were prepared with three different clay types, Cloisite 15A, 25A, 30B. The ...
Karşılaştırma için ağırlıkça % 2'lik üç farklı kil örneği, Cloisite. 15A, 25A, ve 30B, ...
PRODUCTION AND CHARACTERIZATION OF NANOCOMPOSITE MATERIALS FROM RECYCLED THERMOPLASTICS
A THESIS SUBMITTED TO THE GRADUATE SCHOOL OF NATURAL AND APPLIED SCIENCES OF THE MIDDLE EAST TECHNICAL UNIVERSITY
BY
METİN KARABULUT
IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN THE DEPARTMENT OF POLYMER SCIENCE AND TECHNOLOGY
JULY 2003
Approval of Graduate School of Natural and Applied Sciences
Prof. Dr. Canan Özgen Director
I certify that this thesis satisfies all the requirements as a thesis for degree of Master of Science.
Prof. Dr. Ali Usanmaz Head of the Department
This is to certify that we have read this thesis and that in our opinion it is fully adequate, in scope and quality, as a thesis for the degree of Master of Science.
Prof. Dr. Ülkü Yılmazer Supervisor
Examining Committee Members
Prof. Dr. Güngör Gündüz Prof. Dr. Teoman Tinçer Prof. Dr. Ali Usanmaz Assist. Prof. Dr. Göknur Bayram Prof. Dr.Ülkü Yılmazer
ABSTRACT
PRODUCTION AND CHARACTERIZATION OF NANOCOMPOSITE MATERIALS FROM RECYCLED THERMOPLASTICS
Karabulut, Metin M.S., Department of Polymer Science and Technology Supervisor : Prof. Dr. Ülkü Yılmazer July 2003, 124 pages
Nanocomposites are a new class of mineral-field plastics that contain relatively small amounts (
