WiFi Hotspot Repeater Quick Start Guide. C. D. Enter “admin” for the username
and “admin” again for the password. Press “Log In”. E. Click on the “Easy Setup”
...
WiFi Hotspot Repeater Quick Start Guide
A
*
C
WiFi Hotspot Repeater Setup Guide Please Note: The USB Antenna Startup Guide & Installation are not needed to setup the Hotspot. Attach Antenna First
Open your Internet Browser screen and enter “192.168.2.1” into the Address Bar. Press “Enter” on your keyboard.
1
AC Power Adapter
3
D Connect Power
Enter “admin” for the username and “admin” again for the password. Press “Log In”.
Leave Unplugged
WiFi Hotspot Repeater Main USB Cable
2
Plug in a Compatable USB Antenna*
* You must follow these instructions carefully. *Compatable USB Antennas
Super USB WiFi Antenna 3
CC X Mile Long Range
E Click on the “Easy Setup” tab in the gray bar.
Versa WiFi USB Adapter 3
CC X Mile Omni
NOTE:
Although the WiFi Hotspot Repeater can be setup from a Tablet or Smartphone, it is much easier to use a computer and the supplied Ethernet cable to
B
F Click the dot next to “USB Wireless Adapter”.
Connect to the WiFi Network named “ALFA_AP” from your WiFi Network list. -ORCable: Connect the Ethernet cable between your computer and the WiFi Hotspot Repeater. Use the Ethernet port that is closest to your power connection.
Continued
1
2
WiFi Hotspot Repeater Quick Start Guide
G
WiFi Hotspot Repeater Quick Start Guide
J
Click on “Site Survey”.
Now you will choose an easy name to call your new WiFi Network. (Example: “BobsNetwork”). Enter it into the “SSID Choice” Do not use the same name as the network you are repeating.
H Scroll towards the bottom of the page. 1. Click the dot next to the WiFi Network that you want to repeat, then 2. Click “Select”. Note: For best performance, “signal” must be greater than 30/100.
1
K 1. Choose “WPA-PSK_WPA2-PSK” from the “Security Mode” dropdown. 2. Choose “Auto (TKIP/AES)” 3. Now create a wireless password and enter it into the “Pass Phrase” You must choose a password that contains between 8 and 64 characters. 4. Click on the “Done”
2
2
1
3
4
I 1. If your selected Network requires a password, then enter it into the space marked “Pass Phrase” *. Do not change any other settings. 2. Click on the “Next” button.
2
Please wait for up to one minute. Connect to it from the WiFi Network list on your device. Look for the name that you entered in step J and enter the Password that you entered in step K Congratulations, your new Network is ready to use ! TROUBLESHOOTING If you cannot access the Setup Screen then you may need to perform a factory reset. To do this, press the red button on the bottom for at least 5 seconds while it is powered ON. You may need to use a toothpick or paperclip to reach it. Allow 30 seconds for the hotspot to reset and startup before attempting setup again. Reset Button
1
* If the security mode is WEP, then enter password into “WEP Key 1”.
