MediaPac is a trademark of Datavideo Corporation. Windows is a .... Micro tower
PC includes: 19” wide screen LCD monitor and a Decklink HD extreme card.
Oct 2010
Mobile Video Studios
DN-60 DV/HDV Field Recorder
HS-2000 Five-channel HD Mobile Studio
HD/SD Switchers
Monitors
Recorders
Chromakey
Converters
w w w . d a t a v i d e o . u s
CG Systems
TABLE OF CONTENTS Pages 05-11
MOBILE VIDEO STUDIOS
HS-2000 HS-500
MS-900
MS-800
SE-3000
SE-2000
24-24
SE-900
DVK-200
CKL-200
MP-6000 DN-200
HDR-40 DN-300
HDR-50 DN-60 DN-400 DN-500
NETWORK MEDIA
MP-1000
CG-100
CHARACTER GENERATORS
CG-300
36-37
CG-350
TFT LCD MONITORS
TLM-700 TLM-700HD/PD TLM-702HD/PD TLM-433
38-39
SE-500
DIGITAL VIDEO RECORDS
34-35
CHROMAKEY
33-33
SE-800
ITC-100
27-32
MS-500
INTERCOM SYSTEMS
25-26
SWITCHERS
12-23
HS-800
TLM-404H TLM-702 TLM-170/D/M/MD
CONVERTERS, DISTRIBUTORS AMPLIFIERS, AUDIO DELAYS
DAC-7 DAC-8 VP-445 VP-299
40-41
DAC-9
TBC-1000
TBC-5000
ACCESSORIES
Copyright symbol 2009, 2010 Datavideo Corporation, all rights reserved. MediaPac is a trademark of Datavideo Corporation. Windows is a trademark of Microsoft Corporation. Pentium is a trademark of Intel Corporation. Betacam is a trademark of Sony Corporation. All other trademarks are the property of their respective owners. Connections, specifications, and appearance of products subject to change without notice.
HS-2000 five-input HD hand-carried mobile studio The HS-2000 is a hand-carried, mobile bile studio that simplifies the workflow of any HD-SDI production venue. The HS-2000 combines 1 or 2 DVI-D sources and d3 or 4 HD-SDI sources. Based on the SE-2000 switcher, cher, it also features a 17” LCD (LED Backlit) monitor to o display a multi-view output. The built-in 4 channell audio mixer comes with a 5 channel wired intercom, om, complete with headsets, tally lights, and intercom belt packs for 4 users. Operating the HS-2000 is easyy and time-efficient because every control is right on the work surface. Program output may be recorded ed on a digital video recorder, such as the Datavideo o HDR-40/50 (not included), then monitored on thee LCD screen. Powerpoint presentations or Character ter generation software (like Datavideo’s CG-350) can be added to your live production via your computer through the DVI-D input.
17” LCD
( L ED B a c k lit m o nit o r)
ITC-50 0 Int e rc o m
LCD M o nit o r Co nt ro ls S SE-20 00 Sw it c h e r
With mobility in mind from start to finish, the aluminum case is a good combination of light weight and protective strength. The HS-2000 can n go almost anywhere.
Features
Specifications S ifi ti
Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location 1920x1080i and 1280x720p Built in digital clock and 2 logo stores Lumakey function for text overlay Picture-in-Picture function Built in TBC and frame synchronizers on all video inputs for glitch free switching A multi view image including each source, picture-in-picture preview, preview and program. It also includes 28 pre-stored logos -14 per each logo, digital clock display, five operator setup memories, title overlay and DVI-D input ideal for use with presentation software
Video Inputs: 4x HD-SDI & 1x DVI-D or 3x HD-SDI & 2x DVI-D Outputs: 2x HD-SDI & 1x HD-YUV Processing: 10-bit internal processing Audio 4x XLR microphones or line audio inputs with 48v phantom power Monitor 17-inch LED video monitor displays each source, picture-in-picture preview, preview, and program Intercom Built-in intercom system with 5 camera operator belt packs and dual color, camera mounted tally lights Power DC 12V input with 110/222 supply included
Rear View Au dio Input
Int e rc o m b e lt p a c k c o nn e c t o rs
H D -SD I Input
H D -SD I DVI-D Input
DVI-D Input
TA L LY Output
Au dio Output
H D -SD I Output
HDMI Input for monitoring
H D -YU V Output
Power on/off
DC In 12V
3
HS-2000 five-input HD hand-carried mobile studio
APPLICATIONS
Example Setup Diagram EXTERNAL MICROPHONES OR LINE LEVEL INPUTS
TLM-700
3 X HD-SDI SOURCES 1
HD-SDI
2
3
OR
HD-SDI TO YUV YUV
CG-350 CHARACTER GENERATOR
PC
HD-SDI or DVI
HDR-40/50 HD RECORDER
DVD RECORDER MP-6000
DAC-8
DAC-50
AUDIO RCA
HD-SDI
HS-2000
INTERNET
WEB
CV
HDMI PLAYBACK MONITOR
XLR
4
HD-SDI
PC or MAC
WEBCAST ENCODER
7’ LCD MONITOR
HDMI
HD-SDI X 4
PROJECTOR
DVI
AUDIO
AUDIO DELAY BOX AD-100
Products shown sold separately
AUDIO MIXER
DAC-8
HDMI
BUILT-IN ITC-50 INTERCOM
PC or MAC
CONNECTED as DSK
XLR AUDIO
AUDIO
VP-445
LCD SCREEN
MONITOR
OPERATOR HEADSETS
Dimensions
CG-300 / 350 Software Advanced window based character generator for SD & HD productions. Software requires Decklink HD Extreme Card or AJA Video Capture Card acting as a downstream keyer (DSK). V FKH P
,Q
P
P P
,
PCR-350HD Workstation with Software / Decklink HD Extreme This is an all inclusive workstation that comes with installed CG350 in an HP/Compaq 6000 Pro Micro tower PC includes: 19” wide screen LCD monitor and a Decklink HD extreme card.
QFK
HV
HDR 40 / 50 An HD/SD-SDI hard drive video recorder with HDMI output and XLR inputs. The HDR 50 comes with the rackmount casing.
Width: 19.6 inches (498mm) Depth: 18.1 inches (460mm) Height: 5.4 inches (139mm) Weight: 33.6lb (15.2kg) Power:110-240V AC 60 Hz / 50 Hz 3A 36W Max
Included
5x MC-1
Headsets 4
What to Order
PP ,QFKHV
DAC-8 A converter that takes the HD/SD-SDI video and audio sources and converts to HDMI.
VP-445 One in four out SDI distribution amplifier which works in either SDSDI or HD-SDI setting.
CA-SDI 50 / 100 / 150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
5x ITC-100SL
Belt Packs
5x CB-3
65ft / 20m 5pin Cable
AD-100 Audio delay box that allows synchronization of video and audio. Additional features also include traditional RCA connectors and professional XLR connectors.
MS-900 eight-input SD mobile studio
The MS-900 is a modular, eight input SD mobile studio that speeds the workflow of any SD or travelling studio. The shock mounted case of the MS-900 houses the SE-900 switcher, which can accept a variety of input boards for DV, SDI, DVI , YUV, as well as S-Video and composite video. It can store up to two logos for output display and also features a CG (Character Generator) overlay channel. You can use a CG (like Datavideo’s CG-100) as a DSK and retain access to the multiple outputs of the SE-900 switcher. It also has a built-in 17” monitor for multi-view output, which folds down into a one rack-unit space for travel. Some card options include external sync and a chromakey card that allows cuts between two cameras and two backgrounds. Additionally, it has an eight channel wired intercom with belt-packs and tally lights.
Features
Virtual studio with up to eight live camera inputs. Requires optional chromakey card
Control
Built in frame synchronizer and TBC for each channel, no external gen-lock is required for flicker free switching between all 8 inputs – in any format
Monitor
RS-232 or RS-422 control interface Advanced multi-screen monitor for confident preview of each source with next source/effect preview and program output – with overlay tally indicator
Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location
Recorder
Anti shock padding protects the MS-900 during transit
Each input card offers a composite Video Preview Output, irrespective of the input type
Intercom
Each DV and SDI video input has an audio de-embedder which provides dual channel balanced audio output
Specifications Video
Inputs: up to 8 inputs with a choice of SDI, DV, DVI, component (Y:U:V), S-Video (Y/C) & composite
Outputs: Optional SDI, DV, YUV, S-Video and/or composite
Inputs: both balanced XLR and RCA with audio delay for perfect sync with DV or SDI video sources
Outputs: one balanced XLR +/- 12Vp-p, 1 RCA stereo
Built-in DN-500 hard disk recorder for video recording or playback Keeping communication open between the camera crew, the producer, lighting, floor manager, etc. is vital in any live production. ITC-100 is an 8 channel talkback/intercom system that comes supplied complete with 8x camera man belt packs with headset/microphone & tally box indicator
Power Distribution Center
Integrated Datavideo PD-1 power distribution center provides a simple and secure solution for connecting power in the studio or in the field from a 12V source, such as a generator
5
MS-900 eight-input SD mobile studio I /O C a r d s
Rear View Easy installation of optional I/O cards including SDI, DVI, Down Stream Keyer, Genlock and more.
RP-31
All inputs are synchronized internally, so no genlock is required, even between consumer camcorders/players and computer equipments.
PD-1
SE-900
Included Cards External Control Card
SDI Overlay Card
RS-232, RS-422 & GPI control interface board allows easy integration with existing equipment that can be controlled such as tape recorders and players or presentation control panels.
A down stream keyer (DSK) board that offers both Internal and External keying options. Perfect for integration with character generator hardware/ software such as Datavideo CG-100 or CG-350.
Multi-image preview output card
Analog & DV Output Card
The multi-image output display allows all inputs, master & next source output to be displayed on a single monitor, with super-imposed tally and source info to assist the producer in a hectic live production environment.
Output card for a range of popular video formats – DV (with embedded audio from the audio delay circuit), composite video, S-Video (Y/C) and component (Y:U:V).
SDI Input Card
Analog Video Input Card
For users who work with SDI. Also includes audio de-embedding to a balanced pair. Features a useful composite monitor output for easy connection to an external preview monitor
For users who require input from a range of popular analog video formats including composite video, S-Video (Y/C) and component (Y:U:V). Built-in TBC syncs each input, enabling non-genlock gear to be used without glitches. Features a useful composite Video monitor output, for easy connection to an external preview monitor.
DVI-D & VGA Input Card
DV Input Card
Connect a computer and switch between live video and popular computer applications such as presentation and more. Perfect for live events like worship and company presentations. Features a composite monitor output, for easy connection to an external preview monitor.
For users who work with digital video (DV). The DV input board also de-embeds the audio to a pair of balanced outputs.
Four-Channel Chromakey Function Card (Optional)
SDI Output Card
I/O Cards
Dimensions
For users who work with SDI. The SDI Output board also features a useful composite Video monitor output, for easy connection to an external preview monitor.
Create a virtual chromakey video studio with glitch-free switching between up to four video inputs. You can pair 4 fore-grounds (e. g. talent/actor in front of the camera) and backgrounds (like 3D backgrounds). The internal TBC takes care of synchronizing, even nongenlock equipment, like consumer camcorders can be used.
P
PP ,QFKHV Width: 24.4inches (620mm) Depth: 25.6 inches (650mm) Height: 23.6inches (600mm) Weight: 150lb (68kg) PD1 Power Distribution Center: AC 100-240VAC 50/60HZ or DC 12V 300W 25 Amps
6
FKHV
,Q P
P
P
,QF
KHV
MS-900 MS-900 eight-channel eight-input SD SD mobile mobile studio studio Example Setup Diagram
MS-900 MOBILE STUDIO SETUP
8 X INPUTS SDI CAMERA
CG-100
MS-900
8 X INPUT CARDS
MULT-IMAGE PREVIEW
PC
DEVICE PROGRAM
SDI SDI IN
DV
PC or MAC
SDI OUT
DV CAMCORDER
PROGRAM
PREVIEW
1
2
3
4
5
6
7
8
YUV MONITOR
YUV
YUV
YUV S-VIDEO COMPOSITE
COMPUTER MP-6000
DVI / VGA
OPTIONAL CARDS DVD PLAYER COMPUTER
AUDIO OUT
AUDIO IN
AUDIO CV
CHROMAKEY BOARD
TCP/IP
WEBCAST ENCODER
WEB/NETWORK
OR
PC or MAC
DV
EXTERNAL GENLOCK
DEVICE
HDV RECORDER DN-500
AUDIO MIXER
Products shown sold separately
SDI
DAC-8
HDMI
7’ LCD MONITOR TLM-700
PROJECTOR
What to Order
OPERATOR HEADSETS
MS-900 MOBILE STUDIO - NTSC / PAL MS-900 includes Datavideo's SE-900 switcher with a pull-out, flip-up monitor that displays all incoming sources, preview and program outputs using the SE-900's multi-image output.
MP-6000 A DVD+R/RW recorder with DV input; allows recordings from most A/V sources including: cameras and analog VCRs.
MS-900 DV Includes 6x DV input cards, 2x YUV, CV, S, input cards, and 8 input SD switcher with RS-232/422 interface; and analog audio inputs on motherboard. In addition, keyboard, multi image preview card, SDI CG overlay card; and CV, YUV, S, DV video output cards, and 1 Chromakey card.
HD-40 / 50 A SD/HDI-SDI recorder with 250 GB removable HDD and two hard drive enclosures included.
MS-900 STD Includes 4x DV input cards, 4x YUV, CV, S, input cards, and 8 input SD switcher with RS-232/422 interface; and analog audio inputs on motherboard. In addition, keyboard, multi image preview card, SDI CG overlay card; and CV, YUV, S, DV video output cards, and 1 Chromakey card. MS-900 SDI Includes 6x SDI input cards, 8 input SD switcher, RS-232/422 interface; and analog audio inputs on motherboard. In addition, keyboard, multi image preview card, SDI CG overlay card; CV, YUV, S, DV video output cards, and 1 Chromakey card
TB-5 A tally box that comes with 4 indicators compatible with both the Datavideo SE-500 and SE-900.
MS-900 YUV Includes 8x YUV, CV, S, input cards, 8 input SD switcher with RS232/422 interface; analog audio inputs on motherboard. Keyboard, multi image preview card, SDI CG overlay card; and CV, YUV, S, DV video output cards, and 1 Chromakey card are also included.
CA-SDI 50 / 100 / 150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
MS-900 BROADCASTER TLM-170M, 2x TB-5, NVS-10, DN-400 or DN-500, 1x Chromakey Card. Pick from 6x YUV, CV, S Input Card and 6x DV Input Cards, assembled in a 8U aluminum case.
DAC-8 A converter that takes the HD/SD-SDI video and audio sources and converts to HDMI.
CB-3 / CB-4 / CB-76 These are 5 pin intercom and tally cables that comes in the following length: CB-3 is a 20M (65ft), CB-4 is a 50M (164ft), CB76 is a 76M(250ft).
CKL-200 Includes one Datavideo LD-1 blue/green LED ring, 1 brightness control power supply, 3 camera adaptor rings in 82mm, 72mm, and 58mm; and 2 Datavideo RF-1225FP (Fire retardant Chromakey fabric).
PCR-100SDI Workstation with Software / Decklink SDI Workstation with software for CG-100SDI installed in a HP Compaq 6000 Pro Micro tower PC ; includes a HP Compaq 19” widescreen LCD monitor and Decklink SDI card.
7
MS-800 four-input SD mobile studio AV & DV Models
At the heart of the MS-800 is the SE- 800 video/audio switcher.
DN-500 HDD player/recorder w/ removable hard drive
The SE-800 video/ audio switcher comes in DV (digital) and AV (analog) versions. You can choose which version you prefer. Each switcher allows four channels of video and up to six channels of audio to be switched. The MS-800 comes complete with an wired intercom system for 4 users. Also installed are monitors that display each input source, a preview (the next video coming up), and the program (the output).
ITC-100 Talkback/intercom system
TLM-702 2 x 7" TFT LCD Monitor Bank
The built-in DN-500 hard drive recorder can be used for playback or recording. The MS- 800 is a one-box solution that goes anywhere, becomes live in seconds. Operating the MS-800 is quick and intuitive for beginners and professionals.
TLM-404H 4 x 4" TFT LCD Monitor Bank SE-800 DV/Analog Switcher
The MS-800 (Digital Version) also has a CG (Character Generator) overlay channel, so you may use a CG (like the CG-100) as a DSK, but keep access to the multiple outputs of the switcher.
Features
Rear View
RP-1
RP-26 RP-6
An extensive rear panel accessory range ensures easy connection to existing equipment on location or in the studio Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location
Specifications Video
RP-4
PD-1
DV version – inputs: 4 inputs in DV, composite, component, and S-Video DV version – outputs: SDI, DV, composite, component, and S-Video AV version – inputs: 4 inputs in composite, component, and S-Video AV version – composite, component, and S-Video Loop through of all camera sources, not just next source and program output, for confident preview of all live sources.
Audio Inputs: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2, stereo and 2 XLR inputs Outputs: unbalanced, 2 main stereo outputs, 2 stereo XLR outputs Control RS-232 remote control interface Monitor TLM-404H for input monitoring and TLM-702 for next source and program output monitoring Recorder Built-in DN-500 hard drive recorder is for playback Intercom
Dimensions 8 8 8
HV
,QFK
P P
8 8
8
PP ,QFKHV
PP
,QFKH
V
PP V ,QFKH
Width: 23.6 inches (600mm) Depth: 24.4 inches (620mm) Height: 18.9 inches (480mm) PD-1 Power Distribution Center: AC 100-240VAC 50/60HZ or DC 12V 300W Weight: 159lb (72kg.)
8
Keeping communication open between the camera crew, the producer, lighting, floor manager, etc. is vital in any live production. ITC-100 is an eight-channel talkback/intercom system that comes supplied complete with 4x camera man belt packs wit headset/microphone & tally box indicator. Additional belt packs and extension cables available
Power Distribution Center Integrated Datavideo PD-1 power distribution center provides a simple and secure solution for connecting power in the studio or in the field from a 12V source, such as a generator
HS-800 four-input SD mobile studio The HS-800 houses the SE-800 video/ audio switcher in a compact mobile unit with wheels. It also includes a wired intercom system for up to 8 users and monitors that display each input source.
TLM-702 2 x 7" TFT LCD Monitor Bank
The built-in DN-500 hard drive recorder may be used for playback or recording. The HS-800 is a one box solution that goes anywhere, becomes live in seconds, and can webcast using the optional NVS-10.
TLM-404H 4 x 4" TFT LCD Monitor Bank ITC-100 Talkback Intercom system
The HS-800 (Digital Version) also has a CG (Character Generator) overlay channel, so you may use a CG (like the CG-100) as a DSK, but keep access to the multiple outputs of the switcher. The innovative flip-up monitor design truly makes this a mobile studio. It is compact enough to fit in the trunk of a car. The “flip up” monitor design, the “mobile studio” is compact and fits in the trunk of a car.
SE-800 DV/Analog Switcher
DN-500 HDD player/recorder with removable hard drive
USB
Connect the USB Hard Drive to a PC or MAC
Removable USB Hard Drive
Features
Rear View
An extensive rear panel accessory range ensures easy connection to existing equipment on location or in the studio Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location Anti shock padding protects the HS-800 during transit
Specifications Video Inputs: 4x DV, component, composite, and S-Video Outputs: DV, component, composite and S-Video Audio Inputs: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2, stereo and microphone inputs Outputs: unbalanced, 2 main stereo XLR outputs PD-1 RP-4
SE-800
Control RS-232 remote control interface
ITC-100
Dimensions 8
HV P P
,QFK
P P
8 8
8
Monitor TLM-404H for input monitoring and TLM-702 for next source and main output monitoring
PP ,QFKHV
8 8
Width: 23.6 inches (600mm) Depth: 30 inches (726 mm) Height: 17 inches (432 mm) PD1 Power Distribution Center: AC 100-240VAC 50/60HZ or DC 12V 300W 25 Amps Weight: 159lb (72kg.)
,QFK
HV
Recorder Built-in DN-500 hard drive recorder is for playback Intercom Keeping communication open between the camera crew, the producer, lighting, floor manager, etc. is vital in any live production. ITC-100 is an eight-channel talkback/intercom system that comes supplied complete with 4x cameraman belt packs with headset/ microphone & tally box indicator. Additional belt packs and extension cables available Power Distribution Center Integrated Datavideo PD-1 power distribution center provides a simple and secure solution for connecting power in the studio or in the field from a 12V source, such as a generator
9
MS-500 four-input SD mobile studio The MS-500 is a straight forward solution for transporting and using a Datavideo SE-500 switcher and a dual screen TLM702 monitor as one unit.
DVD Player For Illustration Only Rack Shelf
The dual screen TLM-702 monitor is prewired to use one screen for selectable quad-view of each source and the other screen for program output. It’s perfect for applications within education, houses of worship, internet streaming, live events, conferences and more. It also includes the Datavideo PD-1 and ITC-100 Intercom, for complete production versatility.
ITC-100 Talkback/Intercom
TLM-702 2 x 7" TFT LCD Monitor Bank
Outputs include: component (YUV) which could be connected to a DVD recorder or projector.
SE-500
Features
Rear View
Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location Anti shock padding protects the MS-500 during transit Can be operated from DC as well as AC power
Specifications Video Inputs: 4x composite and S-Video Outputs: 2x composite and 1x S-Video
RP-17 RP-18 PD-1
Audio Inputs: 2x unbalanced RCA and ¼” mic Outputs: 2x unbalanced RCA Control RS-232 remote control interface Monitor TLM-702 utilizes the SE-500 unique quad preview output on one of the high quality 7” TFT LCD monitors, while displaying the program output on the second 7” TFT LCD monitor
Dimensions 8
HV
LQFK
P P
PP
LQFKH
V
8
PP V LQFKH
8 8
PP LQFKHV
Width: 23.6 inches (600mm) Depth: 24.4 inches (620mm) Height: 18.9 inches (480mm) PD-1 Power Distribution Center: AC 100-240VAC 50/60HZ or DC 12V 300W Weight: 110lb (50kg.)
10
Intercom Keeping communication open between the camera crew, the producer, lighting, floor manager, etc. is vital in any live production. ITC-100 is an eight-channel talkback/intercom system that comes supplied complete with 4x camera man belt packs with headset/microphone & tally box indicator. Additional belt packs and extension cables available Power Distribution Center Integrated Datavideo PD-1 power distribution center provides a simple and secure solution for connecting power in the studio or in the field from a 12V source, such as a generator. PD-1 also provides two power outlets
HS-500 four-input SD hand-carried mobile studio The HS-500 is a light weight hand-carried solution for transporting and using a Datavideo SE-500 switcher and a dual screen TLM-702 monitor as one unit. The dual screen TLM-702 monitor is pre-wired to use one screen for selectable quad-view of each source and the other screen for program output. It’s perfect for applications within education, houses of worship, internet streaming, live events, conferences and more. CG (Character Generation) can be applied by using our Datavideo CG-100 and a Blackmagic Design Decklink ® card that overlays text and graphics on the program output (via a computer). Outputs include: component (YUV) which could be connected to a DVD recorder or projector.
Aluminum Carrying Case:
Rear View
Features
Easy adjustment of the viewing angle of the high quality TLM-702 TFT LCD monitor Fully integrated with cable loom and power supply. Connection to video sources (such as camcorders) is made easy with the quick release pivoting back panel Designed to be “live-in-seconds” with easy setup, breakdown and storage at any location Housed in a stylish and light aluminum carrying case for easy and secure transport
Specifications Video Inputs: 4x composite and S-Video Outputs: 2x composite and 1x S-Video OR 2x composite 1x component Audio Inputs: 2x unbalanced RCA and ¼” mic Outputs: 2x unbalanced RCA
Dimensions
PP
KHV P P
,QF
PP ,QFKHV
,QF
Control RS-232 remote control interface KHV
Monitor TLM-702 utilizes the SE-500 unique quad preview output on one of the high quality 7” TFT LCD monitors, while displaying the program output on the second 7” TFT LCD monitor
Width: 21.9 inches (555mm) Depth: 16.9 inches (430mm) Height: 6.1 inches (155mm) Power: 12V 4.2A DC 110/220 power supply included Weight: 110lb (50kg.)
11
SE-3000 16-input HD & SD video switcher The SE-3000 is a versatile, easy-to-use 16 input HD/ SD live production switcher filled with an impressive number of features and functions.
USB
Not only does it boast a touch screen menu to select EFX, stills, and balance colors, it has dual multi-view outputs, chromakey, dual PiP, 3D functions, multi language support and a full size keyboard. The processing unit is compact and conveniently designed to accommodate mobile applications. An interesting and powerful feature added to the SE3000 in the “Flex Source®” component, which is similar to having a second M/E. (See the next page for a connection schematic.)
RS-422 Out
Rear View Audio Input
HD/ SD-SDI Input
DETAILS Video Format Video Processing Video Input Video Output M/E Flex source Monitor Keyer (in M/E) Background DSK PiP Still Store AUX Bus Input Functions Output Functions Ergonomic Touch Screen Control Memory Function Interface Power Supply
Aux Out Audio Output
HD Program HD Preview
RS-422 In
RS-232
Tally
REF IN Multi-1 REF Loop Multi-2
GPI
DVI-D Input
Ethernet
DVD-D Output
HD/SD component Output
HD (1080/59.94i,60i,50i) - (720/59.94p, 60p, 50p) - SD (525/60NTSC,625/50 PAL) 4:2:2:4, 10 bit digital component 16x HD/SD-SDI inputs (included) 8x HD/SD-SDI outputs (included) 1x M/E with Flex Source® Powerful Flex Source® feature allows 2x PiP images with background & linear keyer Built in 7” 800x480 touch screen LCD 2x linear, luminance, chroma Wipe – 40+ patterns, single/dual colored & video borders DVE – 80+ transitions including slides, pushes, 3D spins, page turns & page rolls 2x DSK - linear & luminance 2x channel in Flex Source® 2x built in still stores, with internal storage for up to 100 uncompressed HD images 4x AUX outputs 16x inputs with 8x SD-to-HD up converter built in Dual channel multiviewer, 20x sources split on two monitors, HD-SDI, DVI & HD component Ergonomic LCD touch screen on the control panel with multi language support Internal Storage for up to 999 user memories, 8x button shot box for instant access Panel: RJ45, Editor: D-sub 9pin, Tally D-sub 37-pin, GPI D-sub 15-pin, PC: RJ45 12V DC operation 110/220 power supply and cord included
Specifications on the SE-3000 are subject to change without notice due to continual improvements.
12
DC In 12V
SE-3000 16-input HD & SD video switcher Example Setup Diagram REMOTE CONTROL PC or MAC
POWER SUPPLY
AUDIO OUTPUT X 2
DC IN 12V 10A
ETHERNET
HD-SDI OUT X4
8X HD/SD-SDI OUTPUTS
AUDIO INPUTS X 4
AUX-1
AC INPUT
16X HD/SD-SDI INPUTS
HDMI HD RECORDER HDR-50
VIDEO PROJECTOR WEB
AUX-2 WEBCAST ENCODER
INTERNET
AUX-3
HD-SDI
HDMI HD RECORDER HDR-50
AUX-4 DEVICE
7’ LCD MONITOR TLM-700HD
HD-SDI
DAC-8 MAIN PROCESSOR REAR PANEL
DVI-D
PC or MAC
DVI INPUT
REF. IN (OPTION)
DAC-8
SINGLE MULTIVIEW OUT
RJ45 TYPICAL MULTI-IMAGE PREVIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
HD-SDI
OR PROGRAM
1
2
3
5
6
7
4 8
9
10
11
12
13
14
15
16
PROGRAM
PREVIEW
AUX-1
AUX-2
PREVIEW
PREVIEW DAC-8
AC INPUT
ITC-200 INTERCOM BASE STATION
16X WIRED BELT PACK
3
4
7
8
PROGRAM
PROGRAM
DAC-8
DC IN 12V 3A POWER SUPPLY
2 6
OR
HD-SDI
HD/SD DIGITAL VIDEO SWITCHER SE-3000 CONTROL PANEL
1 5
2
3
4
5
6
7
8
9
10
11
12
14
15
TALLY
INTERCOM +TALLY
TB-30 TALLY BOX WORKS WITH DATAVIDEO TALLY LIGHTS
16 X OPERATOR HEADSETS
PROGRAM
PREVIEW
1
13
PREVIEW
AUX-1
AUX-2
1
2
3
4
9
10
11
12
5
6
7
8
13
14
15
16
16
Flex Source 1. Live or pre-recorded videos 2. PiP#1 with border 3. PiP#2 with border 4. Linear Key for CG, logo, etc...
2 1
3
Up Next: New Ideas for 2010
OR
4
This sample setup of four elements can be pre-configured and assigned to an input just as if it was a single source. This is similar to having 2 M/E on a single switcher!
What to Order
Products shown sold separately
HDR-40 / 50 Hard drive video recorder comes equipped with a 250GB removable hard disk drive and enclosure. HDR-50 comes with an additional rack mount.
TLM-700HD This is a one unit; 7” TFT HD LCD monitors that comes with an on screen display features and HD-SDI inputs.
ITC-200 (Coming Soon) An intercom that accommodates up to 16 remote users. This set includes: case station, 20M (65ft) cables, headsets, belt packs and tally lights for 8 users.
CA-SDI 50/100/150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
CG-350 - Software Only This is a Windows based character generator for SD & HD productions. Software requires Decklink HD Extreme Card or AJA Video Capture Card acting as a downstream keyer (DSK).
DAC-8 A converter that takes the HD/SD-SDI video and audio sources and converts to HDMI.
PCR-350HD Workstation with Software / Decklink HD Extreme Workstation with software for SD or HD CG-350 in a 3 RU rackmount computer with Decklink Extreme that can be used HD-SDI or SD-SDI.
CA-SDI 50 /100 /150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
TB-30 (Coming Soon) A tally box thats compatible with the Datavideo SE-3000 switcher.
PD-2 (Coming Soon) A dual DC12V power supply with two AC inputs and UPS function. If one power supply fails, the other takes over.
13
SE-2000 five-input HD video switcher The SE-2000 is a HD-SDI switcher ideal for small live production venues that use up to 5 inputs.
Multi-Image PVW out and clock display
By combining 1 or 2 DVI-D sources and 3 or 4 HD-SDI sources, any user can make the most of this flexible unit.
Preview
Program
Clock
The HD-SDI inputs may be HD cameras or small HDMI output cameras that can be used with a Datavideo DAC-9 HDMI to HDSDI converter (not included). With Datavideo’s CG-350 software, CG (character generation) may be added to any live production via computer, through the DVI-D input. PowerPoint® presentations Cam4 (DVI/HD-SDI) can also be used via the computer as a source or overlaid using the luminance key. The SE-2000’s multi-display output includes each source, preview display, program display, PiP, and a digital clock display. In addition, the system will store and recall 14 different logos. It has 5 memory settings (user-defined) and title overlay.
CAM3 (HD-SDI) Cam2 (HD-SDI) PIP Cam 5 (DVI)
Cam1 (HD-SDI)
The SE-2000's built-in audio mixer has four audio-followsvideo inputs (microphone or line), and two audio outputs. Operating the SE-2000 is easy and time-efficient because every control is right on the work surface.
RKM-2000 Monitor & Intercom Holder
Features Logo insertion - 28 pre-stored logos -14 per each logo (max 128 x 96 pixels) inserted via luminance key Luminance key, PIP, Freeze Image, Black Five individual speed keys, T-bar and TAKE key Five user preset memories 13 transitions with adjustable border width Multi preview monitor output (DVI Out)
ITC-100 Intercom
SE-2000 Switcher
Resolution
Input 1920x1080i & 1280x720p Output 1080i - 720p
Specifications
Optional Accessories
Video
ITC-100 (4 users)
RKM-2000
ITC-100 Intercom System
SE-2000 Monitor/Intercom Holder
Inputs: 4x HD-SDI & 1x DVI-D or 3x HD-SDI & 2x DVI-D Outputs: 2x HD-SDI, 1x HD-YUV & DVI (Multi-view) Processing: 10-bit internal processing
Audio
4x XLR microphone or line audio inputs
Power
DC 12V input with 110/220 supply included
Rear View
HD-SDI Input
14
Audio Input
HD-SDI In/ DVI-D In input
DVI-D Input
Audio Output
Tally
HD-SDI Output
Power Switch
Preview Output HD-YUV Output
DC In 12V
SE-2000 five-input HD video switcher Example Setup Diagram
PROGRAM
DVI OUT
2
3
4
HD-SDI
XLR
1
HD-SDI
PC or MAC
2
3
5
6
CG-350 CHARACTER GENERATOR
HD-SDI or DVI
PC
YUV
INTERCOM +TALLY
HD-SDI X 4
AUDIO
AUDIO DELAY BOX AD-100 AUDIO MIXER
OPERATOR HEADSETS
What to Order
XLR AUDIO
CONNECTED AS DSK
DVI-D Products shown sold separately
HDMI VIDEO PROJECTOR
VP-445
AUDIO
PC or MAC
HDR-40/50
DVD RECORDER MP-6000
SE-2000 CONTROL PANEL ITC-100
HD RECORDERS
CV
HD-SDI TO YUV DAC-50
INTERNET WEB
DAC-8
HD-SDI
TLM-700
PREVIEW
1 4
WEBCAST ENCODER
7’ LCD MONITOR
DAC-8
HDMI
EXTERNAL MICROPHONES
AUDIO RCA
3 X HD-SDI SOURCES
MULTI-IMAGE PREVIEW
LCD SCREEN
MONITOR
SE-2000 KIT ITC The kit includes the SE-2000, 8-channel ITC-100 intercom with 5 operator headsets, and RKM-2000 holder.
AD-100 Audio delay box that allows better synchronization of video and audio output. This unit permits traditional RCA connectors but also accommodates professional XLR connectors.
SE-2000 KIT HDR The kit includes the SE-2000, HDR-50 SD/HD-SDI Hard Drive Video Recorder and RKM-2000 holder.
TLM-700HD This is a one unit; 7” TFT HD LCD monitors that comes with on screen display features and HD-SDI inputs.
RKM-2000 Holder for SE-2000, ITC-100, and space for monitor (monitor not included).
TLM-170 A 17” monitor that comes with a 1440 x 900 high resolution, 16:9 aspect ratio, and built-in speakers with SDI inputs.
ITC-100 An intercom that accommodates up to 8 remote users. This set includes: case station, 20M (65ft) cables, headsets, belt packs and tally lights for 4 users.
DAC-8 A converter that takes the HD/SD-SDI video and audio sources and converts to HDMI.
CG-350 - Software Only This is a Microsoft Window based character generator for SD & HD productions. Software requires Decklink HD Extreme Card or AJA Video Capture Card acting as a downstream keyer (DSK).
DAC-9 A converter that takes the HDMI source and converts it to HD/SDSDI video and audio sources.
PCR-350HD Workstation with Software / Decklink HD Extreme Workstation with software for SD or HD CG-350 in a 3 RU rackmount computer with Decklink Extreme that can be used HD-SDI or SD-SDI.
VP-445 A HD/SD-SDI distribution amplifier that comes with mounting brackets.
CB-10 This is a YUV cable with sync of 4 BNC to 4 BNC (component to genlock) of 9.8 ft or 3 meter cable.
CA-SDI 50 / 100 / 150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
Dimensions
Width: 12.9 inches (330mm) Depth: 16.9 inches (430mm) Height: 3.3 inches (85mm) Power: 12V 5A DC 110/220 power supply included
15
SE-900 eight-input SD video switcher Multi-image Preview Output
The SE-900 is a two-piece eight input SD switcher designed for flexibility and ease-of-use. The SE-900 accepts any combination of up to eight input boards for DV, SDI, DVI, YUV, S-Video and composite video. It can also store 2 logos for output display, and has a CG(Character Generation) overlay channel. A user can apply CG software (like the Datavideo CG-100) as a DSK and still retain access to the multiple outputs of the SE-900 switcher. The rack mounted processing unit of the SE-900 is connected to the control panel by an RS-232 cable. Datavideo has prepared several SE-900 “kits” with various input cards included, but you may choose any configuration that you prefer for the eight slots available. Card options include external synch and a chromakey card that allows cuts between two cameras and two backgrounds.
Features Built in frame synchronizer and TBC for each channel, no external gen-lock is required for flicker free switching between all 8 inputs – in any format Voice sync - audio delayed to minus 17 frames Picture-in-Picture (two fixed sizes, able to move from off-screen to off-screen) Joystick control can work with either RGB color correction (white balance), position control for the PIP or Mosaic effect Multi-image preview panel allows the producer to monitor all live sources as well as Program & Next source SDI overlay card pre-installed – use with any SDI-based character generator with a downstream keyer (DSK) (Upgrade card) Easy titling with an optional CG-100 Character Generator Digital effects – Over 50 digital effects (including 15 transitions with borders) with six speeds, plus 6 special effects Logo overlay included – use 24-bit RGB 96x24 bitmap image or input source Eight tally outputs, red/yellow LED tally lights included Audio may be embedded in the SDI stream GPI input trigger controls up to 10 pre-programmed effects in sequence Optional chromakey card - can accept four foreground inputs, four background inputs and four chromakey settings. Internal chromakey switcher allows for glitch-free switching between the four sources and backgrounds. Background and foreground selection is through the inputs to the switcher Separate control panel and 19” rack-mountable main unit
16
Each input card offers a composite video preview output, irrespective of the input type Includes an audio delay function as well as a DV/SDI audio embedder for output. Additionally, each DV and SDI video input has an audio de-embedder which provides dual channel balanced audio output
Specifications Video Inputs: up to 8 inputs with a choice of SDI, DV, DVI, component (Y:U:V), S-Video (Y/C) & composite Outputs: SDI, DV, YUV, S-Video and/or composite Video. (2) multi-image preview outputs. (1) Normal is the next source preview. Pressing the “Preview” key shows the next effect. (2) Multi-image output - composite and component video. Audio Inputs: stereo balanced XLR’s and RCA with audio delay for perfect sync with DV or SDI video sources Outputs: stereo balanced XLR +/- 12Vp-p, 1 RCA stereo Control GPI and RS-232/RS-422 control interface Power Main unit: 12V 10A power supply included Control panel: 12V 1.2A DC operation 110/220 powersupply and cord included
SE-900 eight-input SD video switcher Rear View Audio Output Balanced & RCA
Audio Input Balanced & RCA
Control Panel Connector
Monitor Out
Power Connector Tally
RS-232 & SDI Output Preview Card RC-422 Analog Input Cards Card Card Analog & DV Chroma Key Card SDI CG OverDVI/VGA Input Card Video Output lay Card Card DV Input Card
SDI Input Cards
I/O Cards
RS-232/RS-422/GPI
DV-IN (900-DV25)
SDI CG OVERLAY
CV/S/YUV/DV OUT
CV/S/YUV IN (900-YUV)
SDI-IN (900-SDI)
PREVIEW
DVI-VGA-IN (900-DVI)
SDI-OUT (900-SDI-O)
CHROMAKEY (900-DVK)
Optional Converters
D I G I T AL V I D E O S W I T C H E R
AUDIO
C V ,S-VIDE O or Y UV IN PUT
SDI OU T
DAC-7
(WITH EMBEDDED AU D I O )
S E-900
YUV to SDI Converter 17
SE-900 eight-input SD video switcher Example Setup Diagram SDI CAMERA
CG-100
SE-900
8 X INPUT CUSTOMIZABLE CARDS
MULT-IMAGE PREVIEW
PC
PROGRAM
SDI
DV CAMCORDER
SDI IN
DV PC or MAC
COMPUTER MP-6000
DVI / VGA
AUDIO OUT
AUDIO IN AUDIO MIXER
OR
DVD PLAYER EXTERNAL GENLOCK
DEVICE
1
2
3
4
5
6
7
8
YUV MONITOR
YUV
YUV
AUDIO CV
CHROMAKEY BOARD
PC or MAC
PROGRAM
PREVIEW
YUV S-VIDEO COMPOSITE
OPTION CARDS
COMPUTER
SDI OUT
DEVICE
ITC-100 INTERCOM
TCP/IP
WEBCAST ENCODER
WEB/NETWORK
DV HDV RECORDER DN-500 SDI
DAC-8
HDMI
7” LCD MONITOR TLM-700
Products shown sold separately PROJECTOR
What to Order
OPERATOR HEADSETS
18 8
SE-900 DV KIT 6x DV Input Cards, 2x YUV, CV,S Input Card +8 Input SD Switcher & Analog Audio inputs on Motherboard . Keyboard, Multi Image Preview card, SDI CG Overlay card & CV,YUV,S, DV Video Out card.1x Chromakey Card.
DAC-7 / 7L A converter that swaps analog to SDI. DAC-7L is an individual unit without the tri-pod mount.
SE-900 STD KIT 4x DV Input Cards, 4x YUV, CV,S Input Card+8 Input SD Switcher & Analog Audio inputs on Motherboard. Keyboard, Multi Image Preview card, SDI CG Overlay card & CV,YUV,S, DV Video Out card.1x Chromakey Card.
TB-5 A tally box that comes with 4 indicators compatible with both the Datavideo SE-500 and SE-900.
SE-900 SDI KIT 6x SDI in Cards,+8 Input SD Switcher & Analog Audio inputs on Motherboard . Keyboard, Multi Image Preview card, SDI CG Overlay card & CV,YUV,S, DV Video Out card.1x Chromakey Card, 1x SDI out Card
HDR-40 /50 Hard drive video recorder comes equipped with a 250GB removable hard disk drive and enclosure. The HDR-50 is a rack mount unit.
SE-900 YUV KIT 8x YUV, CV, S Input Cards, +8 Input SD Switcher & interface & Analog Audio inputs on Motherboard . Keyboard, Multi Image Preview card, SDI CG Overlay card & CV,YUV,S, DV Video Out card.1x Chromakey Card.
TLM-404H 4 units of 4” TFT LCD composite monitor on a 19” rack mount; that is made from steel and aluminum.
SE-900 BROADCASTER TLM-170M, 2x TB-5, NVS-10, DN-400 or DN-500, 1x Chromakey Card. Pick from 6x YUV, CV, S Input Card and 6x DV Input Cards.
TLM-170 A 17” monitor that comes with a 1440x900 high resolution, 16:9 aspect ratio, and built-in speakers with SDI inputs.
ITC-100KF900 An intercom that accommodates up to 8 remote users. This set includes: case station, 20M (65ft) cables, headsets, belt packs and tally lights for 4 users.
VP-314 This is an inline DV repeater that comes with 6-pin outputs.
DN-400 / DN-500 This is a DV/HDV hard drive disk recorder that comes with a removable 250GB hard drive disk and two hard drive enclosures. The DN-500 is a rack mount unit.
CA-SDI 50 / 100 / 150 A male to male BNC cable for 50 foot, 100 foot or 150 foot correspondingly to the model number.
SE-800 four-input SD video switcher The SE-800 AV & DV video switchers are flexible solutions for any studio and are supported by a large family of Datavideo accessories. The SE-800 comes in digital and analog versions (SE-800DV and SE800AV), accommodating almost any studio set-up. The DV model includes 4 DV/AV inputs and outputs for SDI, DV, composite, component, and S-Video. It also includes an output for an SDI overlay channel for use with a CG (character generator) that uses a down stream keyer (DSK). Using the SDI overlay allows the character generator to appear in all of the SE800DV outputs. The SE-800 switchers also include an internal audio mixer with both mic and line level audio inputs. (Built-in audio delay will ensure correct lip-synch works on all formats) Both models include TBC and a format converter, so each input source may be seen with a composite video monitor. Each unit is compatible with a family of Datavideo accessories: monitor holders, shipping cases, mobile studios (and their compatible products) intercoms, character generators, and more. We have several SE-800 “kits” available that include a switcher and monitor, but you can build a kit of your own with the available accessories.
Features
SDI graphics overlay – use any SDI based character generator with DSK (down stream keyer). SE-800DV has SDI overlay built in, SE-800AV requires upgrade card
No gen-lock required – frame synchronizer and TBC built-in for each active source for flicker-free switching
Four tally outputs – requires RMC-140 with red/yellow tally lights
Input selector – main and sub bus selector. Cut direct between sources via the main bus
GPI input trigger controls 30 pre-programmed effects in sequence
Preset keys – 30 quick selection keys for preset event and effects
Voice sync – audio advanced to audio delayed, +3/-19 frame
Audio mixer – 6 channel stereo mixer for mixing the audio from video with house audio or AUX inputs or microphone
Adjustable audio delay for frame accurate and perfect synchronization between video and external audio
Video DV version – inputs: 4 inputs in DV, composite, component and S-Video DV version – outputs: SDI, DV, composite, component, and S-Video. SDI overlay for graphics or character generators
Joystick control can be used for either RGB color correction (white balance corrections) or position the PIP or Mosaic effect
Picture-In-Picture (two fixed sizes)
Color processor – brightness, contrast, and color setting white balanced for each input. Last settings saved at power up
Digital effects – 15 transitions plus border, six speeds, plus six special effects
Easy tilt with the Datavideo CG-100 character generator
Monitor output: one composite output for each input via included composite video format converters
Next source preview and tally – optional with RMC-140
Included
Specifications
AV version – inputs: 4 inputs in composite, component, and S-Video AV version – outputs: composite, component, and S-Video Audio Inputs: unbalanced, 4 sources (A, B, C, D), aux 1, aux 2, stereo Outputs: unbalanced, 2 main stereo outputs Control RS-232 remote control interface Power 15V 4.5A DC 110/220 power supply
Optional Accessories Quad 4” TFT LCD Monitor
Aluminium Accessory Case
LCD Monitor Holder
TLM-404H Dual 7” TFT LCD Monitor
TLM-702
RKM-4N7
19
SE-800 four-input SD video switcher SE-800DV Rear Panel View
GPI Interface Control via GPI interface 30 pre-programmed effects
Monitor Outputs A-D
Video Inputs A-D
Video Outputs
RS-232 Interface
Each input is looped through to a composite video monitor
Four video inputs, each with DV25, component YUV, S-Video (Y/C) and composite video
Simultaneous output of SDI, component Y:U:V, DV25, S-Video (Y/C) & composite video
Connect Datavideo’s external control boxes (RMC-90, RMC140 & RMC-120)
Dimensions
DV Input
Width: 16.5 inches (415mm) Depth: 16.8 inches (419mm) Height: 5.3 inches (135mm) Power: 15V 4.5A DC 110/220 power supply included
SE-800DV provides users with four DV25 inputs via a FireWire connector. DV25 provides optimal picture quality while at the same time easy installation and no quality loss using long cabling
GPI Interface
SE-800AV Rear Panel View
Monitor Output A-D Each input is looped through to a composite video monitor
Control via GPI interface 30 preprogrammed effects
Video Input A-D Four video inputs, component YUV, S-Video (Y/C) and composite video
Video Output Simultaneous output of SDI, component Y:U:V, DV25, S-Video (Y/C) & composite Video
Optional Accessories RMC-120 Ethernet remote controller System Requirements CPU: Pentium 4, 2.4GHz RAM: 512MB RAM Screen Resolution: 1024x768 OS: Windows XP PC/Network control box allows full control of SE-800 via Datavideo's free software (available online on our website)
20
RS-232 Interface Connect Datavideo’s external control boxes (RMC-90, RMC140 & RMC-120)
SE-800 four-input SD video switcher SE-800 SE 800 Remote Re Remot motee control mot cont c ont ontrol rol software softw so ftware ftw are (PC (P ( C Only) O nlyy ) Only
Remote Control Software
IJ
ij
Ĵ
ĵ
Connect the SE-800 direct to a RMC-120 port or a Ethernet port on a computer and control the switcher using special computer software RMC-120 Ethernet Control Box Ķ
HUB
ķ ĸ Ĺ ĺ IJı IJIJ
ijĴ
ijij
RS-232 cable
Ethernet cable to computer
TCP/IP 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23
Joy stick and mode selector Voice sync adjustment Video input format selector Color processor Border control Background control Audio follow video switch Transition source selectors GPI function on/off button Audio channel selectors Play F1 to F30 by sequence Take function key
ijIJ
T-Bar Main video source selectors Sub video source selectors Chroma key control Preset Banks F1 to F30 Video effects: Picture in Picture Video effects: Paint controls Video effects: Mosaic controls Numeric Keypad Transition effects. Audio channel selectors
PIP
IJĶ
IJĵ IJĴ
IJij
RMC-140 A tally box that works with the SE-800 to display choices of next source.
RMC-120 This is an Ethernet (TCP/IP) based control box used in particular with the SE-800.
Next Source/Tally Box RMC-140 POP
IJĸ IJķ
DN-400 / DN-500 This is a DV/HDV hard drive recorder that comes with a removable 250GB hard drive disk and two hard drive enclosures. DN-500 comes with an additional rack mount.
Optional Accessories
Quad
ijı IJĺ IJĹ
NEXT
VP-314 This is an inline DV repeater that comes with 6-pin outputs.
What to Order
Menu selector
Tally light output (15pin & 3.5mm
RS-232 control output
4 x composite Video input
RS-232 control input
Monitor output (Quad,POP,PIP,and Next)
ITC-100 An intercom that accommodates up to 8 remote users. This set includes: case station, 20M (65ft) cables, headsets, belt packs and tally lights for 4 users. MP-6000 DVD +R/RW recorder with DV inputs which allows recording of media directly from most A/V sources, cameras, and analog VCRs’. RKM-4N7PK This is a holder for the SE-800; also includes space to hold TLM404H, TLM702 and ITC-100. TLM-404H 4 units of 4” TFT LCD composite monitor on a 19” rack mount; that is made from steel and aluminum.
TLM-702 This is a 2 unit; 7” TFT LCD monitors that comes with on screen display features and HD-SDI inputs.
Power (DC12V)
4 Full screen preview with tally indication
Designed specifically for the SE-800
DV CABLES - CA2066/CA1066/CA2266 CA 2066/CA1066/These are male to male fire wire cables: CA2066 is a 20 meter (65ft) cable, CA 1066 is a 10 meter (32ft), CA 2266 is a 1.8 meter (5.9ft).
21
SE-500 four-input SD video switcher The SE-500 is a compact, light weight, 4-channel analog video/audio switcher with a built-in Time Base Correction.
TLM-702 / 2 x 7” TFT LCD Optional Monitor Bank
The SE-500 accept S-Video (Y/C) and composite video signals, making it ideal for small churches, schools, clubs, or pubs – anywhere that you want a low cost, extremely reliable video / audio switcher. In addition to S-Video and composite Video, the SE-500 also provides component (Y:U:V) output. Features include dissolves, flicker free cuts, wipes, splits, PiP and a color processor. It also has built-in TBC for each channel for seamless switching. The SE-500 has a selectable quad-view output of the four inputs. You only need two video monitors — one for the source and one for program output.
Monitor output: preview may be displayed as PIP or Quad preview With the included breakout cable, one composite output and one S-Video output can be combined and converted into a component output Built in audio mixer with two microphone channels, one auxiliary video source output Digital processor - high image quality Digital effects - split, PIP, wipe, fade and quad display effect Illuminated backlit control buttons 5-pin MIDI control interface Headphone monitor with volume control NTSC or PAL video standards (not a dual standard device)
Specifications Video Inputs: 4x composite, 4x S-Video Outputs: 3x composite and 1x S -Video or 2x composite 1x component
The SE-500 can be manually operated or controlled via RS-232 & MIDI interface. SE-500 SE-500 model is a 4 input analog video and audio switcher that comes with a quad preview. RMC-150 This is an Ethernet (TCP/IP) based control box used in particular with the SE-500.
What to Order
Features
Audio Inputs: 2x unbalanced RCA and ¼” mic Outputs: 2x unbalanced RCA
TB-5 A tally box that comes with 4 indicators compatible with both the Datavideo SE-500 and SE-900. TLM-702 This is a 2 unit; 7” TFT LCD monitors that comes with on screen display features and HD-SDI inputs. RKM-572 This is a holder for the SE-500; also includes space to hold TLM-702.
Control RS-232 control interface
Power 12V 1.5A DC 110/220 power supply included
Rear View CV Input
Y:U:V Output
CV Output
RMC-150 Control
AUX In/Out Microphone Input
NO GENLOCK REQUIRED
MIDI Control S-Video (Y/C) Input
22
S-Video (Y/C)
Quad Preview
Tally output
DC In On/Off
SE-500 four-input SD video switcher Optional Accessories Ethernet Remote Controller
System Requirements
RMC-150 Ethernet Remote Control box is a PC/Network control box. Allows full control of SE-500 using our free software (Available
CPU: Pentium 4 © , 2.4GHz RAM: 512MB RAM Screen Resolution: 1024x768
OS: Windows XP or higher ©
Connection Diagram
Remote control software
COMPUTER
Connect the SE-500 directly to a RS-232 port on an computer and control the switcher using special computer software.
HUB
RS-232
TCP/IP
RS-232 CABLE ETHERNET CABLE
TB-5 Tally Box & Indicators
Power
15-Pin Tally or connector
Tall Out Tally TB-5 Tally Box & Indicators TB-5 Tally Box
&%
7' &$0
7%
7'
7 7'
&$0
7$//
