Update Standards - February 2008 - BSI Shop

British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

BS ISO 10185 .....................................................22

BS EN ISO 5826 ..................................................24

BS ISO 22716 .....................................................17

BS EN 10028 ......................................................11

DD ISO/TS 21872 ................................................18

BS EN 10273 ......................................................11

Building and civil engineering

Electrotechnical

BS EN ISO 10424 ................................................11

BS 874 ................................................................22

BS 4177 ..............................................................20

BS EN ISO 10440 ................................................11

BS 1192 ..........................................................8, 22

BS 5049 ..............................................................21

BS EN 12070 ................................................12, 23

BS 5268 ..............................................................20

BS 8491 ................................................................8

BS EN ISO 12224 ................................................24

BS 5756 ..............................................................20

BS EN 13757 ......................................................24

BS EN 13411 ......................................................24

BS 5930 ..............................................................20

BS EN 50463 ......................................................14

BS EN 13414 ......................................................24

BS 6297 ................................................................8

BS EN 50494 ......................................................14

BS EN 13611 ......................................................11

DD CEN/TS 1099 ................................................23

BS EN 50497 ......................................................14

DD CEN/TS 12872 ..............................................23

BS EN 60062 ......................................................19

DD CEN/TS 15676 ..............................................18

BS EN 60191 ......................................................14

DD CEN/TS 15680 ..............................................18

BS EN 60423 ......................................................14

BS EN 1308 ........................................................10

BS EN 60512 ......................................................19

BS EN 1323 ........................................................10

BS EN 60598 ......................................................19

BS EN 1324 ........................................................10

BS EN 60664 ......................................................14

BS EN 1346 ........................................................10

BS EN 60745 ......................................................20

BS EN 1347 ........................................................10

BS EN 61000 ......................................................20

BS EN 1348 ........................................................10

BS EN 61023 ......................................................14

BS EN 1992 ........................................................15

BS EN 61076 ......................................................14

BS EN 1994 ........................................................15

BS EN 61157 ......................................................14

BS EN 1997 ........................................................20

BS EN 61188 ......................................................14

BS EN ISO 8990 ..................................................22

BS EN 61193 ......................................................14

BS EN 12004 ......................................................11

BS EN 61338 ......................................................20

BS EN 12151 ......................................................11

BS EN 61557 ......................................................14

BS EN 12566 ......................................................11

BS EN 61558 ......................................................14

BS EN 12767 ......................................................11

BS EN 61689 ......................................................14

BS EN 13915 ......................................................11

BS EN 61753 ..........................................14, 15, 23

BS EN 13924 ......................................................20

BS EN 61850 ......................................................15

BS EN 14389 ......................................................11

BS EN 61937 ......................................................15

BS EN 14891 ......................................................12

BS EN 62104 ......................................................20

BS EN 15027 ......................................................12

BS EN 62379 ......................................................15

DD ENV 1099 .....................................................23

BS EN 62421 ......................................................15

DD ENV 12872 ...................................................23

BS IEC 62525 ......................................................18

PD 6696 .............................................................18

BS IEC 62526 ......................................................18

PAS 24 ..........................................................19, 24

BS IEC 62527 ......................................................18

BS EN ISO 10405 ................................................15

BS IEC 62528 ......................................................18

Consumer products and services

BS IEC 62529 ......................................................18

BS 1133 ..............................................................21

BS IEC 62530 ......................................................18

BS 1262 ..............................................................21

BS IEC 62531 ......................................................18

BS 1918 ..............................................................21

DD IEC/PAS 61755 ..............................................18

BS 2049 ..............................................................23

DD IEC/PAS 62396 ..............................................19

BS 2892 ..............................................................21 BS 3882 ..............................................................19

Engineering

BS EN 13831 ......................................................11 BS EN 14459 ................................................11, 23 BS EN 14511 ................................................11, 12 BS EN ISO 15138 ................................................12 BS EN 15459 ......................................................12 BS EN 15495 ......................................................12 BS EN ISO 17652 ................................................25 BS EN ISO 21952 ..........................................12, 23 BS EN ISO 22435 ................................................12 DD ENV 1954 ...............................................11, 23 BS ISO 702 .........................................................15 BS ISO 2490 .......................................................15 BS ISO 3070 .......................................................23 BS ISO 3271 .......................................................15 BS ISO 4252 .......................................................15 BS ISO 4695 .......................................................15 BS ISO 4696 .................................................15, 16 BS ISO 4698 .......................................................16 BS ISO 4960 .......................................................16 BS ISO 5415 .......................................................16 BS ISO 5954 .......................................................16 BS ISO 6621 .................................................16, 23 BS ISO 7215 .......................................................16 BS ISO 7992 .......................................................16 BS ISO 8371 .......................................................16 BS ISO 10285 ...............................................16, 23 BS ISO 10405 .....................................................15 BS ISO 10907 .....................................................16 BS ISO 11256 .....................................................16 BS ISO 11257 .....................................................16 BS ISO 11258 .....................................................16 BS ISO 11565 .....................................................20 BS ISO 11783 .....................................................16 BS ISO 13347 .....................................................22 BS ISO 13930 .....................................................16 BS ISO 17066 .....................................................17

BS 5381 ..............................................................21

BS 848 ................................................................22

BS ISO 17355 .....................................................17

BS 5979 ..............................................................19

BS 1580 ..........................................................8, 22

BS ISO 19933 .....................................................17

BS 6069 ........................................................15, 23

BS 5341 ........................................................16, 23

BS ISO 20858 ...............................................17, 23

BS 6118 ..............................................................21

BS 6400 ................................................................8

BS ISO 21349 .....................................................17

BS 6119 ..............................................................21

BS 7637 ........................................................16, 23

BS ISO 22538 .....................................................17

BS 7367 ..............................................................21

BS 7833 ..............................................................21

BS ISO 24497 .....................................................17

BS 7488 ..............................................................21

BS 7882 ................................................................8

BS ISO 28000 ...............................................17, 23

BS 8404 ..............................................................21

BS 8666 ..............................................................20

BS ISO 28001 ...............................................18, 23

BS 8474 ..............................................................20

BS EN 88 ..............................................................8

BS ISO 28003 ...............................................18, 23

BS EN ISO 661 ....................................................19

BS EN 230 ..........................................................23

BS ISO 28004 ...............................................18, 23

BS EN ISO 3657 ..................................................21

BS EN 560 ..........................................................19

BS IEC 62118 ......................................................23

BS EN ISO 8420 ..................................................21

BS EN 1124 ........................................................10

DD ISO/PAS 28000 ........................................17, 23

BS EN 14123 ......................................................11

BS EN 1151 ........................................................19

DD ISO/PAS 28001 ........................................18, 23

BS EN ISO 19219 ................................................21

BS EN 3375 ........................................................10

DD ISO/PAS 28003 ........................................18, 23

BS ISO 4226 .................................................15, 23

BS EN 3475 ........................................................10

DD ISO/PAS 28004 ........................................18, 23

BS ISO 6656 .......................................................21

BS EN 3909 ........................................................10

PD ISO/PAS 20858 ........................................17, 23

BS ISO 9512 .......................................................22

BS EN 4008 ........................................................10

PD ISO/TR 23462 ................................................18

BS ISO 10135 .....................................................16

BS EN 4604 ........................................................10

BS 9F 1 ...............................................................22

4

Prices may be subject to change.

Update Standards Feb 2008

British Standards - Quick Reference Guide continued... BS 7F 8 ...............................................................22

DD CEN/TS 13763 ..............................................25

BS 5979 ..............................................................19

BS 7F 34 .............................................................22

DD CEN/TS 14495 ........................................12, 23

BS 6068 ........................................................16, 23

BS 5F 54 .............................................................22

BS EN ISO 216 ......................................................8

BS 6069 ........................................................15, 23

BS 6F 55 .............................................................22

BS EN 993 ......................................................8, 23

BS 6118 ..............................................................21

BS 5F 58 .............................................................22

BS EN 1007 ..........................................................8

BS 6119 ..............................................................21

BS 6F 100 ...........................................................22

BS EN 1071 ..................................................10, 23

BS 6297 ................................................................8

BS 5F 120 ...........................................................22

BS EN 1434 ........................................................19

BS 6400 ................................................................8

BS 2F 127 ...........................................................22

BS EN ISO 1856 ..................................................20

BS 6723 ..........................................................8, 23

BS 2F 128 ...........................................................22

BS EN ISO 5398 ..................................................10

BS 7273 ..............................................................21

BS 2F 132 ...........................................................22

BS EN ISO 8307 ..................................................10

BS 7367 ..............................................................21

BS F 133 .............................................................22

BS EN 13630 ......................................................24

BS 7453 ..............................................................21

BS 2F 134 ...........................................................22

BS EN 13631 ......................................................24

BS 7488 ..............................................................21

BS 3F 135 ...........................................................22

BS EN 13763 ......................................................24

BS 7637 ........................................................16, 23

BS F 139 .............................................................22

BS EN 13857 ......................................................25

BS 7833 ..............................................................21

BS 2F 142 ...........................................................22

BS EN 13938 ......................................................25

BS 7882 ................................................................8

BS F 156 .............................................................20

BS EN 14682 ......................................................12

BS 7907 ................................................................8

BS 6SP 4 .............................................................20

BS EN ISO 15013 ................................................12

BS 8404 ..............................................................21

BS SP 114 ...........................................................20

BS EN ISO 15015 ................................................12

BS 8474 ..............................................................20

BS EN 15416 ......................................................12

BS 8491 ................................................................8

Health and environment

BS EN 15469 ......................................................12

BS 8666 ..............................................................20

BS 1756 ..............................................................22

BS EN 15470 ......................................................12

BS 8723 ..........................................................8, 23

BS 1929 ..............................................................22

BS EN 15471 ......................................................12

BIP 0027 .............................................................19

BS 2742 ..............................................................23

BS EN ISO 17075 ..........................................12, 23

BIP 2130 .............................................................19

BS 5283 ..............................................................23

BS EN ISO 21183 ................................................15

BIP 2142 .............................................................19

BS 6068 ........................................................16, 23

BS EN ISO 26082 ................................................12

BIP 2145 .............................................................19

BS 6069 ........................................................15, 23

DD ENV ISO 8502 ...............................................22

DD CEN/TS 993 ..............................................8, 23

BS 7273 ..............................................................21

DD ENV 1071 ...............................................10, 23

DD CEN/TS 1099 ................................................23

BS EN 740 ..........................................................11

BS ISO 8188 .......................................................16

DD CEN/TS 12872 ..............................................23

BS EN 966 ..........................................................21

BS ISO 9587 .......................................................16

DD CEN/TS 13763 ..............................................25

BS EN 1078 ........................................................21

BS ISO 13226 .....................................................20

DD CEN/TS 14495 ........................................12, 23

BS EN 1384 ........................................................21

BS ISO 15105 .....................................................16

DD CEN/TS 15676 ..............................................18

BS EN 1385 ........................................................21

BS ISO 15527 .....................................................17

DD CEN/TS 15680 ..............................................18

BS EN ISO 6360 ..................................................10

BS ISO 17751 .....................................................17

BS EN 88 ..............................................................8

BS EN ISO 8835 ..................................................11

BS ISO 17812 .....................................................17

BS EN ISO 216 ......................................................8

BS EN ISO 10993 ................................................11

BS ISO 18695 .....................................................17

BS EN 230 ..........................................................23

BS EN 13501 ......................................................11

BS ISO 21183 .....................................................15

BS EN 560 ..........................................................19

BS EN 13528 ......................................................21

BS ISO 23997 .....................................................17

BS EN ISO 661 ....................................................19

BS EN ISO 14801 ................................................12

BS ISO 24254 .....................................................17

BS EN 740 ..........................................................11

BS EN 14885 ................................................19, 23

DD ISO/TR 15235 ................................................21

BS EN 966 ..........................................................21

BS EN 14944 ......................................................12

BS EN 993 ......................................................8, 23

Alpha-numeric sequence of British Standards quoted in this issue

BS EN 1007 ..........................................................8

BS ISO 9696 .................................................16, 23

BS 848 ................................................................22

BS EN 1078 ........................................................21

BS ISO 14520 .....................................................20

BS 874 ................................................................22

BS EN 1124 ........................................................10

BS ISO 23600 .....................................................17

BS 1133 ..............................................................21

BS EN 1151 ........................................................19

BS ISO 23893 .....................................................17

BS 1192 ..........................................................8, 22

BS EN 1308 ........................................................10

BS ISO 81060 .....................................................18

BS 1262 ..............................................................21

BS EN 1323 ........................................................10

BS 1580 ..........................................................8, 22

BS EN 1324 ........................................................10

BS 1756 ..............................................................22

BS EN 1346 ........................................................10

BS 1918 ..............................................................21

BS EN 1347 ........................................................10

BS 1929 ..............................................................22

BS EN 1348 ........................................................10

BS 2000 ..............................................................22

BS EN 1384 ........................................................21

BS 2049 ..............................................................23

BS EN 1385 ........................................................21

BS 2742 ..............................................................23

BS EN 1434 ........................................................19

BS 2892 ..............................................................21

BS EN ISO 1856 ..................................................20

BS 3882 ..............................................................19

BS EN 1992 ........................................................15

BS 4177 ..............................................................20

BS EN 1994 ........................................................15

Management systems

BS 4978 ..............................................................20

BS EN 1997 ........................................................20

BS 5049 ..............................................................21

BS EN 3375 ........................................................10

PD ISO/TR 22514 ................................................18

BS 5268 ..............................................................20

BS EN 3475 ........................................................10

BS 5283 ..............................................................23

BS EN ISO 3657 ..................................................21

BS 5341 ........................................................16, 23

BS EN 3909 ........................................................10

BS 2000 ..............................................................22

BS 5381 ..............................................................21

BS EN 4008 ........................................................10

BS 7907 ................................................................8

BS 5756 ..............................................................20

BS EN 4604 ........................................................10

DD CEN/TS 993 ..............................................8, 23

BS 5930 ..............................................................20

BS EN ISO 5398 ..................................................10

BS EN 60601 ......................................................19 BS ISO 4226 .................................................15, 23

Information systems BS 6723 ..........................................................8, 23 BS 7453 ..............................................................21 BS 8723 ..........................................................8, 23 BS EN 15521 ......................................................12 BS EN 50173 ......................................................14 BS ISO/IEC 15944 ...............................................17 PD ISO/IEC TR 25021 ..........................................18

Materials and chemicals



BS EN 1071 ..................................................10, 23

5

Alpha-numeric sequence of British Standards continued... BS EN ISO 5826 ..................................................24

BS EN 60423 ......................................................14

BS ISO 17066 .....................................................17

BS EN ISO 6360 ..................................................10

BS EN 60512 ......................................................19

BS ISO 17355 .....................................................17

BS EN ISO 8307 ..................................................10

BS EN 60598 ......................................................19

BS ISO 17751 .....................................................17

BS EN ISO 8420 ..................................................21

BS EN 60601 ......................................................19

BS ISO 17812 .....................................................17

BS EN ISO 8835 ..................................................11

BS EN 60664 ......................................................14

BS ISO 18695 .....................................................17

BS EN ISO 8990 ..................................................22

BS EN 60745 ......................................................20

BS ISO 19933 .....................................................17

BS EN 10028 ......................................................11

BS EN 61000 ......................................................20

BS ISO 20858 ...............................................17, 23

BS EN 10273 ......................................................11

BS EN 61023 ......................................................14

BS EN ISO 10405 ................................................15

BS EN 61076 ......................................................14

BS EN ISO 10424 ................................................11

BS EN 61157 ......................................................14

BS EN ISO 10440 ................................................11

BS EN 61188 ......................................................14

BS EN ISO 10993 ................................................11

BS EN 61193 ......................................................14

BS EN 12004 ......................................................11

BS EN 61338 ......................................................20

BS EN 12070 ................................................12, 23

BS EN 61557 ......................................................14

BS EN 12151 ......................................................11

BS EN 61558 ......................................................14

BS EN ISO 12224 ................................................24

BS EN 61689 ......................................................14

BS ISO 24254 .....................................................17

BS EN 12566 ......................................................11

BS EN 61753 ..........................................14, 15, 23

BS ISO 24497 .....................................................17

BS EN 12767 ......................................................11

BS EN 61850 ......................................................15

BS ISO 28000 ...............................................17, 23

BS EN 13411 ......................................................24

BS EN 61937 ......................................................15

BS ISO 28001 ...............................................18, 23

BS EN 13414 ......................................................24

BS EN 62104 ......................................................20

BS ISO 28003 ...............................................18, 23

BS EN 13501 ......................................................11

BS EN 62379 ......................................................15

BS ISO 28004 ...............................................18, 23

BS EN 13528 ......................................................21

BS EN 62421 ......................................................15

BS ISO 81060 .....................................................18

BS EN 13611 ......................................................11

DD ENV ISO 8502 ...............................................22

BS IEC 62118 ......................................................23

BS EN 13630 ......................................................24

DD ENV 1071 ...............................................10, 23

BS IEC 62525 ......................................................18

BS EN 13631 ......................................................24

DD ENV 1099 .....................................................23

BS IEC 62526 ......................................................18

BS EN 13757 ......................................................24

DD ENV 1954 ...............................................11, 23

BS IEC 62527 ......................................................18

BS EN 13763 ......................................................24

DD ENV 12872 ...................................................23

BS IEC 62528 ......................................................18

BS EN 13831 ......................................................11

BS ISO 702 .........................................................15

BS IEC 62529 ......................................................18

BS EN 13857 ......................................................25

BS ISO 2490 .......................................................15

BS EN 13915 ......................................................11

BS ISO 3070 .......................................................23

BS EN 13924 ......................................................20

BS ISO 3271 .......................................................15

BS EN 13938 ......................................................25

BS ISO 4226 .................................................15, 23

BS EN 14123 ......................................................11

BS ISO 4252 .......................................................15

BS EN 14389 ......................................................11

BS ISO 4695 .......................................................15

BS EN 14459 ................................................11, 23

BS ISO 4696 .................................................15, 16

BS EN 14511 ................................................11, 12

BS ISO 4698 .......................................................16

BS EN 14682 ......................................................12

BS ISO 4960 .......................................................16

DD ISO/TS 21872 ................................................18

BS EN ISO 14801 ................................................12

BS ISO 5415 .......................................................16

DD IEC/PAS 61755 ..............................................18

BS EN 14885 ................................................19, 23

BS ISO 5954 .......................................................16

DD IEC/PAS 62396 ..............................................19

BS EN 14891 ......................................................12

BS ISO 6621 .................................................16, 23

PD 6696 .............................................................18

BS EN 14944 ......................................................12

BS ISO 6656 .......................................................21

PD ISO/PAS 20858 ........................................17, 23

BS EN ISO 15013 ................................................12

BS ISO 7215 .......................................................16

PD ISO/TR 22514 ................................................18

BS EN ISO 15015 ................................................12

BS ISO 7992 .......................................................16

PD ISO/TR 23462 ................................................18

BS EN 15027 ......................................................12

BS ISO 8188 .......................................................16

PD ISO/IEC TR 25021 ..........................................18

BS EN ISO 15138 ................................................12

BS ISO 8371 .......................................................16

BS 9F 1 ...............................................................22

BS EN 15416 ......................................................12

BS ISO 9512 .......................................................22

BS 7F 8 ...............................................................22

BS EN 15459 ......................................................12

BS ISO 9587 .......................................................16

BS 7F 34 .............................................................22

BS EN 15469 ......................................................12

BS ISO 9696 .................................................16, 23

BS 5F 54 .............................................................22

BS EN 15470 ......................................................12

BS ISO 10135 .....................................................16

BS 6F 55 .............................................................22

BS EN 15471 ......................................................12

BS ISO 10185 .....................................................22

BS 5F 58 .............................................................22

BS EN 15495 ......................................................12

BS ISO 10285 ...............................................16, 23

BS EN 15521 ......................................................12

BS ISO 10405 .....................................................15

BS EN ISO 17075 ..........................................12, 23

BS ISO 10907 .....................................................16

BS EN ISO 17652 ................................................25

BS ISO 11256 .....................................................16

BS EN ISO 19219 ................................................21

BS ISO 11257 .....................................................16

BS EN ISO 21183 ................................................15

BS ISO 11258 .....................................................16

BS EN ISO 21952 ..........................................12, 23

BS ISO 11565 .....................................................20

BS EN ISO 22435 ................................................12

BS ISO 11783 .....................................................16

BS EN ISO 26082 ................................................12

BS ISO 13226 .....................................................20

BS 3F 135 ...........................................................22

BS EN 50173 ......................................................14

BS ISO 13347 .....................................................22

BS F 139 .............................................................22

BS EN 50463 ......................................................14

BS ISO 13930 .....................................................16

BS 2F 142 ...........................................................22

BS EN 50494 ......................................................14

BS ISO 14520 .....................................................20

BS F 156 .............................................................20

BS EN 50497 ......................................................14

BS ISO 15105 .....................................................16

BS 6SP 4 .............................................................20

BS EN 60062 ......................................................19

BS ISO 15527 .....................................................17

BS SP 114 ...........................................................20

BS EN 60191 ......................................................14

BS ISO/IEC 15944 ...............................................17

PAS 24 ..........................................................19, 24

6


BS ISO 21183 .....................................................15 BS ISO 21349 .....................................................17 BS ISO 22538 .....................................................17 BS ISO 22716 .....................................................17 BS ISO 23600 .....................................................17 BS ISO 23893 .....................................................17 BS ISO 23997 .....................................................17

BS IEC 62530 ......................................................18 BS IEC 62531 ......................................................18 DD ISO/PAS 28000 ........................................17, 23 DD ISO/PAS 28001 ........................................18, 23 DD ISO/PAS 28003 ........................................18, 23 DD ISO/PAS 28004 ........................................18, 23 DD ISO/TR 15235 ................................................21

BS 6F 100 ...........................................................22 BS 5F 120 ...........................................................22 BS 2F 127 ...........................................................22 BS 2F 128 ...........................................................22 BS 2F 132 ...........................................................22 BS F 133 .............................................................22 BS 2F 134 ...........................................................22


British Standards

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2).

BS 6297:2007 Code of practice for the design and installation of drainage fields for use in wastewater treatment supersedes BS 6297:1983 ISBN 978 0 580 60756 1 £59.00 members, £118.00 non-members

The publications listed below are new and revised British Standards that were made available last month.

B/505

An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise.

Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m/h

In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section.

BS 6400:—

The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard.

BS 6400-3:2007 Low and medium pressure (3rd family gases) no current standard is superseded ISBN 978 0 580 53714 1 £67.00 members, £134.00 non-members

BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED.

GSE/30

Please order by the British Standard reference not the ISBN number.

supersedes BS 7882:1997 ISBN 978 0 580 55351 6 £51.00 members, £102.00 non-members

BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute members.

BS EN PUBLICATIONS

BS 7882:2008 Method for calibration and classification of torque measuring devices

ISE/NFE/4/1

BS EN 88:— Pressure regulators and associated safety devices for gas appliances

BS EN 88-1:2007 Pressure regulators for inlet pressures up to and including 500 mbar supersedes BS EN 88:1991 ISBN 978 0 580 54316 6 £51.00 members, £102.00 non-members GSE/22/19

BS EN 88-2:2007 Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

BS 7907:2007 Code of practice for the design and manufacture of children’s clothing to promote mechanical safety

no current standard is superseded ISBN 978 0 580 54317 3 £67.00 members, £134.00 non-members


GSE/22/19

TCI/66

Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction

BS 1192:2007

BS 8491:2008

Collaborative production of architectural, engineering and construction information. Code of practice

Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems

supersedes BS EN ISO 216:2001 ISBN 978 0 580 53874 2 £36.00 members, £72.00 non-members

supersedes BS 1192-5:1998 ISBN 978 0 580 58556 2 £59.00 members, £118.00 non-members B/555

no current standard is superseded ISBN 978 0 580 57269 2 £51.00 members, £102.00 non-members GEL/20/18

BS 1580:— Unified screw threads

BS 8723:— Structured vocabularies for information retrieval. Guide

BS 1580-1:2007 Screw threads with diameters 1⁄4 in and larger. Requirements supersedes BS 1580:Parts 1 and 2:1962 ISBN 978 0 580 57926 4 £81.00 members, £162.00 non-members FME/9

BS 8723-3:2007 Vocabularies other than thesauri no current standard is superseded ISBN 978 0 580 53862 9 £71.00 members, £142.00 non-members IDT/2/2

BS EN ISO 216:2007

PAI/11

BS EN 993:— Methods of test for dense shaped refractory products

BS EN 993-11:2007 Determination of resistance to thermal shock supersedes DD CEN/TS 993-11:2003 ISBN 978 0 580 58844 0 £29.00 members, £58.00 non-members RPI/1

BS EN 1007:— Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements

BS EN 1007-6:2007

BS 1580-3:2007 Screw threads with diameters below 1⁄4 in. Requirements

BS 8723-4:2007 Interoperability between vocabularies

Determination of tensile properties of filaments at high temperature

supersedes BS 1580-3:1965 ISBN 978 0 580 57927 1 £51.00 members, £102.00 non-members



FME/9

IDT/2/2

RPI/13

8



BS EN Publications continued... BS EN 1071:—

BS EN 1348:2007

BS EN 4604:—

Advanced technical ceramics. Methods of test for ceramic coatings

Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives

Aerospace series. Cable, electrical, for signal transmission

BS EN 1071-6:2007

supersedes BS EN 1348:1999 ISBN 978 0 580 57398 9 £29.00 members, £58.00 non-members

Determination of the abrasion resistance of coatings by a micro-abrasion wear test supersedes DD ENV 1071-6:2002 ISBN 978 0 580 55554 1 £51.00 members, £102.00 non-members RPI/13

BS EN 1124:— Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems

BS EN 1124-2:2007 System S; dimensions supersedes BS EN 1124-2:1999 ISBN 978 0 580 57113 8 £51.00 members, £102.00 non-members ISE/8

B/539

Cable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard

BS EN 3375:— Aerospace series. Cable, electrical, for digital data transmission

no current standard is superseded ISBN 978 0 580 53269 6 £29.00 members, £58.00 non-members ACE/6/-/2

BS EN 3375-004:2007

BS EN ISO 5398:—

Double braid. 77 Ohms. Type WJ. Product standard

Leather. Chemical determination of chromic oxide content


BS EN 3475:— Aerospace series. Cables, electrical, aircraft use. Test methods

BS EN 1308:2007 Adhesives for tiles. Determination of slip

BS EN 3475-418:2007


Thermal endurance for conductors

B/539

BS EN 4604-004:2007


BS EN ISO 5398-1:2007 Quantification by titration no current standard is superseded ISBN 978 0 580 55574 9 £36.00 members, £72.00 non-members TCI/69

BS EN ISO 5398-3:2007 Quantification by atomic absorption spectrometry no current standard is superseded ISBN 978 0 580 55576 3 £36.00 members, £72.00 non-members TCI/69

BS EN 1323:2007 Adhesives for tiles. Concrete slabs for tests supersedes BS EN 1323:1999 ISBN 978 0 580 57394 1 £29.00 members, £58.00 non-members B/539

BS EN 3475-603:2007 Resistance to wet arc tracking supersedes BS EN 3475-603:2002 ISBN 978 0 580 56627 1 £29.00 members, £58.00 non-members ACE/6/-/2

supersedes BS EN 1324:1999 ISBN 978 0 580 57395 8 £29.00 members, £58.00 non-members B/539

Quantification by inductive coupled plasmaoptical emission spectrometer (ICP-OES) no current standard is superseded ISBN 978 0 580 55577 0 £36.00 members, £72.00 non-members TCI/69

BS EN 1324:2007 Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives

BS EN ISO 5398-4:2007

BS EN 3909:2007 Aerospace series. Test fluids and test methods for electric components and sub-assemblies no current standard is superseded ISBN 978 0 580 56720 9 £29.00 members, £58.00 non-members

BS EN ISO 6360:— Dentistry. Number coding system for rotary instruments

ACE/6/-/3

BS EN ISO 6360-5:2007 BS EN 1346:2007

Specific characteristics of root-canal instruments

Adhesives for tiles. Determination of open time supersedes BS EN 1346:1999 ISBN 978 0 580 57396 5 £29.00 members, £58.00 non-members B/539

BS EN 4008:— Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories

no current standard is superseded ISBN 978 0 580 57866 3 £29.00 members, £58.00 non-members CH/106/4

BS EN 1347:2007

BS EN 4008-015:2007

BS EN ISO 8307:2007

Adhesives for tiles. Determination of wetting capability

Positioner for crimping tool M22520/2-01. Product standard

Flexible cellular polymeric materials. Determination of resilience by ball rebound




B/539

ACE/6/-/3

PRI/24

10



BS EN ISO 8835:—

BS EN ISO 10993:—

BS EN 13831:2007

Inhalational anaesthesia systems

Biological evaluation of medical devices

Closed expansion vessels with built in diaphragm for installation in water

BS EN ISO 10993-12:2007 BS EN ISO 8835-2:2007

Sample preparation and reference materials

Anaesthetic breathing systems

supersedes BS EN ISO 10993-12:2004 ISBN 978 0 580 56516 8 £51.00 members, £102.00 non-members

supersedes BS EN 740:1999 which remains current ISBN 978 0 580 58975 1 £59.00 members, £118.00 non-members

Flat products made of steels for pressure purposes

BS EN 10028-1:2007

BS EN 13915:2007

BS EN 12004:2007

Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods

Adhesives for tiles. Requirements, evaluation of conformity, classification and designation supersedes BS EN 12004:2001 ISBN 978 0 580 57392 7 £51.00 members, £102.00 non-members B/539

ISE/73/2

BS EN 10028-7:2007

BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements no current standard is superseded ISBN 978 0 580 57945 5 £71.00 members, £142.00 non-members B/513/-/8

Stainless steels supersedes BS EN 10028-7:2000 ISBN 978 0 580 55381 3 £67.00 members, £134.00 non-members

BS EN 12566:— Small wastewater treatment systems for up to 50 PT

ISE/30

BS EN 12566-4:2007 BS EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

Septic tanks assembled in situ from prefabricated kits no current standard is superseded ISBN 978 0 580 61089 9 £36.00 members, £72.00 non-members


B/505

ISE/73/2

Passive safety of support structures for road equipment. Requirements, classification and test methods

BS EN ISO 10424:— Petroleum and natural gas industries. Rotary drilling equipment

PSE/17/-/4

BS EN ISO 10440:— Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors

Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup supersedes BS EN 14123:2003 ISBN 978 0 580 58514 2 £51.00 members, £102.00 non-members AW/-/3

BS EN 14389:— Road traffic noise reducing devices. Procedures for assessing long term performance

BS EN 14389-1:2007 Acoustical characteristics no current standard is superseded ISBN 978 0 580 59418 2 £29.00 members, £58.00 non-members

BS EN 12767:2007

supersedes BS EN 12767:2000 ISBN 978 0 580 54158 2 £59.00 members, £118.00 non-members B/509/10


B/544/2

B/509/6

BS EN 14459:2007 Control functions in electronic systems for gas burners and gas burning appliances. Methods for classification and assessment supersedes DD ENV 1954:1997 ISBN 978 0 580 55730 9 £71.00 members, £142.00 non-members GSE/22

BS EN ISO 10424-2:2007 Threading and gauging of rotary shouldered thread connections


BS EN 14123:2007

General requirements supersedes BS EN 10028-1:2000 ISBN 978 0 580 58037 6 £51.00 members, £102.00 non-members

RHE/7

CH/194

CH/121/1

BS EN 10028:—


BS EN 13501:— Fire classification of construction products and building elements

BS EN 13501-2:2007 Classification using data from fire resistance tests, excluding ventilation services supersedes BS EN 13501-2:2003 ISBN 978 0 580 55741 5 £77.00 members, £154.00 non-members FSH/22

BS EN 14511:— Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling

BS EN 14511-1:2007 Terms and definitions supersedes BS EN 14511-1:2004 ISBN 978 0 580 58327 8 £36.00 members, £72.00 non-members RHE/17

BS EN 13611:2007 BS EN ISO 10440-1:2007

Safety and control devices for gas burners and gas burning appliances. General requirements

BS EN 14511-2:2007

Process compressors supersedes BS EN ISO 10440-1:2001 ISBN 978 0 580 54409 5 £94.00 members, £188.00 non-members


supersedes BS EN 14511-2:2004 ISBN 978 0 580 58328 5 £36.00 members, £72.00 non-members

MCE/8

GSE/22

RHE/17



Test conditions

11

BS EN Publications continued... BS EN 14511-3:2007

BS EN ISO 15015:2007

BS EN 15471:2007

Test methods

Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods

Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method



PRI/75

PTI/15

supersedes BS EN 14511-3:2004 ISBN 978 0 580 58329 2 £67.00 members, £134.00 non-members RHE/17

BS EN 14511-4:2007 Requirements

BS EN 15027:2007


Transportable wall saw and wire saw equipment for job site. Safety

RHE/17

no current standard is superseded ISBN 978 0 580 57947 9 £59.00 members, £118.00 non-members B/513/-/6

BS EN 14682:2007 Safety of children’s clothing. Cords and drawstrings on children’s clothing. Specifications supersedes BS EN 14682:2004 ISBN 978 0 580 57686 7 £51.00 members, £102.00 non-members TCI/66

BS EN ISO 15138:2007 Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning supersedes BS EN ISO 15138:2001 ISBN 978 0 580 54912 0 £81.00 members, £162.00 non-members PSE/17/-/6

BS EN ISO 14801:2007 Dentistry. Implants. Dynamic fatigue test for endosseous dental implants supersedes BS EN ISO 14801:2003 ISBN 978 0 580 55291 5 £36.00 members, £72.00 non-members CH/106/8

BS EN 14891:2007 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation no current standard is superseded ISBN 978 0 580 54600 6 £51.00 members, £102.00 non-members B/539

BS EN 14944:— Influence of cementitious products on water intended for human consumption. Test methods

BS EN 15495:2007 Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources no current standard is superseded ISBN 978 0 580 54634 1 £36.00 members, £72.00 non-members WEE/46

BS EN 15521:2007 Health informatics. Categorial structure for terminologies of human anatomy no current standard is superseded ISBN 978 0 580 57038 4 £51.00 members, £102.00 non-members IST/35

BS EN 15416:— Adhesives for load bearing timber structures. Test methods

BS EN ISO 17075:2007 BS EN 15416-3:2007 Creep deformation test at cyclic climate conditions with specimens loaded in bending shear no current standard is superseded ISBN 978 0 580 56497 0 £29.00 members, £58.00 non-members

Leather. Chemical tests. Determination of chromium(VI) content supersedes DD CEN/TS 14495:2003 ISBN 978 0 580 56381 2 £36.00 members, £72.00 non-members TCI/69

PRI/52

BS EN ISO 21952:2007 BS EN 15459:2007 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings no current standard is superseded ISBN 978 0 580 56482 6 £71.00 members, £142.00 non-members

Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel. Classification supersedes BS EN 12070:2000 ISBN 978 0 580 55958 7 £51.00 members, £102.00 non-members WEE/39

RHE/24

BS EN ISO 22435:2007 BS EN 14944-3:2007 Migration of substances from factory-made cementitious products no current standard is superseded ISBN 978 0 580 53643 4 £71.00 members, £142.00 non-members EH/6

BS EN 15469:2007 Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection no current standard is superseded ISBN 978 0 580 56655 4 £29.00 members, £58.00 non-members

Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing no current standard is superseded ISBN 978 0 580 53239 9 £67.00 members, £134.00 non-members PVE/3/1

PTI/15

BS EN 15470:2007

BS EN ISO 26082:2007

Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods

Liquefied petroleum gases. Determination of dissolved residues. High temperature gas chromatographic method

Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather




PRI/75

PTI/15

TCI/69

BS EN ISO 15013:2007

12



BS EN Publications continued... BS EN 50173:—

BS EN 60664:—

BS EN 61188-5-5:2007

Information technology. Generic cabling systems

Insulation coordination for equipment within low-voltage systems

Components with gull-wing leads on four sides

BS EN 50173-3:2007

BS EN 60664-5:2007

Industrial premises

Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

EPL/501


BS EN 61193:—

GEL/109

BS EN 61193-2:2007

no current standard is superseded ISBN 978 0 580 57440 5 £59.00 members, £118.00 non-members TCT/7

BS EN 50463:2007 Railway applications. Energy measurement on board trains no current standard is superseded ISBN 978 0 580 56034 7 £59.00 members, £118.00 non-members GEL/9

BS EN 50494:2007 Satellite signal distribution over a single coaxial cable in single dwelling installations no current standard is superseded ISBN 978 0 580 57057 5 £59.00 members, £118.00 non-members

BS EN 61023:2007 Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements, methods of testing and required test results supersedes BS EN 61023:2000 ISBN 978 0 580 57036 0 £36.00 members, £72.00 non-members EPL/80

BS EN 61076:—


Quality assessment systems

Selection and use of sampling plans for inspection of electronic components and packages no current standard is superseded ISBN 978 0 580 55333 2 £36.00 members, £72.00 non-members EPL/501

BS EN 61557:— Electrical safety in low voltage distribution systems up to 1 000 V A.C. and 1 500 V D.C.. Equipment for testing, measuring or monitoring of protective measures

EPL/100

Connectors for electronic equipment. Product requirements

BS EN 50497:2007

BS EN 61076-7-100:2006

Effectiveness of residual current devices (RCD) in TT, TN and IT systems

Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables

Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

supersedes BS EN 61557-6:1998 which remains current ISBN 978 0 580 54796 6 £36.00 members, £72.00 non-members



BS EN 61557-6:2007

PEL/85

BS EN 61558:—

EPL/48

Safety of power transformers, power supplies, reactors and similar products

BS EN 60191:— Mechanical standardization of semiconductor devices

BS EN 60191-6-13:2007

BS EN 61157:2007 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment

Design guideline of open-top-type sockets for fine-pitch ball grid array and fine-pitch land grid array (FBGA/FLGA)



EPL/87

EPL/47

Particular requirements and tests for transformers and power supplies for toys supersedes BS EN 61558-2-7:1998 ISBN 978 0 580 56481 9 £36.00 members, £72.00 non-members PEL/96

BS EN 61188:— Printed boards and printed board assemblies. Design and use

BS EN 60423:2007 Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings

BS EN 61188-5:—


BS EN 61188-5-3:2007

PEL/213

BS EN 61558-2-7:2007

Attachment (land/joint) considerations

BS EN 61689:2007 Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz supersedes BS EN 61689:1997 ISBN 978 0 580 54471 2 £71.00 members, £142.00 non-members EPL/87

Components with gull-wing leads on two sides no current standard is superseded ISBN 978 0 580 60178 1 £51.00 members, £102.00 non-members

BS EN 61753:— Fibre optic interconnecting devices and passive components performance standard

EPL/501

e-mail

14

BS EN 61188-5-4:2007

BS EN 61753-1:2007

your order

Components with J leads on two sides

General and guidance for performance standards

[email protected]


supersedes BS EN 61753-1-1:2001 ISBN 978 0 580 53367 9 £67.00 members, £134.00 non-members

EPL/501

GEL/86/2



BS EN 61753-092-6:2007

NA to BS EN 1994:—

BS ISO 702-3:2007

Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test

UK National Annex to Eurocode 4. Design of composite steel and concrete structures

Bayonet type

NA to BS EN 1994-2:2005

MTE/1


BS EN 61850:— Communication networks and systems for power utility automation

BS EN 61850-7-410:2007 Hydroelectric power plants. Communication for monitoring and control


General rules and rules for bridges no current standard is superseded ISBN 978 0 580 54983 0 £29.00 members, £58.00 non-members B/525/4

BS ENs IMPLEMENTED BY AMENDMENT

BS ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions no current standard is superseded ISBN 978 0 580 53947 3 £36.00 members, £72.00 non-members MCE/5/-/3

For the standards listed below see also the ’Amendments to British Standards’ and ’Updated British Standards’ sections of this issue of Update Standards.

BS ISO 3271:2007

BS EN 61937:—

BS EN ISO 10405:2006

Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958

Petroleum and natural gas industries. Care and use of casing and tubing

supersedes BS ISO 3271:1995 ISBN 978 0 580 55301 1 £36.00 members, £72.00 non-members

no current standard is superseded ISBN 978 0 580 56441 3 £77.00 members, £154.00 non-members PEL/57

Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices

ISE/58

PSE/17

BS EN 61937-9:2007

Implementation of European Standard EN ISO 10405 by amendment to BS ISO 10405:2000.

BS ISO 4226:2007

Non-linear PCM bitstreams according to the MAT format no current standard is superseded ISBN 978 0 580 58510 4 £29.00 members, £58.00 non-members

Air quality. General aspects. Units of measurement

BS EN ISO 21183:— Light conveyor belts

EPL/100

supersedes BS 6069-1:1994 ISBN 978 0 580 57796 3 £29.00 members, £58.00 non-members EH/2/4

BS EN ISO 21183-2:2006 BS EN 62379:—

List of equivalent terms

Common control interface for networked digital audio and video products

PRI/67

BS ISO 4252:2007

Implementation of European Standard EN ISO 21183-2 by amendment to BS ISO 211832:2005.

Agricultural tractors. Operator’s workplace, access and exit. Dimensions

BS IMPLEMENTATIONS

AGE/6

BS EN 62379-1:2007 General no current standard is superseded ISBN 978 0 580 57652 2 £77.00 members, £154.00 non-members EPL/100

BS EN 62421:2007 Electronics assembly technology. Electronic modules no current standard is superseded ISBN 978 0 580 55762 0 £36.00 members, £72.00 non-members

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.


BS ISO 4695:2007 Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index supersedes BS ISO 4695:1995 ISBN 978 0 580 55303 5 £36.00 members, £72.00 non-members ISE/58

EPL/501

BS ISO 702:—

BS ISO 4696:—

Machine tools. Connecting dimensions of spindle noses and work holding chucks

Iron ores for blast furnace feedstocks. Determination of low-temperature reductiondisintegration indices by static method

NA to BS EN 1992-2:2005

BS ISO 702-2:2007

BS ISO 4696-1:2007

Concrete bridges. Design and detailing rules

Camlock type

Reduction with CO, CO2, H2 and N2




B/525/2

MTE/1

ISE/58

NA to BS EN 1992:— UK National Annex to Eurocode 2. Design of concrete structures



15

BS Implementations continued... BS ISO 4696-2:2007

BS ISO 8188:2007

BS ISO 11256:2007

Reduction with CO and N2

Textile machinery and accessories. Pitches of knitting machines

Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index

no current standard is superseded ISBN 978 0 580 55257 1 £36.00 members, £72.00 non-members ISE/58

no current standard is superseded ISBN 978 0 580 56355 3 £29.00 members, £58.00 non-members TCI/33


BS ISO 4698:2007 Iron ore pellets for blast furnace feedstocks. Determination of the free-swelling index supersedes BS ISO 4698:1994 ISBN 978 0 580 55258 8 £51.00 members, £102.00 non-members ISE/58

BS ISO 8371:2007 Iron ores for blast furnace feedstocks. Determination of the decrepitation index supersedes BS ISO 8371:1994 ISBN 978 0 580 55277 9 £29.00 members, £58.00 non-members


BS ISO 5415:2007


BS ISO 9587:2007

ISE/58

Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement supersedes BS ISO 9587:1999 ISBN 978 0 580 59787 9 £29.00 members, £58.00 non-members

MTE/5

BS ISO 5954:2007 Cold-reduced carbon steel sheet according to hardness requirements no current standard is superseded ISBN 978 0 580 56311 9 £36.00 members, £72.00 non-members ISE/10

BS ISO 6621:— Internal combustion engines. Piston rings

BS ISO 11258:2007

STI/33

Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization

BS ISO 9696:2007


Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw no current standard is superseded ISBN 978 0 580 56412 3 £29.00 members, £58.00 non-members

Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization

ISE/58

BS ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %

BS ISO 11257:2007

Water quality. Measurement of gross alpha activity in non-saline water. Thick source method supersedes BS 6068-3.1:1993 ISBN 978 0 580 53591 8 £36.00 members, £72.00 non-members EH/3

ISE/58

BS ISO 11783:— Tractors and machinery for agriculture and forestry. Serial control and communications data network

BS ISO 10135:2007 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) supersedes BS ISO 10135:1994 ISBN 978 0 580 54836 9 £71.00 members, £142.00 non-members

BS ISO 11783-3:2007 Data link layer supersedes BS ISO 11783-3:1998 ISBN 978 0 580 55728 6 £71.00 members, £142.00 non-members AGE/6/1

TDW/4

BS ISO 6621-1:2007

Also available as part of KIT 148.

Vocabulary supersedes BS 5341-6.1:1992 ISBN 978 0 580 58429 9 £59.00 members, £118.00 non-members MCE/14/-/10

BS ISO 7215:2007 Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index supersedes BS ISO 7215:1995 ISBN 978 0 580 55254 0 £36.00 members, £72.00 non-members

BS ISO 13930:2007 Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances

Iron ores for blast furnace feedstocks. Determination of low-temperature reductiondisintegration indices by dynamic method



BS ISO 10285:2007

ISE/58

MCE/7

BS ISO 10907:— Tools for moulding. Locating rings

ISE/58

BS ISO 15105:— Plastics. Film and sheeting. Determination of gas-transmission rate

BS ISO 10907-2:2007 BS ISO 7992:2007 Iron ores for blast furnace feedstocks. Determination of reduction under load

Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)

BS ISO 15105-1:2007

supersedes BS ISO 7992:1992 ISBN 978 0 580 55253 3 £36.00 members, £72.00 non-members


supersedes BS ISO 15105-1:2002 ISBN 978 0 580 55150 5 £36.00 members, £72.00 non-members

ISE/58

MTE/12

PRI/75

16


Differential-pressure methods


BS ISO 15527:2007

BS ISO 19933:2007

BS ISO 23893:—

Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods

Space systems. Format for spacecraft launch environment test report

Water quality. Biochemical and physiological measurements on fish


BS ISO 23893-1:2007


ACE/68/-/2

PRI/75

BS ISO/IEC 15944:—

BS ISO 20858:2007

Sampling of fish, handling and preservation of samples no current standard is superseded ISBN 978 0 580 53705 9 £51.00 members, £102.00 non-members

Information technology. Business operational view

Ships and marine technology. Maritime port facility security assessments and security plan development

EH/3/5

BS ISO 23997:2007

BS ISO/IEC 15944-4:2007

supersedes PD ISO/PAS 20858:2004 ISBN 978 0 580 58901 0 £59.00 members, £118.00 non-members SME/32



BS ISO 21349:2007

PRI/60

IST/40

Space systems. Project reviews

Business transaction scenarios. Accounting and economic ontology

BS ISO 17066:2007


Hydraulic tools. Vocabulary

ACE/68/-/5


BS ISO 22538:—

MCE/8

Space systems. Oxygen safety

BS ISO 17355:2007

BS ISO 22538-1:2007

Resilient floor coverings. Determination of mass per unit area

BS ISO 24254:2007 Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) no current standard is superseded ISBN 978 0 580 54911 3 £29.00 members, £58.00 non-members PTI/7

Space data and information transfer systems. CCSDS file delivery protocol supersedes BS ISO 17355:2004 ISBN 978 0 580 56938 8 £100.00 members, £200.00 non-members

Design of oxygen systems and components no current standard is superseded ISBN 978 0 580 53674 8 £51.00 members, £102.00 non-members

BS ISO 24497:— Non-destructive testing. Metal magnetic memory

ACE/68

BS ISO 24497-1:2007

ACE/68

Vocabulary

BS ISO 22538-2:2007 BS ISO 17751:2007 Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends no current standard is superseded ISBN 978 0 580 53891 9 £51.00 members, £102.00 non-members

Selection of metallic materials for oxygen systems and components no current standard is superseded ISBN 978 0 580 53675 5 £51.00 members, £102.00 non-members

WEE/46

ACE/68

General requirements

TCI/80

BS ISO 22716:2007 BS ISO 17812:2007 Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper no current standard is superseded ISBN 978 0 580 54030 1 £36.00 members, £72.00 non-members


Cosmetics. Good manufacturing practices (GMP). Guidelines on good manufacturing practices no current standard is superseded ISBN 978 0 580 56807 7 £51.00 members, £102.00 non-members CW/217

PAI/11

BS ISO 24497-2:2007 no current standard is superseded ISBN 978 0 580 55670 8 £29.00 members, £58.00 non-members WEE/46

BS ISO 24497-3:2007 Inspection of welded joints no current standard is superseded ISBN 978 0 580 55672 2 £36.00 members, £72.00 non-members WEE/46

BS ISO 23600:2007 Textiles. Determination of resistance to water penetration. Impact penetration test

Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights



supersedes DD ISO/PAS 28000:2005 ISBN 978 0 580 57619 5 £51.00 members, £102.00 non-members

TCI/24

CH/173

SME/32

BS ISO 18695:2007



BS ISO 28000:2007 Specification for security management systems for the supply chain

17

BS Implementations continued... BS ISO 28001:2007

BS IEC 62528:2007

PD ISO/IEC TR 25021:2007

Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance

Standard testability method for embedded core-based integrated circuits

Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality measure elements

supersedes DD ISO/PAS 28001:2006 ISBN 978 0 580 58319 3 £59.00 members, £118.00 non-members

no current standard is superseded ISBN 978 0 580 59318 5 £88.00 members, £176.00 non-members GEL/93

no current standard is superseded ISBN 978 0 580 54053 0 £71.00 members, £142.00 non-members IST/15

SME/32

BS IEC 62529:2007 BS ISO 28003:2007 Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems supersedes DD ISO/PAS 28003:2006 ISBN 978 0 580 58090 1 £71.00 members, £142.00 non-members SME/32

BS ISO 28004:2007 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 supersedes DD ISO/PAS 28004:2006 ISBN 978 0 580 57669 0 £71.00 members, £142.00 non-members SME/32

BS ISO 81060:— Non-invasive sphygmomanometers

BS ISO 81060-1:2007 Requirements and test methods for nonautomated measurement type no current standard is superseded ISBN 978 0 580 55650 0 £67.00 members, £134.00 non-members CH/121/5

Standard for signal and test definition no current standard is superseded ISBN 978 0 580 59319 2 £126.00 members, £252.00 non-members GEL/93

BS IEC 62530:2007 Standard for SystemVerilog. Unified hardware design, specification and verification language no current standard is superseded ISBN 978 0 580 59320 8 £146.00 members, £292.00 non-members GEL/93

BS IEC 62531:2007 Standard for Property Specification Language (PSL) no current standard is superseded ISBN 978 0 580 59321 5 £100.00 members, £200.00 non-members GEL/93

PUBLISHED DOCUMENTS

DRAFTS FOR DEVELOPMENT DD CEN/TS 15676:2007 Wood flooring. Slip resistance. Pendulum test no current standard is superseded ISBN 978 0 580 58600 2 £36.00 members, £72.00 non-members B/543

DD CEN/TS 15680:2007 Prefabricated timber stairs. Mechanical test methods no current standard is superseded ISBN 978 0 580 58696 5 £29.00 members, £58.00 non-members B/543

DD ISO/TS 21872:— Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp.

PD 6696:— UK National Annex to BS EN 1994-2. Eurocode 4. Design of composite steel and concrete structures

PD 6696-2:2007

DD ISO/TS 21872-1:2007 Detection of Vibrio parahaemolyticus and Vibrio cholerae no current standard is superseded ISBN 978 0 580 54957 1 £51.00 members, £102.00 non-members

BS IEC 62525:2007

General rules and rules for bridges

Standard test interface language (STIL) for digital test vector data


AW/9

B/525/4

DD ISO/TS 21872-2:2007


Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae

GEL/93

PD ISO/TR 22514:— BS IEC 62526:2007

Statistical methods in process management. Capability and performance

Standard for extensions to standard test interface language (STIL) for semiconductor design environments

PD ISO/TR 22514-4:2007

no current standard is superseded ISBN 978 0 580 59314 7 £88.00 members, £176.00 non-members GEL/93

no current standard is superseded ISBN 978 0 580 54958 8 £59.00 members, £118.00 non-members AW/9

Process capability estimates and performance measures no current standard is superseded ISBN 978 0 580 53056 2 £71.00 members, £142.00 non-members

DD IEC/PAS 61755:— Fibre optic connector optical interfaces

SS/4

DD IEC/PAS 61755-3-32:2007

BS IEC 62527:2007 Standard for extensions to standard test interface language (STIL) for DC level specification

PD ISO/TR 23462:2007 Space systems. Guidelines to define the management framework for a space project

Optical interface. 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres




GEL/93

ACE/68/-/5

GEL/86/2

18



DD IEC/PAS 62396:—

BIP 2145:2008

BS EN 1151-2:2006

Process management for avionics. Atmospheric radiation effects

BS 25999-1 Business continuity management. Code of practice. Laminated Pocketbook

Noise test code (vibro-acoustics) for measuring structure and fluid-borne noise CORRIGENDUM 1

DD IEC/PAS 62396-2:2007


Guidelines for single event effects testing for avionics systems no current standard is superseded ISBN 978 0 580 56735 3 £51.00 members, £102.00 non-members GEL/107

DD IEC/PAS 62396-3:2007 Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation no current standard is superseded ISBN 978 0 580 56984 5 £29.00 members, £58.00 non-members GEL/107

PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published.

MCE/6

BS EN 1434:—

AMENDMENTS TO BRITISH STANDARDS

Heat meters

BS EN 1434-4:2007

Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time.

Pattern approval tests

The following amendments to British Standards were made available last month.

BS EN 60062:2005

CORRIGENDUM 1 CPI/30/7

BS EN 14885:2006 Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics CORRIGENDUM 1 CH/216

Marking codes for resistors and capacitors CORRIGENDUM 1 EPL/40X

BS 3882:2007 Specification for topsoil and requirements for use CORRIGENDUM 1

BS EN 60512:— Connectors for electronic equipment. Tests and measurements

AW/20

BS EN 60512-13:— Mechanical operation tests

PAS 24:2007 Enhanced security performance requirements for door assemblies supersedes PAS 24-1:1999 ISBN 978 0 580 60162 0 £71.00 members, £142.00 non-members

BS 5979:2007 Remote centres receiving signals from fire and security systems. Code of practice CORRIGENDUM 1 GW/1/11

BS EN 60512-13-2:2006 Test 13b. Insertion and withdrawal forces CORRIGENDUM 1 EPL/48

B/538/4

SPECIALIST BOOKS FROM BSI

BS EN 560:2005

BS EN 60512-13-5:2006

Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes

Test 13e. Polarizing and keying method

CORRIGENDUM 1

BIP 0027:2007

BS EN 60598:— Luminaires

BS EN ISO 661:2005 Animal and vegetable fats and oils. Preparation of test sample

BS EN 60598-2-22:1999

CORRIGENDUM 1

Particular requirements. Luminaires for emergency lighting

AW/307

CORRIGENDUM 3 CPL/34/4

BIP 2130:2008 Managing food safety CD-ROM no current standard is superseded ISBN 978 0 580 50958 2 £295.00 members, £295.00 non-members

EPL/48

WEE/18

Moving to mobility. Creating a successful remote work environment no current standard is superseded ISBN 978 0 580 50727 4 £30.00 members, £30.00 non-members

CORRIGENDUM 1

BS EN 1151:— Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations

Also incorporates Corrigenda 1 & 2, and Amendment 1.

BS EN 60601:— Medical electrical equipment

BIP 2142:2007 BS EN 60601-2-27:2006

The Route map to business continuity management. Meeting the requirements of BS 25999

BS EN 1151-1:2006


Non-automatic circulation pumps, requirements, testing, marking

Particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment

CORRIGENDUM 1

CORRIGENDUM 1

MCE/6

CH/62/4



19

Amendments to British Standards continued... BS EN 61000:—

NA to BS EN 1997-1:2004

BS EN 13924:2006

Electromagnetic compatibility (EMC)

UK National Annex to Eurocode 7. Geotechnical design. General rules

Bitumen and bituminous binders. Specifications for hard paving grade bitumens

CORRIGENDUM 1

AMENDMENT 1 £51.00 members, £102.00 non-members

BS EN 61000-4-18:2007

B/526

Testing and measurement techniques. Damped oscillatory wave immunity test CORRIGENDUM 1 GEL/210/12

B/510/19

Also incorporates Corrigendum 1.

UPDATED BRITISH STANDARDS

BS EN 60745:— Hand-held motor-operated electric tools. Safety

BS EN 61338:— Waveguide type dielectric resonators

BS EN 61338-1-4:2006 General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency

The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately.

CORRIGENDUM 1 EPL/49

Characteristics of DAB receivers CORRIGENDUM 1 EPL/100

BS ISO 11565:2006

BS 4177:1992 AMENDMENT 4 £71.00 members, £142.00 non-members PEL/23

CPL/61/6


Specification for eye bolts (unified threads) for aircraft AMENDMENT 4 £29.00 members, £58.00 non-members ACE/12

Also incorporates Amendments 1, 2 and 3.

BS 5268:— Structural use of timber

CORRIGENDUM 1

BS 5268-2:2002

MCE/9

Code of practice for permissible stress design, materials and workmanship AMENDMENT 1 £100.00 members, £200.00 non-members

Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers

B/525/5

CORRIGENDUM 1

BS 5930:1999

PRI/22

Code of practice for site investigations AMENDMENT 1 £100.00 members, £200.00 non-members

BS ISO 14520:—


Also incorporates Amendments 1, 2 and 3.

Road vehicles. Spark-plugs. Test methods and requirements

BS ISO 13226:2005

Particular requirements of strapping tools

BS SP 114:1955 Specification for cooker control units

BS EN 62104:2007

BS EN 60745-2-18:2004

SPECIAL ANNOUNCEMENTS Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

BS 4978:2007 Visual strength grading of softwood. Specification

BS 5756:2007 Visual grading of hardwood. Specification

B/526/3

CORRIGENDUM 1


FSH/18/6

FW/1

The responsible committee has agreed some corrections to these standards, which apply mainly to subclause 4.3 on processed timber. In view of the minor nature of the corrections they are not being circulated for public comment, but copies are available on request from the Programme Manager (below). Contact: Alan Hall Email: [email protected]


B/518

Gaseous fire-extinguishing systems. Physical properties and system design

BS 8474:2006 BS ISO 14520-1:2006 General requirements

BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification CORRIGENDUM 1 ACE/65/-/25

Furniture. Chairs with electrically operated support surfaces. Requirements

BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification AMENDMENT 1 £51.00 members, £102.00 non-members ISE/9/1

do not send confirmation of orders placed by

BS 6SP 4:2000 Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880/1080 MPa

BS EN ISO 1856:2001

AMENDMENT 2 ACE/12


Also incorporates Corrigendum 1 and Amendment 1.

PRI/24

20

Please

Flexible cellular polymeric materials. Determination of compression set


telephone as it can lead to duplication


BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 March, 2008.

BS 1918:—

BS 7488:1991

Glass container finishes

BS 1918-1:1978

Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers’ premises

Specification for continuous thread finish

PKW/0

PKW/0

BS 2892:1974 Specification for non-returnable wooden trays for tomatoes

STI/21

Specification for firefighters’ axes with glass fibre shafts MTE/15

PKW/0

BS 5049:— Radio interference characteristics of overhead power lines and high-voltage equipment

BS 5049-3:1994 Code of practice for minimizing the generation of radio noise GEL/210/11

BS 8404:2001 Packaging. Child-resistant packaging. Requirements and testing procedures for nonreclosable packages for pharmaceutical products PKW/0

BS EN 966:1996 Helmets for airborne sports PH/6

BS 5381:— Methods for determination of physical properties of tobacco and tobacco products

BS EN 1078:1997

BS 5381-5:2002

PH/6

DD ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination

BS 7833:1995

Draw resistance of cigarettes and pressure drop of filter rods AW/40

Helmets for pedal cyclists and for users of skateboards and roller skates

BS EN 1384:1997 Specification for helmets for equestrian activities

BS 6118:1981

PH/6

Specification for multi-trip glass bottles for beer and cider

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS EN 1385:1998

PKW/0

Helmets for canoeing and whitewater sports

BS 6119:—

PH/6

Glass bottles for carbonated soft drinks

It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 1133:— Packaging code

BS EN ISO 3657:2003 BS 6119-1:1981

Animal and vegetable fats and oils. Determination of saponification value

Specification for 750 ml and 1 litre multi-trip bottles

AW/307

PKW/0

BS EN ISO 8420:2002 BS 7273:—

Animal and vegetable fats and oils. Determination of content of polar compounds

Code of practice for the operation of fire protection measures

AW/307

BS 7273-2:1992 Mechanical actuation of gaseous total flooding and local application extinguishing systems

BS EN 13528:— Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods

FSH/12/4

BS 7367:1991 Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water PKW/0

BS EN 13528-3:2003 Guide to selection, use and maintenance EH/2/3

BS EN ISO 19219:2003

BS 1133-10.2:1991 Metal containers. Metal drums

BS 7453:—

PKW/0

Procedures for UK registration for Open Systems standards

Animal and vegetable fats and oils. Determination of visible foots in crude fats and oils AW/307

BS 1262:2002

BS 7453-1:1991

BS ISO 6656:2002

Metal packaging. Round lever-lid metal containers for surface coatings. Specification

Procedures for the UK Name Registration Authority

Animal and vegetable fats and oils. Determination of polyethylene-type polymers

PKW/0

IST/-

AW/307



21

British Standards Reviewed and Confirmed continued... BS ISO 9512:2002

BS 6F 55:1991

DD ENV ISO 8502:—

Cigarettes. Determination of ventilation. Definitions and measurement principles

Specification for 345 g/m2 and 415 g/m2 cotton canvas fabrics suitable for aerospace purposes

AW/40

ACE/65/-/39

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness

Tobacco and tobacco products. Vocabulary

BS 6F 100:1998

DD ENV ISO 8502-1:2001

AW/40

Procedure for inspection and testing of textiles for aerospace purposes

Field test for soluble iron corrosion products

BS ISO 13347:—

ACE/65/-/39

Industrial fans. Determination of fan sound power levels under standardized laboratory conditions

BS 7F 8:1992

This standard has been proposed for withdrawal as the corresponding European and International standards, ENV ISO 8502-1:1999 and ISO/TR 85021:1991 have both been withdrawn

BS ISO 10185:2004

BS ISO 13347-2:2004 (BS 848-2.2:2004) Reverberant room method

Specification for 140 g/m2 mercerized cotton fabrics and serrated edge strip for aerospace purposes ACE/65/-/39

MCE/17

BS ISO 13347-4:2004 (BS 848-2.4:2004) Sound intensity method

STI/21

BS 7F 34:2002 Light and medium duty linen (flax) sewing thread for aerospace purposes ACE/65/-/39

MCE/17

BS 2F 127:1991

BS 9F 1:1992

Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes

Specification for 140 g/m2 linen (flax) fabric and serrated edge strip for aerospace purposes

BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn

BS 874:—

ACE/65/-/39

Methods for determining thermal insulating properties

BS 2F 128:1992

BS F 133:1988

BS 874-3.2:1990

Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)

Specification for warp knitted nylon fabric for aerospace purposes

Tests for thermal transmittance and conductance. Calibrated hot-box method

ACE/65/-/39

B/540

ACE/65/-/39

ACE/65/-/39

Superseded by BS EN ISO 8990:1996

BS 2F 132:2002

BS F 139:1989

Braided nylon cord with specified dimensional stability for aerospace purposes

Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes

ACE/65/-/39

BS 1192:— Construction drawing practice

ACE/65/-/39

BS 1192-5:1998

BS 2F 134:2002 Continuous filament polyester sewing thread suitable for aerospace purposes ACE/65/-/39

BS 2F 142:1999 Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes ACE/65/-/39

BS 3F 135:2002 Braided nylon cord with unspecified dimensional stability for aerospace purposes ACE/65/-/39

BS 5F 54:2002

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 March, 2008.

B/555

Superseded by BS 1192:2007

BS 1580:Parts 1 and 2:1962 Specification for Unified screw threads FME/9

Superseded by BS 1580-1:2007

BS 1756:— Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

Heavy duty linen (flax) sewing thread for aerospace purposes ACE/65/-/39

Guide for structuring and exchange of CAD data

Methods for sampling and analysis of flue gases

BS 1756-4:1977 Miscellaneous analyses EH/2

Methods of test for petroleum and its products

This standard has been withdrawn as it is no longer relevant.

BS 2000-168:2003

BS 1929:1953

Determination of rolling bearing performance of lubricating grease

Specification for screw threads and external dimensions of lamps for endoscopic and diagnostic instruments

BS 2000:—

BS 5F 58:2002 Cotton thread for aerospace purposes ACE/65/-/39

BS 5F 120:2002

PTI/13

Continuous filament nylon sewing threads for aerospace purposes

This standard has been proposed for withdrawal as the method of test is no longer used by the petroleum industry

ACE/65/-/39

22


CH/62/4



BS 2049:1976

DD CEN/TS 993:—

BS ISO 3070:—

Specification for kerosine (paraffin) lighting appliances for domestic use

Dense shaped refractory products

Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy

CW/31

Superseded by BS 2049:1985

BS 2742:Addendum No. 1:1972 Notes of the use of Ringelmann and miniature smoke charts. The calibration of instruments in Ringelmann number EH/2/1


DD CEN/TS 993-11:2003 Determination of resistance to thermal shock

BS ISO 3070-2:1997

RPI/1

Table-type machines

Superseded by BS EN 993-11:2007

MTE/1

Superseded by BS ISO 3070-1:2007

DD CEN/TS 14495:2003 Leather. Chemical tests. Determination of chromium VI content TCI/69


BS 5283:1986

Superseded by BS EN 14885:2006

BS 5341:—

Floor type machines with detached, stationary work-holding table MTE/1


Glossary of terms relating to disinfectants CH/216

BS ISO 3070-3:1997

BS EN 230:1991 Specification for monobloc oil burners. Safety, control and regulation devices and safety times

BS ISO 3070-4:1998

GSE/22

Planer type machines with movable column


MTE/1

Piston rings up to 200 mm diameter for reciprocating internal combustion engines


BS EN 12070:2000 BS 5341-6.1:1992 Vocabulary, inspection methods and generic specifications. Vocabulary MCE/14


BS 6068:—

Welding consumables. Wire electrodes, wires and rods for arc welding of creep-resisting steels. Classification WEE/39


Water quality

BS 6068-3.1:1993

BS EN 61753-1-1:2001

EH/3

Superseded by BS ISO 9696:2007

BS 6069:— Characterization of air quality

General and guidance. Interconnecting devices (connectors) GEL/86/2


DD ENV 1071:— Advanced technical ceramics. Methods of test for ceramic coatings

Units of measurement

DD ENV 1071-6:2002

PKW/0

Determination of the abrasion resistance of coatings by a micro-abrasion wear test

EH/2

DD ENV 1099:1998 Plywood. Biological durability. Guidance for the assessment of plywood for use in different hazard classes

DD ENV 1954:1997

Superseded by DD CEN/TS 1099:2007

Internal and external fault behaviour of safety related electronic parts of gas appliances GSE/22

Superseded by BS 8723-4:2007


BS 7637:1993

DD ENV 12872:2000


DD ISO/PAS 28001:2006 Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans Superseded by BS ISO 28001:2007

SME/32


DD ISO/PAS 28004:2006 Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000 SME/32


IDT/2/2



Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems

BS 6723:1985

MCE/7

SME/32

DD ISO/PAS 28003:2006

B/541

Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)

Specification for security management systems for the supply chain



Guide to establishment and development of multilingual thesauri

DD ISO/PAS 28000:2005

RPI/13

BS 6069-4.1:1990 Stationary source emissions. Method for the determination of the mass concentration of sulphur dioxide: hydrogen peroxide/barium perchlorate/Thorin method

This standard has been withdrawn as it is no longer used.

SME/32

BS 6069-1:1994


Nuclear reactor instrumentation. Pressurized water reactor (PWR) of VVER design. Monitoring adequate cooling within the core during cold shutdown NCE/8

BS EN 61753:— Fibre optic interconnecting devices and passive components performance standard

Radiological methods. Measurement of gross alpha activity in non-saline water: thick source method

BS IEC 62118:2000

PD ISO/PAS 20858:2004 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs

Ships and marine technology. Maritime port facility security assessments and security plan development

B/541

SME/32

Superseded by DD CEN/TS 12872:2007



23

British Standards Withdrawn continued... PAS 24:—

BS EN 13630:—

BS EN 13763-7:2003

Enhanced security performance requirements for door assemblies

Explosives for civil uses. Detonating cords and safety fuses

Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

PAS 24-1:1999

BS EN 13630-1:2003

Single and double leaf, hinged external door assemblies to dwellings

CII/61

Requirements CII/61

BS EN 13763-8:2003

B/538/2

Superseded by PAS 24:2007

BS EN 13630-5:2003 Determination of resistance to abrasion of detonating cords

BRITISH STANDARDS UNDER REVIEW The following British Standards are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 March, 2008, in order to be considered by the relevant UK Committee.

Determination of the resistance to vibration of plain detonators CII/61

CII/61

BS EN 13763-9:2003 BS EN 13631:—

Determination of resistance to bending of detonators

Explosives for civil uses. High explosives

CII/61

BS EN 13631-7:2003 Determination of safety and reliability at extreme temperatures CII/61

BS EN 13763-11:2003 Determination of resistance to damage by dropping of detonators and relays CII/61

BS EN 13631-10:2003 Method for the verification of the means of initiation CII/61

BS EN 13763-12:2003 Determination of resistance to hydrostatic pressure CII/61

BS EN ISO 5826:2003 Resistance welding equipment. Transformers. General specifications applicable to all transformers

BS EN 13631-11:2003 Determination of transmission of detonation CII/61

BS EN 13763-16:2003 Determination of delay accuracy CII/61

WEE/29

BS EN 13631-13:2003 Determination of density

BS EN ISO 12224:— Solder wire, solid and flux cored. Specification and test methods

BS EN 13763-17:2003

CII/61

Determination of no-fire current of electric detonators

BS EN 13631-14:2003 BS EN ISO 12224-3:2003

Determination of velocity of detonation

Wetting balance test method for flux core solder wire efficacy

CII/61

NFE/27/4

BS EN 13757:—

BS EN 13411:—

CII/61

BS EN 13763-18:2003 Communication system for meters and remote reading of meters

Determination of series firing current of electric detonators CII/61

Terminations for steel wire ropes. Safety

BS EN 13757-1:2002 BS EN 13411-5:2003

Data exchange

U-bolt wire rope grips

PEL/894

BS EN 13763-19:2003 Determination of firing impulse of electric detonators CII/61

MHE/2

BS EN 13763:— BS EN 13414:—

Explosives for civil uses. Detonators and relays

Steel wire rope slings. Safety

BS EN 13763-4:2003 Slings for general lifting service

Determination of resistance to abrasion of leading wires and shock tubes

MHE/2

CII/61

BS EN 13414-2:2003

BS EN 13763-5:2003

Specification for information for use and maintenance to be provided by the manufacturer

Determination of resistance to cutting damage of leading wires and shock tubes

BS EN 13414-1:2003

BS EN 13763-20:2003 Determination of total electrical resistance of electric detonators CII/61

BS EN 13763-21:2003 Determination of flash-over voltage of electric detonators CII/61

CII/61

MHE/2

BS EN 13763-22:2003 BS EN 13763-6:2003 Grommets and cable-laid slings

Determination of resistance to cracking in low temperatures of leading wires

Determination of capacitance, insulation resistance and insulation breakdown of leading wires

MHE/2

CII/61

CII/61

BS EN 13414-3:2003

24



DD CEN/TS 13763:—

BS 1873 (Revision)

DD CEN/TS XXXXX

Explosives for civil uses. Detonators and relays

Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries

Business support. Support services provided to micro and small enterprises. Terminology, quality and performance requirements

DD CEN/TS 13763-27:2003 Definitions, methods and requirements for electronic initiation systems

PSE/7

CII/61

BS EN 13857:— Explosives for civil uses

BS EN 13857-1:2003 Terminology CII/61

SVS/1/-/6

will supersede BS 1873:1975

DD CEN/TS XXXXX BS 3690:—

Automated processing of mail items. ID tagging. Printing on flats

Bitumens for building and civil engineering

SVS/4

BS 3690-1

BS EN 280:2001/Amendment 2

Specification for bitumens for roads and other paved areas

Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests

will partially supersede BS 3690-1:1989 B/510/19

MHE/12

BS EN 13938:— Explosives for civil uses. Propellants and rocket propellants

BS 4278 (Revision) Specification for eyebolts for lifting purposes

BS EN 13938-3:2003 Determination of deflagration to detonation transition


BS EN 485-2 (Revision) Mechanical properties

BS 5325 (Revision)

Determination of burning rate under ambient conditions

Installation of textile floor coverings. Code of practice

Welding. Test for shop primers in relation to welding and allied processes

PRI/3

Automotive fuels. LPG. Requirements and test methods

BS 6626 (Revision) Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV PEL/17

will supersede BS EN 589:2004 PTI/15

BS EN 692:2005/Amendment 1 Machine tools. Mechanical presses. Safety

General requirements WEE/42

NFE/35/5

BS EN 589 (Revision)


BS EN ISO 17652-1:2003

will supersede BS EN 485-2:2007


CII/61

BS EN ISO 17652:—

Aluminium and aluminium alloys. Sheet, strip and plate

MHE/1

CII/61

BS EN 13938-4:2003

BS EN 485:—

MTE/1

BS 6867 (Revision)

BS EN ISO 17652-2:2003

Code of practice for maintenance of electrical switchgear for voltages above 36 kV


Welding properties of shop primers


Machine tools. Safety. Hydraulic presses

WEE/42

PEL/17

MTE/1

BS EN ISO 17652-3:2003

BS 7985 (Revision)

Thermal cutting

Code of practice for the use of rope access methods for industrial purposes

Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body


MCE/3

WEE/42


PH/5

NEW WORK STARTED BS 8473:2006/Amendment 1 The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

Intruder and hold-up alarm systems. Management of false alarms. Code of practice

BS EN CSA 99003 Customer Contact Centre SVS/7/-/5

GW/1

BS EN 1032:2003/Amendment 1 BS 10012 Specification for the management of personal information in compliance with the Data Protection Act 1998

Mechanical vibration. Testing of mobile machinery in order to determine the vibration emission value GME/21

IDT/1

BS 10 (Revision) Specification for flanges and bolting for pipes, valves, and fittings

BS EN 1088:1995/Amendment 2 BS 18002


Occupational health and safety management systems. Specification

Safety of machinery. Interlocking devices associated with guards. Principles for design and selection

PSE/15

HS/1

MCE/3



25

New Work Started continued... BS EN 1093:—


BS EN 6069

Safety of machinery. Evaluation of the emission of airborne hazardous substances

Lifting platforms. Mast climbing work platforms

Aerospace series. Rivet. 100° reduced flush head, close tolerance, inch series

MHE/12

ACE/12

BS EN 1093-6:1999/Amendment 1 Separation efficiency by mass, unducted outlet MCE/3

BS EN 1093-7:1999/Amendment 1

BS EN 1504:— Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity

Separation efficiency by mass, ducted outlet MCE/3

BS EN 1504-9 General principles for use of products and systems



MHE/7

BS EN 1093-11:2001/Amendment 1 Decontamination index

BS EN XXXX Textiles. Method of test for phthalates TCI/80

Railway applications. Bogies

BS EN 00256-287 Structural requirements

Pollutant concentration parameter, room method MCE/3

ACE/12

BS EN 00256:— Safety of industrial trucks. Additional requirements for automated functions on trucks


Aerospace series. Washer, spring, countersunk

B/517/8

Pollutant concentration parameter, test bench method MCE/3

BS EN 6094

RAE/1

BS EN 1550:1997/Amendment 1 Machine-tools safety. Safety requirements for the design and construction of work holding chucks

BS EN 00256-289

MTE/1

RAE/1

Maintenance requirements

MCE/3


BS EN 00256-291

BS EN 1230:—

Safety requirements for lifting tables

Paper and board intended for contact with foodstuffs. Sensory analysis

MHE/12

Vehicle marking. Passenger coaches and locomotives RAE/1

BS EN 1736 (Revision) BS EN 1230-1 (Revision) Odour will supersede BS EN 1230-1:2001 CW/47/3

Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators and expansion joints. Requirements, design and installation will supersede BS EN 1736:2000 RHE/18

BS EN 1230-2 (Revision) Off-flavour (taint) will supersede BS EN 1230-2:2001 CW/47/3

BS EN 1248:2001/Amendment 1 Foundry machinery. Safety requirements for abrasive blasting equipment

BS EN 00264:— Ambient air quality

BS EN 00264-089 Standard method for the determination of total gaseous mercury EH/2/3

BS EN 1755:2000/Amendment 1 Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust MHE/7

BS EN 00264-090 Standard method for the determination of mercury deposition EH/2/3

BS EN 1756:— Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements

BS EN ISO 10890

Noise test code for foundry machines and equipment


STI/10

MCE/3/10

MHE/12



Mechanical vibration and shock. Vibration isolation of machines. Information for the application of source isolation

Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests

GME/21

MHE/12

MCE/3/10


Paints and varnishes. Modelling of biocide release rate from antifouling paints by massbalance calculation

Tail lifts for passengers

BS EN ISO 11326 Petroleum, petrochemical and natural gas industries. Specification for flexible pipe ancillary equipment PSE/17/-/4

BS EN 12003 (Revision) Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives


BS EN 1865:—

Vehicle lifts

Specification for patient handling equipment used in road ambulances

will supersede BS EN 12003:1998

MHE/12


BS EN 1865-2 Power assisted stretchers


Mobile or movable jacks and associated lifting equipment

will partially supersede BS EN 1865:2000

Safety of industrial trucks. Test methods for measuring noise emissions

MHE/12

CH/239

MHE/7

26


B/539


BS EN 12227

BS EN 13001:—


Playpens for domestic use. Safety requirements and test methods

Crane safety. General design

Mechanical vibration. Industrial trucks. Laboratory evaluation and specification of operator seat vibration


GME/21/6

FW/0

General principles and requirements

BS EN 12312:— Aircraft ground support equipment. Specific requirements

MHE/3

BS EN 13736:2003/Amendment 1 Safety of machine tools. Pneumatic presses

BS EN 13001-2:2004/Amendment 2 BS EN 12312-1:2001/Amendment 1 Passenger stairs

MHE/3/1


ACE/57

BS EN 13059:2002/Amendment 1 BS EN 12312-10:2005/Amendment 1 Container/pallet transfer transporters

MTE/1

Load actions

Safety of industrial trucks. Test methods for measuring vibration

Machine tools. Safety. Sawing machines for cold metal MTE/1

MHE/7

ACE/57

BS EN 13985:2003/Amendment 1 Machine tools. Safety. Guillotine shears


BS EN 13126:—

MTE/1

Building hardware. Hardware for windows and door height windows. Requirements and test methods

BS EN 12566:—

BS EN 13126-6

Small wastewater treatment systems for up to 50 PT

Variable geometry stay hinges (with or without a friction stay)

Machine tools. Safety. Machining centres

MTE/1

BS EN 14010:2003/Amendment 1 Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages MHE/12

B/538

BS EN 12566-3:2005/Amendment 1 Packaged and/or site assembled domestic wastewater treatment plants

BS EN 13126-10


Arm-balancing systems

B/505

B/538

Safety of machine tools. Transfer and special purpose machines MTE/1


BS EN 13126-11

Safety of machine tools. Drilling machines

Top hung projecting reversible hardware

MTE/1

B/538

BS EN 12808:— Adhesives and grouts for tiles

BS EN 13126-12

BS EN 14656:2006/Amendment 1 Safety of machinery. Safety requirements for extrusion presses for steel and non-ferrous metals MCE/23

Side hung projecting reversible hardware B/538


BS EN 12808-2 (Revision) Determination of resistance to abrasion will supersede BS EN 12808-2:2002


B/539

Safety of machine tools. Milling machines (including boring machines)

Safety of machinery. Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals MCE/23

MTE/1

BS EN 12808-3 (Revision) Determination of flexural and compressive strength will supersede BS EN 12808-3:2002 B/539

BS EN 13141:— Ventilation for buildings. Performance testing of components/products for residential ventilation

BS EN 12808-5 (Revision)


Determination of water absorption

Exhaust and supply air terminal devices


RHE/2

B/539

BS EN 14681:2006/Amendment 1 Safety of machinery. Safety requirements for machinery and equipment for production of steel by electric arc furnaces MCE/23

BS EN 15061:2007/Amendment 1 Safety of machinery. Safety requirements for strip processing line machinery and equipment MCE/23

BS EN 13218:2002/Amendment 1 BS EN 12920:2006/Amendment 1 Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions

Machine tools. Safety. Stationary grinding machines


MTE/1

Power-operated mobile racking and shelving, carousels and storage lifts. Safety requirements MHE/14

B/508/3

BS EN 13329:2006/Amendment 1 Machine tools. Safety. Electro discharge machines

Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods

MTE/1

PRI/3



BS EN 15114:2006/Amendment 1 Textile floor coverings. Classification of textile floor coverings without pile PRI/3


27

New Work Started continued... BS EN 15430:—

BS EN 60601-2-46 (Revision)

BS EN 61202:—

Data acquisition and transmission

Specification for operating tables

Fibre optic isolators

BS EN 15430-2 Data transmission and download (vehicle to customer server database) B/513

will supersede BS EN 60601-2-46:1998 CH/62/4

BS EN 61202-1 (Revision) Generic specification

BS EN 60793:—


Optical fibres

GEL/86/2


BS EN 61292:—

Product specifications. Sectional specification for category A4 multimode fibres

Optical amplifier technical reports

BS EN 15492 Ethanol as a blending component for petrol. Determination of chloride and sulfate content. Ion chromatographic method PTI/13

BS EN 15768 The GC-MS identification of water leachable organic substances from materials in contact with water intended for human consumption EH/6

BS EN 15771 Vitreous and porcelain enamels. Determination of scratch hardness of surface according to Mohs

will supersede BS EN 60793-2-40:2006 GEL/86/1

GEL/86/3

Performance of high-voltage direct current (HVDC) systems


BS EN 60919-3

Power electronics for electrical transmission and distribution systems. Testing of thyristor valves for static VAR compensators

Dynamic conditions

PEL/22

PEL/22

BS EN 62496:— BS EN 60966:—

BS EN 15772

Radio frequency and coaxial cable assemblies

Textile floor coverings. Minimum requirements for needled floor coverings for single usage in events of limited duration


BS EN 15773 Industrial application of powder organic coatings to hot dip galvanized and sherardised steel articles [duplex systems]. Specifications, recommendations and guidelines STI/27/1

BS EN 15774 Pasta processing machines. Fresh and filled pasta (tagliatelle, ravioli). Safety and hygiene requirements MCE/3/5

Sectional specification for flexible coaxial cable assemblies will supersede BS EN 60966-2-1:2003

Flexible optical circuit boards using unconnectorized optical glass fibres for Category C. Controlled environment GEL/86

EPL/46

BS EN 62550 BS EN 60966-2-3 (Revision) Detail specification for flexible coaxial cable assemblies

Spare parts management DS/1

will supersede BS EN 60966-2-3:2003

BS EN 62551

EPL/46

Analysis techniques for dependability. Petri net modelling

BS EN 60966-3-1 (Revision) Blank detail specification for semi-flexible coaxial cable assemblies will supersede BS EN 60966-3-1:2003

Pressure vessels and pressure parts constructed from cast iron grades with elongations equal or below 15%

EPL/46

PVE/1

BS EN 60966-3 (Revision)

DS/1

BS EN 62565 Guidelines for carbon nanotube specifications for electrotechnical applications NTI/1

Sectional specification for semi-flexible coaxial cable assemblies Specification for metrological aspects of nonautomatic weighing instruments

Optical circuit boards performance standard

BS EN 62496-3-1

BS EN 15776

BS EN 45501 (Revision)

Parameters of amplifier components

BS EN 60919:—

STI/36

PRI/3/60

BS EN 61292-1

will supersede BS EN 60966-3:2003 EPL/46

BS EN XXXXX Film identification. Common rules on cataloguing and indexation and comprehensive terminology CPW/36

will supersede BS EN 45501:1994 CPL/705

BS EN 61196:— Coaxial communication cables

BS EN 60601:— Medical electrical equipment

BS EN XXXXX-1 General principles RAE/1

BS EN 61196-8

BS EN 60601-2:—

Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) insulation

BS EN XXXXX-3

Particular requirements for safety

EPL/46

Dynamic requirements RAE/1

BS EN 60601-2-28 (Revision) Specification for X-ray source assemblies and X-ray tube assemblies for medical diagnosis

BS EN 61196-8-2 BS EN 00019326

will supersede BS EN 60601-2-28:1993

Detail specification for 50-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

CH/62/2

EPL/46

PTI/2

28


Ethanol as a blending component for gasoline. Determination of appearance. Visual method


BS EN 00156113:—

BS ISO 10911

BS ISO 14243-2 (Revision)

Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow applications for non-isothermal testing

Solid hardmetal end mills with cylindrical shank. Dimensions

Methods of measurement

MTE/18

CH/150/4

BS EN 00156113-1

BS ISO 10966 (Revision)

Cold jets

Sports and recreational equipment. Fabrics for awnings and camping tents. Specification

RHE/2

will supersede BS ISO 10966:2005 TCI/74

BS ISO 5597 Hydraulic fluid power. Cylinder. Housings for single-acting piston and rod seals in reciprocating applications. Dimensions and tolerances will supersede BS 5751:1987 MCE/11

BS ISO 5912 Camping tents TCI/74

BS ISO 7637:— Road vehicles. Electrical disturbance by conductance and coupling

BS ISO/IEC 14908-1 IST/6

PSE/17/-/4

BS ISO 11633 Health informatics. The information security management guide for remote maintenance services for medical devices and health information systems IST/35

Protocol Stack

BS ISO/IEC 14908-2 Twisted Pair Communication IST/6

BS ISO/IEC 14908-3 Power Line Channel Specification IST/6

BS ISO/IEC 11693:— Identification cards. Optical memory cards

BS ISO/IEC 14908-4 IP Communication

Co-existence of optical memory with other machine-readable technologies IST/17

AUE/16

BS ISO 12967:—

IST/6

BS ISO 14934:— Fire tests. Calibration and use of heat flux meters

Health informatics. Service architecture Information technology. Font information interchange

Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol

Petroleum, petrochemical and natural gas industries. Recommended practice for flexible pipe ancillary equipment

Electrical transient conduction along supply lines only

BS ISO/IEC 9541:—


BS ISO 11353

BS ISO/IEC 11693-2 BS ISO 7637-2

will supersede BS ISO 14243-2:2000

BS ISO 12967-1 Enterprise viewpoint

BS ISO 14934-1 General principles FSH/21

IST/35

BS ISO/IEC 9541-3:1994/Amendment 2 Glyph shape representation IST/41

BS ISO/IEC 9541-4 Harmonization to Open Font Format IST/41

BS ISO 10325 Fibre ropes. High modulus polyethylene. 8 strand braided ropes, 12 strand braided ropes and covered ropes TCI/77

BS ISO 10769 Clay. Geosynthetic barriers. Determination of water absorption of bentonite B/553

BS ISO 10773 Clay. Geosynthetic barriers. Determination of permeability to gases B/553

BS ISO 10801 Nanotechnologies. Generation of silver nanoparticles for inhalation toxicity testing NTI/1


BS ISO/IEC 14957 BS ISO 12967-2 Information viewpoint

Information technology. Representation of data elements values. Notation of the format IST/40

IST/35

BS ISO 12967-3

BS ISO 15686:—

Computational viewpoint

Buildings and constructed assets. Service life planning

IST/35

BS ISO 13606:—

BS ISO 15686-10

Health informatics. Electronic health record communication

Matching serviceability and functional performance requirements B/500/3

BS ISO 13606-4 Security

BS ISO 15862

IST/35

Space systems. Spacecraft-to-launch-vehicle flight environments telemetry data processing

BS ISO 13769

ACE/68

Gas cylinders. Gas cylinders. Stamp marking PVE/3/7

BS ISO 16431

BS ISO 14243:—

Hydraulic fluid power. Assembled systems. Verification of cleanliness

Implants for surgery. Wear of total knee joint prostheses

will supersede PD ISO/TS 16431:2002 MCE/18/-/6

BS ISO 14243-1 (Revision) Loading and displacement parameters for weartesting machines with load control and corresponding environmental conditions for test

BS ISO 17853 (Revision)

will supersede BS ISO 14243-1:2002

will supersede BS ISO 17853:2003

CH/150/4

CH/150/4


Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification

29

New Work Started continued... BS ISO 17874:—

BS ISO/IEC 19794-8 (Revision)

BS ISO 28560-3

Remote handling devices for radioactive materials

Finger pattern skeletal data

Fixed length encoding

will supersede BS ISO/IEC 19794-8:2006

IDT/2/7

IST/44

BS ISO 17874-3 Electrical master-slave manipulators NCE/2

BS ISO/IEC 29109:— BS ISO/IEC 19794-13 Voice data IST/44

Information technology. Conformance testing methodology for biometric data interchange records as defined in ISO/IEC 19794 biometric data interchange format standard

BS ISO/IEC 19784:— Information technology. Biometric application programming interface

BS ISO/IEC 19794-14 DNA data

BS ISO/IEC 29109-1 Generalized conformance testing methodology

IST/44

BS ISO/IEC 19784-1:2006/Amendment 3

IST/44

BioAPI specification IST/44

BS ISO 21360:— Vacuum technology. Standard measurements for measuring vacuum pumps performance

BS ISO/IEC 19784-4 Biometric sensor function provider interface IST/44

BS ISO 21360-2 Positive displacement vacuum pumps

IST/44

Information technology. Common biometric exchange formats framework

BS ISO 22621:—

BS ISO/IEC 19785-4

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 2 MPa (20 bar). Polyamide (PA)

BS ISO/IEC 29109-5 Face image data IST/44

Security block format specifications

BS ISO 22621-5 Fitness for purpose of the system PRI/88/2

Information technology. Biometric data interchange formats

BS ISO 25113

Framework

Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using HC-SDMA


EPL/278


BS ISO/IEC 29109-4 Finger image data



Finger minutiae data IST/44

MCE/8

IST/44

BS ISO/IEC 29109-2

IST/44

BS ISO 29661 Radiation protection. Reference radiation fields for radiation protection. Definitions and fundamental concepts NCE/2

BS ISO 29701 Nanotechnologies. Endotoxin test on nanomaterial samples for in vitro systems NTI/1

BS ISO 25114 BS ISO/IEC 19794-2 (Revision)

Probe data reporting management (PDRM)

Finger minutiae data

EPL/278

BS ISO 30000

IST/44

BS ISO 27108

BS ISO/IEC 19794-3 (Revision) Finger pattern spectral data

Water quality. Determination of selected plant treatment agents and biocide products. Method using gas chromatography (GC-MS) following solid-phase microextraction (SPME)

Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities


EH/3/2


BS ISO XXXXX

IST/44

BS ISO 28238 BS ISO/IEC 19794-4 (Revision) Finger image data will supersede BS ISO/IEC 19794-4:2005

Compression and injection moulds. Components for gating systems. Terms

Water quality. Determination of measurement uncertainty based on validation data EH/3/2

MTE/12

BS ISO XXXXX

IST/44


SME/32

BS ISO 28560:—

Water quality. Determination of the low volatile lipophilic substances index

Information and documentation. Data model for use of RFID in libraries

EH/3/2

BS ISO 28560-1

BS IEC 60050:—

General requirements and data elements

Nuclear instrumentation

Face image data will supersede BS ISO/IEC 19794-5:2005 IST/44

IDT/2/7


BS IEC 60050-395

Iris image data

BS ISO 28560-2


Encoding based on ISO/IEC 15962

Physical phenomena, basic concepts, instruments, systems, equipment and detectors

IST/44

IDT/2/7

NCE/2

30



BS IEC 60462

DD ISO/TS 11251

PD IEC/TR 62296 (Revision)

Nuclear instrumentation. Standard test procedures for photomultiplier tubes for scintillation counting

Nanotechnologies. Use of evolved gas analysisgas chromatograph mass spectrometry (EGAGCMS) in the characterization of single-walled carbon nanotubes (SWCNTs)

Electromedical equipment. Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements

NTI/1

will supersede PD IEC/TR 62296:2003

NCE/2

CH/62/1

BS IEC 61578 Radiation protection instrumentation. Effectiveness of radon compensation for radioactive aerosol monitors including transuranic aerosols

DD ISO/TS 11308

NCE/2

NTI/1

BS IEC 62566 Nuclear power plants. Instrumentation and control systems important to safety. Guidance on selection and use of complex electronic components in the design of Instrumentation and control systems performing category A functions NCE/8

Nanotechnologies. Use of thermo gravimetric analysis (TGA) in the purity evaluation of singlewalled carbon nanotubes (SWCNT)

DD ISO/TS 11751 Terminology and definitions for carbon nanomaterials NTI/1

DD ISO/TS 11803 Nanotechnologies. Format for reporting the engineered nanomaterials content of products NTI/1

DD ISO/TS 10272:— Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp.

DD ISO/TS 10272-3 Semi-quantitative detection AW/9

DD IEC/PAS 61512:— Batch control

DD IEC/PAS 61512-4 Batch production records (NPPAS) GEL/65/1

PD CEN/TR 15775 DD ISO/TS 10797 Nanotubes. Use of transmission electron microscopy (TEM) in walled carbon nanotubes (SWCNTs)

Child use and care articles. National translations of warnings and instructions for use in child use and care articles standards. Complementary element

NTI/1

CW/39

DD ISO/TS 10798

PD 6698

Nanotubes. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA) in the characterization of single walled carbon nanotubes (SWCNTs)

Background paper to the UK National Annexes to Eurocode 8 B/525

PAS XXXX Collections management

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations,BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 March, 2008 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards.

07/19983405 DC BS 6001-2 Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limited quality (LQ) for isolated lot inspection SS/5

NTI/1

PD ISO/TR 11150 DD ISO/TS 10812 Nanotubes. Use of Raman spectroscopy in the characterization of single-walled carbon nanotubes (SWCNTs)

Natural gas. Hydrocarbon dew point and hydrocarbon content

07/30123718 DC BS ISO 22282-5 Geotechnical investigation and testing. Geohydraulic testing. Part 5. Infiltrometer test

PTI/15

B/526/3

NTI/1

PD ISO/TR 11360

DD ISO/TS 10867

NTI/1

07/30123721 DC

PD ISO/TR 11808

BS ISO 22282-4 Geotechnical investigation and testing. Geohydraulic testing. Part 4. Pumping tests

Nanotubes. Use of NIR-Photoluminescence (NIRPL). Spectroscopy in the characterization of single-walled carbon nanotubes (SWCNTs) NTI/1

Nanotechnologies. Outline of nanomaterials classification (Nano tree)

Nanotechnologies. Guide to nanoparticle measurement methods and their limitations

B/526/3

NTI/1

07/30126405 DC

DD ISO/TS 10868

BS ISO 80000-12 Quantities and units. Part 12. Solid state physics

Nanotubes. Use of UV-Vis-NIR absorption spectroscopy in the characterization of singlewalled carbon nanotubes (SWCNTs)

PD ISO/TR 11811

NTI/1

NTI/1

DD ISO/TS 10929

PD ISO/IEC TR 24748

Measurement methods for the characterization of multi-walled carbon nanotubes (MWCNTs)

Systems and software engineering. Guide for life cycle management

BS ISO 6194-3 Rotary shaft lip-type seals incorporating elastomeric sealing elements. Part 3. Storage, handling and installation

NTI/1

IST/15

MCE/11

Nanotechnologies. Guide to methods for nanotribology measurements

SS/7

07/30131661 DC



31

Draft British Standards for Public Comment continued... 07/30135889 DC

07/30163444 DC

07/30168326 DC

BS IEC 61772 Nuclear power plants. Control rooms. Application of Visual Display Unit (VDU)

BS ISO 4378-5 Plain bearings. Terms, definitions, classification and symbols. Part 5. Application of symbols

BS ISO 14723 Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves

MCE/12

PSE/17/2

07/30164430 DC

07/30168401 DC

BS EN ISO 6465 Whole cumin (Cuminum cyminum L.). Specification

BS EN 506 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet

NCE/8

07/30144737 DC BS 7619 Extruded cellular unplasticized PVC (PVC-UE) profiles. Specification PRI/82

Comments for the above document are required by 28 February, 2008

AW/7

B/542/5

07/30164460 DC 07/30149419 DC BS ISO 10303-235 Industrial automation systems and integration. Product data representation and exchange. Part 235. Application protocol. Engineering properties for product design and verification £40.00 members, £80.00 non-members

BS ISO/IEC 9541-2 AMD2 Information technology. Font information interchange. Part 2. Interchange format. Extensions to font referencing IST/41

Comments for the above document are required by 14 March, 2008

AMT/4

07/30154728 DC BS EN ISO 18592 Resistance welding. Destructive test of welds. Method for the fatigue testing of multi-spot-welded specimens WEE/29

07/30164468 DC BS ISO/IEC 9541-1 AMD4 Information technology. Font information interchange. Part 1. Architecture. Extension to font resource architecture Comments for the above document are required by 14 March, 2008

BS ISO GUIDE 64 Guide for addressing environmental issues in product standards SES/1


07/30165574 DC BS EN 13523-27 Coil coated metals. Test methods. Part 27. Resistance to humid poultice (Cataplasm test) STI/27

07/30156753 DC BS ISO 14242-3 Implants for surgery. Wear of total hip-joint prostheses. Part 3. Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test CH/150/4


BS EN 508-1 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Part 1. Steel B/542/5

07/30168407 DC

IST/41

07/30156704 DC

07/30168404 DC


BS EN 508-2 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Part 2. Aluminium B/542/5

07/30168410 DC BS EN 508-3 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Part 3. Stainless steel B/542/5

07/30169253 DC BS EN 15664-2 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal release. Part 2. Test waters EH/6

07/30166765 DC BS ISO 26602 Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls RPI/13

07/30169970 DC BS ISO 4309 Cranes. Wire ropes. Code of practice for care and maintenance, inspection and discard MHE/3

07/30157769 DC BS EN ISO 11737-2 Sterilization of medical devices. Microbiological methods. Part 2. Tests of sterility performed in the validation of a sterilization process

07/30167556 DC BS EN 3475-515 Aerospace series. Cable, electrical, aircraft use. Test methods. Part 515. Crush resistance

BS 8463 AMD1 Specification for customer billing practice

CH/198

ACE/6/-/2

SVS/7/-/4

07/30160628 DC

07/30167559 DC

07/30171469 DC

BS ISO 4378-2 Plain bearings. Terms, definitions, classification and symbols. Part 2. Friction and wear

BS EN 3475-812 Aerospace series. Cable, electrical, aircraft use. Test methods. Part 812. Return loss (VSWR)

BS EN 15080-15 Extended application of results from fire resistance tests. Part 15. Linear joint seals

MCE/12

ACE/6/-/2

FSH/22

07/30160631 DC BS ISO 4378-3 Plain bearings. Terms, definitions, classification and symbols. Part 3. Lubrication MCE/12

07/30163441 DC

07/30167873 DC BS EN 13146-9 Railway applications. Track. Test methods for fastening systems. Part 9. Determination of stiffness RAE/2

07/30171254 DC

07/30171963 DC BS EN 15741 Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/MS AW/10

07/30171966 DC 07/30167889 DC

BS ISO 4378-4 Plain bearings. Terms, definitions, classification and symbols. Part 4. Basic symbols

BS ISO 8710 Motorcycles. Brakes and brake systems. Tests and measurement methods

BS EN 15742 Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/ECD

MCE/12

AUE/14

AW/10

32



07/30172338 DC

07/30174665 DC

07/30175075 DC

BS EN 1114-1 Plastics and rubber machines. Extruders and extrusion lines. Part 1. Safety requirements for extruders

BS ISO 29802 All terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5 deg tapered rims. Designation, dimension, marking and load ratings

BS EN 3660-016 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 016. Grommet nut, style A, self-locking and non self-locking. Product standard

MCE/3/2/3

AUE/4

ACE/6/-/3

07/30172404 DC BS EN 62047-9 Semiconductor devices. Microelectromechanical devices. Part 9. Wafer to wafer bonding strength measurement for MEMS EPL/47

07/30174826 DC BS EN 50106 Safety of household and similar electrical appliance. Particular rules for routine tests referring to appliances under the scope of EN 60335-1 CPL/61

07/30172584 DC BS EN 12817 LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m3 PVE/19

07/30174885 DC BS EN 61360-2 Standard data element types with associated classification scheme for electric components. Part 2. EXPRESS dictionary scheme £18.00 members, £36.00 non-members GEL/3

07/30172587 DC BS EN 12819 LPG equipment and accessories. Inspection and requalification of LPG tanks greater than 13 m3 PVE/19

07/30174895 DC BS EN 60534-7 Industrial-process control valves. Part 7. Control valve data sheet

07/30175078 DC BS EN 3660-020 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 020. Cable outlet, Style A, straight, unsealed with clamp strain relief. Product standard ACE/6/-/3

07/30175082 DC BS EN 3660-021 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 021. Cable outlet, Style A, 90°, unsealed with clamp strain relief. Product standard ACE/6/-/3

GEL/65/2

07/30172830 DC BS EN 15746-1 Railway applications. Track. Road-rail machines and associated equipment. Part 1. Technical requirements for running and working

07/30175086 DC 07/30174909 DC BS EN ISO 11591 Small craft, engine-driven. Field of vision from helm position GME/33

RAE/2

BS EN 3660-037 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 037. Bushing strip, elastomer, for cable outlet, style Z. Product standard ACE/6/-/3

07/30174917 DC 07/30172833 DC BS EN 15746-2 Railway applications. Track. Road-rail machines and associated equipment. Part 2. General safety requirements RAE/2

07/30174621 DC BS EN 62271-109 AMD1 High-voltage switchgear and controlgear. Part 109. Alternating current series capacitor bypass switches £18.00 members, £36.00 non-members PEL/17/1

07/30174629 DC

BS EN ISO 19126 Geographic information. Feature concept dictionaries and registers IST/36

07/30174921 DC BS ISO 19144-1 Geographic information. Classification systems. Part 1. Classification system structure Comments for the above document are required by 31 March, 2008

07/30175019 DC

GEL/81

07/30175034 DC BS ISO 18352 Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact energy level

BS ISO 4079 Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification PRI/66

BS ISO 1436 Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oilbased or water-based fluids. Specification PRI/66

PRI/42

07/30175139 DC 07/30175054 DC

BS EN 62305-4 Protection against lightning. Part 4. Electrical and electronic systems within structures

07/30175122 DC

07/30175126 DC

GEL/81

07/30174637 DC

EPL/278

BS ISO 22128 Terminology products and services. Overview and guidance TS/1

BS EN 62305-2 Protection against lightning. Part 2. Risk management

BS EN ISO 15008 Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle visual presentation

IST/36

BS EN 62305-1 Protection against lightning. Part 1. General principles

07/30174633 DC

07/30175097 DC

BS EN ISO 14509-3 Small craft. Airborne sound emitted by powered recreational craft. Part 3. Sound assessment using calculation and measurement procedures

BS ISO 3318 Assembly tools for screws and nuts. Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches. Maximum widths of heads MTE/15

GME/33

GEL/81

07/30175153 DC 07/30175064 DC

BS EN 62305-3 Protection against lightning. Part 3. Physical damage to structures and life hazard

BS EN 3660-036 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 036. Spacer pad for cable outlet, style Z. Product standard

BS IEC 60951-3 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post accident conditions. Part 3. Equipment for continuous high range area gamma monitoring

GEL/81

ACE/6/-/3

NCE/8

07/30174641 DC



33

Draft British Standards for Public Comment continued... 07/30175155 DC

07/30175446 DC

08/30172909 DC

BS IEC 60951-4 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post accident conditions. Part 4. Equipment for continuous inline or on-line monitoring of radioactivity in process stream

BS EN 60068-3-1 Environmental testing. Part 3-1. Supporting documentation and guidance. Cold and dry heat tests

BS EN 60191-6-19 Mechanical standardization of semiconductor devices. Part 6-19. Measurement methods of package warpage at elevated temperature and the maximum permissible warpage

NCE/8

07/30175157 DC BS ISO 3862 Rubber hoses and hose assemblies. Rubber-covered spiral wire-reinforced hydraulic types for oil-based or water based fluids. Specification

GEL/104

EPL/47

07/30175479 DC BS EN 61058-2-5 Switches for appliances. Part 2-5. Particular requirements for changeover selectors EPL/23


PRI/66

07/30175246 DC BS EN 60626-1 Combined flexible materials for electrical insulation. Part 1. Definitions and general requirements GEL/15/3/10


08/30175474 DC BS EN 4604-002 Aerospace series. Cable, electrical, for signal transmission. Part 002. General ACE/6/-/2

08/30101302 DC

Comments for the above document are required by 30 April, 2008

BS ISO 17334 Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding

08/30175691 DC

STI/33


BS ISO/IEC 18018 Information technology. Guidance to configuration management tool capabilities IST/15

07/30175250 DC BS EN 60626-2 Combined flexible materials for electrical insulation. Part 2. Methods of test GEL/15/3/10

08/30153603 DC BS ISO 10957 Information and documentation. International standard music number (ISMN) IDT/2/18

07/30175257 DC BS EN 60819-1 Non-cellulosic papers for electrical purposes. Part 1. Definitions and general requirements GEL/15/3/10

07/30175264 DC BS EN 62489-1 Electroacoustics. Audiofrequency induction loop systems for assisted hearing. Part 1. Methods of measuring and specifying the performance of system components EPL/29


BS ISO/IEC 24766 Information technology. Guideline to requirement engineering tool capabilities

08/30156969 DC


BS 437 Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems

08/30175739 DC

PSE/10

BS ISO/IEC 11695-1 Identification cards. Optical memory cards. Holographic recording method. Part 1. Physical characteristics

08/30158435 DC

IST/17

BS 9999 Code of practice for fire safety in the design, management and use of buildings £33.00 members, £66.00 non-members

07/30175287 DC

CPW/42

08/30175694 DC

IST/15

FSH/14

BS ISO 10505 Photography. Root mean square (RMS) granularity of photographic films. Method of measurement


08/30162307 DC BS 8008 AMD1 Guide to safety precautions and procedures for the construction and descent of machine bored shafts for piling and other purposes

08/30175746 DC BS ISO/IEC 11695-2 Identification cards. Optical memory cards. Holographic recording method. Part 2. Dimensions and location of accessible optical area IST/17

08/30175749 DC

07/30175418 DC

B/526

BS EN 60335-2-89 Household and similar electrical appliances. Safety. Part 2-89. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

BS ISO/IEC 11695-3 Identification cards. Optical memory cards. Holographic recording method. Part 3. Optical properties and characteristics

08/30166177 DC

IST/17

BS 6891 AMD2 Installation of low pressure gas pipework of up to 35 mm (R1⁄4) in domestic premises (2nd family gas). Specification

08/30175752 DC

CPL/61/3

GSE/30

07/30175425 DC BS EN 60335-2-24 Household and similar electrical appliances. Safety. Part 2-89. Particular requirements for refrigerating appliances, icecream appliances and ice-makers CPL/61/3

07/30175441 DC

08/30170655 DC BS EN 60424-5 Ferrite cores. Guide on the limits of surface irregularities. Part 5. Planarcores

PTI/13


EPL/51

08/30175763 DC


BS EN 60191-6-18 Mechanical standardization of semiconductor devices. Part 6-18. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)

BS EN 61000-4-13 AMD1 Electromagnetic compatibility (EMC). Part 4-13. Testing and measurement techniques. Harmonics and interharmonics including mains signalling at A.C. power port, low frequency immunity tests

BS 8463 AMD1 Specification for customer billing practice

GEL/210/8

SVS/7/-/4

34

BS ISO 3987 Petroleum products. Determination of sulfated ash in lubricating oils and additives

08/30171254 DC


EPL/47



DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

EN 50465 Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW The document has been issued by CEN/CLC JWG FCGA for FV ballot. The project was not issued as a Draft for Public Comment but the FV text will be reviewed thoroughly by the relevant committee. Contact: Keith Seyde Email: [email protected]

ISO/IEC 14496:—

ISO/IEC 23000:—

Information technology. Coding of audio-visual objects

Information technology. Multimedia application format (MPEG-A)

ISO/IEC 14496-5:2001/Amendment 18 Reference software This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the Programme Manager (below). Comments should be made by 6 March, 2008. Contact: Jean Stride Email: [email protected] IST/37

Plastics. Determination of dynamic mechanical properties

ISO 6721-9:1997/Amendment 1 Tensile vibration. Sonic-pulse propagation method The above text will update BS 2782-3:Method 323F:1997; ISO 6721-9:1997. When implementing this ISO amendment, BS 27823:Method 323F will be renumbered to BS ISO 6721-9:1997. Copies of the amended text are available from the Programme Manager (below). Contact: Alex Price Email: [email protected] PRI/21

This standard as been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the Programme Manager (below). Comments should be made by 6 March, 2008. Contact: Jean Stride Email: [email protected]

ISO/IEC 15938:— Information technology. Multimedia content description interface

ISO/IEC 15938-12 Query format This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the Programme Manager (below). Comments should be made by 16 March, 2008. Contact: Jean Stride Email: [email protected]

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

prEN ISO 16282 Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature

IST/37

ISO 16893:— Wood-based panels. Particleboard

ISO 16893-2 Requirements

Copies of the above document are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] RPI/1

A copy of the above document is available from the Programme Manager (below). Contact: Alan Hall Email: [email protected] B/541

ISO 10526:2007

Portable video application format

IST/37

GEL/105

ISO 6721:—

ISO/IEC 23000-8

prEN 1470 Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings

CIE Standard Illuminants for Colorimetry

ISO 16894 Wood-based panels. Oriented strand boards. Definitions, classification and specifications

ISO 10527:2007 CIE Standard Colorimetric Observers The above standards have been published by ISO and will be implemented as BS ISO standards replacing BS ISO 10526:1999 and BS ISO/CIE 10527:1991 respectively.

A copy of the above document is available from the Programme Manager (below). Contact: Alan Hall Email: [email protected]

Copies are available on request from the contact point (below). Please note that there is no DPC issued for this, this is for a second UAP. Contact: Committee Service Centre Email: [email protected] PRI/3

B/541

The standards were prepared as CIE S 014-2:2006 and CIE S 014-1:2006 by the International Commission on Illumination which has been recognized by the ISO Council as an international standardizing body. Contact: Geraldine Salt Email: [email protected]

Help Us to Help

ISO/IEC 19776:— Information technology. Computer graphics and image processing. Extensible 3D (X3D) encodings

ISO/IEC 19776-1

STI/14

Extensible Markup Language (XML) encoding

e-mail your order [email protected]

This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 29. Copies of the text are available from the Programme Manager (below). Comments should be made by 2 March, 2008. Contact: Jean Stride Email: [email protected]

You! Always quote your Customer Number Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you

IST/31



35

CEN European Standards

CEN EUROPEAN STANDARDS

EN 1845:2007

EN 3155-071:2007

Footwear manufacturing machines. Footwear moulding machines. Safety requirements

Contacts, electrical, female, type A, crimp, class S. Product standard

MCE/3/12

ACE/6/-/3

EN 1870:—

EN 3240:2007

Safety of woodworking machines. Circular sawing machines

Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1 100 MPa (at ambient temperature) / 425°C

EN 1870-13:2007

ACE/12

EUROPEAN RATIFIED TEXTS NOTE: SEE ALSO ENs LISTED UNDER THE ETSI SECTION IN THIS ISSUE OF UPDATE STANDARDS FOR TELECOMMUNICATION EUROPEAN STANDARDS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

Horizontal beam panel sawing machines MTE/23

EN 3301:2007

Vertical panel sawing machines

Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1 000 MPa/550°C

MTE/23

ACE/12

EN 1886:2007

EN 3302:2007

EN 1870-14:2007

Ventilation for buildings. Air handling units. Mechanical performance RHE/2

Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550°C. Technical specification ACE/12

EN 196:— Methods of testing cement

EN 2591:— Aerospace series. Elements of electrical and optical connection. Test methods

EN 196-7:2007 Methods of taking and preparing samples of cement B/516/12

EN 471:— High-visibility warning clothing for professional use. Test methods and requirements AMENDMENT 1:December 2007

EN 2591-221:2007

EN 3324:2007 Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550°C. Unplated ACE/12

Voltage Standing Wave Ratio (VSWR) ACE/6/-/3

EN 3325:2007

Insertion Loss (I.L.)

Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535). Classification: 1 000 MPa/550°C. Unplated

ACE/6/-/3

ACE/12

EN 2591-223:2007

EN 3326:2007

Measurement of characteristic impedance of a coaxial connector or contact

Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1 275 MPa/650°C, unplated

EN 2591-222:2007

to EN 471:2003 PH/3/7

EN 483:—

ACE/6/-/3

Gas fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW AMENDMENT 4:December 2007

to EN 483:1999

ACE/12

EN 2591-224:2007 RF leakage

EN 3431:2007

ACE/6/-/3

Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification: 1 100 MPa (at ambient temperature) / 425°C

GSE/29

EN 1036:— Glass in building. Mirrors from silver-coated float glass for internal use

EN 1036-1:2007 Definitions, requirements and test methods

EN 2591-225:2007 RF high potential withstanding voltage

ACE/12

ACE/6/-/3

EN 3487:2007 EN 2591-226:2007 Corona level ACE/6/-/3

Aerospace series. Steel FE-PA3601 (X6CrNiTi1810). Air melted. Softened. Bar for machining – a or D = 250 mm – 500 MPa = Rm = 700 MPa ACE/61/-/15

B/520/1

EN 3155:—

EN 3733:—

Aerospace series. Electrical contacts used in elements of connection

Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150° continuous

EN 3155-070:2007

EN 3733-005:2007

to EN 1269:1997

Contacts, electrical, male, type A, crimp, class S. Product standard

Receptacle, connector, two hole fixing for cable to EN 4532. Product standard

PRI/3

ACE/6/-/3

ACE/6

EN 1269:— Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test AMENDMENT 1:December 2007

36



EN 3733-007:2007

EN 4639-102:2007

EN 14989:—

Ferrule for cable to EN 4532. Product standard

Optical contact for cable EN 4641-102. Operating temperatures between -55° and 100°. Product standard ACE/6/-/3

Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications

EN 12080:2007

EN 14989-2:2007

Railway applications. Axleboxes. Rolling bearings

Flue and air supply ducts for individual room sealed appliances

RAE/3/-/2

B/506

EN 12081:2007

EN 15067:2007

Railway applications. Axleboxes. Lubricating greases

Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements

ACE/6/-/10

EN 3745:— Aerospace series. Fibres and cables, optical, aircraft use, test methods

EN 3745-705:2007 Contrast measurement ACE/6/-/10

EN 4627:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De = 150 mm – 1 100 MPa = Rm = 1 300 MPa ACE/61/-/15

RAE/3/-/2

MCE/3/2

EN 12082:2007 Railway applications. Axleboxes. Performance testing RAE/3/-/2

EN 15267:— Air quality. Certification of automated measuring systems

EN 4628:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De = 150 mm – 1 100 MPa = Rm = 1 300 MPa

EN 12193:2007 Light and lighting. Sports lighting CPL/34/10

ACE/61/-/15

EN 13242:— EN 4629:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forging stock. De = 300 mm ACE/61/-/15

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction AMENDMENT 1:December 2007

to EN 13242:2002

EN 15267-3:2007 Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources EH/2/1

EN 15270:2007 Pellet burners for small heating boilers. Definitions, requirements, testing, marking RHE/10

B/502

EN 4630:2007

EN 15320:2007

Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De = 200 mm – 900 MPa = Rm = 1 050 MPa

EN 14353:2007 Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods

Identification card systems. Surface transport applications. Interoperable Public Transport Applications. Framework

ACE/61/-/15

B/544/2

IST/17

EN 4631:2007

EN 14399:—

EN 15342:2007

Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De = 200 mm – 900 MPa = Rm = 1 050 MPa

High strength structural bolting for preloading

Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates

ACE/61/-/15

System HR. Countersunk head bolt and nut assemblies

PRI/89

EN 14399-7:2007

FME/9/1

EN 4639:— Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 dia. Ferrule, with removable alignment sleeve holder

EN 14399-8:2007

EN 15343:2007 Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content

System HV. Hexagon fit bolts and nut assemblies

PRI/89

FME/9/1

EN 15344:2007

EN 4639-001:2007

Plastics. Recycled plastics. Characterisation of Polyethylene (PE) recyclates

Technical specification

EN 14707:—

ACE/6/-/3

Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation

PRI/89

List of product standards

AMENDMENT 1:December 2007

ACE/6/-/3

to EN 14707:2005

Plastics. Recycled plastics. Characterisation of Polypropylene (PP) recyclates

B/540/8

PRI/89

Optical contact for cable EN 4641-100. Operating temperatures between -65° and 125°. Product standard

EN 14753:2007

EN 15346:2007

Machinery and equipment for the continuous casting of steel

Plastics. Recycled plastics. Characterisation of poly(vinyl chloride) (PVC) recyclates

ACE/6/-/3

MCE/23

PRI/89

EN 4639-002:2007

EN 15345:2007

EN 4639-101:2007



37

CEN European Standards continued... EN 15347:2007

EN 15492:2007

EN 50436:—

Plastics. Recycled plastics. Characterisation of plastics wastes

Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method

Alcohol interlocks. Test methods and performance requirements

PRI/89

PTI/13

EN 50436-2:2007 EN 15348:2007 Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates

EN 15567:— Sports and recreational facilities. Ropes courses

PRI/89

Instruments having a mouthpiece and measuring breath alcohol for general preventive use AUE/16

EN 15567-1:2007 EN 15376:2007

Construction and safety requirements

Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods

SW/136

PTI/2

EN 15567-2:2007 Operation requirements

EN 15416:—

PRI/52

EN 15430:— Winter and road service area maintenance equipments. Data acquisition and transmission

EN 15430-1:2007 In-vehicle data acquisition B/513

EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

EN 15433:— Transportation loads. Measurement and evaluation of dynamic mechanical loads

EN 50152:—

PKW/0

PKW/0

GEL/210/11

EN 60079:— Explosive atmospheres

EN 60079-2:2007 (IEC 60079-2:2007) Equipment protection by pressurized enclosures “p” GEL/31

EN 60115:— Fixed resistors for use in electronic equipment

EN 60115-1:— EN 50152-1:2007

Generic specification

Single-phase circuit-breakers with Un above 1kV


GEL/9/3

to EN 60115-1:2001

EN 15433-2:2007 Data acquisition and general requirements for measuring equipment

Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers

Railway applications. Fixed installations. Particular requirements for A.C. switchgear

EN 15433-1:2007 General requirements

GEL/8

EN 55012:2007 (IEC CISPR 12:2007)

CENELEC PUBLICATIONS Static load test of multiple bondline specimens in compression shear

Requirements for the connection of microgenerators in parallel with public low-voltage distribution networks

SW/136

Adhesives for load bearing timber structures. Test methods

EN 15416-2:2007

EN 50438:2007

EPL/40X

EN 50152-2:2007 Single-phase disconnectors, earthing switches and switches with Un above 1 kV

EN 60335:— Household and similar electrical appliances

GEL/9/3

EN 15433-3:2007 Data validity check and data editing for evaluation

EN 50342:—

PKW/0

Lead-acid starter batteries

EN 15433-4:2007

EN 50342-2:2007

to EN 60335-2-76:2005

Dimensions of batteries and marking of terminals

CPL/61/01

EN 60335-2-76:— Particular requirements for electric fence energizers AMENDMENT 11:January 2008

Data evaluation PKW/0

EN 15433-5:2007 Derivation of test specifications PKW/0

PEL/21

EN 60669:— EN 50411:— Fibre organisers and closures to be used in optical fibre communication systems. Product specifications

EN 60669-2-1:—

EN 15433-6:2007 Automatic recording systems for measuring randomly occurring shock during monitoring of transports

EN 50411-2-3:2007

PKW/0

GEL/86/2

38

Switches for household and similar fixed electrical installations

Sealed inline fibre splice closures Type 1, for category S & A


Particular requirements. Electronic switches CORRIGENDUM 1:December 2007

to EN 60669-2-1:2004 PEL/23


EN 60730:—

EN 60974:—

IEC 60050:—

Automatic controls for household and similar use

Arc welding equipment

International Electrotechnical Vocabulary

EN 60974-3:2007 (IEC 60974-3:2007)

IEC 60050-411:—

Arc striking and stabilizing devices

Rotating machinery

Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

WEE/6

AMENDMENT 1:November 2007

CPL/72

EN 60974-10:2007 (IEC 60974-10:2007)

EN 60730-2-3:2007 (IEC 60730-2-3:2006)

EN 60730-2-4:2007 (IEC 60730-2-4:2006) Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type CPL/72

EN 60730-2-10:2007 (IEC 60730-2-10:2006) Particular requirements for motor-starting relays CPL/72

to IEC 60050-411:2007 £41.00 members, £68.00 non-members GEL/1

Electromagnetic compatibility (EMC) requirements

IEC 60068:—

WEE/6

Environmental testing

EN 60976:2007 (IEC 60976:2007) Medical electrical equipment. Medical electron accelerators. Functional performance characteristics CH/62/3

IEC 60068-2-6:2007 (Edition 7) Tests. Test Fc: Vibration (sinusoidal) £75.00 members, £125.00 non-members GEL/104

EN 61058:— Switches for appliances

IEC 60076:— EN 60793:— Optical fibres

EN 60793-1-48:2007 (IEC 60793-1-48:2007) Measurement methods and test procedures. Polarization mode dispersion GEL/86/1

EN 61058-1:— (IEC 61058-1:2000/A2:2007) General requirements

IEC 60076-6:2007

AMENDMENT 2:January 2008

to EN 61058-1:2002

Reactors £113.00 members, £188.00 non-members

EPL/23

PEL/14

EN 61138:2007 (IEC 61138:2007)

IEC 60079:—

EN 60793-2-10:2007 (IEC 60793-2-10:2007)

Cables for portable earthing and shortcircuiting equipment

Product specifications. Sectional specification for category A1 multimode fibres

GEL/20/17

CENELEC REPORTS EN 60947:— CLC/TR 50173-99-1:2007 Cabling guidelines in support of 10 GBASE-T

EN 60947-5:—

PEL/17/2

EN 60947-5-9:2007 (IEC 60947-5-9:2006) Flow rate switches

Electrical installations design, selection and erection £109.00 members, £182.00 non-members GEL/31/11

IEC 60317:—

IEC PUBLICATIONS Proximity switches

(Edition 4)

TCT/7

Control circuit devices and switching elements

EN 60947-5-2:2007 (IEC 60947-5-2:2007)

Explosive atmospheres

IEC 60079-14:2007

GEL/86/1

Low-voltage switchgear and controlgear

Power transformers

It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)

Specifications for particular types of winding wires

IEC 60317-55:2007 Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 £20.00 members, £33.00 non-members GEL/55

PEL/17/2

IEC 60034:— EN 60950:—

Rotating electrical machines

Information technology equipment. Safety

IEC 60318:— Electroacoustics. Simulators of human head and ear

IEC 60034-3:2007 (Edition 6)

EN 60950-1:—

IEC 60318-6:2007

to EN 60950-1:2001

Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines £54.00 members, £90.00 non-members

EPL/108

PEL/2

EPL/29

General requirements CORRIGENDUM 1:December 2007



Mechanical coupler for the measurement of bone vibrators £32.00 members, £53.00 non-members

39

IEC Publications continued... IEC 60335:—

IEC 60793:—

IEC 61300:—

Household and similar electrical appliances. Safety

Optical fibres

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

IEC 60335-2-50:—

IEC 60793-2:2007 (Edition 6)

IEC 61300-3-42:2007


Product specifications. General £20.00 members, £33.00 non-members

to IEC 60335-2-50:2002

GEL/86/1

Examinations and measurements. Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves £24.00 members, £40.00 non-members

Particular requirements for commercial electric bains-marie

£9.00 members, £15.00 non-members

GEL/86/2

CPL/61/5

IEC 60874:— Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables

IEC 61318:2007

to IEC 60335-2-64:2002

IEC 60874-19-1:2007

PEL/78


(Edition 3)

CPL/61/5

Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b. Detail specification £45.00 members, £75.00 non-members

IEC 60335-2-64:— Particular requirements for commercial electric kitchen machines AMENDMENT 1:December 2007

IEC 60335-2-69:— Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

GEL/86/2

£12.00 members, £22.00 non-members CPL/61/10

IEC 60584:— Thermocouples

Live working. Conformity assessment applicable to tools, devices and equipment £28.00 members, £47.00 non-members

IEC 61753:— Fibre optic interconnecting devices and passive components performance standard

IEC 61753-021-2:2007 (Edition 2)


to IEC 60335-2-69:2005

(Edition 3)

IEC 60874-19-3:2007 (Edition 2)

Grade C/3 single-mode fibre optic connectors for category C. Controlled environment £32.00 members, £53.00 non-members

Fibre optic adaptor (duplex) type SC for multimode fibre connectors. Detail specification £41.00 members, £68.00 non-members

GEL/86/2

GEL/86/2

IEC 61784:— Industrial communication networks. Profiles

IEC 60584-3:2007 (Edition 2) Extension and compensating cables. Tolerances and identification system £20.00 members, £33.00 non-members GEL/65/2

IEC 60901:— Single-capped fluorescent lamps. Performance specifications AMENDMENT 4:December 2007

to IEC 60901:2001 £86.00 members, £143.00 non-members

IEC 61784-2:2007 Additional fieldbus profiles for real time networks based on ISO/IEC 8802-3 £120.00 members, £200.00 non-members AMT/7

CPL/34/1

IEC 61784-3:2007 IEC 60601:— Medical electrical equipment

IEC 61076:— Connectors for electronic equipment. Product requirements

Functional safety fieldbuses. General rules and profile definitions £75.00 members, £125.00 non-members AMT/7

IEC 60601-2-39:2007 (Edition 2) Particular requirements for basic safety and essential performance of peritoneal dialysis equipment £37.00 members, £62.00 non-members CH/150/2

IEC 61076-3-110:2007

IEC 61800:—

Rectangular connectors. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz £86.00 members, £143.00 non-members

Adjustable speed electrical power drive systems

IEC 61800-7:—

EPL/48

Generic interface and use of profiles for power drive systems

IEC 60730:— Automatic controls for household and similar use

IEC 61158:— Industrial communication networks. Fieldbus specifications


Interface definition £109.00 members, £182.00 non-members PEL/22

IEC 60730-2-14:— Particular requirements for electric acutators

IEC 61800-7-1:2007

IEC 61158-3-19:2007 IEC 61800-7-201:2007


Data-link layer service definition. Type 19 elements £49.00 members, £82.00 non-members

CPL/72

AMT/7

PEL/22

to IEC 60730-2-14:2001

40


Profile type 1 specification £115.00 members, £192.00 non-members


IEC Publications continued... IEC 61800-7-202:2007

IEC/TS 61949:2007

IEC/PAS 61512:—

Profile type 2 specification £120.00 members, £200.00 non-members

Ultrasonics. Field characterization. In-situ exposure estimation infinite-amplitude ultrasonic beams £60.00 members, £100.00 non-members

Batch control

EPL/87

Batch production records (NPPAS) £98.00 members, £163.00 non-members

PEL/22

IEC 61800-7-203:2007 Profile type 3 specification £120.00 members, £200.00 non-members PEL/22

IEC 61800-7-204:2007 Profile type 4 specification £130.00 members, £217.00 non-members PEL/22

IEC 62108:2007 Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval £66.00 members, £110.00 non-members GEL/82

IEC 62282:—

IEC/PAS 61512-4:2007

GEL/65/1

ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested.

Fuel cell technologies

IEC 61800-7-301:2007

IEC 62282-6-200:2007

Mapping of profile type 1 to network technologies £113.00 members, £188.00 non-members

Micro fuel cell power systems. Performance test methods £28.00 members, £47.00 non-members

PEL/22

GEL/105

The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

ISO 1629:— Rubber and latices. Nomenclature

IEC 61800-7-302:2007 Mapping of profile type 2 to network technologies £54.00 members, £90.00 non-members PEL/22

IEC 62340:2007 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF) £49.00 members, £82.00 non-members


to ISO 1629:1995 £7.00 members, £12.00 non-members PRI/10

Will be implemented as an identical British Standard

NCE/8

ISO 1856:— IEC 61800-7-303:2007 Mapping of profile type 3 to network technologies £109.00 members, £182.00 non-members PEL/22

IEC 61800-7-304:2007

IEC 62341:— Organic light emitting diode displays

to ISO 1856:2000 £7.00 members, £12.00 non-members

Terminology and letter symbols £54.00 members, £90.00 non-members

PRI/24

EPL/47

PEL/22

Maritime navigation and radio-communication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results £122.00 members, £203.00 non-members

(Edition 2) Solar photovoltaic energy systems. Terms, definitions and symbols £105.00 members, £175.00 non-members GEL/82

IEC 61915:— Low-voltage switchgear and controlgear. Device profiles for networked industrial devices

IEC 62388:2007

EPL/80

IEC 62429:2007 Reliability growth. Stress testing for early failures in unique complex systems £66.00 members, £110.00 non-members


ISO 2017:— Mechanical vibration and shock. Resilient mounting systems

ISO 2017-2:2007 Technical information to be exchanged for the application of vibration isolation associated with railway systems £31.00 members, £52.00 non-members GME/21/3


ISO 2577:2007

DS/1

(Edition 3)

IEC 61915-1:2007

IEC/PAS PUBLICATIONS

General rules for the development of device profiles £109.00 members, £182.00 non-members

IEC/PAS 61076:—

PEL/17/2

AMENDMENT 1:October 2007

IEC 62341-1-2:2007

Mapping of profile type 4 to network technologies £105.00 members, £175.00 non-members

IEC/TS 61836:2007

Flexible cellular polymeric materials. Determination of compression set

Plastics. Thermosetting moulding materials. Determination of shrinkage £18.00 members, £30.00 non-members PRI/21


Connectors for electronic equipment. Product requirements

ISO 2818:— IEC 61918:2007

IEC/PAS 61076-2-107:2007

Industrial communication networks. Installation of communication networks in industrial premises £115.00 members, £192.00 non-members

Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking £60.00 members, £100.00 non-members

AMT/7

EPL/48

42

Plastics. Preparation of test specimens by machining CORRIGENDUM 1:November 2007

to ISO 2818:1994 PRI/82




ISO 2834:—

ISO 3245:2007

ISO 7183:2007

Graphic technology. Laboratory preparation test prints

(Edition 3)

(Edition 2)

Rolling bearings. Needle roller bearings, drawn cup without inner ring. Boundary dimensions and tolerances £21.00 members, £35.00 non-members

Compressed air dryers. Specification and testing £44.00 members, £73.00 non-members

ISO 2834-2:2007 Liquid printing inks £24.00 members, £40.00 non-members

MCE/7

ISO 8178:— ISO 4671:2007 (Edition 3)

ISO 2846:— Graphic technology. Colour and transparency of printing ink sets for four colour printing

Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies £31.00 members, £52.00 non-members PRI/66

ISO 2846-2:2007 (Edition 2) Coldset offset lithographic printing £31.00 members, £52.00 non-members PAI/43



Machines with fixed column and movable table £66.00 members, £110.00 non-members MTE/1


(Edition 2) Steady-state test cycles for different engine applications £46.00 members, £77.00 non-members MCE/14/-/3


AMENDMENT 1:June 2007

to ISO 5593:1997 MCE/7

ISO 5801:2007 (Edition 2) Industrial fans. Performance testing using standardized airways £110.00 members, £183.00 non-members

(Edition 3)

ISO 8178-4:2007

Rolling bearings. Vocabulary

ISO 3070:—

ISO 3070-1:2007

Reciprocating internal combustion engines. Exhaust emission measurement

ISO 5593:—

Will not be implemented as a British Standard Machines tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle



PAI/43


MCE/8

ISO 8589:2007 (Edition 2) Sensory analysis. General guidance for the design of test rooms £36.00 members, £60.00 non-members AW/12


MCE/17


ISO 6360:—

ISO 8636:— Machine tools. Test conditions for bridge-type milling machines. Testing of accuracy

Dentistry. Number coding system for rotary instruments

ISO 8636-2:2007 ISO 3070-2:2007

ISO 6360-1:—

(Edition 2)

General characteristics

(Edition 3)

CORRIGENDUM 1:September 2007

Travelling bridge (gantry-type) machines £57.00 members, £95.00 non-members

Machines with movable column and fixed table £66.00 members, £110.00 non-members

to ISO 6360-1:2004

MTE/1

CH/106/4


MTE/1



ISO 3070-3:2007

ISO 6721:—

ISO/IEC 8824:—

Plastics. Determination of dynamic mechanical properties

Information technology. Abstract Syntax Notation One (ASN.1)

(Edition 3) Machines with movable column and movable table £66.00 members, £110.00 non-members

ISO 6721-9:— Tensile vibration. Sonic-pulse propagation method

ISO/IEC 8824-2:—


CORRIGENDUM 2:November 2007

to ISO 6721-9:1997

to ISO/IEC 8824-2:2002


IST/6

ISO 3166:—

PRI/21

Codes for the representation of names of countries and their subdivisions


Will not be implemented as a British Standard. Is approved as suitable for use in the UK

MTE/1


ISO 6946:2007 ISO 3166-2:2007

(Edition 2)

Country subdivision code £92.00 members, £153.00 non-members

Building components and building elements. Thermal resistance and thermal transmittance. Calculation method £49.00 members, £82.00 non-members

IDT/2/11

B/540





(Edition 2)

Information object specification

ISO/IEC 8824-4:— Parameterization of ASN.1 specifications CORRIGENDUM 1:December 2007

to ISO/IEC 8824-4:2002 IST/6


43

ISO Publications continued... ISO/IEC 8825:—

ISO 9969:2007

ISO 10438-3:2007

Information technology. ASN.1 encoding rules

(Edition 2)

(Edition 2)

ISO/IEC 8825-1:—

Thermoplastics pipes. Determination of ring stiffness £24.00 members, £40.00 non-members

General-purpose oil systems £57.00 members, £95.00 non-members

PRI/88/4


Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)


CORRIGENDUM 1:December 2007

to ISO/IEC 8825-1:2002 IST/6


PSE/17/-/6

ISO 10438-4:2007 ISO 10003:2007

(Edition 2)

Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations £54.00 members, £90.00 non-members

Self-acting gas seal support systems £52.00 members, £87.00 non-members PSE/17/-/6


SVS/1/-/1

ISO 8894:—


ISO 11079:2007

Refractory materials. Determination of thermal conductivity

ISO 10211:2007 ISO 8894-2:2007 (Edition 2) Hot-wire method (parallel) £34.00 members, £57.00 non-members RPI/1

Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations £59.00 members, £98.00 non-members

PH/9/1


B/540

Will not be implemented as a British Standard

ISO 11348:—


ISO 10303:— ISO 9073:—

Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects £54.00 members, £90.00 non-members

Industrial automation systems and integration. Product data representation and exchange

Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)

ISO 11348-1:2007

Test methods for nonwovens

(Edition 2)

ISO 10303-219:2007 ISO 9073-16:2007 Determination of resistance to penetration by water (hydrostatic pressure) £24.00 members, £40.00 non-members TCI/24


Application protocol: Dimensional inspection information exchange £122.00 members, £203.00 non-members AMT/4


Method using freshly prepared bacteria £44.00 members, £73.00 non-members EH/3/5


ISO 11348-2:2007 (Edition 2)

ISO 9233:— Cheese, cheese rind and processed cheese. Determination of natamycin content

ISO 9233-1:2007 Molecular absorption spectrometric method for cheese rind £34.00 members, £57.00 non-members AW/5


ISO/TR 10400:2007 Petroleum and natural gas industries. Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing £110.00 members, £183.00 non-members

EH/3/5

PSE/17/-/5

(Edition 2)


Method using freeze-dried bacteria £44.00 members, £73.00 non-members


ISO 11348-3:2007

EH/3/5

ISO 10438:—


Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries

ISO/IEC 11404:2007

ISO 9233-2:2007

(Edition 2)

High-performance liquid chromatographic method for cheese, cheese rind and processed cheese £31.00 members, £52.00 non-members

ISO 10438-1:2007

AW/5

General requirements £70.00 members, £117.00 non-members


Method using liquid-dried bacteria £44.00 members, £73.00 non-members

(Edition 2)

Information technology. General purpose datatypes (GPD) £81.00 members, £135.00 non-members IST/5


PSE/17/-/6


ISO 11843:—

ISO 10438-2:2007

ISO 11843-2:—

(Edition 2)

Methodology in the linear calibration case

Special-purpose oil systems £70.00 members, £117.00 non-members

CORRIGENDUM 1:October 2007

STI/33

PSE/17/-/6

SS/6




Capability of detection

ISO 9588:2007 (Edition 2) Metallic and other inorganic coatings. Postcoating treatments of iron or steel to reduce the risk of hydrogen embrittlement £21.00 members, £35.00 non-members

44


to ISO 11843-2:2000


ISO Publications continued... ISO 12402:—

ISO/IEC 13818:—

ISO 14156:—

Personal flotation devices

Information technology. Generic coding of moving pictures and associated audio information

Milk and milk products. Extraction methods for lipids and liposoluble compounds AMENDMENT 1:December 2007

to ISO 14156:2001

ISO 12402-5:—


Buoyancy aids (level 50). Safety requirements CORRIGENDUM 1:December 2006

ISO/IEC 13818-1:—

AW/5

to ISO 12402-5:2006

Systems


PH/3/6



to ISO/IEC 13818-1:2007 £7.00 members, £12.00 non-members IST/37

ISO 12647:— Graphic technology. Process control for the production of half-tone colour separations, proof and production prints


ISO 14313:2007 (Edition 2) Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves £75.00 members, £125.00 non-members PSE/17/2


ISO/IEC 13818-2:— Video. Support for colour spaces

ISO 12647-7:2007

AMENDMENT 2:October 2007

Off-press proofing process working directly from digital data £41.00 members, £68.00 non-members

to ISO/IEC 13818-2:2000

PAI/43



ISO 14469:— Road vehicles. Compressed natural gas (CNG) refuelling connector

£7.00 members, £12.00 non-members IST/37

ISO 14469-2:2007 20 MPa (200 bar) connector, size 2 £46.00 members, £77.00 non-members GSE/40


ISO 13370:2007

ISO/IEC 13818-7:—

(Edition 2)

Advanced Audio Coding (AAC)

Thermal performance of buildings. Heat transfer via the ground. Calculation methods £63.00 members, £105.00 non-members


ISO 14488:2007

to ISO/IEC 13818-7:2006

B/540

IST/37


Particulate materials. Sampling and sample splitting for the determination of particulate properties £52.00 members, £87.00 non-members



ISO 13492:2007 (Edition 2)

LBI/37


ISO/IEC 14496:—

ISO/TR 14121:—

Information technology. Coding of audio visual objects

Financial services. Key management related data element. Application and usage of ISO 8583 data elements 53 and 96 £28.00 members, £47.00 non-members

Safety of machinery. Risk assessment

IST/12

ISO/TR 14121-2:2007

Systems


Practical guidance and examples of methods £75.00 members, £125.00 non-members


MCE/3



IST/37

ISO 13584:—

ISO/IEC 14496-1:—

Industrial automation systems and integration. Parts library


ISO/IEC 14496-4:—

ISO 13584-26:— Logical resource: Information supplier identification

Help Us to Help You!


to ISO 13584-26:2000 £7.00 members, £12.00 non-members

Always quote your Customer Number

AMT/4


to ISO/IEC 14496-1:2004

Don’t know your number?

Conformance testing AMENDMENT 19:December 2007



ISO/IEC 14496-4:— ISO 13769:2007 (Edition 2) Gas cylinders. Stamp marking £34.00 members, £57.00 non-members

Contact Customer Services 020 8996 9001


to ISO/IEC 14496-4:2004 £7.00 members, £12.00 non-members

who will be happy to check it for you

PVE/3/7

IST/37



46

Conformance testing



ISO Publications continued... ISO/IEC 14496-4:—

ISO 15302:2007

ISO 15985:—

Conformance testing

(Edition 2)


Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reversephase high performance liquid chromatography method £28.00 members, £47.00 non-members

Plastics. Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions. Method by analysis of released biogas



AW/307


CORRIGENDUM 1:November 2007

to ISO 15985:2004 PRI/21


ISO/IEC 14496-5:—

ISO 15364:2007

Reference software

(Edition 2)


Ships and marine technology. Pressure/vacuum valves for cargo tanks £44.00 members, £73.00 non-members



ISO/IEC 14496-5:— Reference software AMENDMENT 11:December 2007

SME/32/-/3

Will be implemented as a technically equivalent British Standard by amendment to a National Standard

IST/37


Gas cylinders. Residual pressure valves. General requirements and type testing AMENDMENT 1:December 2007

to ISO 15996:2005 £7.00 members, £12.00 non-members PVE/3/1


ISO 15439:— Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar. Polyamid (PA)


ISO 15996:—

ISO 15439-1:2007 General £44.00 members, £73.00 non-members

ISO 16602:2007 Protective clothing for protection against chemicals. Classification, labelling and performance requirements £57.00 members, £95.00 non-members PH/3/3


PRI/88/2


ISO 16702:2007 ISO/IEC 14496-10:— Advanced Video Coding AMENDMENT 2:December 2007


ISO 15439-2:2007 Pipes £24.00 members, £40.00 non-members PRI/88/2


IST/37


Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering £59.00 members, £98.00 non-members

ISO 15439-3:2007

PRI/88/2


ISO 14683:2007 (Edition 2) Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values £44.00 members, £73.00 non-members

ISO/IEC/TR 15443-3:2007

PSE/17/-/4

Analysis of assurance methods £70.00 members, £117.00 non-members


Flow-control devices for side-pocket mandrels £92.00 members, £153.00 non-members

IST/33


ISO 17412:2007

ISO/IEC/TR 15938:—

Oil of fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare) £28.00 members, £47.00 non-members

Information technology. Multimedia content description interface

AW/54


ISO/IEC/TR 15938-8:— AMENDMENT 3:December 2007

ISO 15112:2007

to ISO/IEC TR 15938-8:2002

Natural gas. Energy determination £70.00 members, £117.00 non-members


PTI/15


48

Petroleum and natural gas industries. Drilling and production equipment

ISO 17078-2:2007

Extraction and use of MPEG-7 descriptions


ISO 17078:—

Information technology. Security techniques. A framework for IT Security assurance

B/540



ISO/IEC/TR 15443:—

IST/5


Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography £54.00 members, £90.00 non-members EH/2/2

Fittings £21.00 members, £35.00 non-members

ISO/IEC 14651:2007 (CD ROM)

(Edition 2)

IST/37


ISO/TS 17924:2007 Soil quality. Bioavailablity of metals in contaminated soil. Physiologically based extraction method £36.00 members, £60.00 non-members EH/4



ISO/IEC 18051:2007

ISO/IEC 19784:—

ISO/IEC 21000-14:2007

(Edition 4)

Information technology. Biometric Application Programming Interface

Conformance testing £92.00 members, £153.00 non-members

Information technology. Telecommunications and information exchange between systems. Services for Computer Supported Telecommunications Applications (CSTA) Phase III £158.00 members, £263.00 non-members

IST/37

ISO/IEC 19784-1:— BioAPI Specification



IST/6

to ISO/IEC 19784-1:2006


£75.00 members, £125.00 non-members IST/44

ISO/TS 21308:— Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)


ISO/IEC 18056:2007 (Edition 3) Information technology. Telecommunications and information exchange between systems. XML Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III £146.00 members, £243.00 non-members IST/6


ISO/IEC 19785:— Information technology. Common Biometric Exchange Formats Framework

ISO/TS 21308-4:2007 Mapping to STEP application protocol AP 239 £52.00 members, £87.00 non-members AUE/9


ISO/IEC 19785-3:2007 Patron format specifications £75.00 members, £125.00 non-members IST/44

ISO 21438:— Workplace atmospheres. Determination of inorganic acids by ion chromatography


ISO 18589:— Measurement of radioactivity in the environment. Soil

ISO 18589-2:2007

ISO/IEC 19794:— Information technology. Biometric data interchange formats

Guide for the selection of sample areas, sampling, transport and conservation of soils £46.00 members, £77.00 non-members NCE/2

to ISO/IEC 19794-5:2005




ISO 21809:— Petroleum and natural gas industries. External coatings for buried and submerged pipelines used in pipeline transportation systems


ISO/IEC TR 19795:—


Information technology. Biometric performance testing and reporting

ISO 18902:2007

ISO/IEC TR 19795-3:2007

(Edition 2)

Modality-specific testing £41.00 members, £68.00 non-members

NCE/2


Face Image Data

IST/44

Method for the pre-processing of soil samples £44.00 members, £73.00 non-members

Non volatile acids (sulphuric acid and phosphoric acid) £49.00 members, £82.00 non-members EH/2/2

ISO/IEC 19794-5:—

ISO 18589-3:2007

ISO 21438-1:2007

ISO 21809-2:2007 Fusion-bonded epoxy coatings £57.00 members, £95.00 non-members PSE/17/2


Imaging materials. Processed imaging materials. Albums, framing, and storage materials £36.00 members, £60.00 non-members

IST/44


ISO 22010:2007 Space systems. Mass properties control £34.00 members, £57.00 non-members ACE/68/-/1

CPW/42



ISO 19902:2007 ISO 19712:— Plastics. Classification and performance of decorative solid surfacing material

Petroleum and natural gas industries. Fixed steel offshore structures £116.00 members, £193.00 non-members

ISO 22442:— Medical devices utilizing animal tissues and their derivatives

B/525/12


ISO 19712-2:2007 Sheet goods £59.00 members, £98.00 non-members PRI/76


ISO 22442-1:2007 ISO/IEC 21000:— Information technology. Multimedia framework (MPEG-21)

ISO/IEC 21000-7:2007 (CD ROM)

Solid surface shapes. Determination of properties £57.00 members, £95.00 non-members

Digital Item Adaptation £140.00 members, £233.00 non-members

PRI/76



CH/194/100


ISO 19712-3:2007


Application of risk management £46.00 members, £77.00 non-members

IST/37


ISO 22442-2:2007 Controls on sourcing, collection and handling £36.00 members, £60.00 non-members CH/194/100


49

ISO Publications continued... ISO 22442-3:2007

ISO 24512:2007

ISO 26243:2007

Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents £44.00 members, £73.00 non-members

Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services £66.00 members, £110.00 non-members

Cards for cotton spinning. Vocabulary and principles of construction £28.00 members, £47.00 non-members

CH/194/100


CB/503

TCI/33



ISO/IEC 29642:2007 ISO 22889:2007 Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint £63.00 members, £105.00 non-members

ISO/TS 24534:— Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles

ISE/NFE/4/4


Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes perside (recording speed 2,4x) £92.00 members, £153.00 non-members ICT/-/1

ISO/TS 24534-1:2007


Architecture £28.00 members, £47.00 non-members

ISO 22899:—

EPL/278

ISO 29862:2007

Determination of the resistance to jet fires of passive fire protection materials


Self adhesive tapes. Determination of peel adhesion properties £31.00 members, £52.00 non-members

ISO/TS 24534-2:2007

PKW/0

ISO 22899-1:2007 General requirements £57.00 members, £95.00 non-members FSH/22/14


Operational requirements £39.00 members, £65.00 non-members EPL/278


ISO/IEC 23001:—

ISO/IEC 24711:2007

Information technology. MPEG systems technologies

(Edition 2)

ISO/IEC 23001-1:— Binary MPEG format for XML AMENDMENT 1:December 2007



Method for the determination of ink cartridge yield for colour inkjet printers and multifunction devices that contain printer components £49.00 members, £82.00 non-members IST/37


ISO 29863:2007 Self adhesive tapes. Measurement of static shear adhesion £31.00 members, £52.00 non-members PKW/0


ISO 29864:2007 Self adhesive tapes. Measurement of breaking strength and elongation at break £21.00 members, £35.00 non-members PKW/0


IST/37


ISO/IEC TR 24716:2007

ISO 23996:2007

Information technology. Programming languages, their environment and system software interfaces. Native COBOL syntax for XML support £59.00 members, £98.00 non-members

ISO/PAS PUBLICATIONS

IST/5

ISO/PAS 20282:—


Ease of operation of everyday products

Resilient floor coverings. Determination of density £18.00 members, £30.00 non-members PRI/60


ISO/IEC 24755:2007 ISO 24510:2007 Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users £70.00 members, £117.00 non-members

Information technology. Screen icons and symbols for personal mobile communication devices £46.00 members, £77.00 non-members

ISO/PAS 20282-4:2007 ISO/IEC/TR 24800:— Information technology. JPSearch

50

Test method for the installation of consumer products £52.00 members, £87.00 non-members PH/9

ISO 24511:2007


PH/9



CB/503

Test method for consumer products £52.00 members, £87.00 non-members

ICT/-/1

CB/503

Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services £66.00 members, £110.00 non-members

ISO/PAS 20282-3:2007

ISO/IEC/TR 24800-1:2007 System framework and components £57.00 members, £95.00 non-members IST/37



ISO/PAS 22539:2007 Performance criteria for dwellings. Guidelines for preparation of International Standards £44.00 members, £73.00 non-members B/500
