47041 5 £56.00 members, £112.00 non-members

DD CLC/TS 60034-25:2005

BS EN 60384-2-1:2005

Guide for the design and performance of cage induction motors specifically designed for converter supply

Blank detail specification. Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors. Assessment levels E and EZ

no current standard is superseded ISBN 0 580 48836 5 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48743 1 £34.00 members, £68.00 non-members

PEL/2

EPL/40X

BS EN 60076:—

BS EN 60384-6:2005

Power transformers

Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors

EPL/278

DD CEN ISO/TS 18234-6:2006 Location referencing applications no current standard is superseded ISBN 0 580 47042 3 £64.00 members, £128.00 non-members EPL/278

BS EN ISO 18276:2006 Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels. Classification supersedes BS EN 12535:2000 ISBN 0 580 48441 6 £56.00 members, £112.00 non-members WEE/39

BS EN ISO 18472:2006 Sterilization of health care products. Biological and chemical indicators. Test equipment and methods no current standard is superseded ISBN 0 580 48454 8 £56.00 members, £112.00 non-members LBI/35

BS EN 60076-5:2006 Ability to withstand short-circuit supersedes BS EN 60076-5:2001 which remains current ISBN 0 580 48784 9 £56.00 members, £112.00 non-members

Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements and testing supersedes BS EN 1454:1997 ISBN 0 580 48631 1 £64.00 members, £128.00 non-members B/513

BS EN ISO 21171:2006 Medical gloves. Determination of removable surface powder no current standard is superseded ISBN 0 580 48375 4 £34.00 members, £68.00 non-members CH/205/3

EPL/40X

PEL/14

BS EN 60384-6-1:2005

BS EN 60204:—

Blank detail specification. Fixed metallized polycarbonate film dielectric d.c. capacitors. Assessment level E

Safety of machinery. Electrical equipment of machines

BS EN 60204-1:2006 General requirements supersedes BS EN 60204-1:1998 ISBN 0 580 48713 X £90.00 members, £180.00 non-members GEL/44

BS EN ISO 19432:2006

supersedes BS EN 130500:1998 which remains current ISBN 0 580 48812 8 £49.00 members, £98.00 non-members

Also available as part of KIT 8.

BS EN 60216:— Electrical insulating materials. Thermal endurance properties

supersedes BS EN 130501:1998 which remains current ISBN 0 580 48811 X £34.00 members, £68.00 non-members EPL/40X

BS EN 60384-13:2006 Sectional specification. Fixed polypropylene film dielectric metal foil d.c. capacitors supersedes BS EN 131800:1998 which remains current ISBN 0 580 48714 8 £49.00 members, £98.00 non-members EPL/40X

BS EN 60216-4-1:2006 Ageing ovens. Single-chamber ovens supersedes BS 5691-4.1:1995 ISBN 0 580 48807 1 £34.00 members, £68.00 non-members GEL/112

BS EN 60282:— High-voltage fuses

BS EN 60384-14-1:2005 Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level D supersedes BS EN 132401:1995 which remains current ISBN 0 580 48592 7 £34.00 members, £68.00 non-members EPL/40X

BS EN 60282-1:2006 Current-limiting fuses

BS EN ISO 21649:2006 Needle-free injectors for medical use. Requirements and test methods

supersedes BS EN 60282-1:2002 ISBN 0 580 48701 6 £74.00 members, £148.00 non-members

no current standard is superseded ISBN 0 580 48550 1 £64.00 members, £128.00 non-members

PEL/32

CH/84

Household and similar electrical appliances. Safety

BS EN 60335:—

Sectional specification. Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors supersedes BS CECC 32200:1989 ISBN 0 580 48745 8 £49.00 members, £98.00 non-members EPL/40X

BS EN 60384-19-1:2006

BS EN 50200:2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits

BS EN 60335-2-90:2006

supersedes BS EN 50200:2000 which is withdrawn and BS 8434-1:2003 which remains current ISBN 0 580 48751 2 £49.00 members, £98.00 non-members

supersedes BS EN 60335-2-90:2002 which remains current ISBN 0 580 48748 2 £68.00 members, £136.00 non-members

GEL/20/18

CPL/61/07

14

BS EN 60384-19:2006

Particular requirements for commercial microwave ovens

Prices may be subject to change.

Blank detail specification. Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors. Assessment level EZ supersedes BS CECC 32201:1988 ISBN 0 580 48744 X £28.00 members, £56.00 non-members EPL/40X

Update Standards Aug 2006

BS EN 60598:—

BS EN 60950:—

BS EN 61326-2:—

Luminaires

Information technology equipment. Safety

Particular requirements

BS EN 60598-2-12:2006

BS EN 60950-22:2006

Particular requirements. Mains socket-outlet mounted nightlights no current standard is superseded ISBN 0 580 48826 8 £28.00 members, £56.00 non-members CPL/34/4

Equipment installed outdoors

BS EN 61326-2-1:2006

no current standard is superseded ISBN 0 580 48756 3 £56.00 members, £112.00 non-members

Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

EPL/108

partially supersedes BS EN 61326:1998 ISBN 0 580 48596 X £28.00 members, £56.00 non-members

BS EN 60704:—

BS EN 61212:—

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes

BS EN 61326-2-2:2006

BS EN 60704-3:2006 Procedure for determining and verifying declared noise emission values supersedes BS EN 60704-3:1995 which remains current ISBN 0 580 48708 3 £34.00 members, £68.00 non-members CPL/59

GEL/65/1

Definitions, designations and general requirements

Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

supersedes BS EN 61212-1:1996 ISBN 0 580 48789 X £28.00 members, £56.00 non-members

partially supersedes BS EN 61326:1998 ISBN 0 580 48597 8 £28.00 members, £56.00 non-members

GEL/15

GEL/65/1

BS EN 61212-1:2006

BS EN 60770:— Transmitters for use in industrial-process control systems

BS EN 61212-3-1:2006 Specifications for individual materials. Round laminated rolled tubes

BS EN 61326-2-6:2006

BS EN 60770-3:2006

supersedes BS EN 61212-3-1:1996 ISBN 0 580 48788 1 £34.00 members, £68.00 non-members

partially supersedes BS EN 61326:1998 ISBN 0 580 48601 X £28.00 members, £56.00 non-members

GEL/15/3/6

GEL/65/1

Methods for performance evaluation of intelligent transmitters no current standard is superseded ISBN 0 580 48866 7 £68.00 members, £136.00 non-members

BS EN 61249:—

GEL/65/2

Materials for printed boards and other interconnecting structures

BS EN 60794:—

In vitro diagnostic (IVD) medical equipment

BS EN 61400:— Wind turbines

Optical fibre cables

BS EN 60794-3:— Outdoor cables

BS EN 60794-3-12:2006 Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling no current standard is superseded ISBN 0 580 47071 7 £28.00 members, £56.00 non-members

BS EN 61249-2-2:2005 Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad supersedes BS EN 60249-2-1:1994 & BS EN 602492-7:1994 ISBN 0 580 45935 7 £34.00 members, £68.00 non-members

BS EN 60794-3-21:2006 Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling no current standard is superseded ISBN 0 580 47073 3 £28.00 members, £56.00 non-members GEL/86/1

Power performance measurements of electricity producing wind turbines supersedes BS EN 61400-12:1998 ISBN 0 580 47209 4 £74.00 members, £148.00 non-members PEL/88

EPL/501

BS EN 61582:2006 BS EN 61307:2006

GEL/86/1

BS EN 61400-12-1:2006

Industrial microwave heating installations. Test methods for the determination of power output

Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment

supersedes BS EN 61307:1997 ISBN 0 580 48022 4 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48479 3 £68.00 members, £136.00 non-members

PEL/27

NCE/2

BS EN 61326:— Electrical equipment for measurement, control and laboratory use. EMC requirements

BS EN 61810:— Electromechanical elementary relays

e-mail your order [email protected]

Update Standards Aug 2006

BS EN 61326-1:2006

BS EN 61810-7:2006

General requirements

Test and measurement procedures

partially supersedes BS EN 61326:1998 ISBN 0 580 48598 6 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 48868 3 £74.00 members, £148.00 non-members

GEL/65/1

EPL/94

Prices may be subject to change.

15

BS EN Publications continued... BS EN 61925:2006

BS EN 62287:—

Multimedia systems and equipment. Multimedia home server systems. Vocabulary of home server

Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS)

no current standard is superseded ISBN 0 580 48750 4 £28.00 members, £56.00 non-members EPL/100

BS EN 62287-1:2006 Carrier-sense time division multiple access (CSTDMA) techniques

BS EN 61970:— Energy management system application program interface (EMS-API)

no current standard is superseded ISBN 0 580 48746 6 £74.00 members, £148.00 non-members

BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the ’Amendment to British Standards’ and ’Updated British Standards’ sections of this issue of Update Standards. BS EN ISO 5912:2005 Camping tents TCI/74

EPL/80

Implementation of European standard EN ISO 5912 by amendment to BS ISO 5912:2003.

BS EN 62319:—

BS EN 60728:—

BS EN 61970-501:2006 Common information model resource description framework (CIM RDF) schema no current standard is superseded ISBN 0 580 48876 4 £34.00 members, £68.00 non-members

Polymeric thermistors. Directly heated positive step function temperature coefficient

BS EN 62319-1:2005

PEL/57

Generic specification

BS EN 62059:—

no current standard is superseded ISBN 0 580 48724 5 £56.00 members, £112.00 non-members

Electricity metering equipment. Dependability

Cable networks for television signals, sound signals and interactive services

BS EN 60728-3:2006 Active wideband equipment for coaxial cable networks EPL/100

Implementation of European standard EN 60728-3 by amendment to BS EN 50083-3:2002.

EPL/40X

BS EN 60728-10:2006 BS EN 62059-41:2006 Reliability prediction no current standard is superseded ISBN 0 580 48862 4 £49.00 members, £98.00 non-members PEL/13

BS EN 62319-1-1:2005 Blank detail specification. Current limiting application no current standard is superseded ISBN 0 580 48725 3 £34.00 members, £68.00 non-members EPL/40X

BS EN 62132:—

BS EN 62389:2006

Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz

Methods of measurement for DVD players

BS EN 62132-1:2006 General conditions and definitions no current standard is superseded ISBN 0 580 48820 9 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 48864 0 £34.00 members, £68.00 non-members EPL/100

BS EN 62391-1:2006

Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods

no current standard is superseded ISBN 0 580 48867 5 £56.00 members, £112.00 non-members EPL/40X

Sectional specification. Electric double-layer capacitors for power application no current standard is superseded ISBN 0 580 48894 2 £49.00 members, £98.00 non-members EPL/40X

Generic specification

Fixed electric double-layer capacitors for use in electronic equipment

no current standard is superseded ISBN 0 580 48802 0 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48840 3 £28.00 members, £56.00 non-members

EPL/48

EPL/40X

16

supersedes BS ISO 2596:1994 ISBN 0 580 48834 9 £56.00 members, £112.00 non-members ISE/58

BS EN 62391-2:2006

BS EN 62391-2-1:2006 BS EN 62197-1:2006

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added.

BS ISO 2596:2006

Generic specification

Connectors for electronic equipment. Quality assessment requirements

BS IMPLEMENTATIONS

Fixed electric double-layer capacitors for use in electronic equipment

Helical-scan digital video cassette recording format using 12,65mm magnetic tape and incorporating MPEG-4 compression. Type D-16 format

BS EN 62197:—

Implementation of European standard EN 60728-10 by amendment to BS EN 50083-10:2002.

BS EN 62391:—

BS EN 62141:2006

EPL/100

EPL/100

Note: The date referenced in the identifier is the date of the international standard.

EPL/47

no current standard is superseded ISBN 0 580 48863 2 £78.00 members, £156.00 non-members

System performance for return paths

Prices may be subject to change.

Please do not send confirmation of orders placed by telephone as it can lead to duplication

Update Standards Aug 2006

BS ISO 2846:—

BS ISO 10204:2006

BS ISO 14025:2006

Graphic technology. Colour and transparency of printing ink sets for four-colour printing

Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method

Environmental labels and declarations. Type III environmental declarations. Principles and procedures

BS ISO 2846-5:2005 Flexographic printing no current standard is superseded ISBN 0 580 48831 4 £34.00 members, £68.00 non-members PAI/43

supersedes BS 7020-18:1993 ISBN 0 580 48895 0 £34.00 members, £68.00 non-members ISE/58

SES/1/3

BS ISO 11084:—

BS ISO/IEC 14143:—

Graphic technology. Register systems for photographic materials, foils and paper

Information technology. Software measurement. Functional size measurement

BS ISO 3408:— Ball screws

BS ISO 3408-3:2006 Acceptance conditions and acceptance tests no current standard is superseded ISBN 0 580 48900 0 £49.00 members, £98.00 non-members

BS ISO/IEC 14143-6:2006 Register pin systems for plate making

Guide for use of ISO/IEC 14143 series and related international standards

no current standard is superseded ISBN 0 580 48600 1 £28.00 members, £56.00 non-members

no current standard is superseded ISBN 0 580 48749 0 £49.00 members, £98.00 non-members

PAI/43

IST/15

BS ISO 11084-2:2006

BS ISO 14531:—

MTE/1

BS ISO 12647:— BS ISO 6149:— Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing

Graphic technology. Process control for the production of half-tone colour separations, proof and production prints

BS ISO 12647-1:2004 Parameters and measurement methods

BS ISO 6149-4:2006 Dimensions, design, test methods and requirements for external and internal hex port plugs no current standard is superseded ISBN 0 580 48666 4 £34.00 members, £68.00 non-members MCE/18/-/4

BS ISO 9128:2006 Road vehicles. Graphical symbols to designate brake fluid types supersedes BS AU 229:1989 ISBN 0 580 48695 8 £34.00 members, £68.00 non-members

no current standard is superseded ISBN 0 580 48676 1 £56.00 members, £112.00 non-members

supersedes BS ISO 12647-1:1996 ISBN 0 580 48833 0 £49.00 members, £98.00 non-members

Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications

BS ISO 14531-2:2004 Fittings for heat-fusion jointing no current standard is superseded ISBN 0 580 48023 2 £56.00 members, £112.00 non-members PRI/88/2/P6

PAI/43

BS ISO 14531-3:2006 BS ISO 12647-6:2006 Flexographic printing no current standard is superseded ISBN 0 580 48810 1 £34.00 members, £68.00 non-members PAI/42

Fittings for mechanical jointing (including PE-X/metal transitions) no current standard is superseded ISBN 0 580 48024 0 £49.00 members, £98.00 non-members PRI/88/2/P6

BS ISO 14531-4:2006 BS ISO 12649:2004

System design and installation guidelines

PRI/69

Graphic technology. Safety requirements for binding and finishing systems and equipment

BS ISO 9974:—

no current standard is superseded ISBN 0 580 48832 2 £84.00 members, £168.00 non-members

no current standard is superseded ISBN 0 580 48025 9 £49.00 members, £98.00 non-members

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing

PAI/43

PRI/88/2/P6

BS ISO 15076:— Image technology colour management. Architecture, profile format and data structure

BS ISO 9974-4:2006

BS ISO 13291:2006

Dimensions, design, test methods and requirements for external hex and internal hex port plugs

Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method

no current standard is superseded ISBN 0 580 48659 1 £34.00 members, £68.00 non-members

no current standard is superseded ISBN 0 580 48902 7 £49.00 members, £98.00 non-members

MCE/18/-/4

NFE/36

BS ISO 10014:2006

BS ISO 13312:2006

Quality management. Guidelines for realizing financial and economic benefits

Iron ores. Determination of potassium. Flame atomic absorption spectrometric method

Information technology. Automatic identification and data capture techniques. PDF417 bar code symbology specification

supersedes PD ISO/TR 10014:1998 ISBN 0 580 48797 0 £56.00 members, £112.00 non-members

supersedes BS ISO 13312:1997 ISBN 0 580 48835 7 £34.00 members, £68.00 non-members

supersedes BS EN ISO 15438:2003 ISBN 0 580 48691 5 £78.00 members, £156.00 non-members

QS/1

ISE/58

IST/34

BS ISO 15076-1:2005 Based on ICC.1:2004-10 no current standard is superseded ISBN 0 580 48827 6 £78.00 members, £156.00 non-members PAI/43

BS ISO/IEC 15438:2006

Update Standards Aug 2006

Prices may be subject to change.

17

BS Implementations continued... BS ISO 15713:2006

BS ISO/IEC 19757-4:2006

BS IEC 60747:—

Stationary source emissions. Sampling and determination of gaseous fluoride content

Namespace-based validation dispatching language (NVDL)

Semiconductor devices

no current standard is superseded ISBN 0 580 48774 1 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 48773 3 £68.00 members, £136.00 non-members

EH/2/1

IST/41

BS ISO 15994:2005 Graphic technology. Testing of prints. Visual lustre no current standard is superseded ISBN 0 580 48808 X £34.00 members, £68.00 non-members PAI/43

BS ISO 16992:2006 Passenger car tyres. Spare unit substitutive equipment (SUSE) no current standard is superseded ISBN 0 580 48817 9 £34.00 members, £68.00 non-members AUE/4

BS ISO 17500:2006 Aluminium oxide used for the production of primary aluminium. Determination of attrition index no current standard is superseded ISBN 0 580 48865 9 £34.00 members, £68.00 non-members CII/24

BS ISO/IEC 18031:2005 Information technology. Security techniques. Random bit generation no current standard is superseded ISBN 0 580 48727 X £90.00 members, £180.00 non-members

BS ISO 20283:— Mechanical vibration. Measurement of vibration on ships

BS ISO 20283-3:2006 Pre-installation vibratory noise measurement of shipboard equipment no current standard is superseded ISBN 0 580 48665 6 £49.00 members, £98.00 non-members

BS IEC 60747-1:2006 General supersedes BS 6493-1.1:1984 ISBN 0 580 48821 7 £56.00 members, £112.00 non-members EPL/47

BS IEC 60747-5-4:2006 Discrete devices. Optoelectronic devices. Semiconductor lasers no current standard is superseded ISBN 0 580 48819 5 £49.00 members, £98.00 non-members EPL/47

GME/21/3

BS ISO 21188:2006

DD IEC/PAS 61169:— Radio-frequency connectors

Public key infrastructure for financial services. Practices and policy framework no current standard is superseded ISBN 0 580 48787 3 £78.00 members, £156.00 non-members IST/12

BS ISO 21507:2005 Earth-moving machinery. Performance requirements for non-metallic fuel tanks no current standard is superseded ISBN 0 580 48829 2 £28.00 members, £56.00 non-members B/513/1

DD IEC/PAS 61169-4:2006 Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock. Characteristic impedance 50 Ω (type 7-16) no current standard is superseded ISBN 0 580 48661 3 £17.00 members, £34.00 non-members EPL/46/2

PUBLISHED DOCUMENTS

IST/33

BS ISO 18185:— Freight containers. Electronic seals

BS ISO 18185-3:2006 Environmental characteristics no current standard is superseded ISBN 0 580 48818 7 £28.00 members, £56.00 non-members TW/1

BS ISO 22234:2005

PD CEN/TR 81:—

Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio

PD CEN/TR 81-10:2004

no current standard is superseded ISBN 0 580 48828 4 £34.00 members, £68.00 non-members CPW/36

no current standard is superseded ISBN 0 580 48903 5 £56.00 members, £112.00 non-members FSH/16

no current standard is superseded ISBN 0 580 47983 8 £49.00 members, £98.00 non-members

BS ISO/IEC 23026:2006 Software engineering. Recommended practice for the internet. Web site engineering, web site management, and web site life cycle no current standard is superseded ISBN 0 580 46759 3 £74.00 members, £148.00 non-members IST/15

PD CEN/TR 15278:2006 Workplace exposure. Strategy for the evaluation of dermal exposure no current standard is superseded ISBN 0 580 48272 3 £49.00 members, £98.00 non-members EH/2/2

BS ISO/IEC 19757:— Information technology. Document schema definition languages (DSDL)

System of the EN 81 series of standards

MHE/4

BS ISO 19703:2005 Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires

Safety rules for the construction and installation of lifts. Basics

BS ISO/IEC 24728:2006 PD CEN/TR 15281:2006

Rule-based validation. Schematron

Information technology. Automatic identification and data capture techniques. MicroPDF417 bar code symbology specification

no current standard is superseded ISBN 0 580 48690 7 £56.00 members, £112.00 non-members

no current standard is superseded ISBN 0 580 48693 1 £84.00 members, £168.00 non-members

no current standard is superseded ISBN 0 580 47233 7 £68.00 members, £136.00 non-members

IST/41

IST/34

FSH/23

BS ISO/IEC 19757-3:2006

18

Prices may be subject to change.

Guidance on inerting for the prevention of explosions

Update Standards Aug 2006

IT AND INFORMATION MANAGEMENT PUBLICATIONS AND PRODUCTS BIP 0015:2006 IT service management. Self assessment workbook. 2nd edition no current standard is superseded ISBN 0 580 47923 4 £40.00 members, £40.00 non-members Also available as part of KIT 32.

BIP 0085 “Biometrics standards today” newsletter no current standard is superseded ISBN 0 580 48590 0 £199.00 members, £199.00 non-members

SPECIALIST BOOKS FROM BSI

AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available free of charge on request to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available during last month.

BS EN 71:— Safety of toys

BS EN 71-3:1995 (BS 5665-3:1995) Specification for migration of certain elements CORRIGENDUM 1 AMD 16465 £49.00 members, £98.00 non-members CW/15

Also incorporates Amendment 1.

BS EN 250:2000 Respiratory equipment. Open-circuit selfcontained compressed air diving apparatus. Requirements, testing, marking AMENDMENT 1 AMD 16455 £34.00 members, £68.00 non-members PH/4/7

BS 4533:— Luminaires

BS EN 287:— Qualification test of welders. Fusion welding

BS 4533-102.19:1990 BIP 3024:2006 The UK guide to standardization for overhead electrical lines CD-ROM no current standard is superseded ISBN 0 580 46005 3 £197.50 members, £395.00 non-members VAT is applicable to this item.

Particular requirements. Specification for airhandling luminaires (safety requirements)

BS EN 287-1:2004

CORRIGENDUM 1 AMD 16332 CPL/34/4

AMENDMENT 1 AMD 16295 £56.00 members, £112.00 non-members

Also incorporates Amendment 1.

WEE/36

Steels

Also incorporates Corrigendum 1.

BS 5400:—

KITS, SETS, PACKS AND SERIES

Steel, concrete and composite bridges

BS EN 615:1995

BS 5400-3:2000

Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)

Code of practice for design of steel bridges

KIT 32

CORRIGENDUM 2 AMD 16480

CORRIGENDUM 1 AMD 16471 £34.00 members, £68.00 non-members

IT service management standards and guidance kit

B/525/10

FSH/18/4

Also incorporates Amendment 1 and Corrigendum 1.

Also incorporates Amendment 1.

no current standard is superseded ISBN 0 580 48696 6 £151.01 members, £235.00 non-members Special offer. Includes BS ISO/IEC 20000-1, BS ISO/IEC 20000-2, BIP 0005 and BIP 0015.

KIT 191 Legal admissibility guidance kit no current standard is superseded ISBN 0 580 48841 1 £216.00 members, £216.00 non-members Special offer. Includes BIP 0008-1, BIP 0008-2, BIP 0008-3, BIP 0009-1, BIP 0009-2 and BIP 0009-3.

BS 5665:— Safety of toys

Admixtures for concrete, mortar and grout

BS 5665-3:— Specification for migration of certain elements See BS EN 71-3.

BS EN 934-2:2001

BS 6001:—

CORRIGENDUM 1 AMD 16490

Sampling procedures for inspection by attributes

B/517/3

BS 6001-4:2005

Please do not send confirmation of orders placed by

duplication

Update Standards Aug 2006

Concrete admixtures. Definitions, requirements, conformity, marking and labelling

Also incorporates Amendments 1 & 2.

System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

BS EN 1457:1999

CORRIGENDUM 1 AMD 16506 £68.00 members, £136.00 non-members

CORRIGENDUM 1 AMD 16474 £56.00 members, £112.00 non-members

SS/5

B/506

Chimneys. Clay/ceramic flue liners. Requirements and test methods

Also incorporates Amendment 1.

BS EN 54:— Fire detection and fire alarm systems

telephone as it can lead to

BS EN 934:—

BS EN 54-11:2001 Manual call points

BS EN ISO 2151:2004 Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (grade 2)

CORRIGENDUM 1 AMD 16487

CORRIGENDUM 2 AMD 16288 £56.00 members, £112.00 non-members

FSH/12

MCE/8

Also incorporates Amendment 1.

Also incorporates Corrigendum 1.

Prices may be subject to change.

19

Amendments to British Standards continued... BS EN ISO 3543:2001

BS EN 13161:2001

BS EN ISO 14880:—

Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method

Natural stone test methods. Determination of flexural strength under constant moment

Microlens array

CORRIGENDUM 1 AMD 16494 £49.00 members, £98.00 non-members STI/33

BS EN ISO 3745:2003 Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and hemi-anechoic rooms CORRIGENDUM 2 AMD 16273

CORRIGENDUM 1 AMD 16214 B/545

Vocabulary CORRIGENDUM 1 AMD 15957

BS EN 13165:2001

CPW/172

Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification

BS EN 14976:2005

CORRIGENDUM 2 AMD 16513 PRI/72

Also incorporates Amendment 1 and Corrigendum 1.

BS EN ISO 8261:2002 Milk and milk products. General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination CORRIGENDUM 1 AMD 16265 £49.00 members, £98.00 non-members AW/5

BS EN ISO 11205:2003 Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity CORRIGENDUM 2 AMD 16272 £49.00 members, £98.00 non-members EH/1/4

Also incorporates Corrigendum 1.

BS EN ISO 11402:2005 Phenolic, amino and condensation resins. Determination of free-formaldehyde content CORRIGENDUM 1 AMD 16475 £34.00 members, £68.00 non-members PRI/42

BS EN 13592:2003 Plastics sacks for household waste collection. Types, requirements and test methods CORRIGENDUM 1 AMD 16343

Fixed firefighting systems. Components for sprinkler and water spray systems

BS EN 12259-1:1999 Sprinklers

CORRIGENDUM 1 AMD 16432

BS EN 50083:— Cabled distribution systems for television and sound signals

PKW/0

BS EN 50083-3:2002 BS EN 13617:— Petrol filling stations

BS EN 13617-1:2004

Active wideband equipment for coaxial cable networks AMENDMENT 1 AMD 16473 EPL/100

Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

Renumbered as BS EN 60728-3:2006.

CORRIGENDUM 2 AMD 16286

System performance for return paths

PVE/21

AMENDMENT 1 AMD 16472 £56.00 members, £112.00 non-members

Also incorporates Corrigendum 1.

BS EN 50083-10:2002

EPL/100

BS EN 13715:2006 Railway applications. Wheelsets and bogies. Wheels. Wheels tread

Renumbered as BS EN 60728-10:2006.

BS EN 50117:—

CORRIGENDUM 1 AMD 16515 £49.00 members, £98.00 non-members

Coaxial cables

RAE/3/-/1

BS EN 50117-1:2002 Generic specification

BS EN 14480:2004 Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method CORRIGENDUM 1 AMD 16476

BS EN 12259:—

Textiles. Mattress tickings. Specification and test methods TCI/72

EH/1/4

Also incorporates Corrigendum 1.

BS EN ISO 14880-1:2005

CORRIGENDUM 1 AMD 15856 EPL/46/1

BS EN 50117-2:—

CII/34

Sectional specification for cables used in cabled distribution networks

BS EN 14598:—

BS EN 50117-2-1:2005

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)

Indoor drop cables for systems operating at 5 MHz -1000 MHz

AMENDMENT 3 AMD 16353

CORRIGENDUM 1 AMD 15858 EPL/46

FSH/18/2

BS EN 14598-2:2005

Also incorporates Amendments 1 & 2 and Corrigendum 1.

Methods of test and general requirements

BS EN 50117-2-2:2004

CORRIGENDUM 1 AMD 16460

Outdoor drop cables for systems operating at 5 MHz – 1000 MHz

PRI/42

CORRIGENDUM 1 AMD 15859

BS EN 13084:— Free-standing chimneys

EPL/46/1

BS EN 14668:2005

Brick liners. Design and execution

Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method

CORRIGENDUM 1 AMD 16482

CORRIGENDUM 1 AMD 16477

CORRIGENDUM 1 AMD 15926

B/525/13

CII/34

EPL/46/1

BS EN 13084-4:2005

BS EN 50117-2-3:2004 Distribution and trunk cables for systems operating at 5 MHz – 1000 MHz

BS EN 14764:2005

BS EN 50117-4:1996

Material for brick liners. Product specifications

City and trekking bicycles. Safety requirements and test methods

Sectional specification for distribution and trunk cables

CORRIGENDUM 1 AMD 16483

CORRIGENDUM 1 AMD 16439

CORRIGENDUM 1 AMD 15924

B/525/13

GME/25

EPL/46/1

BS EN 13084-5:2005

20

Prices may be subject to change.

Update Standards Aug 2006

BS EN 50149:2001

BS EN 60598:—

BS EN 62019:1999

Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires

Luminaires. Particular requirements

Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units

CORRIGENDUM 3 AMD 16249

BS EN 60598-2-22:1999

GEL/9

Luminaires for emergency lighting

AMENDMENT 2 AMD 15843 £56.00 members, £112.00 non-members

Also incorporates Corrigenda 1 & 2.

CORRIGENDUM 2 AMD 16331 £49.00 members, £98.00 non-members

BS EN 60079:— Electrical apparatus for explosive gas atmospheres

Also incorporates Amendment 1 and Corrigendum 1.

BS EN 62129:2006 Calibration of optical spectrum analyzers Medical electrical equipment

Flameproof enclosures ’d’ CORRIGENDUM 1 AMD 16396 GEL/31/X

BS EN 60335:— Specification for safety of household and similar electrical appliances

Also incorporates Amendment 1.

CPL/34/4

BS EN 60601:— BS EN 60079-1:2004

PEL/23/1

CORRIGENDUM 1 AMD 16488 £68.00 members, £136.00 non-members GEL/86

BS EN 60601-2-37:2001 Particular requirements for the safety of ultrasonic diagnostic and monitoring equipment CORRIGENDUM 1 AMD 16491

BS ISO 5912:2003 Camping tents

CH/62/2

AMENDMENT 1 AMD 15519 £49.00 members, £98.00 non-members

Also incorporates Amendment 1.

TCI/74

Renumbered as BS EN ISO 5912:2005.

BS EN 60335-1:2002 General requirements

BS EN 60745:—

AMENDMENT 3 AMD 16414

Hand-held motor-operated electric tools. Safety

CPL/61

BS ISO 11886:2002

Particular requirements of strapping tools

Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications

BS EN 60335-2:—

CORRIGENDUM 1 AMD 16320 £28.00 members, £56.00 non-members

Particular requirements

TECHNICAL CORRIGENDUM 1 AMD 16459 £56.00 members, £112.00 non-members

CPL/61/6

Also incorporates Amendments 1 & 2 and Corrigenda 1 & 2.

BS EN 60335-2-15:2002 Appliances for heating liquids

BS EN 60745-2-18:2004

BS EN 60950:— Information technology equipment. Safety

CORRIGENDUM 2 AMD 15893 CPL/61/07

Also incorporates Amendment 1 and Corrigendum 1.

B/513

BS ISO/IEC 14443:— Identification cards. Contactless integrated circuit(s) cards. Proximity cards

BS EN 60950-1:2006 General requirements CORRIGENDUM 1 AMD 16481

BS EN 60335-2-54:2003 Surface-cleaning appliances for household use employing liquids or steam

EPL/108

AMENDMENT 2 AMD 16454

BS EN 61249:—

CPL/61/01

Materials for printed boards and other interconnecting structures

Also incorporates Amendment 1.

BS ISO/IEC 14443-4:2001 Transmission protocol AMENDMENT 1 AMD 16407 £64.00 members, £128.00 non-members IST/17

BS ISO 17475:2005 BS EN 60432:—

BS EN 61249-2-11:2003

Safety specification for incandescent lamps

Reinforced base materials, clad and unclad. Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

BS EN 60432-1:2000 Tungsten filament lamps for domestic and similar general lighting purposes AMENDMENT 1 AMD 15764

CORRIGENDUM 1 AMD 16316 £49.00 members, £98.00 non-members

CPL/34/1

EPL/501

BS EN 60439:— Specification for low-voltage switchgear and controlgear assemblies

Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements CORRIGENDUM 1 AMD 16464 £34.00 members, £68.00 non-members ISE/NFE/8

PD IEC/TR 61912:2006 BS EN 61280:— Fibre optic communication subsystem test procedures

Application of the short-circuit ratings of lowvoltage switchgear and controlgear CORRIGENDUM 1 AMD 16492 £34.00 members, £68.00 non-members PEL/17/2

BS EN 60439-3:1991 Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards

BS EN 61280-2-11:2006 Digital systems. Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

BS 4A 102:2002

CORRIGENDUM 1 AMD 16213 PEL/17/3

CORRIGENDUM 1 AMD 16489 £56.00 members, £112.00 non-members

AMENDMENT 1 AMD 16374 £34.00 members, £68.00 non-members

Also incorporates Amendments 1 & 2.

GEL/86/3

ACE/12

Update Standards Aug 2006

Prices may be subject to change.

Specification for steel bolts (unified hexagons and unified threads) for aircraft

21

Amendments to British Standards continued... BS 4A 104:2002

BS EN 12259:—

BS EN 60335:—

Specification for corrosion-resisting steel bolts (unified hexagons and unified threads) for aircraft

Fixed firefighting systems. Components for sprinkler and water spray systems

Specification for safety of household and similar electrical appliances

BS EN 12259-2:1999

BS EN 60335-2:—

Wet alarm valve assemblies

Particular requirements

AMENDMENT 1 AMD 16375 £34.00 members, £68.00 non-members ACE/12

BS 4A 169:2002

AMENDMENT 2 £56.00 members, £112.00 non-members

Specification for aluminium alloy bolts (unified hexagons and unified threads) for aircraft

FSH/18/2

BS EN 60335-2-59:2003

Also incorporates Amendment 1 and Corrigendum 1.

Insect killers

AMENDMENT 1 AMD 16376 £34.00 members, £68.00 non-members

AMENDMENT 1 £34.00 members, £68.00 non-members

ACE/12

BS EN 12259-3:2000

CPL/61/01

Dry alarm valve assemblies

UPDATED BRITISH STANDARDS

AMENDMENT 2 £68.00 members, £136.00 non-members FSH/18/2

The following standards have been amended and the amendments have been incorporated into an updated standard.

Also incorporates Amendment 1 and Corrigendum 1.

NOTE: Updated British Standards must be reordered as the amendments are not available separately.

Gas meters. Rotary displacement gas meters

BS 598:— Sampling and examination of bituminous mixtures for roads and other paved areas

BS 598-107:2004 Method of test for the determination of the composition of design surface course rolled asphalt AMENDMENT 1 £49.00 members, £98.00 non-members B/510/1

BS 6911:— Testing earth-moving machinery

BS EN 60335-2-67:2003 Floor treatment and floor cleaning machines, for industrial and commercial use AMENDMENT 1 £49.00 members, £98.00 non-members CPL/61/10

BS EN 12480:2002 AMENDMENT 1 £64.00 members, £128.00 non-members GSE/25

BS EN 60335-2-68:2003 Spray extraction appliances, for industrial and commercial use AMENDMENT 1 £49.00 members, £98.00 non-members

BS EN 13952:2003

CPL/61/10

LPG equipment and accessories. Filling procedures for LPG cylinders AMENDMENT 1 £28.00 members, £56.00 non-members PVE/19

BS EN 50342:2001 Lead-acid starter batteries. General requirements, methods of test and numbering

BS EN 60335-2-89:2002 Commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor AMENDMENT 2 £56.00 members, £112.00 non-members CPL/61/3

Also incorporates Amendment 1.

AMENDMENT 1 £49.00 members, £98.00 non-members PEL/21

BS EN 60464:—

Also incorporates Corrigendum 1.

Varnishes used for electrical insulation

BS EN 50366:2003

BS EN 60464-3-1:2002

B/513/1

Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement

Specifications for individual materials. Ambient curing finishing varnishes

BS EN 54:—

AMENDMENT 1 £56.00 members, £112.00 non-members

BS 6911-10:1996 Machine-mounted retrieval device. Performance requirements AMENDMENT 1 £64.00 members, £128.00 non-members

Fire detection and fire alarm systems

AMENDMENT 1 £28.00 members, £56.00 non-members GEL/15/3/7

CPL/61

BS EN 54-3:2001

BS EN 60603:—

Fire alarm devices. Sounders AMENDMENT 2 £56.00 members, £112.00 non-members FSH/12

BS EN 60317:— Specification for particular types of winding wires. General requirements

Also incorporates Amendment 1.

Connectors for frequencies below 3 MHz for use with printed boards

BS EN 60603-2:1998 Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

BS EN ISO 178:2003

BS EN 60317-0-2:1998

Plastics. Determination of flexural properties

Enamelled rectangular copper

AMENDMENT 1 £49.00 members, £98.00 non-members

AMENDMENT 2 £49.00 members, £98.00 non-members

PRI/21

GEL/55

AMENDMENT 1 £74.00 members, £148.00 non-members

Also incorporates Corrigendum 1.

Also incorporates Amendment 1.

EPL/48/2

22

Prices may be subject to change.

Update Standards Aug 2006

BS EN 60730:— Automatic electrical controls for household and similar use

BS EN 60730-2-13:1998 Particular requirements for humidity sensing controls AMENDMENT 2 £28.00 members, £56.00 non-members

SPECIAL ANNOUNCEMENTS Comments can be sent by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000 PAS 78

Also incorporates Amendment 1 and Corrigendum 1.

Guide to good practice in commissioning accessible websites

BS EN 61347:—

The Disability Rights Commission (DRC) recently approached BSI about the possibility of sponsoring electronic distribution of this PAS. This has now been negotiated and the document is available free of charge from the DRC website www.drc-gb.org/pas. BSI is making the standard available online through an exclusive licencing agreement with the DRC and advising anyone that contacts us that they are able to download a free electronic copy of the standard from the DRC website. BSI is still selling the standard in hard copy and making it available to BSOL customers as well as to customers who want the standard in alternative formats.

BS EN 61347-2-8:2001 Particular requirements for ballasts for fluorescent lamps AMENDMENT 1 £49.00 members, £98.00 non-members CPL/34/3

Also incorporates Corrigendum 1.

BS EN 61951:— Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells

BS EN 61951-1:2003 Nickel-cadmium AMENDMENT 1 £56.00 members, £112.00 non-members PEL/21/1

BS ISO 1496:— Series 1 freight containers. Specification and testing

BS ISO 1496-3:1995 Tank containers for liquids, gases and pressurized dry bulk AMENDMENT 1 £56.00 members, £112.00 non-members TW/1

BS ISO 2575:2004 Road vehicles. Symbols for controls, indicators and tell-tales AMENDMENT 1 £74.00 members, £148.00 non-members

BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review.

AMENDMENT 1 £34.00 members, £68.00 non-members

Pulp in baled sheet form See BS EN ISO 801-1.

Unitized bales See BS EN ISO 801-3.

BS 6069:— Characterization of air quality

BS 6069-4.4:1993 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods EH/2

BS 7706:1993 Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws WEE/46

BS 7896:1997 Securities. Specification for the format and structure of names and addresses used in securities transactions for the business of registrars IST/12

BS EN 643:2002 Paper and board. European list of standard grades of recovered paper and board PAI/11

A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2006.

BS EN ISO 801:—

BS 2049:1976

I/-

Specification for kerosine (paraffin) lighting appliances for domestic use CW/31

Pulps. Determination of saleable mass in lots

BS EN ISO 801-1:1997 (BS 4747-1:1995) Pulp baled in sheet form

BS EN ISO 801-3:1997 (BS 4747-3:1995) Unitized bales

BS 3300:1974 Industrial trucks. Rough terrain trucks. Stability tests

BS 4747-1:—

Confirmation indicates the continuing currency of a standard.

AUE/12

BS ISO 8379:1998

Methods for determination of saleable mass, in lots, of pulp

BS 4747-3:—

CPL/72

Lamp controlgear

BS 4747:—

I/-

Specification for kerosine (paraffin) unflued space heaters, cooking and boiling appliances for domestic use CW/31

BS EN 1541:2001 Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract CW/47/3

MHE/7

BS ISO 16564:2004 Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) AMENDMENT 1 £34.00 members, £68.00 non-members

e-mail your order [email protected]

Sintered metal bushes. Determination of radial crushing strength ISE/65

BS EN ISO 2758:2003 Paper. Determination of bursting strength

PRI/23

Update Standards Aug 2006

BS EN ISO 2739:1998

PAI/11

Prices may be subject to change.

23

British Standards Proposed for Confirmation continued... BS EN ISO 2759:2003

BS M 48:1975

BS SP 66 and SP 67:1955

Board. Determination of bursting strength

Specification for dimensions of elastomeric toroidal sealing rings for aerospace use – inch series

Specifications for cable thimbles for aircraft

PAI/11

ACE/12

BS EN ISO 3325:1999

ACE/12

BS SP 94:1964 Specification for bronze oil-retaining bushes and thrust washers for aircraft

Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength

BS 6W 8:1938

ISE/65

Tie rods (swaged) (No. 4 B.A. to 1⁄2 inch B.S.F. inclusive) for aircraft purposes

ACE/12

ACE/12

BS 2SP 101-104:1956

BS 2W 11:1967

Specifications for turnbarrels, tension rods and swaged cable-end connections (unified threads) for aircraft

BS EN 13676:2001 Polymer coated paper and board intended for food contact. Detection of pinholes CW/47/3

Specification for aircraft material. Preformed corrosion-resisting steel wire rope

BS EN 24003:1993

ACE/12

Permeable sintered metal materials. Determination of bubble test pore size

BS W 13:1973

ISE/65

Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)

BS A 101:1969

ACE/12

Specification for general requirements for titanium bolts ACE/12

BS 4A 170:1999 Specification for aluminium alloy, mushroomheaded, slotted drive, bolts (unified thread) ACE/12

BS 2C 4:1973 Specification for coupling dimensions for aeroengine refrigerant pressure replenishment connections ACE/12

BS 2C 5:1976

BS C 6:1966 Specification for aircraft engine nacelle fire extinguisher doors ACE/12

BS C 9:1970

ACE/12

ACE/12

BS 6SP 4:2000

BS SP 114:1955

Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 / 1 080 MPa

Specification for eye bolts (unified threads) for aircraft

BS SP 118:1958 BS SP 8:1939

Tie rods (unified threads) for aircraft

Specification for turnbuckles (tension rod type) for aircraft purposes

ACE/12

ACE/12

BS SP 119 and SP 120:1957

BS SP 33-39:1951 Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft ACE/12

BS SP 49 and 50:1953 Specifications for ball ends for swaging on cable for aircraft (suitable for 5 cwt. cable)

Specifications for identification tags for swaged cable-end assemblies for aircraft

Coupling dimensions for aircraft ground airconditioning connections

ACE/12

ACE/12

BS SP 53:1953

BS C 18:1976

Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)

Specification for aircraft gaseous oxygen replenishment connection (inch dimensions) ACE/12

ACE/12

BS SP 54:1953 Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed noncorrodible steel wire rope for aircraft (suitable for use with British Standard W.11 wire rope) ACE/12

BS M 44:1974 Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points

BS SP 59 and SP 60:1955

ACE/12

ACE/12

24

High tensile steel fork joints (unified threads) for aircraft ACE/12

BS SP 141:1970 Specification for design and performance requirements for toggle type panel fasteners

BS SP 51 and 52:1953

BS C 20:1986

ACE/12

ACE/12

ACE/12

ACE/12

ACE/12

Specification for swaged cable-end assemblies (unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft

ACE/12

Specification for V-flange couplings for aircraft piping and ducting – metric series

Specification for swaged cable-end assemblies (unified threads) for preformed steel wire rope (W.9) for aircraft

Specification for aircraft material. Shackles

BS 2SP 1:1927

Specification for coupling dimensions for high pressure air charging valves for aircraft

BS C 10:1958

BS 2SP 105:1955

BS 2SP 106:1955

Specification for mating dimensions for liquid oxygen replenishment couplings ACE/12

ACE/12

Specifications for spring catches for aeronautical purposes

Prices may be subject to change.

ACE/12

BS SP 164:1978 Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series) ACE/12

Help Us to Help You! Always quote your Customer Number Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you

Update Standards Aug 2006

BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.

BS 159:1992 Specification for high-voltage busbars and busbar connections

BS 5225-3:1982

BS EN 1143:—

Method of photometric measurement of battery-operated emergency lighting luminaires

Secure storage units. Requirements, classification and methods of test for resistance to burglary

CPL/34/5

BS 6626:1985 Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV PEL/17/1

BS 6867:1987 Code of practice for maintenance of electrical switchgear for voltages above 36 kV

BS EN 1143-2:2001 Deposit systems GW/2

BS EN 1183:1997 Materials and articles in contact with foodstuffs. Test methods for thermal shock and thermal shock endurance CW/29

PEL/17/1

BS EN 1184:1997 BS 6878:1988 Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Materials and articles in contact with foodstuffs. Test methods for translucency of ceramic articles CW/29

PEL/17/1

BS EN 1217:1998

BS 6904:1987

Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles

PEL/17/1

Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above

BS 1376:1974

PEL/17/1

Specification for colours of light signals

CW/29

BS EN 1320:1997 Destructive tests on welds in metallic materials. Fracture tests

CPL/34/7

BS 7915:1998

WEE/2

BS 4871:—

Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments PH/9/1

Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds

Specification for approval testing of welders working to approved welding procedures

BS 7963:2000 BS 4871-3:1985 Arc welding of tube to tube-plate joints in metallic materials

Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment

WEE/36

PH/9/1

BS 4872:— Specification for approval testing of welders when welding procedure approval is not required

Structural use of concrete

BS 8110-3:1985

Fusion welding of steel

B/525/2

WEE/36

BS 9751 N0001:1980

WEE/36

Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level EPL/51

BS 4895:1981 Specification for semi-tubular rivets for general purpose use FME/6

BS EN 1388:—

BS 8110:—

BS 4872-1:1982

TIG or MIG welding of aluminium and its alloys

WEE/2

Materials and articles in contact with foodstuffs. Silicate surfaces

Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

BS 4872-2:1976

BS EN 1321:1997

BS EN 1388-1:1996 Determination of the release of lead and cadmium from ceramic ware CW/47

BS EN 1388-2:1996 Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware CW/47

BS EN ISO 6847:2001 Welding consumables. Deposition of a weld metal pad for chemical analysis WEE/39

BS EN 760:1996 Welding consumables. Fluxes for submerged arc welding. Classification

BS EN ISO 9606:— Approval testing of welders. Fusion welding

WEE/39

BS 5225:—

BS EN 1043:—

BS EN ISO 9606-3:1999

Photometric data for luminaires

Destructive tests on welds in metallic materials. Hardness testing

Copper and copper alloys WEE/36

BS 5225-1:1975

BS EN 1043-2:1997

BS EN ISO 9606-4:1999

Photometric measurements

Micro hardness testing on welded joints

Nickel and nickel alloys

CPL/34/5

WEE/2

WEE/36

Update Standards Aug 2006

Prices may be subject to change.

25

British Standards Reviewed and Confirmed continued... BS EN ISO 9606-5:2000

BS EN ISO 13919-2:2001

BS ISO 4241:2001

Titanium and titanium alloys, zirconium and zirconium alloys

Aluminium and its weldable alloys

Cinematography. Theatre projection leader, trailer and cue marks. Specifications

WEE/-/1

WEE/36

CPW/36

BS EN ISO 13920:1997 BS EN ISO 9692:— Welding and allied processes. Joint preparation

BS EN ISO 9692-3:2001 Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys WEE/1

BS EN ISO 10075:— Ergonomic principles related to mental workload

Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position WEE/-/1

BS EN ISO 14270:2001 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds

General terms and definitions PH/9

Cinematography. Colour motion-picture prints and slides for television. Density specifications CPW/36

BS ISO 12608:1996 Cinematography. Room and surround conditions for evaluating television display from telecine reproduction CPW/36

WEE/2

BS ISO 17332:2001 BS EN ISO 14271:2001

BS EN ISO 10075-1:2000

BS ISO 6036:1996

Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)

Cinematography. Manufacturer printed latent image identification information for 35mm motion-picture colour-print film. Specifications CPW/36

WEE/2

PD 6604:1997

BS EN ISO 10075-2:2000 Design principles

BS EN ISO 14272:2001

PH/9

Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds

BS EN 12875:— Mechanical dishwashing resistance of domestic utensils

Inspection of non-metallic articles CW/29

WEE/2

WEE/2

PD ES 59011:2001 BS EN ISO 14273:2001

BS EN 12875-2:2002

Destructive tests on welds in metallic materials. Etchants for macroscopic and microscopic examination

Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds

Specification for the representation of quality rules and metrics for hardware and software design languages GEL/93

WEE/2

BS EN 13133:2000 Brazing. Brazer approval

BS EN ISO 14372:2001

WEE/19

Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen

BS EN 13134:2000 Brazing. Procedure approval

WEE/39

WEE/19

BS EN ISO 13628:—

BS EN ISO 14554:—

Petroleum and natural gas industries. Design and operation of subsea production systems

Quality requirements for welding. Resistance welding of metallic materials

BS EN ISO 13628-3:2001

BS EN ISO 14554-1:2001

Through flowline (TFL) systems

Comprehensive quality requirements

PSE/17

WEE/29

BS EN ISO 13702:1999

BS EN ISO 14554-2:2001

Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines

Elementary quality requirements

PSE/17

Graphical symbols for resistance welding equipment

BS EN ISO 13703:2001 Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms PSE/17

BS EN ISO 13919:— Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to the Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2006.

WEE/29

BS 9620:1975 BS EN 27286:1992

WEE/29

BS ISO 1189:1986 Cinematography. Recorded characteristic for magnetic sound records on 35 mm motionpicture film excluding striped release prints. Specifications

Specification for quartz crystal oscillators of assessed quality. Generic data and methods of test EPL/49

This standard has been proposed for a further period of obsolescence.

BS 6V 3:1943 Specification for aircraft material. High strength plywood for aircraft

CPW/36

BS 3V 4:1929 BS ISO 3639:1981

Specification for aircraft material. Ash

Steel

Cinematography. Projection reels/spools 75 to 312 mm diameter for 8 mm type S motionpicture film. Dimensions and specifications

BS 2V 35:1966

WEE/-/1

CPW/36

BS EN ISO 13919-1:1997

26

Prices may be subject to change.

Specification for plywood for aeronautical purposes

Update Standards Aug 2006

BS 2V 37:1968

BS 7407:1991

BS 4730:1993

Specification for Sitka spruce as finished timber

Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children

Specification for UK 7-bit coded character set

BS V 38:1967

CW/15

Specification for Sitka spruce as rough timber

The preceding standards, both of which are overseen by committee CW/15, have been declared as obsolescent as they are no longer used in new products.

BS 2PL 1:1966 Specification for phenolic mouldings for aeronautical purposes

BS 3SP 3:1943 Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to 1⁄2 inch B.S.F. inclusive) ACE/12

The preceding standards, from the BS V (Timber, glues &c.), BS PL (Plastics) & BS SP (Standard Details) series overseen by committee ACE/12, have been proposed for obsolescence as having been reviewed by the committee they are no longer felt relevant.

BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

BS AU 224b:1997 Specification for portable wheel ramps for cars and light vans AUE/9

This standard has been declared obsolescent and not withdrawn as there are still large vehicles which use it.

ICT/-/1

This standard has been proposed for withdrawal as it relates to old technology which BSI experts do not support

BS 4783:— Storage, transportation and maintenance of media for use in data processing and information storage.

BS 4783-5:1991 Recommendations for 12.7 mm magnetic tape cartridges for data interchange, recording at 1491 data bytes per millimetre on 18 tracks

BS 4783-6:1993

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committe Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2006. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

BS 11:1985

Recommendations for optical disk cartridges (ODC)

BS 4783-7:1993 Recommendations for optical data disks (CD-ROM) ICT/-/1

The preceding standards, from the BS 4783 series overseen by committee ICT/-/1, have been proposed for withdrawal as they relate to old technology which BSI experts do not support

BS 4808:— Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication.

Specification for railway rails RAE/2

BS 3273:1960

BS 4808-3:1972

This standard has been declared obsolescent as it has been superseded by the BS EN 13674 suite of standards, which is now complete following the publication of BS EN 13674-4 and which should be used for new installations of track. BS 11 is not being withdrawn at this stage as it is required for the repair and maintenance of existing track.

Specification for distant indicating thermometers for ships’ refrigerated cargo spaces

Cables and equipment wires, with solid or stranded conductors, screened, single

BS 2858:1957

SME/32

BS 4808-5:1973

Specification for steel plates for use in the manufacture of galvanizing pots

The preceding standards, both of which are overseen by committee SME/32, have been proposed for withdrawal as they are no longer felt to be relevant

Cables with solid or stranded conductors, screened and sheathed, one pair

ISE/31

This standard has been declared obsolescent as it is no longer used and will not be revised.

BS 4808:— Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication

BS 4808-1:1972 General requirements and tests

BS 4808-2:1972 Equipment wires with solid or stranded conductors, unscreened, single EPL/46

The preceding standards, from the BS 4808 series overseen by committee EPL/46, have been declared obsolescent as they are no longer used.

BS 7328:1990 Specification for model steam engines and internal combustion engines for models

Update Standards Aug 2006

BS 4808-4:1974 BS 4263:1967 Specification for the marking of hatchway beams

Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples

EPL/46

The preceding standards, from the BS 4808 series overseen by committee EPL/46, have been proposed for withdrawal as they are no longer used

BS 4584:— Metal-clad base materials for printed wiring boards

BS 7009:1988 Guide to application of real-time radiography to weld inspection

BS 4584-102:—

WEE/46

Copper-clad base materials

This standard has been proposed for withdrawal as the methods it describes are no longer felt relevant

BS 4584-102.2:— Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality See BS EN 60249-2-2

BS 4584-102.14:— Phenolic paper copper-clad laminated sheet of defined quality (vertical burning test), economic quality See BS EN 60249-2-14

Prices may be subject to change.

BS 9612 N007:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49

This standard has been proposed for withdrawal as it is no longer felt to be relevant

27

British Standards Proposed for Withdrawal continued... BS EN 60249:—

BS MA 7:1983

BS MA 34:1973

Base materials for printed circuits

Specification for manholes with bolted covers

Specification for ships’ deck machinery – capstans

BS EN 60249-2:—

BS MA 9:1970

Specifications

Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes

BS EN 60249-2-2:1994 (BS 4584-102.2:1990) Phenolic cellulose paper copper-clad laminated sheet, economic quality

BS MA 35:1975 Specification for ships’ deck machinery – windlasses

BS MA 10:1971 Specification for oval eyeplates

BS MA 36:1974 Specification for ships’ deck machinery – topping winches

BS MA 11:1971 BS EN 60249-2-6:1994

Specification for horncleats

Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)

BS MA 12:—

BS EN 60249-2-14:1994 (BS 4584-102.14:1990) Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality EPL/501

The preceding standards, from the BS EN 60249-2 series overseen by committee EPL/501, have been proposed for withdrawal as the corresponding European standards have been withdrawn by CENELEC. In addition they have effectively been superseded by BS EN 61249-2-1:2005

Specification for external doors (wood) for ships Specification for welded steel bollards

Extract (appendices A and B) from PD 6430: ’The adoption of the metric system in the marine industry: report, basic programme and guide. Units of the SI, their application and use in the marine industry

BS MA 39:— Specification for ships’ ladders

BS MA 12-1:1983 Vertical type

BS MA 39-1:1973 Ladders, steel vertical

BS MA 12-2:1983 Cruciform type

BS MA 39-2:1973 Ladders, steel sloping

BS MA 13:1972 Recommendations for the co-ordination of dimensions in shipbuilding: glossary of terms

BS MA 39-3:1973 Ladders, steel dog-step

BS MA 14:1972 PD 6430/1:1970

BS MA 37:1973

Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for components and assemblies

BS MA 40:— Specification for marine guardrails, stanchions, etc

BS MA 17:1972

BS MA 40-1:1975

SME/32

Specification for derrick boom clamp

This standard has been proposed for withdrawal as it is no longer felt to be relevant

Guardrails for merchant ships (excluding passenger ships)

BS MA 19:1973 Specification for Panama-type fairleads

PD 6532:— Reference materials. Guide to the contents of certificates of reference materials

BS MA 20:1973 Specification for presentation of ships’ cargo gear particulars

BS MA 40-2:1975 Gates and portable guardrail sections for merchant ships (excluding passenger ships)

BS MA 40-3:1975 Storm rails (exterior)

PD 6532-4:1992

BS MA 21:1973

Guide to general and statistical principles for the certification of reference materials

Specification for deck-end roller fairleads

SS/6

BS MA 22:1973

ISO Guide 35 has recently been revised by ISO and the equivalent UK document PD 6532-4:1992 is thus no longer aligned with the current guidance on the topic. Responsible BSI committee SS/6 is currently considering whether to adopt ISO Guide 35:2006 as acceptable guidance in the UK, however it proposes to withdraw PD 6532-4:1992 irrespective of any decision about the revised guide. Users of ISO Guide 35 are invited to submit comments on this proposal for withdrawal by email to Programme Manager Geoff Williams ([email protected]) by no later than 31 August, 2006

Specification for cast roller fairleads

DD 254:2001 Crime reduction measures for holiday resorts and accommodation. Guidance and recommendations W/-

This standard has been proposed for withdrawal as it is no longer used

BS MA 6:1970 Specification for internal doors and frames

28

BS MA 42:1975 Specification for ships’ awnings and supports

BS MA 23:1973

BS MA 44:1974 Recommendations for the co-ordination of dimensions in shipbuilding: principles of dimensional co-ordination

Specification for multi-angle roller fairleads

BS MA 26:1973 Specification for suction strainers

BS MA 45:1974 Recommendations for the co-ordination of dimensions in shipbuilding: controlling dimensions

BS MA 27:1974 Specification for sight-flow indicators for tank overflow systems

BS MA 46:1973

BS MA 30:1973

BS MA 49:1986

Glossary of terms and graphical symbols for ships’ deck machinery

Summary and application of carbon steel tubes for marine pipework systems

BS MA 31:1973

BS MA 52:1974

Specification for ships’ deck machinery – cargo winches

Specification for ships’ deck machinery – accommodation ladder winches

BS MA 33:1973

BS MA 53:1975

Specification for ships’ deck machinery – warping winches

Specification for ships’ deck machinery – towing winches for deep sea use

Prices may be subject to change.

Specification for cast iron mudboxes

Update Standards Aug 2006

BS MA 55:1975

BS MA 94:1981

BS 5425:—

Specification for ships’ deck machinery – lifeboat winches

Specification for thermal insulation for marine piping systems

Coaxial cable for wideband distribution systems

SME/32

BS MA 56:1974 Specification for ships’ deck machinery – anchor cable stoppers

The preceding standards, all of which come from the BS MA (Marine) series and are overseen by committee SME/32, have been proposed for withdrawal as they are no longer felt to be relevant

BS MA 59:1974 Specification for sea tubes

BS MA 60:1986 Summary and application of copper and copper alloy tubes for ships’ pipework systems

BS MA 61:1974

Specification for weed grids for sea inlets

EPL/46

Superseded by Parts 1:2002, 2-1:2005, 2-2:2004, 2-3:2004, 3:1996 & 4:1996 of BS EN 50117.

BS 5649:—

If any standard in this list has been amended since publication, all amendments published to date are also withdrawn

BS 5649-2:1978

Lighting columns

Dimensions and tolerances B/509

Superseded by BS EN 40-2:2004

BS 1197:— Specification for concrete flooring tiles and fittings

BS MA 70:—

BS 1197-2:1973

Specification for dimensions of anchor chain cables

Metric units

BS MA 70-1:1975

Specification for single unit, semi-airspaced cables for wideband distribution systems

BRITISH STANDARDS WITHDRAWN

Specification for bilge drain and suction hats

BS MA 62:1974

BS 5425-1:1986

B/524

This standard has been withdrawn as it is no longer used by UK industry.

BS 5691:— Guide for the determination of thermal endurance properties of electrical insulating materials

BS 5691-4.1:1995 Ageing ovens. Single chamber ovens GEL/15

Stud-link anchor chain cables

Superseded by BS EN 60216-4-1:2006

BS 4285:— BS MA 71:1977 Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for internal subdivision

Microbiological examination for dairy purposes

BS 6782:— BS 4285-0:1990

Binders for paints

General introduction

BS MA 72:1976 Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for furniture

BS 6782-7:— BS 4285-1.1:1991 Guide to general procedures. Sampling and preparation of samples AW/9

BS MA 73:1976 Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for fixtures, fittings and equipment

The preceding standards, from the BS 4285 series overseen by committee AW/9, are superseded by BS EN ISO 8261:2002

BS 4584:— BS MA 74:— Tapers and other outboard details of propeller shafts.

BS MA 74-2:1981 Specification for shafts of diameter greater than 160 mm up to 1000 mm

Metal-clad materials for printed wiring boards

BS 4584-102.1:— Copper-clad base materials. Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality See BS EN 60249-2-1.

BS MA 75:— Specification for bulkhead pieces and tank pads

Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins. Sodium sulfite titrimetric method See BS EN ISO 9020.

BS 7020:— Analysis of iron ores

BS 7020-18:1993 Methods for the determination of magnesium content: flame atomic absorption spectrometric method ISE/58

Superseded by BS ISO 10204:2006

BS 7337:1990 Specification for tickings

BS 4737:—

TCI/66

Intruder alarm systems

Superseded by BS EN 14976:2005

BS 4737-3:—

BS EN ISO 183:2000

BS MA 75-1:1985 Bulkhead pieces of fabricated steel or copper alloy and steel pad pieces

Specifications for components

BS MA 75-2:1978 Bulkhead pieces of ductile iron (spheroidal graphite iron)

BS MA 77:1976 Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for services

BS 4737-3.4:1978

PRI/21

Radiowave Doppler detectors

This standard has been withdrawn in line with the withdrawal of the European version.

BS 4737-3.7:1978 Passive infra-red detectors

BS EN 1454:1997

GW/1

Portable, hand-held, internal combustion cutting-off machines. Safety

Specification for jib cranes: ship mounted type

The preceding standards, from the BS 4737-3 series overseen by committee GW/1, have been withdrawn as they are no longer felt relevant.

Update Standards Aug 2006

Prices may be subject to change.

BS MA 79:1978

Plastics. Qualitative evaluation of the bleeding of colorants

B/513/-/6

Superseded by BS EN ISO 19432:2006

29

British Standards Withdrawn continued... BS EN ISO 6427:1999 Plastics. Determination of matter extractable by organic solvents (conventional methods)

BS EN 61011:— Electric fence energizers

PRI/21

This standard has been withdrawn in line with the withdrawal of the European version.

BS EN ISO 9020:1998 (BS 6782-7:1996) Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins. Sodium sulfite titrimetric method STI/3

Superseded by BS EN ISO 11402:2005

BS EN 10126:1996 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state

BS EN 61011-1:1993 Safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains

BS EN 61011-2:1993 Safety requirements for battery-operated electric fence energizers not for connection to the supply mains CPL/61/01

The preceding standards, from the BS EN 61011 series overseen by committee CPL/61/01, are superseded by BS EN 60335-2-76:1999

BS CECC 32200:1989 Harmonized system of quality assessment for electronic components. Sectional specification: fixed chip capacitors with metallized electrodes and polyethylene-terephthalate dielectric for direct current EPL/40X

Superseded by BS EN 60384-19:2006

BS CECC 32201:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed chip capacitors with metallized electrodes and polyethyleneterephthalate film dielectric for direct current EPL/40X

Superseded by BS EN 60384-19-1:2006

DD ENV 1259:— BS EN 10165:1996 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state

Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters

ISE/NFE/5

The preceding standards, both of which are overseen by committee ISE/NFE/5, are superseded by BS EN 10341:2006

WEE/39

Guidelines for managing the economics of quality QS/1

DD ENV 1259-1:1994

Superseded by BS ISO 10014:2006

Requirements and test methods for establishing the rational use of energy. Radiometric method A

BS AU 229:1989 Specification for graphical symbols to designate brake fluid types in road vehicles

BS EN 12535:2000 Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification

PD ISO/TR 10014:1998

DD ENV 1259-2:1997 Requirements and test methods for establishing the rational use of energy. Radiometric method B

PRI/69

Superseded by BS ISO 9128:2006

Superseded by BS EN ISO 18276:2006

BS EN 13503:—

DD ENV 1259-3:1997

Ophthalmic implants. Intraocular lenses

Requirements and test methods for establishing the rational use of energy. Radiometric method C

BS EN 13503-5:2001

GSE/20

Biocompatibility

The preceding standards, from the DD ENV 1259 series overseen by committee GSE/20, are superseded by BS EN 416-2:2006 and BS EN 419-2:2006.

CH/172/7

Superseded by BS EN ISO 11979-5:2006

BS EN 60249:— Base materials for printed circuits

DD ENV ISO 14904:1997

BS EN 60249-2:—

Road transport and traffic telematics. Automatic fee collection (AFC). Interface specification for clearing between operators

Specifications

BRITISH STANDARDS UNDER REVIEW The following British Standards are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2006, in order to be considered by the relevant UK Committee.

EPL/278

BS EN 60249-2-1:1994 (BS 4584-102.1:1990) Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality

BS EN 60249-2-7:1994 Specification number 7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)

This standard has been withdrawn as it is not compatible with new international standards.

Measurement of liquid flow in open channels

DD ENV 50141:1994 Electromagnetic compatibility. Basic immunity standard. Conducted disturbances induced by radio-frequency fields. Immunity test GEL/210/12

This standard has been withdrawn as it is out of date.

EPL/501

The preceding standards, from the BS EN 60249-2 series overseen by committee EPL/501, are superseded by BS EN 61249-2-2:2005

BS EN 60335-2-24:1994 Particular requirements. Refrigerators, foodfreezers and ice-makers GW/1

Superseded by BS EN 60335-2-24:1999.

30

BS 3680-3B:1997 Stream flow measurement. Guide for the establishment and operation of a gauging station CPI/113

BS 4540:— BS ISO 29:1980

Sampling of spices and condiments

Cinematography. Projector usage of 8 mm type R silent motion-picture film for direct front projection. Specifications

BS 4540-1:1981

BS EN 60335:— Specification for safety of household and similar electrical appliances

BS 3680:—

BS ISO 3775:1990 Cinematography. Printed 8 mm type S image area on 16 mm motion-picture film perforated 8 mm type S (1-3). Position and dimensions

Methods of sampling AW/7

BS 4585:— Methods of test for spices and condiments

CPW/36

The preceding standards, both of which are overseen by committee CPW/36, have been withdrawn as they are no longer felt relevant.

Prices may be subject to change.

BS 4585-3:1998 Determination of total ash AW/7

Update Standards Aug 2006

BS 4585-8:1977

BS EN ISO 8662-7:1997

BS EN 50125:—

Determination of degree of fineness of grinding – hand sieving method (reference method)

Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action

Railway applications. Environmental conditions for equipment

GME/21/6

AW/7

BS EN 50125-1:1999 BS EN ISO 8662-9:1997

Equipment on board rolling stock

BS 4585-9:1998

Rammers

GEL/9/2

Determination of acid-insoluble ash

GME/21

AW/7

BS ISO TR 8363:1997 BS EN ISO 8662-10:1998

BS 4585-11:1983

Nibblers and shears

Measurement of liquid flow in open channels. General guidelines for the selection of method

Determination of volatile organic sulphur compounds in dehydrated garlic

NFE/34

CPI/113/1

AW/7

BS EN ISO 8662-13:1997 Die grinders

BS 4585-12:1983

BS EN ISO 8662-14:1997 Stone-working tools and needle scalers

BS 4585-13:1983

GME/21

Determination of colouring power of turmeric AW/7

Compressed air for general use

GME/21/6

Determination of piperine content of pepper AW/7

BS ISO 8573:—

BS EN ISO 10819:1997

BS ISO 8573-1:2001 Contaminants and purity classes MCE/8

BS ISO 9123:2001 Measurement of liquid flow in open channels. Stage-fall-discharge relationships

Determination of filth

Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

AW/7

PH/3/8

BS EN 1299:1997

BS EN 12786:1999

Mechanical vibration and shock. Vibration isolation of machines. Information for the application of source isolation

Safety of machinery. Guidance for the drafting of vibration clauses of safety standards

ACE/12

GME/21

BS 4A 114:1999

BS 4585-14:1983

BS 4A 113:1999

GME/21

BS EN ISO 13090:— BS EN ISO 5349:— Mechanical vibration. Measurement and evaluation of human exposure to handtransmitted vibration

CPI/113/1

Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people

Specification for cadmium-plated, mushroomheaded, unified-thread, slotted drive, bolts

Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength class 880/1080) ACE/12

BS A 211:1961

General requirements

Exposure to whole-body mechanical vibration and repeated shock

Specification for 100° countersunk head steel bolts (unified threads and cruciform recesses) for aircraft

GME/21/6

GME/21

ACE/12

BS EN ISO 5349-2:2002

BS EN 13490:2002

BS 4A 228:1997

Practical guidance for measurement at the workplace

Mechanical vibration. Industrial trucks. Laboratory evaluation and specification of operator seat vibration

Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in) for aircraft

BS EN ISO 13090-1:1998 BS EN ISO 5349-1:2001

GME/21/6

ACE/12

GME/21

BS EN ISO 5828:2001 Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics WEE/29

BS SP 144-147:1971 BS EN ISO 13753:1999 Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

Specification for corrosion resisting worm drive clamps for aircraft ACE/12

GME/21

Please

BS EN ISO 7284:1996 Resistance welding equipment. Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry

BS EN 21089:1992 Electrode taper fits for spot welding equipment. Dimensions WEE/29

WEE/29

BS EN ISO 8662:—

BS EN 30326:—

Hand-held portable power tools. Measurement of vibrations at the handle

Mechanical vibration. Laboratory method for evaluating vehicle seat vibration

BS EN ISO 8662-6:1995

BS EN 30326-1:1994

Impact drills

Basic requirements

GME/21

GME/21

Update Standards Aug 2006

do not send confirmation of orders placed by telephone as it can lead to

Prices may be subject to change.

duplication

31

New Work Started

NEW WORK STARTED

BS EN 1230-3 (Revision)

BS EN ISO 12947:—

Off-flavour (taint)

Textiles. Determination of the abrasion resistance of fabrics by the Martindale method

The reference number of the committee responsible for each item of new work started is given after each entry.

will supersede BS EN 1230-2:2001

Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

BS EN 1382 (Revision)

PAI/11

BS EN ISO 12947-1:1998/Corrigendum Martindale abrasion testing apparatus Timber structures. Test methods. Withdrawal capacity of timber fasteners will supersede BS EN 1382:1999 B/518

TCI/24

BS EN ISO 12947-2:1998/Corrigendum Determination of specimen breakdown TCI/24

BS 5306:— Fire extinguishing installations and equipment on premises

BS EN 1383

BS EN ISO 12947-3:1998/Corrigendum

Timber structures. Test methods. Pull through resistance of timber fasteners

Determination of mass loss

BS 5306-3 (Revision)

B/518

CoP for inspection and maintenance of portable fire extinguishers will supersede BS 5306-3:2003 FSH/2

BS EN ISO 12947-4:1998/Corrigendum BS EN 1515:— Flanges and their joints. Bolting

BS 5306-8 (Revision)

BS EN 1515-3 (Revision)

CoP for selection and installation of portable fire extinguishers

Classification of bolt materials for steel flanges, class designated

will supersede BS 5306-8:2000

will supersede BS EN 1515-3:2005

FSH/2

PSE/15

BS 8213:—

BS 8213-4 (Revision)

Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers

Code of practice for the survey and installation of windows and external doorsets will supersede BS 8213-4:1990

BS EN ISO 1628-3 (Revision)

B/538

Polyethylenes and polypropylenes will supersede BS EN ISO 1628-3:2003

BS EN 1713 (Revision)

BS EN 54:— Fire detection and fire alarm systems

BS EN 54-1 (Revision) Introduction

Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds will supersede BS EN 1713:1998 WEE/46

BS EN 1865 (Revision) Specification for stretchers and other patient handling equipment used in road ambulances will supersede BS EN 1865:2000 CH/239

will supersede BS EN 54-1:1996 FSH/12

BS EN 1194 (Revision) Timber structures. Glued laminated timber. Strength classes and determination of characteristic values will supersede BS EN 1194:1999 B/518

BS EN 1230:— Paper and board intended for contact with foodstuffs. Sensory analysis

Free-standing chimneys

BS EN 13084-1 (Revision) General requirements

BS EN 13126:— Building hardware. Requirements and test methods for windows and door height windows

BS EN 13126-7 (Revision) Finger catches B/538/4

BS EN 13361:2004/Amendment 1

GEL/20/18

B/505

BS EN 13084:—

PRI/82

Fire integrity of power cables. Test method

Fabricated access and duct cover systems with a clear opening in excess of 1m for vehicular and pedestrian areas

TCI/24

B/525/13

Windows, doors and rooflights

BS 9124

Assessment of appearance change

will supersede BS EN 13084-1:2000

BS EN ISO 1628:—

BS 8491

TCI/24

Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams B/553

BS EN 13491:2004/Amendment 1 Geosynthetic barriers. Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures B/553

BS EN 13492:2004/Amendment 1 Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

BS EN ISO 4404:—

B/553

Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids

BS EN 14250 (Revision)

BS EN ISO 4404-1

Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners

Water-containing fluids

will supersede BS EN 14250:2004

will supersede BS ISO 4404-1:2001

B/518

MCE/18/-/16

BS EN 14255:— BS EN 12663 (Revision)

Measurement and assessment of personal exposures to incoherent optical radiation

Odour

Railway applications. Structural requirements of freight wagon vehicle bodies

BS EN 14255-3

will supersede BS EN 1230-1:2001

will supersede BS EN 12663:2000

UV-radiation emitted by the sun

PAI/11

RAE/1/-/2

CPL/34/10

BS EN 1230-1 (Revision)

32

Prices may be subject to change.

Update Standards Aug 2006

BS EN ISO 14644:—

BS EN 60601:—

BS EN 62192

Cleanrooms and associated controlled environments

Medical electrical equipment

Live working. Insulating ropes

BS EN ISO 14644-1 (Revision)

BS EN 60601-2:—

Classification of air cleanliness

PEL/78

Particular requirements

will supersede BS EN ISO 14644-1:1999 LBI/30

BS EN ISO 14644-2 (Revision) Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

BS EN 60601-2-35 (Revision) Safety of blankets, pads and mattresses, intended for heating in medical use will supersede BS EN 60601-2-35:1997 CH/62/4

BS EN 62467:— Medical electrical equipment. Dosimetric instruments as used in brachytherapy

BS EN 62467-1 Instruments based on well-type ionization chambers CH/62/3

will supersede BS EN ISO 14644-2:2000 LBI/30

BS EN 60601-2-43 (Revision)

BS EN ISO 14744:—

Safety of X-ray equipment for interventional procedures

Welding. Acceptance inspection of electron beam welding machines

will supersede BS EN 60601-2-43:2001 CH/62/2

BS EN 00124095 Timber structures. Test methods. Torsional strength and resistance to driving of screws B/518

BS EN ISO 14744-1 (Revision) Principles and acceptance conditions

BS EN 60743:2001/Amendment 1

will supersede BS EN ISO 14744-1:2001

Live working. Terminology for tools, equipment and devices

WEE/-/1

BS EN 00124096 Timber structures. Test methods. Withdrawal capacity of punched metal plate fasteners B/518

PEL/78

BS EN ISO 15496:2004/Corrigendum Textiles. Measurement of water vapour permeability of textiles for the purpose of quality control TCI/24

BS EN ISO 17663 Welding. Quality requirements for heat treatment in connection with welding and allied processes will supersede PD CR ISO 17663:2001 WEE/-/1

BS EN ISO 23297 Thermoplastics hoses and hose assemblies. Wire of synthetic yarn reinforced singe-pressure types for hydraulic applications. Specification PRI/66

BS EN ISO 25137:— Plastics sulfone plastics (SP) moulding and extrusion materials

BS EN 60966:—

BS EN 00248382

Radio frequency and coaxial cable assemblies

Textiles. Filling material. Rubbing test method for determining the fibre-proof properties of fabrics

BS EN 60966-2:— Detail specification

TCI/24

BS EN 60966-2-4 (Revision)

BS EN 00351001

Cable assemblies for radio and TV receivers. Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors

Construction products. Assessment of release of dangerous substances. Barriers to trade

EPL/46

BS EN 00351002

BS EN 60966-2-5 (Revision) Cable assemblies for radio and TV receivers. Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors

Designation system and basis for specifications PRI/82

BS EN ISO 25137-2 Preparation of test specimens and determination of properties PRI/82

BS EN 50138:— Alarm systems. Monitoring and alarm receiving centre

BS EN 50138-1

Construction products. Assessment of release of dangerous substances. The concept of horizontal testing procedures B/557

will supersede BS EN 60966-2-5:2003

BS EN 00351003

EPL/46

BS EN 60966-2-6 (Revision) BS EN ISO 25137-1

B/557

will supersede BS EN 60966-2-4:2003

Cable assemblies for radio and TV receivers. Frequency range 0 to 3 000 MHz, IEC 61169-24 connectors

Construction products. Assessment of release of dangerous substances. Methodologies for without testing and without further testing B/557

will supersede BS EN 60966-2-6:2003

BS EN 00351004

EPL/46

Construction products. Assessment of release of dangerous substances. Use of harmonised horizontal assessment methods

BS EN 61000:—

B/557

Electromagnetic compatibility (EMC) limits

BS EN 00351005 BS EN 61000-3-2:2006/Amendment 1 Limits for harmonic current emissions (equipment input current = 16 A per phase)

Construction products. Assessment of release of dangerous substances. Sampling and sampling plans for harmonised test specifications

GEL/210/8

B/557

BS EN 61223:—

BS EN 00351006

Evaluation and routine testing in medical imaging departments

Construction products. Assessment of release of dangerous substances. Content of regulated dangerous substances in construction products

Requirements GW/1/11

BS EN 50290:— Communication cables

BS EN 61223-3-1 (Revision) BS EN 50290-2-26:2002/Amendment 1 Common design rules and construction. Halogen free flame retardant insulation compounds EPL/46

Update Standards Aug 2006

Acceptance tests. Imaging performance of X-ray equipment for radiographic and radioscopic systems

B/557

BS EN 00351007

will supersede BS EN 61223-3-1:1999

Construction products. Assessment of release of dangerous substances. Leaching methods

CH/62/2

B/557

Prices may be subject to change.

33

New Work Started continued... BS EN 00351008

BS ISO 11596

BS ISO 22867:2004/Corrigendum

Construction products. Assessment of release of dangerous substances. Eluate and extract analysis

Sampling of the precious metal alloys in jewellery and associated products

Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles

STI/53

B/557

AGE/29

BS ISO 12176:— BS EN 00351009 Construction products. Assessment of release of dangerous substances. Methods for generation of emission into indoor air B/557

Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems

BS ISO 23185

BS ISO 12176-2

Assessment and benchmarking of terminological data holdings. General concepts and principles

Electrofusion

TS/1

PRI/88/2

BS EN 00351010 Construction products. Assessment of release of dangerous substances. Analysis of emissions into indoor air B/557

BS ISO 24113 BS ISO 15093 Determination of precious metals in 999 % gold, platinum and palladium jewellery alloys by difference method using ICP-OES (inductively coupled plasma optical emission spectroscopy)

Space systems. Orbital debris. Routes to compliance and management for debris mitigation ACE/68/-/9

STI/53

BS EN 00351011 Construction products. Assessment of release of dangerous substances. Measurement of radiation

BS ISO 24631:— BS ISO 15096

B/557

Determination of silver in 999/1000 silver jewellery alloys by difference method using ICP-OES (inductively coupled plasma optical emission spectroscopy)

BS EN 00351012

STI/53

Construction products. Assessment of release of dangerous substances. Assessment of potential growth of relevant micro-organisms

BS ISO 15302

B/557

BS ISO 5667:— Water quality. Sampling

Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reversedphase high performance liquid chromatography method will supersede BS 684-2.47:1998

BS ISO 24631-1 ISO 11784/11785 conformance evaluation of RFID transponders including granting and use of a manufacturer code AGE/6

BS ISO 24631-2 ISO 11784/11785 conformance evaluation of RFID transceivers AGE/6

AW/307

BS ISO 5667-11

BS ISO 15394 (Revision)

Guidance on the sampling of groundwaters

Bar code and two-dimensional symbols for shipping, transport and receiving labels

will supersede BS 6068-6.11:1993, will partially supersede BS ISO 5667-18:2001

Agricultural equipment. Radio frequency identification of animals

BS ISO 24631-3 ISO 11784/11785 performance evaluation of RFID transponders AGE/6

will supersede BS ISO 15394:2000

EH/3/6

PKW/0

BS ISO 6550:—

BS ISO 16110:—

ISO 11784/11785 performance evaluation of RFID transceivers

Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing

Hydrogen generators using fuel processing technologies

AGE/6

BS ISO 16110-2

BS ISO/IEC TR 24729:—

Test methods for performance

Information technology. Radio frequency identification for item management. Implementation guidelines

BS ISO 6550-4 (Revision) M8 x 1 glow-plugs

BS ISO 24631-4

PVE/18

will supersede BS ISO 6550-4:2005 MCE/9

BS ISO 20432 Guide to the determination of long-term strength of geosynthetics for soil reinforcement

BS ISO/IEC TR 24729-1

B/553

IST/34

BS ISO 21218

BS ISO/IEC TR 24729-2

PRI/88/4

Intelligent transport systems. Continuous air interface, long and medium range (CALM). Medium service access points

Recycling and RF tags

BS ISO 10434 (Revision)

EPL/278

Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries

BS ISO 21244

BS ISO 10147:2004/Amendment 1 Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of cross-linking by determination of the gel content. Amendment 1

will supersede BS ISO 10434:2004 PSE/7

BS ISO 10555:— Sterile, single-use intravascular catheters

RFID-enabled labels

IST/34

BS ISO/IEC 24754 Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement ring hitches and attachment to tractor drawbars

Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems IST/41

AGE/6

BS ISO 25111 BS ISO 22179

will supersede BS EN ISO 10555-1:1997

Intelligent transport systems. Full speed range adaptive cruise control systems. Performance requirements and test procedures

Intelligent transport systems. Continuous airinterface, long and medium range (CALM). ITS using mobile wireless broadband. General requirements

CH/84

EPL/278

EPL/278

BS ISO 10555-1 (Revision) General requirements

34

Prices may be subject to change.

Update Standards Aug 2006

BS ISO 25157

BS IEC 60331-25

DD CENELEC/TS 50131:—

Oil of rose, Chinese Kushui type

Procedures and requirements. Optical fibre cables

Alarm systems. Intrusion systems

GEL/20/18

DD CENELEC/TS 50131-2-7:—

AW/54

Intrusion detectors

BS ISO 26985 Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue PRI/60

BS IEC 60684:— Flexible insulating sleeving

DD CENELEC/TS 50131-2-7-1 Glass break detectors (acoustic)

BS IEC 60684-3:—

GW/1

Specifications for individual types of sleeving

DD CENELEC/TS 50131-2-7-2 BS ISO 26986 Resilient floor coverings. Expanded (Cushioned) polyvinyl chloride floor covering. Specification PRI/60

BS IEC 60684-3-205

Glass break detectors (passive)

Heat-shrinkable polychloroprene sleeving, flame retarded, shrink ratio 1, 7. 1

GW/1

GEL/15/3/5

DD CENELEC/TS 50131-2-7-3

BS IEC 60684-3-247 BS IEC/PAS 62483 Measuring whisker growth on tin and tin alloy surface finishes

Heat-shrinkable, polyolefin sleeving, adhesive coated, not flame retarded, shrink ratio 3. 1 GEL/15/3/5

EPL/47

BS IEC 60034:— Rotating electrical machines

GW/1

DD CENELEC/TS 50398 (Revision) Alarm systems. Combined and integrated systems. General requirements

BS IEC 61318

will supersede DD CLC/TS 50398:2002

Live working. Conformity evaluation applicable to tools, devices and equipment

GW/1

PEL/78

BS IEC 60034-18-42

Glass break detectors (active)

DD ISO/PAS 27145:— Road vehicles. Implementation of WWH-OBD communication requirements

Acceptance tests for type II electrical insulation systems used in rotating electrical machines fed from voltage converters

BS IEC 61340:—

PEL/2

BS IEC 61340-5-3

General information and use case definition AUE/16

BS IEC 60034-20-2

Protection of electronic devices from electrostatic phenomena. Test methods for packaging intended for electrostatic discharge sensitive devices

Guide for the design and performance of brushless permanent magnet (BPM) servo motors specifically designed for converter supply PEL/2

Electrostatics

DD ISO/PAS 27145-1

GEL/101

BS IEC 61482:—

BS IEC 60191:—

Live working. Protective clothing against the thermal hazards of an electric arc

Semiconductor devices. Micro-electromechanical devices

BS IEC 61482-2 PEL/78

Dimensions EPL/47

Safety of machinery. Electrical equipment of machines

BS IEC 62024-2

GEL/44

DD ISO/PAS 27145-3 Common message dictionary

DD ISO/PAS 27145-4 Connection between vehicle and test equipment AUE/16

High frequency inductive components. Electrical characteristics and measuring methods

Requirements for semiconductor fabrication equipment

AUE/16

BS IEC 62024:—

BS IEC 60204:—

BS IEC 60204-33

Common emissions-related data dictionary

AUE/16

Requirements

BS IEC 60191-2:1966/Amendment 12

DD ISO/PAS 27145-2

Rated current of inductors for D.C./D.C. converter EPL/51

BS IEC 62462

DD IEC TS 62224 Multimedia home server systems. Conceptual model for digital rights management EPL/100

PD ISO/TR 3253 Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes. Listing of connections which are either standardised or in common use

BS IEC 60268:—

Ultrasonics power measurement. Guide for the maintenance of ultrasound physiotherapy systems

Sound system equipment

EPL/87

PD ISO/TR 27609

BS IEC 62484

Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round robin test

BS IEC 60268-7 Headphones and earphones will supersede BS EN 60268-7:1996 EPL/100

Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material NCE/2

BS IEC 60331:— Tests for electric cables under fire conditions. Circuit integrity

BS IEC 60331-21

WEE/18

MCE/8/-/2

PAS 23:— General performance requirements for door assemblies

DD 1722:— Fences

PAS 23-1:1999/Amendment 4

DD 1722-18

Single leaf, external door assemblies to dwellings

Specification for the minimum requirements of a steel mesh site perimeter temporary fencing system

B/538/1

Procedures and requirements. Electric data cables GEL/20/18

B/201

Business relationship management. Guidance

Update Standards Aug 2006

Prices may be subject to change.

PAS 11000

35

Draft British Standards for Public Comment

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents will be charged more according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2006 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards.

06/30079861 DC

06/30115645 DC

ISO 15484 Road vehicles. Brake linings friction materials. Product definition and quality assurance

IEC 60601-1-9 Medical electrical equipment. Part 1-9. General requirements for basic safety and essential performance. Collateral standard. Requirements for the reduction of environmental impacts

AUE/11

Comments for the above document are required by 31 October, 2006

06/30086672 DC

06/30116899 DC

BS ISO 5832-12 Implants for surgery. Metallic materials. Part 12. Wrought cobalt-chromiummolybdenum alloy

ISO 19092-2 Financial services. Biometrics. Part 2. Message syntax and cryptographic requirements

CH/150/1

IST/12

Comments for the above document are required by 31 August, 2006

06/30117277 DC 06/30093871 DC EN ISO 23973 Ergonomics of human-system interactions. Part 151. Guidance on World Wide Web user interfaces PH/9

ISO 9249 Earth-moving machinery. Engine test code. Net power B/513/1

06/30121986 DC

06/30094541 DC ISO 21534 Non-active surgical implants. Joint replacement implants. Particular requirements

05/30128077 DC

CH/62/1

CH/150/4

ISO 17412 Oil of fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare) AW/54

06/30123267 DC

National Annex to BS EN 1992-2 Eurocode 2. Design of concrete structures. Part 2. Concrete bridges. Design and detailing rules

Comments for the above document are required by 31 August, 2006

B/525/2

06/30094759 DC

EPL/46

EN ISO 9241-171 Ergonomics of human-system interaction. Part 171. Guidance on software accessibility

06/30123274 DC

Comments for the above document are required by 15 September, 2006

05/30128176 DC National Annex to BS EN 1994-2 Eurocode 4. Design of composite steel and concrete structures. Part 2: General rules and rules for bridges

EN 50290-2-21/prA 1 Communication cables. Part 2-21. Common design rules and construction. PVC insulation compounds

EN 50290-2-22/prA1 Communication cables. Part 2-22. Common design rules and construction. PVC sheathing compounds

PH/9

06/30099300 DC BS ISO 5832-1 Implants for surgery. Metallic materials. Part 1. Wrought stainless steel

EPL/46

B/525/4

CH/150/1

Comments for the above document are required by 15 September, 2006

06/30123277 DC

Comments for the above document are required by 31 August, 2006

EN 50290-2-27/prA1 Communication cables. Part 2-27. Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds

05/30128357 DC

06/30099306 DC

National Annex to BS EN 1992-3 Eurocode 2. Design of concrete structures. Part 3: Liquid retaining and containment structures

BS ISO 5832-9 Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

B/525/2

CH/150/1

Comments for the above document are required by 15 September, 2006

Comments for the above document are required by 31 August, 2006

06/19977151 DC

06/30100671 DC

BS ISO 13779-3 Implants for surgery. Hydroxyapatite. Part 3. Chemical analysis and characterization of crystallinity and phase purity

ISO/IEC 19793 Information technology. Open distributed processing. Use of UML for ODP system specifications. £18.00 members, £36.00 non-members

CH/150/1

Comments for the above document are required by 31 August, 2006

06/19985925 DC BS ISO 5492 Sensory analysis. Vocabulary AW/12

06/30079647 DC BS EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz. 300 GHz) GEL/106

Comments for the above document are required by 31 October, 2006

36

IST/15

EPL/46

06/30128374 DC National Annex to BS EN 1996-1-1 Eurocode 6. Design of masonry structures. Part 1-1. General rules for reinforced and unreinforced masonry structures B/525/6

06/30128382 DC National Annex to BS EN 1996-1-2 Eurocode 6. Design of masonry structures. Part 1-2. General rules. Structural fire design B/525/6

06/30101835 DC ISO 13356 Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)

06/30129284 DC

CH/150/1

WEE/19

Comments for the above document are required by 31 August, 2006

06/30133708 DC

06/30105469 DC BS ISO 7206-8 Implants for surgery. Partial and total hip joint prostheses. Part 8. Endurance performance of stemmed femoral components CH/150/4

Prices may be subject to change.

EN 1044 Brazing. Filler metals

ISO 21003-1 Multilayer piping systems for hot and cold water installations inside buildings. Part 1. General PRI/88/2

Comments for the above document are required by 31 October, 2006

Update Standards Aug 2006

06/30133711 DC

06/30143284 DC

06/30147393 DC

ISO 21003-2 Multilayer piping systems for hot and cold water installations inside buildings. Part 2. Pipes

ISO/IEC 21827 Information technology. Systems security engineering. Capability maturity model (SSE-CMM) £18.00 members, £36.00 non-members

ISO 18115 AMD 2 Surface chemical analysis. Vocabulary

PRI/88/2

Comments for the above document are required by 31 October, 2006

IST/33

Comments for the above document are required by 31 October, 2006

06/30133714 DC ISO 21003-3 Multilayer piping systems for hot and cold water installations inside buildings. Part 3. Fittings PRI/88/2

Comments for the above document are required by 31 October, 2006

06/30143831 DC ISO 21535 Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants CH/150/4

Comments for the above document are required by 31 August, 2006

06/30133717 DC ISO 21003-5 Multilayer piping systems for hot and cold water installations inside buildings. Part 5. Fitness for purpose of the system PRI/88/2

Comments for the above document are required by 31 October, 2006

06/30143888 DC ISO 21536 Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants

WEE/46

Comments for the above document are required by 31 October, 2006

06/30135842 DC ISO/DIS 945-1 Designation of microstructure of cast irons. Part 1. Graphite classification by visual analysis ISE/35

Comments for the above document are required by 31 October, 2006

06/30147757 DC BS 434-2 Bitumen road emulsions. Part 2. Code of practice for the use of cationic bitumen emulsions on roads and other paved areas B/510

06/30149459 DC IEC 60331-13 Tests for electric cables under fire conditions. Circuit integrity. Part 13. Apparatus. Fire with shock at a temperature of at least 830°C for cables with an overall diameter not exceeding 20mm GEL/20/18

06/30149463 DC

Comments for the above document are required by 31 August, 2006

IEC 60331-32 Tests for electric cables under fire conditions. Circuit integrity. Part 32. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm

06/30145152 DC ISO 15874-3:2003 AMD 1 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Part 3. Fittings

GEL/20/18

PRI/88/2

Comments for the above document are required by 31 October, 2006

06/30145404 DC

06/30151472 DC BS EN 4534-2 Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series

BS EN 61970-402 Energy management system application program interface (EMS-API). Part 402. Component interface specification (CIS). Common services

ACE/12

PEL/57

BS EN 4535-2 Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series

06/30138405 DC ISO 8539 Forged steel components for lifting slings. Grade 8

Comments for the above document are required by 31 October, 2006

CH/150/4

06/30134306 DC EN ISO 12718 Non-destructive testing. Eddy current testing. Vocabulary

CII/60

06/30145409 DC

06/30151475 DC

BS EN 61970-403 Energy management system application program interface (EMS-API). Part 403. Component interface specification (CIS). Generic data access

ACE/12

ISO 13837 Road vehicles. Safety glazing materials. Method for the determination of solar transmittance

PEL/57

AUE/10

BS EN 61970-404 Energy management system application program interface (EMS-API). Part 404. Component interface specification (CIS). High speed data access

BS EN 4536-2 Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series

MHE/1

06/30138897 DC

06/30139700 DC IEC 60601-2-37 Medical electrical equipment. Part 2-37. Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment CH/62/2

06/30139771 DC EN 419-1 Non-domestic gas-fired overhead luminous radiant heaters. Part 1. Safety

06/30145415 DC

ISO 19933 Space systems. Format for spacecraft launch environment test report ACE/68/-/2

ACE/12

06/30151481 DC

PEL/57

06/30145419 DC BS EN 61970-405 Energy management system application program interface (EMS-API). Part 405. Component interface specification (CIS). Generic eventing and subscription

BS EN 4537-2 Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load. Part 2. Dimensions and loads. Inch series ACE/12

PEL/57

06/30151487 DC

06/30145425 DC

BS EN 60335-2-95/prA1 Household and similar electrical appliances. Safety. Part 2-95. Particular requirements for drives for vertically moving garage doors for residential use

GSE/20

06/30140973 DC

06/30151478 DC

BS EN 61970-407 Energy management system application program interface (EMS-API). Part 407. Component interface specification (CIS). Time series data access PEL/57

CPL/61/01

06/30151492 DC

06/30141618 DC ISO 8537 Sterile single-use syringes, with or without needle, for insulin

06/30147293 DC EN 15532 Cycles. Terminology

BS EN 60745-2-5/prA1 Hand-held motoroperated electric tools. Part 2-5. Particular requirements for circular saws

CH/84

GME/25

CPL/61/6

Update Standards Aug 2006

Prices may be subject to change.

37

Draft British Standards for Public Comment continued... 06/30151546 DC

06/30151792 DC

06/30151995 DC

BS EN 4613 Aerospace series. Spherical plain bearings in corrosion resisting steel with self lubricating liner, narrow series. Dimensions and loads. Inch series

BS ISO 23317 Implants for surgery. In vitro measurement for apatite-forming ability of implant materials

BS ISO 22239-3 Road vehicles. Child seat presence and orientation detection system. Part 3. Labelling

CH/150/1

AUE/7

ACE/12

Comments for the above document are required by 31 August, 2006

06/30152010 DC

06/30151549 DC BS EN 4614 Aerospace series. Spherical plain bearings in corrosion resisting steel with self lubricating liner, wide series. Dimensions and loads. Inch series ACE/12

06/30151798 DC BS IEC 60664-5 Insulation coordination for equipment within low-voltage systems. Part 5. A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

06/30151625 DC

GEL/109

BS IEC TR 61912-1 Application of the shortcircuit ratings of low-voltage switchgear and control gear

06/30151831 DC

PEL/17/2

06/30151633 DC BS IEC 60603-7-41 Connectors for electronic equipment. Part 7-41. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmission with frequencies up to 500 MHz EPL/48

06/30151637 DC BS IEC 60603-7-51 Connectors for electronic equipment. Part 7-51. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 500 MHz EPL/48

BS EN 50290-2-26/prA1 Communication cables. Part 2-26. Common design rules and construction. Halogen free flame retardant insulation compounds

ACE/12

06/30152057 DC BS EN ISO 15103-2 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties PRI/82

06/30152061 DC

EPL/46

BS EN ISO 3451-1 Plastics. Determination of ash. General methods

06/30151841 DC BS IEC 62045-1 Multimedia security. Guideline for privacy protection of equipment and systems in use and disused. Part 1. General EPL/100

06/30151844 DC

PRI/21

06/30152065 DC BS EN ISO 6401 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method

BS EN 9121 Aerospace series. Quality management systems. Assessment applicable to stockist distributors

PRI/21

ACE/1

06/30152154 DC BS ISO 23481 Tools for pressing. Cam driver plates

06/30151642 DC BS IEC 60603-7-71 Connectors for electronic equipment. Part 7-71. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz

EN 2755 Aerospace series. Bearings, spherical, plain, in corrosion resisting steel, with selflubricating liner. Elevated load at ambient temperature. Technical specification

06/30151847 DC

MTE/12

BS IEC 62457 Home network communication protocol over TCP/IP for multimedia household appliances (TC 100)

06/30152176 DC

EPL/100

EPL/48

prEN 14500 Blinds and shutters. Thermal and visual comfort. Test and calculation method B/538/3

06/30151668 DC BS ISO 9183-1 Tools for pressing. Wear plates for press dies. Part 1. Type A MTE/12

06/30151880 DC BS EN 15512 Steel static storage systems. Adjustable pallet racking systems. Principles for structural design £18.00 members, £36.00 non-members MHE/8

06/30151671 DC BS ISO 16366 Tools for pressing. L-shaped guides

Comments for the above document are required by 25 August, 2006

06/30152213 DC BS EN 60603-7-1 ED 2. Connectors for electronic equipment. Part 7-1. Detail specification for 8-way, shielded, free and fixed connectors EPL/48

Comments for the above document are required by 31 August, 2006

MTE/12

06/30151883 DC 06/30151675 DC IEC 60601-2-33 AMD 2 Medical electrical equipment. Part 2-33. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis

BS IEC 61073-1 Mechanical splices and fusion splice protectors for optical fibres and cables. Part 1. Generic specification

BS EN 60851-5 ED 4. Winding wires. Test methods. Part 5. Electrical properties

GEL/86/2

GEL/55

CH/62/2

06/30151989 DC

06/30151783 DC

BS ISO 22239-1 Road vehicles. Child seat presence and orientation detection system (ISOcare). Part 1. Specifications and test methods

BS ISO/IEC 15459-6 Information technology. Unique identifiers. Part 6. Unique identifiers for product groupings in material lifecycle management IST/34

AUE/7

06/30152218 DC

Comments for the above document are required by 31 August, 2006

06/30152241 DC BS IEC 60745-2-22 Hand-held motor-operated electric tools. Safety. Part 2-22. Particular requirements for cut-off machines. CPL/61/6

06/30151992 DC 06/30152260 DC

BS ISO 23480 Tools for pressing. Sliding plates

BS ISO 22239-2 Road vehicles. Child seat presence and orientation detection system (ISOcare). Part 2. Resonator specification

BS IEC 61000-4-6 Amd 3 Measurement uncertainty

MTE/12

AUE/7

GEL/210/12

06/30151787 DC

38

Prices may be subject to change.

Update Standards Aug 2006

06/30152305 DC

06/30152367 DC

06/30152634 DC

BS ISO 15263-4 Road vehicles. Rear load vehicles. Part 4. Bicycle carriers

BS IEC 62447-3 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-12. Part 3. Data stream format (TA6)

BS IEC 62433 Models of integrated circuits for EMI behavioural simulation

AUE/9

Comments for the above document are required by 14 August, 2006

EPL/100

06/30152373 DC 06/30152308 DC IEC 60601-2-50 Medical electrical equipment. Part 2-50. Particular requirements for basic safety and essential performance of infant phototherapy equipment CH/62/4

06/30152315 DC BS EN 12720 Furniture. Assessment of surface to cold liquids FW/1

Comments for the above document are required by 31 October, 2006

06/30152318 DC BS EN 12721 Furniture. Assessment of surface resistance to wet heat FW/1

Comments for the above document are required by 31 October, 2006

BS ISO/IEC 15939 Software and systems engineering. Measurement process IST/15

06/30152376 DC BS EN ISO 1873-2 Plastics. Polypropylene (PP) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties PRI/82

06/30152427 DC BS EN 15199-3 Petroleum products. Determination of boiling range distribution by gas chromatography method. Part 3. Crude oil

EPL/47

Comments for the above document are required by 31 October, 2006

06/30152649 DC BS IEC 60034-4 Rotating electrical machines. Part 4. Methods for determining synchronous machine quantities from tests PEL/2

Comments for the above document are required by 31 October, 2006

06/30152653 DC BS IEC 61360-1 Standard data element types with associated classification scheme for electric components. Part 1. Definitions. Principles and methods GEL/3

PTI/13

Comments for the above document are required by 31 October, 2006

06/30152441 DC

06/30152769 DC

BS ISO 7304-2 Durum wheat semolinas and alimentary pasta. Estimation of cooking quality of spaghetti by sensory analysis. Part 2. Practical method

BS EN 15457 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi STI/28

AW/4

06/30152772 DC

06/30152321 DC BS EN 12722 Furniture. Assessment of surface resistance to dry heat FW/1

Comments for the above document are required by 31 October, 2006

06/30152340 DC BS EN 15221-1 Facility management. Part 1. Terms and definitions FMW/1

Comments for the above document are required by 31 October, 2006

06/30152343 DC BS IEC 62448 Multimedia E-publishing and E-books. Generic format for E-publishing (TC 100) EPL/100

06/30152485 DC BS IEC 62257-12-1 Recommendations for small renewable energy and hybrid systems for rural electrification. Part 12-1. Selection of integral compact fluorescent lamps for rural electrification systems and recommendations for household lighting equipment GEL/82

Comments for the above document are required by 31 October, 2006

06/30152511 DC BS ISO 13216-1 AMD 2 Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Part 1. Seat bight anchorages and attachments

BS EN 15458 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae STI/28

DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

AUE/7

Comments for the above document are required by 8 September, 2006

BS EN 1983:2006 Industrial valves. Steel ball valves

06/30152349 DC BS IEC 62447-1 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-12. Part 1. VTR specifications (TA6) EPL/100

06/30152524 DC BS IEC 60364-7-702 Low-voltage electrical installations. Part 7-702. Requirements for special installations or locations. Swimming pools and other basins JPEL/64

This standard, which will be available shortly, will implement verbatim EN 1983:2006. Contact: Sarah Horsfield Email: [email protected] PSE/7/5

06/30152554 DC 06/30152354 DC BS IEC 62447-2 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape. Format D-12. Part 2. Compression format (TA6)

National Annex to BS EN 1991-1-4 Eurocode 1. Actions on structures. Part 1-4. General actions. Wind actions B/525/1

BS EN 1993:— Eurocode 3. Design of steel structures

BS EN 1993-1:—

EPL/100

Comments for the above document are required by 15 September, 2006

06/30152359 DC

06/30152560 DC

BS EN 1993-1-3

BS EN 15221-2 Facility management. Part 2. Guidance on how to prepare facility management agreements

BS IEC 60603-7 Connectors for electronic equipment. Part 7. Detail specification for 8-way, unshielded, free and fixed connectors

Supplementary rules for cold-formed members and sheeting

FMW/1

EPL/48

Comments for the above document are required by 31 October, 2006

Comments for the above document are required by 22 September, 2006

Update Standards Aug 2006

Prices may be subject to change.

General rules

BS EN 1993-1-4 Supplementary rules for stainless steels

39

Documents Not Issued as DPCs continued... BS EN 1993-1-5

PD CEN/TR 15350:2006

CEN/TS 15531:—

Plated structural elements

Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery

Public transport. Service interface for real-time information relating to public transport operations

BS EN 1993-1-11 Design of structures with tension components

BS EN 1993-2 Steel bridges The development process for these standards, from the BS EN 1993 series overseen by committee B/525/31, is over and they will be published shortly. Please direct any queries to the Programme Manager (below). Contact: Frank Thomas Email: [email protected] B/525/31

BS EN ISO 10156:— Gas cylinders. Gases and gas mixtures

BS EN ISO 10156-2:2005/AC:2006 Determination of oxidizing ability of toxic and corrosive gases and gas mixtures This standard, which will be available shortly, implements verbatim EN ISO 10156:2005/AC. Contact: Sarah Horsfield Email: [email protected]

This document has recently been approved for publication and will be issued shortly. Any questions on this document can be directed to the Programme Manager (below). Contact: Frank Thomas Email: [email protected] GME/21/6

CEN/TS 15531-1:2006 Context and framework

CEN/TS 15531-2:2006 Communications infrastructure

CEN/TS 15531-3:2006 Functional service interfaces

EN 3299 Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification This draft European standard has now been issued as a Final Draft. To view a copy please contact the Programme Manager (below). Contact: Sue Barden Email: [email protected]

Please direct any comments regarding the preceding European pre-standards, from the CEN/TS 15531 series overseen by committee EPL/278, and which it is intended will be published as Drafts for Development in the UK, to the Programme Manager (below). Contact: Manjit Matharu Email: [email protected] EPL/278

ACE/12

EN ISO 21969

prEN 3375:—

High pressure flexible connections for use with medical gas systems

Aerospace series. Cable, electrical, for digital data transmission

BS EN 13096:2003/AC:2006

prEN 3375-006

Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases

prEN 3375-007

The formal public consultation period for this standard has now passed, however copies of the draft text are available on request from the Programme Manager (below). Contact: Ciaran Molloy Email: [email protected]

Double braid. 77 Ω. Type WW. Product standard

CH/121/6

The preceding draft European standards, from the prEN 3375 series overseen by committee ACE/6/-/2, have now been issued as Final Drafts. To view copies please contact the Programme Manager (below). Contact: Tracey Wilkins Email: [email protected]

ISO/FDIS 247

PVE/3/1

This standard, which will be published shortly, implements verbatim EN 13096:2003/AC:2006. Contact: Sarah Horsfield Email: [email protected] PVE/3/7

BS ISO 1409 Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of surface tension by the ring method

Single braid. 78 Ω. Type XM. Product standard

ACE/6/-/2

prEN 3660:— Copies of this draft British standard are available from the Programme Manager (below). Contact: Charlotte Armstrong Email: [email protected]

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors

PRI/50

Cable outlet, style J, straight, sealed, for heat shrinkable boot. Product standard

prEN 3660-009

This standard, which will be implemented shortly, implements verbatim ISO 21014:2006. Contact: Sarah Horsfield Email: [email protected] PVE/18

Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories

prEN 4008-015 Positioner for crimping tool M22520/2-01. Product standard

Head for crimping tool M22520/4-01. Product standard

your order [email protected]

The preceding draft European standards, from the prEN 3660 & prEN 4008 series overseen by committee ACE/6/-/3, have now been issued as Final Drafts. To view copies please contact the Programme Manager (below). Contact: Tracey Wilkins Email: [email protected] ACE/6/-/3

40

Rubber. Dissolution by acid digestion Copies of the preceding draft International standards, which are overseen by committee PRI/23 and are both currently at final draft stage (FDIS), are available from the contact point (below). Contact: Committee Service Centre Email: [email protected] PRI/23

ISO/IEC FCD 19776:—

prEN 4008:—

prEN 4008-017

e-mail

ISO/FDIS 9028

Information technology

BS ISO 21014:2006 Cryogenic vessels. Cryogenic insulation performance

Rubber. Determination of ash

Prices may be subject to change.

ISO/IEC FCD 19776-3 Extensible 3D (X3D) encodings. Binary encoding This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 24. Copies of the text are available from the Programme Manager (below), to whom comments should be submitted by 30 September, 2006. Contact: Jean Stride Email: [email protected] IST/31

ISO/PAS 27145:— Implementation of WWH-OBD communication requirements

ISO/PAS 27145-1:2006 General information and use case definition

Update Standards Aug 2006

ISO/PAS 27145-2:2006 Common emissions-related data dictionary

ISO/PAS 27145-3:2006 Common message dictionary

ISO/PAS 27145-4:2006 Connection between vehicle and test equipment ISO intend to publish the preceding drafts, overseen by committee AUE/16, as Publicly Available Specifications (PAS), and they will be implemented in the UK as Drafts for Development. Please direct any comments to the Programme Manager (below). Contact: Manjit Matharu Email: [email protected]

CENELEC PUBLICATIONS Provision of EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

Comments can be sent by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

Grills, toasters and similar portable cooking appliances AMENDMENT 2: June 2006

to EN 60335-2-9:2003 CPL/61/07

EN 60335-2-11:— (IEC 60335-2-11:2002/A2:2006) Tumble dryers AMENDMENT 2:June 2006

to EN 60335-2-11:2003 CPL/61/14

EN 50083:—

EN 60335-2-31:— (IEC 60335-2-31:2002/A1:2006)

Cabled distribution systems for television signals and sound signals

AMENDMENT 2: June 2006

AUE/16

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE

EN 60335-2-9:— (IEC 60335-2-9:2002/A2:2006)

Range hoods

to EN 60335-2-31:2003 CPL/61/01

EN 50083-3:— Active wideband equipment for coaxial cable networks CORRIGENDUM 2:April 2006

EN 60335-2-74:— (IEC 60335-2-74:2002/A1:2006)

to EN 50083-3:2002

Portable immersion heaters

EPL/100

AMENDMENT 1: June 2006

to EN 60335-2-74:2003

BS EN 14316:— Thermal insulation products for buildings. Insitu thermal insulation formed from expanded perlite (EP) products

BS EN 14316-2:2006 Specification for the installed products

CPL/61/07

EN 50083-10:— System performance for return paths CORRIGENDUM:April 2006

EN 60335-2-76:— (IEC 60335-2-76:2002/A1:2006)

to EN 50083-10:2002

Electric fence energizers

EPL/100

AMENDMENT 1: June 2006

to EN 60335-2-76:2005

BS EN 14317:— Thermal insulation products for buildings. Insitu thermal insulation formed from exfoliated vermiculite (EV) products

CPL/61/8/1

EN 60335:— Household and similar electrical appliances. Safety

EN 60464:—

EN 60335-2:—

EN 60464-3-2:— (IEC 60464-3-2:2001/A1:2006)

BS EN 14317-2:2006

Varnishes used for electrical insulation

Specification for the installed products The texts of prEN 14316-2 & prEN 14317-2 have been circulated for approval to publish by 1 November, 2006. Copies of the texts are available on request under document references B/502/5.0001/06 & B/502/5.0002/06 respectively from the Programme Manager (below), to whom comments should be submitted by 9 October, 2006. Contact: Ray Kerrigan Email: [email protected] B/502/5

Particular requirements

Specifications for individual materials AMENDMENT 1: June 2006

EN 60335-2-4:— (IEC 60335-2-4:2002/A2:2006) Spin extractors AMENDMENT 2: June 2006

to EN 60335-2-4:2002 CPL/61/14

to EN 60464-3-2:2006 GEL/15/3/7

EN 60556:2006 (IEC 60556:2006) Gyromagnetic materials intended for application at microwave frequencies. Measuring methods for properties EPL/51

Please do not send confirmation of

EN 60335-2-4:— (IEC 60335-2-4:2002/CORR 1:2006)

EN 60601:—

Spin extractors

Medical electrical equipment

CORRIGENDUM 1: June 2006

to EN 60335-2-4:2002

EN 60601-1:—

CPL/61/14

General requirements for safety

orders placed by telephone as it can lead to duplication

Update Standards Aug 2006

EN 60335-2-7:— (IEC 60335-2-7:2002/A2:2006)

EN 60601-1-2:— (IEC 60601-1-2:2001/A1:2004)

Washing machines

Collateral standard. Electromagnetic compatibility. Requirements and tests

AMENDMENT 2: June 2006

AMENDMENT 1: June 2006

to EN 60335-2-7:2003

to EN 60601-1-2:2001

CPL/61/14

CH/62/1

Prices may be subject to change.

41

CENELEC Publications continued... EN 60601-1-8:— (IEC 60601-1-8:2003/A1:2006)

EN 61249-2-10:— (IEC 61249-2-10:2003/CORR1:2005)

EN 62333-2:2006 (IEC 62333-2:2006)

Collateral standard. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

Measuring methods

AMENDMENT 1: June 2006

CORRIGENDUM 1: July 2005

to EN 60601-1-8:2004

to EN 61249-2-10:2003

CH/62/1

EPL/501

CENELEC TECHNICAL SPECIFICATIONS

EN 61347:—

CLC/TS 61496:—

Lamp controlgear

Safety of machinery. Electro-sensitive protective equipment

EN 60838:— Miscellaneous lampholders

EN 60838-2-2:2006 (IEC 60838-2-2:2006)

EN 61347-2-2:— (IEC 61347-2-2:2000/A2:2006)

EPL/51

CLC/TS 61496-2:2006 (IEC 61496-2:2006)

Particular requirements. Connectors for LEDmodules

Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps

CPL/34/2

AMENDMENT 2: June 2006

Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

to EN 61347-2-2:2001

GEL/44

EN 60917:—

CPL/34/3

Modular order for the development of mechanical structures for electronic equipment practices

EN 61400:— Wind turbine generator systems

EN 60917-2-3:2006 (IEC 60917-2-3:2006) Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Extended detail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units

EN 61400-11:— (IEC 61400-11:2002/A1:2006) Acoustic noise measurement techniques AMENDMENT 1: June 2006

to EN 61400-11:2003

EPL/48

PEL/88

EN 60921:— (IEC 60921:2004/A1:2006)

EN 61591:— (IEC 61591:1997/A1:2005)

All ETSI Documents are available from BSI Customer Services. Prices are available on application (see ’How to order’ on page 2). EN (Telecommunications Series)

Ballasts for tubular fluorescent lamps. Performance requirements

Household range hoods. Methods for measuring performance

AMENDMENT 1: June 2006

AMENDMENT 1: June 2006

to EN 60921:2004

to EN 61591:1997

CPL/34/3

CPL/59/9

EN 61249:—

EN 61756:—

Materials for printed boards and other interconnecting structures

ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONS

Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems

The EN publications listed below have been approved and are now endorsed by BSI. Therefore, in addition to being European Standards, they now have the status of National Standards. The date of this issue of Update Standards provides the date of adoption in the UK, where the European Standard number will be recognized as the National Standard number.

EN 300 392:— EN 61249-2:— Reinforced base materials, clad and unclad

EN 61756-1:2006 (IEC 61756-1:2006)

Terrestrial trunked radio (TETRA). Voice plus data (V+D)

General and guidance

EN 61249-2-5:— (IEC 61249-2-5:2003/CORR1:2005) Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad CORRIGENDUM 1: July 2006

to EN 61249-2-5:2003 CORRIGENDUM 1: June 2006 EPL/501

GEL/86/2

EN 300 392-7: June 2006 (Version 2.3.1)

EN 61770:— (IEC 61770:1998/A2:2006) Electric appliances connected to the water mains. Avoidance of back-siphonage and failure of hose-sets AMENDMENT 2: June 2006

Security

EN 300 396:— Terrestrial trunked radio (TETRA). Direct mode operation (DMO)

to EN 61770:1999 CPL/61/14

EN 300 396-6: June 2006 (Version 1.3.1)

EN 61249-2-6:— (IEC 61249-2-6:2003/CORR1:2005) Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

EN 62333:— Noise suppression sheet for digital devices and equipment

CORRIGENDUM 1: July 2005

EN 62333-1:2006 (IEC 62333-1:2006)

to EN 61249-2-6:2003

Definitions and general properties

EPL/501

EPL/51

42

Prices may be subject to change.

Security

EN 300 401: June 2006 (Version 1.4.1) Radio broadcasting systems. Digital audio broadcasting (DAB) to mobile, portable and fixed receivers

Update Standards Aug 2006

EN 301 234: June 2006

ES 282 007: June 2006

TR 100 392:—

(Version 2.1.1)

(Version 1.1.1)

Digital audio broadcasting (DAB). Multimedia object transfer (MOT) protocol

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). IP multimedia subsystem (IMS). Functional architecture

Terrestrial trunked radio (TETRA). Voice plus data (V+D)

EN 302 217:— Fixed radio systems. Characteristics and requirements for point-to-point equipment and antennas

EN 302 217-4-2: June 2006 (Version 1.2.1) Harmonized EN covering essential requirements of article 3.2 of R&TTE directive for antennas

ES 282 010: June 2006

TR 100 392-17-3: June 2006 (Version 1.2.1) TETRA V+D and DMO specifications. Sub-part 3: Release 1.3

(Version 1.1.1)

TR 102 453:—

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Charging [endorsement of 3GPP TS 32.240 v6.3.0, 3GPP TS 32.260 v6.3.0, 3GPP TS 32.297 v6.1.0, 3GPP TS 32.298 v6.1.0 and 3GPP TS 32.299 v6.4.0 modified]

Electromagnetic compatibility and radio spectrum matters (ERM). Converged fixednomadic broadband wireless access (BWA)

ES 283 018: June 2006

TR 102 453-1: June 2006 (Version 1.1.1) Frequencies above 3,4 GHz. System reference document

EN 302 307: June 2006

(Version 1.1.1)

(Version 1.1.2)

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Resource and admission control. H.248 profile for controlling border gateway functions (BGF) in the resource and admission control subsystem (RACS). Protocol specification

TR 126 936: March 2006

Digital video broadcasting (DVB). Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications

EN 383 001: June 2006

ES 283 024: June 2006

TR 126 946: March 2006

(Version 1.1.1)

(Version 1.1.1)

(Version 6.0.1)

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Interworking between session initiation protocol (SIP) and bearer independent call control (BICC) protocol or ISDN user part (ISUP) [ITU-T recommendation Q.1912.5, modified]

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). PSTN/ISDN emulation. H.248 profile for controlling trunking media gateways in the PSTN/ISDN emulation subsystem (PES). Protocol specification

Universal mobile telecommunications system (UMTS). Multimedia broadcast/multicast service (MBMS) user service guidelines (3GPP TR 26.946 version 6.0.1 release 6)

(Version 1.1.1)

All ETSI Documents are available from BSI Customer Services. Prices are available on application (see ’How to order’ on page 2). ETSI also publishes the following EG ES SR TS TR

ETSI Guides ETSI Standards Special Reports Technical Specifications Technical Reports

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Resource and admission control. Protocol for QoS reservation information exchange between the service policy decision function (SPDF) and the access-resource and admission control function (A-RACF) in the resource and protocol specification

ES 283 031: June 2006 (Version 1.1.1) Telecommunications and internet converged services and protocols for advanced networking (TISPAN). IP multimedia. H.248 Profile for controlling multimedia resource function processors (MRFP) in the IP multimedia system (IMS). Protocol specification

EG 201 730:—

(Version 1.1.1)

Terminals’ access to public telecommunications networks. Application of the directive 1999/5/EC (R&TTE), article 4.2. Guidelines for the publication of interface specifications

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Network attachment sub-system (NASS). e4 interface based on the DIAMETER protocol

(Version 2.1.1) Analogue narrow-band wireline interfaces

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Resource and admission control subsystem (RACS). Functional architecture

Update Standards Aug 2006

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Bearer control. Stage 2 requirements

TS 101 331: June 2006 (Version 1.2.1) Lawful interception (LI). Requirements of law enforcement agencies

Broadband radio access networks (BRAN). HIPERACCESS. Conformance testing for the data link control (DLC) layer

TS 102 149-1: June 2006 (Version 1.3.1) Protocol implementation conformance statement (PICS) proforma

TS 102 149-2: June 2006 (Version 1.3.1) Test suite structure and test purposes (TSS&TP) specification

TS 102 149-3: June 2006 (Version 1.3.1) Abstract test suite (ATS)

ES 283 039:— Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Specification of protocols required to support the NGN overload control architecture

TS 102 362:—

ES 283 039-3: June 2006

TS 102 362-1: June 2006

(Version 1.1.1)

(Version 1.2.1)

Overload and congestion control for H.248 MG/MGC

Protocol implementation conformance statement (PICS) proforma

ES 282 003: June 2006 (Version 1.1.1)

TR 182 013: June 2006

TS 102 149:—

ES 283 034: June 2006

EG 201 730-2: June 2006

Universal mobile telecommunications system (UMTS). Performance characterization of 3GPP audio codecs (3GPP TR 26.936 version 6.1.0 release 6)

(Version 1.1.1)

ES 283 026: June 2006

OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

(Version 6.1.0)

Prices may be subject to change.

Electromagnetic compatibility and radio spectrum matters (ERM). Conformance testing for the digital mobile radio (DMR)

43

Other ETSI Publications continued... TS 102 362-2: June 2006

TS 123 236: March 2006

TS 124 234: March 2006

(Version 1.2.1)

(Version 6.3.0)

(Version 7.1.0)

Test suite structure and test purposes (TSS&TP) specification

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Intradomain connection of radio access network (RAN) nodes to multiple core network (CN) nodes (3GPP TS 23.236 version 6.3.0 release 6)

Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. WLAN user equipment (WLAN UE) to network protocols. Stage 3 (3GPP TS 24.234 version 7.1.0 release 7)

TS 102 362-3: June 2006 (Version 1.2.1) Abstract test suite (ATS)

TS 102 385:— Broadband radio access networks (BRAN). HiperMAN/WiMAX. Conformance testing for the data link control layer (DLC)

TS 102 385-1: June 2006 (Version 2.2.1)

TS 124 247: March 2006 TS 123 278: March 2006

(Version 6.5.0)

(Version 7.1.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Messaging using the IP multimedia (IM) core network (CN) subsystem. Stage 3 (3GPP TS 24.247 version 6.5.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Customised applications for mobile network enhanced logic (CAMEL) phase 4. Stage 2. IM CN interworking (3GPP TS 23.278 version 7.1.0 release 7)

Protocol implementation conformance statement (PICS) proforma

TS 125 101: March 2006 TS 124 008: March 2006

(Version 5.18.0)

TS 102 385-2: June 2006

(Version 6.12.0)

(Version 2.2.1)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Mobile radio interface layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 6.12.0 release 6)

Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 5.18.0 release 5)

Test suite structure and test purposes (TSS&TP) specification

TS 102 385-3: June 2006 (Version 2.2.1) Abstract test suite (ATS)

TS 124 008: March 2006 (Version 7.3.0)

TS 102 472: June 2006 (Version 1.1.1) Digital video broadcasting (DVB). IP datacast over DVB-H. Content delivery protocols

TS 123 140: March 2006 (Version 6.12.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Multimedia messaging service (MMS). Functional description. Stage 2 (3GPP TS 23.140 version 6.12.0 release 6)

TS 123 172: March 2006

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Mobile radio interface layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 7.3.0 release 7)

TS 124 080: March 2006 (Version 7.1.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Mobile radio layer 3 supplementary service specification. Formats and coding (3GPP TS 24.080 version 7.1.0 release 7)

(Version 6.4.0) Universal mobile telecommunications system (UMTS). Technical realization of circuit switched (CS) multimedia service. UDI/RDI fallback and service modification. Stage 2 (3GPP TS 23.172 version 6.4.0 release 6)

TS 123 205: March 2006 (Version 5.11.0) Universal mobile telecommunications system (UMTS). Bearer-independent circuit-switched core network. Stage 2 (3GPP TS 23.205 version 5.11.0 release 5)

TS 124 229: March 2006 (Version 6.10.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Internet protocol (IP) multimedia call control protocol based on session initiation protocol (SIP) and session description protocol (SDP). Stage 3 (3GPP TS 24.229 version 6.10.0 release 6)

TS 124 229: March 2006 (Version 7.3.0)

Universal mobile telecommunications system (UMTS). Bearer-independent circuit-switched core network. Stage 2 (3GPP TS 23.205 version 6.5.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Internet protocol (IP) multimedia call control protocol based on session initiation protocol (SIP) and session description protocol (SDP). Stage 3 (3GPP TS 24.229 version 7.3.0 release 7)

TS 123 228: March 2006

TS 124 234: March 2006

(Version 7.3.0)

(Version 6.6.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia subsystem (IMS). Stage 2 (3GPP TS 23.228 version 7.3.0 release 7)

Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. User equipment (UE) to network protocols. Stage 3 (3GPP TS 24.234 version 6.6.0 release 6)

TS 123 205: March 2006 (Version 6.5.0)

44

Prices may be subject to change.

TS 125 101: March 2006 (Version 6.11.0) Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 6.11.0 release 6)

TS 125 101: March 2006 (Version 7.3.0) Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 7.3.0 release 7)

TS 125 102: March 2006 (Version 6.3.0) Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 6.3.0 release 6)

TS 125 102: March 2006 (Version 7.2.0) Universal mobile telecommunications system (UMTS). User equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 7.2.0 release 7)

TS 125 104: March 2006 (Version 6.12.0) Universal mobile telecommunications system (UMTS). Base station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 6.12.0 release 6)

TS 125 104: March 2006 (Version 7.3.0) Universal mobile telecommunications system (UMTS). Base station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 7.3.0 release 7)

TS 125 106: March 2006 (Version 5.10.0) Universal mobile telecommunications system (UMTS). UTRA repeater radio transmission and reception (3GPP TS 25.106 version 5.10.0 release 5)

Update Standards Aug 2006

Other ETSI Publications continued... TS 125 106: March 2006

TS 125 133: March 2006

TS 125 423: March 2006

(Version 6.4.0)

(Version 7.3.0)

(Version 7.0.0)

Universal mobile telecommunications system (UMTS). UTRA repeater radio transmission and reception (3GPP TS 25.106 version 6.4.0 release 6)

Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 7.3.0 release 7)

Universal mobile telecommunications system (UMTS). UTRAN Iur interface radio network subsystem application part (RNSAP) signalling (3GPP TS 25.423 version 7.0.0 release 7)

TS 125 106: March 2006

TS 125 141: March 2006

TS 125 433: March 2006

(Version 7.0.0)

(Version 6.13.0)

(Version 7.0.0)

Universal mobile telecommunications system (UMTS). UTRA repeater radio transmission and reception (3GPP TS 25.106 version 7.0.0 release 7)

Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 6.13.0 release 6)

Universal mobile telecommunications system (UMTS). UTRAN Iub interface node B application part (NBAP) signalling (3GPP TS 25.433 version 7.0.0 release 7)

TS 125 141: March 2006 TS 125 113: March 2006

(Version 7.3.0)

(Version 6.4.0)

Universal mobile telecommunications system (UMTS). Base station (BS) conformance testing (FDD) (3GPP TS 25.141 version 7.3.0 release 7)

Universal mobile telecommunications system (UMTS). Base station and repeater electromagnetic compatibility (EMC) (3GPP TS 25.113 version 6.4.0 release 6)

TS 125 143: March 2006

TS 126 103: March 2006 (Version 6.2.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Speech codec list for GSM and UMTS (3GPP TS 26.103 version 6.2.0 release 6)

(Version 5.10.0)

TS 125 113: March 2006 (Version 7.3.0) Universal mobile telecommunications system (UMTS). Base station and repeater electromagnetic compatibility (EMC) (3GPP TS 25.113 version 7.3.0 release 7)

Universal mobile telecommunications system (UMTS). UTRA repeater conformance testing (3GPP TS 25.143 version 5.10.0 release 5)

TS 125 143: March 2006 (Version 6.4.0)

TS 125 123: March 2006 (Version 4.14.0) Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (TDD) (3GPP TS 25.123 version 4.14.0 release 4)

TS 125 123: March 2006

Universal mobile telecommunications system (UMTS). UTRA repeater conformance testing (3GPP TS 25.143 version 6.4.0 release 6)

TS 125 123: March 2006 (Version 6.6.0) Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (TDD) (3GPP TS 25.123 version 6.6.0 release 6)

TS 125 123: March 2006 (Version 7.0.0) Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (TDD) (3GPP TS 25.123 version 7.0.0 release 7)

TS 125 133: March 2006 (Version 4.17.0) Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 4.17.0 release 4)

(Version 7.0.0) Universal mobile telecommunications system (UMTS). UTRA repeater conformance testing (3GPP TS 25.143 version 7.0.0 release 7)

TS 125 171: March 2006 (Version 7.0.0) Universal mobile telecommunications system (UMTS). Requirements for support of assisted global positioning system (A-GPS). Frequency division duplex (FDD) (3GPP TS 25.171 version 7.0.0 release 7)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Multimedia messaging service (MMS). Media formats and codes (3GPP TS 26.140 version 6.3.0 release 6)

TS 126 141: March 2006 Universal mobile telecommunications system (UMTS). IP multimedia system (IMS) messaging and presence. Media formats and codecs (3GPP TS 26.141 version 6.3.0 release 6)

TS 126 234: March 2006 (Version 6.7.0) Universal mobile telecommunications system (UMTS). Transparent end-to-end packetswitched streaming service (PSS). Protocols and codecs (3GPP TS 26.234 version 6.7.0 release 6)

TS 126 273: March 2006 TS 125 306: March 2006

(Version 6.4.0)

(Version 6.8.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). ANSI-C code for the fixed-point extended adaptive multi-rate – wideband (AMR-WB+) speech codec (3GPP TS 26.273 version 6.4.0 release 6)

Universal mobile telecommunications system (UMTS). UE radio access capabilities definition (3GPP TS 25.306 version 6.8.0 release 6)

TS 125 306: March 2006 (Version 7.0.0) Universal mobile telecommunications system (UMTS). UE radio access capabilities definition (3GPP TS 25.306 version 7.0.0 release 7)

TS 125 321: March 2006 (Version 6.8.0) Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 6.8.0 release 6)

TS 125 133: March 2006

TS 125 321: March 2006

(Version 6.13.0)

(Version 7.0.0)

Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 6.13.0 release 6)

Universal mobile telecommunications system (UMTS). Medium access control (MAC) protocol specification (3GPP TS 25.321 version 7.0.0 release 7)

46

(Version 6.3.0)

(Version 6.3.0)

TS 125 143: March 2006

(Version 5.11.0) Universal mobile telecommunications system (UMTS). Requirements for support of radio resource management (TDD) (3GPP TS 25.123 version 5.11.0 release 5)

TS 126 140: March 2006

Prices may be subject to change.

TS 126 274: March 2006 (Version 6.3.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Speech codec speech processing functions. Extended adaptive multi-rate – wideband (AMR-WB+) speech codec. Conformance testing (3GPP TS 26.274 version 6.3.0 release 6)

TS 126 304: March 2006 (Version 6.5.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Extended adaptive multi-rate – wideband (AMR-WB+) codec. Floating-point ANSI-C code (3GPP TS 26.304 version 6.5.0 release 6)

Update Standards Aug 2006

TS 126 346: March 2006

TS 129 162: March 2006

TS 129 229: March 2006

(Version 6.4.0)

(Version 7.1.0)

(Version 7.1.0)

Universal mobile telecommunications system (UMTS). Multimedia broadcast/multicast service (MBMS). Protocols and codecs (3GPP TS 26.346 version 6.4.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Interworking between the IM CN subsystem and IP networks (3GPP TS 29.162 version 7.1.0 release 7)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Cx and Dx interfaces based on the diameter protocol. Protocol details (3GPP TS 29.229 version 7.1.0 release 7)

TS 129 163: March 2006

TS 129 230: March 2006

(Version 6.8.0)

(Version 6.7.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Interworking between the IP multimedia (IM) core network (CN) subsystem and circuit switched (CS) networks (3GPP TS 29.163 version 6.8.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Diameter applications. 3GPP specific codes and identifiers (3GPP TS 29.230 version 6.7.0 release 6)

TS 126 406: March 2006 (Version 6.2.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General audio codec audio processing functions. Enhanced aacPlus general audio codec. Conformance testing (3GPP TS 26.406 version 6.2.0 release 6)

TS 126 410: March 2006

TS 129 232: March 2006

(Version 6.6.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General audio codec audio processing functions. Enhanced aacPlus general audio codec. Floating-point ANSI-C code (3GPP TS 26.410 version 6.6.0 release 6)

TS 129 002: March 2006

TS 129 163: March 2006 (Version 7.2.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Interworking between the IP multimedia (IM) core network (CN) subsystem and circuit switched (CS) networks (3GPP TS 29.163 version 7.2.0 release 7)

(Version 6.13.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Mobile application part (MAP) specification (3GPP TS 29.002 version 6.13.0 release 6)

TS 129 010: March 2006

TS 129 208: March 2006 (Version 6.6.1) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). End-toend quality of service (QoS) signalling flows (3GPP TS 29.208 version 6.6.1 release 6)

(Version 6.8.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Information element mapping between mobile station – base station system (MS – BSS) and base station system – mobile-services switching centre (BSS – MSC). Signalling procedures and the mobile application

TS 129 210: March 2006

(Version 6.4.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). Serving GPRS support node (SGSN) – visitors location register (VLR). Gs interface layer 3 specification (3GPP TS 29.018 version 6.4.0 release 6)

Universal mobile telecommunications system (UMTS). Media gateway controller (MGC) – media gateway (MGW) interface. Stage 3 (3GPP TS 29.232 version 5.14.0 release 5)

TS 129 232: March 2006 (Version 6.5.0) Universal mobile telecommunications system (UMTS). Media gateway controller (MGC) – media gateway (MGW) interface. Stage 3 (3GPP TS 29.232 version 6.5.0 release 6)

TS 129 234: March 2006 (Version 6.6.0) Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. Stage 3 (3GPP TS 29.234 version 6.6.0 release 6)

(Version 6.5.0) Universal mobile telecommunications system (UMTS). Charging rule provisioning over Gx interface (3GPP TS 29.210 version 6.5.0 release 6)

TS 129 228: March 2006 TS 129 018: March 2006

(Version 5.14.0)

TS 129 234: March 2006 (Version 7.1.0) Universal mobile telecommunications system (UMTS). 3GPP system to wireless local area network (WLAN) interworking. Stage 3 (3GPP TS 29.234 version 7.1.0 release 7)

(Version 5.15.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia (IM) subsystem Cx and Dx interfaces. Signalling flows and message contents (3GPP TS 29.228 version 5.15.0 release 5)

TS 129 328: March 2006 (Version 5.13.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia subsystem (IMS) Sh interface. Signalling flows and message contents (3GPP TS 29.328 version 5.13.0 release 5)

TS 129 228: March 2006 TS 129 060: March 2006 (Version 6.12.0)

(Version 6.10.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). General packet radio service (GPRS). GPRS tunnelling protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 6.12.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia (IM) subsystem Cx and Dx interfaces. Signalling flows and message contents (3GPP TS 29.228 version 6.10.0 release 6)

TS 129 109: March 2006

TS 129 228: March 2006

(Version 6.6.0)

(Version 7.1.0)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Generic authentication architecture (GAA). Zh and Zn interfaces based on the diameter protocol. Stage 3 (3GPP TS 29.109 version 6.6.0 release 6)

Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia (IM) subsystem Cx and Dx interfaces. Signalling flows and message contents (3GPP TS 29.228 version 7.1.0 release 7)

Update Standards Aug 2006

Prices may be subject to change.

TS 129 328: March 2006 (Version 6.9.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). IP multimedia subsystem (IMS) Sh interface. Signalling flows and message contents (3GPP TS 29.328 version 6.9.0 release 6)

TS 129 332: March 2006 (Version 6.5.0) Universal mobile telecommunications system (UMTS). Media gateway control function (MGCF) – IM media gateway (IM-MGW) Mn interface (3GPP TS 29.332 version 6.5.0 release 6)

47

Other ETSI Publications continued... TS 131 102: March 2006

TS 134 122: March 2006

(Version 6.13.0)

(Version 5.3.0)

Universal mobile telecommunications system (UMTS). Characteristics of the universal subscriber identity module (USIM) application (3GPP TS 31.102 version 6.13.0 release 6)

Universal mobile telecommunications system (UMTS). Terminal conformance specification, Radio transmission and reception (TDD) (3GPP TS 34.122 version 5.3.0 release 5)

TCT/ERM/TF

TS 134 123:—

Harmonized EN for IMT-2000, CDMA direct spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE directive

TS 131 102: April 2006 (Version 7.4.1) Universal mobile telecommunications system (UMTS). Characteristics of the universal subscriber identity module (USIM) application (3GPP TS 31.102 version 7.4.1 release 7)

TS 131 111: March 2006 (Version 6.8.0) Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Universal subscriber identity module (USIM) application toolkit (USAT) (3GPP TS 31.111 version 6.8.0 release 6)

Universal mobile telecommunications system (UMTS). User equipment (UE) conformance specification

TS 134 123-1: March 2006 (Version 6.2.1) Protocol conformance specification (3GPP TS 34.123-1 version 6.2.1 release 6)

EN 301 908-3: June 2006 (Version 3.2.1)

Universal mobile telecommunications system (UMTS). Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (3GPP TS 34.124 version 6.2.0 release 6)

(Version 6.2.0) Universal mobile telecommunications system (UMTS). Common test environments for user equipment (UE). Conformance testing (3GPP TS 34.108 version 6.2.0 release 6)

Harmonized EN for IMT-2000, CDMA direct spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE directive

Note: Please order by quoting the reference 06/635064 DC (ETSI) £20.00 Contact: Dominic Hayes Email: [email protected] TCT/ERM/TF

TS 134 124: March 2006 (Version 7.3.0)

TS 134 108: March 2006

£20.00 Contact: Dominic Hayes Email: [email protected]

Implementation conformance statement (ICS) specification (3GPP TS 34.123-2 version 6.2.0 release 6)

(Version 7.3.0)

Universal mobile telecommunications system (UMTS). Mobile equipment (ME) conformance test specification. Universal subscriber interface module application toolkit (USAT) conformance test specification (3GPP TS 31.124 version 6.4.0 release 6)

Note: Please order by quoting the reference 06/635063 DC (ETSI)

(Version 6.2.0)

(Version 6.2.0)

(Version 6.4.0)

(Version 3.2.1)

TCT/ERM/TF

TS 134 124: March 2006

TS 131 124: March 2006

EN 301 908-2: June 2006

TS 134 123-2: March 2006

TS 131 111: March 2006 Digital cellular telecommunications system (phase 2+). Universal mobile telecommunications system (UMTS). Universal subscriber identity module (USIM) application toolkit (USAT) (3GPP TS 31.111 version 7.3.0 release 7)

Contact: Dominic Hayes Email: [email protected]

Universal mobile telecommunications system (UMTS). Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment (3GPP TS 34.124 version 7.3.0 release 7)

TS 134 171: March 2006 (Version 6.3.0) Universal mobile telecommunications system (UMTS). Terminal conformance specification. Assisted global positioning system (A-GPS). Frequency division duplex (FDD) (3GPP TS 34.171 version 6.3.0 release 6)

EN 301 908-7: June 2006 (Version 3.0.0) Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE directive

Note: Please order by quoting the reference 06/635065 DC (ETSI) £20.00 Contact: Dominic Hayes Email: [email protected] TCT/ERM/TF

EN 301 908-11: June 2006 (Version 3.2.1)

DRAFT ETSI STANDARDS FOR PUBLIC COMMENT

Harmonized EN for IMT-2000, CDMA direct spread (UTRA FDD) (repeaters) covering essential requirements of article 3.2 of the R&TTE directive

(Version 6.4.0)

EN 301 908:—

Note: Please order by quoting the reference 06/635066 DC (ETSI)

Universal mobile telecommunications system (UMTS). Terminal conformance specification, Radio transmission and reception (FDD) (3GPP TS 34.121 version 6.4.0 release 6)

Electromagnetic compatibility and radio spectrum matters (ERM). Base stations (BS), repeaters and user equipment (UE) for IMT-2000 third-generation cellular networks

£20.00 Contact: Dominic Hayes Email: [email protected]

TS 134 121: March 2006

TCT/ERM/TF

TS 134 121:— Universal mobile telecommunications system (UMTS). User equipment (UE) conformance specification. Radio transmission and reception (FDD)

TS 134 121-1: March 2006 (Version 7.0.0) Conformance specification (3GPP TS 34.121-1 version 7.0.0 release 7)

TS 134 121-2: March 2006 (Version 7.0.0) Implementation conformance statement (ICS) (3GPP TS 34.121-2 version 7.0.0 release 7)

48

The following ETSI documents are issued under the Public Enquiry PE20061020. Comments are welcome and should be addressed to the named contact to arrive by 15 September 2006. EN 301 908-1: June 2006 (Version 3.2.1) Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE directive

Note: Please order by quoting the reference 06/635062 DC (ETSI)

Please do not send confirmation of orders placed by telephone as it can lead to duplication

£20.00

Prices may be subject to change.

Update Standards Aug 2006

IEC Publications

IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)

IEC 60819:—

IEC 61347:—

Non-cellutosic papers for electrical purposes

Safety specification for lamp controlgear

IEC 60819-3-3:2006

IEC 61347-2-2:—

(Edition 2)

Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps

Specifications for individual materials £20.80 members, £21.67 non-members GEL/15/3/10

AMENDMENT 2: May 2006

to IEC 61347-2-2:2000 £14.40 members, £15.00 non-members

IEC 60870:— IEC 60127:—

Telecontrol equipment and systems

CPL/34/3

Miniature fuses

IEC 60870-5-104:2006 IEC 60127-1:2006 (Edition 2) Definitions for miniature fuses and general requirements for miniature fuse-links £84.80 members, £88.33 non-members

(Edition 2) Transmission protocols. Network access for IEC 60870-5-101 using standard transport profiles £155.20 members, £161.67 non-members PEL/57

IEC 60335:—

IEC 60921:—

Household and similar electrical appliances. Safety

Ballasts for tubular fluorescent lamps. Performance requirements AMENDMENT 1: May 2006

IEC 60335-2-103:2006

to IEC 60921:2004

(Edition 2)

£14.40 members, £15.00 non-members

Particular requirements for drives for gates, doors and windows £84.80 members, £88.33 non-members

CPL/34/3

IEC 60371:— Specification for insulating materials based on mica

IEC 60939:— Passive filter units for electromagnetic interference suppression

(Edition 3)

IEC 60439:—

Sectional specification. Passive filter units for which safety tests are appropriate. Test methods and general requirements CORRIGENDUM 1: November 2005 EPL/40X

Particular requirements for assemblies for power distribution in public networks £84.80 members, £88.33 non-members

IEC 61326:—

IEC 60534-4:2006 (Edition 3) Inspection and routine testing £68.80 members, £71.67 non-members GEL/65/2

IEC 60598:— Luminaires

Electrical equipment for measurement, control and laboratory use. EMC requirements

IEC 61326-2:— Particular requirements

IEC 61326-2-4:2006 Test configurations, operational conditions and performance criteria for insulation monitoring devices, according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 £38.40 members, £40.00 non-members

High-voltage switchgear and controlgear

IEC 62271-202:2006 High voltage/low voltage prefabricated substation £155.20 members, £161.67 non-members PEL/17/1

IEC 81714:— Design of graphical symbols for use in the technical documentation of products

IEC 81714-2:2006 (Edition 2) Specification for graphical symbols in a computer sensible form including graphical symbols for a reference library, and requirements for their interchange £168.00 members, £175.00 non-members GEL/3

e-mail IEC 61326-2-5:2006

Particular requirements ground recessed luminaires £38.40 members, £40.00 non-members CPL/34/4

GEL/65/1

50

IEC 62271:—

GEL/65/1

Test configurations, operational conditions and performance criteria for field devices with interfaces according to communication profile family 3 profile 3/2 £32.00 members, £33.33 non-members

IEC 60598-2-13:2006

PEL/78

to IEC 60939-2:2005

(Edition 2)

Industrial process control valves

to IEC 61481:2001

PEL/17/1

IEC 60939-2:—

IEC 60534:—

CORRIGENDUM 2: July 2005

to IEC 60939-1:2005

GEL/15/3/11

PEL/17/3

Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV A.C.

CORRIGENDUM 1: November 2005 EPL/40X

IEC 60439-5:2006

IEC 61481:—

High voltage switchgear and assemblies with digital interfaces based on IEC 61850 £116.80 members, £121.67 non-members

Specifications for individual materials £38.40 members, £40.00 non-members

Low-voltage switchgear and controlgear assemblies

CPL/34/3

IEC 62271-3:2006 IEC 60939-1:— Generic specification

IEC 60371-3-1:2006

Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps £92.80 members, £96.67 non-members Consolidated edition

PEL/32

CPL/61/01

IEC 61347-2-2:2000

Prices may be subject to change.

your order [email protected]

Update Standards Aug 2006

ISO Publications

ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

ISO/IEC 8825:— Information technology. ASN.1 encoding rules

ISO/IEC 8825-3:— Specification of encoding control notation (ECN) CORRIGENDUM 1: June 2006

to ISO/IEC 8825-3:2002 IST/6

Will not be implemented as a British Standard

ISO/IEC 10373:— Identification cards. Test methods

ISO/IEC 10373-6:— Proximity cards AMENDMENT 4: June 2006

to ISO/IEC 10373-6:2001 £12.80 members, £13.33 non-members IST/17

Will be implemented as an identical British Standard

ISO 10426:— Petroleum and natural gas industries. Cements and materials for well cementing

ISO 10426-2:—

continued from page 5

Materials and chemicals BS 3680...............................................................30 BS 4747...............................................................23 BS 6782.........................................................29, 30 BS 7044.........................................................11, 12 BS 7337...............................................................29 BS EN ISO 178 .....................................................22 BS EN ISO 183 .....................................................29 BS EN 301 .............................................................6 BS EN 643 ...........................................................23 BS EN 646 .............................................................6 BS EN ISO 801 .....................................................23 BS EN ISO 2758 ...................................................23 BS EN ISO 2759 ...................................................24 BS EN ISO 3543 ...................................................20 BS EN ISO 4892 ...................................................10 BS EN ISO 5912 .............................................16, 21 BS EN ISO 6427 ...................................................30 BS EN ISO 9020 .............................................29, 30 BS EN ISO 11402 ...........................................20, 30 BS EN 13165 .......................................................20 BS EN 14257 .......................................................11 BS EN 14480 .......................................................20 BS EN 14598 .......................................................20 BS EN 14668 .......................................................20 BS EN 14808 .......................................................11 BS EN 14809 .......................................................12 BS EN 14810 .......................................................12 BS EN 14836 .......................................................12 BS EN 14837 .......................................................12 BS EN 14877 .......................................................12 BS EN 14904 .......................................................12 BS EN 14976 .................................................20, 29 BS EN ISO 18472 .................................................14 BS ISO 1409 ........................................................40 BS ISO 2846 ........................................................17 BS ISO 5912 ..................................................16, 21 BS ISO TR 8363....................................................31 BS ISO 9123 ........................................................31 BS ISO 9128 ..................................................17, 30 BS ISO 11084 ......................................................17 BS ISO 12647 ......................................................17 BS ISO 12649 ......................................................17 BS ISO 14531 ......................................................17 BS ISO 15076 ......................................................17 BS ISO 15994 ......................................................18 BS ISO 16564 ......................................................23 BS ISO 17500 ......................................................18 DD CEN/TS 14758 ...............................................11 DD CEN/TS 15359 ...............................................12 DD CEN/TS 15398 ...............................................12 BS AU 229.....................................................17, 30

Testing of well cements CORRIGENDUM 1: June 2006

to ISO 10426-2:2003 PSE/17/-/3

Will be implemented as an identical British Standard

ISO/IEC 13235:— Information technology. Open distributed processing. Trading function

ISO/IEC 13235-3:— Provision of trading function using OSI directory service CORRIGENDUM 1: June 2006

to ISO/IEC 13235-3:1998 IST/15

Will be implemented as an identical British Standard

52

Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

11...................................................................27 159.................................................................25 598.................................................................22 1197...............................................................29 1376...............................................................25 2049...............................................................23 2858...............................................................27 3273...............................................................27 3300...............................................................23 3680...............................................................30 4263...............................................................27 4285...............................................................29 4533...............................................................19 4540...............................................................30 4584 ............................................27, 28, 29, 30 4585.........................................................30, 31 4730...............................................................27 4737...............................................................29 4747...............................................................23

Prices may be subject to change.

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

4783...............................................................27 4808...............................................................27 4871...............................................................25 4872...............................................................25 4895...............................................................25 5225...............................................................25 5268.................................................................6 5400...............................................................19 5425...............................................................29 5649...............................................................29 5665...............................................................19 5691.........................................................14, 29 6001...............................................................19 6069...............................................................23 6493...............................................................18 6626...............................................................25 6782.........................................................29, 30 6867...............................................................25 6878...............................................................25 6904...............................................................25 6911...............................................................22 7009...............................................................27 7020.........................................................17, 29 7044.........................................................11, 12 7328...............................................................27 7337...............................................................29 7407...............................................................27 7706...............................................................23 7896...............................................................23 7915...............................................................25 7963...............................................................25 8110...............................................................25 8434...............................................................14 9612 N007 .....................................................27 9620...............................................................26 9751 N0001 ...................................................25 EN 40 .............................................................29 EN 54 ...................................................6, 19, 22 EN 71 .............................................................19 EN ISO 178 .....................................................22 EN ISO 183 .....................................................29 EN 203 .............................................................6 EN 250 ...........................................................19 EN 287 ...........................................................19 EN 301 .............................................................6 EN 416 .......................................................6, 30 EN 419 .......................................................6, 30 EN 534 .............................................................6 EN 615 ...........................................................19 EN 643 ...........................................................23 EN 646 .............................................................6 EN 760 ...........................................................25 EN ISO 801 .....................................................23 EN 934 ...........................................................19 EN 960 .............................................................6 EN 1043 .........................................................25 EN 1143 .........................................................25 EN 1149 ...........................................................6 EN 1183 .........................................................25 EN 1184 .........................................................25 EN 1217 .........................................................25 EN 1299 .........................................................31 EN 1320 .........................................................25 EN 1321 .........................................................25 EN 1366 ...........................................................6 EN 1388 .........................................................25 EN 1442 ...........................................................6 EN 1454 ...................................................14, 29 EN 1457 .........................................................19 EN 1541 .........................................................23 EN 1983 .........................................................39 EN 1993 ...................................................39, 40 EN ISO 2151 ...................................................19 EN 2235 ...........................................................6 EN 2435 .......................................................6, 8 EN 2436 ...........................................................8

Update Standards Aug 2006

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN

2647 ...........................................................8 ISO 2739 ...................................................23 ISO 2758 ...................................................23 ISO 2759 ...................................................24 2856 ...........................................................8 ISO 3325 ...................................................24 3425 ...........................................................8 3426 ...........................................................8 3427 ...........................................................8 ISO 3543 ...................................................20 3727 ...........................................................8 ISO 3745 ...................................................20 3745 ...........................................................8 4041 ...........................................................8 4198 ...........................................................8 4311 .........................................................10 4312 .........................................................10 4424 .........................................................10 4425 .........................................................10 4494 .........................................................10 4495 .........................................................10 4501 .........................................................10 4509 .........................................................10 4617 .........................................................10 ISO 4892 ...................................................10 ISO 5349 ...................................................31 ISO 5828 ...................................................31 ISO 5912 .............................................16, 21 ISO 6427 ...................................................30 ISO 6847 ...................................................25 ISO 7284 ...................................................31 ISO 8261 .............................................20, 29 ISO 8662 ...................................................31 ISO 8665 ...................................................10 ISO 9020 .............................................29, 30 9104 .........................................................10 9132 .........................................................10 ISO 9606 .............................................25, 26 ISO 9692 ...................................................26 ISO 10075 .................................................26 10126 .................................................10, 30 10143 .......................................................10 ISO 10156 .................................................40 10165 .................................................10, 30 10341 .................................................10, 30 ISO 10819 .................................................31 ISO 10942 .................................................10 ISO 10943 .................................................10 ISO 11145 .................................................10 ISO 11205 .................................................20 ISO 11402 ...........................................20, 30 ISO 11979 ...........................................10, 30 12079 .......................................................10 12094 .......................................................11 12259 .................................................20, 22 12480 .......................................................22 12535 .................................................14, 30 12710 .......................................................11 12786 .......................................................31 12875 .......................................................26 13084 .......................................................20 ISO 13090 .................................................31 13096 .......................................................40 13133 .......................................................26 13134 .......................................................26 13161 .......................................................20 13165 .......................................................20 13490 .......................................................31 13503 .................................................10, 30 13592 .......................................................20 13617 .......................................................20 ISO 13628 .................................................26 13676 .......................................................24 ISO 13702 .................................................26 ISO 13703 .................................................26 13715 .......................................................20

Update Standards Aug 2006

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN

ISO 13753 .................................................31 13848 .......................................................11 ISO 13919 .................................................26 ISO 13920 .................................................26 13952 .......................................................22 14034 .......................................................11 14227 .......................................................11 14246 .......................................................11 14257 .......................................................11 ISO 14270 .................................................26 ISO 14271 .................................................26 ISO 14272 .................................................26 ISO 14273 .................................................26 14316 .......................................................41 14317 .......................................................41 ISO 14372 .................................................26 14383 .......................................................11 14480 .......................................................20 14491 .......................................................11 ISO 14505 .................................................11 ISO 14554 .................................................26 14598 .......................................................20 14668 .......................................................20 14750 .......................................................11 14764 .......................................................20 14808 .......................................................11 14809 .......................................................12 14810 .......................................................12 14836 .......................................................12 14837 .......................................................12 14877 .......................................................12 ISO 14880 ...........................................12, 20 14901 .......................................................12 14904 .......................................................12 14976 .................................................20, 29 14996 .......................................................12 ISO 15004 .................................................12 ISO 15136 .................................................12 ISO 15438 .................................................17 ISO 17375 .................................................12 ISO 18276 ...........................................14, 30 ISO 18472 .................................................14 ISO 19432 ...........................................14, 29 21089 .......................................................31 ISO 21171 .................................................14 ISO 21649 .................................................14 24003 .......................................................24 27286 .......................................................26 30326 .......................................................31 50083 .................................................16, 20 50117 .................................................20, 29 50125 .......................................................31 50149 .......................................................21 50200 .......................................................14 50342 .......................................................22 50366 .......................................................22 60076 .......................................................14 60079 .......................................................21 60204 .......................................................14 60216 .................................................14, 29 60249 ...............................15, 27, 28, 29, 30 60282 .......................................................14 60317 .......................................................22 60335 .....................................14, 21, 22, 30 60384 .................................................14, 30 60432 .......................................................21 60439 .......................................................21 60464 .......................................................22 60598 .................................................15, 21 60601 .......................................................21 60603 .......................................................22 60704 .......................................................15 60728 .................................................16, 20 60730 .......................................................23 60745 .......................................................21 60770 .......................................................15

Prices may be subject to change.

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN 60794 .......................................................15 EN 60950 .................................................15, 21 EN 61011 .......................................................30 EN 61212 .......................................................15 EN 61249 .....................................15, 21, 28, 30 EN 61280 .......................................................21 EN 61307 .......................................................15 EN 61326 .......................................................15 EN 61347 .......................................................23 EN 61400 .......................................................15 EN 61582 .......................................................15 EN 61810 .......................................................15 EN 61925 .......................................................16 EN 61951 .......................................................23 EN 61970 .......................................................16 EN 62019 .......................................................21 EN 62059 .......................................................16 EN 62129 .......................................................21 EN 62132 .......................................................16 EN 62141 .......................................................16 EN 62197 .......................................................16 EN 62287 .......................................................16 EN 62319 .......................................................16 EN 62389 .......................................................16 EN 62391 .......................................................16 EN 130500 .....................................................14 EN 130501 .....................................................14 EN 131800 .....................................................14 EN 132401 .....................................................14 ISO 29 ............................................................30 ISO 1189 ........................................................26 ISO 1409 ........................................................40 ISO 1496 ........................................................23 ISO 2575 ........................................................23 ISO 2596 ........................................................16 ISO 2846 ........................................................17 ISO 3408 ........................................................17 ISO 3639 ........................................................26 ISO 3775 ........................................................30 ISO 4241 ........................................................26 ISO 5912 ..................................................16, 21 ISO 6036 ........................................................26 ISO 6149 ........................................................17 ISO TR 8363....................................................31 ISO 8379 ........................................................23 ISO 8573 ........................................................31 ISO 9123 ........................................................31 ISO 9128 ..................................................17, 30 ISO 9974 ........................................................17 ISO 10014 ................................................17, 30 ISO 10204 ................................................17, 29 ISO 11084 ......................................................17 ISO 11886 ......................................................21 ISO 12608 ......................................................26 ISO 12647 ......................................................17 ISO 12649 ......................................................17 ISO 13291 ......................................................17 ISO 13312 ......................................................17 ISO 14025 ......................................................17 ISO/IEC 14143 ................................................17 ISO/IEC 14443 ................................................21 ISO 14531 ......................................................17 ISO 15076 ......................................................17 ISO/IEC 15438 ................................................17 ISO 15713 ......................................................18 ISO 15994 ......................................................18 ISO 16564 ......................................................23 ISO 16992 ......................................................18 ISO 17332 ......................................................26 ISO 17475 ......................................................21 ISO 17500 ......................................................18 ISO/IEC 18031 ................................................18 ISO 18185 ......................................................18 ISO 19703 ......................................................18 ISO/IEC 19757 ................................................18 ISO/IEC 20000 ................................................19

53