Update Standards - February 2007 - BSI Shop

BRITISH STANDARDS BS 434:Bitumen road emulsions

BS 434-2:2006

BS 4592-2:2006

BS 5392:-

Expanded metal gratings.

Acrylonitrile-butadiene-styrene

Specification

(ABS) fittings for use with ABS

supersedes BS 4592-2:1987 ISBN 0 580 48255 3 £34.00 members, £68.00 non-members

pressure pipe

B/208/1

Code of practice for the use of cationic bitumen emulsions on roads and other paved areas

Specification


BS 4592-3:2006


BS 5392-1:2006

Cold formed metal planks.

PRI/88/2

Specification

B/510


BS 6068:-

B/208/1

BS 2000:-

Water quality

Methods of test for petroleum and its products

BS 6068-2.99:-

BS 4592-4:2006

Physical, chemical and

Glass reinforced plastics (GRP)

BS 2000-391:-

open bar gratings. Specification

Determination of aromatic

supersedes BS 4592-4:1992 ISBN 0 580 48257 X £34.00 members, £68.00 non-members

hydrocarbon types in middle distillates. High performance liquid

biochemical methods. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge.

B/208/1

chromatography method with refractive index detection

Method using extraction and gas chromatography/mass spectrometry

BS 4592-5:2006 BS 4592:-

Solid plates in metal and glass

Industrial type flooring and stair

reinforced plastics (GRP).

treads

Specification

BS 6068-5.45:Biological methods. Evaluation of genotoxicity by measurement of


BS 4592-0:2006 Common design requirements and

the induction of micronuclei. Mixed population method using the cell

B/208/1

line V79

recommendations for installation

supersedes BS 4592 Parts 1-5 ISBN 0 580 48253 7 £49.00 members, £98.00 non-members

BS 6700:2006

BS 5391:-

Design, installation, testing and

Acrylonitrile-butadiene-styrene

B/208/1

maintenance of services supplying

(ABS) pressure pipe

water for domestic use within buildings and their curtilages.

BS 4592-1:2006

BS 5391-1:2006

Specification

Metal open bar gratings.

Specification

Specification

supersedes BS 5391-1:1976 ISBN 0 580 49182 X

supersedes BS 6700:1997 ISBN 0 580 49786 0 £90.00 members, £180.00 non-members

supersedes BS 4592-1:1995 ISBN 0 580 48254 5

£49.00 members, £98.00 non-members


B/504/2 PRI/88/2/P4

B/208/1

BRITISH STANDARDS

Page 1 of 71

BS 7270:2006

BS EN ISO 140-18:2006

DD CEN/TS 1071:-

Metallic materials. Constant

Laboratory measurement of sound

Advanced technical ceramics.

amplitude strain controlled axial

generated by rainfall on building

Methods of test for ceramic

fatigue. Method of test

elements

coatings

supersedes BS 7270:1990 ISBN 0 580 49023 8 £49.00 members, £98.00 non-members

no current standard is superseded ISBN 0 580 49831 X £49.00 members, £98.00 non-members ISE/NFE/4/6

EH/1/6

BS 8468:-

BS EN 284:2006

Respiratory protective devices for

Swap bodies. Non-stackable swap

use against chemical, biological,

bodies of class C. Dimensions and

radiological and nuclear (CBRN)

general requirements

agents

supersedes BS EN 284:1992 ISBN 978 058049902 9 £49.00 members, £98.00 non-members

BS 8468-2:2006

DD CEN/TS 1071-11:2005 the Stoney formula

no current standard is superseded ISBN 978 058049935 7 £17.00 members, £34.00 non-members RPI/13

BS EN ISO 1269:2006 Plastics. Homopolymer and

TW/1

Negative pressure, air purifying

Determination of internal stress by

devices with full face mask.

copolymer resins of vinyl chloride. Determination of volatile matter (including water)

Specification

BS EN 415:-

no current standard is superseded ISBN 0 580 49762 3

Safety of packaging machines

supersedes BS 2782-4:Method 454D:1978 ISBN 0 580 49816 6 £28.00 members, £56.00 non-members


PH/4

BS EN 415-6:2006

PRI/82

Pallet wrapping machines

no current standard is superseded ISBN 978 058049933 3

BS EN 1297:2004


BS EN PUBLICATIONS

Flexible sheets for waterproofing.

MCE/3/3

BS EN ISO 105:-

Bitumen, plastic and rubber sheets for roof waterproofing. Method of

Textiles. Tests for colour fastness

artificial ageing by long term

BS EN 541:2006

exposure to the combination of UV

BS EN ISO 105-C12:2006

Aluminium and aluminium alloys.

radiation, elevated temperature

Colour fastness to industrial

Rolled products for cans, closures

and water

laundering

and lids. Specifications

no current standard is superseded ISBN 0 580 49848 4 £28.00 members, £56.00 non-members



B/546/2 NFE/35

TCI/81

BS EN 1337:BS EN ISO 140:-

BS EN 545:2006

Acoustics. Measurement of sound

Ductile iron pipes, fittings,

insulation in buildings and of

accessories and their joints for

building elements

water pipelines. Requirements and

Structural bearings

BS EN 1337-2:2004 Sliding elements

test methods

supersedes BS EN 545:2002 ISBN 0 580 49821 2 £74.00 members, £148.00 non-members PSE/10

BS EN PUBLICATIONS

supersedes BS EN 1337-2:2001 which is withdrawn, partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49849 2 £74.00 members, £148.00 non-members B/522

Page 2 of 71

BS EN 1337-3:2005

BS EN 1881:2006

BS EN 1993-1-4:2006

Elastomeric bearings

Products and systems for the

Supplementary rules for stainless

partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49850 6 £74.00 members, £148.00 non-members B/522

protection and repair of concrete

steels

structures. Test methods. Testing

no current standard is superseded ISBN 0 580 49666 X £56.00 members, £112.00 non-members

BS EN 1337-5:2005

of anchoring products by the pull-out method


B/525/31

B/517/8

Pot bearings

partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49851 4 £68.00 members, £136.00 non-members B/522

BS EN 1993-1-5:2006 Plated structural elements

partially supersedes BS 449-2:1969, BS 5400-3:2000 and BS 5950-1:2000 ISBN 0 580 49667 8 £68.00 members, £136.00 non-members B/525/31

BS EN 1926:2006 Natural stone test methods. Determination of uniaxial compressive strength

supersedes BS EN 1926:1999 ISBN 978 058049936 4

BS EN 1337-7:2004

BS EN 1993-1-11:2006


Spherical and cylindrical PTFE

B/545

bearings

supersedes BS EN 1337-7:2001 which is withdrawn, partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49852 2 £49.00 members, £98.00 non-members B/522

BS EN 1936:2006 Natural stone test methods.

B/525/31

Determination of real density and apparent density, and of total and

BS EN 2335:2005


Personal eye protection. Mesh eye and face protectors

Aerospace series. Bearings, spherical plain in corrosion

B/545

supersedes BS EN 1731:1998 ISBN 0 580 49882 4 £34.00 members, £68.00 non-members

resisting steel without assembly slot. Dimensions and loads


BS EN 1993:-

PH/2/2

components


open porosity

BS EN 1731:2006

Design of structures with tension

Eurocode 3. Design of steel

ACE/12

structures

BS EN ISO 1805:2006 Fishing nets. Determination of

BS EN 1993-1:-

BS EN 3155:-

breaking force and knot breaking

General rules

Aerospace series. Electrical contacts used in elements of

force of netting yarns


connection

BS EN 1993-1-3:2006 Supplementary rules for

TCI/77

cold-formed members and

BS EN 3155-014:2006

sheeting

Contacts, electrical, male, type A,

supersedes DD ENV 1993-1-3:2001 which is withdrawn and partially supersedes BS 5950-5:1998, BS 5950-6:1995 and BS 5950-9:1994 ISBN 0 580 49665 1

crimp, class S. Product standard


no current standard is superseded ISBN 978 058049937 1 £28.00 members, £56.00 non-members ACE/6/-/3

B/525/31

BS EN PUBLICATIONS

Page 3 of 71

BS EN 3155-015:2006

BS EN 3645-004:2006 BS EN ISO 3166-1:2006

Contacts, electrical, female, type A,

Receptacle, hermetic, square

Country codes

crimp, class S. Product standard

flange mounting. Product standard


supersedes BS EN ISO 3166-1:1998 ISBN 0 580 49824 7 £74.00 members, £148.00 non-members IDT/2/11

BS EN 3155-030:2006

BS EN 3339:2006

BS EN 3645-005:2006

Contacts, electrical, coaxial,

Aerospace series. Aluminium alloy

Receptacle, hermetic, round

shielded, size 12, male, type D,

AL-P7010-T76. Die forgings. a $3L

flange, brasage mounting. Product

crimp, class R. Product standard

200 mm

standard

no current standard is superseded ISBN 0 580 49948 7 £28.00 members, £56.00 non-members ACE/6/-/3



BS EN 3155-031:2006

BS EN 3476:2006

BS EN 3645-006:2006

Contacts, electrical, coaxial,

Aerospace series. Steel

Protective cover for receptacle.

shielded, size 12, female, type D,

FE-PL1501 (30CrMo12). Air

Product standard

crimp, class R. Product standard

melted. Softened. Forging stock. a


or D $3L 300 mm



ACE/6/-/3

no current standard is superseded ISBN 978 058049944 9 £28.00 members, £56.00 non-members


ACE/61/-/15 BS EN 3645-009:2006 BS EN 3155-035:2006

Receptacle, round flange, jam nut

Contacts, electrical, triaxial, size

BS EN 3645:-

mounting. Product standard

08, female, type D, crimp, class R.

Aerospace series. Connectors,

Product standard

electrical, circular, scoop-proof,


triple start threaded coupling,



200$0DC continuous

operating temperature 175$0DC or

ACE/6/-/3 BS EN 3645-010:2006 BS EN 3645-003:2006

Receptacle, hermetic, round

BS EN 3155-059:2006

Receptacle square flange

flange, jam nut mounting. Product

Contacts, electrical, coaxial, size

mounting. Product standard

standard

16, female, type D, solder, class R. Product standard



ACE/6/-/3


BS EN ISO 3166:Codes for the representation of names of countries and their subdivisions

BS EN PUBLICATIONS

Page 4 of 71

BS EN 3645-011:2006

BS EN 12588:2006 BS EN ISO 9333:2006

Lanyard release plug with

Lead and lead alloys. Rolled lead

Dentistry. Brazing materials

grounding fingers. Type 1. Product standard


sheet for building purposes

supersedes BS EN 29333:1992 ISBN 0 580 49735 6 £34.00 members, £68.00 non-members CH/106/2

supersedes BS EN 12588:1999 ISBN 978 058049960 9 £34.00 members, £68.00 non-members NFE/22

BS EN 10130:2006

BS EN 12788:2005

BS EN 3645-012:2006

Cold rolled low carbon steel flat


Lanyard release plug with

products for cold forming.

Mechanical properties of ceramic

grounding fingers. Type 2. Product

Technical delivery conditions

composites at high temperature

standard



under inert atmosphere. Determination of flexural strength

ISE/10

supersedes DD ENV 12788:1998 ISBN 0 580 49862 X £34.00 members, £68.00 non-members RPI/13

BS EN 10300:2005 BS EN 3716:-

Steel tubes and fittings for onshore

Aerospace series. Connector,

and offshore pipelines. Bitumen hot

single-way with triaxial interface,

applied materials for external

BS EN 12916:2006 (BS 2000-391:2006)

for transmission of digital data

coating

Petroleum products. Determination

supersedes BS 4147:1980 ISBN 0 580 49877 8

of aromatic hydrocarbon types in


performance liquid

BS EN 3716-005:2006 Crimp receptacle. Product

middle distillates. High

ISE/16/-/11

standard


refractive index detection

supersedes BS EN 12916:2000 ISBN 0 580 49803 4

BS EN 12012:-


Plastics and rubber machines. Size

ACE/6/-/3

chromatography method with

reduction machines

PTI/13

BS EN ISO 4618:2006

BS EN 12012-4:2006

BS EN 13234:2006

Paints and varnishes. Terms and

Safety requirements for


definitions

agglomerators


supersedes BS EN 971-1:1996, BS EN ISO 4618-2:2000 and BS EN ISO 4618-3:2000 ISBN 0 580 49555 8 £74.00 members, £148.00 non-members STI/11


composites at ambient temperature. Evaluation of the resistance to crack propagation by

MCE/3/2

supersedes DD ENV 13234:2000 ISBN 0 580 49864 6 £34.00 members, £68.00 non-members

BS EN 12372:2006 BS EN ISO 5840:2005 Cardiovascular implants. Cardiac valve prostheses

supersedes BS 6444-1:1990 and BS EN 12006-1:1999 ISBN 0 580 49872 7 £74.00 members, £148.00 non-members CH/150/2 BS EN PUBLICATIONS

notch sensitivity testing

Natural stone test methods.

RPI/13

Determination of flexural strength under concentrated load

supersedes BS EN 12372:1999 ISBN 978 058049920 3 £34.00 members, £68.00 non-members B/545

Page 5 of 71

BS EN 13235:2006

BS EN 13981:-

BS EN 14358:2006



Timber structures. Calculation of


Products for structural railway

characteristic 5-percentile values

composites at high temperature

applications. Technical conditions

and acceptance criteria for a

under inert atmosphere.

for inspection and delivery

sample


Determination of creep behaviour

supersedes DD ENV 13235:2000 ISBN 0 580 49863 8 £34.00 members, £68.00 non-members

BS EN 13981-4:2006 Forgings

RPI/13

B/518


BS EN 13307:-

BS EN 14439:2006

NFE/35


Timber blanks and semi-finished profiles for non-structural uses

Cranes. Safety. Tower cranes

BS EN 14220:2006 Timber and wood-based materials

MHE/3/5

BS EN 13307-1:2006

in external windows, external door

Requirements

leaves and external doorframes.


Requirements and specifications

BS EN 14452:2005


Devices to prevent pollution by

B/543

backflow of potable water. Pipe interrupter with atmospheric vent

B/543

and moving element DN 10 to DN 20. Family D, type B

BS EN ISO 13705:2006 Petroleum, petrochemical and

BS EN 14221:2006

natural gas industries. Fired

Timber and wood-based materials

heaters for general refinery service

in internal windows, internal door

supersedes BS EN ISO 13705:2002 ISBN 0 580 49790 9

leaves and internal doorframes.


PSE/17/-/6


B/505/4

Requirements and specifications


BS EN 14512:2006 Tanks for the transport of


dangerous goods. Tank equipment

B/543 BS EN 13803:-

for the transport of liquid chemicals. Hinged manhole cover

Railway applications. Track. Track alignment design parameters.

BS EN 14255:-

Track gauges 1435 mm and wider

Measurement and assessment of personal exposures to incoherent optical radiation

BS EN 13803-2:2006

and neckrings with pivoting bolts

no current standard is superseded ISBN 0 580 49880 8 £28.00 members, £56.00 non-members AUE/18

Switches and crossings and comparable alignment design

BS EN 14255-4:2006

situations with abrupt changes of

Terminology and quantities used in

curvature

UV-, visible and IR-exposure


measurements


RAE/2/-/3

BS EN PUBLICATIONS

no current standard is superseded ISBN 0 580 49676 7 £34.00 members, £68.00 non-members CPL/34/10

BS EN 14620:Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0$0DC and -165$0DC

Page 6 of 71

BS EN 14620-1:2006

BS EN 14704:-

BS EN 14885:2006

General

Determination of the elasticity of

Chemical disinfectants and


fabrics

antiseptics. Application of European standards for chemical

PVE/15

disinfectants and antiseptics

BS EN 14704-3:2006


Narrow fabrics


BS EN 14620-2:2006 Metallic components


CH/216 TCI/24 BS EN 14932:2006

PVE/15

Plastics. Stretch thermoplastic

BS EN 14879:-

films for wrapping bales.

Organic coating systems and

Requirements and test methods

linings for protection of industrial

BS EN 14620-3:2006

apparatus and plants against

Concrete components

corrosion caused by aggressive


media

PVE/15

no current standard is superseded ISBN 978 058049966 1 £56.00 members, £112.00 non-members PRI/75

BS EN 14879-2:2006

BS EN 14982:2006

Coatings on metallic components

Plastics piping systems.


BS EN 14620-4:2006 Insulation components

supersedes BS 7777-3:1993 ISBN 0 580 49778 X £56.00 members, £112.00 non-members

Thermoplastics shafts or risers for inspection chambers and

ISE/16

PVE/15

BS EN 14879-3:2006 Coatings on concrete components


Testing, drying, purging and

BS EN 14984:2006

ISE/16

cool-down


stiffness

no current standard is superseded ISBN 0 580 49721 6 £34.00 members, £68.00 non-members PRI/88/1/P1


BS EN 14620-5:2006

manholes. Determination of ring

Liming materials. Determination of product effect on soil pH. Soil incubation method

BS EN ISO 14880:-

PVE/15


Optics and photonics. Microlens arrays

CII/37

BS EN 14673:2006

BS EN ISO 14880-2:2006

Safety of machinery. Safety

Test methods for wavefront

requirements for hydraulically

BS EN 14987:2006

aberrations

powered open die hot forging presses for the forging of steel and non-ferrous metals



Plastics. Evaluation of disposability


Test scheme for final acceptance

CPW/172

MCE/23

in waste water treatment plants. and specifications

no current standard is superseded ISBN 0 580 49792 5 £28.00 members, £56.00 non-members PRI/21

BS EN PUBLICATIONS

Page 7 of 71

DD CEN/TS 14997:2006

BS EN 15035:2006

BS EN 15205:2006

Characterization of waste.

Heating boilers. Special

Determination of hexavalent

Leaching behaviour tests.

requirements for oil fired room

chromium in corrosion protection

Influence of pH on leaching with

sealed units up to 70 kW

layers. Qualitative analysis

continuous pH-control




RHE/10

STI/33

B/508/3 DD CEN/TS 15084:2006

BS EN 15207:2006

DD CEN/TS 15022:-

Liming materials. Guide to the

Tanks for transport of dangerous

Copper and copper alloys.

determination of the lime

goods. Plug/socket connection and

Determination of tin content

requirement

supply characteristics for service


equipment in hazardous areas with

DD CEN/TS 15022-4:2006 Medium tin content. Flame atomic

24 V nominal supply voltage

CII/37

absorption spectrometry method (FAAS)


AUE/18


BS EN 15109:2006 Surface active agents.

NFE/34

DD CEN/TS 15023:-

Determination of the active matter

DD CEN/TS 15211:2006

content of

Health informatics. Mapping of

alkylamidopropylbetaines

hierarchical message descriptions


to XML



Copper and copper alloys. Determination of nickel content

CII/34


IST/35 DD CEN/TS 15023-3:2006

BS EN 15146:2006

Flame atomic absorption spectrometry method (FAAS)


NFE/34

Solid softwood panelling and

DD CEN/TS 15231:2006

cladding. Machined profiles without

Open data communication in

tongue and groove

building automation, controls and


building management. Mapping between Lonworks and BACnet

B/543 DD CEN/TS 15025:2006

no current standard is superseded ISBN 0 580 49889 1 £34.00 members, £68.00 non-members RHE/16

Copper and copper alloys.

BS EN 15202:2006

Determination of magnesium

LPG equipment and accessories.

content. Flame atomic absorption spectrometry method (FAAS)


NFE/34

Essential operational dimensions

BS EN 15238:2006

for LPG cylinder valve outlet and

Soil improvers and growing media.

associated equipment connections

Determination of quantity for


materials with particle size greater than 60 mm

PVE/19

no current standard is superseded ISBN 978 058049921 0 £34.00 members, £68.00 non-members AW/20

BS EN PUBLICATIONS

Page 8 of 71

DD CEN/TS 15451:2006

DD CEN/TS 15478:2006

BS EN ISO 18753:2005

Fertilizers. Determination of

Fertilizers. Determination of total

Fine ceramics (advanced

chelating agents. Determination of

nitrogen in urea

ceramics, advanced technical

iron chelated by EDDHSA by ion


ceramics). Determination of

pair chromatography


absolute density of ceramic powders by pyknometer

CII/37 CII/37 DD CEN/TS 15479:2006

supersedes BS EN 725-7:1996 ISBN 0 580 49892 1 £34.00 members, £68.00 non-members RPI/13

Fertilizers. Spectrophotometric

DD CEN/TS 15452:2006

determination of biuret in urea

Fertilizers. Determination of


chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC

BS EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical

CII/37


ceramics). Determination of fracture toughness of monolithic


ceramics at room temperature by

BS EN ISO 15535:2006

CII/37

the surface crack in flexure (SCF)

General requirements for

method

establishing anthropometric


databases

supersedes BS EN ISO 15535:2003 ISBN 978 058049969 2 £49.00 members, £98.00 non-members

DD CEN/TS 15475:2006 Fertilizers. Determination of ammoniacal nitrogen


RPI/13 PH/9/4 BS EN ISO 18757:2005


CII/37

Fine ceramics (advanced

BS EN ISO 17201:-

ceramics, advanced technical

Acoustics. Noise from shooting

ceramics). Determination of

ranges

specific surface area of ceramic

DD CEN/TS 15476:2006

powders by gas adsorption using

Fertilizers. Determination of nitric

the BET method

BS EN ISO 17201-2:2006

and ammoniacal nitrogen

supersedes BS EN 725-6:1996 ISBN 0 580 49891 3 £34.00 members, £68.00 non-members

Estimation of muzzle blast and

according to Devarda

projectile sound by calculation

no current standard is superseded ISBN 0 580 49800 X £17.00 members, £34.00 non-members CII/37


RPI/13

EH/1/3

BS EN ISO 20776:Clinical laboratory testing and in

DD CEN/TS 15477:2006

vitro diagnostic test systems.

BS EN ISO 18453:2005

Fertilizers. Determination of the

Susceptibility testing of infectious

Natural gas. Correlation between

water-soluble potassium content

agents and evaluation of

water content and water dew point


performance of antimicrobial



CII/37

susceptibility test devices


PTI/15

BS EN PUBLICATIONS

Page 9 of 71

BS EN ISO 20776-1:2006

BS EN ISO 21182:2006

BS EN ISO 24013:2006

Reference method for testing the in

Light conveyor belts. Determination

Optics and photonics. Lasers and

vitro activity of antimicrobial agents

of the coefficient of friction

laser-related equipment.

against rapidly growing aerobic


Measurement of phase retardation

bacteria involved in infectious diseases


of optical components for polarized laser radiation

PRI/67

CH/212

BS EN ISO 21183:Light conveyor belts

BS EN ISO 21178:2006

no current standard is superseded ISBN 0 580 49898 0 £49.00 members, £98.00 non-members CPW/172

BS EN 50116:2006 BS EN ISO 21183-1:2006


Information technology equipment.

Principal characteristics and

of electrical resistances

Routine electrical safety testing in

applications


production

supersedes BS EN 873:1997 ISBN 0 580 49808 5 PRI/67


PRI/67

supersedes BS EN 50116:1996 which remains current ISBN 0 580 49860 3 £28.00 members, £56.00 non-members EPL/108

BS EN ISO 21179:2006 BS EN ISO 21549:-

Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt

Health informatics. Patient

BS EN 50470:-

healthcard data

Electricity metering equipment (A.C.)

supersedes BS EN 1718:1999 ISBN 0 580 49804 2 BS EN ISO 21549-4:2006


PRI/67

BS EN ISO 21180:2006

Extended clinical data

BS EN 50470-1:2006


General requirements, tests and test conditions. Metering equipment (class indexes A, B and

IST/35



of the maximum tensile strength


BS EN ISO 22675:2006 Prosthetics. Testing of ankle-foot

PRI/67


Requirements and test methods

BS EN 50470-2:2006 Particular requirements. Electromechanical meters for

CH/168

of the relaxed elastic modulus

active energy (class indexes A and B)

supersedes BS EN 1723:2000 ISBN 0 580 49806 9 £34.00 members, £68.00 non-members PRI/67

BS EN PUBLICATIONS

PEL/13

devices and foot units.


BS EN ISO 21181:2006

C)

no current standard is superseded ISBN 0 580 49811 5 £49.00 members, £98.00 non-members PEL/13

Page 10 of 71

BS EN 50470-3:2006

BS EN 60745:-

BS EN 60870:-

Particular requirements. Static

Hand-held motor-operated electric

Telecontrol equipment and

meters for active energy (class

tools. Safety

systems

BS EN 60745-1:2006

BS EN 60870-5-104:2006

General requirements

Transmission protocols. Network

supersedes BS EN 606745-1:2003 which remains current ISBN 0 580 49842 5 £96.00 members, £192.00 non-members CPL/61/6

access for IEC 60870-5-101 using

indexes A, B and C)

no current standard is superseded ISBN 0 580 49812 3 £56.00 members, £112.00 non-members PEL/13

BS EN 55015:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting

standard transport profiles

supersedes BS EN 60870-5-104:2001 ISBN 0 580 49781 X £74.00 members, £148.00 non-members PEL/57

BS EN 60745-2-15:2006

and similar equipment

supersedes BS EN 55015:2001 which remains current ISBN 978 058050001 5 £64.00 members, £128.00 non-members

GEL/210/11

Particular requirements for hedge

BS EN 60904:-

trimmers

Photovoltaic devices

supersedes BS EN 50144-2-15:2001 which remains current ISBN 0 580 49841 7 £49.00 members, £98.00 non-members

Measurement of photovoltaic

CPL/61/6

BS EN 60749:-

and immunity measuring apparatus

Semiconductor devices.

and methods

current-voltage characteristics


BS EN 55016:Specification for radio disturbance

BS EN 60904-1:2006

GEL/82

Mechanical and climatic test methods

BS EN 60958:-

BS EN 55016-1-3:2006 Radio disturbance and immunity

Digital audio interface

BS EN 60749-35:2006

measuring apparatus. Ancillary

Acoustic microscopy for plastic

equipment. Disturbance power

supersedes BS EN 55016-1-3:2004 which remains current ISBN 978 058050002 2 £56.00 members, £112.00 non-members GEL/210/12

encapsulated electronic

BS EN 60958-3:2006

components

Consumer applications


EPL/47

supersedes BS EN 60958-3:2003 which remains current ISBN 0 580 49677 5 £68.00 members, £136.00 non-members EPL/100

BS EN 60216:BS EN 60749-39:2006

Electrical insulating materials. Thermal endurance properties

Measurement of moisture

BS EN 61000:-

diffusivity and water solubility in

Electromagnetic compatibility

organic materials used for

(EMC)

BS EN 60216-6:2006

semiconductor components

Determination of thermal

partially supersedes BS EN 60749:1999 ISBN 0 580 49866 2

BS EN 61000-4-5:2006


techniques. Surge immunity test

endurance indices (TI and RTE) of an insulating material using the fixed time frame method

EPL/47

supersedes BS EN 60216-6:2004 ISBN 0 580 49815 8 £68.00 members, £136.00 non-members GEL/112

BS EN PUBLICATIONS

Testing and measurement

supersedes BS EN 61000-4-5:1995 which remains current ISBN 0 580 49796 8 £68.00 members, £136.00 non-members GEL/210/12

Page 11 of 71

BS EN 62002-1:2006 BS EN 61204:-

Interface specification

BS EN 62317:-

Low voltage power supplies, D.C.


Ferrite cores. Dimensions

Output

EPL/100

BS EN 61204-7:2006 Safety requirements


Interface conformance testing


EPL/51

EPL/100

BS EN 61747:-

E-cores

partially supersedes BS EN 62358:2004 ISBN 978 058049915 9 £34.00 members, £68.00 non-members

BS EN 62002-2:2006

PEL/22

BS EN 62317-8:2006

BS EN 62384:2006 D.C. or A.C. supplied electronic

Liquid crystal display devices

control gear for LED modules.

BS EN 62047:-

Performance requirements

Semiconductor devices.

BS EN 61747-3:2006

no current standard is superseded ISBN 0 580 49678 3 £34.00 members, £68.00 non-members CPL/34/3

Micro-electromechanical devices

Liquid crystal display (LCD) cells. Sectional specification


BS EN 62047-2:2006 Tensile testing method of thin film materials

EPL/47

BS EN 61937:-


BS ENs IMPLEMENTED BY AMENDMENT BS EN ISO 13628:-

EPL/47

Digital audio. Interface for

Petroleum and natural gas industries. Design and operation of

non-linear PCM encoded audio bitstreams applying IEC 60958

subsea production systems

BS EN 62076:2006 Industrial electroheating installations. Test methods for

BS EN 61937-5:2006

BS EN ISO 13628-10:2006

induction channel and induction

Non-linear PCM bitstreams

Specification for bonded flexible

crucible furnaces

according to the DTS (digital

supersedes BS 7690:1993 and BS EN 60646:1999 ISBN 0 580 48991 4 £34.00 members, £68.00 non-members PEL/27

theatre systems) format(s)

supersedes BS EN 61937-5:2002 which remains current ISBN 978 058049903 6 £34.00 members, £68.00 non-members

pipe

BS EN ISO 13679:2006 Petroleum and natural gas industries. Procedures for testing casing and tubing connections

EPL/100 BS EN 62271:BS EN 62002:Mobile and portable DVB-T/H radio

High-voltage switchgear and

BS EN ISO 16712:2006

controlgear

Water quality. Determination of acute toxicity of marine or

access

estuarine sediment to amphipods

BS EN 62271-3:2006 Digital interfaces based on IEC 61850


BS EN ISO 17294:Water quality. Application of inductively coupled plasma mass


spectrometry (ICP-MS)

PEL/17/1 BS ENs IMPLEMENTED BY AMENDMENT

Page 12 of 71

BS EN ISO 17294-1:2006

BS ISO 4831:2006

BS ISO 6886:2006

General guidelines

Microbiology of food and animal

Animal and vegetable fats and oils.

feeding stuffs. Horizontal method

Determination of oxidative stability

for the detection and enumeration

(accelerated oxidation test)

of coliforms. Most probable number

supersedes BS 684-2.25:1997 ISBN 0 580 49768 2 £34.00 members, £68.00 non-members

BS EN ISO 19739:2005 Natural gas. Determination of

technique

sulfur compounds using gas


chromatography

AW/307 AW/9 BS ISO/IEC 7816:-

BS IMPLEMENTATIONS

Identification cards. Integrated

BS ISO 368:2006

DD ISO/TS 4869:-

Spinning preparatory, spinning and

Acoustics. Hearing protectors

circuit cards

doubling (twisting) machinery.

BS ISO/IEC 7816-3:2006

Tubes for ring-spinning, doubling and twisting spindles, taper 1:38

DD ISO/TS 4869-5:2006

Cards with contacts. Electrical

and 1:64

Method for estimation of noise

interface and transmission

supersedes BS ISO 368:1991 ISBN 0 580 49839 5

reduction using fitting by

protocols


inexperienced test subjects



TCI/33

IST/17 EH/1/1

BS ISO 871:2006 BS ISO 8068:2006

Plastics. Determination of ignition temperature using a hot-air furnace

BS ISO 5700:2006

Lubricants, industrial oils and

supersedes BS ISO 871:1996 ISBN 0 580 49847 6 £28.00 members, £56.00 non-members

Wheeled tractors for agriculture

related products (class L). Family T

and forestry. Roll-over protective

(turbines). Specification for

structures (ROPS). Static test

lubricating oils for turbines

method and acceptance conditions


PRI/26

supersedes BS 5947:1992 ISBN 978 058049957 9 £56.00 members, £112.00 non-members

BS ISO 4306:Cranes. Vocabulary

PTI/7 AGE/6 BS ISO 8422:2006

BS ISO 4306-5:2005 Bridge and gantry cranes


BS ISO 6743:-

Sequential sampling plans for


inspection by attributes

related products (class L).

supersedes BS 6001-4:1994 ISBN 978 058049584 1 £56.00 members, £112.00 non-members

Classification

MHE/3/3

SS/5

BS ISO 6743-5:2006 Family T (turbines)

supersedes BS 6413-5:1988 ISBN 0 580 49878 6

BS ISO 9911:2006 Agricultural irrigation equipment.


Manually operated small plastics

PTI/7

valves

no current standard is superseded ISBN 0 580 49770 4 £34.00 members, £68.00 non-members AGE/30

BS IMPLEMENTATIONS

Page 13 of 71

BS ISO 13300:-

BS ISO 14572:2006

BS ISO/IEC 9973:2006

Sensory analysis. General

Road vehicles. Round, screened

Information technology. Computer

guidance for the staff of a sensory

and unscreened, 60 V and 600 V

graphics, image processing and

evaluation laboratory

multi-core sheathed cables. Test

environmental data representation.

methods and requirements for

Procedures for registration of items

basic and high-performance cables

BS ISO 13300-1:2006

supersedes BS ISO/IEC 9973:1994 ISBN 0 580 49845 X £56.00 members, £112.00 non-members


Staff responsibilities

IST/31


AUE/16 AW/12

BS ISO 11076:2006

BS ISO/IEC 14888:-

Aircraft. Ground-based de-icing/anti-icing methods with

BS ISO 13300-2:2006

fluids

Recruitment and training of panel

supersedes BS ISO 11076:2000 ISBN 0 580 49003 3

leaders


ACE/57

Information technology. Security techniques. Digital signatures with appendix


BS ISO/IEC 14888-3:2006 Discrete logarithm based

AW/12

mechanisms

supersedes BS ISO/IEC 14888-3:1998 ISBN 0 580 49846 8

BS ISO 11534:2006 Iron ores. Determination of tin.

BS ISO 13674:-

Flame atomic absorption

Road vehicles. Test method for the

spectrometric method

quantification of on-centre handling



IST/33

BS ISO 15003:2006 BS ISO 13674-2:2006

ISE/58

BS ISO 11629:2004

Agricultural engineering. Electrical

Transition test

and electronic equipment. Testing


resistance to environmental conditions

AUE/15

Cranes. Measurement of the mass of a crane and its components


supersedes BS 7691:1994 ISBN 0 580 49817 4 £49.00 members, £98.00 non-members AGE/6

DD ISO/TS 13899:Steel. Determination of Mo, Nb and

MHE/3

W contents in alloyed steel.

BS ISO/IEC 15434:2006

Inductively coupled plasma atomic

Information technology. Automatic

emission spectrometric method

identification and data capture

BS ISO 12082:2006

techniques. Syntax for

Processed cheese and processed

high-capacity ADC media

DD ISO/TS 13899-3:2005

cheese products. Calculation of the

supersedes BS ISO/IEC 15434:2005 ISBN 0 580 49857 3 £49.00 members, £98.00 non-members

Determination of W content

content of added citrate


emulsifying agents and


acidifiers/pH-controlling agents, expressed as citric acid

IST/34 ISE/18

supersedes BS 770-11:1997 ISBN 0 580 49865 4 £28.00 members, £56.00 non-members AW/5

BS IMPLEMENTATIONS

Page 14 of 71

BS ISO 15553:2006

BS ISO 17499:2006

BS ISO 19904:-

Water quality. Isolation and

Carbonaceous materials used in

Petroleum and natural gas

identification of Cryptosporidium

the production of aluminium.

industries. Floating offshore

oocysts and Giardia cysts from

Determination of baking level

structures

water

expressed by equivalent


temperature

EH/3/4

BS ISO 19904-1:2006


Monohulls, semi-submersibles and spars

CII/24 BS ISO/IEC 16085:2006 Systems and software engineering.

DD ISO/TS 17996:2006

Life cycle processes. Risk

Cheese. Determination of

management

rheological properties by uniaxial

supersedes BS ISO/IEC 16085:2004 ISBN 978 058049977 7 £56.00 members, £112.00 non-members

compression at constant

B/525/12

BS ISO 20302:2006 Health informatics. Health cards.

displacement rate

IST/15


Numbering system and registration


procedure for issuer identifiers

AW/5 BS ISO 17087:2006

no current standard is superseded ISBN 978 058049910 4 £28.00 members, £56.00 non-members IST/35

Specifications for adhesives used for finger joints in non-structural

BS ISO 18898:2006

lumber products

Rubber. Calibration and verification


of hardness testers


PRI/52

BS ISO 21308:-


Road vehicles. Product data


bodywork manufacturers (BEP)

exchange between chassis and

PRI/20 BS ISO 21308-2:2006

BS ISO 17321:Graphic technology and

DD ISO/TS 19138:2006

photography. Colour

Geographic information. Data

characterization of digital still

quality measures

cameras (DSCs)


BS ISO 17321-1:2006

Dimensional bodywork exchange parameters


AUE/9 IST/36

Stimuli, metrology, and test

BS ISO 21427:-

procedures


Water quality. Evaluation of

BS ISO 19903:2006

genotoxicity by measurement of


the induction of micronuclei

industries. Fixed concrete offshore

CPW/42

structures


BS ISO 21427-2:2006 (BS 6068-5.45:2006)


Mixed population method using the

B/525/12

cell line V79

no current standard is superseded ISBN 0 580 49771 2 £49.00 members, £98.00 non-members EH/3/5 BS IMPLEMENTATIONS

Page 15 of 71

BS ISO 21485:2006

BS ISO 22896:2006

BS ISO/IEC 24730:-

Textile machinery. Draw frame for

Road vehicles. Deployment and

Information technology. Real-time

cotton spinning. Vocabulary and

sensor bus for occupant safety

locating systems (RTLS)

principles of construction

systems


no current standard is superseded ISBN 0 580 49772 0 £68.00 members, £136.00 non-members TCI/33

BS ISO/IEC 24730-2:2006 2,4 GHz air interface protocol

AUE/16

BS ISO 21543:2006

BS ISO 23058:2006

Milk products. Guidelines for the

Milk and milk products. Ovine and

application of near infrared

caprine rennets. Determination of

spectrometry

total milk-clotting activity


no current standard is superseded ISBN 0 580 49763 1 £34.00 members, £68.00 non-members AW/5

no current standard is superseded ISBN 978 058049975 3 £56.00 members, £112.00 non-members IST/34

DD ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification

AW/5

and design, installation, testing and inspection

BS ISO 21988:2006

BS ISO 23273:-

Abrasion-resistant cast irons.

Fuel cell road vehicles. Safety

Classification

specifications

no current standard is superseded ISBN 978 058049976 0 £64.00 members, £128.00 non-members PSE/17/-/6

BS ISO 23273-3:2006

DD ISO/TS 26844:2006

Protection of persons against

Milk and milk products.

electric shock

Determination of antimicrobial


residues. Tube diffusion test


ISE/35

BS ISO 22032:2006 (BS 6068-2.99:2006)



Water quality. Determination of

PEL/69

selected polybrominated diphenyl


AW/5

ethers in sediment and sewage sludge. Method using extraction

BS ISO 23833:2006

and gas chromatography/mass

Microbeam analysis. Electron

DD ISO/PAS 28003:2006

spectrometry

probe microanalysis (EPMA).

Security management systems for


Vocabulary

the supply chain. Requirements for


bodies providing audit and

EH/3/2

certification of supply chain security management systems

CII/9 BS ISO 22779:2006 Metallic coatings. Physical

BS ISO 24342:2006

vapour-deposited coatings of

Resilient floor-covering tiles.

aluminium. Specification and test

Determination of side length, edge

methods

straightness and squareness

SME/32



STI/33

BS IMPLEMENTATIONS


PRI/60

Page 16 of 71

BS IEC 62275:2006

PD CEN/TR 15310-4:2006

PD ISO/TR 17165-2:2006

Cable management systems.

Guidance on procedures for

Recommended practices for

Cable ties for electrical installations

sample packaging, storage,

hydraulic hose assemblies


preservation, transport and

no current standard is superseded ISBN 0 580 49867 0 £49.00 members, £98.00 non-members MCE/18/-/4

delivery

PEL/213

no current standard is superseded ISBN 0 580 49836 0 £49.00 members, £98.00 non-members B/508/3

PUBLISHED DOCUMENTS

AEROSPACE SERIES

PD 6689:2006

PD CEN/TR 15310-5:2006

BS N:-

Surface dressing. Guidance on the

Guidance on the process of

Aircraft oxygen systems and

use of BS EN 12271

defining the sampling plan

equipment



BS 5N 100-5:2006

B/508/3

B/510/2

Guide to fire and explosion hazards associated with oxygen, including handling, storage and

PD CEN/TR 15310:-

PD CEN/TR 15472:2006

replenishment


Postal services. Measurement of

Sampling of waste materials

transit times for parcels by the use

supersedes BS 4N 100-5:1999 ISBN 0 580 49312 1 £34.00 members, £68.00 non-members

of a track and trace system


PD CEN/TR 15310-1:2006 Guidance on selection and application of criteria for sampling

ACE/38

SVS/4

PUBLICLY AVAILABLE SPECIFICATIONS

under various conditions

no current standard is superseded ISBN 0 580 49833 6 £74.00 members, £148.00 non-members B/508/3

PD CISPR/TR 16:-

PAS 69:2006

Specification for radio disturbance

Guidelines for the specification and


installation of vehicle security

and methods

barriers


PD CEN/TR 15310-2:2006 Guidance on sampling techniques

PD CISPR/TR 16-4-5:2006


Uncertainties, statistics and limit modelling. Conditions for the use of alternative test methods

B/508/3


PD CEN/TR 15310-3:2006 sub-sampling in the field

PD ISO/TR 17165:-


Hydraulic fluid power. Hose

Guidance on codes of practice, standardised methods and regulations for cell-based

GEL/210/12

Guidance on procedures for

PAS 83:2006

therapeutics


assemblies

B/508/3

PUBLICLY AVAILABLE SPECIFICATIONS

Page 17 of 71

PAS 90:2006

KIT 189

BS 6068-2.91:-

Specification for safe working

BS 6465 sanitary installations kit

Physical, chemical and

practice for on-site maintenance


biochemical methods. Application

and repair of industrial trucks


of inductively coupled plasma mass spectrometry (ICP-MS)

B/503 BS 6068-5.37:Biological methods. Determination

PAS 105:2007 Recovered paper sourcing and quality. Code of practice

supersedes PAS 105:2005 ISBN 0 580 45246 8 £0.00 members, £0.00 non-members

SPECIALIST BOOKS FROM BSI BIP 2047:2006 Winning with fire safety. A guide for

AMENDMENTS TO BRITISH STANDARDS

of acute toxicity of marine or estuarine sediment to amphipods

BS 848:Fans for general purposes

BS 7531:2006 Rubber bonded fibre jointing for

BS 848-2.2:-

industrial and aerospace purposes.

Methods of noise testing. Determination of fan sound power

Specification CORRIGENDUM 1 AMD 16859

levels under standardized

AMD 16859

PSE/2

laboratory conditions. Reverberant room method

BS 7858:2006

business


BS 4875:-

Security screening of individuals

Strength and stability of furniture

employed in a security environment. Code of practice CORRIGENDUM 1 AMD 16681 AMD 16681

BS 4875-7:2006 BIP 2089:2006

Domestic and contract storage

A guide to corporate social

furniture. Performance

responsibility

requirements CORRIGENDUM 1 AMD 16830


GW/3

BS 8468:Respiratory equipment for use

AMD 16830

FW/0

against chemical, biological, radiological and nuclear (CBRN) agents

BS 5499:BIP 2102:2006

Graphical symbols and signs.

Environment management report.

Safety signs, including fire safety

BS 8468-1:2006

Trends and best practice in waste

signs

Positive pressure, self-contained,

management


open-circuit breathing apparatus.

BS 5499-11:2002

Specification CORRIGENDUM 1 AMD 16807

Water safety signs

AMD 16807

PH/4

AMENDMENT 1 AMD 16783 AMD 16783

PH/8/2

KITS, SETS, PACKS AND SERIES

BS 8888:2006 Technical product specification

BS 6068:Water quality

(TPS). Specification CORRIGENDUM 1 AMD 16851 AMD 16851

TDW/4


Page 18 of 71

BS EN 26:1998

BS EN ISO 4126:-

Gas fired instantaneous water

Safety devices for protection

BS EN 13458:-

heaters for the production of

against excessive pressure

Cryogenic vessels. Static vacuum insulated vessels

domestic hot water, fitted with atmospheric burners AMENDMENT 3 AMD 16769

BS EN ISO 4126-1:2004

AMD 16769

GSE/29

Safety valves

BS EN 13458-2:2002

CORRIGENDUM 1 AMD 16817 AMD 16817

Design, fabrication, inspection and

PVE/12

testing CORRIGENDUM 1 AMD 16823 AMD 16823

BS EN 30:-

PVE/18

Domestic cooking appliances

BS EN ISO 4126-2:2003

burning gas

Bursting disc safety devices


BS EN 30-1-3:2003

BS EN 13530:-

PVE/12

Safety. Appliances having a glass

Cryogenic vessels. Large transportable vacuum insulated vessels

ceramic hotplate AMENDMENT 1 AMD 16803

BS EN 10028:-

AMD 16803

GSE/35

Flat products made of steels for

BS EN 13530-2:2002

pressure purposes

Design, fabrication, inspection and testing CORRIGENDUM 1 AMD 16816

BS EN 542:2003 BS EN 10028-2:2003

Adhesives. Determination of

AMD 16816

Non-alloy and alloy steels with

density CORRIGENDUM 1 AMD 16855

PVE/18

specified elevated temperature

AMD 16855

PRI/52

properties CORRIGENDUM 1 AMD 16824

BS EN 14041:2004

AMD 16824

ISE/73/2 BS EN 543:2003

Resilient, textile and laminate floor coverings. Essential characteristics CORRIGENDUM 2 AMD 16776 AMD 16776


BS EN 10028-4:2003

apparent density of powder and

PRI/60

Nickel alloy steels with specified

granule adhesives CORRIGENDUM 1 AMD 16856

low temperature properties CORRIGENDUM 1 AMD 16825

AMD 16856

PRI/52

BS EN 14125:2004

AMD 16825

ISE/73/2

pipework for underground installation at petrol filling stations AMENDMENT 1 AMD 16792

BS EN 1251:BS EN 12092:2001

Cryogenic vessels. Transportable

Thermoplastic and flexible metal

AMD 16792


vacuum insulated vessels of not

PVE/21

viscosity CORRIGENDUM 1 AMD 16854

more than 1000 litres volume

AMD 16854

BS EN 14398:-

PRI/52

BS EN 1251-2:2000

Cryogenic vessels. Large transportable non-vacuum

Design, fabrication, inspection and testing CORRIGENDUM 1 AMD 16822

insulated vessels

BS EN 13229:2001 Inset appliances including open

AMD 16822

PVE/18

fires fired by solid fuels. Requirements and test methods CORRIGENDUM 1 AMD 16546 AMD 16546

RHE/28


Page 19 of 71

BS EN 14398-2:2003

BS EN 60335-2-43:2003

BS EN 60684-3-212:2006

Design, fabrication, inspection and

Particular requirements for

Heat-shrinkable polyolefin

testing CORRIGENDUM 1 AMD 16821

appliances for clothes dryers and

sleevings CORRIGENDUM 1 AMD 16815

towel rails CORRIGENDUM 1 AMD 16827

AMD 16821

PVE/18

AMD 16815

AMD 16827

GEL/15/3/5 CPL/61/07

BS EN ISO 15605:2004

BS EN 60684-3-233:2006

Adhesives. Sampling

BS EN 60371:-

Heat-shrinkable fluoroelastomer

CORRIGENDUM 1 AMD 16857

Insulating materials based on mica

sleeving, flame retarded, fluid

AMD 16857

resistant, shrink ratio 2:1 CORRIGENDUM 1 AMD 16839

PRI/52

AMD 16839

BS EN 60371-3:-

GEL/15/3/5

Specifications for individual

BS EN ISO/IEC 17025:2005

materials

General requirements for the

BS EN 60998:-

competence of testing and calibration laboratories CORRIGENDUM 1 AMD 16767

BS EN 60371-3-2:2006

Connecting devices for low-voltage

AMD 16767

Mica paper

circuits for household and similar


purposes

CAS/1

GEL/15/3/11 BS EN 60998-2-3:2004

BS EN 60060:High voltage test techniques


BS EN 60371-3-5:2006

connecting devices as separate

Glass-backed mica paper with an

entities with insulation-piercing

epoxy resin binder for

BS EN 60060-3:2006

clamping units CORRIGENDUM 1 AMD 16841

post-impregnation (VPI) CORRIGENDUM 1 AMD 16813

Definitions and requirements for

AMD 16841

AMD 16813

on-site tests CORRIGENDUM 1 AMD 16784

PEL/23/2 GEL/15/3/11

AMD 16784

PEL/42

BS EN 61000:BS EN 60664:-


Insulation coordination for

BS EN 60068:-

(EMC)

equipment within low-voltage

Environmental testing

systems

BS EN 61000-4-4:2004 BS EN 60068-2-78:2002


BS EN 60664-4:2006

Test methods. Test Cab. Damp

techniques. Electrical fast

Consideration of high-frequency

heat, steady state CORRIGENDUM 1 AMD 15891

transient/burst immunity test CORRIGENDUM 1 AMD 16840

voltage stress CORRIGENDUM 1 AMD 16804

AMD 15891

GEL/104

BS EN 60335:Household and similar electrical

AMD 16840

AMD 16804

GEL/210/12 GEL/109 BS EN 61009:-

BS EN 60684:Flexible insulating sleeving

appliances. Safety

Residual current operated circuit-breakers with integral overcurrent protection for

BS EN 60684-3:Specifications for individual types

household and similar uses (RCBO's)

of sleeving


Page 20 of 71

BS EN 61009-1:2004

BS ISO 13628:-

BS ISO 19739:2004

General rules


Natural gas. Determination of


industries. Design and operation of

sulfur compounds using gas


chromatography AMENDMENT 1 AMD 16788

PEL/23/1

AMD 16788

PTI/15

BS ISO 13628-10:2005

BS EN 62040:-

Specification for bonded flexible

Uninterruptible power systems

pipe AMENDMENT 1 AMD 16775

(UPS)

CP 2010:Code of practice for pipelines

AMD 16775

PSE/17/-/4 BS EN 62040-2:2006 CP 2010-2:1970

Electromagnetic compatibility (EMC) requirements CORRIGENDUM 1 AMD 16838 AMD 16838

PEL/22

BS ISO 13679:2002

Design and construction of steel


pipelines in land AMENDMENT 1 AMD 16832

industries. Procedures for testing

AMD 16832

casing and tubing connections AMENDMENT 1 AMD 16774

PSE/17

AMD 16774

BS ISO 7540:2006

PSE/17

Ground paprika (Capsicum annuum L.). Specification CORRIGENDUM 1 AMD 16834

UPDATED BRITISH STANDARDS

DD ISO/TS 16489:2006

AMD 16834

AW/7

BS 5410:-

Water quality. Guidance for

Code of practice for oil firing

establishing the equivalency of results CORRIGENDUM 1 AMD 16787

BS ISO TR 10064:-

BS 5410-1:1997

AMD 16787

Code of inspection practice

EH/3/2

Installations up to 45 kW output capacity for space heating and hot

BS ISO TR 10064-2:1996 Inspection related to radial

BS ISO 16712:2005 (BS 6068-5.37:2005)

composite deviations, runout, tooth

Water quality. Determination of

thickness and backlash CORRIGENDUM 2 AMD 16771

acute toxicity of marine or

water supply purposes AMENDMENT 2


RHE/13

estuarine sediment to amphipods AMENDMENT 1 AMD 16801

AMD 16771

MCE/5

BS EN 1603:1997

AMD 16801

EH/3/5

Thermal insulating products for building applications.

BS ISO 13347:-

Determination of dimensional

Industrial fans. Determination of

BS ISO 17294:-

stability under constant normal

fan sound power levels under

Water quality. Application of

laboratory conditions

standardized laboratory conditions

inductively coupled plasma mass

(23$0DC/50% relative humidity) AMENDMENT 2

spectrometry (ICP-MS)

BS ISO 13347-2:2004 (BS 848-2.2:2004) Reverberant room method


B/540

BS ISO 17294-1:2004 (BS 6068-2.91:2004) General guidelines


MCE/17

AMENDMENT 1 AMD 16802 AMD 16802

EH/3/2

UPDATED BRITISH STANDARDS

Page 21 of 71

BS EN 1606:1997

BS EN 13041:2000

BS EN 60335-1:2002

Thermal insulating products for

Soil improvers and growing media.


building applications.

Determination of physical

AMENDMENT 4

Determination of compressive

properties. Dry bulk density, air

creep AMENDMENT 2

volume, water volume, shrinkage


CPL/61

value and total pore space AMENDMENT 1


B/540


BS EN 60371:-

AW/20

Insulating materials based on mica

BS EN 1609:1997 Thermal insulating products for

BS EN 50117:-


Coaxial cables

BS EN 60371-3:Specifications for individual materials

Determination of dimensional short term water absorption by partial

BS EN 50117-1:2002

immersion AMENDMENT 2


B/540

Generic specification

BS EN 60371-3-4:1996

AMENDMENT 1

Polyester film-backed mica paper


with a B-stage epoxy resin binder AMENDMENT 1

EPL/46


GEL/15/3/11

BS EN 12430:1998 BS EN 50216:-

Thermal insulating products for

Power transformer and reactor


BS EN 60371-3-6:1996

fittings

Determination of behaviour under point load AMENDMENT 1

Gloss-backed mica paper with a B-stage epoxy resin binder AMENDMENT 1

BS EN 50216-3:2002



Protective relay for hermetically

B/540

sealed liquid-immersed

GEL/15/3/11

transformers and reactors without gaseous cushion AMENDMENT 2

BS EN 12431:1998 Thermal insulating products for

PD CISPR/TR 16:-




PEL/14

Determination of thickness for

and immunity measuring apparatus and methods

floating floor insulating products AMENDMENT 1

BS EN 50216-5:2002


PD CISPR/TR 16-4-3:2004

Liquid level, pressure and flow

B/540

Uncertainties, statistics and limit

indicators, pressure relief devices

modelling. Statistical

and dehydrating breathers AMENDMENT 3

BS EN 12525:2000

considerations in the determination of EMC compliance of


Agricultural machinery. Front

PEL/14

loaders. Safety AMENDMENT 1

mass-produced products AMENDMENT 1



BS EN 60335:-

AGE/6

GEL/210/12

Household and similar electrical appliances. Safety

SPECIAL ANNOUNCEMENTS

SPECIAL ANNOUNCEMENTS

Page 22 of 71

BS MA 7

ISO/DIS 8873:-

BS 2853:1957

Specification for manholes with

Rigid cellular plastics.

Specification for the design and

bolted covers

Spray-applied polyurethane foam

testing of steel overhead runway

The withdrawal of this standard

for thermal insulation

beams

B/525/31

was announced in the December 2006 edition of Update Standards.

ISO/DIS 8873-2

A note of objection has since been

BS 4481:-

Application

received, and the committee have

Bonded abrasive products

This draft international standard

decided that its withdrawal should

has now been circulated by

be reviewed.

ISO/TC61/SC10, of which the UK

Contact: Caroline Langdon Email: [email protected]

BS 4481-2:1983

is currently an observer member

SME/32

Specification for dimensions of

since efforts within the industry are

grinding wheels and segments

more centralized within CEN.

MTE/13

However copies of the DIS are

ISO/FDIS 1138:2007

available from the Programme

Rubber compounding ingredients.

Manager until 27th March, 2007.

BS 4678:-

Contact: Alex Price Email: [email protected]

Cable trunking

Carbon black. Determination of sulfur content

PRI/72

This publication was originally an

BS 4678-2:1973

amendment (ISO

Steel underfloor (duct) trunking

1138:1981/Damd1), however after

ISO/DIS 8873-3

the DIS stage it was decided that it

Test methods

would be changed at FDIS stage to

This draft international standard

a full revision of the standard. The

has now been circulated by

BS 4678-4:1982

UK intend to adopt this revised


Specification for cable trunking

standard if it is now approved at


made of insulating material

the FDIS stage.


Contact: Charlotte Armstrong Email: [email protected]


PEL/213

PEL/213


PRI/50

BS 4999:-


General requirements for rotating

Manager until 27th March, 2007.

electrical machines


ISO/DIS 1922

PRI/72


BS 4999-140:1987

Determination of shear strength

Specification for voltage regulation

This draft international standard has now been circulated by

and parallel operation of A.C.


BRITISH STANDARDS PROPOSED FOR CONFIRMATION


BS 449:-


Specification for the use of

BS 5950:-


structural steel in building

Structural use of steelwork in


synchronous generators

PEL/2

building

available from the Programme Manager until 27th March, 2007.

BS 449-2:1969


Metric units

PRI/72

BS 5950-1:2000

B/525/31

Code of practice for design. Rolled and welded sections

B/525/31

BRITISH STANDARDS PROPOSED FOR CONFIRMATION

Page 23 of 71

BS 5950-5:1998

BS ISO 14152:2001

BS 3680-7:2000

Code of practice for design of cold

Neutron radiation protection

Specification of equipment for the

formed thin gauge sections

shielding. Design principles and

measurement of water level

B/525/31

CPI/113/5

considerations for the choice of appropriate materials

NCE/2 BS 5950-6:1995

BS 4359:-

Code of practice for design of light

Determination of the specific

gauge profiled steel sheeting

surface area of powders

B/525/31

BS 5950-9:1994 Code of practice for stressed skin

BRITISH STANDARDS REVIEWED AND CONFIRMED BS 2955:1993

BS 4359-2:1982

Glossary of terms relating to

Recommended air permeability methods

particle technology

design

LBI/37

LBI/37 B/525/31

BS ISO 8529:Reference neutron radiations

BS 3406:-

BS 4359-4:1995

Methods for determination of

Recommendations for methods of

particle size distribution

determination of metal surface area using gas adsorption techniques

BS ISO 8529-1:2001

BS 3406-1:1986

Characteristics and methods of

LBI/37

Guide to powder sampling

production

LBI/37 NCE/2

BS 4604:Specification for the use of high

BS ISO 11929:Determination of the detection limit

BS 3406-4:1993

strength friction grip bolts in

Guide to microscope and image

structural steelwork. Metric series

analysis methods

and decision threshold for ionizing

LBI/37

radiation measurements

BS 4604-1:1970 General grade

BS 3406-9:1997 BS ISO 11929-4:2001

Recommendations for the filter

Fundamentals and application to

blockage method (mesh

measurements by use of

obscuration)

B/521

BS 4604-2:1970

LBI/37

linear-scale analogue ratemeters,

Higher grade (parallel shank)

B/521

without the influence of sample treatment

NCE/2

BS 3625:1963 Specification for eyepiece and

BS 5531:1988

screen graticules for the

Code of practice for safety in

BS ISO 12006:-

determination of the particle size of

erecting structural frames

Building construction. Organization

powders

B/521 LBI/37

of information about construction works

BS 5950:BS 3680:-

Structural use of steelwork in

BS ISO 12006-2:2001

Measurement of liquid flow in open

building

Framework for classification of

channels

information

B/500

BRITISH STANDARDS REVIEWED AND CONFIRMED

Page 24 of 71

BS 5950-2:2001

BS 6043-2.4:2000

Specification for materials,

Analysis by X-ray fluorescence

fabrication and erection. Rolled

spectroscopy

BS 6043-3.1:Sampling

CII/24

and welded sections

B/521 BS 6043-3.1.1:1999 Sampling of cathodes

BS 6043-2.9:2000 BS 5950-3.1:1990

Determination of particle size

Design in composite construction.

distribution

CII/24 CII/24

Code of practice for design of

BS 6043-3.1.2:1999

simple and continuous composite

Sampling of anodes

beams

B/525/4

CII/24

BS 6043-2.10:1996 Determination of electrical resistivity of calcined coke

BS 5950-4:1994

BS 6043-3.3:2000

granules

CII/24

Code of practice for design of

Determination of the bulk density (apparent density) of cathode

composite slabs with profiled steel

blocks and prebaked anodes using

sheeting

B/525/4

BS 6043-2.11:1995

a dimensions method

CII/24

Determination of volatile matter content

CII/24

BS 6043:-

BS 6043-3.4:2000

Methods of sampling and test for

Determination of the open porosity

carbonaceous materials used in aluminium manufacture

BS 6043-2.13:1996

and bulk density (apparent density)

Determination of tapped bulk

of cathode blocks and prebaked

density of green and calcined coke

CII/24

BS 6043-1:-

anodes by a hydrostatic method

CII/24

Electrode pitch

BS 6043-1.10:2000

BS 6043-2-18:2001

BS 6043-3.5.1:2000

Determination of total sulfur by the

Determination of flexural strength.

Eschka method

Determination of volatile matter

CII/24

content

Three point method

CII/24

CII/24

BS 6043-1.11:2000

BS 6043-2.20:-

BS 6043-3.6:2000

Carboxy reactivity of calcined coke

Determination of electrical resistivity of cathode blocks and

Determination of the atomic C/H ratio of the quinoline-insoluble

prebaked anodes at ambient

BS 6043-2.20.1:2001

material

CII/24

temperature

Determination of the reactivity by a

CII/24

loss in mass method

CII/24 BS 6043-3.8.1:2001

BS 6043-1.13:2000 Determination of sulfur content

CII/24

Carboxy reactivity of prebaked

BS 6043-2.21.1:2001

anodes. Determination of the

Determination of the reactivity by

reactivity by a loss in mass method

determination of ignition

BS 6043-2:-

CII/24

temperature

CII/24

Electrode coke

BS 6043-3:Electrodes


Page 25 of 71

BS 6043-3.9.1:2002

BS 6920-2.2.3:2000

BS 7591-4:1993

Chemical reactivity to air of

Method of testing odours and

Method of evaluation by liquid

prebaked anodes. Determination of

flavours imparted to water by

expulsion

the reactivity by a loss in mass

hoses for conveying water for food

method

LBI/37

and drink preparation

CII/24

EH/6 BS 7843:Guide to the acquisition and

BS 6043-4.1:2000

BS 6920-2.3:2000

Cold ramming pastes. Methods of

Appearance of water

management of meteorological precipitation data

EH/6

sampling

CII/24 BS 7843-3.1:1999 BS 6920-2.4:2000

Specification for raingauges.

BS 6161:-

Growth of aquatic micro-organisms

Storage raingauges

Methods of test for anodic

test

CPI/113 EH/6

oxidation coatings on aluminium and its alloys

BS 7898:1997 BS 6920-3:2000

Guide to hydrometric data

High temperature tests

BS 6161-18:1991

EH/6

Determination of surface abrasion

management

CPI/113

resistance

STI/32

BS 7022:1988

BS ISO 9083:2001

Guide for geophysical logging of

Calculation of load capacity of spur

BS 6920:-

boreholes for hydrogeological

and helical gears. Application to

Suitability of non-metallic products

purposes

CPI/113

for use in contact with water

marine gears

MCE/5

intended for human consumption with regard to their effect on the quality of the water

BS 7405:1991

BS ISO 10300:-

Guide to selection and application

Calculation of load capacity of

of flowmeters for the measurement

bevel gears

of fluid flow in closed conduits

BS 6920-2:-

CPI/30

Methods of test

BS ISO 10300-1:2001 Introduction and general influence

BS 7591:-

BS 6920-2.2:-

factors

Porosity and pore size distribution

Odour and flavour of water

MCE/5

of materials

BS ISO 10300-2:2001

BS 6920-2.2.2:2000 Method of testing odours and flavours imparted to water by

BS 7591-1:1992

Calculation of surface durability

Method of evaluation by mercury

(pitting)

MCE/5

porosimetry

hoses and composite pipes and

LBI/37

tubes

EH/6

BS ISO 10300-3:2001 BS 7591-2:1992

Calculation of tooth root strength

MCE/5

Method of evaluation by gas adsorption

LBI/37


Page 26 of 71

BS ISO 14606:2000

BS 7568-27:1993

BS 2011-2.1Ca:1977

Surface chemical analysis. Sputter

Guide pillars. Type B, end-locking

Damp heat, steady state

depth profiling. Optimization using

pillars

GEL/104 MTE/12

layered systems as reference materials

BS 2011-2.1Cb:1990

CII/60

BS ISO 14706:2000

BS 7568-28:1993

Damp heat, steady state, primarily

Guide pillars. Type C, pillars with

for equipment

GEL/104

taper lead and bush

MTE/12

Surface chemical analysis. Determination of surface elemental

BS 2782:-

contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy

CII/60

BS 7568-29:1993

Methods of testing plastics.

Guide pillars. Type D, end-locking

Chemical properties

pillars with flange

MTE/12 BS 2782-4:Method 454D:1978 Determination of volatile matter

BS C 15:1960 Specification for coupling

(including water) of PVC resins

BRITISH STANDARDS WITHDRAWN

dimensions for aircraft-to-tractor tow bar connections

ACE/57

PRI/21

BS 684:Methods of analysis of fats and

BS 3970:-

fatty oils

Sterilizing and disinfecting equipment for medical products

BRITISH STANDARDS DECLARED OBSOLESCENT

BS 684-2.25:1997

BS 7044:-

Other methods. Determination of

BS 3970-6:1993

Artificial sports surfaces

oxidative stability (accelerated

Specification for sterilizers using low-temperature steam with

oxidation test)

AW/307

formaldehyde

LBI/35

BS 7044-4:1991 Specification for surfaces for

BS 770:-

multi-sports use

PRI/57

Methods for chemical analysis of

BS 4147:1980

cheese

Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

BS 770-11:1997

BS 7568:-

acidifiers/pH-controlling agents in

Press tools

processed cheese and processed

suitable primers where required

Calculation of the content of added

ISE/16

citrate emulsifying agents and

BS 5350:Methods of test for adhesives

cheese products

AW/5 BS 7568-25:1993

BS 5350-B1:1978

Guide pillars. Types

MTE/12

BS 2011:-

Determination of density

PRI/52

Basic environmental testing procedures

BS 7568-26:1993

BS 5350-B8:1990

Guide pillars. Type A, straight

BS 2011-2.1:-

pillars

MTE/12


Tests

Determination of viscosity

PRI/52

Page 27 of 71

BS 5350-E2:1979 Guide to sampling

PRI/52

BS 6444-1:1990

BS 7777-2:1993

Methods of test for heart valve

Specification for the design and

substitutes and requirements for

construction of single, double and

their packaging and labelling

full containment metal tanks for the

CH/150/2 BS 5524:-

storage of liquefied gas at temperatures down to -165$0DC

Gas-insulated metal-enclosed

PVE/15

switchgear for rated voltages of

BS 7087:-

72.5 kV and above

Herbs and spices ready for food

BS 7777-3:1993

use

Recommendations for the design

BS 5763:Methods for microbiological

BS 7087-11:1996

examination of food and animal

Specification for ground paprika

and construction of prestressed and reinforced concrete tanks and

AW/7

feeding stuffs

tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings

BS 7208:-

BS 5763-3:1991

PVE/15

Contact lenses

Enumeration of coliforms. Most probable number technique

AW/9

BS EN 725:-

BS 7208-9:-


Optics and optical instruments.

BS 5947:1992

Determination of strains for rigid

Method of test for static loading of

contact lenses

Methods of test for ceramic powders

protective cabs and frames for agricultural wheeled tractors,

BS EN 725-6:1996

BS 7690:1993

including acceptance conditions

AGE/6

Determination of the specific

Test methods for induction channel

surface area

furnaces

RPI/13

PEL/27 BS 6331:Mounting dimensions of single rod

BS EN 725-7:1996

BS 7691:1994

double acting hydraulic cylinders

Determination of the absolute

Methods for testing resistance to

density

environmental conditions of

BS 6331-4:1985

electronic equipment used in

Specification for 63 bar series,

agriculture and horticulture

RPI/13

AGE/6

including associated components

MCE/18

BS EN 873:1997 Light conveyor belts. Principal characteristics and applications

BS 7777:BS 6413:-

Flat-bottomed, vertical, cylindrical


storage tanks for low temperature

related products (class L)

service

PRI/67

BS EN 971:Paints and varnishes. Terms and

BS 6413-5:1988

definitions for coating materials

BS 7777-1:1993

Classification for family T (turbines)

Guide to the general provisions

PTI/7

applying for design, construction,

BS EN 971-1:1996 General terms

installation and operation

PVE/15 BS 6444:-

STI/11

Cardiovascular implants


Page 28 of 71

BS EN 1637:1999

BS EN ISO 21269:2004

DD ENV 61112:2002

Light conveyor belts. Test methods

Hexagon socket head cap screws

Blankets of insulating material for

for the measurement of the

with metric fine pitch thread

electrical purposes

FME/9/3

electrical resistances

PEL/78

PRI/67 BS EN 29333:1992

BS EN 61300:-

BS EN 1718:1999

Specification for dental brazing

Fibre optic interconnecting devices

Light conveyor belts. Test method

materials

and passive components. Basic

CH/106/2

for the measurement of the

test and measurement procedures

electrostatic field generated by a running light conveyor belt

PRI/67

BS EN 60298:1996

BS EN 61300-2:-

A.C. metal-enclosed switchgear

Tests

and controlgear for rated voltages

BS EN 1722:1999

above 1 kV and up to and including


52 kV

BS EN 61300-2-3:1997

PEL/17/1

for the determination of the

Static shear load

GEL/86/2

maximum tensile strength

PRI/67 BS EN 60517:1997 (BS 5524:1992)

BS EN 61300-2-20:1997

BS EN 1723:2000

Gas-insulated metal-enclosed

Climatic sequence

Light conveyor belts. Method of

switchgear for rated voltages of

test for the determination of the

72.5 kV and above

GEL/86/2 PEL/17/1

relaxed elastic modulus

BS EN 61300-2-31:1997

PRI/67

Nuclear radiation

GEL/86

BS EN 60646:1999 BS EN 1724:1999

Test methods for crucible induction


furnaces

PEL/27

for the determination of the

BS ISO/IEC 13250:2000 Information technology. SGML

coefficient of friction

PRI/67

applications. Topic maps

IST/41

BS EN 60947:Specification for low-voltage switchgear and controlgear

BS EN ISO 9340:1999 (BS 7208-9:1999)

BS ISO/IEC 14496:Information technology. Coding of

Optics and optical instruments.

audio-visual objects

BS EN 60947-5-1:1998

Contact lenses. Determination of

Control circuit devices and

strains for rigid contact lenses

MCE/18

switching elements.

BS ISO/IEC 14496-16:2004

Electromechanical control circuit

Animation framework extension

devices

BS EN 12006:-

PEL/17/2

(AFX)

IST/37

Non-active surgical implants. Particular requirements for cardiac

DD ENV 61111:2002

and vascular implants

BS IEC 60050:-

Matting of insulating material for

International electrotechnical

electrical purposes

PEL/78

BS EN 12006-1:1999

vocabulary

Heart valve substitutes

CH/150/2

BS IEC 60050-351:1998 Automatic control

GEL/1


Page 29 of 71

BS 2975:-

BS 7273-3 (Revision)

PD 6534:1993

Sampling and analysis of glass

Electrical actuation of pre-action

Guide to the use in the UK of DD

making sands

water mist and sprinkler systems

will supersede BS 7273-3:2000

ENV 206:1992. Concrete.

FSH/12/4

Performance, production, placing

BS 2975-2

and compliance criteria

B/517/1

Methods for chemical analysis

will partially supersede BS 2975:1988 LBI/36/5

BS 7273-5 Electrical actuation of water mist systems

BRITISH STANDARDS UNDER REVIEW

FSH/12/4 BS 3108:-

BS 4607:-

Sampling and analysis of glass

Non-metallic conduits and fittings

making limestone and dolomite

BS 7858:2006/Amendment 1 Security screening of individuals

for electrical installations

employed in a security

BS 3108-1 (Revision) BS 4607-5:1982

Specification, methods for

Specification for rigid conduits,

sampling and physical testing

environment. Code of practice

GW/3

will supersede BS 3108:1980

fittings and components of

LBI/36/1

insulating material

BS 9004 Gas meter box. Specification

PEL/213

GSE/25 BS 3108-2 (Revision) Methods for chemical analysis

BS EN 1369:1997

DD XXXX


Founding. Magnetic particle

LBI/36/1

inspection

equipment rated for use by children

ISE/NFE/9

and young people in educational

BS 5335:-

establishments

Specification for quilts

BS EN 1370:1997

Safety requirements for electrical

EPL/66

Founding. Surface roughness inspection by visual tactile

BS 5335-1:1991/Amendment 1

comparators

Quilts with fillings other than

ISE/NFE/9

BS EN 40:Lighting columns

feather and or down

TCI/66 BS EN 40-3-3 (Revision)

BS EN 1754:1997 Magnesium and magnesium alloys.

BS 5444 (Revision)

Magnesium and magnesium alloy

Recommendations for preparation

anodes, ingots and castings.

of copy for microcopying

Design and verification. Verification by calculation

will supersede BS EN 40-3-3:2003 B/509/50


Designation system

IDT/1

NFE/35

BS EN 338 (Revision) BS EN ISO 4516:2002

BS 6105:-

Metallic and other inorganic

Blanks for superabrasive

coatings. Vickers and Knoop

cutting-off wheels

microhardness tests

will supersede BS EN 338:2003 B/518

BS EN 384 (Revision)

STI/33

NEW WORK STARTED

Structural timber. Strength classes

BS 7273:-

Structural timber. Determination of

Code of practice for the operation

characteristic values of mechanical

of fire protection measures

properties and density


NEW WORK STARTED

Page 30 of 71


BS EN 3155:-

BS EN 12737:2004/Amendment 1

Timber structures. Structural

Aerospace series. Electrical

Precast concrete products. Floor

timber and glued laminated timber.

contacts used in elements of

slats for livestock

Determination of some physical

connection

B/524

and mechanical properties


BS EN 3155-005:2006/Corrigendum



Child use and care articles. Reclined cradles

crimp, class T. Product standard

BS EN 543:2003/Corrigendum

ACE/6/-/3

will supersede BS EN 12790:2002 CW/41

Adhesives. Determination of apparent density of powder and

BS EN 4496:2005/Corrigendum

granule adhesives

PRI/52

BS EN 13203:-

Aerospace series. Screws, 100$0D

Solar supported gas-fired domestic

countersunk normal head, offset

appliances producing hot water.

cruciform recess, close tolerance

BS EN ISO 661:2005/Corrigendum

Appliances not exceeding 70kW

normal shank, short thread, in

Animal and vegetable fats and oils.

heat input and 500 litres water

titanium alloy, anodized, with

Preparation of test sample

AW/307

storage capacity

aluminium pigmented coating. Classification: 1 100MPa (at ambient temperature) / 315$0DC

ACE/12

DD CEN/TS 1187 (Revision) Test methods for external fire

BS EN 13203-3 Assessment of energy consumption

exposure to roofs

will supersede DD ENV 1187:2002 FSH/22/8

GSE/29

BS EN ISO 10993:Biological evaluation of medical devices

BS EN 13225 Precast concrete products. Linear


structural elements

BS EN ISO 10993-5 (Revision)

Timber structures. Glued laminated

B/524

Tests for in vitro cytotoxicity

timber. Strength classes and

will supersede BS EN ISO 10993-5:1999

determination of characteristic values

CH/194

will supersede BS EN 1194:1999

BS EN 13353 (Revision) Solid wood panels (SWP).

B/518

Requirements

will supersede BS EN 13353:2003

BS EN 12369:-

B/541

Wood-based panels. Characteristic


values for structural design

Timber structures. Test methods.


Withdrawal capacity of timber fasteners


BS EN 12369-3

Solid wood panels. Bonding

Solid-wood panels

quality. Test method

B/541

will supersede DD CEN/TS 13354:2003 B/541



Timber structures. Test methods. Pull through resistance of timber fasteners



BS EN 13369

Wrought and cast materials.

Common rules for precast concrete

Special requirements for materials

products

intended for pressure purposes

B/524

will supersede BS EN 12392:2000 NFE/35

NEW WORK STARTED

Page 31 of 71

BS EN 13566:-


BS EN ISO 21809:-

Plastics piping systems for

Timber structures. Product


renovation of underground

requirements for prefabricated

industries. External coatings for

non-pressure drainage and

structural members assembled

buried and submerged pipelines

sewerage networks

with punched metal plate fasteners

used in pipeline transportation


systems

BS EN 13566-3:2002/Amendment 1 Lining with close-fit pipes

PRI/88/3

BS EN ISO 21809-5

BS EN 14354

External concrete coatings

Wood-based panels. Wood veneer

PSE/17/2

floor covering

B/541

BS EN ISO 13628:-

BS EN ISO 23251 (Revision)

Petroleum and natural gas industries. Design and operation of

Petroleum, petrochemical and

BS EN 14647


natural gas industries.

Calcium aluminate cement.

Pressure-relieving and

composition, specification and

depressuring systems

conformity criteria

BS EN ISO 13628-1:2005/Amendment 1

B/516/6

will supersede BS ISO 23251:2006 PSE/17/-/6

General requirements and recommendations

PSE/17/-/4

BS EN 13747

BS EN 14648

BS EN 50122:-

Building hardware. Fittings for

Railway applications. Fixed

shutters. Requirements and test

installations. Electrical safety,

methods

B/538

Precast concrete products. Floor

earthing and bonding

plates for floor systems

B/524

BS EN 50122-1 (Revision)

BS EN 14651:2005/Amendment 1

Protective provisions relating to

Test method for metallic fibered

BS EN ISO 13855

concrete. Measuring the flexural

Safety of machinery. The

tensile strength (limit or

positioning of protective equipment

proportionality (LOP), residual)

electrical safety and earthing

will supersede BS EN 50122-1:1998 GEL/9/3 B/524

in respect of approach speeds of

BS EN 60352:-

parts of the human body

Solderless connections

will supersede BS EN 999:1999 MCE/3

BS EN 14721:2005/Amendment 1 Test method for metallic fibre

BS EN 14175:Fume cupboards

concrete. Measuring the fibre

BS EN 60352-8

content in fresh and hardened

Compression mount connections. General requirements, test

concrete

B/524

methods and practical guidance

EPL/48

BS EN 14175-1 Vocabulary

DD CEN/TS 15643:-

LBI/18

BS EN 14175-2

Sustainability of construction

BS EN 60512:-

works. Framework for assessment

Connectors for electronic

of integrated building performance

equipment. Tests and measurements

Safety and performance requirements

LBI/18

DD CEN/TS 15643-1 Environmental, health and comfort and life cycle cost performances

B/558

NEW WORK STARTED

Page 32 of 71

BS EN 60512-9-3:2006/Corrigendum

BS EN 61892-7

Endurance tests. Test 9c:


Hazardous areas

Mechanical operation

General information and test

(engaging/separating) with

conditions. Measurement method

will supersede BS IEC 61892-7:1997 JPEL/18

of complex relative permittivity for

electrical load

EPL/48

dielectric resonator materials at

BS EN 62431

millimetre-wave frequency

EPL/49

Measurement methods for

BS EN 60512-12:-

reflectivity of electromagnetic wave

Soldering tests

absorbers in millimetre wave

BS EN 61391:-

frequency

Ultrasonics. Pulse echo scanners

will supersede DD IEC/PAS 62431:2005


EPL/46/2

Test 12b: Solderability, wetting,

BS EN 61391-2

soldering iron method

EPL/48

Techniques for measurement of

BS EN ISO XXXXX

maximum depth of visualization

Performance testing of safety

and d the displayed dynamic range

EPL/87 BS EN 60512-12-3:2006/Corrigendum Test 12c: Solderability, de-wetting

devices against excessive pressure

PVE/12 EPL/48

BS EN 61557:Electrical safety in low voltage

BS EN 00124095

distribution systems up to 1000 V


A.C. and 1500 V D.C. Equipment


Torsional strength and resistance

for testing, measuring or

to driving of screws

monitoring of protective measures

Test 12d: Resistance to soldering

B/518

heat, solder bath method

EPL/48


BS EN 61557-11

BS EN 00124096

Effectiveness of residual current


monitors (RCMs) type A and type

Withdrawal capacity of punched

B in TT, TN and IT systems

Test 12e: Resistance to soldering

PEL/85

metal plate fasteners

B/518

heat, soldering iron method

EPL/48

BS EN 60601:Medical electrical equipment

BS EN 61892:-

BS ISO 1922

Mobile and fixed offshore units.

Rigid cellular plastic. Determination

Electrical installations

of shear strength

PRI/72 BS EN 61892-3

BS EN 60601-1-8 General requirements for safety. Collateral standard. General

Equipment

BS ISO 4378:-


Plain bearings. Terms, definitions,

BS EN 61892-6

BS ISO 4378-1

requirements, tests and guidance for alarm systems in medical electrical equipment and medical

Installation

electrical systems

CH/62/1


classification and symbols

Design, bearing materials and their properties

MCE/12

BS EN 61338:Waveguide type dielectric resonators

NEW WORK STARTED

Page 33 of 71

BS ISO 4378-2

BS ISO 8611-1

Friction and wear

Test methods

MCE/12

BS ISO/IEC 18004:Information technology.

PKW/0

Radio-frequency identification for item management

BS ISO 4378-3

DD ISO/TS 8611-2

Lubrication

Performance requirements and

MCE/12

BS ISO/IEC 18004-4 (Revision)

selection of tests for flat pallets

PKW/0

communications at 2, 45 GHz

will supersede BS ISO/IEC 18004:2000

BS ISO 4869:Acoustics. Hearing protectors

Parameters for air interface

DD ISO/TS 8611-3

IST/34

Maximum working load

PKW/0 BS ISO 4869-2:1995/Corrigendum

BS ISO 18549:-

Estimation of effective A-weighted

Metallic powders. Determination of

sound pressure levels when

BS ISO XXXX

apparent density and flow rate at

hearing protectors are worn

Determination of the emission of

elevated temperatures

PH/7

semi-volatile organic compounds for building products. Micro

BS ISO 18549-1

chamber method

BS ISO 6104:2005/Corrigendum

EH/2/3

Superabrasive products. Rotating

Determination of apparent density at elevated temperatures

grinding tools with diamond or

ISE/65

cubic boron nitride. General

DD ISO/TS 12032

survey, designation and

Document imaging. Statistical

multilingual nomenclature

sampling for document images

BS ISO/IEC 20000:-

IDT/1/2

MTE/13

Information technology. Service management

BS ISO 12776

BS ISO 6105-1:2004/Corrigendum

Pallets. Slip sheets

Manually guided cutting-off in

BS ISO/IEC 20000-3

PKW/0

building and civil engineering

MTE/13

Guide on compliance with ISO/IEC 20000-1

IST/15/-/8

BS ISO 14717 BS ISO 6105-2:2004/Corrigendum

Oil of origanum, Spanish type

Hand-held cutting-off in building

[Coridothymus capitatus (L.) Rchb.

BS ISO 21549:-

f. syn.thymus capitatus (L.)

Health informatics: patient

and civil engineering

MTE/13

Haffmanns. & Link]

AW/54 BS ISO 7590

BS ISO 21549-8

Steel cord conveyor belts. Methods

BS EN ISO 14890:2003/Corrigendum

for the determination of total

Conveyor belts. Specification for

thickness and cover thickness

rubber or plastics covered

PRI/67

Links

IST/35

conveyor belts of textile

BS ISO 22006

construction for general use

PRI/67 BS ISO 8611:-

Quality management systems. Guidelines for the application of

Pallets for materials handling. Flat pallets

healthcard data

ISO 9001:2000 in crop production

BS ISO 16345

AW/90

Cooling towers. Testing and rating for performance

RHE/17

NEW WORK STARTED

Page 34 of 71

BS ISO 22178

BS IEC 60919:-

06/30058730 DC

Intelligent transport systems. Low

Performance of high-voltage D.C.

ISO 12651 Electronic imaging.

speed following systems.

(HVDC) systems

Vocabulary

IDT/1/3

Performance requirements and test procedures

EPL/278

BS IEC 60919-2 06/30111445 DC

Faults and switching

PEL/22 BS ISO 26910:-

BS ISO 369 Machine tools. Symbols for indications appearing

Springs. Shot peening

on machine tools

DD IEC/TS 62239 (Revision)

MTE/1

Process management for avionics.

BS ISO 26910-1

Preparation of an electronic

General procedures

components management plan

06/30112041 DC

will supersede DD IEC/TS 62239:2003 GEL/107

EN ISO 9241-304 Ergonomics of

GME/15

human-system interaction. Part 304. User performance test

BS ISO 27547:Plastics. Preparation of test

PD CEN/TR 14383:-

specimens of thermoplastic

Prevention of urban planning by

materials using mouldless

urban planning and building design

methods

PH/9

06/30117301 DC

technologies

ISO 16754 Earth-moving

PD CEN/TR 14383-2

machinery. Determination of

Urban planning

BS ISO 27547-1

will supersede DD ENV 14383-2:2003 B/562

General principles, and laser-sintering of specimens

ground contact pressure. Crawler machines

B/513/1

PRI/82 PD ISO/TR 28118

06/30125306 DC

Information and documentation.

BS ISO TS 28479

EN 15609 LPG equipment and

Performance indicators for national

Crop protection equipment.

accessories. LPG propulsion

libraries

Substitute materials for testing

IDT/2/15

AGE/15

systems for boats, yachts and other craft. Installation requirements

PVE/19

PD IEC/TR IEC 61946

BS ISO 28981

Mineral insulating oils.

Mopeds. Methods for setting the

Characterisation of the paraffinic /

running resistance on a chassis

06/30126364 DC

naphthenic nature by low

dynamometer

AUE/14

IEC 80000-14 Quantities and units.

temperature differential scanning

Part 14. Telebiometrics related to

calorimetry. Test method

GEL/10

human physiology

SS/7

DD IEC/TS 60479:Effects of current on human beings

PAS 911

and livestock

06/30128759 DC

Fire strategies for businesses.

BS ISO 15086-3 Hydraulic fluid

Guidance and framework for their

power. Determination of the

formulation

DD IEC/TS 60479-1:2005/Corrigendum General aspects

ZZ/1

fluid-borne noise characteristics of components and systems. Part 3. Measurement of hydraulic

JPEL/64

impedance

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT


MCE/18/-/8

Page 35 of 71

06/30133574 DC

06/30141790 DC

06/30146511 DC

BS 5979 Code of practice for

BS ISO 10245-1 Cranes. Limiting

BS ISO 18113-1 Clinical laboratory

remote centres receiving signals

and indicating devices. Part 1.

testing and in vitro diagnostic

from security systems

General

GW/1/11

medical systems. Information

MHE/3

supplied by the manufacturer (labelling). Part 1. Terms,

06/30135901 DC

06/30144982 DC

ISO 14132-5 Optics and photonics.

EN 1301-1 Aluminium and

Vocabulary for telescopic systems.

aluminium alloys. Drawn wire. Part

Part 5. Terms for night vision

1. Technical conditions for

systems

definitions and general requirements

CH/212

06/30146515 DC

inspection and delivery

CPW/172

NFE/35

BS ISO 18113-2 Clinical laboratory testing and in vitro diagnostic

06/30137137 DC

06/30144985 DC

ISO 11992-3 AMD1 Road vehicles.


Interchange of digital information


on electrical connections between

2. Mechanical properties

medical systems. Information supplied by the manufacturer (labelling). Part 2. In vitro diagnostic reagents for

NFE/35

towing and towed vehicles. Part 3.

professional use

CH/212

Application layer for equipment other than brakes and running gear

AUE/16

06/30144988 DC

06/30146518 DC




06/30137313 DC


3. Tolerances on dimensions

NFE/35

ISO/IEC 81060-1 Non-invasive

medical systems. Information supplied by the manufacturer

sphygmomanometers. Part 1.

(labelling). Part 3. In vitro

Requirements and test methods for mechanical type

CH/62/4

06/30145817 DC

diagnostic instruments for

BS ISO 23499 Coal. Determination

professional use

CH/212

of bulk density

PTI/16 06/30138756 DC

06/30146522 DC

ISO 12620 Terminology and other content and language resources. Data categories. Specification of data categories and management of a data category registry for

06/30145835 DC


BS ISO 10329 Coal. Determination


of plastic properties.

medical systems. Information

Constant-torque Giessler

supplied by the manufacturer (labelling). Part 4. In vitro

plastometer method

language resources

PTI/16

TS/1

diagnostic reagents for self-testing

CH/212 06/30146339 DC

06/30139418 DC EN 15602 Security service providers. Terminology

GW/3

ISO 16000-16 Indoor air. Part 16.

06/30146526 DC

Detection and enumeration of

BS ISO 18113-5 Clinical laboratory testing and in vitro diagnostic

moulds. Sampling by filtration

EH/2/3

medical systems. Information supplied by the manufacturer

06/30141785 DC

(labelling). Part 5. In vitro

06/30146347 DC

ISO 4918 Resilient, textile and

diagnostic instruments for

ISO 16000-17 Indoor air. Part 17.

laminate floor coverings. Castor

self-testing

Detection and enumeration of

chair test

PRI/60

CH/212

moulds. Culture-based method


EH/2/3

Page 36 of 71

06/30147281 DC

06/30151657 DC

06/30155256 DC

BS 7499 Static site guarding and

BS EN ISO 3452-5 Non-destructive

BS ISO 2597-2 Iron ores.

mobile patrol services. Code of

testing. Penetrant testing. Part 5.

Determination of total iron content.

Penetrant testing at temperatures

Part 2. Titrimetric methods after

practice

GW/3

higher than 50$0DC

titanium (III) chloride reduction

WEE/46

ISE/58

06/30148066 DC BS 8487 Design and construction

06/30151661 DC

06/30157290 DC

of gas boosters used in association

BS EN ISO 3452-6 Non-destructive

BS ISO 28003 Security

with combustion equipment.

testing. Penetrant testing. Part 6.

management systems for the

Penetrant testing at temperatures

supply chain. Requirements for

Specification

GSE/33

lower than 10$0DC

bodies providing audit and

WEE/46

certification of supply chain security management systems

06/30148102 DC

SME/32

ISO/IEC 15420 Information

06/30151815 DC

technology. Automatic identification

BS ISO 898-1 Mechanical

and data capture techniques.

properties of fasteners made of

06/30157587 DC

EAN/UPC bar code symbology

carbon steel and alloy steel. Part 1.

BS ISO 28300 Petroleum,

specification

Bolts, screws and studs

IST/34

petrochemical and natural gas

FME/9/1

industries. Venting of atmospheric and low-pressure storage tanks

PSE/17/-/6 06/30148192 DC

06/30151927 DC

BS EN 61169-4:2007

BS ISO 14744-1 REV Welding.

Radio-frequency connectors. Part

Acceptance inspection of electron

06/30157864 DC

4. R.F. coaxial connectors with

beam welding machines. Part 1.

BS EN 60947-5-1/prA2

inner diameter of outer conductor

Principles and acceptance

Low-voltage switchgear and

16 mm (0.63 in) with screw lock.

conditions

controlgear. Part 5-1. Control

WEE/-/1

Characteristic impedance 50 ohms (Type 7-16)

circuit devices and switching elements. Electromechanical

EPL/46/2

control circuit devices

06/30153386 DC

PEL/17/2

BS ISO 6752 Tools for pressing.

06/30151143 DC

Round punches with 60° conical

BS ISO 10245-3 Cranes. Limiting

head and straight shank

06/30158008 DC

MTE/12

and indicating devices. Part 3. Tower cranes

BS EN 3373-014 Aerospace series. Terminal lugs and in-line

MHE/3/5

splices for crimping on electric

06/30153680 DC

conductors. Part 014. In-line

BS ISO 27107 Animal and

06/30151146 DC

vegetable fats and oils.

BS ISO 11660-3 Cranes. Access,

Determination of peroxide value.

guards and restraints. Part 3.

Potentiometric end-point

Tower cranes

determination

MHE/3

splices, insulated and sealed, for crimping on copper conductors, temperature up to 200°C. Product standard

ACE/6/-/8

AW/307

06/30151267 DC

06/30154066 DC

BS ISO CD 10840 Plastics.

BS ISO/IEC 15457-1 Identification

Guidance for the use of standard

cards. Thin flexible cards. Part 1.

fire tests

Physical characteristics

PRI/26


06/30158501 DC BS ISO 11660-1 Cranes. Access, guards and restraints. Part 1. General

IST/17

MHE/3

Page 37 of 71

06/30158613 DC

06/30159143 DC

06/30159347 DC

BS EN 15607 Foodstuffs.

BS EN 15608 Surface active

BS EN 62148-11 Fibre optic active

Determination of d-biotin by HPLC

agents. Quantitative determination

components and devices. Package

of free fatty acid in

and interface standards. Part 11.

alkylamidopropylbetaines.

14-pin pump lasers and

AW/-/3

Gas-chromatographic method

06/30158810 DC

modulator-integrated laser

CII/34

BS EN 1474-2 Installation and

transmitters

GEL/86/3

equipment for liquefied natural gas. Design and testing of marine

06/30159238 DC

transfer systems. Part 2. Design

BS EN 61549/prA2 Miscellaneous

and testing of transfer hoses

06/30159355 DC

lamps

FSH/18/3

BS EN 61753-085-2 Fibre optic

CPL/34/1

interconnecting devices and passive components performance

06/30158813 DC

06/30159274 DC

BS EN 1474-3 Installation and

BS EN 80601-2-30 Medical

equipment for liquefied natural gas.

electrical equipment. Part 2-30.

Design and testing of marine

Particular requirements for basic

transfer systems. Part 3. Offshore

safety and essential performance

transfer systems

standard. Part 085-2. Non-connectorised single-mode pigtailed CWDM devices for category C-controlled environment

GEL/86/2

of automated type non-invasive

FSH/18/3

06/30159359 DC

sphygmomanometers

CH/62/4

BS EN 60255-22-1 Measuring relays and protection equipment.

06/30158897 DC BS EN 15606 Foodstuffs.

06/30159293 DC

Determination of acesulfame-K,

BS EN 15597-1 Winter

aspartame,

maintenance equipment.

neohesperidinedihydrochalcone

Spreading machines (gritting

and saccharin. High performance

machines). Part 1. Requirements

liquid chromatographic method

Part 22-1. Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests

PEL/95

on dosage and on static test on

AW/-/3

06/30159382 DC

dosage

B/513

BS ISO 16484-5 Building automation and control systems.

06/30158977 DC BS EN 1124-3 Pipes and fittings of

06/30159311 DC

longitudinally welded stainless


steel pipes with spigot and socket

interconnecting devices and

for waste water systems. Part 3.

passive components. Basic test

System X. Dimensions

Part 5. Data communication protocol £40.00 members, £80.00 non-members

RHE/2

and measurement procedures.

ISE/8

Part 3-13. Examinations and

06/30159392 DC

measurements. Control stability of

BS EN 1506 Ventilation for

a fibre optic switch

06/30159042 DC

GEL/86/2

BS EN 14349 Chemical

buildings. Sheet metal air ducts and fittings with circular

disinfectants and antiseptics.

cross-section. Dimensions

Quantitative surface test for the

06/30159323 DC

evaluation of bactericidal activity of


chemical disinfectants and

interconnecting devices and

antiseptics used in veterinary area

passive components. Basic test

on non-porous surfaces without

and measurement procedures.

mechanical action. Test method

Part 3-9. Examinations and

and requirements (phase 2, step 2)

RHE/2

measurements. Crosstalk

CH/216


GEL/86/2

Page 38 of 71

06/30159403 DC

06/30159551 DC

06/30159746 DC

BS EN 60450/prA1 Measurement

BS EN ISO 21068-3 Chemical

BS EN 50503 Fluids for

of the average viscometric degree

analysis of silicon carbide

electrotechnical applications.

of polymerization of new and aged

containing raw materials and

Standard for the inventory control,

cellulosic electrically insulating

refractory products. Part 3.

management, decontamination

materials

Determination of nitrogen, oxygen

and/or disposal of electrical

and metallic and oxidic

equipment and insulating liquids

GEL/112

constituents

containing PCBs

RPI/1

GEL/10

06/30159429 DC BS EN 60745-2-19/prA1 Hand-held motor-operated electric tools.

06/30159593 DC

06/30159752 DC

Safety. Part 2-19. Particular

BS ISO/IEC 15457-3 Identification

BS ISO/IEC 19781-1 Information

requirements for jointers

cards. Thin flexible cards. Part 3.

technology. Learning, education

CPL/61/6

Test methods

and training. Registry. Part 1.

IST/17

Registry content

IST/43 06/30159436 DC EN 15303-1 Design and

06/30159628 DC

application of plasterboard systems

BS EN 60268-5/prA1 Sound

06/30159756 DC

system equipment. Part 5.


on frames. Part 1. General

B/544/3

Loudspeakers


EPL/100

and training. Registry. Part 2. Registration authority process

06/30159524 DC

IST/43

BS EN ISO 12625-10 Tissue paper

06/30159668 DC

and tissue products. Part 10.

BS EN 50508 Multi-purpose

Determination of demand water

insulating sticks for electrical

06/30159760 DC

absorption rate and capacity, under

operations on high voltage


controlled hydraulic pressure

installations

PAI/11


PEL/78

and training. Collaborative workplace. Part 1. Collaborative workplace data model

06/30159543 DC

06/30159671 DC


BS EN 13363-1/prA1 Solar


protection devices combined with


glazing. Calculation of solar and

06/30159763 DC


light transmittance. Part 1.


General information and sample

Simplified method

IST/43


B/540

preparation

RPI/1

and training. Collaborative workplace. Part 2. Collaborative environment data model

06/30159694 DC 06/30159547 DC

BS ISO 23601 Safety identification.


Escape plan signs

IST/43

PH/8/1


06/30159766 DC





Determination of loss on ignition,

and training. Collaborative

total carbon, free carbon and

technology. Collaborative

silicon carbide, total and free silica

workplace. Part 3. Collaborative

and total and free silicon

group data model

RPI/1


IST/43

Page 39 of 71

06/30159770 DC

06/30160017 DC

06/30160085 DC

BS ISO 2575 AMD5 Road

BS ISO 1496-1:1990/DAM 6 Series

BS ISO 15970 Natural gas.

vehicles. Symbols for controls,

1. Freight containers. Specification

Measurement of properties.

and testing. Part 1. General cargo

Volumetric properties. density,

containers for general purposes.

pressure, temperature and

Amendment 6. Racking test for 45

compression factor

indicators and tell-tales

AUE/12

PTI/15

ft containers

06/30159843 DC

TW/1

BS ISO 13680 Petroleum and

06/30160122 DC

natural gas industries. Corrosion. resistant alloy seamless tubes for

06/30160027 DC

ISO/DIS 26603 Plastics. Aromatic

use as casing, tubing and coupling

BS EN 62055-52 Electricity

isocyanates for use in the

stock. Technical delivery

metering. payment systems. Part

production of polyurethanes.

conditions

52. Standard transfer specification

Determination of total chlorine

PSE/17/-/5

PRI/72/4

(STS). Physical layer protocol for a two-way virtual token carrier for direct local connection

06/30159940 DC

PEL/13

BS EN 60034-15 Rotating

06/30160162 DC BS EN 3155-074 Aerospace

electrical machines. Part 15.

series. Electrical contacts used in

Impulse voltage withstand levels of

06/30160031 DC

elements of connection. Part 074.

rotating A.C. machines with

BS ISO 17564 Hydrogenated nitrile

Contacts, electrical, quadrax, size

rubber (HNBR). Determination of

08, male, type E, crimp, class R.

residual unsaturation by iodine

Product standard

form-wound stator coils

PEL/2

ACE/6/-/3

value

PRI/23 06/30159993 DC 06/30160165 DC

BS EN 61373 Railway applications. Rolling stock equipment. Shock

06/30160034 DC

BS EN 3155-075 Aerospace

and vibration tests

BS ISO 7781 Styrene-butadiene

series. Electrical contacts used in

rubber, raw. Determination of soap

elements of connection. Part 075.

GEL/9/2

and organic-acid content

Contacts, electrical, quadrax, size

PRI/23 06/30160003 DC

08, female, type E, crimp, class R. Product standard

BS ISO 17712 Freight containers.

ACE/6/-/3 06/30160058 DC

Mechanical seals

TW/1

06/30160006 DC

BS EN ISO 8536-4 Infusion equipment for medical use. Part 4.

06/30160259 DC

Infusion sets for single use, gravity

BS ISO 8829-1 Aerospace. Test

feed

BS EN ISO 11644 Leather. Test for

methods for polytetrafluoroethylene

CH/212

adhesion of finish

(PTFE) innnertube hose assemblies. Part 1. Metallic

TCI/69

(stainless steel) braid

06/30160065 DC

ACE/69

BS EN ISO 11143 ED 2 Dental

06/30160010 DC

equipment. Amalgam separators

BS EN ISO 3950 Dentistry.

CH/106/4

Designation system for teeth and

06/30160262 DC BS EN 4642 Aerospace series.

areas of the oral cavity

CH/106/3

Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet. 0.6 mm $3L a $3L 50 mm. 900 MPa $3L Rm $3L 1 050 Mpa

ACE/61/-/15


Page 40 of 71

06/30160265 DC

06/30160391 DC

07/30135624 DC

BS ISO 21462 Aerospace. Fluid

BS ISO 5145 AMD 2 Cylinder


systems. Geometrical configuration

valve outlets for gases and gas

technology. Security techniques.

mixtures. Selection and

Cryptographic techniques based

of flareless acorn. Inch series

ACE/69

dimensioning

on elliptic curves. Part 1. General

PVE/3

IST/33

06/30160268 DC BS ISO 21463 Aerospace. Fluid

06/30160408 DC

07/30142135 DC

systems. Geometrical configuration

BS EN 60966-2-4 Radio frequency

BS EN 1012-1 Compressors and

of bosses, fluid connection, internal

and coaxial cable assemblies. Part

vacuum pumps. Safety

2-4. Detail specification for cable

requirements. Part 1. Air

assemblies for radio and TV

compressors

straight threads. Inch series

ACE/69

MCE/8/-/4

receivers. Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors

06/30160271 DC

EPL/46 07/30143612 DC

BS ISO 21464 Aerospace. Fluid systems. Geometrical configuration

BS ISO 8586-2 Sensory analysis.

of blunt nose flareless. Inch series

ACE/69

07/30090385 DC

General guidance for the selection,

ISO 13408-1 Aseptic processing of

training and monitoring of

health care products. Part 1.

assessors. Part 2. Expert sensory


06/30160338 DC

assessors

CH/198

AW/12

BS EN 50504 Validation of arc welding equipment

WEE/6

06/30160356 DC

07/30117272 DC

07/30145003 DC

BS ISO/IEC 27005 Information

EN 1386 Aluminium and aluminium


alloys. Tread plate. Specifications

NFE/35

Information security risk

BS EN 60318-4 ED 1

management

Electroacoustics. Simulators of

IST/33 07/30152595 DC

human head and ear. Occluded-ear simulator for the

BS IEC 62024-2 High frequency

measurement of earphones coupled to the ear by insert

EPL/29

07/30125841 DC

inductive components. Electrical

IEC 62097 ED 1.0 Hydraulic

characteristics and measuring

machines. Determination of

methods. Part 2. Rated current of

performance from model

inductors for D.C. to D.C. converter

EPL/51

acceptance tests of radial and axial

06/30160368 DC

flow hydraulic machines with

BS EN 80100 Basic safety and

consideration of scale effects

essential performance

07/30154505 DC

including the effect of surface

requirements of clinical

BS 3882 Specification for top soil

roughness

thermometer for body temperature

AW/20

MCE/15

measurement

CH/121/3 07/30154860 DC

07/30135157 DC

BS 594987 Hot rolled asphalt for


06/30160373 DC

roads and other paved areas.


BS EN 60601-2-4 ED 3 Medical

Specification for transport, laying

Time-stamping services. Part 1.

electrical equipment. Particular

and compaction and design

Framework

requirements for basic safety and

IST/33

essential performance of cardiac

protocols

B/510/1

defibrillators

CH/62/4


Page 41 of 71

07/30158318 DC

07/30160567 DC

BS EN 1367-1:1999

BS 4N 100-1 AMD 2 Aircraft

BS ISO/IEC 26514 Software and

Determination of resistance to

oxygen systems and equipment.

systems engineering. User

freezing and thawing

documentation requirements for

The text of this draft European

documentation designers and

standard was circulated under the

developers £18.00 members, £36.00 non-members

CEN unique acceptance procedure

Part 1. Design and installation

ACE/38

07/30159086 DC

for approval to publish. Although

IST/15

BS EN 15616 Copper and copper alloys. Determination of cadmium

the formal consultation period on the proposal is now closed, a copy of the text can be made available

content. Flame atomic absorption spectrometry method (FAAS)

RHE/19

07/30160570 DC

on request using document

BS EN 61169-24 Radio-frequency

reference B/502/6.0041/06 from

connectors. Part 24. Sectional

the Programme Manager (below).

Contact: Ray Kerrigan Email: [email protected]

specification. Radio frequency

07/30159715 DC

coaxial connectors with screw

BS EN 62317-13 Ferrite cores.

coupling, typically for use in 75

Dimensions. Part 13. PQ-cores for

ohm cable distribution systems

use in power supply applications

EPL/51

B/502/6

BS EN ISO 22610

(type F)

EPL/46/2

Surgical drapes, gowns and clear air suits, used as medical devices,

07/30160401 DC

07/30160645 DC

BS EN ISO 9994/prA1 Lighters.

BS EN ISO 15378 Primary

Safety specification

packaging materials for medicinal

CW/32

for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration

products. Particular requirements

Please note that copies of this text

for the application of ISO

are available from the Programme

9001:2000, with reference to good

07/30160560 DC

Manager (below).

manufacturing practice (GMP)

PD 5500 AMD 2 Specification for

CH/212

unfired fusion welded pressure vessels

PVE/1

Contact: Philippa Younas Email: [email protected] CH/62/1

07/30160659 DC BS EN 62024-1 High frequency

07/30160561 DC BS ISO/IEC 12207 Systems and software engineering. Software life

inductive components. Electrical

BS EN 61223:-

characteristics and measuring

Evaluation and routine testing in

methods. Part 1. Nanohenry range

medical imaging departments

chip inductor

cycle processes £18.00 members, £36.00 non-members

EPL/51 BS EN 61223-3-6 Acceptance tests. Image display

IST/15

devices

DOCUMENTS NOT ISSUED AS DPCs

Copies of the text to this standard,

BS ISO/IEC 15288 Systems and

BS EN 1367:-

CENELEC members as a draft for

software engineering. System life

Tests for thermal and weathering

enquiry by CENELEC/TC 62, are

cycle processes

properties of aggregates


07/30160564 DC

IST/15

which has been circulated to

Manager (below).

Contact: Philippa Younas Email: [email protected] CH/62/2

DOCUMENTS NOT ISSUED AS DPCs

Page 42 of 71

IEC 61076:-

ISO/IEC 14496-4:2004/FPDAM 16

Connectors for electronic

Conformance testing. Amendment

equipment. Product requirements

16: MPEG-J GFX conformance

IEC 61076-3-117 Rectangular connectors. Protective housings for use with 8-way

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE


EN 13454:-

which has been circulated to ISO

Binders, composite binders and

members as a final committee draft

factory made mixtures for floor

by ISO/IEC JTC 1/SC 29, are

screeds based on calcium sulfate


shielded and unshielded

Manager (below) to whom

connectors for frequencies up to

EN 13454-2:2003/prA1

comments should be submitted by

1000 MHz for industrial

Test methods

19 April, 2007.

environments incorporating the

This draft European amendment

Contact: Jean Stride Email: [email protected]

60603-7. Variant 14 related to IEC

makes a modification to clause

IST/37

61076-3-106. Push pull coupling

4.4.2.1. Please direct any comment on this proposed change by e-mail

This document has been issued at CD stage to adopt IEC PAS

to the Programme Manager

ISO/IEC FCD 21000:-

61076-3-117:2006 as an

(below) before 31 March, 2007.

Information technology. Multimedia

international standard. Copies are

Contact: Bernard Williams Email: [email protected]

framework (MPEG-21)

available on request from the

B/544/1

contact point (below).

Contact: Committee Service Centre Email: [email protected]

ISO/IEC FCD 21000-14

EPL/48

Conformance testing

prEN 1436


Road marking materials. Road


ISO/DIS 11699:-


Non-destructive testing. Industrial

by ISO/IEC JTC 1/SC 29, are

radiographic film


marking performance for road users This work failed the CEN formal vote and this updated draft has

Manager (below) to whom

ISO/DIS 11699-1 Classification of film systems for industrial radiography

now been issued, for which only


editorial comments will be

5 March, 2007.

considered. Any such comments


should be submitted using the CEN

IST/37

Copies of this document, which is

the Programme Manager (below)

identical to EN 584-1:2006, are available from the Programme Manager (below).

Contact: Anne Hannan Email: [email protected] WEE/-/1

comment template and e-mailed to before 1 March, 2007.

ISO/IEC FCD 23001:-

Contact: Bernard Williams Email: [email protected]

Information technology. MPEG systems technologies

B/509/2

ISO/IEC FCD 23001-2 ISO/IEC 14496:-

Fragment request units

Coding of audio-visual objects


CEN EUROPEAN STANDARDS


EN 3:-


Portable fire extinguishers

by ISO/IEC JTC 1/SC 29, are available from the Programme Manager (below) to whom

EN 3-9:2006


Additional requirements to EN 3-7

21 March, 2007.

for pressure resistance of CO$d2


extinguishers

IST/37


FSH/2

Page 43 of 71

EN 30:-

EN 455-3:2006

EN 474-10:2006

Domestic cooking appliances

Requirements and testing for

Requirements for trenchers

burning gas fuel

biological evaluation

B/513/1 CH/205/3 EN 474-11:2006

EN 30-1:Safety

EN 474:-

Requirements for earth and landfill

Earth-moving machinery. Safety

compactors

B/513/1 EN 30-1-3:EN 474-1:2006

Appliances having a glass ceramic

EN 474-12:2006


hotplate CORRIGENDUM 1:September 2004

B/513/1

Requirements for cable excavators

B/513/1

GSE/35 EN 474-2:2006 EN 565:2006

Requirements for tractor-dozers

EN 30-1-4:-

B/513/1

Appliances having one or more

Mountaineering. Tape. Safety requirements and test methods

burners with an automatic burner

SW/136/5

control system AMENDMENT 1:November 2006

EN 474-3:2006

GSE/35

Requirements for loaders

B/513/1

EN 566:2006 Mountaineering. Slings. Safety

EN 81:-

requirements and test methods

EN 474-4:2006

Safety rules for the construction

SW/136/5

Requirements for backhoe loaders

and installation of lifts. Particular

B/513/1

applications to passenger lifts and

EN 843:-

goods passenger lifts


EN 474-5:2006

Monolithic ceramics. Mechanical

Requirements for hydraulic

EN 81-71:-

properties at room temperature

excavators

Vandal resistant lifts

B/513/1

AMENDMENT 1:December 2006

EN 843-1:2006

MHE/4

Determination of flexural strength

EN 474-6:2006

RPI/13

Requirements for dumpers

EN 339:2006

B/513/1


EN 843-2:2006

AL-P7010-T76. Die forgings. a $3L 200mm

ACE/61/-/24

Determination of Young's modulus,

EN 474-7:2006

shear modulus and Poisson's ratio

Requirements for scrapers

RPI/13

B/513/1 EN 420:Protective gloves. General

EN 474-8:2006

requirements and test methods CORRIGENDUM:November 2006

Requirements for graders

EN 843-3:2005 Determination of subcritical crack

B/513/1

PH/3/8

growth parameters from constant stressing rate flexural strength tests

EN 455:Medical gloves for single use


RPI/13

EN 474-9:2006 Requirements for pipelayers

B/513/1

Page 44 of 71

EN 843-4:2005

EN 1015-2:-

EN 1093-3:2006

Vickers, Knoop and Rockwell

Bulk sampling of mortars and

Bench test method for the

superficial hardness

preparation of test mortars AMENDMENT 1:December 2006

measurement of the emission rate

RPI/13

B/519/2

of a specified pollutant

MCE/3

EN 843-5:2006 Statistical analysis

RPI/13

EN 1015-3:-

EN 1634:-

Determination of consistence of

Fire resistance and smoke control

fresh mortar (by flow table) AMENDMENT 2:December 2006

tests for door and shutter

B/519/2

EN 927:Paints and varnishes. Coating materials and coating systems for

EN 1015-6:-

exterior wood

Fire resistance test for doors and

fresh mortar AMENDMENT 1:December 2006

shutter assemblies and openable

B/519/2

Natural weathering test

and elements of building hardware

EN 1634-1:-

Determination of bulk density of

EN 927-3:2006

assemblies, openable windows

STI/28

windows CORRIGENDUM:November 2006

FSH/22 EN 1015-9:-

EN 927-5:2006

Determination of workable life and

Assessment of the liquid water

correction time of fresh mortar AMENDMENT 1:December 2006

permeability

EN 2947:2006 Aerospace series. Steel

B/519/2

STI/28

melted. Non heat treated. Cold drawn wire. A or D $3L 2,3 mm

EN 1015-10:-

EN 958:2006

FE-PA3004 (X10CrNi18-09). Air

ACE/61/-/15

Determination of dry bulk density of

Mountaineering. Energy absorbing

hardened mortar AMENDMENT 1:December 2006

systems for use in kletter-steig (via ferrata) climbing. Safety

EN 3114:-

B/519/2

requirements and test methods

Aerospace series. Microstructure of (alpha + beta) titanium alloy

SW/136/5

products

EN 1015-11:Determination of flexural and

EN 997:WC pans with integral trap


B/503

compressive strength of hardened

EN 3114-001:2006

mortar AMENDMENT 1:December 2006


ACE/61/-/49

B/519/2 EN 3114-003:2006

EN 1015:-

EN 1093:-

Methods of test for mortar for

Microstructure of plate

Safety of machinery. Evaluation of

masonry

ACE/61/-/49

the emission of airborne hazardous substances

EN 3114-004:2006

EN 1015-1:-

Microstructure of sheet for

Determination of particle size

EN 1093-2:2006

distribution (by sieve analysis) AMENDMENT 1:December 2006

Tracer method for assessing the

B/519/2

superplastic forming

ACE/61/-/49

emission rate of a specified pollutant

MCE/3

EN 3155:Aerospace series. Electrical contacts used in elements of connection


Page 45 of 71

EN 3155-005:2006

EN 3716:-

EN 3976:2006


Aerospace series. Connector,

Aerospace series. Titanium and

crimp, class T. Product standard

single-way with triaxial interface,

titanium alloys. Test method.

for transmission of digital data

Chemical analysis for the

ACE/6/-/3

determination of hydrogen content

ACE/61/-/49 EN 3155-005:-

EN 3716-006:2006


Crimp plug. Product standard

ACE/6/-/3

crimp, class T. Product standard CORRIGENDUM 1:December 2006


ACE/6/-/3

AL-P2220-T88. Sheet and strip.

EN 3816:2006

0,5 mm $3L a $3L 6 mm


EN 3375:-

EN 4003:2006

ACE/61/-/24

FE-PA3601 (X6CrNiT118-10). Air

Aerospace series. Cable, electrical,

melted. Softened and cold rolled.

for digital data transmission

EN 4008:-

Sheet and strip. a $3L 3 mm. Rm

Aerospace series. Elements of

$3M 800 MPa

ACE/61/-/15

EN 3375-006:2006

electrical and optical connection. Crimping tool and associated

Single braid. 78 Ohms. Type XM. Product standard

ACE/6/-/2

EN 3375-007:2006 Double braid. 77 Ohms. Type WW.

accessories

EN 3969:2006 Aerospace series. Steel FE-PL1507 (40CrMoV12). Air

EN 4008-017:2006

melted. Annealed. Forging stock. a

Head for crimping tool

or D $3L 350 mm

M22520/4-01. Product standard

ACE/61/-/15

Product standard

ACE/6/-/3

ACE/6/-/2

EN 3491:2006 Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air

EN 3971:2006

EN 4049:-

Aerospace series. Steel FE-P1507

Aerospace series. Thermocouple

(40CrMoV12). Consumable

extension cable. Operating

electrode remelted. Annealed.

temperatures between -65$0DC

Forging stock. a or D $3L 350 mm

melted. Hardened and tempered.

and +260$0DC

ACE/61/-/15

Forgings. De $3L 100 mm. 900 MPa $3L Rm $3L 1 100 MPa

ACE/61/-/15

EN 4049-001:2006 EN 3972:2006

Technical specification

ACE/6/-/2

Aerospace series. Steel FE-PL1507 (40CrMoV12).

EN 3507:2006

Consumable electrode remelted.


EN 4049-003:2006

Hardened and tempered. Bar for

FE-PL1501 (30CrMo12). Air

Single core nickel chromium /

machining. De $3L 50 mm. 1 250

melted. Hardened and tempered.

nickel-aluminium. Product standard

MPa $3L Rm $3L 1 400 MPa

Forgings. De $3L 100 mm. 930

ACE/6/-/2

ACE/61/-/15

MPa $3L Rm $3L 1080 MPa

ACE/61/-/15 EN 4049-004:2006

EN 3973:2006

aluminium shielded and jacketed.

FE-CM3801 (X5CrNiCuNb16-4).

Aerospace series. Heat resisting

Homogenised, solution treated and

alloy NI-PH2301

precipitation hardened. Investment

(NiCr21Fe18Mo9). Non heat

Product standard

ACE/6/-/2

casting. De $3L 50 mm. Rm $3M 1

treated. Forging stock. a or D $3L

030 Mpa

250mm

ACE/61/-/48 CEN EUROPEAN STANDARDS

Two core nickel chromium / nickel


EN 3668:2006

ACE/61/-/15 Page 46 of 71

EN 4057:-

EN 4057-406:2006

EN 4359:2006

Cable ties for harnesses. Test

Cable ties for harnesses, test

Aerospace series. Six lobe recess.

methods

methods. Locking barb retention

Drivers. Technical specification

ACE/6/-/8

ACE/12

EN 4057-100:2006 Cable ties for harnesses, test

EN 4108:2006

EN 4382:2006

methods. General

Aerospace series. Wrenches, crow

Aerospace series. Heat resisting

foot attachment socket, socket

alloy NI-PH3601 (NiCr22Mo9Nb).

ACE/6/-/8

drive

Solution treated. Seamless tube.

ACE/12 EN 4057-302:2006

For hydraulic application. D $3L 50 mm, a $3L 3 mm


ACE/61/-/48 EN 4109:2006

methods. Flammability

ACE/6/-/8

Aerospace series. Wrenches,

EN 4383:2006

socket, face spanner

ACE/12 EN 4057-304:2006

Aerospace series. Heat resisting alloy NI-CH2601

Cable ties for harnesses, test methods. Loop tensile strength at

EN 4110:2006

maximum working temperature

Aerospace series. Wrenches, open

ACE/6/-/8

(NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock

ACE/61/-/48

end, box

ACE/12 EN 4496:EN 4057-306:2006 Cable ties for harnesses, test

EN 4158:2006

methods. Heat ageing test

Aerospace series. Paints and

ACE/6/-/8

Aerospace series. Screws, 100$0Dcountersunk normal head, offset cruciform recess, close

varnishes. Test method for

tolerance normal shank, short

measurement of electrical surface

thread, in titanium alloy, anodized,

resistance of conductive layers

EN 4057-307:2006

ACE/65/-/4

with aluminium pigmented coating. Classification: 1 100MPa (at

Resistance to ultra violet radiation

ambient temperature) / 315$0DC CORRIGENDUM:November 2006

ACE/6/-/8 EN 4354:2006

ACE/12


EN 4057-401:2006

Drivers, relieved


ACE/12

methods. Loop tensile strength

EN 4530:Aerospace series. Sealing sleeves

ACE/6/-/8

used in elements of connection

EN 4356:2006 Aerospace series. Six lobe recess.

EN 4057-402:2006

Drivers, short


ACE/12

EN 4530-005:2006 Sealing sleeves. For external

methods. Life cycle

diameter cable 3 mm to 4,1 mm.

ACE/6/-/8 EN 4357:2006

Product standard

ACE/6/-/3


EN 4057-404:2006

Drivers, handle


ACE/12

methods. Low temperature

EN 4530-006:2006 Sealing sleeves. For external

installation

ACE/6/-/8

EN 4358:2006

diameter cable 4.68 mm to 5.05


mm. Product standard

ACE/6/-/3

Drivers, double ended, 90$0D

ACE/12


Page 47 of 71

EN 10021:2006

EN 13501:-

EN 13964:-

General technical delivery

Fire classification of construction

Suspended ceilings. Requirements

requirements for steel products

products and building elements

and test methods AMENDMENT 1:November 2006

ISE/5

B/548 EN 13501-5:EN 12271:2006

Classification using data from

Surface dressing

B/510/2

EN 13967:-

external fire exposure to roofs tests CORRIGENDUM:November 2006


FSH/22/8

Plastic and rubber damp proof sheets including plastic and rubber

EN 12674:Transport packaging. Roll

EN 13707:-

containers


basement tanking sheet. Definitions and characteristics AMENDMENT 1:November 2006

B/546/2

Reinforced bitumen sheets for roof waterproofing. Definitions and

EN 12674-4:2006

characteristics AMENDMENT 1:November 2006

Performance requirements

PKW/0

EN 13969:-

B/546/1

Flexible sheets for waterproofing. Bitumen damp proof sheets

EN 12923:-

EN 13758:-


Textiles. Solar UV protective

Monolithic ceramics

properties

including bitumen basement tanking sheets. Definitions and characteristics AMENDMENT 1:November 2006

B/546/5 EN 12923-1:2006

EN 13758-1:-

General practice for undertaking

Method of test for apparel fabrics

corrosion tests


EN 13970:-

TCI/66

RPI/13

Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and

EN 13445:-

EN 13758-2:-

Unfired pressure vessels

Classification and marking of


B/546/5

apparel AMENDMENT 1:December 2006

TCI/66

EN 13445-6:Requirements for the design and

EN 13984:Flexible sheets for waterproofing.

fabrication of pressure vessels and

Plastic and rubber vapour control

EN 13858:2006

pressure parts constructed from

layers. Definitions and

Corrosion protection of metals.

spheroidal graphite cast iron AMENDMENT 2:December 2006


Non-electrolytically applied zinc

PVE/1

flake coatings on iron or steel

B/546/2

components

STI/33 EN 13480:-

EN 14132:2003

Metallic industrial piping

Foodstuffs. Determination of

EN 13947:2006

ochratoxin A in barley and roasted

Thermal performance of curtain

EN 13480-3:-

walling. Calculation of thermal

Design and calculation

transmittance

AMENDMENT 2:November 2006

coffee. HPLC method with immunoaffinity column clean-up

B/540

AW/-/3

PVE/10


Page 48 of 71

EN 14133:2003

EN 14476:-

EN 15115:2006


Chemical disinfectants and

Textile floor coverings.

ochratoxin A in wine and beer.

antiseptics. Virucidal quantitative

Determination of sensitivity to

HPLC method with clean-up on a

suspension test for chemical

spilled water

immunoaffinity column

disinfectants and antiseptics used

AW/-/3

PRI/3

in human medicine. Test method and requirements (phase 2, step 1) AMENDMENT 1:October 2006

EN 15161:2006

EN 14133:-

CH/216


Products used for treatment of water intended for human

ochratoxin A in wine and beer.

consumption. Anthracite

HPLC method with immunoaffinity

EN 14492:-

column clean-up CORRIGENDUM 1:December 2006

Cranes. Power driven winches and

B/504/13

hoists

EN 15168:2006

AW/-/3

Surface active agents.

EN 14492-2:2006 EN 14140:-

Determination of hydroxyl value.

Power driven hoists

p-Toluensulfonyl isocyanate (TSI)

MHE/3/6

LPG equipment and accessories. Transportable refillable welded

method and potentiometric titration with tetrabutylammonium

steel cylinders for LPG. Alternative

hydroxide

EN 14647:-

design and construction AMENDMENT 1:December 2006

CII/34

Calcium aluminate cement.

PVE/19

Composition, specifications and

EN 15219:2006

conformity criteria CORRIGENDUM 1:November 2006

EN 14346:2006

B/516/6


Water equipment inside buildings. Nitrate removal devices. Requirements for performance,

Calculation of dry matter by

safety and testing

EN 14797:2006

determination of dry residue or

B/504

Explosion venting devices

water content

FSH/23

B/508/3

EN 15257:2006 Cathodic protection. Competence

EN 14975:2006

EN 14354:-

levels and certification of cathodic

Loft ladders. Requirements,

Wood-based panels. Wood veneer

protection personnel

marking and testing

floor covering CORRIGENDUM 1:November 2006

GEL/603

B/512 B/541 EN 14995:2006

EN 14411:2006

Plastics. Evaluation of

Ceramic tiles. Definitions,

compostability. Test scheme and

classification, characteristics and

specifications

CEN WORKSHOP AGREEMENTS CWA 15627:2006

PRI/82

marking

Small punch test method for metallic materials

B/539

no current standard is superseded £68.00 members, £136.00 non-members

EN 15091:2006 EN 14438:2006

Sanitary tapware. Electronic

Gas-fired insets for heating more

opening and closing sanitary tapware

than one room

GSE/36

B/504

CEN REPORTS CEN/TR 12101:Smoke and heat control systems

CEN REPORTS

Page 49 of 71

CEN/TR 12101-4:2006

EN 60317:-

Installed SHEVS systems for smoke and heat ventilation

FSH/25

EN 55014-1:2006 (CISPR 14-1:2005) Emission

Specifications for particular types of winding wires

GEL/210/11 EN 60317-0-6:(IEC 60317-0-6:2001/AMD 1:2006)

CEN/TR 15481:2006 EN 55016:-

Welding of reinforcing steel. Tack

General requirements. Glass-fibre


weldability. Test methods and

wound resin or varnish


performance requirements

WEE/43

impregnated, bare or enamelled

and methods

round copper wire AMENDMENT 1:December 2006

GEL/55 EN 55016-1-2:(CISPR 16-1-2:2003/AMD 2:2006)

CEN TECHNICAL SPECIFICATIONS

Ancillary equipment. Conducted

EN 60335:-

CEN/TS 13547:2006

disturbances. Update of LISN

Household and similar electrical

Industrial valves. Copper alloy ball

specifications AMENDMENT 2:December 2006

appliances. Safety

valves

GEL/210/12

PSE/7

EN 60335-2-15:(IEC 60335-2-15:2002)

EN 55016-2-3:2006 (CISPR 16-2-3:2006)

CEN/TS 14421:2006 Hose tail and ferrule for crimping

Particular requirements for appliances for heating liquids CORRIGENDUM:December 2006

Methods of measurement of

and swaging

PRI/66

disturbances and immunity.

CPL/61/07

Radiated disturbance measurements

GEL/210/12

CEN/TS 15379:2006

EN 60454:Pressure-sensitive adhesive tapes

Building management. Terminology and scope of services

RHE/16

for electrical purposes

EN 60034:Rotating electrical machines

EN 60454-3-8:(IEC 60454-3-8:2006)

CEN/TS 15440:2006 EN 60034-26:2006 (IEC 60034-26:2006)

Solid recovered fuels. Method for the determination of biomass

Specifications for individual materials. Woven fabric tapes with

Effects of unbalanced voltages on

content

PTI/17

pressure-sensitive adhesive based

the performance of three-phase

on glass, cellulose acetate alone or

cage induction motors

PEL/2

combined with viscose fibre CORRIGENDUM:December 2001

GEL/15/3

CENELEC PUBLICATIONS

EN 60118:-

EN 45020:2006 (ISO/IEC GUIDE 2:2004)

Hearing aids

EN 60464:Varnished used for electrical

Standardization and related activities. General vocabulary

QS/3

insulation

EN 60118-4:2006 (IEC 60118-4:2006) Induction loop systems for hearing

EN 55014:Electromagnetic compatibility. Requirements for household

EN 60464-2/A1:(IEC 60464-2:2001/A1:2006) Methods of test

aid purposes. Magnetic field strength

EPL/29

CORRIGENDUM:December 2001 GEL/15/3/7

appliances, electric tools and similar apparatus


Page 50 of 71

EN 60512:Connectors for electronic

EN 60670-22:2006 (IEC 60670-22:2003 MODIFIED)

EN 61000-4-12:2006 (IEC 61000-4-12:2006)

equipment. Tests and



measurements

connecting boxes and enclosures

techniques. Ring wave immunity

PEL/23

test

GEL/210/12 EN 60512-9-3:(IEC 60512-9-3:2006)

EN 60745:-

Endurance tests. Test 9c:

Safety of hand-held

Mechanical operation

motor-operated electric tools

EN 61033:2006 (IEC 61033:1991/A1:2006) Test methods for the determination

(engaging/separating) with

of bond strength of impregnating

electrical load CORRIGENDUM:December 2006

EPL/48/2

EN 60745-2-6:(IEC 60745-2-6:2003/AMD 1:2006) Particular requirements for

agents to an enamelled wire substrate

GEL/15/3/7

hammers AMENDMENT 1:May 2006

EN 60512-12:-

CPL/61/6

Soldering tests

EN 61061:Insulating materials. Non-impregnated densified

EN 60929:(IEC 60929:2006)

EN 60512-12-2:2006 (IEC 60512-12-2:2006)

laminated wood for electrical purposes

A.C.-supplied electronic ballasts for

Test 12b: Solderability, wetting,

tubular fluorescent lamps.

soldering iron method

EPL/48/2

Performance requirements CORRIGENDUM:December 2005

CPL/34/3 EN 60512-12-3:(IEC 60512-12-3:2006) Test 12c: Solderability, de-wetting

EN 61061-1:2006 (IEC 61061-1:2006) Definitions, designation and general requirements

GEL/15/3/6

EN 60947:-

CORRIGENDUM 1:December 2006 EPL/48/2

Low-voltage switchgear and controlgear

EN 61076:Connectors for electronic

EN 60512-12-4:(IEC 60512-12-4:2006)

EN 60947-4-2:(IEC 60947-4-2:1999/AMD 2:2006)

Test 12d: Resistance to soldering

Contactors and motor-starters.

heat, solder bath method CORRIGENDUM 1:December 2006

A.C. semiconductor motor

EPL/48/2

equipment. Product requirements

EN 61076-3-106:2006 (IEC 61076-3-106:2006)

controllers and starters AMENDMENT 2:December 2006

Rectangular connectors. Detail

PEL/17/2

specification for protective housings for use with 8-way

EN 60512-12-5:(IEC 60512-12-5:2006)

shielded and unshielded

Test 12e: Resistance to soldering heat, soldering iron method CORRIGENDUM:December 2006

EPL/48/2

EN 60947-5-8:2006 (IEC 60947-5-8:2006)

connectors for industrial


60603-7 series interface

environments incorporating the IEC

switching elements. Three-position

EPL/48

enabling switches

PEL/17/2 EN 61163:-

EN 60670:-

Reliability stress screening

Boxes and enclosures for electrical

EN 61000:-

accessories for household and


similar fixed electrical installations

(EMC)


Page 51 of 71

EN 61163-1:2006 (IEC 61163-1:2006)

EN 61300-2-38:2006 (IEC 61300-2-38:2006)

EN 61755-1:(IEC 61755-1:2005)

Repairable items manufactured in

Sealing for pressurized fibre optic

Optical interfaces for single mode

lots

devices

DS/1

non-dispersion shifted fibres.

GEL/86/2

General and guidance CORRIGENDUM:December 2001

GEL/86/2 EN 61212:-

EN 61326:-

Industrial rigid round laminated

Electrical equipment for

tubes and rods based on

measurement, control and

thermosetting resins for electrical

laboratory use. EMC requirements

EN 61788:Superconductivity

purposes

EN 61212-2:2006 (IEC 61212-2:2006) Methods of test

GEL/15/3/6

EN 61326-2-4:2006 (IEC 61326-2-4:2006)

EN 61788-7:2006 (IEC 61788-7:2006)

Particular requirements. Test

Electronic characteristic

configurations, operational

measurements. Surface resistance

conditions and performance criteria

of superconductors at microwave

for insulation monitoring devices,

frequencies

L/-/90

according to IEC 61557-8 and for

EN 61241:-

equipment for insulation fault

Electrical apparatus for use in the

location according to IEC 61557-9

presence of combustible dust

GEL/65/1

EN 62132:Integrated circuits. Measurement of electromagnetic immunity, 150 kHz

EN 61241-0:2006

to 1 GHz

EN 61338:-

(IEC 61241-0:2004 MODIFIED/CORR:2005)

Waveguide type dielectric resonators


EN 62132-1:(IEC 62132-1:2006/CORR 2006) General conditions and definitions

GEL/31/20 EN 61338-1-4:(IEC 61338-1-4:2005)

EN 61241-1:2006 (IEC 61241-1:2004) Protection by enclosures "tD"

CORRIGENDUM:November 2006

EPL/47

General information and test conditions. Measurement method

GEL/31/20

of complex relative permittivity for

EN 62217:(IEC 62217:2005)

dielectric resonator materials at

Polymeric insulators for indoor and

millimetre-wave frequency CORRIGENDUM:November 2006

EN 61300:Fibre optic interconnecting devices

EPL/49

and passive components. Basic test and measurement procedures

outdoor use with a nominal voltage > 1 000 V. General definitions, test methods and acceptance criteria CORRIGENDUM:December 2006

EN 61672:-

PEL/36

Electroacoustics. Sound level

EN 61300-2:-

meters

Tests

EN 62271:-

EN 61300-2-16:2006 (IEC 61300-2-16:2006) Mould growth

controlgear

EPL/29 GEL/86/2 EN 61755:Fibre optic connector optical interfaces


High-voltage switchgear and

EN 61672-3:2006 (IEC 61672-3:2006) Periodic tests

EN 62271-100:(IEC 62271-100:2001/A2:2006) High-voltage alternating-current circuit-breakers AMENDMENT 2:December 2001

PEL/17/1

Page 52 of 71

EN 62271-109:2006 (IEC 62271-109:2006)

EN 175301-801:2006 High density rectangular

EN 301 925: December 2006 (Version 1.2.1)

Alternating- current series

connectors, round removable

Electromagnetic compatibility and

capacitor by-pass switches

PEL/17/1

radio spectrum matters (ERM).

crimp contacts

EPL/48

Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands.

EN 62290:Railway applications. Urban guided transport management and

CENELEC TECHNICAL SPECIFICATIONS

command/control systems

CLC/TS 61111:2006

Technical characteristics and methods of measurement

(IEC 61111:1992/CORR:2000/A1:2002)

EN 302 842:Electromagnetic compatibility and

Matting of insulating material for

EN 62290-1:2006 (IEC 62290-1:2006)


electrical purposes

PEL/78

System principles and fundamental

VHF air-ground and air-air digital link (VDL) mode 4 radio

concepts

equipment. Technical

GEL/9 CLC/TS 61112:2006

characteristics and methods of

(IEC 61112:1992/CORR:2000/A1:2002)

EN 62308:2006 (IEC 62308:2006)

measurement for aeronautical mobile (airborne) equipment

Blankets of insulating material for electrical purposes

Reliability assessment and

PEL/78

durability analysis

DS/1

ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONS

EN 62329:Heat shrinkable moulded shapes

EN 62329-1:(IEC 62329-1:2005)

EN 300 162:-

Definitions and general


requirements CORRIGENDUM 1:December 2006

Radiotelephone transmitters and


GEL/15/3/5

EN 62343:-

receivers for the maritime mobile service operating in VHF bands

EN 300 162-2: December 2006 (Version 1.2.1)

Dynamic modules

Harmonized EN covering essential

EN 302 842-1: December 2006 (Version 1.2.1) Physical layer

EN 302 842-2: December 2006 (Version 1.2.1) General description and data link layer

EN 302 842-3: December 2006 (Version 1.2.1) Additional broadcast aspects

EN 302 842-4: December 2006 (Version 1.2.1) Point-to-point functions

requirements of article 3.2 of the

EN 62343-1-3:2006 (IEC 62343-1-3:2006)

R&TTE directive

Performance standards. Dynamic gain tilt equaliser with pigtails for

EN 300 162-3: December 2006 (Version 1.2.1)

use in controlled environment (category C)

GEL/86/3

Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE directive

EN 175301:Detail specification

OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS EG 202 416: December 2006 (Version 1.1.2) Human factors (HF). User interfaces. Setup procedure design guidelines for mobile terminals and services

OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

Page 53 of 71

EG 202 417: December 2006 (Version 1.1.2)

ES 201 915-11: December 2006 (Version 1.6.1)

Human factors (HF). User

Account management SCF (Parlay

education guidelines for mobile

3)

terminals and services

EG 202 549: December 2006 (Version 1.1.1)

ES 201 915-12: December 2006 (Version 1.6.1) Charging SCF (Parlay 3)

Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Design guide. Application of security

ES 202 391:Open service access (OSA).

ES 201 915:-

ES 202 391-1: December 2006 (Version 1.2.1) Common (Parlay X 2)

Open service access (OSA). Application programming interface (API)

ES 201 915-1: December 2006 (Version 1.6.1) Overview (Parlay 3)

ES 201 915-2: December 2006 (Version 1.6.1) Common data definitions (Parlay 3)

ES 201 915-4: December 2006 (Version 1.6.1) Call control SCF (Parlay 3)

ES 201 915-5: December 2006 (Version 1.6.1) User interaction SCF (Parlay 3)

ES 201 915-6: December 2006 (Version 1.5.1) Mobility SCF (Parlay 3)

ES 201 915-8: December 2006 (Version 1.6.1) Data session control SCF (Parlay 3)

ES 202 391-10: December 2006 (Version 1.2.1) Call handling (Parlay X 2)

ES 202 391-11: December 2006 (Version 1.2.1) Audio call (Parlay X 2)

Parlay X web services

countermeasures to service capabilities

ES 202 391-9: December 2006 (Version 1.2.1) Terminal location (Parlay X 2)

ES 202 391-2: December 2006 (Version 1.2.1) Third party call (Parlay X 2)

ES 202 391-12: December 2006 (Version 1.2.1) Multimedia conference (Parlay X 2)

ES 202 391-13: December 2006 (Version 1.2.1) Address list management (Parlay X 2)

ES 202 391-3: December 2006 (Version 1.2.1) Call notification (Parlay X 2)

ES 202 391-14: December 2006 (Version 1.2.1) Presence (Parlay X 2)

ES 202 391-4: December 2006 (Version 1.2.1) Short messaging (Parlay X 2)

ES 202 915:Open service access (OSA). Application programming interface (API)

ES 202 391-5: December 2006 (Version 1.2.1) Multimedia messaging (Parlay X 2)

ES 202 391-6: December 2006 (Version 1.2.1) Payment (Parlay X 2)

ES 202 391-7: December 2006 (Version 1.2.1) Account management (Parlay X 2)

ES 202 391-8: December 2006 (Version 1.2.1) Terminal status (Parlay X 2)


ES 202 915-1: December 2006 (Version 1.4.1) Overview (Parlay 4)

ES 202 915-2: December 2006 (Version 1.4.1) Common data definitions (Parlay 4)

ES 202 915-3: December 2006 (Version 1.4.1) Framework (Parlay 4)

ES 202 915-4:Call control

Page 54 of 71

ES 202 915-4-1: December 2006 (Version 1.4.1)


TR 102 522: December 2006 (Version 1.1.1)

Call control common definitions

Connectivity manager SCF (Parlay


(Parlay 4)

4)

radio spectrum matters (ERM). Short range devices (SRD).

ES 202 915-4-2: December 2006 (Version 1.4.1) Generic call control SCF (Parlay 4)

ES 202 915-11: December 2006 (Version 1.4.1) Account management SCF (Parlay 4)

ES 202 915-4-3: December 2006 (Version 1.4.1) Multi-party call control SCF (Parlay 4)

Equipment for detecting movement. Radio equipment operating in the frequency range 17,1 GHz to 17,3 GHz. System reference document for ground based synthetic aperture radar

ES 202 915-12: December 2006 (Version 1.4.1) Charging SCF (Parlay 4)

(GBSAR)

TR 102 648:Speech processing, transmission

ES 202 915-4-4: December 2006 (Version 1.4.1) Multi-media call control SCF

ES 202 915-13: December 2006 (Version 1.3.1) Policy management SCF (Parlay 4)

(Parlay 4)

ES 202 915-4-5: December 2006 (Version 1.4.1) Conference call control SCF

and quality aspects (STQ). Test methodologies for ETSI test events and results. Test methodologies for ETSI test events

SR 002 564: December 2006 (Version 1.1.1) ETSI/3GPP deliverables to eHealth

TR 102 648-1: December 2006 (Version 1.1.1) VoIP speech quality testing



Speech processing, transmission

Universal mobile

and quality aspects (STQ).

telecommunications system

Development of a reference web

(UMTS). Security aspects of early

page

IP multimedia subsystem (IMS)

Applicability of existing ETSI and

(Parlay 4)

ES 202 915-5: December 2006 (Version 1.4.1) User interaction SCF (Parlay 4)

ES 202 915-6: December 2006 (Version 1.4.1) Mobility SCF (Parlay 4)

ES 202 915-7: December 2006 (Version 1.4.1) Terminal capabilities SCF (Parlay 4)


(3GPP TR 33.978 version 6.6.0

TR 102 513: December 2006 (Version 1.1.1) Terrestrial trunked radio (TETRA).

release 6)

Feasibility study into the

TS 101 456: December 2006 (Version 1.4.2)

implications of operating public

Electronic signatures and

safety sector (PSS) TEDS using

infrastructures (ESI). Policy

the proposed "tuning range"

requirements for certification

concept in the 410 MHz to 430

authorities issuing qualified

MHz and 450 MHz to 470 MHz

certificates

frequency bands

Data session control SCF (Parlay 4)

TS 102 042: December 2006 (Version 1.2.3) Electronic signatures and

ES 202 915-9: December 2006 (Version 1.3.1) Generic messaging SCF (Parlay 4)

infrastructures (ESI). Policy requirements for certification authorities issuing public key certificates


Page 55 of 71

TS 102 165:Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Methods and protocols

TS 102 232-3: December 2006 (Version 2.1.1)

TS 102 462: December 2006 (Version 1.1.1) Satellite earth stations and

Service-specific details for internet

systems (SES). Broadband

access services

satellite multimedia (BSM). QoS functional architecture

TS 102 165-1: December 2006 (Version 4.2.1) Method and proforma for threat, risk, vulnerability analysis

TS 102 232-4: December 2006 (Version 2.1.1) Service-specific details for layer 2


services

Satellite earth stations and systems (SES). Broadband

TS 102 173: December 2006 (Version 1.3.1) Services for computer supported telecommunications applications

TS 102 232-6: December 2006 (Version 2.1.1) PSTN/ISDN services

TS 102 361:Electromagnetic compatibility and



applications (CSTA) phase III (ISO/IEC DIS 18056 Modified)

TS 102 472: December 2006 (Version 1.2.1) Digital video broadcasting (DVB). IP datacast over DVB-H: content delivery protocols

Digital mobile radio (DMR) systems

TS 102 551:-

XML protocol for computer supported telecommunications

General security architecture

Service-specific details for

(CSTA) phase III (ISO/IEC 18051:2000 Modified)

satellite multimedia (BSM).

TS 102 361-1: December 2006 (Version 1.4.1) DMR air interface (AI) protocol

Satellite earth stations and systems (SES). Satellite digital radio (SDR) systems. Inner physical layer of the radio interface

TS 102 182: December 2006 (Version 1.2.1) Emergency communications (EMTEL). Requirements for communications from

TS 102 385:Broadband radio access networks (BRAN). HiperMAN. Conformance testing for WiMAX/HiperMAN 1.2.1

authorities/organizations to individuals, groups or the general public during emergencies

TS 102 551-1: December 2006 (Version 1.1.1) Single carrier transmission


TS 102 551-2: December 2006 (Version 1.1.1) Multiple carrier transmission

Protocol implementation

TS 102 232:Lawful interception (LI). Handover

conformance statement (PICS) proforma

interface and service-specific details (SSD) for IP delivery

TS 102 385-2: December 2006 (Version 2.3.1) Test suite structure and test


purposes (TSS&TP)

Handover specification for IP delivery

TS 102 385-3: December 2006 (Version 2.3.1) Abstract test suite (ATS)

TS 102 232-2: December 2006 (Version 2.1.1) Service-specific details for E-mail

TS 102 558: December 2006 (Version 1.1.1) Methods for testing and specification (MTS). Internet protocol testing (IPT): IPv6 security. Requirements catalogue

TS 102 559: December 2006 (Version 1.1.1) Methods for testing and specification (MTS). Internet protocol testing (IPT): IPv6 mobility. Requirements catalogue

services


Page 56 of 71




Universal mobile

Universal mobile

Universal mobile




(UMTS). Service aspects. Service

(UMTS). Bootstrapping interface

(UMTS). UTRA repeater

principles (3GPP TS 22.101

(Ub) and network application

conformance testing (3GPP TS

version 7.8.0 release 7)

function interface (Ua). Protocol

25.143 version 5.12.0 release 5)

details (3GPP TS 24.109 version

TS 122 234: December 2006 (Version 7.5.0) Universal mobile

6.8.0 release 6)



(UMTS). Requirements on 3GPP

Digital cellular telecommunications

system to wireless local area

system (phase 2+). Universal

network (WLAN) interworking

mobile telecommunications system

(3GPP TS 22.234 version 7.5.0

(UMTS). Messaging using the IP

release 7)

multimedia (IM) core network (CN) subsystem. Stage 3 (3GPP TS

TS 123 060: December 2006 (Version 3.17.0) Digital cellular telecommunications

TS 125 143: December 2006 (Version 6.6.0) (3GPP TS 25.143 version 6.6.0 release 6)





mobile telecommunications system

Universal mobile

(UMTS). General packet radio


service (GPRS). Service

(UMTS). UTRA repeater radio

description. Stage 2 (3GPP TS

transmission and reception (3GPP

23.060 version 3.17.0 release

TS 25.106 version 5.12.0 release

1999)

5)





release 4)

release 6)





release 5)

release 7)




Universal mobile

release 6)

telecommunications system (UMTS). Base station and repeater

TS 125 214: December 2006 (Version 6.11.0) Universal mobile telecommunications system (UMTS). Physical layer procedures (FDD) (3GPP TS 25.214 version 6.11.0 release 6)


TS 125 401: December 2006 (Version 6.9.0) Universal mobile telecommunications system (UMTS). UTRAN overall description (3GPP TS 25.401 version 6.9.0 release 6)


electromagnetic compatibility (EMC) (3GPP TS 25.113 version 7.5.0 release 7)


Page 57 of 71




Universal mobile

Universal mobile

Universal mobile




(UMTS). UTRAN Iub Interface:

(UMTS). UTRAN Iuant interface:

(UMTS). Universal subscriber

general aspects and principles

signalling transport (3GPP TS

identity module (USIM)



conformance test specification

release 7)




release 6)

Universal mobile


TS 131 124: November 2006 (Version 6.7.0)



Universal mobile

(UMTS). UTRAN Iub interface data

remote electrical tilting (RET)


transport and transport signalling

antennas application part (RETAP)

(UMTS). Mobile equipment (ME)

for common transport channel data

signalling (3GPP TS 25.463

conformance test specification.

streams (3GPP TS 25.434 version


Universal subscriber interface

7.1.0 release 7)


module application toolkit (USAT)


conformance test specification (3GPP TS 31.124 version 6.7.0 release 6)

Universal mobile



(UMTS). Characteristics of the

(UMTS). UTRAN Iub interface user

universal subscriber identity


plane protocols for common

module (USIM) application (3GPP

Universal mobile

transport channel data streams

TS 31.102 version 6.16.0 release



6)

(UMTS). 3G security. Security

release 7)


architecture (3GPP TS 33.102


telecommunications system (UMTS). UTRAN Iupc interface general aspects and principles (3GPP TS 25.450 version 7.1.0 release 7)



TS 131 121: November 2006 (Version 6.6.0) Universal mobile telecommunications system (UMTS). UICC-terminal interface.


Universal subscriber identity

Universal mobile

specification (3GPP TS 31.121



system (phase 2+). Universal mobile telecommunications system (UMTS). 3G security. Access security for IP-based services (3GPP TS 33.203 version 7.4.0 release 7)

module (USIM) application test




layer 1 (3GPP TS 25.461 version


7.3.0 release 7)

mobile telecommunications system (UMTS). 3G security. Network domain security (NDS). IP network layer security (3GPP TS 33.210 version 7.2.0 release 7)


Page 58 of 71





(3GPP TS 34.229-2 version 6.0.0



release 6)

system (phase 2+). Mobile radio

mobile telecommunications system (UMTS). Generic authentication architecture (GAA). Generic bootstrapping architecture (3GPP TS 33.220 version 6.11.0 release 6)


interface layer 3 specification.

TS 141 101: December 2006 (Version 6.7.0) Digital cellular telecommunications specifications and technical reports




release 6)

system (phase 2+). General packet radio service (GPRS). Base station


Universal mobile

Security-related network functions



(UMTS). 3G security. Security of

release 4)

system (phase 2+).

multimedia broadcast/multicast version 6.9.0 release 6)

6.20.0 release 6)

for a GERAN-based 3GPP system


service (MBMS) (3GPP TS 33.246

protocol (3GPP TS 44.018 version

system (phase 2+). Technical

(3GPP TS 33.220 version 7.6.0 release 7)

Radio resource control (RRC)

system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (BSSGP) (3GPP TS 48.018 version 5.14.0 release 5)

TS 148 018: December 2006 (Version 6.16.0) (3GPP TS 48.018 version 6.16.0


release 6)


TS 151 010:-

TS 134 229:-

system (phase 2+). Multimedia


Universal mobile

broadcast/multicast service

system (phase 2+). Mobile station


(MBMS) in the GERAN. Stage 2

(MS) conformance specification

(UMTS). Internet protocol (IP)


multimedia call control protocol

release 6)


based on session initiation protocol (SIP) and session description protocol (SDP)



Protocol implementation


proforma specification (3GPP TS

system (phase 2+). Generic

51.010-2 version 7.4.0 release 7)

access to the A/Gb interface.

Protocol conformance specification

Stage 2 (3GPP TS 43.318 version

(3GPP TS 34.229-1 version 5.2.0

6.8.0 release 6)

release 5)


conformance statement (PICS)

TS 151 010-4: November 2006 (Version 4.3.0) Subscriber identity module (SIM)


application toolkit conformance test



Implementation conformance

system (phase 2+). Mobile station -

statement (ICS) specification

base stations system (MS - BSS)

(3GPP TS 34.229-2 version 5.2.0

interface data link (DL) layer

release 5)

specification (3GPP TS 44.006

specification (3GPP TS 51.010-4



Page 59 of 71


IEC 60050:-

Inter-radio-access-technology

vocabulary

IEC 60118:-

International electrotechnical

Electroacoustics. Hearing aids

(RAT) (GERAN / UTRAN) interaction abstract test suite (ATS) (3GPP TS 51.010-5 version 7.4.0 release 7)


IEC 60050-351:2006 (Edition 3) Control technology

IEC 60118-4:2006 (Edition 2)


aid purposes. Magnetic field

Induction loop systems for hearing

GEL/65

Telecommunications and internet

strength £116.80 members, £121.67 non-members

EPL/29

converged services and protocols

IEC 60079:-

for advanced networking

Explosive atmospheres

(TISPAN). NGN lawful interception.

IEC 60155:Glow-starters for fluorescent lamps

Lawful interception functional

IEC 60079-19:2006 (Edition 2)

entities, information flow and reference points

AMENDMENT 2:November 2006 £17.60 members, £18.33 non-members

Equipment repair, overhaul and

CPL/34/1

reclamation £131.20 members, £136.67 non-members

IEC PUBLICATIONS

GEL/31/11

IEC 60027:-

IEC 60269:Low-voltage fuses

Letter symbols to be used in

IEC 60086:-

electrical technology

IEC 60027-4:2006 (Edition 2) Rotating electrical machines £68.80 members, £71.67 non-members

SS/7

Primary batteries

IEC 60269-1:2006 (Edition 4) General requirements

IEC 60086-1:2006 (Edition 10) General


PEL/32


CPL/35 IEC 60027-6:2006

IEC 60269-2:2006 (Edition 3) Supplementary requirements for

Control technology


SS/7

IEC/TS 60034:-

IEC 60086-2:2006 (Edition 11)

fuses for use by authorised

Physical and electrical

application). Examples of

specifications £131.20 members, £136.67 non-members

standardized systems of fuses A to

persons (fuses mainly for industrial

CPL/35

Rotating electrical machines

I £193.60 members, £201.67 non-members

PEL/32 IEC 60095:Lead-acid starter batteries

IEC/TS 60034-27:2006 Off-line partial discharge off-line measurements on the stator

IEC 60095-1:2006 (Edition 7)

winding insulation of rotating electrical machines £131.20 members, £136.67 non-members

General requirements and test

PEL/2

methods £84.80 members, £88.33 non-members

PEL/21

IEC PUBLICATIONS

Page 60 of 71

IEC 60269-3:2006 (Edition 3)

IEC 60317-0-6:-

IEC/TS 60479-1:-

Glass-fibre wound resin or varnish

General aspects

Supplementary requirements for

impregnated, bare or enamelled

CORRIGENDUM 1:October 2006

fuses for use by unskilled persons

round copper wire AMENDMENT 1:October 2006

(fuses mainly for household or

JPEL/64


similar application). Examples of standardized systems of fuses A to

IEC 60601:-

GEL/55

F £192.00 members, £200.00 non-members

PEL/32

Medical electrical equipment

IEC 60335:-

IEC 60601-1:-

Household and similar electrical

General requirements for basic

appliances. Safety

safety and essential performance CORRIGENDUM 1:December 2006

IEC 60269-4:2006 (Edition 4)

CH/62/1

Supplementary requirements for

IEC 60335-2-35:-

fuse-links for the protection of


semiconductor devices £131.20 members, £136.67 non-members

instantaneous water heaters AMENDMENT 1:October 2006

PEL/32

IEC 60601-1-6:2006 (Edition 2) General requirements for basic


CPL/61/07 IEC 60287:-

safety and essential performance. Collateral standard: usability £155.20 members, £161.67 non-members

IEC 60384:-

Electric cables. Calculation of the

CH/62/1

Fixed capacitors for use in

current rating

electronic equipment

IEC/TR 60728:Cable networks for television

IEC 60287-1-1:2006 (Edition 2)

IEC 60384-3:2006 (Edition 3)

Current rating equations (100 %

signals, sound signals and interactive services

Sectional specification: surface

load factor) and calculation of

mount fixed tantalum electrolytic

losses. General £92.80 members, £96.67 non-members

GEL/20/16

capacitors with manganese dioxide

IEC/TR 60728-6-1:2006

solid electrolyte £84.80 members, £88.33 non-members

System guidelines for analogue

EPL/40X

optical transmission systems £116.80 members, £121.67 non-members

EPL/100

IEC 60317:Specifications for particular types of winding wires

IEC 60384-3-1:2006 (Edition 2)

IEC 60825:-

Blank detail specification: surface

Safety of laser products

IEC 60317-0:-

mount fixed tantalum electrolytic


capacitors with manganese dioxide

IEC 60317-0-5:2006 (Edition 2)

solid electrolyte. Assessment level

IEC 60825-2:-

EZ £46.40 members, £48.33 non-members

Safety of optical fibre

EPL/40X

Glass-fibre braided resin or varnish impregnated, bare or enamelled


EPL/76

rectangular copper wire £68.80 members, £71.67 non-members

IEC/TS 60479:Effects of current on human beings

GEL/55

IEC PUBLICATIONS

communication systems AMENDMENT 1:November 2006

and livestock

Page 61 of 71

IEC/TR 60825-8:2006 (Edition 2)

IEC 60947:Low-voltage switchgear and

IEC 61000-4-20:-

Guidelines for the safe use of laser

controlgear

Emission and immunity testing in

beams on humans £100.80 members, £105.00 non-members

transverse electromagnetic (TEM)

EPL/76

waveguides AMENDMENT 1:November 2006

IEC 60947-4-2:-


Contactors and motor-starters. A.C. semiconductor motor

GEL/210/12

controllers and starters AMENDMENT 2:November 2006

IEC 60874:Connectors for optical fibres and


cables

PEL/17/2 IEC 60874-1:2006 (Edition 5) General specification

IEC 60947-5-9:2006


switching elements. Flow rate

IEC 61025:2006 (Edition 2) Fault tree analysis (FTA) £131.20 members, £136.67 non-members

DS/1


GEL/86/2

switches £92.80 members, £96.67 non-members

IEC 61061:Non-impregnated densified

PEL/17/2

IEC 60874-1-1:2006 (Edition 2) Blank detail specification

laminated wood for electrical purposes

IEC 61000:-


IEC 61061-1:2006 (Edition 3)


GEL/86/2

(EMC)

IEC 60915:2006 (Edition 2)

IEC/TR 61000-2-14:2006

Fixed capacitors for use in

pubic electricity distribution

electronic equipment. Preferred

networks £116.80 members, £121.67 non-members

Definitions, designation and general requirements £25.60 members, £26.67 non-members

Environment. Overvoltages on

dimensions of shaft ends, bushes and for the mounting of single hole,

GEL/15/3/6

IEC 61161:2006 (Edition 2)

GEL/210/8

bush-mounted, shaft-operated

Ultrasonics. Power measurement. Radiation force balances and

electronic components £51.20 members, £53.33 non-members

performance requirements £116.80 members, £121.67 non-members

IEC 61000-4:-

EPL/40X

Testing and measurement techniques

EPL/87

IEC 60938:IEC 61000-4-1:2006 (Edition 3) Overview of IEC 61000-4 series

Fixed inductors for electromagnetic interference suppression

IEC 61169:Radio-frequency connectors


IEC 60938-2:-

GEL/210/12

Sectional specification

AMENDMENT 1:October 2006 £41.60 members, £43.33 non-members

IEC 61000-4-18:2006

EPL/40X

Damped oscillatory wave immunity test £100.80 members, £105.00 non-members

GEL/210/12

IEC PUBLICATIONS

Page 62 of 71

IEC 61169-16:2006

IEC 61340:-

Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristics impedance 50

IEC 61300-2-26:2006 (Edition 2) Salt mist

Electrostatics


IEC 61340-3:-

GEL/86/2

ohms (75 Ohms) (type N) £92.80 members, £96.67 non-members

EPL/46/2

IEC 61300-2-37:2006 (Edition 2)

Human body model (HBM)

closures £32.00 members, £33.33 non-members

Evaluation and routine testing in

GEL/86/2

medical imaging departments

IEC 61300-3:-

IEC 61223-2-6:2006 (Edition 2)

discharge test waveforms £35.20 members, £36.67 non-members

IEC 61300-3-10:2006 (Edition 2) Gauge retention force

tomography X-ray equipment £92.80 members, £96.67 non-members

CH/62/2

GEL/101


GEL/86/2 IEC/TR 61282:IEC 61300-3-14:2006 (Edition 2)

design guides

IEC/TR 61282-3:2006 (Edition 3) Calculation of link polarization mode dispersion £92.80 members, £96.67 non-members

Accuracy and repeatability of the

IEC 61400-25:-

attenuation settings of a variable

Communications for monitoring

attenuator £38.40 members, £40.00 non-members

and control of wind power plants

GEL/86/2

IEC 61400-25-1:2006 Overall description of principles

GEL/86/3

Dome eccentricity of a convex

Calculating dispersion penalty from

polished ferrule endface £35.20 members, £36.67 non-members

measured time-resolved chirp data £64.00 members, £66.67 non-members

and models £92.80 members, £96.67 non-members

IEC 61300-3-15:2006 (Edition 2)

IEC/TR 61282-8:2006

PEL/88

IEC 61400-25-2:2006

GEL/86/2

Information models


GEL/86/3

test and measurement procedures

IEC 61400:Wind turbines

Fibre optic communication system

and passive components. Basic

GEL/101

Machine model (MM) electrostatic

performance of computed

Fibre optic interconnecting devices

electrostatic discharge waveforms £38.40 members, £40.00 non-members

IEC 61340-3-2:2006 (Edition 2)

Examinations and measurements

Constancy tests. Imaging

IEC 61300:-

electrostatic effects

IEC 61340-3-1:2006 (Edition 2)

Cable bending for fibre optic

IEC 61223:-

Methods for simulation of

PEL/88

IEC 61300-3-24:2006 (Edition 2) Keying accuracy of optical connectors for polarization

IEC 61400-25-3:2006

maintaining fibre £38.40 members, £40.00 non-members


Information exchange models

GEL/86/2

PEL/88

IEC 61300-2:Tests IEC PUBLICATIONS

Page 63 of 71

IEC 61400-25-5:2006

IEC/TS 62045:-

Conformance testing

IEC/TR 61804:-

Multimedia security. Guideline for


Function blocks (FB) for process

privacy protection of equipment

control

and systems in and out of use

IEC/TR 61804-4:2006

IEC/TS 62045-1:2006

EDD interoperability guideline

General



PEL/88

IEC 61672:Electroacoustics. Sound level meters

AMT/7

EPL/100

IEC 61672-3:2006 Periodic tests

IEC 61937:-

IEC 62056:-


Digital audio. Interface for

Electricity metering. Data

non-linear PCM encoded audio

exchange for meter reading, tariff

bitstreams applying IEC 60958

and load control

IEC 61937-8:2006

IEC 62056-46:-

Non-linear PCM bitstreams

Data link layer using HDLC

according to the windows media

protocol AMENDMENT 1:December 2006

EPL/29

IEC 61753:Fibre optic interconnecting devices and passive components performance standard

audio (WMA) professional format £41.60 members, £43.33 non-members

IEC 61753-101-3:2006


PEL/13

EPL/100

Fibre management systems for category U. Uncontrolled environment £76.80 members, £80.00 non-members

GEL/86/2

IEC/TR 61948:-

IEC 62056-47:2006

Nuclear medicine instrumentation.

COSEM transport layers for IPv4

Routine tests

networks £100.80 members, £105.00 non-members

PEL/13

IEC/TR 61948-4:2006

IEC 61788:-

Radionuclide calibrators

Superconductivity


CH/62/3 IEC 61788-2:2006 (Edition 2) Critical current measurement. DC

IEC 61987:-

critical current of Nb3Sn composite

Industrial-process measurement

superconductors £100.80 members, £105.00 non-members

and control. Data structures and

L/-/90

IEC 62056-53:2006 (Edition 2) COSEM application layer £192.00 members, £200.00 non-members

PEL/13

elements in process equipment

IEC 62153:-

catalogues

Metallic communication cable test methods

IEC 61987-1:2006

IEC 61788-7:2006 (Edition 2) Electronic characteristic measurements. Surface resistance of superconductors at microwave

Measuring equipment with

IEC 62153-4-8:2006

analogue and digital output £116.80 members, £121.67 non-members

Electromagnetic compatibility (EMC). Capacitive coupling

GEL/65/2

frequencies £92.80 members, £96.67 non-members

admittance £35.20 members, £36.67 non-members

EPL/46 L/-/90

IEC PUBLICATIONS

Page 64 of 71

IEC 62257:-

IEC 62343-1-3:2006

IEC/TR 62461:2006

Recommendation for small

Performance standards. Dynamic

Radiation protection

renewable energy and hybrid

gain tilt equalizer with pigtails for

instrumentation. Determination of

systems for rural electrification

use in controlled environments

uncertainty in measurement £116.80 members, £121.67 non-members

IEC 62257-7-1:2006

(category C) £41.60 members, £43.33 non-members

NCE/2 GEL/86/3

Generators. Photovoltaic arrays


IEC CISPR 15:-

GEL/82

IEC 62271:High-voltage switchgear and

IEC 62347:2006

Limits and methods of

Guidance on system dependability

measurement of radio disturbance

specifications £92.80 members, £96.67 non-members

characteristics of electrical lighting

DS/1

controlgear

and similar equipment AMENDMENT 1:October 2006


GEL/210/11 IEC 62271-300:2006

IEC/TR 62350:2006

Seismic qualification of alternating

Guide on the correct use of

current circuit-breakers £76.80 members, £80.00 non-members

protective devices (RCDs) for

residual current-operated

PEL/17/1

IEC/PAS PUBLICATIONS

household and similar use £84.80 members, £88.33 non-members

IEC/PAS 62500:2006 Process management for avionics.

PEL/23/1 IEC 62337:2006 Commissioning of electrical,

Electrical and instrumentation loop

systems in the process industry.

highly accelerated tests in avionic systems £92.80 members, £96.67 non-members

IEC 62382:2006

instrumentation and control

Guide for defining and performing

GEL/107

check £64.00 members, £66.67 non-members

Specific phases and milestones £84.80 members, £88.33 non-members

GEL/65

GEL/65

ISO PUBLICATIONS ISO 180:-

IEC 62339:-

IEC 62392:2006

Plastics. Determination of Izod

Modular component interfaces for

Suitability of typical electrical

impact strength AMENDMENT 1:December 2006

insulating material (EIM) for

surface-mount fluid distribution


polymer recycling £64.00 members, £66.67 non-members

components

PRI/21 GEL/15

IEC 62339-1:2006 Elastomeric seals

ISO 839:-


GEL/65/4

IEC/TS 62441:2006

Milling machine arbors with 7/24

Accidentally caused candle flame

tapers

ignition for audio/video, communication and information

IEC 62343:Dynamic modules

ISO 839-1:2006 (Edition 2) Dimensions

technology equipment £32.00 members, £33.33 non-members

EPL/108


MTE/5

ISO PUBLICATIONS

Page 65 of 71

ISO 845:2006 (Edition 3)


ISO 5418-1:2006 (Edition 2)

Cellular plastics and rubbers.

Milling cutters with tenon drive.

2,2'-biquinolyl spectrophotometric

Determination of apparent density £30.40 members, £31.67 non-members

Interchangeability dimensions for

method £51.20 members, £53.33 non-members

PRI/72

cutter arbors. Metric series £35.20 members, £36.67 non-members

ISE/58 MTE/5


ISO 5418-2:2006

Brown coals and lignites.


Determination of acetone- soluble

Road vehicles. Fifth wheels.

material (resinous substances) in

Interchangeability £40.00 members, £41.67 non-members

the benzene-soluble extract £30.40 members, £31.67 non-members

Flame atomic absorption spectrophotometric method £51.20 members, £53.33 non-members

ISE/58 AUE/13 ISO 5659:-

PTI/16

Plastics. Smoke generation



Milk and milk products.

Paints and varnishes. Pendulum

Specification of Mojonnier-type fat

damping test £46.40 members, £48.33 non-members

extraction flasks £35.20 members, £36.67 non-members

ISO 5659-2:2006 (Edition 2) Determination of optical density by

STI/10

AW/5

a single-chamber test £94.40 members, £98.33 non-members

PRI/26 ISO 1739:2006 (Edition 2)


ISO 5667:-

Butter. Determination of the

Shipbuilding. Sea-going vessels.

Water quality. Sampling

refractive index of the fat

Windlasses and anchor capstans £46.40 members, £48.33 non-members

(reference method) £30.40 members, £31.67 non-members

SME/32/4 AW/5

Guidance on sampling programmes and techniques £86.40 members, £90.00 non-members

ISO 4869:Acoustics. Hearing protectors


ISO 5667-1:2006 (Edition 2)

EH/3/6

Technical drawings. Geometrical tolerancing. Maximum material

ISO 4869-2:-

requirement, minimum material

Estimation of effective A-weighted

ISO 6070:-

requirement, reciprocity

sound pressure levels when

Auxiliary tables for vibration

requirement £86.40 members, £90.00 non-members

hearing protectors are worn CORRIGENDUM 1:September 2006

generators. Methods of describing

PH/7

equipment characteristics CORRIGENDUM 1:September 2006

GME/21

TDW/4 ISO 5418:Iron ores. Determination of copper

ISO 6993:-

content

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels

ISO PUBLICATIONS

Page 66 of 71

ISO 6993-2:2006

ISO/IEC 8824:-

ISO 9096:-

Fittings at a maximum operating

Information technology. Abstract

Stationary source emissions.

pressure of 200 mbar (20 kPa) £64.00 members, £66.67 non-members

syntax notation one (ASN.1)

Manual determination of mass

PRI/88/2/P6

concentration of particulate matter CORRIGENDUM 1:December 2006

EH/2/1

ISO/IEC 8824-1:Specification of basic notation


ISO 7500:-

ISO 9682:-


Metallic materials. Verification of

IST/6

static uniaxial testing machines

ISO 7500-2:2006 (Edition 2)

ISO/IEC 8824-2:-

Tension creep testing machines.

CORRIGENDUM 1:December 2006

Periodate spectrophotometric

IST/6

ISE/NFE/4/1

manganese content

ISO 9682-2:2006

Information object specification

Verification of the force applied £64.00 members, £66.67 non-members

Iron ores. Determination of

method £56.00 members, £58.33 non-members

ISE/58

ISO/IEC 8825:Encoding rules

ISO 9683:-

ISO 8510:Adhesives. Peel test for a

ISO/IEC 8825-3:-

flexible-bonded-to-rigid test

Specification of encoding control

specimen assembly

notation (ECN) AMENDMENT 2:December 2006

Iron ores. Determination of vanadium content

ISO 9683-1:2006


ISO 8510-2:2006 (Edition 2) 180$0D peel

BPHA spectrophotometric method

IST/6


ISE/58


ISO/IEC 8825-4:-

PRI/52

ISO/IEC 8802:-

Information technology. ASN.1 encoding rules: XML encoding


rules (XER) AMENDMENT 2:December 2006

Passenger cars. Power-off reaction of a vehicle in a turn. Open-loop


Information technology. Telecommunications and

IST/6

information exchange between

test method £73.60 members, £76.67 non-members

AUE/15

systems. Local and metropolitan area networks. Specific

ISO 8873:-

requirements


ISO 10303:-

Spray-applied polyurethane foam

Industrial automation systems and integration. Product data

ISO/IEC 8802-11:Wireless LAN medium access

ISO 8873-1:2006

control (MAC) and physical layer

Material specifications

(PHY) specifications. Amendment


6: Medium access AMENDMENT 6:December 2006

representation and exchange

ISO 10303-112:2006

PRI/72

Integrated application resource: modelling commands for the


IST/6

exchange of procedurally represented 2D CAD models £124.80 members, £130.00 non-members

AMT/4 ISO PUBLICATIONS

Page 67 of 71

ISO 11898-3:ISO 10303-503:-

Low-speed, fault-tolerant,

Application interpreted construct:

medium-dependent interface CORRIGENDUM 1:December 2006

geometrically bounded 2D

ISO 14224:2006 (Edition 2) Petroleum, petrochemical and natural gas industries. Collection

AUE/16

wireframe CORRIGENDUM 1:December 2006

and exchange of reliability and maintenance data for equipment £160.00 members, £166.67 non-members

AMT/4 ISO 11962:-

PSE/17

Micrographics. Image mark (blip)

ISO 10535:2006 (Edition 2)

used with 16 mm and 35mm roll microfilm CORRIGENDUM 1:December 2006

Hoists for the transfer of disabled

IDT/1/2

persons. Requirements and test

ISO 14229:2006 (Edition 2) Road vehicles. Unified diagnostic

methods £110.40 members, £115.00 non-members

services (UDS). Specification and

ISO 13041:-

CH/173/-/6

requirements £198.40 members, £206.67 non-members

Test conditions for numerically controlled turning machines and

AUE/16

turning centres

ISO 10813:Vibration generating machines. Guidance for selection

ISO/IEC 14496:-

ISO 13041-5:2006

Information technology. Coding of

Accuracy of feeds, speeds and

audio-visual objects

interpolations £46.40 members, £48.33 non-members

ISO 10813-1:Equipment for environmental

MTE/1

testing CORRIGENDUM 1:December 2006

Animation framework extension

GME/21/2

(AFX) £168.00 members, £175.00 non-members

ISO 13584:Industrial automation systems and

ISO 11535:2006 (Edition 2)

ISO/IEC 14496-16:2006 (Edition 2)

integration. Parts library

IST/37

Iron ores. Determination of various elements. Inductively coupled

ISO 13584-511:2006

plasma atomic emission

Mechanical systems and

spectrometric method £76.80 members, £80.00 non-members

components for general use.

ISE/58

ISO 14505:Ergonomics of the thermal environment. Thermal environment

Reference dictionary for fasteners £168.00 members, £175.00 non-members

in vehicles

AMT/4 ISO 11565:2006 (Edition 2)

Determination of equivalent temperature £76.80 members, £80.00 non-members

ISO 13994:-

Road vehicles. Spark plugs. Test

Clothing for protection against

methods and requirements £46.40 members, £48.33 non-members

liquid chemicals. Determination of

PH/9/1

the resistance of protective clothing

MCE/9

materials to penetration by liquids under pressure CORRIGENDUM 1:October 2006

ISO 11898:Road vehicles. Controller area network (CAN)

ISO 14505-2:2006

ISO 14890:-

PH/3/3

Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use CORRIGENDUM 1:November 2006

PRI/67

ISO PUBLICATIONS

Page 68 of 71

ISO 15071:-

ISO 15901-2:2006

ISO 17775:2006

Hexagon bolts with flange. Small

Analysis of mesopores and

Aircraft. Ground service

series. Product grade A CORRIGENDUM 1:December 2006

macropores by gas adsorption £86.40 members, £90.00 non-members

connections. Potable water,

FME/9/3

LBI/37

toilet-flush water and toilet drain £30.40 members, £31.67 non-members

ACE/69 ISO 15072:Hexagon bolts with flange with

ISO 16100:-

metric fine pitch thread. Small

Industrial automation systems and

ISO/TR 18124:2006

series. Product grade A CORRIGENDUM 1:December 2006

integration. Manufacturing software

Plastics piping systems. Multilayer

capability profiling for

M (metal) pipes. Test method for

interoperability

strength of the weld line in the

FME/9/3

metal layer and bonding between

ISO/IEC 15444:-

ISO 16100-4:2006

Information technology. JPEG

Conformance test methods, criteria

2000 image coding system

and reports £86.40 members, £90.00 non-members

layers by use of a cone £35.20 members, £36.67 non-members

PRI/88/4

AMT/5

ISO/IEC 15444-9:-

ISO 18909:Photography. Processed

Interactivity tools, APIs and protocols AMENDMENT 1:December 2006

photographic colour films and

ISO 16234:2006

paper prints. Methods for

Heavy commercial vehicles and


IST/37

measuring image stability CORRIGENDUM 1:December 2006

buses. Straight ahead braking on

CPW/42

surfaces with split coefficient of friction. Open test method £60.80 members, £63.33 non-members

ISO 15662:2006 Intelligent transport systems. Wide

ISO 19092:-

AUE/15

Financial services. Biometrics

area communication. Protocol management information £89.60 members, £93.33 non-members

EPL/278

ISO 16792:2006

ISO 19092-1:2006

Technical product documentation

Security framework

(TPD). Digital product definition,


data practices £134.40 members, £140.00 non-members

ISO/IEC 15693:Identification cards. Contactless

IST/12 TDW/4 ISO/IEC 19798:2006

integrated circuit cards. Vicinity cards

Method for the determination of

ISO/IEC 17345:2006 (Edition 2) ISO/IEC 15693-2:2006 (Edition 2) Air interface and initialization

Information technology. Data


density optical (UDO) disk

Pore size distribution and porosity of solid materials by mercury

electrophotographic printers and multi-function devices that contain

interchange on 130 mm rewritable

printer components £64.00 members, £66.67 non-members

and write once read many ultra

IST/17

ISO 15901:-

toner cartridge yield for colour

IST/3

cartridges. Capacity: 30 Gbytes per cartridge. First generation £160.00 members, £166.67 non-members

ISO/IEC 21000:-

ICT/-/1

Information technology. Multimedia framework (MPEG-21)

porosimetry and gas adsorption

ISO PUBLICATIONS

Page 69 of 71

ISO/IEC 21000-6:-

ISO 22489:2006

Rights data dictionary. Amendment

Microbeam analysis. Electron

1: Digital item identifier relationship

probe microanalysis. Quantitative

types AMENDMENT 1:December 2006

point analysis for bulk specimen

ISO/IEC 23360-5:2006 Specification for PPC32


using wavelength dispersive X-ray


IST/37

IST/5

spectroscopy £56.00 members, £58.33 non-members

CII/9

ISO/IEC 23002:-

Amendment 1: Additional C++

Information technology. MPEG

bindings AMENDMENT 1:December 2006

video technologies

Specification for PPC64


ISO/IEC 21000-10:Digital item processing.

ISO/IEC 23360-6:2006

IST/5

ISO/IEC 23360-7:2006


Specification for S390

IST/37

ISO/IEC 23002-1:2006


Accuracy requirements for

IST/5

implementation of integer-output

ISO 21078:-

8x8 inverse discrete cosine

Determination of boron (III) oxide in

transform £51.20 members, £53.33 non-members

refractory products

ISO/IEC 23360-8:2006 Specification for S390X

IST/37 ISO 21078-2:2006 Acid extraction method for the

architecture £124.80 members, £130.00 non-members

IST/5

ISO/IEC 23360:-

determination of boron (III) oxide in

Linux standard base (LSB) core

binder components £46.40 members, £48.33 non-members

specification 3.1

RPI/1

ISO 21487:2006 Small craft. Permanently installed

ISO/IEC 24711:2006 Method for determination of ink

ISO/IEC 23360-1:2006

cartridge yield for colour inkjet

Generic specification

printers and multi-function devices


that may contain printer

IST/5

petrol and diesel fuel tanks £40.00 members, £41.67 non-members

components £81.60 members, £85.00 non-members

IST/3 GME/33

ISO/IEC 23360-2:2006 Specification for IA32

ISO/IEC 24712:2006


ISO 21849:2006

IST/5

Aircraft and space. Industrial data.

ISO/IEC 23360-3:2006 Specification for IA64

ACE/1

of office equipment consumable yield £81.60 members, £85.00 non-members

Product identification and traceability £110.40 members, £115.00 non-members

Colour test pages for measurement

IST/3


IST/5

ISO/IEC 24738:2006 Information technology. Icon symbols and functions for

ISO/IEC 23360-4:2006

multimedia link attributes £68.80 members, £71.67 non-members

Specification for AMD64


IST/5

ISO PUBLICATIONS

ICT/-/1

Page 70 of 71

ISO/IEC 25436:2006 Information technology. Eiffel: analysis, design and programming language £160.00 members, £166.67 non-members

IST/5

ISO/IEC 26300:2006 Information technology. Open document format for office applications (open document) v1.0 £241.60 members, £251.67 non-members

IST/41

ISO/IEC/TR 26927:2006 Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Mobility for enterprise communications £84.80 members, £88.33 non-members

IST/6

ISO/IEC GUIDE 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation £86.40 members, £90.00 non-members

GEL/3

ISO/PAS PUBLICATIONS ISO/PAS 11154:2006 Road vehicles. Roof load carriers


AUE/9

ISO/PAS PUBLICATIONS

Page 71 of 71