Update Standards - September 2005 - BSI Shop

BRITISH STANDARDS BS 6000:Guide to the selection and usage

BS 7540-2:2005

BS EN 438-2:2005

Harmonized cable types from HD

Determination of properties

21 and HD 22

supersedes BS EN 438-1:1991 and BS EN 438-2:1991 ISBN 0 580 45452 5 £70.00 members £140.00 non-members

supersedes BS 7540:1994 ISBN 0 580 45501 7 £64.00 members £128.00 non-members

of acceptance sampling systems for inspection of discrete items in lots

PRI/76

GEL/20/17

BS 6000-1:2005

BS EN 438-3:2005

BS 7540-3:2005

General guide to acceptance

Classification and specifications for

National standard cables not

sampling

laminates less than 2mm thick

included in HD 21 and HD 22

supersedes BS 6000:1996 ISBN 0 580 46484 9 £53.00 members £106.00 non-members SS/5 BS 6000-2:2005

intended for bonding to supporting


substrates

GEL/20/17

Guide to sampling by attributes

BS 7910:2005


Guide to methods for assessing

PRI/76

the acceptability of flaws in metallic

BS EN 438-4:2005

structures

SS/5 BS 6000-3:2005 Guide to sampling by variables



compact laminates of thickness 2mm and greater

WEE/37

supersedes BS 6000:1996 ISBN 0 580 46417 2

Door supervisors. Code of practice

SS/5 BS 6644:2005

PRI/76


BS EN 438-5:2005 Classification and specifications for

GW/3

Specification for Installation of

supersedes BS EN 438-1:1991 and BS EN 438-2:1991 ISBN 0 580 45455 X £32.00 members £64.00 non-members

BS 7960:2005

£60.00 members £120.00 non-members


gas-fired hot water boilers of rated

flooring grade laminates less than 2mm thick intended for bonding to

inputs between 70 kW (net) and

supporting substrates

BS EN PUBLICATIONS

1.8 MW (net) (2nd and 3rd family gases)

BS EN 438:-


High-pressure decorative


laminates (HPL). Sheets based on

PRI/76

thermosetting resins (usually called

GSE/30

laminates)

BS EN 438-6:2005

BS 7540:-

BS EN 438-1:2005


Electric cables. Guide to use for

Introduction and general

exterior-grade compact laminates

cables with a rated voltage not

information

of thickness 2mm and greater



exceeding 450/750 V

BS 7540-1:2005 General guidance


PRI/76

PRI/76

GEL/20/17

BS EN PUBLICATIONS

Page 1 of 65

BS EN 438-7:2005

BS EN ISO 9514:2005

BS EN 12312-19:2005

Compact laminate and HPL

Paints and varnishes.

Aircraft jacks, axle jacks, and

composite panels for internal and

Determination of the pot life of

hydraulic tail stanchions

external wall and ceiling finishes

multicomponent coating systems.


Preparation and conditioning of

no current standard is superseded ISBN 0 580 46053 3 £32.00 members £64.00 non-members

samples and guidelines for testing

PRI/76

supersedes BS EN ISO 9514:1995 ISBN 0 580 46243 9 £32.00 members £64.00 non-members

ACE/57 BS EN 12336:2005

STI/10

BS EN 1005:-

machines, thrust boring machines,

Safety of machinery. Human physical performance

BS EN 1005-4:2005 Evaluation of working postures and

BS EN 10342:2005

auger boring machines, lining

Magnetic materials. Classification

erection equipment. Safety

of surface insulations of electrical

requirements

steel sheet, strip and laminations


no current standard is superseded ISBN 0 580 46277 3

movements in relation to machinery



B/513 ISE/NFE/5 BS EN 12618:-

PH/9/4 BS EN 1068:2005

BS EN ISO 11733:2004

Products and systems for the

Water quality. Determination of the

protection and repair of concrete

elimination and biodegradability of

structures. Test methods

organic compounds in an aqueous

Health informatics. Registration of

BS EN 12618-2:2004

medium. Activated sludge

coding systems

Determination of the adhesion of

simulation test

no current standard is superseded ISBN 0 580 46275 7 £46.00 members £92.00 non-members IST/35 BS EN ISO 2177:2004

injection products, with or without


thermal cycling. Adhesion by tensile bond strength

EH/3/5


BS EN 12264:2005

Metallic coatings. Measurement of

B/517/8

Health informatics. Categorical

coating thickness. Coulometric

structures for systems of concepts

method by anodic dissolution


supersedes DD ENV 12264:1998 ISBN 0 580 46274 9

BS EN 12697:-


for hot mix asphalt

BS EN ISO 9342:Optics and optical instruments. Test lenses for calibration of focimeters

BS EN ISO 9342-1:2005 Test lenses for focimeters used for measuring spectacle lenses

supersedes BS EN ISO 9342:1998 which remains current ISBN 0 580 46217 X £32.00 members £64.00 non-members CH/172/3

Bituminous mixtures. Test methods

IST/35

STI/33

BS EN PUBLICATIONS

Tunnelling machines. Shield

BS EN 12697-41:2005 Resistance to de-icing fluids

BS EN 12312:-


Aircraft ground support equipment. Specific requirements


BS EN 12312-8:2005

B/510/1

Maintenance stairs and platforms


BS EN 12921:-


pre-treatment of industrial items

Machines for surface cleaning and

ACE/57

using liquids or vapours

Page 2 of 65

BS EN 12921-3:2005

BS EN 13925-3:2005

BS EN 14321-1:2005

Safety of machines using

Instruments

Definition and description

flammable cleaning liquids


no current standard is superseded ISBN 0 580 46363 X £46.00 members £92.00 non-members


WEE/46

B/520/1

MCE/3/8 BS EN 14179:-

BS EN 14510:2005

BS EN 13020:2004

Glass in building. Heat-soaked

Adhesives for leather and footwear

Road surface treatment machines.

thermally-toughened soda lime

materials. Solvent-based and

Safety requirements

silicate safety glass

dispersion adhesives.


Determination of sole positioning

BS EN 14179-1:2005

tack (spotting tack)

Definition and description

B/513 BS EN 13463:-



PRI/52 B/520/1

Non-electrical equipment for use in

BS EN 14580:2005

potentially explosive atmospheres

BS EN 14179-2:2005

BS EN 13463-2:2004

Evaluation of conformity/product

Protection by flow restricting

standard

enclosure "fr"



Natural stone test methods. Determination of static elastic modulus

no current standard is superseded ISBN 0 580 46427 X B/520/1

BS EN 13463-6:2005

BS EN 14190:2005

Protection by control of ignition

Gypsum plasterboard products

source $0Qb$0R

from reprocessing. Definitions,


requirements and test methods

FSH/23

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)


BS EN 14598-2:2005

B/544/2 BS EN 13779:2004 Ventilation for non-residential

BS EN 14292:2005

buildings. Performance

Adhesives. Wood adhesives.

requirements for ventilation and

Determination of static load

room-conditioning systems

resistance with increasing


temperature

RHE/2

supersedes Parts 1 to 4 of BS 5734 ISBN 0 580 46021 5 £32.00 members £64.00 non-members PRI/42 BS EN 14651:2005 Test method for metallic fibred concrete. Measuring the flexural

PRI/52 Non-destructive testing. X-ray

BS EN 14321:-

diffraction from polycrystalline and

Glass in building. Thermally

amorphous materials

toughened alkaline earth silicate safety glass

BS EN PUBLICATIONS

Methods of test and general requirements


BS EN 13925:-

B/545 BS EN 14598:-




tensile strength (limit of proportionality (LOP), residual)

no current standard is superseded ISBN 0 580 46358 3 £32.00 members £64.00 non-members B/524

Page 3 of 65

BS EN 14662:-

BS EN 14705:2005

BS EN 50117-2:-

Ambient air quality. Standard

Heat exchangers. Method of

Sectional specification for cables

method for measurement of

measurement and evaluation of

used in cabled distribution

benzene concentrations

thermal performances of wet

networks

cooling towers

BS EN 14662-1:2005 Pumped sampling followed by thermal desorption and gas chromatography

Indoor drop cables for systems operating at 5 MHz -1000 MHz

RHE/30


BS EN 14804:2005

supersedes BS EN 50117-2-1:2002 ISBN 0 580 46346 X £26.00 members £52.00 non-members EPL/46

Language study tour providers.

EH/2/3

Requirements

BS EN 50289:-


BS EN 14662-3:2005 Automated pumped sampling with in situ gas chromatography

Communication cables. Specifications for test methods

SVS/2


EH/2/3 BS EN 14667:2005

Petroleum and related products.

BS EN 50289-1-12:2005

Determination of the oxidation

Inductance

stability and corrosivity of


fire-resistant phosphate ester fluids

Surface active agents.


Determination of low boiling solvents in liquid formulations. Gas chromatographic method

BS EN 50289-1:Electrical test methods

BS EN 14832:2005



EPL/46 PTI/13


BS IMPLEMENTATIONS BS EN 14833:2005


BS ISO 2790:2004

Petroleum and related products.

CII/34

Belt drives. V-belts for the

Determination of the hydrolytic

automotive industry and

stability of fire-resistant phosphate

BS EN 14679:2005

corresponding pulleys. Dimensions

ester fluids

Execution of special geotechnical



works. Deep mixing



MCE/10

PTI/13 B/526

BS ISO 4179:2005

BS EN ISO 15614:-

Ductile iron pipes and fittings for

Specification and qualification of

BS EN 14694:2005

pressure and non-pressure

welding procedures for metallic

Flexible sheets for waterproofing.

pipelines. Cement mortar lining

materials. Welding procedure test

Waterproofing of concrete bridge decks and other concrete surfaces

BS EN ISO 15614-4:2005

trafficable by vehicles.

Finishing welding of aluminium

Determination of resistance to

castings

dynamic water pressure after


damage by pre-treatment


no current standard is superseded ISBN 0 580 46266 8 £26.00 members £52.00 non-members PSE/10 BS ISO 6550:Road vehicles. Sheath-type

WEE/36 B/546/9

BS IMPLEMENTATIONS

BS EN 50117-2-1:2005


glow-plugs with conical seating and their cylinder head housing

BS EN 50117:Coaxial cables

Page 4 of 65

BS ISO 6550-4:2005

BS ISO 11452:-

BS ISO 18395:2005

M8 x 1 glow-plugs

Road vehicles. Component test

Animal and vegetable fats and oils.


methods for electrical disturbances

Determination of

from narrowband radiated

monoacylglycerols, diacylglycerols,

electromagnetic energy

triacylglycerols and glycerol by

MCE/9 BS ISO 7876:-

Bulk current injection (BCI)

Fuel injection equipment.


Vocabulary

BS ISO 7876-5:2004

high-performance size-exclusion

BS ISO 11452-4:2005

chromatography (HPSEC)

no current standard is superseded ISBN 0 580 45921 7 £32.00 members £64.00 non-members AW/307 AUE/16

Common rail fuel injection systems

BS ISO 19119:2005


BS ISO 11529:-

Geographic information. Services

Milling cutters. Designation

MCE/22

BS ISO 11529-1:2005 Shank-type end mills of solid or

BS ISO 9349:2004

tipped design

Preinsulated ductile iron pipeline

supersedes BS ISO 11529-1:1998 ISBN 0 580 45941 1

systems

no current standard is superseded ISBN 0 580 46172 6 £70.00 members £140.00 non-members IST/36 BS ISO/IEC 19794:Information technology. Biometric



MTE/18


data interchange formats

BS ISO/IEC 19794-4:2005

PSE/10

BS ISO 11726:2004

Finger image data

Solid mineral fuels. Guidelines for


BS ISO 10005:2005

the validation of alternative

Quality management systems.

methods of analysis

Guidelines for quality plans


supersedes BS ISO 10005:1995 ISBN 0 580 46489 X £46.00 members £92.00 non-members

IST/44 BS ISO/IEC 19794-5:2005

PTI/16 QS/1

Face image data


BS ISO 14963:2003

BS ISO 10147:2004

Mechanical vibration and shock.

Pipes and fittings made of

Guidelines for dynamic tests and

crosslinked polyethylene (PE-X).

investigations on bridges and

Estimation of the degree of

viaducts

BS ISO/IEC 19794-6:2005

crosslinking by determination of the

no current standard is superseded ISBN 0 580 46145 9 £53.00 members £106.00 non-members GME/21/3

Iris image data

gel content

no current standard is superseded ISBN 0 580 46173 4 £26.00 members £52.00 non-members PRI/88/4 BS ISO 10889:-

IST/44

IST/44

Rolling bearings. Measuring

BS ISO 21848:2005

methods for vibration

Road vehicles. Electrical and electronic equipment for a supply

BS ISO 15242-2:2004 BS ISO 10889-6:2004

Radial ball bearings with cylindrical

Type E with cylindrical seat

bore and outside surface

supersedes BS ISO 10889-6:1997 ISBN 0 580 45908 X £32.00 members £64.00 non-members


BS IMPLEMENTATIONS


BS ISO 15242:-

Tool holders with cylindrical shank

MTE/1


voltage of 42 V. Electrical loads

no current standard is superseded ISBN 0 580 46412 1 £32.00 members £64.00 non-members AUE/16 MCE/7 Page 5 of 65

BS ISO 23853:2004

BS 8408:2005

BS 5395-4

Cranes. Training of slingers and

Road traffic signs. Testing and

Code of practice for the design of

signallers

performance of microprismatic

limited access stairs


retroreflective sheeting materials.

A new work item has been

Specification CORRIGENDUM 1 AMD 15899

approved to develop a new fourth

Updated standard:

recommendations for the design of

Please order by the reference:

stairs to be used in all types of

BS 8408:2005 £70.00 members £140.00 non-members

building where the minimum

MHE/3

PUBLISHED DOCUMENTS PD ISO/IEC Guide 28:2004

part to this standard. It will give

dimensions approved by building

B/509,B/509/3

Conformity assessment. Guidance on a third-party certification system

no current standard is superseded ISBN 0 580 46341 9 £46.00 members £92.00 non-members QS/3

B/208

B/557

BS 5839:-

INVITATION FOR NOMINATIONS

Fire detection and alarm systems

TO NEW BSI COMMITTEE

for buildings

The European Commission has

BS 5839-8:1998/A1:2005

recently instructed CEN to develop

DRAFTS FOR DEVELOPMENT

installation and servicing of voice

substances. In response BSI Technical Committee B/557,

Code of practice for fire safety in

Construction Products -

the design, construction and use of

Assessment of regulated

buildings

dangerous substances, has been


Code of practice for the design,

standards on regulated dangerous

DD 9999:2005

alarm systems This standard is currently being amended to update the references and terms and to provide clarification in light of recent

established to mirror the

practice. The amendment is

Contact: Alan Hall Email: [email protected]


expected to be published by

B/557

FSH/14 BS 0:-

BIP 0001:Freedom of information. A practical guide

A standard for standards

Structure and drafting. Specification The Draft for Public Comment relating to this standard, made available under reference 05/30125670 DC, can be freely

Case studies

downloaded from:


www.bsi-global.com/British_Standa

Freedom of Information Update

rds/index.xalter. Comments should be submitted by 30 September 2005.

Contact: Martin Danvers Email: [email protected]

Service (BIP 0001). Not available for sale separately.

December 2005; the standard will be fully revised in due course.

Contact: David Adamson Email: [email protected] FSH/12/1

BS 0-2

BIP 0001-6:2005

Only available as part of the

Contact: Mike Hodson Email: [email protected]

SPECIAL ANNOUNCEMENTS

for products

IT AND INFORMATION MANAGEMENT PUBLICATIONS AND PRODUCTS

control cannot be met – e.g. in re

BS 5395:Stairs, ladders and walkways

ISO 9533:1989 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method This International Standard, implemented in the UK as BS 6912-3:1990, is being revised to update its applicability to current audible warning technology. Anyone who has experience in the use of the standard is invited to submit comments on its practical a

Contact: Mike Hodson Email: [email protected] B/513/1

AMENDMENTS TO BRITISH STANDARDS

SPECIAL ANNOUNCEMENTS

Page 6 of 65

prEN 2327

prEN 2337

prEN WI 00249538

Aerospace series. Washers, lock,

Aerospace series. Spherical plain

Plastics. Recycled plastics.

with radial serrations in alloy steel,

bearings. Technical specification

Plastics recycling traceability and

cadmium plated for flight control

The Formal Vote for prEN 2337

assessment of conformity and

rods. Dimensions

has been issued with a deadline for

recycled content


comments by 8 September, 2005.


The project was not issued for


Enquiry, but is being reviewed by


the committee ACE12. If you are

enquiry, but is being reviewed by

interested in reviewing the

committee ACE/12. If you are

document, please contact the


comm


Contact: Sue Barden Email: [email protected] ACE/61/-/24

committ


prEN WI 00249544 Plastics. Recycled plastics. Characterisation of polyethylene (PE) recyclates

prEN WI 00249545 Plastics. Recycled plastics. Plastics recyclate characterisation of polypropylene (PP) recyclates

prEN 2546

prEN WI 00249546

Aerospace series. Washers, lock


prEN 2328

with radial serrations in corrosion

Characterisation of poly(vinyl

Aerospace series. Washers, tab in

resisting steel passivated for flight

chloride) (PVC) recyclates

corrosion resisting steel, cadmium

control rods. Dimensions

plated for flight control rods.


Dimensions















comm



comm


prEN WI 00249550 Plastics. Recycled plastics. Characterisation of plastics wastes

prCEN/TR WI 00249551 Plastics. Recycled plastics. Guidelines for the development of standards for recycled plastics

prEN WI 00249598 Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates

prCEN/TR 15352

The preceding work items have

Bitumen and bituminous binders.

been forwarded for CEN enquiry by

prEN 2336

Development of

CEN/TC 249 WG11. The working

Aerospace series. Bearings,

performance-related specifications

group’s objective is to develop a

spherical plain in steel with

This final draft has recently been

series of standards for the

assembly slots. Dimensions and

received for Formal Vote and

recycling of waste plastics by

loads

circulated to committee B/510/19.

means of mechanical, feedstock


Further information is available

and chemical processes. This will


from the committee secretary

enab


(below).


Contact: Ranjit Bhambra Email: [email protected] B/510/19

Contact: Alex Price Email: [email protected]

Enquiry, but is being reviewed by the committee ACE12. If you are interested in reviewing the

prEN WI 00249536



comm

Characterization of polystyrene


(PS) recyclates

BRITISH STANDARDS PROPOSED FOR CONFIRMATION

PRI/89

BRITISH STANDARDS PROPOSED FOR CONFIRMATION BS 3056:Sizes of refractory bricks

Page 7 of 65

BS 3056-1:1985

BS 721-1:1963

Specification for multi-purpose

BS 6065:1981

bricks

Methods for sampling and

RPI/1

Imperial units

MCE/5

acceptance testing of shaped

BS 721-2:1983

refractory products

BS 3056-2:1985

RPI/1

Metric units

MCE/5

Specification for bricks for use in

BS 6166:-

glass-melting furnaces

RPI/1

BS 947:1970

Lifting slings

Specification for a universal system

BS 3056-3:1986

BS 6166-1:1986

Specification for bricks for rotary

Methods of rating

for designating linear density of textiles (Tex system)

TCI/77

MHE/11

cement kilns

RPI/1 BS 3056-4:1985

BS 6166-2:1986

BS 978:-

Specification for marking

Specification for fine pitch gears

MHE/11

Specification for bricks for electric

BS 978-1:1968

arc furnace roofs

RPI/1

Involute spur and helical gears

BS 6166-3:1988

MCE/5

Guide to the selection and safe use

BS 3056-7:1992

of lifting slings for multi-purposes

MHE/11

Specification for basic bricks for steel making

RPI/1

BS 6434:1984

BS 978-2:Addendum No. 1:1959 (PD 3376:1959) Double circular arc type gears

MCE/5

Guide to the use of BS 6065

BS 3056-8:1987

'Methods for sampling and

Specification for bricks for ladles

RPI/1

BS 978-3:1952

acceptance testing of shaped

Bevel gears

refractory products'

MCE/5

RPI/1

BS 3446:Glossary of terms associated with

BS 6886:1987

refractory materials

Specification for alumino-silicate

BS 984:1990 Method for determination of net mass of retail packages of knitting

refractories for use in coke ovens

BS 3446-1:1990

RPI/1

General and manufacturing

RPI/1

BS 7243:-

Specification for fabrics for the

BS 3446-2:1990 BS 7243-1:1989

cement and other non-metallurgical

Method of sampling

reinforcement of rubber hoses

TCI/77 RPI/1

industries

RPI/1 BS 3446-3:1990

BS 188:1977

industries

RPI/1

and rot-proofed hessian sandbags

TCI/77 BS 1625-6 and 4830:1972

Methods for determination of the

Specifications for woven cotton

viscosity of liquids

BS 4207:1989

BS 1214:1977 Specification for hessian sandbags

BRITISH STANDARDS REVIEWED AND CONFIRMED

Applications in the metallurgical

TCI/77 BS 1103:1989

Refractory raw materials Applications in the coke, glass,

and rug yarns

PTI/13

Code of practice for the installation

tapes, light, medium and heavy qualities

TCI/77

BS 525:1991

of monolithic linings for steel

Specification for fibre cores for wire

chimneys and flues

RPI/1

BS 1664-8:1974

ropes

TCI/77 BS 4966:1991 BS 721:-

Specification for silica refractories

Specifications for woven cotton webbings of five qualities

TCI/77

Specification for worm gearing

for use in coke ovens

RPI/1 BRITISH STANDARDS REVIEWED AND CONFIRMED

Page 8 of 65

BS 1853:-

BS 3566:1982

BS 5246:1976

Tubular fluorescent lamps for

Specification for lightweight

Specification for pinion type cutters

general lighting service

salvage sheets for fire service use

for spur gears - 1 to 8 metric

TCI/77 BS 1853-2:1995

module

MCE/5/-/3

Specification for lamps used in the

BS 4134:1990

United Kingdom not included in BS

Method for designation of ticket

BS 5398:1976

EN 60081, BS EN 60901, BS EN

numbers of industrial sewing

Classification of methods for

threads

61195 and BS EN 61199

mounting and joining of fishing nets

TCI/77

CPL/34/1

TCI/77

BS 2007:1975

BS 4406:1969

BS 5415:-

Specification for circular gear

Specification for the designation in

Safety of electrical motor-operated

shaving cutters, 1 to 8 metric

the Tex system of netting yarns for

industrial and commercial cleaning

module, accuracy requirements

fishing nets

appliances

TCI/77

MCE/5/-/3

BS 5415-2:BS 2518:-

BS 4582:-

Specification for rotary form

Specification for fine pitch gears

relieved gear cutters

(metric module)

BS 2518-1:1954

BS 4582-1:1970

Particular requirements

BS 5415-2.2:Supplement No. 1:1986 Specification for type H industrial vacuum cleaners for dusts

Involute spur and helical gears

Diametral pitch

MCE/5

MCE/5/-/3 BS 4582-2:1978

BS 2518-2:1977

MCE/5/-/3

MCE/5/-/3 BS 2519:-

BS 4674:1971

Glossary for gears

Methods for the determination of

BS 2519-2:1976 Notation

MCE/5

CPL/61 BS 5576:1998

Hobs and cutters

Metric module

hazardous to health

Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings

TCI/77

the breaking load and knot

BS 6068:-

breaking load of netting yarns for

Water quality

fishing nets

TCI/77

BS 6068-6:Sampling

BS 2697:1976

BS 4763:1971

Specification for rack type gear

Methods for cutting knotted netting

cutters, metric module

MCE/5/-/3

to shape (tapering)

TCI/77

BS 3104:1970

BS 4881:1993

Specification for polyamide (nylon)

Specification for polypropylene film

mountaineering ropes

TCI/77

BS 6068-6.12:1996

BS 6076:1996

TCI/77 BS 5127:1974

Specification for ropes and lines for

Specification for polyolefin webbing

fire service use other than for rope

for divans and bed bases

PSE/10

gears

Specification for general purpose,

TCI/77

BS 6168:1987 Specification for non-metallic spur

BS 5221:1987 Specification for tarpaulins

use as a protective sleeving for site and factory application)

TCI/77 BS 3408:1992

Specification for polymeric film for buried iron pipes and fittings (for

TCI/77

rescue purposes

sediments

EH/3/6

cords, lines and twines

BS 3367:1999

Guidance on sampling of bottom

MCE/5

metric module gear hobs

MCE/5/-/3

BS 6170:1981 Specification for flax canvas water buckets

TCI/77 BRITISH STANDARDS REVIEWED AND CONFIRMED

Page 9 of 65

BS 7141-2:1991

BS 7676-2:1993

BS 6341:1983

Specification for cotton webbings

Determination of mechanical

Specification for fabrics for

for personal load carrying

vibrations of gear units during

camping tents

TCI/77

purposes

acceptance testing

TCI/77

BS 6710:1987

BS 7141-3:1990

Specification for dimensions of

Specification for wool tapes

BS 7848:1996 Gears. Wear and damage to gear

TCI/77

chain wheel tooth forming tools

MCE/5

MCE/5/-/3

teeth. Terminology

MCE/5 BS 7141-4:1990

BS 6894:1987

Specification for woven elastic

Specification for jute hessian

webbings containing natural rubber

BS 7862:1996 Gears. Surface temper etch

TCI/77

tubing

TCI/77

inspection after grinding

MCE/5 BS 7141-5:1990

BS 7033:-

BS 7892:2000

Specification for elastic flat braids

Cleaning and polishing cloths

containing natural rubber

Specification for seal coats on

TCI/77 BS 7033-1:1989 Specification for optical polishing

BS 7141-6:1989

cloths for use on transparent

Specification for laces for footwear

pipes and fittings

PSE/10 BS ISO 509:1996

and other purposes

plastics panels

TCI/77

TCI/77

cement mortar lined ductile iron

Pallet trucks. Principal dimensions

MHE/7 BS 7033-2:1989

BS 7141-7:1991

Specification for industrial wipers

Specification for woven cotton

from reclaimed materials, and

tapes and webbings

BS ISO 10525:1997 Counterbalanced trucks handling

TCI/77

waste yarn for cleaning and lubricating purposes

TCI/77

freight containers of 6 m (20 ft) length and above. Additional

BS 7144:1989

stability tests

Specification for flax and jute

MHE/7

fabrics for industrial use

BS 7033-3:1989

TCI/77

Specification for floorcloths and dishcloths

TCI/77

Industrial trucks operating in

BS 7200:1989

special conditions of stacking with

Specification for synthetic-fibre

load laterally displaced by powered

needlefelts

BS 7033-4:1990

TCI/77

Specification for window cleaning cloths

TCI/77

BS 7318:1990 threads made from linen (flax) or

Specification for general polishing

cotton

devices. Additional stability test

MHE/7 BS ISO TR 10828:1997

Specification for industrial sewing

BS 7033-5:1990

BS ISO 10658:1996

Worm gears. Geometry of worm profiles

MCE/5

TCI/77

cloths

TCI/77

BS ISO 13591:1997

BS 7648:1993

BS 7141:-

Specification for double braided

Narrow fabrics

ropes made from man-made fibre

Small craft. Portable fuel systems for outboard motors

GME/33

TCI/77 BS 7141-1:1991 BS 7676:-

Specification for polyamide and

Acceptance code for gears

polyolefin woven tapes and webbings

TCI/77

BRITISH STANDARDS REVIEWED AND CONFIRMED

PD 3376:Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc type gears See Addendum No. 1 to BS 978-2.

Page 10 of 65

BS AU 47:1965

BS 5550-7.5.3:1981

BS 3955:1986

Specification for advance warning

Specification for plugs and socket

Specification for electrical controls

triangle to indicate temporary

connectors

for household and similar general

CPW/4

obstructions

AUE/1 BS AU 145d:1998 Specification for retroreflecting number plates

AUE/1 BS AU 152:1970

CPL/72

for obsolescence as the industry

This standard has been

no longer uses items to the

superseded by Parts 3, 5 to 12 and

standard specifications.

15 of the BS EN 60730-2 series

BS 5550-7.5.4:1981

BS 4887:-

Specification for single pole high

Mortar admixtures

current plugs and socket

Specification for rear marking

BS 4887-1:1986

connectors

plates for vehicles

AUE/1

CPW/4

BS AU 156:1971 Recommendations for aiming of


headlamps and auxiliary lamps on

standard specifications.

B/517 Superseded by BS EN 934-3:2003

BS 4887-2:1987

motor vehicles

BS AU 162a:1976

Specification for set retarding admixtures

BRITISH STANDARDS DECLARED OBSOLESCENT

B/517 Superseded by BS EN 934-3:2003

BS 2087:-

Specification for headlamp optical

Preservative textile treatments

aiming devices

AUE/1

BS 4985:1973 Conversion table for replacing

BS 2087-1:1992

traditional yarn numbers by

Specification for treatments

BS AU 228:-

TCI/80

Impact tests on road vehicles

BS AU 228-2:1989

obsolescent as it is no longer in

Specification for measurement

use due to changes in chemicals.

This standard has been withdrawn as it is no longer used in industry

BS 5734:-

BS 2087-2:1992

instrumentation

AUE/7

Polyester moulding compounds for

Methods of test

TCI/80 This standard has been declared

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE

obsolescent as it is no longer in

BS 5550:-

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

PRI/42 EN 14598:2005

BS 5734-2:1990 Specification for dough moulding

BS EN ISO 4617:2000

Production and presentation

compounds for electrical purposes

Paints and varnishes. List of

PRI/42

equivalent terms

BS 5550-7.5.2:1981

STI/11

Specification for location lighting

This standard has been proposed

power distribution units

CPW/4

for withdrawal as it will be superseded by BS EN ISO 4618

Superseded by Parts 1 to 3 of BS EN 14598:2005

BS 5734-3:1990 Specification for dough moulding compounds for mechanical

for obsolescence as the industry standard specifications.

Methods of test Superseded by Parts 1 to 3 of BS

BS 5550-7:-


electrical and other purposes

BS 5734-1:1990

use due to changes in chemicals.

Cinematography


rounded values in the Tex System

TCI/77

This standard has been declared

techniques using optical

Specification for air-entraining (plasticizing) admixtures

This standard has been proposed for obsolescence as the industry

AUE/1

purposes


BRITISH STANDARDS WITHDRAWN

purposes

PRI/42 Superseded by Parts 1 to 3 of BS EN 14598:2005

BRITISH STANDARDS WITHDRAWN

Page 11 of 65

BS 5734-4:1990

BS 5944-5:1985

Specification for sheet moulding

Simplified method of determining

BS EN ISO 4036:2001

sound power levels from pumps

Hexagon thin nuts (unchamfered).

compounds for electrical purposes

PRI/42

Product grade B

using an anechoic chamber

FME/9/3

MCE/18

Superseded by Parts 1 to 3 of BS EN 14598:2005

BS EN ISO 4759:-

BS EN ISO 887:2000

BS 6125:1981

Plain washers for metric bolts,

Specification for natural fibre cords,

screws and nuts for general

lines and twines

purposes. General plan

TCI/77

Tolerances for fasteners

BS EN ISO 4759-3:2000

FME/9/3

Plain washers for bolts, screws and nuts. Product grades A and C

This standard has been withdrawn

FME/9/3

BS EN ISO 898:-

as it is no longer used in industry

Mechanical properties of fasteners

BS EN ISO 7089:2000

BS 6275:Hydraulic fluid power filter elements

BS EN ISO 898-6:1996

Plain washers. Normal series.

Nuts with specified proof load

Product grade A

FME/9/2

values. Fine pitch thread

FME/9

BS 6275-3:1988 Specification for marking

MCE/18 This standard has been withdrawn

BS EN ISO 7090:2000

BS EN ISO 4014:2001

Plain washers, chamfered. Normal

Hexagon head bolts. Product

series. Product grade A

FME/9/2

grades A and B

as it is no longer considered

FME/9/3

relevant

BRITISH STANDARDS UNDER REVIEW

BS EN ISO 4016:2001

Plain washers. Normal series.

Hexagon head bolts. Product

Product grade C

joints for hydraulic purposes

MCE/18

FME/9/2

grade C

FME/9/3

BS 778:1966 Specification for steel pipes and

Plain washers. Small series.

Hexagon head screws. Product

Product grade A

FME/9/2

grades A and B

FME/9/3

MCE/18

Hexagon head screws. Product

BS EN ISO 7093-1:2000

grade C

FME/9/3

BS 5630:1978 Specification for interface

BS EN ISO 4032:2001

dimensions of snap-on connections

Hexagon nuts, style 1. Product

for use with electrically controlled

grades A and B

hydraulic equipment

BS EN ISO 7093:Plain washers. Large series

BS EN ISO 4018:2001

for fluid power applications

BS EN ISO 7092:2000

BS EN ISO 4017:2001

BS 5327:1976 Specification. Swept elbow bends

BS EN ISO 7091:2000

Product grade A

FME/9/2 BS EN ISO 7093-2:2000 Product grade C

FME/9/3

FME/9/3 MCE/18

BS EN ISO 7094:2000

BS EN ISO 4033:2001 BS 5944:-

Hexagon nuts, style 2. Product

Measurement of airborne noise

grades A and B

from hydraulic fluid power systems

Plain washers. Extra large series. Product grade C

FME/9/3

FME/9/3

and components

BS EN ISO 8673:2001

BS EN ISO 4034:2001

Hexagon nuts, style 1, with metric

Hexagon nuts. Product grade C

BS 5944-4:1984

FME/9/3

Method of determining sound

fine pitch thread. Product grades A and B

power levels from valves

FME/9/3

BS EN ISO 4035:2001

controlling flow and pressure

MCE/18

Hexagon thin nuts (chamfered). Product grades A and B

FME/9/3 BRITISH STANDARDS UNDER REVIEW

Page 12 of 65

BS EN ISO 8674:2001

BS EN ISO 15974:2001

05/19976765 DC

Hexagon nuts, style 2, with metric

Closed and blind rivets with break

BS ISO 11783-11 Tractors and

fine pitch thread. Product grades A

pull mandrel and countersunk

machinery for agriculture and

and B

head. AIA/St

FME/9/3

forestry. Serial control and

FME/6

BS EN ISO 8675:2001

BS EN 20898:-

Hexagon thin nuts (chamfered)

Mechanical properties of fasteners

communications data network. Part 11. Mobile data element dictionary

AGE/6 05/19977735 DC

with metric fine pitch thread.

BS EN 20898-7:1995

Product grades A and B

FME/9/3

BS ISO 11662-2 Mobile cranes.

Torsional test and minimum

Experimental determination of

torques for bolts and screws with

BS EN ISO 8676:2001

crane performance. Part 2.

nominal diameters 1 mm to 10 mm

FME/9

Hexagon head screws with metric fine pitch thread. Product grades A

FME/9/3

Comments for the above document

Railway applications. Rolling stock.

are required by 14 October, 2005

Pantographs: characteristics and

BS EN ISO 8765:2001

tests

05/19978547 DC

Hexagon head bolts with metric fine pitch thread. Product grades A

BS EN 50206-2:1999

and B

Pantographs for metros and light

FME/9/3

loading

MHE/3/5

BS EN 50206:-

and B

Structural competence under static

BS EN 15301 Surfaces for sports areas. Determination of rotational resistance

rail vehicles

PRI/57

GEL/9 BS EN 10274:1999

05/19986699 DC

BS ISO 1998:-

Metallic materials. Drop weight tear

BS EN 1829-2 High pressure

Petroleum industry. Terminology

test

cleaners. High pressure water jet

ISE/NFE/4/1

machines. Safety requirements.

BS ISO 1998-6:2000 Measurement

BS EN 10275:1999

Part 2. Hoses, hose lines and joints

PTI/13

Metallic materials. Tube ring hydraulic pressure test

ISE/NFE/4/1

high-pressure water jet machines

BS ISO 1998-99:2000

and water jet cutters as well as

General and index

PTI/13

BS EN ISO 10683:2000 Fasteners. Non-electrolytically

PD 6487:1979

applied zinc flake coatings

FME/9/2

MCE/6

BS 6262-7 Glazing for buildings. Part 7. Code of practice for the

fire resistant hydraulic fluids

MCE/18

Blind rivets. Terminology and

safety devices to safeguard join

05/19990339 DC

Guide for calculating the life of ball bearings when used in contact with

BS EN ISO 14588:2001

for high-pressure cleaners,

provision of information

B/520/4

definitions

FME/6 BS EN ISO 14589:2001

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

Blind rivets. Mechanical testing

04/30118212 DC

FME/6

05/19993009 DC BS EN 15306 Surfaces for outdoor sports areas. Determination of resistance to wear of synthetic turf

BS 8469 Personal protective

PRI/57

equipment for firefighters.

BS EN ISO 15973:2001 Closed and blind rivets with break pull mandrel and protruding head.

Assessment of ergonomic

05/30057625 DC

performance and compatibility.

BS 5852 Method of test for

Requirements and test methods

AIA/St

FME/6

PH/14

assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources

FW/6 Comments for the above document are required by 21 October, 2005 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

Page 13 of 65

05/30098212 DC

05/30107533 DC

05/30063592 DC

BS 6807 Methods of test for the

ISO 10303-224 Industrial

EN 15084 Liming materials.

assessment of the ignitability of

automation systems and

Determination of the lime

mattresses, upholstered divans

integration. Product data

requirement. Guidelines, principles

and upholstered bed bases with

representation and exchange. Part

and parameters

flaming types of primary and

224. Application protocol.

CII/37

secondary sources of ignition

Mechanical product definition for

FW/6

05/30063596 DC


EN 14984 Liming materials.

features £47.00 members £94.00 non-members


Determination of product impact on soil pH. Soil incubation method

process planning using machining

AMT/4

05/30098254 DC

CII/37

ISO 23309 Hydraulic fluid power.

05/30107754 DC

Piping systems. Methods for

05/30077799 DC

ISO/IEC 24709-1 Conformance

cleaning and flushing

ISO 10303-522 Industrial

MCE/18/-/6

automation systems and integration. Product data

05/30098700 DC

representation and exchange. Part

ISO 9680 Dental operating light

testing for BioAPI. Part 1. Methods and procedures £33.00 members £66.00 non-members

IST/44

CH/106/6

522. Application interpreted construct. Machining features £18.00 members £36.00 non-members

AMT/4

05/30103133 DC

05/30108617 DC

BS EN 15276 Fixed firefighting

ISO 16000-5 Indoor air. Sampling strategy for volatile organic

systems. Condensed aerosol

compounds (VOCs)

extinguishing systems. Part 2.

05/30079180 DC

EH/2/3

Design, installation and

BS 3084 Specification for slide

maintenance

fasteners

TCI/66 Comments for the above document

FSH/18/6 Comments for the above document are required by 30 September,


mechanisms

IST/33

EN ISO 22442-1 Medical devices

analysis of aluminosilicate


utilizing animal tissues and their

refractory products. Part 1.


derivatives. Part 1. Application of

General methods

RPI/1 05/30092093 DC ISO 24314 Structural steels. Steels for seismic improved resistance for

technology. Security techniques. Part 3. Discrete logarithm based

05/30106190 DC

ISO 21587-1 Wet chemical

ISO/IEC 14888-3 Information Digital signatures with appendix.

2005

05/30085737 DC

05/30108761 DC

risk management

CH/194/100

05/30109604 DC ISO 21348 Space environment

05/30106194 DC

(natural and artificial). Process for


determining solar irradiances

ACE/68/-/4


building

ISE/12

derivatives. Part 2. Controls on

05/30111949 DC

sourcing, collection and handling

CH/194/100

05/30097406 DC ISO 11979-6 Ophthalmic instruments. Intraocular lenses. Part 6. Shelf-life and transport

CH/172/7

Positive displacement pumps,

05/30106198 DC

motors and integral transmissions.


Methods of testing and presenting basic steady state performance


stability

ISO 4409 Hydraulic fluid power.

MCE/18/-/8

derivatives. Part 3. Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents

CH/194/100 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

Page 14 of 65

05/30114055 DC

05/30121972 DC

05/30124996 DC

BS ISO/IEC 15944-5 Information

BS 4841-2 Rigid polyurethane


technology. Business agreement

(PUR) and polyisocyanurate (PIR)


semantic descriptive techniques.

products for building end-use


Part 5. Identification and mapping

applications. Part 2. Specification


of various categories of

for laminated insulation boards for


jurisdictional domains as sources

internal wall linings and ceilings

pitched roofs

PRI/72/4

of external constraints £33.00 members £66.00 non-members

PVE/1

05/30124112 DC

05/30125016 DC

ISO 20903 Surface chemical



analysis. Auger electron



spectroscopy and X-ray


photoelectron spectroscopy.


Methods used to determine peak


intensities and information required

floors

IST/40

05/30117337 DC EN 725-1 Advanced technical ceramics. Methods of test for

PRI/72/4

when reporting results

ceramic powders. Part 1.

CII/60 05/30125021 DC

Determination of impurities in alumina

RPI/13 05/30117347 DC EN 725-10 Advanced technical

05/30124175 DC

BS 7799-3 Information security


management systems. Part 3.


Guidelines for information security

products for building and end-use

risk management

BDD/2


ceramics. Methods of test for ceramic powders. Part 10. Determination of compaction

for laminated insulation boards


(floorboards) with auto-adhesively


bonded facings for use as

properties

RPI/13

05/30125032 DC

roofboard thermal insulation c

PRI/72/4

EN 14678-2 LPG equipment and accessories. Equipment for

05/30121957 DC BS 4841-1 Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications. Part 1. Specification

05/30124579 DC

liquefied petroleum gas automotive

ISO TS 22028-2 Photography and

filling stations. Part 2. Components

graphic technology. Extended

other than dispensers, and

colour encodings for digital image

installation requirements

PVE/19

storage, manipulation and


interchange. Part 2. Reference

wall cavities

PRI/72/4

05/30125670 DC

output medium metric RGB colour

BS 0-2 A standard for standards.

image encoding (ROMM RGB)

CPW/42

05/30121961 DC BS 4841-3 Rigid polyurethane

Specification £0.00 members £0.00 non-members

05/30124582 DC


ISO TS 22028-3 Photography and

products for building and end-use

This document can be freely

graphic technology. Extended


downloaded from:

colour encodings for digital image

for laminated insulation boards

www.bsi-global.com/British_Standa

storage, manipulation and

(roofboards) with auto-adhesively

rds/index.xalter. Comments are

interchange. Part 3. Reference

bonded facings for use as

required by 30 September, 2005

input medium metric RGB

roofboard thermal insulation fo

PRI/72/4

Part 2. Structure and drafting.

(RIMM-RGB)

CPW/42

05/30126030 DC BS 5502-11:2005 Buildings and structures for agriculture. Part 11. Guide to regulations and sources of information

B/549


Page 15 of 65

05/30126727 DC

05/30129997 DC

05/30130008 DC

ISO 22889 Metallic materials.

BS F 158 Properties of elastomeric


Method of test for the

toroidal sealing rings ('O' rings)


determination of resistance to

manufactured from fluorocarbon

manufactured from fluorocarbon

stable crack extension using

rubber material. Specification

low compression set rubber

ACE/65/-/25

specimens of low constraint

ISE/NFE/4/4 Comments for the above document

ACE/65/-/25


are required by 1 December, 2005

material. Specification


Comments for the above document are required by 10 October, 2005

05/30129999 DC

05/30127027 DC


05/30130011 DC

ISO 6118 Road vehicles.



Elastomeric cups and seals for

manufactured from oil resistant


cylinders for hydraulic braking

silicone rubber material released

manufactured from fluorosilicone

systems using a non-petroleum

conforming to BS F 153.

rubber material released to BS F

base hydraulic brake fluid (service

Specification

154. Specification

ACE/25

temperature 70$0DC max.)

PRI/69

ACE/65/-/25





BS 5655-11 Lifts and service lifts.

05/30130001 DC

05/30130013 DC

Part 11. Code of practice for the


BS F 152 Properties of silicone

undertaking of modifications to


rubber sheet, mouldings and

existing electric lifts

manufactured from

extrusions (general purpose).

butadiene-acrylonitrile mineral oil

Specification

05/30128010 DC

MHE/4 Comments for the above document

ACE/65/-/25

resistant rubber material.

are required by 30 September,


Specification

ACE/65/-/25

2005


05/30128013 DC


BS 5655-12 Lifts and service lifts.


05/30130016 DC BS F 153 Properties of oil resistant

Part 12. Code of practice for the

05/30130004 DC

silicone rubber sheet, mouldings

undertaking of modifications to


and extrusions. Specification

existing hydraulic lifts


MHE/4

ACE/65/-/25

manufactured from



butadiene-acrylonitrile fuel and



synthetic oil resistant material.

2005

Specification

05/30130019 DC

ACE/65/-/25 05/30128320 DC


ISO 23275-1 Animal and vegetable


fats and oils. Determination of

BS F 154 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification

ACE/65/-/25

cocoa butter equivalents in cocoa

05/30130006 DC

butter and plain chocolate. Part 1.





Detection

AW/307

manufactured from ethylene-propylene rubber material

05/30128325 DC

conforming to BS F 156.

ISO 23275-2 Animal and vegetable

ACE/65/-/25

cocoa butter equivalents in cocoa


butter and plain chocolate. Part 2.


Quantification

AW/307


BS F 156 Properties of fluid resistant ethylene-propylene

Specification

fats and oils. Determination of

05/30130028 DC

rubber sheet, mouldings and extrusions. Specification

ACE/65/-/25 Comments for the above document are required by 10 October, 2005

Page 16 of 65

05/30130031 DC

05/30133477 DC

05/30135676 DC

BS F 157 Properties of high tear

ISO 18213-4 Nuclear fuel

EN 15272-2 Inland navigation

strength silicone rubber sheet,

technology. Tank calibration and

vessels. Rope leading. Part 2.

mouldings and extrusions.

volume determination for nuclear

Fairlead

Specification

materials accountancy. Part 4.

ACE/65/-/25

SME/32/7

Accurate determination using a



slow bubbling rate of liquid height



in accountancy tanks equipped

2005

with dip tubes

05/30130329 DC

NCE/9

EN 71-2 Safety of toys. Part 2.

05/30135705 DC ISO 16812 Petroleum,

05/30133480 DC

petrochemical and natural gas


industries. Shell-and-tube heat



exchangers

are required by 31 August, 2005


Flammability

CW/15

05/30130618 DC ISO/IEC 19784-2 BioAPI. Biometric

PSE/17/-/6



Accurate determination using a

are required by 1 November, 2005

rapid bubbling rate of liquid height

application programming interface.

05/30135750 DC

in accountancy tanks equipped

Part 2. Biometric archive function

ISO 7240-10 Fire detection and

with dip tubes

provider interface

NCE/9

IST/44

alarm systems. Part 10. Point-type flame detectors

FSH/12

05/30133483 DC

05/30131891 DC ISO 20998-1 Particle characterization by acoustic






methods. Part 1. Ultrasonic

05/30135759 DC


attenuation spectroscopy

LBI/37

ISO 13292 Copper, lead, zinc and

Accurate in-tank determination of

nickel concentrates. Experimental

liquid density in accountancy

05/30133471 DC

methods for checking the bias of

vessels equipped with dip tubes

NCE/9

ISO 18213-2 Nuclear fuel technology. Tank calibration and

05/30134477 DC


EN 15274 General purpose

toys

Data standardization for tank

CPL/61/21

calibration

NCE/9



Characterisation of anaerobic

compatibility (EMC). Product family


emission standard for wire-line

Procedural overview

NCE/9

PRI/52

EN 15275 Structural adhesives.

EN 50471 Electromagnetic


Requirements and test methods

05/30135775 DC

05/30135559 DC


adhesives for structural assembly.

are required by 30 September, 2005

05/30133474 DC

NFE/36 05/30135769 DC

EN 50088/prA4 Safety of electric


sampling

adhesives for co-axial metallic assembly in building and civil engineering structures

telecommunication networks

PRI/52

GEL/210/11 Comments for the above document

05/30135789 DC
